Complete L i fe Safety ProductsFor U.S.A . Eng inee red Sys tem Di s t r ibu to r s

Conventional Fire Alarm Control Panels

Six, eight and twelve zone configurationsLED and LCD display configurationsPowerful 5 Amp dedicated power supplyConfigurable UDACT/Digital Communicator (on select models)Optional city tie/polarity reversal modulesBuilt-in sync protocols for major strobe manufacturers

••••

••

Remote upload/download capabilities (on models with UDACT)Individual circuit disconnect buttonsRemote relay modulesRemote programming capabilityTwo event history logs - 200 events per logOptional modules for internal relay circuits

•

•••••

FA-300 SerieS Fire ALArm ControL PAneLSDesigned for small to medium commercial, institutional and industrial occupancies, the FA-300 Series Fire Alarm Control Panels are powerful enough to meet today’s installation demands. The FA-300 Series are available in six, eight and twelve zone models with a built-in UDACT/Digital Communicator on select models. The FA-300 Series are available in LED or LCD display configurations.

Each indicating circuit can be configured as silenceable or non-silenceableEach initiating circuit can be configured as Alarm, Supervisory, Waterflow or TroubleTwo LEDs per initiating circuit; one for Trouble and one for StatusRS-485 interface for remote multiplex annunciatorsInterface for remote trouble indicatorEasy configuration via push buttons and program switches on the front panel

•

•

•

•

••

Fully site or field programmable indicating circuits and auxiliary relaysSlide-in labels for zone identification6 Amp power supplyRemovable door for easy installation and servicingRemovable terminal blocks for easy wiring and servicingIndividual disconnect switchesEight to seventy two point systemModular design

•

•••

•

•••

FA-1000 SerieS Fire ALArm ControL PAneLSThe FA-1000 Series Fire Alarm Control Panels are multi-zone units designed for maximum flexibility and easy installation and operation. Fully configurable from the front panel using push buttons and program switches, the FA-1000 Series enables the user to configure the system to meet their specific requirements.

Two or five Class B (Style B) dual-use zonesTwo Class B (Style Y) notification appliance circuits4.2 Amp power supply500mA of aux. powerCommon alarm and trouble relay‘Secur-Bus’ for UDACT & remote annunciatorEvent buffer

••

•••••

Six programmable zone optionsClass A capabilityOne-man walk testProgrammable silence timersFront panel programmingIntegral battery chargerInitiating circuits can be configured for sprinkler alarm and supervisory

•••••••

FA-260 SerieS Fire ALArm ControL PAneLSThe FA-260 Series are power-packed Fire Alarm Control Panels designed for small building fire protection. The FA-260 Series offer an exceptional feature set, a power supply that will handle the panel’s full rated load, and flexible front panel programming for quick and simple configuration to suit the application at hand. Powerful, versatile, and ideally suited for small, fast turnaround fire applications.

2 11

10 3

Field configurable to operate with a Deluge Sprinkler System, a Pre-Action Sprinkler System and an Agent Release SystemSix Class B (Style B) input circuitsFour Class B (Style Y) output circuitsTrue Class A circuit configurationCross zone optionCounting zones optionSpecial releasing power supply and release activation considerations preventing false dumpsConfigurable to perform two hazard areas

•

••••••

•

5 Amp Power SupplySimple panel programming through eleven pre-configured modes of operationNon-Verified Alarm, Non Latching Supervisory, Latching Supervisory or Agent Release/Water Flow depending on the Mode of Operation selectedConfigurable input circuits (2) for Manual Release Input, Abort Input or bothConfigurable output signals for steady tone (fixed) or escalating tone (changes as input operation changes)

••

•

•

•

Fr-320 SerieS Agent reLeASe ControL PAneLSMircom’s FR-320 is a dual releasing control panel that is field configurable for use on Deluge Sprinkler Systems, Pre-Action Sprinkler Systems and Agent Release Systems. The mode of operation is easily configured by selecting one of eleven pre-configured modes of operation. The simple configuration process is done via the front panel and requires no laptop or complicated programming. The FR-320 is available with or without a built-in UDACT/Digital Communicator.

