Forum LED - disano.it LED_3_ING.pdf · 2 3 FLICKER LOW SURGE p. 4 p. 8 p. 16 p. 18 p. 24 p. 26 p. 28-29 p. 32 p. 33 p. 34-35 p. 38 p. 39 p. 40-41 p. 14 p. 6 p. 12 p. 10 Forum LED

M A D E I N I T A L Y

Forum LED

www.disano.it

Floodlights for the lighting of large areas and sport facilities

2 3

FLICKER

LOW

SURGE

p. 4

p. 8

p. 16

p. 18

p. 24p. 26

p. 28-29

p. 32p. 33

p. 34-35

p. 38p. 39

p. 40-41

p. 14

p. 6

p. 12

p. 10

Forum LED - 1 module

Forum LED - 2 modules


ASYMMETRICNARROW BEAMSYMMETRIC



The Forum LED rangeFloodlights for the lighting of

large areas and sport facilities

Key features, performance, advantages

Tips on choosing the best lighting sourcesand amount of lux required

Integrated safety devices and luminous flux regulation

Examples of possible applications

Mounting instructions

CRI 90, low flicker and ripple

Light distribution: narrow, symmetric and asymmetric beam

Floodlight technical features

4 5

L70B2070.000h

h 10.000

20%

40%

60%

80%

100%

30.00020.000 40.000 60.00050.000 70.000

70 % 120.000 h (L70B20) 700 mA

70 % 100.000 h (L70B20) 1050 mA

70 % 70.000 h (L70B20) 1200 mA

80 % 100.000 h (L80B10) 700 mA

80 % 80.000 h (L80B10) 1050 mA

80 % 50.000 h (L80B10) 1200 mA

LED Life expectancyLEDs, unlike traditional sources, will not turn off suddenly when their working life ends, but will slowly fade their initial luminous flux until they turn off completely. In fact, LEDs do not break (except for manufacturing

damages) but decay gradually and constantly. The decrease of LED flux is defined by the working life and is represented by the “L” mark (for example L70 which means that the flux is kept up to 70%). The “B” followed by a number ranging between 10 and 50 indicates the quality of the fixture and defines the LED percentage that doesn’t keep the declared characteristics.

LUMINOUS FLUX %

EXAMPLE: LED declared L70B20 = 70000 hrsThis means that when the LED reaches 70000 hours of operation, 80% (B20) of the LED will have a luminous flux corresponding to 70% of the initial flux (L70).The range of Disano’s Forum floodlights, a global top seller in

the lighting of large areas and sport facilities, introduces the new Forum LED.

Drawing from an extensive experience in discharge lamp pro-jectors, Forum LED stands out thanks to the use of the most reli-able and sophisticated technology and latest generation LED sources.

Forum LED is a modern floodlight equipped with all the solu-tions to guarantee very high performance levels, excellent light control, easy installation and long lamp life.

The extreme versatility of its optical design guarantees the ad-justment to different application needs, ensuring high perfor-mance in any setting compared to any other floodlight featuring more traditional technology.

Key features

equipped with special devices for per-fect pointing and positioning stability.

and electronic components ensures full safety during operation, guaranteeing total resistance to im-pacts and accidental collisions, thermal shocks and weather agents.

of power, lumen and luminous beams; in fact, it is available in versions with single, double or triple modules, with asymmetric light distribution, narrow beam angles ranging from 8° to 17°, or symmetric beams from 30° to 120°.

-teeing high levels of light quality, eliminating flicker during TV broadcasting.

Performance and advantages

excellent colour rendering and light output. The very advanced LED sourc-es, even with colour temperatures of min. 5700K and CRI 90, are ideal to enable perfect high definition TV cov-

erage

their use in large areas as well as in stadiums or indoor and outdoor arenas, providing unprecedented performance in any setting

-tion of the LED source into the floodlight guarantee precision and high performance: intrusive and glaring light in the sur-rounding areas is minimised for the benefit of visual wellbeing for players and viewers alike

Forum LED: maximum performance, very high visual comfort and extreme flexibility

One of a kind!!!

Energy saving All the floodlights of the Forum LED range were designed for applica-tions that require great power outputs, thanks to the adoption of advanced technology that allows the fixture to adjust to every design need. The high

power LEDs in the optical units are optimised to guarantee maximum energy savings as well as visual comfort.

The example below compares Forum LED with a traditional discharge lamp: with a similar luminous flux (the luminous flux of Forum LED is greater than 5%), you have savings of about 40% in terms of energy efficiency.

FORUM LED life expectancy:power factor: 0,92. Luminous flux maintenance:

76

CRI 90

RIPPLEFREE

...%FLICKER

LOW

I out

t

700

I out

t

700 7

980

A

B

420

Best quality lighting Lighting and luminaires play a key role in sales. This is why retailers are demanding LED fixtures with CRI>90. The colour rendering index (CRI) in-dicates how the colours of an object are reproduced when illuminated by

an artificial light source. It is a scale from 0 to 100, where 0 represents the lowest accuracy and 100 is the maximum accuracy. Daylight is the best source of light from the physi-ological point of view thanks to the completeness of its col-our spectrum; this is why the choice of fixtures with a high colour index is very important to enhance people’s sense of wellbeing and comfort and it is particularly needed in rooms where a faithful reproduction of colours is required.

Figure 2: in the absence of a suitable heat sink, the excess temperature of area “A” is not balanced by zone “B”, with the result that the LED junction temperature will be higher than the

Quality LED drivers come with a sophisti-cated multistage circuit to power LED with an ideal current source (one line), without overloads (Figure 1). By “ripple” we mean the dimension of the

output waveform of a LED driver. Despite the oscillation occurs at frequencies

that cannot be perceived by naked eye, evidence shows that the human brain can perceive light oscillations up to 200 Hz

problems include headaches, eye strain, distorted vision and, in some cases, even epileptic seizures.Figure 2 shows the greatest impact on LED life at high tem-peratures: the LED appears to be overpowered in zone “A” and underpowered in zone “B”.

