FloBoss TM 104 Flow Manager

Flow Computer Division

FB1041 of 30

ESC to Exit

FloBossTM 104 Flow ManagerFloBossTM 104 Flow ManagerNow, one flow computer is cost effective for either rotary or turbine metering.

Flow Computer Division FB1042 of 30

ESC to Exit

Introducing the FloBossTM 104Introducing the FloBossTM 104

The FloBossTM 104 is a compact, high-performance flow computer that is cost effective for fiscal measurement.

It performs API 21.1 compliant flow measurement when used with pulse-generating devices, such as rotary, turbine, and ultrasonic meters.

The FloBoss 104 shares its advanced technology platform with the FloBoss 103, its orifice metering twin.


ESC to Exit

Ideal for Rotary and Turbine MeteringIdeal for Rotary and Turbine Metering

The FloBoss 104 mounts directly to a rotary or turbine meter and easily handles the slow rotational speed of a rotary meter or the high-speed pulse trains generated by most turbine meters.

When line pressure and temperature are measured along with the pulse train, the FloBoss 104 can provide high-accuracy flow measurement.


ESC to Exit

High Performance Pulse and Pressure SensingHigh Performance Pulse and Pressure Sensing

When used with a Rotary meter, the Pulse Interface Module creates and measures electrical signals (pulses) from the rotary meter and raw pressure inputs from the pressure transducer.

When used with a Turbine input, the pressure is measured by the pressure transducer and pulses from the turbine meter are measured by the Pulse Input on the optional I/O board.


ESC to Exit

FloBoss 104 Typical ApplicationsFloBoss 104 Typical Applications


ESC to Exit

FloBoss 104 Functional OverviewFloBoss 104 Functional Overview

The FloBoss 104 provides these outstanding functional features:– API/AGA Compliant Flow Measurement

– Historical Databases

– Event and Alarm Logs

– Integrated Communications

– Spontaneous Report-by-Exception (SRBX) Host Communication

– Pass-Through Communications

– Closed-loop PID Control

– Logic and Sequencing Control

– ROCLINK 800 Configuration Interface

– Data Security


ESC to Exit

API/AGA Compliant MeasurementAPI/AGA Compliant Measurement

The FloBoss 104 calculates gas flow in accordance with AGA7 turbine flow calculations, using AGA8 compressibility methods.

Pulse counts and pressure measurement come from the Sensor Assembly, and gas temperature is acquired through an external RTD probe.


ESC to Exit

Historical DatabasesHistorical Databases

The FloBoss 104 maintains API Chapter 21.1 compliant historical archives for measured and calculated values, and events/alarms.

Up to 35 standard history points can be archived on an hourly and daily basis for up to 35 days.

An extended history database supports data logging at intervals from 1 to 60 minutes, giving operators the flexibility to meet the needs of advanced applications.


ESC to Exit

Event and Alarm LogsEvent and Alarm Logs

The Event Log records the last 240 parameter changes and power on/off cycles.

The Alarm Log records the last 240 occurrences of alarms (set or clear).

The logs can be viewed, saved to a disk file, or printed by using ROCLINK 800 software.


ESC to Exit

Integrated CommunicationsIntegrated Communications

The FloBoss 104 offers a built-in EIA-485 port and an optional EIA-232 port or dial-up modem port for host communications.

An optional spread-spectrum radio interface supports either FreeWave M-Series or MaxStream 9X Stream spread-spectrum radios that fit entirely within the FloBoss 104 enclosure.


ESC to Exit

SRBX Host CommunicationSRBX Host Communication

Spontaneous Report-By-Exception (SRBX) communication allows the FloBoss 104 to automatically report any alarm to a host computer.

SRBX can be performed over a dial-up modem or serial line to a host that is set up for receiving field-initiated calls.


ESC to Exit

Pass-Through CommunicationsPass-Through Communications

Pass-through gives the FloBoss 104 the capability to pass information between a host and devices connected to the FloBoss 104 that use ROC or Modbus protocol.

Pass-through reduces the cost of communication when several devices are geographically grouped.

Pass-through is available for use with RS-485, RS-232, or dial-up modem connections.


ESC to Exit

Closed Loop PID ControlClosed Loop PID Control

PID (Proportional, Integral, and Derivative) closed-loop control provides stable operation of a feedback control loop that employs a regulating device, such as a control valve.

The PID loop has its own user-defined input, output, and override capability.


ESC to Exit

Logic and Sequencing ControlLogic and Sequencing Control

Analog and discrete sequencing control is implemented through a Function Sequence Table (FST).

The FST defines the actions to be performed by the FloBoss 104 through a series of Functions.

The FST is developed using ROCLINK 800 software.


ESC to Exit

ROCLINK 800 Configuration InterfaceROCLINK 800 Configuration Interface

ROCLINK 800 is the easy-to-use software for configuration and downloading data.

Compatible with other FloBoss and ROC products for mixed-product installations.

On-line Help screens get first-time users up and running quickly.


ESC to Exit

Data SecurityData Security A maximum of 16 log-on

identifiers (IDs) for operators can be stored.

