Upload
phamdieu
View
287
Download
0
Embed Size (px)
Citation preview
Designed without compromise
The Flygt 2600 series from ITT Water & Wastewater represents a major breakthrough in dewatering pump technology. Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance, consistent performance over time, and ease of service. The result is lower overall cost of ownership.
The Flygt 2620 is convenient to maneuver and features an ergonomic rubber handle. Its patented Dura-Spin™ hydraulic system and newly designed Hard-Iron™ impeller significantly improve wear resistance and sustain performance over time. It’s easy to adjust the impeller for optimum performance, with just one adjustment screw.
Cutting-edge design with fewer components makes this pump simple and quick to maintain. A removable top gives effortless access to the junction box, and external oil and inspection plugs facilitate maintenance. The inspection chamber improves protection and extends service intervals. The unique one-piece Plug-In™ seal provides superior protection and is easy to replace.
This advanced technology is backed by ITT Water & Watewater outstanding support and worldwide presence. Operating in over 140 countries, we bring many years of experience to bear in order to keep your business moving.
Flygt 2620 dewatering pump
60Hz
H [ft] / [m]
0 2 4 6 8 10 12 14 16 18
Q [l/s] /[usgpm]0 50 100 150 200 250 300
0
5
10
15
20
25
0
10
20
30
40
50
60
70
80
90
B 228 MT
K 233 MT
K 235 MT
Removable top– Easy to access electrical components
2620.171Submersible pump for dewatering of con- struction sites, mines, draining of flooded areas and other similar applications where the liquid may contain abrasive particles.
DenominationProduct code 2620.171Installation PortableImpeller characteristics Wear resistant, medium head (B 228, MT)
Clog resistant option, medium head (K 233, 235, MT)
Discharge connection 3”
Process dataLiquid temperature max +104°F / +40°CDepth of immersion max 65.62 ft / 20 mLiquid density max 1100 kg/m³Strainer hole size 0.03” x 0.06” / 7 mm x 16 mm The pH of the pumped liquid pH 5-8
Motor dataSquirrel cage 1-phase and 3-phase induction motorFrequency 60HzInsulation class F (+311°F / +155°C)Voltage variation– continuous running max ± 5%– intermittent running max ± 10%Voltage imbalance between phases max 2%No. of starts/hour max 30
CablesSUBCAB® Submersible cable SUBCAB® Screened Heavy-duty rubber submersible cable
Monitoring equipmentThermal contacts opening temperature +257°F / +125°C
MaterialsOuter casing Aluminum alloy Impeller Hard-Iron™ Wear parts Nitrile rubber, Hard-Iron™Stator housing AluminumStrainer Stainless steelShaft Stainless steelO-rings Nitrile rubberDischarge connection Aluminum
Mechanical face sealsInner Tungsten carbide/CeramicOuter Tungsten carbide
WeightTotal (excl. cable) Wear resistant: 66.1 Ibs / 30 kg Total (excl. cable) Clog-resistant (option): 61.7 Ibs / 28 kg
OptionsWarm liquid version max 158°F / +70°CQuick couplings 3”StartersZinc anodesClog resistant impellerLow suction collarAccessoriesAdapters, hose connections and other mechanical accessories. Electrical accessories such as pump controller, control panels and monitoring relays.
Rating (clog and wear resistant)1~, 3~Rated output 1~ 2.4 hp / 1.8 kW 3~ 3.5 hp / 2.6 kW Speed of rotation 1~ 3420 rpm 3~ 3410 rpm
Rated Starting ~ Voltage current current V A A
1~ 220 10 35 1~ 230 9.9 37 1~ 240 9.8 39 3~ 220 D 9.6 65 3~ 230 Y 9.5 65 3~ 380 Y 5.6 37 3~ 460 Y 4.7 32 3~ 480 Y 4.9 34 3~ 575 Y 3.6 23 3~ 600 Y 3.6 24
2620.171
DimensionsHeight 24.3” / 617 mm Diameter 9.5” / 240 mm
Performance
Inspection chamber– Improved protection
Corrosion and impact resistant strainer
Single adjustment screw – Easy to adjust for optimum performance
Specially designed Hard-Iron™ impeller – Highly efficient and wear resistant (optional clog-resistant impeller available)
Dura-Spin™ – Minimizes impeller wear
External oil and inspection plugs – Easy to inspect and service
Plug-In™ seal– Easy to service,double protection
Spin-Out™– Minimizes clogging and seal wear
Rubber shock absorbers – Impact resistant
60Hz
Built-in capacitors– Easy to handle
B = wear resistant impellerK = clog resistant impeller (option)
Dat
a sh
eet
2620
60H
z.04
.Am
.05.