Figure 2. A: LED overpowered, B: LED underpowered

Figure 1. LED powered with ideal current

Ripple = 57%

Flicker is a common issue with LED lamps. It can occur at fre-quencies below 60 Hz and depends on several factors, such as the ripple emitted by drivers. The notion of flicker-free is very different from that of ripple-free. Ripple is most commonly used by driver manufacturers. Furthermore, “flicker-free” does not mean “without” but rather “very low”.

a very low flickerof flicker

The Low Flicker pictogram (LF)

Flicker and video coverageIt is important to consider that light oscillations provoke effects during video broadcasting, where images appear crossed by numerous black lines, making watching impossible. In addition to this, high current oscillations have a negative effect on LEDs, on the driver life and on the efficiency of the entire lighting sys-tem.

Light with no glare Lighting must meet the needs of international events in terms of efficiency and high-definition TV broadcasting, which require high levels of luminance, light uniformity, excellent colour ren-dering and greater attention the visual comfort of spectators and athletes with a light without glare.

At Disano’s photometric laboratory, tests on lamps and luminaires are compliant with IES LM-79-08 and UNI-EN 13032-4 standards.

During a broadcast it is not uncommon to perceive an annoying flicker especially dur-ing slow motion. This flicker is distracting and should be eliminated where possible. The circumstances that produce the flicker vary upon the frequency modulation, voltage and camera frame rate. The table below provides a general rule of flicker factor values produced by various lighting systems. A flicker factor of less than 5% will generally not cause problems for slow motion replays at up to 150 frames per sec-ond. A lighting system with a flicker factor of less than 5% will eliminate the perceived flick-er at most frame rates per second used within the sports television industry. The acceptable level of flicker factor (FF) is indicated in the Illuminance Category Tables.

Guidelines for TV broadcasts with LED lighting systems

Flicker Factor Reference Table

Type of Illuminance System FF value (guide only)

Daylight 0 %

LED Luminaires% of flicker depends upon the type of LED power supply

<3 %

Discharge lamps with high fre-quency ballasts

<4 %

Discharge lamps with 3-phase magnetic ballasts for uniform light

8-20 %

Discharge lamps with single-phase magnetic ballasts

30-50 %

Luminous stability Safety and quality

Quality light without glare for high-resolution TV

Forum LED is equipped with LED:

for 1 module version;CRI 70-80 (4000K) and CRI 70-90 (5700K) for 2 modules

version;for 3 modules version;

98

A modern stadium is a concentration of emotions and technologyLight stability is a fundamental require-ment for good quality TV resolution. Modern stadiums are a concentration of emotions and technology. Sport facil-ities are now multi-purpose structures,

designed to host different types of events and built according to new environmentally friendly criteria, attracting an ever larger audience.

Tips on choosing the best lighting sources

and amount of lux required

TV broadcasting

SYSTEMSLevel (a)

OUTDOOR (B) INDOOR (B)

Note Average luminance (lux)

Average luminance (lux)

Specific luminance (lux)



Specific luminance (lux)

ATHLETICS 3 500 0,7 1000 (1) 500 0,7 1000 (1)

(1) fotofinish

2 200 0,5 300 0,6 1 100 0,5 200 0,5

SWIMMING3 500 0,7 500 0,7 2 300 0,7 300 0,7 1 200 0,5 200 0,5

BASEBALL 3 750 (1) 0,7(1) 750(1) 0,7(1)

(1) infield 2 500 (1) 0,5(1)

1 300 (1) 0,5(1) 3 500 0,7 2 200 0,6 1 75 0,5 3 500 0,7 750 0,7 2 200 0,7 500 0,7 1 100 0,5 200 0,5

CYCLING 3 500 0,7 1000 (1) 750 0,7 1000 (1) (1)

fotofinish vert. plane

2 300 0,7 500 0,7 1 100 0,5 200 0,5

3-2 100 (1) 0,8 100 (2) (1) tee (2) hole

GYMNASTICS 3 500 0,7 2 300 0,6 1 200 0,5

(FIELD AND 3 500 0,7 750 0,7 2 200 0,7 500 0,7 2 200 0,7 300 0,7 3 500 0,7 750 0,7 2 200 0,5 500 0,6 1 100 0,5 300 0,5

HANDBALLWRESTLING

WEIGHTLIFTING

3 500 0,7 750 0,7

2 200 0,6 500 0,7

1 100 0,5 200 0,5

3 2000 (1) 0,8 (1) on the ring 2 1000 (1) 0,8

1 500 (1) 0,5

RUGBY 3 500 0,7 2 200 0,6 1 75 0,5

EQUESTRIAN 3 500 0,7 500 0,7 2 300 0,6 200 0,5 1 200 0,5 100 0,5 3 200 0,6 1000 (1) 200 0,6 1000 (1)

(1) fotofinish 2 200 0,6 200 0,6

1 80 0,5 80 0,5 3 750 0,7 750 0,7 2 500 0,7 500 0,7 1 200 0,5 300 0,7

SQUASH 3 750 0,7 2 500 0,7 1 300 0,7

TENNIS 3 500 0,7 750 0,7 2 300 0,7 500 0,7 1 200 0,6 300 0,5

3-2-1 200 0,5 500 (1) 300 (2)

200 0,5 500 (1) 300 (2)

(1) target (2) platform

N.B.: Level: (a) 1. Non professional level - 2. Local professional level - 3. National and international professional level(b) All luminance values, except otherwise stated, refer to the horizontal plane that matches the surfaces where the activity takes place (water surface for swimming activities).

