Technical InsulationMarine ins./Fire protection

4 - 10.6.1

May 2008

Replaces: January 2008

Fire Protection and

Applications

2

Content

The information in this brochure represents the sole and comprehensive description of the condition of the product and its technical properties. However, the content of this brochure does not mean granting a commercial guarantee. In so far as the product is used in an area of use which is not provided for in this brochure, we cannot warrant its suitability for said area of use unless the suitability was expressly confirmed by us upon request. This brochure replaces all previous brochures. As a result of constant further development of our products we reserve the right to make alterations to brochures.

PAROC is registered trade mark of Paroc Oy Ab.© Paroc Group 2007

PAROC Marine insulations meet all requirements .........................................3

Steel decks and bulkheads .....................4

• Fire protection with slab solutions .......4

• Fire protection with mat solutions ........6

Aluminium decks and bulkheads ............8

• Fire protection with slab solutions ........8

• Fire protection with mat solutions ......10

Engine rooms ......................................12

Air-conditioning machine rooms ...........13

General applications ............................14

FIre ProTeCTIon And APPlICATIons

3

The shipbuilding industry sets very high requirements for safety and comfort on board. Products and constructions to be used for fire protection must be tested and approved according to the rules and regulations of IMO (International Maritime Organisation).

Ships sail in very different conditions, which sets high requirements for thermal insulations. Different kinds of machinery and equipment, passenger facilities, restaurants etc. need sufficient sound insulation to guarantee comformity. Paroc offers economical and safe solutions.

Highly developed products, manufactured for the current needs of the shipbuilding industry and its subcontractors, are already widely used.

PAroC Marine insulations meet requirementsPAROC Marine insulations meet the requirements of their users in the following areas:• Fireprotectionofconstructionsand

components• Heatingeconomyofshipsand

comfort of their passengers, heat and cold insulations

• Goodacousticpropertiesofconstructions and devices

• Insulationmaterialsusedassurfacematerials are functional and easy to clean

• MeetingtherequirementsofClassificationInstitutesandNational Marine Authorities in accordance with the rules and regulationsofIMOandtheMarineEquipment Directive (modules B and D).

PAroC – The expert in insulation materialsThrough market knowledge and research conducted alongside our customers, Paroc has secured its strong position as a manufacturer of insulating materials.

All Paroc factories have a certified quality system.

non-combustibilityPAROC Marine insulations are manufactured from stone. Stone wool has excellent properties as a passive guarantee of the fire safety of ships.

PAROC stone wool products are capable of withstanding high temperatures. The binder starts to evaporate when its temperature exceeds approximately 200°C, and while the insulating properties remain unchanged, the compressive stress weakens. The stone wool products’ softening temperature is over 1,000°C.

The determination of non-combustibility in accordance with IMOFTPCodePart1hasbeenperformed for all PAROC Marine insulations. Continuous quality control of the products is performed by VTT (Technical Research Centre of Finland).

Construction approvalsFireconstructionsusedwithinshipbuilding must be tested for their fire resistance, in accordance with therulesandregulationsoftheIMO(InternationalMaritimeOrganisation).Based on the approved test result, the ClassificationInstitutesandNationalMarine Authorities grant the required approvals.Forthispurpose,theproducts

have been tested in various A-class deck and bulkhead constructions and in numerous fire door and panel constructions.

PAroC® Marine insulations meet all requirements

4

FIre ProTeCTIon And APPlICATIons

steel decks and bulkheads

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

steel decks:1 A60 PAroC Marine Fire slab 100 100 40/25

A30 PAroC Marine Fire slab 100 100 25/25

steel bulkheads:

2 A60 PAroC Marine Fire slab 100 100 60/25

A30 PAroC Marine Fire slab 100 100 40/25

Products to use with stiffeners:

3 PAroC Marine Fire slab 100, HP 100

4 PAroC Marine Fire slab 100, HPl 100

5 PAroC Marine Fire slab 100, T 100

6 PAroC Marine Fire slab 100, l 100

7 PAroC Marine Fire slab 100, Pulb 100

8 PAroC Marine Fire slab 100, T 100

Insulating thickness, mmFloating floor:

9 PAroC Marine Floor slab 140 140 50

1

2

34

56

7

8

9

Fire protection with slab solutions

Notice! PAROC Marine Fire Slab 100 can be covered with aluminium foil or with black or white glass fibre clothing.