09
896
316
Tr
osa
Tryc
keri
AB
6953
1
Convenient handleAluminium discharge connection
www.ittwww.com
Designed without compromise
The new 2600 series from Flygt represents a major breakthrough in dewatering pump technology. Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance, consistent performance over time, and ease of service. The result is lower overall cost of ownership.
When you need a portable pump with extra performance, the 2630 fits the bill. Its patented Dura-Spin™ hydraulic system and newly designed high-chrome cast iron impeller significantly improve wear resistance and sustain performance over time. It’s easy to adjust the impeller for optimum performance, with just one adjustment screw.
Cutting-edge design with fewer components makes this pump simple and quick to maintain. A removable top gives effortless access to the junction box, and external oil and inspection plugs facilitate maintenance. The inspection chamber improves protection and extends service intervals. The unique one-piece Plug-In™ seal provides superior protection and is easy to replace.
This advanced technology is backed by Flygt’s outstanding support and worldwide presence. Operating in over 130 countries, we bring many years of experience to bear in order to keep your business moving.
2630 dewatering pump
60Hz
2630.180Submersible pump for dewatering of construction sites, mines, draining of flooded areas and other similar applications where the liquid may contain abrasive particles.
DenominationProduct code 2630.180Installation PortableImpeller characteristics Wear resistant, medium head (B 228, MT)
Wear resistant, high head (B 253, HT)Optional clog resistant (K 236, MT)
Discharge connection 4”, 3”
Process dataLiquid temperature max +104°F / +40°CDepth of immersion max 65.62 ft / 20 mLiquid density max 1100 kg/m³Strainer hole size 0.31” x 0.71” / 8 mm x 18 mmThe pH of the pumped liquid pH 5-8
Motor dataSquirrel cage 3-phase induction motorFrequency 60HzInsulation class H (+356°F / +180°C)Voltage variation– continuous running max ± 5%– intermittent running max ± 10%Voltage imbalance between phases max 2%No. of starts/hour max 30
CablesSUBCAB® Submersible cableNSSHÖU Heavy-duty rubber
submersible cable
Monitoring equipmentThermal contacts opening temperature +289°F / +140°C
MaterialsOuter casing Stainless steelImpeller High-chrome alloyed white cast ironWear parts Nitrile rubberStator housing AluminumStrainer Stainless steelShaft Stainless steelO-rings Nitrile rubber
Mechanical face sealsInner Tungsten carbideOuter Tungsten carbide
WeightTotal (excl. cable) 108 lbs / 49 kg
OptionsWarm liquid version max 158°F / +70°CQuick couplings 4”, 3”StartersZinc anodesClog-resistant impeller
AccessoriesAdapters, hose connections and other mechanical accessories. Electrical accessories such as pump controller, control panels and monitoring relays.
Rating3~Rated output 5.9 hp / 4.4 kWSpeed of rotation 3490 rpm
Rated Starting Voltage current current V A A
200 D 16 129 208 D 15 135 220 D 14 106 220 Y 14 105 230 D 14 111 230 Y 14 110 240 D 13 116 240 Y 13 115 380 D 8.2 64 400 D 7.9 68 440 D 7.1 50 440 Y 7.1 52 460 D 6.8 53 460 Y 6.8 55 480 D 6.5 55 480 Y 6.6 58 575 D 5.4 44 600 D 5.3 46
H [m] / [ft]
0 5 10 15 20 25 30 35
Q [l/s] /[usgpm]0 100 200 300 400 500 600
0
5
10
15
20
25
30
35
40
0
20
40
60
80
100
120
140
B 253HT
B 228MT
K 236MT
2630.180
DimensionsHeight 29.9” / 759 mmDiameter 11.3” / 286 mm
Performance
Specially designed high-chrome impeller – Highly efficient and wear resistant (optional clog-resistant impeller)
Dura-Spin™ – Minimizes impeller wear
Inspection chamber– Improved protection
Stainless steel cooling jacket and strainer – Corrosion andimpact resistant
Single trimming screw – Easy to adjust for optimum performance
Convenient handle
Removable top – Easy to access electrical components
Plug-In™ seal– Easy to service,double protection
Spin-Out™– Minimizes clogging and seal wear
External oil and inspection plugs – Easy to inspect and service
Rubber shock absorbers – Impact resistant
60Hz
HT= High headMT= Medium headB = Wear resistant impellerK = Clog resistant impeller (option)
Dat
a sh
eet
2630
60H
z.A
m.0
9.06
8
9631
4
Tro
sa T
ryck
eri A
B 56
569
www.flygt.comwww.flygtus.com www.ittflygt.ca
Designed without compromise
The new 2600 series from Flygt represents a major breakthrough in dewatering pump technology. Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance, consistent performance over time, and ease of service. The result is lower overall cost of ownership.