Below are the “Recommended values for indoor and outdoor sports lighting” (refer to Standard UNI EN 12193 for further details):

UEFA illuminance requirements: Elite level AEh ave (average horizontal illuminance) > 2,000 luxUniformity U1h Uniformity U2h > 0.50 > 0.70

Ev ave-0° (vertical illuminance on 0° reference plane) average > 1,500 luxminimum > 1,000 lux

Uniformity U1v-0° Uniformity U2v-0° > 0.40 > 0.50







Match continuity mode (MCM) Eh ave >1,000 luxEv4 ave > 600 lux

Flicker factor (FF) average < 5% - maximum< 5%Minimum adjacent uniformity ratio (MAUR) > 0.60Colour temperature (Tk)Colour rendering 80 RaMaintenance factor (MF) 0.85

Elite level A

Overview of illuminance levels for UEFA competitions

Type of match UEFA illuminance level

Elite level A

Level A

Level B

Level C

knock-out rounds (excluding final(s))

Level D

350 lux

UEFA illuminance requirements : Level BEh ave (average horizontal illuminance) > 1,400 luxUniformity U1h Uniformity U2h > 0.50 > 0.70

Ev ave-0° (vertical illuminance on 0° reference plane) average > 1,000 luxminimum > 600 lux








Match continuity mode (MCM) Eh ave > 600 lux Ev4 ave > 300 lux

Flicker factor (FF) average < 12% maximum < 15%

Minimum adjacent uniformity ratio (MAUR) > 0.60Colour temperature (Tk)Colour rendering 80 RaMaintenance factor (MF) 0.80

Level B

1110

280cm2 1330cm2 900cm2 3090cm2

1040cm2 1040cm2 4230cm2

20°

20°

20°

20°

20°

20°

Wiring: 2 LED modules: 220-240V 50/60Hz power supply; with

external driver applied to the fixture.

3 LED modules: separate driver; 400V power supply for retrofitting exiting systems is available upon request. Upon request the 3 modules version can be equipped with a driver featuring protection level IP20 (to be inserted into the electrical cabinet) or IP66 based on the type of installation (see page 16).

Surface exposed to wind

Complete with protractor scale for precise aiming

of the floodlight.

Graduated scale on both sides. The tilting angle is 5°. Tilting range is between +20° and -20° with respect to the 0° (hori-zontal) position.

The heat dissipation system was designed and manufactured to allow LED operation at adequate temperatures and guaran-tee excellent performance/efficiency and long life.

in die-cast aluminium with cooling fins.

Optics: made of V0 polycarbonate, metallized high yield.

Diffuser: extra-clear, tempered glass, 4 mm thick, resistant to thermal shock and impacts.

Coating: the standard powder coating consists of a first metal surface pre-treatment stage and of single layer of UV-stabilised, corrosion and salt resistant polyester powder coating.

On request: Corrosion tests in artificial atmospheres for aggressive environments.

Standard Supply: complete with galvanised and coated bracket. Single LED module version, equipped with air-tight connector for mains connection. Electronic safety device to protect the LED module and the related ballast compliant with EN 61547. With dedicated electronic device to protect the LED module.

ISO 9227UNI EN

Forum LED:

with all the quality of made in Italy design

Technical features

Upon request: the fixture can be equipped with several light dimmers:- 1-10V (dimmable from 20% to 100%) or DALI dimmable driver

inserted inside the pole)- wireless control system (inserted inside the pole)

LED characteristics:for the versions with 1/3 modules) and

Working temperature: -30°C / +40°C.

: 0,92 - Luminous flux maintenance:70% 120.000h (L70B20) 700mA

70% 100.000h (L70B20) 1050mA

70% 70.000h (L70B20) 1200mA

80% 100.000h (L80B10) 700mA

80% 80.000h (L80B10) 1050mA

80% 50.000h (L80B10) 1200mA

12 13

XS

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

W

100

200

300

400

500

600

700

800

900

1000

cd/klm

XW

50

100

150

200

250

300

350

400

450

500

cd/klm

MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

M

250

500

750

1000

1250

1500

1750

2000

cd/klm

P0 - Tilt 50°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P3 - Tilt 65°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P6 - Tilt 40°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P1 - Tilt 55°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P4 - Tilt 70°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P7 - Tilt 35°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P2 - Tilt 60°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P5 - Tilt 45°

250

500

750

1000

1250

1500

1750

2000

cd/klm

P8 - Tilt 30°

250

500

750

1000

1250

1500

1750

2000

cd/klm

W K CRI

1050 mA 367 4000 70

1200 mA 423 4000 70

W K CRI

700 mA 713 4000 70

700 mA 713 5700 90

1200 mA 1270 4000 70

1200 mA 1270 5700 90

W K CRI

700 mA 713 4000 70

700 mA 713 5700 90

1200 mA 1270 4000 70

1200 mA 1270 5700 90

W K CRI

700 mA 713 4000 70

700 mA 713 5700 90

1200 mA 1270 4000 70

1200 mA 1270 5700 90

W K CRI

700 mA 475 4000/5700 70

700 mA 475 4000 80

700 mA 475 5700 90

1050 mA 735 4000/5700 70

1050 mA 735 4000 80

1050 mA 735 5700 90

W K CRI

700 mA 475 4000/5700 70

700 mA 475 4000 80

700 mA 475 5700 90

1050 mA 735 4000/5700 70

1050 mA 735 4000 80

1050 mA 735 5700 90

W K CRI

7700 mA 475 4000/5700 70

6700 mA 475 4000 80

700 mA 475 5700 90

1050 mA 735 4000/5700 70

1050 mA 735 4000 80

1050 mA 735 5700 90

W K CRI

700 mA 237 4000 70

1050 mA 367 4000 70

1200 mA 423 4000 70

W K CRI

700 mA 237 4000 70

1050 mA 367 4000 70

1200 mA 423 4000 70

1 module

1 module

1 module

1 module

3 modules

3 modules

3 modules

2 modules

2 modules

2 modules

1 module

1 module

2 modules

2 modules

2 modules

3 modules

3 modules

3 modules

The family of Forum LED floodlights includes versions with narrow, symmet-ric and asymmetric beam optics with different, highly efficient LED sources in order to insert the most suited fixture into any lighting project and achieve the required lighting, while optimizing

the use of light.

