Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.Note: The Driver Adapter is not required for installation using the Kelly Bar Adapter. The Kelly Bar Adapter mounts directly to the top plate of the anchor.For residential, ornamental, and walkway lighting with small bases. (wt. 46 lbs)
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
PB-5369-GLV
Foundation Anchor Assy, 3” Sch 40 x 4’-0”4-1/2” to 6-1/2” Bolt Circle, 1/2”-13NC Hardware
48”
(From Bottom of Plate)17-1/2”
7-3/4” 10”3-1/2”
1-3/4” x 3”Handhole Plate
Scraper
PB-5508-GLV
48”
(From Bottom of Plate)17-1/2”
8” 9”4”
2” x 4”Handhole Plate
Scraper
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.Note: The Driver Adapter is not required for installation using the Kelly Bar Adapter. The Kelly Bar Adapter mounts directly to the top plate of the anchor.For residential, ornamental, and walkway lighting with small bases. (wt. 49 lbs)
Foundation Anchor Assy, 3½” Sch 40 x 4’-0”4-1/2” to 6-1/2” Bolt Circle, 1/2”-13NC Hardware
2/16/18 Page U5-1
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Foundation Anchors
Brackets & Banding
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
56”
(From Bottom of Plate)17-1/2”
13” 10”4-1/2”
2 x 3”Handhole
PlateScraper
PB-5364-GLV
Foundation Anchor Assy, 4” Sch 40 x 4’-8”8-1/4” to 14-3/4” Bolt Circle, 3/4”-10NC Hardware
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.For residential lights, parking lots, and street lights. Typically for pole heights up to 16’. (wt. 94 lbs)
2/16/18Page U5-2www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Foundation Anchors
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
Foundation Anchor Assy, 6” Sch 40 x Length9” to 14” Bolt Circle, 1”-8NC Hardware
PB-5537 - - GLV48=4’-0”60=5’-0”72=6’-0”84=8’-0”
Length
Length(From Bottom of Plate)11-1/4”
12” 12”
2-5/8” x 12”Handhole
6-5/8”
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.48’ (wt. 115 lbs.); 60” (wt. 134 lbs.); 72” (wt. 152 lbs.); 84” (wt. 172 lbs.)
PB-5372-GLV
60”(From Bottom of Plate)11-1/4”
15” 13”
2-5/8” x 12”Handhole
6-5/8”
PlateScraper
Foundation Anchor Assy, 6” Sch 40 x 5’-0”10” to 15” Bolt Circle, 1”-8NC Hardware
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.For residential lights, parking lots, and street lights. Typically for poles ranging from 20’-30’ in height (wt. 167 lbs)
2/16/18 Page U5-3
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Foundation Anchors
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
Foundation Anchor Assy, 8” Sch 20 x 5’-0”11” to 17” Bolt Circle, 1”-8NC Hardware
60”(From Bottom of Plate)11-1/4”
15-3/4” 14”
2-1/2” x 12”Handhole
8-5/8”
Pelco’s schedule 20 foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt. 184 lbs)
PB-5534-GLV
60”(From Bottom of Plate)11-1/4”
18” 13”
2-5/8” x 12”Handhole
8-5/8”
PlateScraper
PB-5375-GLV
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. Plate scrapers loosen the soil for easy bolt installation from top of the plate. The square head bolts are held in place by the plate scrapers, which prevent them from turning.For street and highway lighting. Typically for poles ranging from 30’-50’ in height (wt. 239 lbs)
Foundation Anchor Assy, 8” Sch 40 x 5’-0”13” to 18” Bolt Circle, 1-1/4”-7NC Hardware
2/16/18Page U5-4www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Foundation Anchors
Note: 1. Foundation anchors are hot dip galvanized per ASTM A123. 2. All assemblies are supplied with Grade 5 Galvanized Bolts. 3. All assemblies with hardware are bagged in a nylon weatherproof bag.