When you need a portable pump with extra performance, the 2640 fits the bill. Its patented Dura-Spin™ hydraulic system and newly designed high-chrome cast iron impeller significantly improve wear resistance and sustain performance over time. It’s easy to adjust the impeller for optimum performance, with just one adjustment screw.
Cutting-edge design with fewer components makes this pump simple and quick to maintain. A removable top gives effortless access to the junction box, and external oil and inspection plugs facilitate maintenance. The inspection chamber improves protection and extends service intervals. The unique one-piece Plug-In™ seal provides superior protection and is easy to replace.
This advanced technology is backed by Flygt’s outstanding support and worldwide presence. Operating in over 130 countries, we bring many years of experience to bear in order to keep your business moving.
2640 dewatering pump
60Hz
2640.180Submersible pump for dewatering of construction sites, mines, draining of flooded areas and other similar applications where the liquid may contain abrasive particles.
DenominationProduct code 2640.180Installation PortableImpeller characteristics Wear resistant, medium head (B 228, MT)
Wear resistant, high head (B 253, HT)Optional clog resistant (K 236, MT)
Discharge connection 4”, 3”
Process dataLiquid temperature max +104°F / +40°CDepth of immersion max 65.62 ft / 20 mLiquid density max 1100 kg/m³Strainer hole size 0.31” x 0.71” / 8 mm x 18 mmThe pH of the pumped liquid pH 5-8
Motor dataSquirrel cage 3-phase induction motorFrequency 60HzInsulation class H (+356°F / +180°C)Voltage variation– continuous running max ± 5%– intermittent running max ± 10%Voltage imbalance between phases max 2%No. of starts/hour max 30
CablesSUBCAB® Submersible cableNSSHÖU Heavy-duty rubber
submersible cable
Monitoring equipmentThermal contacts opening temperature +289°F / +140°C
MaterialsOuter casing Stainless steelImpeller High-chrome alloyed white cast ironWear parts Nitrile rubberStator housing AluminumStrainer Stainless steelShaft Stainless steelO-rings Nitrile rubber
Mechanical face sealsInner Tungsten carbideOuter Tungsten carbide
WeightTotal (excl. cable) 112 lbs / 51 kg
OptionsWarm liquid version max +156°F / +70°CQuick couplings 4”, 3”StartersZinc anodesClog-resistant impeller
AccessoriesAdapters, hose connections and other mechanical accessories. Electrical accessories such as pump controller, control panels and monitoring relays.
Rating3~Rated output 8.85 hp / 6.6 kWSpeed of rotation 3490 rpm
Rated Starting Voltage current current V A A
200 D 24 185 208 D 24 194 220 D 22 159 220 Y 22 158 230 D 21 167 230 Y 22 166 240 D 21 175 240 Y 22 174 380 D 13 101 400 D 13 107 440 D 11 80 440 Y 11 79 460 D 11 84 460 Y 11 83 480 D 11 88 480 Y 11 87 575 D 8.5 64 600 D 8.4 67
H [m] / [ft]
0 5 10 15 20 25 30 35 40 45
Q [l/s] /[usgpm]0 100 200 300 400 500 600 700
0
10
20
30
40
50
0
20
40
60
80
100
120
140
160
180
B 228MT
B 253HT
K 236MT
2640.180
DimensionsHeight 29.9” / 759 mmDiameter 11.3” / 286 mm
Performance
60Hz
Specially designed high-chrome impeller – Highly efficient and wear resistant (optional clog-resistant impeller)
Dura-Spin™ – Minimizes impeller wear
Inspection chamber– Improved protection
Stainless steel cooling jacket and strainer – Corrosion andimpact resistant
Single adjustment screw – Easy to adjust for optimum performance
Convenient handle
Removable top – Easy to access electrical components
Plug-In™ seal– Easy to service,double protection
Spin-Out™– Minimizes clogging and seal wear
External oil and inspection plugs – Easy to inspect and service
Rubber shock absorbers – Impact resistant
HT= High headMT= Medium headB = Wear resistant impellerK = Clog resistant impeller (option)
Dat
a sh
eet
2640
60H
z.A
m.0
9.06
8
9631
3
Tro
sa T
ryck
eri A
B 56
569
www.flygt.comwww.flygtus.com www.ittflygt.ca
Designed without compromise
The new 2600 series from Flygt represents a major breakthrough in dewatering pump technology. Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance, consistent performance over time, and ease of service. The result is lower overall cost of ownership.