Symmetric beam optics:

Asymmetric beam optics: AS; version with 2-3 modules and adjustment range of ±20° with respect to the horizontal position (0°)

Light distribution: narrow, symmetric

and asymmetric beam

Technical features Photometric distributions

Asymmetric tilts from P1 to P8 can be ob-tained only with the version featuring 2 and 3 modules

Asymmetric tilt P0

Narrow beam optics:

The modularity of the optical system, the solutions used for the electronic circuit design and the optical control of operating temperatures, make the Forum LED product a highly profes-sional, flexible and reliable lighting fixture, capable of guaran-teeing huge application advantages in several situations.

polycarbonate. The metallized finish reduces glare while increasing visual comfort.

The extra clear 4 mm thick tempered glass is resistant to thermal shocks and impacts in order to ensure adequate optics protection and easy cleaning of the spotlight, guaranteeing high per-formance.

14 15

45°45°

45°

45°

5°

5°5°

90°

90°

CLACK

45°

5°5°

70 70

7070

22x35

ASYMMETRIC beam

SYMMETRIC beam

Acc. 60Ø60/76 mm pole mounting

High design flexibility andcombination of optics,

easy installation

Easy-to-installVersions with 1-2 modules can be in-stantly connected to the electrical pow-er line through an cable, while the versions with 3 module are connected to the terminal block inserted into a separated watertight box. Another dis-

tinguishing feature of Forum LED is that it is extremely easy to install, thanks to its frame body that, in the version with 2-3 mod-ules, has a housing for the floodlight’s support bracket, which also features a graduated scale to allow accurate pointing of each single module at an angle of +/- 20° to its horizontal axis.

Forum LED comes with a galvanized and coated bracket with right angle base plate to install the projector on both sides of acc. 60 (not supplied with the product) for mast-top mounting.

Mounting instructionsDesigned to fit your needs!!!

Lighting is ever more important in any setting. A lighting solution designed according to the most advanced standards reduces running costs and improves visibility, therefore increasing safety. In this special case, the extreme versatility of the optics mounted in Fo-

rum LED guarantees the fixture’s suitability to all application needs, ensuring higher performance in any circumstance com-pared to projectors featuring traditional technology.

Virtually no maintenance The replacement of damaged lamps or of entire systems often requires huge investments both in terms of time and money, especially if you need to act on systems installed at heights. With prod-ucts that are easy to mount and with no

need for maintenance, you can minimise both running costs and labour force.

Upon request, it is possible to equip 2-3 module products with mixed optics, combining different lighting distributions in order to obtain the ideal lighting for any setting.

1) entrance – athletic track 2) football field

Upon request: stand for spotlights’ pointer system.

16 17

100%

30%

240V 215V 170V

10%

DIMM1-10V

100%

SURGE

770180

140

490

146

170

Light dimmingIn order to exploit the energy-saving potential of LED technology, lighting fixtures are equipped with an internal electronic system comprising a micro-processor which controls the luminous flux from 20 to 100%, making energy

savings increase accordingly. This will enable users to oper-ate a lighting fixture at reduced power rates in specific applica-tions, according to programmable periods of time.

1-10V dimming20%-100% dimming

with 1-10V system (subcode -12)

State-of-the-art technology to make Forum LED

safer ... and SMART !!!

Safety guaranteedForum LED was designed with a number of solutions to maximi-se safety and increase system usage:

-lable on the market to guarantee operation of electronic compo-nents at low temperatures;

All these features help make the entire family of Forum LED pro-ducts the safest of its range.

Safe and ... SMART !!! Versions available upon request

IP20 DRIVER- the driver box inside the electrical cabinet is to be installed in the upright position- install a temperature sensor between two driver boxes- the temperature measured by the sensor must be below 45°C- keep the electrical cabinet away from direct sunlight- use a cooler to ensure that the maximum temperature inside the electri-cal cabinet remains 45°C throughout the year

acc. Driver IP207.00 700mA7.00 1200mA

Technical characteristics

ambient temperature: -40°C + 45°C input voltage AC: 220-240Vfrequency: 50/60Hzpower factor: 0.97

acc. Driver IP664.80 700mA5.40 1200mA

Technical characteristics

(400V upon request)

0.95

Upon request: Forum 3 modules, can be equipped with a driver with a protection class of

on the type of installation.

DRIVER versions 700mA - IP20 1200mA - IP20 700mA - IP66 1200mA - IP66

DIMM DALI

programmable programmable upon request upon request

6kV Surge (10kV upon request)

*CLO (Costant Lumen Output) programmable programmable upon request upon request

*CLO = Costant Lumen Output (constant luminous flux is maintained throughout the product’s life).

This solution includes a user interface and a dedicated control system for quick and easy operation, monito-ring and switching the lights from one configuration to the other. Forum LED’s control system can also be used to create special light effects that normally requi-re separate devices.

Forum LED for the entertainment sector (upon request)

IP20 - IP60 Driver characteristics (Forum 3 modules)

Surge

Every year, lighting managers are cal-led to face the numerous damages caused by lightning and overcurrents. To protect lighting installations from surge, i.e. the rapid increase in volta-ge between parts of opposite polarities

and/or the ground, Disano has equipped its luminaires with an EN 61547 compliant surge protector, capable of protecting the LED module and their related driver from voltage spikes.