Pelco’s SP-6360 schedule 20 foundation anchor is designed to be stabilized with a concrete footing. It features a top plate which enables the bolt head to be inserted after the anchor is installed. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.Typically for poles up to 30’ in height. (wt. 141 lbs)
SP-6360-GLV
120”(From Bottom of Plate)11-1/4”
15-3/4” 16”
3” x 12”Handhole
10-3/4”
Foundation Anchor Assy, 10” Sch 20 x 10’-0” 13-1/2” to 17” Bolt Circle, 1”-8NC Hardware
Foundation Anchor Assy, 8” Sch 20 x 5’-0”8” to 11” Bolt Circle, 3/4”-10NC Hardware
60”(From Bottom of Plate)12”
10” 16”
3” x 24”Handhole
10-3/4”
Pelco’s foundation anchors feature a top plate which enables the bolt head to be inserted after the anchor is in place. This eliminates the necessity of digging under the plate to install base bolts. The carriage bolts are locked in place by the slots in the top plate, which prevent them from turning.For street and highway lighting. Typically for poles ranging from 30’-50’ in height. (wt. 359 lbs)
PB-5535-GLV
2/16/18 Page U5-5
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Foundation Anchors
Note: 1. All assemblies are supplied standard with galvanized fasteners.
Driver Adapter, Foundation Anchorw/ 9” to 14-3/4” Bolt CircleSteel
PB-0604-ZN1
Required to connect the Kelly Bar adapter (not supplied) to the foundation anchor for installation. Special hole pattern permits installation of foundation anchors having bolt circle diameters of 9” to 14-3/4”. Zinc1 finish.
Kelly BarAdapter
Leveling Shim, 1/16” x 2” x 2”Galvanized Steel
PB-0602-GLV
Leveling Shim, 1/8” x 2” x 2”Galvanized Steel
PB-0603-GLV
2/16/18Page U5-6www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Foundation Anchors
Anchor Bolt Cage w/ Hardware1/2”-13NC x 7-1/2”, 36” Rebar5-1/2” Bolt Circle, Galv
AP-1049-GLV
Note: 1. All assemblies are supplied standard with galvanized fasteners. 2. Footing shall be determined by end user.
Concrete
AnchorBoltCage
Ground
Typical Footing Detail
2” Projection
2/16/18 Page U5-7
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Cages
Note: 1. All assemblies are supplied standard with galvanized fasteners. 2. Footing shall be determined by end user.
Anchor Bolt Cage w/ Hardware3/4”-10NC x 18”, 36” Rebar13” Bolt Circle, Galv
AP-1095-GLV
Concrete
AnchorBoltCage
Ground
Typical Footing Detail
3¼” Projection
Anchor Bolt Cage w/ Hardware3/4”-10NC x 18”, 36” Rebar8-1/2” Bolt Circle, Galv
AP-1089-GLV
Concrete
AnchorBoltCage
Ground
Typical Footing Detail
3½” Projection
2/16/18Page U5-8www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Cages
Note: 1. All assemblies are supplied standard with galvanized fasteners. 2. Footing shall be determined by end user.
Anchor Bolt Cage w/ Hardware1”-8NC x 36” Anchor Bolts11” Bolt Circle, Galv
AP-3129-GLV
Concrete
AnchorBoltCage
Ground
Typical Footing Detail
4” Projection
Anchor Bolt Cage w/ Hardware1”-8NC x 36” 15” Bolt Circle, Galv
AP-3136-GLV
Concrete
AnchorBoltCage
Ground
Typical Footing Detail
4” Projection
2/16/18 Page U5-9
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Cages
This page is intentionally left blank.
2/16/18Page U5-10www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Set of 4 w/ Hardware3/4”-10NC x 18”, Galv
PB-5306-GLV
Note: Includes 4 Bolts, 4 Washers, and 4 Nuts.
Note: Includes 4 Bolts, 8 Washers, and 8 Nuts.
Anchor Bolt Set of 4 w/ Hardware1/2”-13NC x 7-1/2”, Galv
AP-1046-GLV
Note: 1. All assemblies are supplied standard with galvanized fasteners.
2/16/18 Page U5-11
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Sets
Note: 1. All assemblies are supplied standard with galvanized fasteners.
Anchor Bolt Set of 4 w/ Plate Washers3/4”-10NC x 18”, Galv
PB-5371-GLV
Includes 4 Bolts, 4 Plate Washers, 4 Washers, and 4 Nuts.
Includes 4 Bolts, 4 Lock Washers, 8 Washers, and 8 Nuts.
Anchor Bolt Set of 4 w/ Hardware1”-8NC x 36”, Galv
AP-1007- -GLV1=12” Bolt Circle2=12.75” Bolt Circle3=11” Bolt Circle
Template
2/16/18Page U5-12www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Sets
Note: 1. See Reference Section for available paint colors.
