Upload
others
View
18
Download
0
Embed Size (px)
Citation preview
ENLIGHTENEDTHINKING®
COMPATIBLE POWER SUPPLIESInterior Applications• Q6M-DC+CAP• QTM-eLED, QTM-DC+CAP• iQ-PH
Exterior Applications• QOM-eLED, QOM-DC+CAP• Q-SET-eLED • iQ-PH
.62"
.62"BEAM ANGLE
LIGHT SOURCESTANDARD DIMENSION
160º
iQA-FLS-NONL iQA-FLS-SELF
COMPATIBLE EXTRUSIONS
CUTTING INSTRUCTIONS:
COMPLIANTThis flex light can be cut on the dotted line mapped on the unit at every 2.19".
Lead wire comes in 11.5" (18/2 AWG)
2018.V02
© 2018, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com 1
PROJECT NAME DATE TYPE NOTECOMPANY
NOTE: The warranty is only valid if compatible power supplies are used.
CRI Watts Per FT LengthFlex seriesiQ series Color Temp
iQ67 - - FLS - 80 - 3.3 -
The FLEX series is the ideal linear LED fixture for architectural spaces where the light will be in direct view. As the name implies, these LEDs are flexible and can be easily molded into different curvatures. The enclosure and the lens allow for a perfect monochromatic light source with no hot spots. All of Q-Tran's FLEX series LEDs are made with high quality SMD LED chips, are UV and flame resistant, and are extremely energy efficient. The FLEX Square is available in white in a variety of different color temperatures; 2700K, 3000K, 3500K and 4000K. Flex Square provides an alternative to glass Neon tube for indoor, outdoor, signage & architectural applications.
FEATURESiQ67-27-FLS-80-3.3 Max Run / Reel Length: 30ft | Color Temp: 2700K | Voltage: 24VDCCRI: 80+ | Watts Per Ft: 3.3 | FLS=Flex Square | Lumens per foot: 130
iQ67-30-FLS-80-3.3 Max Run / Reel Length: 30ft | Color Temp: 3000K | Voltage: 24VDCCRI: 80+ | Watts Per Ft: 3.3 | FLS=Flex Square
iQ68-35-FLS-80-3.3 Max Run / Reel Length: 30ft | Color Temp: 3500K | Voltage: 24VDCCRI: 80+ | Watts Per Ft: 3.3 | FLS=Flex Square
iQ68-40-FLS-80-3.3 Max Run / Reel Length: 30ft | Color Temp: 4000K | Voltage: 24VDCCRI: 80+ | Watts Per Ft: 3.3 | FLS=Flex Square
FLEX SERIES IP67
FLEX SQUAREWET RATED
• High quality SMD LED chip• Ambient temperature: -4ºF ~ +113ºF• UV & Flame resistant construction• Uniform & Even light source with no LED “hotspots”• 11.81" min. bending diameter• Run lengths up to 60 feet* *For runs greater than 30 feet, 2 independent 100W drivers are required. One powering and wired to each end.
• Environmentally friendly & energy efficient• UL 2108 – Low Voltage Lighting Systems• UL 1598 – Luminaires• 2 year warranty
© 2018, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
ENLIGHTENEDTHINKING®
2
FLEX SERIES IP67
COMPATIBLE EXTRUSIONS
iQA-FLS-NONL: Non-Self-locking aluminum profile
7.85”
4”
19.75”
01 02 01 02 01 02 01 02
7.85”
Side view
Bottom view
Flex LED
.27"
.72"
Length : 1.5, 19.75, 39.5, 79 in Dimension : 0.75 x 0.72 x 0.74 in Material : Anodized Aluminum Fits : Flex SquareScrews : 0.72 x 0.27 in
Length : 1.5, 19.75, 39.5, 79 in Dimension : 0.81 x 0.79 x 0.79 inMaterial : Anodized Aluminum Fits : Flex Square Screws : 0.72 x 0.27 in
.55"
.63"
.53"
.65" 39.5"
.59"
.72".66".32"
.75"
.74"
iQA-FLS-SELF: Self-locking aluminum profile (Used with clip)
.79".65"
.81".60"
.68"
.48"
.79"
© 2018, Q-Tran Inc. 155 Hill St. Milford, CT 06460. All rights reserved - 203-367-8777 - [email protected] - www.q-tran.com
ENLIGHTENEDTHINKING®
INJECTION-MOULDED CONNECTOR
FLS - IMBC -
L = 1', 3',10'
FLS - IMFC -
L1 = 1', 3',10'
FLS - IMSC -
L2 = 1', 3',10'
FLS - IMEC BACK CONNECTOR FRONT CONNECTOR SIDE CONNECTOR END CAP
FLS - CFC -
L = 1', 3',10'
FLS - CEC
CLASP CONNECTOR
FRONT CONNECTOR END CAP
.69"
.43"
.63"
.69"
.47"
.63".43"
.47"
.69"
.63"
.43"
.47"
.69"
.63"
L = 1', 3', 10' L1 = 1', 3', 10'
L2 = 1', 3', 10'
2.40"
.85"
.62"
.75" .85" .75"
1.87"
L = 1', 3', 10'
FLEX SERIES IP67
TYPES OF CONNECTOR
3
.62"