It operates in two modes:

differential mode: surge between power conductors, between the phase conductor to the neutral conductor. Substantially, between phase (L) and neutral (N) no sub-stantial surges are present because voltage peaks are suppressed by other equipment connected to the power line; as a consequence a lower surge protector is suffi-cient. Depending on the type of product, Disano provides a protection from surges of up to 6 kV.

common mode: surge between power conductors, L/N, to the ground or the body of the luminaire if it is classified

in the common mode are generated by lightning strikes and may reach very high levels. Depending on the type of product, Disano provides a protection from surges of up to 8 kV (10kV upon request).

IP66-1200mA DRIVER CABLE INSTALLATION

DISTANCE BETWEEN SHIELDING

CENELEC

30 m 5G1,5 CE + 7G1,5 CE

100 m YES 5G1,5 CE + 7G1,5 CE

IP66-700 DRIVER CABLE INSTALLATION

DISTANCE BETWEEN SHIELDING

CENELEC

30 m 5G1,5 CE + 5G1,5 CE

100 m YES 5G1,5 CE + 5G1,5 CE

18 19

art. 2185 AS

250

500

750

1000

1250

1500

1750

2000

cd/klm

art. 2186

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

art. 2187 S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

art. 2180 MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

art. 2181 M

250

500

750

1000

1250

1500

1750

2000

cd/klm

art. 2182 W

100

200

300

400

500

600

700

800

900

1000

cd/klm

art. 2183

50

100

150

200

250

300

350

400

450

500

cd/klm

Buildings and façadesIn the lighting of buildings and façades, attention is placed on functional aspects, as well as on architec-tonic and aesthetic elements. First of all, it is important to ensure the perfect lighting of road signs and entrance areas in order to guide vi-sitors easily and safely. Moreover, there is the need to enhance the building’s architecture, highlighting those elements that make the building recognisable.

ApplicationsA truly complete range of products of-fering the best performance to meet all outdoor lighting needs for:

stations and loading/unloading bays

parks and transit zones

court, basketball court, swimming pool, velodrome, hockey rink, volleyball court, etc...).

Uniform, efficient and safe lighting for any design requirement

Version with 1 module

Outdoor areasThe lighting of outdoor areas, such as loading/unlo-ading bays, is a very delicate and difficult element in a lighting design project. The perfect visibility of outdoor areas must be guaranteed at any time of the day and under any weather condition.

themselves. Therefore in outdoor areas, lights should be sufficiently bright and above all without glare. The light emitted by the modular optical de-sign makes Forum LED particularly suited for this type of area. Furthermore, thanks to different pho-tometric distributions, it can adjust with great fle-xibility to any design requirement, because every outdoor area has different needs.

Ideal for... energy savings

Asymmetric tilt P0

1 module - NARROW BEAM

1 module - SYMMETRIC BEAM

1 module - ASYMMETRIC BEAM

20 21

Industrial areasThe working conditions in industrial manufacturing areas require highly resistant lighting fixtures. The accumulation of dust or the presence of humidity may vary depending on different industrial sectors and types of plant.

Ideal for ... ... industrial areas and outdoors

Visibility is even more important because it can af-fect productivity and safety. This is why Forum LED is studied to guarantee continuous operation with high lighting performance. Thanks to the high degree of protection, the entire range of Forum products can resist effectively to both weather conditions and me-chanical shocks and vibration, without affecting the quality of the light or the lamp’s life

22 23

InfrastructureTrain stations, airports and large transit areas are re-garded as “landmarks”, i.e. well defined signs of a city’s ambition and desire for renovation. This is why the design of major infrastructure is being entrusted to world-famed architects. Lighting should meet fun-ctional requirements and also enhance the challen-ging solutions chosen by the designers. Lighting be-comes an integral part of these public works, turning into structural elements giving them extraordinary visibility during the evenings. This new approach also applies to small train stations and roads, where proper lighting can increase safety, efficiency and energy savings and improve aesthetics.

Ideal for ... ... train stations and airports

2524

CRI

70

256W=>8%397W=>8%457W=>8% FLICKER

LOW

SURGE

256W=4/6kV397W=4/6kV457W=6/6kV

IP66IK08EN

EC

214

195

140

281

642

180°

22x35

Ethr2185 - AS

250

500

750

1000

1250

1500

1750

2000

cd/klm

L 280cm2

F 1330cm2

21

250

500

750

1000

1250

1500

1750

2000

cd/klm

L 280cF 1330F F 1330

522

187

4000K

AsymmetricForum LED - 1 module

2185 Forum - 1 LED MODULE - asymmetric - “AS”CLD CELL LUMEN OUTPUT (Tq=25°C)

wattage (700mA) colour weight code W tot K - ølm 700mA - CRI

LED graphite 15.00 412650-00 256 27487 lm - CRI 70wattage (1050mA) K - ølm 1050mA - CRI


LED graphite 15.00 412652-00 457 40160 lm - CRI 70

Optics: made of V0 polycarbonate, metallized high yield.Wiring : 220-240V 50/60Hz power supply; with external driver applied to the fixture. On request:

The reported luminous flux is the flux emitted by the light source with a tolerance of ± 10% compared to the indicated value. The W tot column indicates the total wattage absorbed by the system without exceeding 10% of the indicated value.

acc. 25 protection guardblack 997930-00

-tion against impact. For art. 2180-2181-2182-2183-2185.