15.38”Bottom
13”-15”Bottom BC
13.12”Top
10½”-13½” Top BC
Hardware Kit
Blank=NoneHK=Hardware Kit
PB-5517 - -Coating
PNC=Process No ColorP_ _=Paint
Hardware Kit
Blank=NoneHK=Hardware Kit
PB-5514 - -Coating
PNC=Process No ColorP_ _=Paint
10”-12” BCTop & Bottom
12.04”Top
13.08”Bottom
Transformer Base, TB2-17, Alumw/ Pelco Door & Galvanized Washers
Pelco’s TB2-17 Transformer Base stands 17” tall with a 12.04” square top, 13.08” square bottom, and has a 10”-12” top and bottom bolt circle. Comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers.
Pelco’s TB1-17 Transformer Base stands 17” tall with a 13.12” square top, 15.38” square bottom, and has a 10½”-13½” top bolt circle and 13”-15” bottom bolt circle. Comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers.
Transformer Base, TB1-17, Alumw/ Pelco Door & Galvanized Washers
2/16/18 Page U5-13
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Transformer Bases
Pelco’s TB1-17 Transformer Base stands 17” tall with a 13.12” square top, 15.38” square bottom, and has a 10½”-13½” top bolt circle and 10½”-1215/16” bottom bolt circle. Comes complete with an aluminum Pelco door and 8 heavy duty galvanized steel washers.
Transformer Base, TB1-17 Modified, Alumw/ Pelco Door & Galvanized Washers
Note: 1. See Reference Section for available paint colors.
Hardware Kit
Blank=NoneHK=Hardware Kit
PB-5538 - -Coating
PNC=Process No ColorP_ _=Paint
15.38”Bottom
10½”-1215/16”Bottom BC
13.12”Top
10½”-13½” Top BC
2/16/18Page U5-14www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Transformer Bases
For mounting base plates to the top of Transformer Bases. Includes 4 Hex Head Bolts, 8 Washers, 4 Lock Washers, and 4 Hex Nuts.
Hardware Kit, Transformer Base1”-8NC x 4”, Set of 4, Galv
PB-5437-GLV
2/16/18 Page U5-15
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Transformer Bases
Door Latch
T H
L
Plastic replacement doors for lighting pole bases are fabricated from tough hi-density UV inhibited plastic which offers excellent impact resistance. They give the appearance of aluminum, never needing painted and are a significant deterrent to vandalism since they have no scrap value. Pelco’s doors with-stand temperature extremes of -78o to +150o fahrenheit.
*BASE MFG
03
04
DESCRIPTION
Valmont, Flat
Union Metal, Flat
S
5/16”
5/16”
C/L
12-5/8”
13-5/16”
DOOR SIZEH TW BW
13-3/4” 7-15/16” 9-1/4”
13-15/16” 7-59/64” 9-1/4”
HOLED
3/8”
3/8”
LATCH L H T
N/A N/A N/A
N/A N/A N/A
*BASE MFG
05-06
07
12
19
DESCRIPTION
Valmont-Akron, Flat(TB-1AF, TB-2AF, TB-3AF)
A.B. Chance, Flat
Hapco, Flat(56631, 56632)
P & K, C-98612, Flat(M-81)
S
1/4”
3/8”
5/16”
3/8”
C/L
13-1/2”
13-5/16”
13-5/8”
16-21/32”
DOOR SIZEH TW BW
13-1/4” 9-1/8” 9-1/2”
13-7/8” 9-1/16” 9-13/16”
13-7/16” 9-1/8” 9-5/8”
16-1/2” 10-1/2” 13-1/2”
HOLED
3/8”
3/8”
3/8”
11/32”
LATCH L H T
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
N/A N/A N/A
*BASE MFG
01
08
15
16
22
DESCRIPTION
Kaiser, Curved w/ Latch
P & K, Flat w/ Latch(TB2A, TB2C, TB5C)
Akron, Flat w/ Latch(TB-20S)
Akron, Flat Short w/ Latch(TB-17S)
Akron, Curved w/ Latch(FP-5190)
S
3/8”
1/4”
1/4”
5/16”
3/8”
C/L
13-3/4”
11-7/8”
12”
11-1/8”
12”
DOOR SIZEH TW BW
14-7/8” 10-5/8” 11-3/4”
13-1/4” 8-1/4” 9-15/16”
13-3/8” 9-1/8” 9-5/8”
11-23/32” 9-1/8” 9-5/8”
13-5/16” 8-1/2” 9-1/2”
HOLED
11/32”
11/32”
5/16”
5/16”
11/32”
LATCH L H T
4-5/8” 1-3/4” 5/16”-18
3-1/4” 1-3/4” 5/16”-18
3-3/8” 1-7/8” 1/4”- 20
2-3/8” 1-1/8” 1/4”- 20
3-1/4” 1-3/4” 5/16”-18
TWD
HC/L
BW S
TW D
HC/L
BW S
TW D
HC/L
BW S
*BASE MFG
10
DESCRIPTION
P & K, Flat w/ Latch(REVERSED OPENING TB-1, TB-2)
S
9/16”
C/L
12”
DOOR SIZE H W BW
13-3/8” 8-3/8” 9-5/8”
HOLED
11/32”
LATCH L H T
3-1/4” 1-3/4” 5/16”-18
TW
D
H
C/L
BW
S
Transformer Door, Plastic
PB-0522- -PNC*See Chart
BaseManufacturer
2/16/18Page U5-10www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Plastic Replacement Doors
Note:1. All assemblies are supplied standard with stainless fasteners.2. Doors with latches include latch & vandal-resistant screw. Doors without latches are shipped without hardware.
