8

 · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions

  • Upload
    others

  • View
    0

  • Download
    0

Embed Size (px)

Citation preview

Page 1:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 2:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 3:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 4:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 5:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 6:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 7:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions
Page 8:  · for 2-3 hours at 60-80QC may be required to avoid silver streaks or surface defects due to hygroscopic nature of Masterbatch or any other additives. Typical Processing Conditions