LU

ME

N O

UT

PU

T

2726

4000K

CRI

70

397W=>8%457W=>8%

FLICKER

LOW

SURGE

397W=4/6kV457W=6/6kV

CRI

70

397W=>8%457W=>8%

FLICKER

LOW

SURGE

397W=4/6kV457W=6/6kV

IP66IK08EN

EC

IP66IK08EN

EC

228

195

140

281

642

180°

22x35

Ethr2186 - XS

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

L 280cm2

F 1330cm2

228

195

140

281

642

180°

22x35

Ethr2187 - S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

L 280cm2

F 1330cm2

48214

7

4000K

Forum LED - 1 module Narrow beam

2186 Forum - 1 LED MODULE - narrow beam - “XS”CLD CELL LUMEN OUTPUT (Tq=25°C)



LED graphite 15.00 412662-00 457 44679 lm - CRI 70Optics: made of V0 polycarbonate, metallized high yield.Wiring : 220-240V 50/60Hz power supply; with external driver applied to the fixture. On request:

2187 Forum - 1 LED MODULE - narrow beam - “S”CLD CELL LUMEN OUTPUT (Tq=25°C)






-tion against impact. For art. 2186-2187.

LU

ME

N O

UT

PU

TL

UM

EN

OU

TP

UT

2928

SURGE

256W=4/6kV397W=4/6kV457W=6/6kV

256W=>8%397W=>8%457W=>8% FLICKER

LOW

SURGE

256W=4/6kV397W=4/6kV457W=6/6kV

256W=>8%397W=>8%457W=>8% FLICKER

LOW

CRI

80

CRI

70

214

195

140

281

642

180°

22x35

214

195

140

281

642

180°

22x35

IP66IK08EN

EC

IP66IK08EN

EC

4000K

4000K

CRI

70

256W=>8%397W=>8%457W=>8%FLICKER

LOW

SURGE

256W=4/6kV397W=4/6kV457W=6/6kV

IP66IK08EN

EC

IP66IK08EN

EC

214

195

140

281

642

180°

22x35

214

195

140

281

642

180°

22x35

CRI

70

256W=>8%397W=>8%457W=>8%FLICKER

LOW

SURGE

256W=4/6kV397W=4/6kV457W=6/6kV

522

187

4000K

4000K

Ethr2180 - MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

L 280cm2

F 1330cm2

Ethr2182 - W

100

200

300

400

500

600

700

800

900

1000

cd/klm

L 280cm2

F 1330cm2

Ethr2181 - M

250

500

750

1000

1250

1500

1750

2000

cd/klm

L 280cm2

F 1330cm2

Ethr2183 - XW

50

100

150

200

250

300

350

400

450

500

cd/klm

L 280cm2

F 1330cm2

Symmetric

LU

ME

N O

UT

PU

TL

UM

EN

OU

TP

UT

2180 Forum - 1 LED MODULE - symmetric - “MS”CLD CELL LUMEN OUTPUT (Tq=25°C)

wattage (700mA) couleur weight code W tot K - ølm 700mA - CRI




2181 Forum - 1 LED MODULE - symmetric - “M”CLD CELL LUMEN OUTPUT (Tq=25°C)






LU

ME

N O

UT

PU

TL

UM

EN

OU

TP

UT

2182 Forum - 1 LED MODULE - symmetric - “W”CLD CELL LUMEN OUTPUT (Tq=25°C)





2183 Forum - 1 LED MODULE - symmetric - “XW”CLD CELL LUMEN OUTPUT (Tq=25°C)







-tion against impact. For art. 2180-2181-2182-2183-2185.

30 31

art. 2195 AS

250

500

750

1000

1250

1500

1750

2000

cd/klm

art. 2196

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

art. 2197 S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

art. 2190 MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

art. 2191 M

250

500

750

1000

1250

1500

1750

2000

cd/klm

art. 2192 W

100

200

300

400

500

600

700

800

900

1000

cd/klm

art. 2193

50

100

150

200

250

300

350

400

450

500

d/klm

Sport facilitiesThe rules of sports lighting are dictated by ever more demanding high-definition TV broadcasting requirements. Major football stadiums require a very high level of evenly distributed lighting that should be achieved according to new sustaina-ble criteria in order to minimise consumption and reduce lighting pollution. The floodlights of the Forum LED range guarantee maximum efficiency, reliability and energy savings for any sport centre, including school gyms, tennis courts, sport arenas,

-pic venues.

Version with 2 modules nce lightingIdeal for... high performan

2 modules - SYMMETRIC BEAM

2 modules - NARROW BEAM


2 modules - ASYMMETRIC BEAM

* Asymmetric tilts from P1 to P8 can be obtained only with the version featuring 2 and 3 modules.

* Asymmetric tilt P0

Version with 2 modules and adjustment range of ±20° with respect

to the horizontal position (0°)

3332

IP66IK08

IP66IK08

2196 - XS

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

2197 - S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

L 1040cm2

F 4230cm2

5700K

L 1040cm2

F 4230cm2

140

627

303

673

114

22x35698

627 114

±

20°

140

627

303

673

114

22x35698

627 114

±

20°

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

IP66IK08

140

627

303

673

±

20°

22x35698

627 105

105

2195 - AS

250

500

750

1000

1250

1500

1750

2000

cd/klm

L 1040cm2

F 4230cm2

5700K

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

4000K

=3%

6/6kV6/6KV

4000K

5700K

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

4000K

Forum LED - 2 modules Narrow beam

LED Wattage (W)

Total power consumption (W)

475 514

735 800

LED Wattage (W)