*BASE MFG
13
25
DESCRIPTION
Valmont, Flat
FAB, Flat
S
5/16”
5/16”
C/L
12-15/16”
12-7/8”
DOOR SIZEH TW BW
13-7/8” 7-15/16” 9-1/4”
13-5/8” 8-1/2” 9-3/4”
HOLED
3/8”
5/16”
LATCH L H T
N/A N/A N/A
N/A N/A N/A
*BASE MFG
11
DESCRIPTION
P & K, Flat Short w/ Latch(TB-4)
S
5/16”
C/L
9-13/16”
DOOR SIZE H W BW
11-1/8” 9-9/16” 11-5/8”
HOLED
11/32”
LATCH L H T
3-1/4” 1-3/4” 5/16”-18
*BASE MFG
18
DESCRIPTION
Akron, Flat, Hinged w/ Latch(REVERSE OPENING TB-17H)
S
N/A
C/L
10-3/16”
DOOR SIZE H W BW
11-5/8” 9-1/8” 9-11/16”
HOLED
5/16”
LATCH L H T
3-3/8” 1-7/8” 1/4”- 20
*BASE MFG
24
DESCRIPTION
Union Metal, Flat w/ Latch
S
5/16”
C/L
3-5/16”
DOOR SIZE H W BW
13-3/4” 7-59/64” 9-1/4”
HOLED
13/32”
LATCH L H T
3-3/8” 11/16” 3/8”-16
*BASE MFG
14
DESCRIPTION
P & K, Curved, Small w/ Latch(HBS-6)
S
7/32”
C/L
4-1/2”
DOOR SIZE H W BW
5-1/4” 5-3/16” 6”
HOLED
9/32”
LATCH L H T
2-3/8” 1-1/8” 1/4”- 20
TWD
HC/L
BW S
TWD
HC/L
BW S
TW
D
H
C/L
BW
TWD
HC/L
BW S
TWD
H C/L
BW S
2/16/18 Page U5-11
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Plastic Replacement Doors
Note: 1. Febricated from black ABS plastic.
Conduit Cover, Pelco Topper,ABS Plastic w/ Safety Orange Reflectors8-1/2” to 15” Bolt Circle
PB-0530-PNC
Covers wiring temporarily, preventing damage or injury. Easily fits over installed anchor bolts and uses existing hardware. Made from durable ABS molded plastic.
2/16/18Page U5-12www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Conduit Topper
The Bolt Template is a reusable “tool” used for layout of bolts to be used in concrete for the future installation of poles. Constructed of UV stabilized ABS plastic, the Bolt Templatemay be used for various bolt patterns from 5-1/2” up to 25-1/2”. Accepts multiple conduits through the center with the capacity for up to two 2” conduits and multiple smaller conduits at one time.
Note: - Quick, easy set-up in minutes- 41 different bolt circle patterns,
5-1/2” to 25-1/2”- Easy guide divots every 1/2”- Reusable
Anchor Bolt Template, ABS Plastic
AP-3085-PNC
Note: 1. Febricated from black ABS plastic.
2/16/18 Page U5-13
www.pelcoinc.com - [email protected] - 405-340-3434 - fax: 405-340-3435
UTIL
ITY
PR
OD
UC
TS
Anchor Bolt Template