The log-on ID entered into ROCLINK must match one of the stored IDs for the unit to communicate.

Both the operator interface and host can have the same security. Security levels may be determined by user and access level.


ESC to Exit

FloBoss 104 Technical FeaturesFloBoss 104 Technical Features

Sensor assembly and rotary meter interface

32-bit Processor Built-in Battery Pack & Charger Embedded Communications Expandable I/O Rugged CSA-Approved Design Local Operator Display Solar Panel and Mast


ESC to Exit

FloBoss 104 Component OverviewFloBoss 104 Component Overview

ProcessorMemoryBackup

LCDBattery Pack

& Charger

Modem / RS232 Backplane Pulse Interface Module

TerminationBoard


ESC to Exit

High-Accuracy Pulse Interface ModuleHigh-Accuracy Pulse Interface Module

Generates 1,000 pulses / revolution for high-resolution measurement

Uses reliable non-contact pulse sensing

Built-in pressure transducers measure upstream and downstream pressure

Bi-directional pulse detection and diagnostics for easy installation, setup, and maintenance

No gear trains to load down the metering device and cause inaccuracies.


ESC to Exit

Built-n Pressure TransducersBuilt-n Pressure Transducers

One pressue transducer can measure line pressure and the other downstream or station inlet pressure if desired.

Accuracy is 0.35% of Span for all range options.

Range Options are: – 0 to 100 psi (0 - 6.9 bar)– 0 to 300 psi (0 - 20.7 bar)– 0 to 1000 psi (0 - 69 bar)


ESC to Exit

32-Bit Processor / Backplane32-Bit Processor / Backplane

High performance 32-bit processor is designed for low-power applications.

Memory consists of:– 128 Kb flash boot ROM

– 2 Mb flash program ROM

– 512 Kb of data RAM

All boards plug into a backplane making removal and replacement quick and easy.

Processor

Backplane


ESC to Exit

Built-In Battery PackBuilt-In Battery Pack

Rechargeable lead acid batteries provide more than 15 days of autonomy, at one modem poll per day, without recharging.

Real-time clock and static RAM are backed up with a 3.6V lithium battery.


ESC to Exit

Embedded CommunicationsEmbedded Communications

Local Operator Interface port uses RS-232C format.

Standard RS-485 port is configurable for 600 to 19.2 K baud.

Communication to a Host is supported by an optional RS-232 or modem card.

Available protocols include ROC or Modbus Slave (ASCII or RTU).

RS-232 &ModemCards

SpreadSpectrumRadio


ESC to Exit

Termination Board

Expandable I/OExpandable I/O

Input for 2 or 3-wire RTD element.

Diagnostic inputs for internal voltage, battery voltage, and enclosure/battery temperature are built-in.

Optional I/O board adds 6 channels of I/O to further increase its measurement and control capabilities.


ESC to Exit

Rugged CSA-Approved DesignRugged CSA-Approved Design

The FloBoss 104 is approved for use in Class I, Division 1 and Division 2 areas.

The Solar Panel and Mast Assembly are approved for use in Class I, Division 2 areas only.

Housing and end caps are die-cast aluminum alloy with iridite plating and paint.

Field wiring routes through side-mounted conduit ports and connects to the termination board located behind a removable end cap.


ESC to Exit

Local Operator Display (Optional)Local Operator Display (Optional)

Flow information scrolls on a two-line liquid crystal display (LCD).

Values (8 numerals) and descriptions (5 alpha-numeric characters) are displayed.

Users configure displayed information according to their needs.


ESC to Exit

Solar Panel and Mast (Optional)Solar Panel and Mast (Optional)

Optional solar panel and mast attach to the top of the FloBoss 104.

Solar panel can be positioned 360 degrees in azimuth and 90 degrees in elevation for optimal sun coverage.

A 2-watt or 5-watt solar panel can operate the FloBoss 104 indefinitely in a typical installation, depending on radio useage.


ESC to Exit

Go With the Leader in Process Control...Go With the Leader in Process Control...

ApplianceSolutions

MotorTechnologies

ProfessionalTools

StorageSolutions

IndustrialAutomation

ClimateTechnologies

NetworkPower

ProcessManagement

Emerson Power & Water Solutions


ESC to Exit

...And the Leader in Products and Service...And the Leader in Products and Service

Rated “Very Good” or better in 33 Service

Categories

More than twice our closest competitor

#1 IN SERVICES

1st/2nd/3rd PLACE FINISHES

Emerson 39Rockwell 17Honeywell 16Invensys 14Siemens 15ABB 5

Emerson Process Management offers the industry's broadest array of process-automation products.

So it's not surprising that, in an independent survey conducted by Control magazine, users have once again ranked our products first in more categories than any other supplier.


ESC to Exit

Go with Emerson Process Management!Go with Emerson Process Management!

For detailed information on the FloBoss 104 and other Fisher products, contact your Emerson Process Management Representative or call:

– 1-800-807-0730 (U.S. & Canada only)

– 1-641-754-3449 (Worldwide) You can also visit us on the World

Wide Web at:

– www.EmersonProcess.com/flow

Documents

FloBoss TM 104 Flow Manager