475 514

735 800

2196 Forum - 2 LED MODULES - narrow beam - “XS”CLD CELL LED (Tj=85°C)

wattage (700mA) colour W K - ølm 700mA - CRI

LED graphite475

72650lm - CRI 7069100lm - CRI 80

LED graphite72650lm - CRI 7065373lm - CRI 90

wattage (1050mA) ølm 1050mA - CRI

LED graphite735

102000lm - CRI 7096865lm - CRI 80

LED graphite 102000lm - CRI 7091655lm - CRI 90

2197 Forum - 2 LED MODULES - narrow beam - “S”CLD CELL LED (Tj=85°C)


LED graphite475

72650lm - CRI 7069100lm - CRI 80



LED graphite735

102000lm - CRI 7096865lm - CRI 80


2195 Forum - 2 LED MODULES - asymmetric - “AS”CLD CELL LED (Tj=85°C)


LED graphite475

72650lm - CRI 7069100lm - CRI 80



LED graphite735

102000lm - CRI 7096865lm - CRI 80


LED Wattage (W)


475 514

735 800

3534

IP66IK08

IP66IK08

140

627

698 303

673

22x35

627 105

±

20°

105

140

627

698 303

673

22x35

627 105

±

20°

105

2191 - M

250

500

750

1000

1250

1500

1750

2000

cd/klm

2192 - W

100

200

300

400

500

600

700

800

900

1000

cd/klm

L 1040cm2

F 4230cm2

L 1040cm2

F 4230cm2

5700K

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

4000K

5700K

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

4000K

5700K

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

4000K

IP66IK08

140

627

698 303

673

22x35

627 105

±

20°

105

IP66IK08

140

627

698 303

673

22x35

627 105

±

20°

105

5700K

CRI90

735W=3%

FLICKER

LOW

475W=6/6kV735W=6/6KV

SURGE

4000K

2190 - MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

L 1040cm2

F 4230cm2

3%

/6kV/6KV

=3%

6/6kV6/6KV

L 1040cm2

F 4230cm2

2193 - XW

50

100

150

200

250

300

350

400

450

500

cd/klm

SymmetricForum LED - 2 modules

2191 Forum - 2 LED MODULES - symmetric - “M”CLD CELL LED (Tj=85°C)


LED graphite475

72650lm - CRI 7069100lm - CRI 80



LED graphite735

102000lm - CRI 7096865lm - CRI 80


2192 Forum - 2 LED MODULES - symmetric - “W”CLD CELL LED (Tj=85°C)


LED graphite475

72650lm - CRI 7069100lm - CRI 80



LED graphite735

102000lm - CRI 7096865lm - CRI 80


LED Wattage (W)


475 514

735 800

LED Wattage (W)


475 514

735 800

Symmetric

2190 Forum - 2 LED MODULES - symmetric - “MS”CLD CELL LED (Tj=85°C)


LED graphite475

72650lm - CRI 7069100lm - CRI 80



LED graphite735

102000lm - CRI 7096865lm - CRI 80


LED Wattage (W)


475 514

735 800

2193 Forum - 2 LED MODULES - symmetric - “XW”CLD CELL LED (Tj=85°C)


LED graphite475

72650lm - CRI 7069100lm - CRI 80



LED graphite735

102000lm - CRI 7096865lm - CRI 80


LED Wattage (W)


475 514

735 800

37

art. 3195 AS

250

500

750

1000

1250

1500

1750

2000

cd/klm

art. 3196

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

art. 3198 S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

art. 3230 MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

art. 3231 M

250

500

750

1000

1250

1500

1750

2000

cd/klm

art. 3192 W

100

200

300

400

500

600

700

800

900

1000

cd/klm

art. 3232

50

100

150

200

250

300

350

400

450

500

cd/klm

3

3 modules - NARROW BEAM


3 modules - ASYMMETRIC BEAM

* Asymmetric tilts from P1 to P8 can be obtained only with the version featuring 2 and 3 modules.

* Asymmetric tilt P0

Version with 3 modules

Version with 3 modules and adjustment range of ±20° with respect

to the horizontal position (0°)


3938

3196 - XS

2500

5000

7500

10000

12500

15000

17500

20000

cd/klm

3198 - S

1000

2000

3000

4000

5000

6000

7000

8000

9000

10000

cd/klm

L 1040cm2

F 4230cm2

L 1040cm2

F 4230cm2

140

753 312

673

±

20°

22x35

140

753 312

673

±

20°

22x35

5700K

5700K

CRI90

CRI90

713W=<3% 1270W=<3%

FLICKER

LOW

713W=<3% 1270W=<3%

FLICKER

LOW

713W=6/6kV 1270W=6/6kV

SURGE

713W=6/6kV 1270W=6/6kV

SURGE

4000K

4000K

3195 - AS

250

500

750

1000

1250

1500

1750

2000

cd/klm

L 1040cm2

F 4230cm2

140

753 303

673

±

20°

22x35

5700K

CRI90

713W=<3% 1270W=<3%

FLICKER

LOW

713W=6/6kV 1270W=6/6kV

SURGE

4000K

<3%<3%

/6kV 6/6kV

IP66IK08EN

EC

IP66IK08EN

EC

IP66IK08EN

EC

LED Wattage (W)


713 778

1270 1386

LED Wattage (W)


713 778

1270 1386

Forum LED - 3 modules Narrow beam

Upon request:

Upon request:

3196 Forum - 3 LED MODULES - narrow beam - “XS”LED (Tj=85°C)





3198 Forum - 3 LED MODULES - narrow beam - “S”LED (Tj=85°C)





Wiring (3 LED modules): separate driver. Is available upon request: 400V power supply for retrofitting exiting systems. Upon request the 3-module Forum version can be equipped with a driver featuring protection level IP20 (to be inserted into the electrical cabinet) or IP66 based on the type of installation (see page 16).