When you need a portable pump with extra performance, the 2660 fits the bill. Its patented Dura-Spin™ hydraulic system and newly designed high-chrome cast iron impeller significantly improve wear resistance and sustain performance over time. It’s easy to adjust the impeller for optimum performance, with just one adjustment screw.
Cutting-edge design with fewer components makes this pump simple and quick to maintain. A removable top cover gives effortless access to the junction box, and external oil and inspection plugs facilitate maintenance. The inspection chamber improves protection and extends service intervals. The unique one-piece Plug-In™ seal provides superior protection and is easy to replace.
This advanced technology is backed by Flygt’s outstanding support and worldwide presence. Operating in over 130 countries, we bring many years of experience to bear in order to keep your business moving.
2660 dewatering pump
60Hz
H [m] / [ft]
0 10 20 30 40 50 60 70
Q [l/s] /[usgpm]0 200 400 600 800 1000 1200
0
10
20
30
40
50
60
0
40
80
120
160
200
B 253HT
K 236MT
B 228MT
2660.180Submersible pump for dewatering of construction sites, mines, draining of flooded areas and other similar applications where the liquid may contain abrasive particles.
DenominationProduct code 2660.180Installation PortableImpeller characteristics Wear resistant, medium head (B 228, MT)
Wear resistant, high head (B 253, HT)Optional clog resistant (K 236, MT))
Discharge connection 6”, 4”
Process dataLiquid temperature max +104°F / +40°CDepth of immersion max 65.62 ft / 20 mLiquid density max 1100 kg/m³Strainer hole size 0.35” x 0.71” / 9 mm x 18 mmThe pH of the pumped liquid pH 5–8
Motor dataSquirrel cage 3-phase induction motorFrequency 60HzInsulation class H (+356°F / +180°C)Voltage variation– continuous running max ± 5%– intermittent running max ± 10%Voltage imbalance between phases max 2%No. of starts/hour max 30
CablesSUBCAB® Submersible cableNSSHÖU Heavy-duty rubber
submersible cable
Monitoring equipmentThermal contacts opening temperature +289°F / +140°C
MaterialsOuter casing Stainless steelImpeller High-chrome alloyed white cast ironWear parts Nitrile rubberStator housing AluminumStrainer Stainless steelShaft Stainless steelO-rings Nitrile rubber
Mechanical face sealsInner Tungsten carbideOuter Tungsten carbide
WeightTotal (excl. cable) 172 lbs / 78 kg
OptionsWarm liquid version max +158°F / +70°CQuick couplings 6”, 4”StartersZinc anodesClog-resistant impeller
AccessoriesAdapters, hose connections and other mechanical accessories. Electrical accessories such as pump controller, control panels and monitoring relays.
Rating3~Rated output 15 hp / 11.2 kWSpeed of rotation 3465 rpm
Rated Starting Voltage current current V A A
220 D 37 222 230 Y 35 224 380 D 21 128 460 Y 18 112 480 Y 17 117 575 D 14 96 600 D 14 101
2660.180
DimensionsHeight 33.58” / 853 mmDiameter 13.62” / 346 mm
Performance
Dura-Spin™ – Minimizes impeller wear
Inspection chamber– Improved protection
Stainless steel cooling jacket and strainer – Corrosion andimpact resistant
Single adjustment screw – Easy to adjust for optimum performance
Specially designed high-chrome impeller – Highly efficient and wear resistant(optional clog-resistant impeller)
Convenient handle
Removable junction box cover– Easy to access electrical components
Plug-In™ seal– Easy to service,double protection
External oil and inspection plugs – Easy to inspect
Spin-Out™– Minimizes clogging and seal wear
Rubber shock absorbers – Impact resistant
60Hz
HT= High headMT= Medium headB = Wear resistant impellerK = Clog resistant impeller (option)
Dat
a sh
eet
2660
60H
z.A
m.0
9.06
8
9631
2
Tro
sa T
ryck
eri A
B 56
569
www.flygt.comwww.flygtus.com www.ittflygt.ca
Designed without compromise
The new 2600 series from Flygt represents a major breakthrough in dewatering pump technology. Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance, consistent performance over time, and ease of service. The result is lower overall cost of ownership.