FIre ProTeCTIon And APPlICATIons

5

steel decks A60 and A30

steel bulkheads A60 and A30

Example of A60 class insulation solution for steel deck. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on deck is 40 mm and on stiffener 25 mm.

Example of A30 class insulation solution for steel deck. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on deck is 25 mm and on stiffener 25 mm.

Example of A30 class insulation solution for steel bulkhead. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on bulkhead is 40 mm and on stiffener 25 mm.

Example of A60 class insulation solution for steel bulkhead. Base product is PAROC Marine Fire Slab 100 and preformed block is Pulb. Insulating thickness on bulkhead is 60 mm and on stiffener 25 mm.

FIre ProTeCTIon And APPlICATIons

6

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

steel decks:1 A60 PAroC Marine Wired Mat 100 100 40/40

A30 PAroC Marine Wired Mat 80 80 30/30

A15 PAroC Marine Wired Mat 80 80 30/30

steel bulkheads:

2 A60 PAroC Marine Wired Mat 100 100 80/30

A30 PAroC Marine Wired Mat 100 100 40/30

A15 PAroC Marine Wired Mat 80 80 30/30

1

2

steel decks and bulkheads

Fire protection with mat solutions

Notice! PAROC Marine Wired Mats can be covered with aluminium foil or with black or white glass fibre clothing.

FIre ProTeCTIon And APPlICATIons

7

steel decks A60, A30 and A15

steel bulkheads A60, A30 and A15

Example of A15 class insulation solution for steel bulkhead. Product is PAROC Marine Wired Mat 80. Insulating thickness is 30 mm.

Example of A60 class insulation solution for steel bulkhead. Product is PAROC Marine Wired Mat 100. Insulating thickness on bulkhead is 80 mm and on stiffener 30 mm.

Example of A30 class insulation solution for steel bulkhead. Product is PAROC Marine Wired Mat 100. Insulating thickness on bulkhead is 40 mm and on stiffener 30 mm.

Example of A60 class insulation solution for steel deck. Product is PAROC Marine Wired Mat 100. Insulating thickness is 40 mm.

Example of A30 class insulation solution for steel deck. Product is PAROC Marine Wired Mat 80. Insulating thickness is 30 mm.

Example of A15 class insulation solution for steel deck. Product is PAROC Marine Wired Mat 80. Insulating thickness is 30 mm.

FIre ProTeCTIon And APPlICATIons

8

Aluminium decks and bulkheads

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

Aluminium decks:1 A60 PAroC Marine Fire slab 100 100 25 + 25/25 + 25

Aluminium bulkheads (must be insulated on both sides):

2 A60 PAroC Marine Fire slab 100 100 30 + 30/30 + 30* 30 + 30 **

Products to use with stiffeners:

3 PAroC Marine Fire slab 100, HP 100

4 PAroC Marine Fire slab 100, HPl 100

5 PAroC Marine Fire slab 100, T 100

6 PAroC Marine Fire slab 100, l 100

* Insulating thickness (level/stiffener) on stiffeners side

** Insulating thickness on other side

13

4

2

5

6

Fire protection with slab solutions

Notice! PAROC Marine Fire Slab 100 can be covered with aluminium foil or with black or white glass fibre clothing.

FIre ProTeCTIon And APPlICATIons

9

Aluminium deck A60 Aluminium bulkhead A60

Example of A60 class insulation solution for aluminium deck. Base product is PAROC Marine Fire Slab 100 G1 and preformed blocks HP and Pulb. Insulating thickness in all products is 25 mm.

Example of A60 class insulation solution for aluminium bulkhead. Base product is PAROC Marine Fire Slab 100 G1 and preformed blocks HP and Pulb. Insulating thickness in all products is 30 mm.

FIre ProTeCTIon And APPlICATIons

10

Aluminium decks and bulkheads

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

Aluminium decks:1 A60 PAroC Marine Wired Mat 100 100 50/50

Aluminium bulkheads (must be insulated on both sides):

2 A60 PAroC Marine Wired Mat 100 100 60/60 * 60 **

* Insulating thickness (level/stiffener) on stiffeners side** Insulating thickness on other side

1

2

Fire protection with mat solutions

Notice! PAROC Marine Wired Mats can be covered with aluminium foil or with black or white glass fibre clothing.