Upon request:

3195 Forum - 3 LED MODULES - asymmetric “AS”LED (Tj=85°C)





LED Wattage (W)


713 778

1270 1386

Asymmetric

4140

140

753 303

673

±

20°

22x35

140

753 303

673

±

20°

22x35

3192 - W

100

200

300

400

500

600

700

800

900

1000

cd/klm

L 1040cm2

F 4230cm2

140

753 303

673

±

20°

22x35

140

753 303

673

±

20°

22x35

3231 - M

250

500

750

1000

1250

1500

1750

2000

cd/klm

L 1040cm2

F 4230cm2

5700K

5700K

CRI90

CRI90

713W=<3% 1270W=<3%

FLICKER

LOW

713W=<3% 1270W=<3%

FLICKER

LOW

713W=6/6kV 1270W=6/6kV

SURGE

713W=6/6kV 1270W=6/6kV

SURGE

4000K

4000K

5700K

CRI90

713W=<3% 1270W=<3%

FLICKER

LOW

713W=6/6kV 1270W=6/6kV

SURGE

4000K

5700K

CRI90

713W=<3% 1270W=<3%

FLICKER

LOW

713W=6/6kV 1270W=6/6kV

SURGE

4000K

<3% =<3%

6/6kV 6/6kV

%

V V

3230 - MS

500

1000

1500

2000

2500

3000

3500

4000

4500

5000

cd/klm

L 1040cm2

F 4230cm2

3232 - XW

50

100

150

200

250

300

350

400

450

500

cd/klm

L 1040cm2

F 4230cm2

IP66IK08EN

EC IP66IK08EN

EC

IP66IK08EN

EC IP66IK08EN

EC

SymmetricForum LED - 3 modules

LED Wattage (W)


713 778

1270 1386

LED Wattage (W)


713 778

1270 1386

Upon request:

3192 Forum - 3 LED MODULES - symmetric - “W”LED (Tj=85°C)





3231 Forum - 3 LED MODULES - symmetric - “M”LED (Tj=85°C)





Upon request:

LED Wattage (W)


713 778

1270 1386

3230 Forum - 3 LED MODULES - symmetric - “MS”LED (Tj=85°C)





Upon request:

LED Wattage (W)


713 778

1270 1386

Upon request:

3232 Forum - 3 LED MODULES - symmetric - “XW”LED (Tj=85°C)





42 43

+20

-20

-38.61 m 38.61 m

-55.68 m

-50.00 m

0.00 m

55.68 m

50.00 m

0.03 m

250

500

750

1000

1250

1500

1750

2000

cd/klm 250

500

750

1000

1250

1500

1750

2000

cd/klm 5°

250

500

750

1000

1250

1500

1750

2000

cd/klm

10°

250

500

750

1000

1250

1500

1750

2000

cd/klm

15°

250

500

750

1000

1250

1500

1750

2000

cd/klm

20°

250

500

750

1000

1250

1500

1750

2000

cd/klm

5°

250

500

750

1000

1250

1500

1750

2000

cd/klm

10°

250

500

750

1000

1250

1500

1750

2000

cd/klm

15°

250

500

750

1000

1250

1500

1750

2000

cd/klm

20°


FlexibilityTechnological progress and optical design evolution have led to the creation of asymmetric spotlights for the lighting of sport facilities, stadiums, infrastructure and all those venues where lighting control is very important to prevent glare and to guarantee high lighting performance. The optical system compromising modules that can be adjusted into 8 positions (with a 5° tilt angle) provides different asymmetric angles for the best lighting solutions without tilting the spotlight.

Field dimensions: Length: 100.00 m Width: 60.00 m

Rotation: 0.0°, 0.0°, 90.0°

Quantity Product (fixture) [lm] [lm] P [W]

8Conventional 2000W discharge

180435 230000 2040.0

8Conventional 2000W discharge

178053 230000 2040.0

Tot.: 2867905 Tot.: 3680000 Tot.: 32640.0

Luminance:

Tipo Em [lx] Emin [lx] Emax [lx] Emin Em Emin Emax Eh m Em H [m] camera

horizontal 212 162 440 0.76 0.37 - 0.00 -

Existing system with LED floodlights:

Eh m Em = Ratio between central, horizontal and vertical luminance, H = measuring height

Existing system with conventional floodlights:

Luminance:

Tipo Em [lx] Emin [lx] Emax [lx] Emin Em Emin Emax Eh m Em H [m] camera

horizontal 234 164 355 0.70 0.46 - 0.00 -

Fixtures:

Fixtures

Eh m Em = Ratio between central, horizontal and vertical luminance, H = measuring height

Quantity Product [lm] P [W]

8 169950 1386.0

8 169950 1386.0

Tot.: 2719200 Tot.: 22176.0

Wiring (3 LED modules): separate driver. Is available upon request: 400V power supply for retrofitting exiting systems. Upon request the 3-module Forum version can be equipped with a driver featuring protection level IP20 (to be inserted into the electrical cabinet) or IP66 based on the type of installation (see page 16).

: P0 - Tilt 50°

: P3 - Tilt 65°

: P6 - Tilt 40°

: P1 - Tilt 55°

: P4 - Tilt 70°

: P7 - Tilt 35°

: P2 - Tilt 60°

: P5 - Tilt 45°

: P8 - Tilt 30°

Asymmetric tilts from P1 to P8 can be obtained only with the version featuring 2 and 3 modules

M A D E I N I T A L Y

REV 4 - ENGSome images are simulated application and / or photomontages

Numbers in some images are written in European format where decimals are separated by commas rather than dots (i.e. 50,000 will display as 50.000).

www.disano.it

Documents

Forum LED - disano.it LED_3_ING.pdf · 2 3 FLICKER LOW SURGE p. 4 p. 8 p. 16 p. 18 p. 24 p. 26 p. 28-29 p. 32 p. 33 p. 34-35 p. 38 p. 39 p. 40-41 p. 14 p. 6 p. 12 p. 10 Forum LED