Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
www.trumbull-mfg.com
Trumbull Manufacturing, Inc.3850 Hendricks Road, Youngstown, Ohio 44515
Phone:330.270.7888
Toll Free:877.504.1507
Fax:330.392.0756
i
i
Size DomesticNon-
Domesic DomesticNon-
Domestic
4” 1367-1558 367-1558 1367-1540 367-1540
6” 1367-1559 367-1559 1367-1544 367-1544
Ductile Iron** 316 Stainless Steel
Unique square design
of QuadroSeal™ Gasket
surrounds casting on four
sides to prevent separation.
QuadroSeal™ design also
prevents metal-to-metal
contact that can cause
seating surfaces of iron
valves to corrode into a
“frozen shut” position.
See page G-39 for more
information.
Floor-Type valves are cast in 4” and 6” sizes, in overall
lengths of approx. 7-3/4”. The lengths can be extended by
inserting C900 PVC pipe into the underside of the valve.
The PVC extensions can be furnished and inserted by
Trumbull, to customer’s exact length requirements, or in
the fi eld with customer supplied PVC pipe.
C900 PVC PIPE
* For product weights, see drawing on Page G-36. ** Furnished with NSF-61, 2 part epoxy coating.
Trumbull Floor-Type Tank Pressure Relief Valves are cast in the bottom of tanks in treatment plants to keep empty tanks from fl oating from an excess of groundwater beneath them. When this condition occurs, the hydrostatic pressure will open the cover of the valve allowing water to enter, thereby equalizing pressure inside and outside the tank and preventing it from fl oating. They will start to open at less than one foot of head. Lugs in the body prevent the cover or strainer from becoming separated from the body of the valve due to fl ow. Both can be removed when necessary, however, by turning to the right or left.Both Floor-Type and Wall-Type Valves use two Neoprene seating surfaces so if particles of grit lodge on them, the head of liquid in the tank will force the valve closed. These valves are for low seating or unseating pressure applications only. Design uses C900 pipe gaskets in bell to securely retain PVC pipe to valve.
C900 PIPE GASKET retains the PVC pipe
Floor-Type Hydrostatic Tank Pressure Relief ValvesQuadroSeal™ Gasket Design – Available in Ductile Iron and Type 316 Stainless Steel
Floor-Type Pressure Relief Valves *
Wall-Type Pressure Relief Valves
are shown on pages G-37 and G-38.
© 2020 Trumbull Manufacturing, Inc.
09/01/20 Page Revision Page G-35
MATERIALDESCRIPTIONITEMStainless Steel (T316) or Ductile Iron (65-45-12)
Valve Body1
Neoprene (40 durometer)QuadroSeal Seat2Stainless Steel (T316) or Ductile Iron (65-45-12)
Strainer3
Stainless Steel (T316) or Ductile Iron (65-45-12)
Lid4
SBRRieber Gasket5C900 PVC PipeLength Extender6
Drawn to Scale
TANK PRESSURE RELIEF VALVEFLOOR TYPE
01/07/13BJE
Drawn:Original document Youngstown, Ohio
www.trumbull-mfg.com
Valve size 4 6Overall height - closed 7-5/8" 7-59/64"
Lid lift distance 1" 1"Seat O.D. 6" 8"
Base Housing O.D. 6-11/32" 8-5/8"Fits C900 pipe size 4" 6"
Wall collar O.D. 5-27/32" 8-1/8"Body seat face to Collar CL 3" 2-7/8"
Strainer flow area 7.3 sq. in 18.9 sq. in
1
6
2
3
5
4
Strainer restraint lug
Lid locking lug
Wall collar
Slotted opening for Strainer installation and removal
Note: Ductile Iron components arecoated with Tnemec N140-1211 epoxy(complies with NSF 61).
Base HousingSize Material Part Number Weight4" DI 367-1556 13.2 lb4" SS 367-1540 14.5 lb6" DI 367-1578 23.1 lb6" SS 367-1544 22.3 lb
Lid locking lugs
© 2020 Trumbull Manufacturing, Inc.
09/01/20 Page Revision Page G-36