CABLE SOLUTIONSFOR THE WATER TREATMENT INDUSTRY

Dekoron ire Cable’s construc on capabili es are highlighted below, with an emphasis given to our more common construc ons and o erings. Dekoron prides ourselves on our ability to produce custom and unique cables to suit our customer’s needs. If your project requires a speciali ed cable construc on, contact us today to learn more about our specialty cable op ons.

CONDUCTORS are, nned, or nickel-plated annealed copper and most

thermocouple alloys, in solid, 7-strand, or 19-strand con gura ons from to are common in Dekoron’s products. ddi onal si es, metric conductors, and alterna ve stranding op ons are available upon request.

INSULATIONSDekoron o ers both thermoset and thermoplas c insula on compounds including PVC, PVC/Nylon, XLPE, HDPE, and Silicone. Specialty compounds are available upon request.

JACKETSackets, some mes known as sheaths, are provided in similar

compounds as the insula on. hese compounds include PVC, CPE, PN LS H), HDPE, Nylon, and Polyurethane, some of which are available in low-temperature capable versions. Specialty compounds may also be available upon request.

CONFIGURATIONSDekoron’s typical cable construc ons feature single and mul ple twisted pairs and triads, as well as mul -conductor con gura ons. hese cables are available with individual, overall, and unshielded op ons. Special construc ons, like twisted quads and composite cable construc ons are also available.

SHIELDING Dekoron, the innovator of EMI shielding, provides a variety of op ons in shielding to prevent noise and interference and helps to maintain signal quality. ypical shields are an aluminum tape with polyester backing. Drain wires are combined with the shield and are in contact with the conduc ve side of the tape, allowing for easy termina on and grounding. ddi onal shielding materials, such as copper, are also available. Braided shields are available by special request.

INSTRUMENTATION Instrumenta on cables monitor process parameters such as pressure, ow rate, and temperature by transmi ng high-quality, low voltage signals to the instrumenta on and process control room. hese cables are typically mul ple twisted-pair con gura ons in 16 or 1 si es, with each pair gathering one set of data. Shielding, a Dekoron innova on, prevents noise and interference and helps to maintains signal quality.

CONTROL Control cables carry signals to change process parameters from the control room to the remote equipment. Control cables are typically comprised of 1 and larger conductors, some mes with addi onal grounding conductors and shielding.

CIRCUIT INTEGRITY Circuit Integrity cables are meant to perform in the event of a re emergency. hese specialty cables are typically installed in cri cal circuits, allowing for extended control and monitoring mes, even in an emergency situa on.

DIGITAL DATADigital Data cables, such as ieldbus and Category cables, are serial, two-way, digital communica on cables speci cally designed for process monitoring. Communica on is provided via twisted-pairs of conductors with speci c electrical characteris cs and construc on features depending upon the cer ca on.

THERMOCOUPLE EXTENSIONhermocouple Extension cables allow for the remote

monitoring of thermocouples from a central loca on. hese cables are available in several common thermocouple types.

COMPOSITE CABLES Composite cables combine the above types into one convenient package, providing for an all-in-one solu on.

hese cables are especially helpful when space or ease of installa on is a concern.

ARMORDekoron o ers several armor op ons to provide addi onal protec on for various applica ons. hese armors have various bene ts, and are ideally suited for various applica ons.

DEKABONTM

Dekoron’s innova ve Dekabon M chemical and moisure barrier provides a gas and liquid- ght metallic seal around a cable, making it ideal for use in-ground and near gasses and liquids.

DEKAFLEX®

Dekoron’s latest innova on, Deka lex , is a con nuously-corrugated, welded stainless steel armor. In addi on to its herme c seal, it o ers superior strength, crush and impact res stance, fa gue resistance, corrosion resistance, and incredible exibility. Deka lex is the new standard in armored cables, o ering a truly superior op on.

GARDEX®

his con nuously-corrugated, welded aluminum armor is the most common method used to provide addi onal protec on to cables used in ha ardous loca ons. It o ers great strength and a hermi c seal, elimina ng the need for conduit.SERVED WIRE ARMOR (SWA)

Consis ng of numerous strands of galvani ed steel wire which are wrapped served) around the cable, S provides a great, low-cost method to greatly increase the cable’s cut-through resistance without sacri cing exibility.INTERLOCKED ARMOR (ILA)

vailable in both galvani ed steel and aluminum, IL o ers cut-through resistance and also provides addi onal mechanical protec on without sacri cing exibility.DUAL ARMOR

hen mul ple layers of protec on are required, Dekoron can help. Most armor types, such as S and Dekabon M, can be combined to provide even greater protec on, even in the most demanding situa ons.