The largest pump in the range, the 2670 has the power to take on the toughest challenges. Its patented Dura-Spin™ hydraulic system and newly designed high-chrome cast iron impeller significantly improve wear resistance and sustain performance over time. It’s easy to adjust the impeller for optimum performance, with just one adjustment screw.
Cutting-edge design with fewer components makes this pump simple and quick to maintain. A removable top cover gives effortless access to the junction box, and external oil and inspection plugs facilitate maintenance. The inspection chamber improves protection and extends service intervals. The unique one-piece Plug-In™ seal provides superior protection and is easy to replace.
This advanced technology is backed by Flygt’s outstanding support and worldwide presence. Operating in over 130 countries, we bring many years of experience to bear in order to keep your business moving.
2670 dewatering pump
60Hz
2670.180Submersible pump for dewatering of construction sites, mines, draining of flooded areas and other similar applications where the liquid may contain abrasive particles.
DenominationProduct code 2670.180Installation PortableImpeller characteristics Wear resistant Medium head (B 228, MT) High head (B 253, HT)Discharge connection 6”, 4”
Process dataLiquid temperature max 104°F / +40°CDepth of immersion max 65.62 ft / 20 mLiquid density max 1100 kg/m³Strainer hole size 0.79” x 0.39” / 20 mm x 10 mmThe pH of the pumped liquid pH 5-8
Motor dataSquirrel cage 3-phase induction motorFrequency 60HzInsulation class H (356°F / +180°C)Voltage variation– continuous running max ± 5%– intermittent running max ± 10%Voltage imbalance between phases max 2%No. of starts/hour max 30
CablesSUBCAB® Submersible cableNSSHÖU Heavy-duty rubber submersible cable
Monitoring equipmentThermal contacts opening temperature 284°F / +140°C
MaterialsOuter casing Stainless steelImpeller High-chrome alloyed white cast ironWear parts Nitrile rubberStator housing Cast ironStrainer Stainless steelShaft Stainless steelO-rings Nitrile rubber
Mechanical face sealsInner Tungsten carbideOuter Tungsten carbide
WeightTotal (excl. cable) 308 lbs / 140 kg
OptionsWarm liquid version max 158°F / +70°CQuick couplings 6”, 4”StartersZinc anodes
AccessoriesAdapters, hose connections and other mechanical accessories. Electrical accessories such as pump controller, control panels and monitoring relays.
Rating3~Rated output 27 hp / 20 kWSpeed of rotation 3490 rpm
Rated Starting Voltage current current V A A
220 Y 63 395 230 Y 61 415 440 Y 32 197 440 D 32 243 460 Y 31 207 460 D 31 215 575 D 25 189 600 D 25 198
2670.180
H [m] / [ft]
0 10 20 30 40 50 60 70 80 90
Q [l/s] /[usgpm]0 200 400 600 800 1000 1200 1400
0
10
20
30
40
50
60
70
0
50
100
150
200
250
B 253HT
B 228MT
DimensionsHeight 37.6” / 955 mmDiameter 15.6” / 395 mm
Performance
External oil and inspection plugs – Easy to inspect and service
Inspection chamber– Improved protection
Stainless steel cooling jacket and strainer – Corrosion andimpact resistant
Single trimming screw – Easy to adjust for optimum performance
Specially designed high-chrome impeller – Highly efficient and wear resistant
Convenient handle
Removable junction box cover– Easy to access electrical components
Plug-In™ seal– Easy to service,double protection
Spin-Out™– Minimizes clogging and seal wear
Dura-Spin™ – Minimizes impeller wear
Rubber shock absorbers – Impact resistant
60Hz
www.flygt.comwww.flygtus.com www.ittflygt.ca
HT= High headMT= Medium headB = Wear resistant impeller
Dat
a sh
eet
2670
60H
z.A
m.0
8.06
8
8963
16
Tro
sa T
ryck
eri A
B 56
569
Designed without compromise
The Flygt 2600 series from ITT Water & Wastewater represents a major breakthrough in dewatering pump technology. Radically engineered from the ground up, these robust pumps deliver unmatched wear resistance, consistent performance over time, and ease of service. The result is lower overall cost of ownership.
The smallest pump in the range, the Flygt 2610 delivers impressive performance for smaller-scale applications. Its open impeller design minimizes clogging, giving sustained performance over time. It’s easy to adjust the impeller for optimum performance, with just one adjustment screw.