FIre ProTeCTIon And APPlICATIons

11

Aluminium deck A60 Aluminium bulkhead A60

Example of A60 class insulation solution for aluminium deck. Product is PAROC Marine Wired Mat 100. Insulating thickness is 50 mm.

Example of A60 class insulation solution for aluminium deck. Product is PAROC Marine Wired Mat 100. Insulating thickness is 60 mm on both sides.

FIre ProTeCTIon And APPlICATIons

12

engine rooms

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

decks:1 A60 PAroC Marine Fire slab 100

+ white glass fibre cloth100 40/25

Bulkheads:

2 A60 PAroC Marine Fire slab 100 + white glass fibre cloth

100 60/25

Pipes (vapour, heating, fuel oil, sewage, warm water, etc.):

Insulating thickness, mm

3 PAroC section + white glass fibre cloth

100

exhaust pipe:

4 PAroC Marine Wired Mat 100 100 80

exhaust pipe dampers:

5 PAroC Marine Wired Mat 100 100 80 + 80

1

2

3

4

5

FIre ProTeCTIon And APPlICATIons

13

Air-conditioning machine rooms

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

decks:1 A0 PAroC Marine slab 40

+ white glass fibre cloth40 50/50

Bulkheads:

2 A0 PAroC Marine Wired Mat 28 + white glass fibre cloth

28 50/50

Insulating thickness, mmAir conditioning ducts:

3 PAroC lamella Mat 50 AluCoat 50 25

Pipes (cooling and cold water):

4 PAroC section AluCoat T 100 20 - 50

1

2

3

4

FIre ProTeCTIon And APPlICATIons

14

General applications

Class Productdensity kg/m3

Insulating thickness level/stiffener, mm

decks: 1 A60 PAroC Marine Fire slab 100 100 40/252 A60 PAroC Marine Fire slab 100 + black glass fibre cloth 100 40/25

Bulkheads: 3 Thermal PAroC Marine Wired Mat 28 28 50-100/50-100

Thermal PAroC Marine slab 40 40 50/50

Cabin: Insulating thickness, mm

Wall 4 B15* PAroC Marine slab 220 + grey non-woven tissue 220 15

Roof 5 B15* PAroC Marine slab 80 80 70

Door 6 B15* PAroC Marine slab 160 160 40

Corridor: Insulating thickness, mm

Wall 7 B15* PAroC Marine slab 160 160 15

Roof 8 Sound PAroC Marine slab 80 80 25

Door 9 A60* PAroC Marine slab lo 150 150 70

Wall extension 10 B15* PAroC Marine slab 220 + grey non-woven tissue 220 10+10

Floating floor: 11 A60 PAroC Marine Floor slab 140 140 50

* An example of customer constructions where PAROC products are used.

1 2

11

10

3

4

5

6

7

8

9

More information from www.paroc.comThe latest information on our products and solutions is available on our web pages. As part of our service package for you, we keep our web pages constantly updated.

Paroc Group Oy Ab is one of the leading manufacturers of mineral wool insulation products and solutions in Europe. PAROC® products and solutions include building insulation, technical insulation, marine insulation, structural stone wool sandwich panels and acoustics products. We have production facilities in Finland, Sweden, Lithuania and Poland. We have sales and representative offices in 13 countries in Europe.

Building Insulation produces a wide range of products and solutions for all traditional building insulation. The building insulation is mainly used for the thermal, fire and sound insulation of exterior walls, roofs, floors and basements, intermediate floors and partitions.

Technical Insulation is used for thermal, fire and sound insulation in building techniques, industrial processes and pipe work, industrial equipment and ship structures.

PAroC Fire Proof Panels® are steel-faced lightweight panels with a core material of stone wool. Paroc panels are used for façades, partition walls and ceilings in public, commercial and industrial buildings.

PAROC OY ABTechnical InsulationP.O.Box 294FI-01301 Vantaa, FinlandTel. +358 46 876 8000Fax +358 46 876 8003technical.insulation@paroc.comwww.paroc.com

A M E M B E R O F P A R O C G R O U P1083TIEN0508

Don

e In

form

atio

n O

y