APPROVALS & RATINGDekoron manufactures cables to various construc on standards and voltage ra ngs. Dekoron o ers products that can comply with domes c and interna onal standards, as well as various material and cable test standards.DESIGN STANDARDS

Most Dekoron products are manufactured to Underwriter’s Laboratories UL) standards such as UL 1 PL C), UL I C), UL 1 77 C), UL 1 69 MC), and UL -HL). ther common standards used for Dekoron products include ICE S-7 - , BS , BS EN -7, IEC 6 , and S/N S .CONDUCTORS

Dekoron’s conductors are cer ed to S M B , B , B , when applicable. Compliance with IEC 6 and S/N S 11 is also available.TEMPERATURE RATINGS

Dekoron o ers most products with temperature ra ngs from - C to 1 C, depending upon the cable’s construc on.FLAME RETARDANCY

Most of Dekoron’s products have been cer ed to meet one or more of the following test standards UL 16 , IEEE 1 , V -1, , and/or IEC 6 .FIRE RESISTANCE

Circuit Integrity Cables are available in several con gura ons which comply with IEC 6 1. ddi onal ire esistance compliance may be available upon special request.WATER, OIL, & CHEMICAL RESISTANCE

Dekoron’s products meet the standard UL requirements for water, oil, and chemical resistance. esistance to a speci c material varies by compound and construc on. Compliance to addi onal test standards may also be available.SUNLIGHT (ULTRAVIOLET) RESISTANCE

Dekoron’s products comply with the UL requirements for ultraviolet exposure and are marked as Sunlight esistant. Compliance to addi onal test standards may also be available.IN-GROUND USE

Most of Dekoron’s products are suitable for in-ground use. pplicable UL products are marked as Direct Burial cables.

SPECIALTY RATINGSER (EXPOSED RUN)

hese cables provide addi onal impact and crush resistance, allowing the cable to be run outside of a cable tray or conduit. E ra ngs are available for many construc ons.HL (HAZARDOUS LOCATIONS)

Dekoron o ers many cables which are suitable for use in Class I,Division 1 Class I, one ) ha ardous loca ons. hese cables meet very stringent construc on and performance standards, ensuring safe opera on in the most dangerous environments.

FIELDBUS

ieldbus cables can be cer ed to meet ieldComm - H1 and/or IEC 611 standards.

REGIONAL SALES CONTACTSGULF COAST REGION (Based in Houston, TX)Russell Islamrussell.islam@dekoroncable.com(281) 298-3083

MIDWEST & NORTHEAST REGION(Based in incinna , H)Kevin Doughertykevin.dougherty@dekoroncable.com(513) 553-1242

WESTERN REGION, ALASKA, & CANADA(Based in Petaluma, CA)

o o arsco .goddard@dekoroncable.com(707) 762-6672

CUSTOMER SERVICE(903) 572-0657 – (903) 572-6153 (Fax)

PRODUCTION FACILITY1300 Industrial Road, Mount Pleasant, TX 75455(903) 572-3475 – www.dekoroncable.com

DOCUMENTATION & PACKAGING

If requested prior to ordering, Dekoron can pro ide er cates est eports er cates of Conformance) for every item on an order shipment.

Custom reel tags can be printed to meet customer requirements if they are requested prior to placing an order.

nless other ise speci ed, cables are delivered on wooden reels from 16 up to 96 inches in diameter. n most reels, there is an op on to add lagging wooden planks nailed to the reels anges) to prevent damage to the cable while in

transit. Dekoron’s wooden reels are heat-treated and comply with interna onal phytosanitary requirements.

Cable ends known as pig tails are le exposed on the outside of the reel to allow for nal tes ng. hey are sealed with heat-shrink

caps during shipment.

AUG 2015

CHEMICAL RESISTANCE GUIDEJACKET MATERIAL

CHEMICAL CPE HDPE LDPE TPN TPU PVC

Ac vated Carbon A A A A A AAlum A — A B B AAmmonia — A A A C BBromine C C B C C CCalcium Hydroxide A A A A C AChlorine — A B C C CFerric (Iron) Chloride A A A A — AFerric (Iron) Sulfate A — A A A AHydrochloric Acid A A A B C AHydrogen Peroxide A A A C A A

one A B B A B APhosphorus — — B B — BPotassium Permanganate — A A B C ASodium Chloride A A A A A BSodium Hydroxide A B A A C ASodium Hydrosul de — — — A B —Sodium Hypochlorite A A B B C ASulfur Dioxide — — B B C ASulfuric Acid A A A A C B

A Resistant Chemical should have no ma or e ect on material.B Somewhat Resistant Chemical may have minor e ect on material.C Not Resistant Chemical likely to have an e ect on material.— Not Rated No data available.