Cutting-edge design with fewer components makes this pump simple and quick to maintain. A removable top gives effortless access to the junction box, and external oil and inspection plugs facilitate maintenance. The inspection chamber improves protection and extends service intervals. The unique one-piece Plug-In™ seal provides superior protection and is easy to replace.
This advanced technology is backed by ITT Water & Wastewater´s outstanding support and worldwide presence. Operating in over 140 countries, we bring many years of experience to bear in order to keep your business moving.
Flygt 2610 dewatering pump
60Hz
Rubber shock absorbers – Impact resistant
2610.171
Performance
Inspection chamber– Improved protection
Corrosion and impact resistant strainer
Single adjustment screw – Easy to adjust for optimum performance
Specially designed Hard-Iron™ clog- resistant impeller– High efficiency sustained over time
External oil and inspection plugs – Easy to inspect and service
Convenient handle
Removable top– Easy to access electrical components
Plug-In™ seal– Easy to service,double protection
Spin-Out™– Minimizes clogging and seal wear
60Hz
H [ft] / [m]
0 2 4 6 8 10
Q [l/s] /[usgpm]0 20 40 60 80 100 120 140 160 180
0
2
4
6
8
10
12
14
16
18
0
10
20
30
40
50
60
K 235 MT1 ~ K 239 MT
1 ~
K 233 MT3 ~
K=Clog resistant impeller
Dat
a sh
eet
2610
60H
z.05
.Am
.05.
09
896
315
Tr
osa
Tryc
keri
AB
695
30
www.ittwww.com
Built-in capacitors– Easy to handle
2610.171Submersible pump for dewatering of con-struction sites, mines, draining of flooded areas and other similar applications where the liquid may contain abrasive particles.
DenominationProduct code 2610.171Installation PortableImpeller characteristics
Medium head (MT) Clog resistant (K)Discharge connection 2”
Process dataLiquid temperature max +104°F / +40°C Depth of immersion max 65.62 ft / 20 m Liquid density max 1100 kg/m³Strainer hole size 0.24” x 0.53” / 6 mm x 13.5 mmThe pH of the pumped liquid pH 5–8
Motor dataSquirrel cage 1-phase and 3-phase induction motorFrequency 60HzInsulation class F (+311°F / +155°C)Voltage variation– continuous running max ± 5%– intermittent running max ± 10%Voltage imbalance between phases max 2%No. of starts/hour max 30
CablesSUBCAB® Submersible cable SUBCAB® Screened Heavy duty rubber
submersible cable
Monitoring equipmentThermal contacts opening temperature +257°F / +125°C
MaterialsOuter casing Aluminum alloyImpeller Hard-Iron™ white cast ironWear parts Nitrile rubberStator housing Aluminum alloyStrainer Stainless steelShaft Stainless steelO-rings Nitrile rubberDischarge connection Aluminum
Mechanical face sealsInner Tungsten carbide/CeramicOuter Tungsten carbide
WeightTotal (excl. cable) 1~ 1.3 hp 42 lbs / 19 kg1~ 1.8 hp 49 lbs / 22 kg3~ 1.9 hp 42 lbs / 19 kg
DimensionsHeight 23.4” / 594 mm Diameter 7.7” / 195 mm
OptionsWarm liquid version max 158°F / +70°CQuick couplings 2”StartersZinc anodesLow suction collarAccessoriesAdapters, hose connections and other mechanical accessories. Electrical accessories such as pump controller, control panels and monitoring relays.
Rating1~, 3~Rated output 1~ 1.3 hp / 1.0 kW 1~ 1.8 hp / 1.3 kW 3~ 1.9 hp / 1.4 kWSpeed of rotation 1~ 1,3 hp 3410 rpm 1~ 1.8 hp 3475 rpm
3~ 1,9 hp 3335 rpm Rated Starting ~ Voltage current current V A A
1~1,3 115 12 49 1~1.3 220 6.0 23 1~1,3 230 5.8 24 1~1.3 240 5.7 26 1~1.8 115 15 74 1~1.8 220 7.5 35 1~1.8 230 7.4 37 1~1.8 240 7.5 39 3~1.9 220 D 5.4 29 3~ 1.9 230 Y 5.2 27 3~ 1.9 380 Y 3.1 17 3~ 1.9 460 Y 2.6 14 3~ 1.9 480 Y 2.6 14 3~ 1.9 575 Y 2.0 10 3~ 1.9 600 2.0 10
Aluminium discharge connection