Agent release Control Panels

Addressable Fire Alarm Control Panels

Single addressable loop that supports 126 addressable points2 line by 20 character back-lit LCD displayPowerful 5 Amp dedicated power supplyFour Class B (Style Y) indicating circuitsIncludes 32 zone LED annunciator that can be expanded to 64 zones (32 alarm and trouble LEDS)Two event history logs - 200 events per logConfigurable for two stage operationSupports LCD, LED and graphic annunciatorsConfigurable via the front panel, PC configurator, or remote dial up through the built-in modem (UDACT models)Software bypass groupsPoints can be any combination of Sensors or ModulesSupports Ionization Sensors, Photoelectric Sensors, Variable Heat Sensors and Multi–Sensor (Heat/Photo)

•

••••

••••

••

•

5 Amp Power SupplyModel available with an integrated UDACT/Digital CommunicatorDigital Communicator can be configured for DACT or UDACT mode of operationBuilt-in sync protocols for the following strobe manufacturers: Mircom, Amseco, System Sensor, Gentex, Faraday and WheelockRelay contacts for Common Alarm, Auxiliary/Alarm (Disconnectable), Common Supervisory and Common TroubleConfigurable Signal Silence Inhibit, Auto Signal Silence, Two Stage Operation and One-man walk testRS-485 Interface for Remote LED and LCD AnnunciatorsOptional modules for additional internal relay circuits and City Tie/Polarity Reversal Optional trim ring for semi-flush mounting

••

•

•

•

•

•

•

•

FX-350 SerieS AddreSSAbLe Fire ALArm ControL PAneLSThe FX-350 Series Analog Addressable Fire Alarm Control Panels are single loop addressable panels with support for up to 126 addressable points. Select models are available with a built-in UDACT/Digital Communicator. Easy to install and operate, the FX-350 Series is ideal for small to medium commercial, institutional and industrial occupancies.

FX-350 SerieS AddreSSAbLe deviCeSAnalog Addressable Sensors/Addressable modules/Addressable Pull StationsMircom offers a complete line of addressable devices for the FX-350 including:

Analog addressable sensors (ionization, photoelectric, thermal and multi-criteria sensors) all available with a variety of mounting bases to accommodate even the most difficult installation needs.

• Addressable modules (monitor, output, relay and isolator modules)Addressable pull stations (single and dual-action)

•

•

FX-2000 SerieS AddreSSAbLe deviCeSAnalog Addressable Sensors/Addressable modules/Addressable Pull StationsMircom offers a complete line of addressable devices for the FX-2000 including:

Large system capacitySLCs are selectable for either Class A (Style 6) or Class B (Style 4) operationFour Class A/B (Style Z/Y) indicating circuitsLarge 4 line by 20 character back-lit LCD displayPanel security to protect site configurationsSixteen-zone configurable LED annunciatorSupports LCD, LED and graphic annunciationModular design198 addressable devices per SLCBase system supports 16 conventional hard wired modules with the provision to add more using the ALC-H16 Hard wire Loop Controller ModuleThree level password protection with field programmable definition which enables the installer to determine what functions are accessible for each password levelCorrelatable Switch Inputs which allows for multi-functional outputs

••

••

••••••

•

•

Four Alarm Queues with selector switches and LEDs for Alarm, Supervisory, Monitor and TroubleAuxiliary relay contacts for Common Alarm, Common Supervisory and Common TroubleRS-232 output for remote system printer or CRTTwo logs track system event history (2000 events) and alarm event history (1000 events) which can be viewed on screen or sent to a printer for easy analysis and system maintenanceFront Panel Auto-Configure and/or Computer laptop ProgrammableCommon Control switches and/or indicating LEDs for System Reset, Signal Silence, Fire Drill, Acknowledge, General Alarm, Lamp Test, A.C. On, Pre-Alarm and Ground FaultSeamlessly integrates to the QX-5000 Voice Evacuation System via an RS-485 interface6 or 12 Amp power supply

•

•

••

•

•

•

•

FX-2000 SerieS AddreSSAbLe Fire ALArm ControL PAneLSThe FX-2000 Series is ideal for residential, commercial, industrial, and institutional applications. The base system consists of one analog loop and four indicating circuits. In addition the base system supports conventional hard wired modules. With its flexible modular design, the FX-2000 Series can be configured to meet challenging requirements without compromising its easy installation and operation.

Addressable Fire Alarm Control Panels

RAX-LCD Remote Shared DisplayProvides LCD annunciationDriver module for standard or reduced zone annunciationDriver modules for RAX-1048, FDX-008 and IPS-2424 when mounted remotely

IPS-2424 Programmable Input Switches Module

24 programmable switchesSwitches operate in a toggle operationIndicates status of disconnected zones

••

•

•••

RAX-1048 Programmable LED Annunciator Module

48 programmable bi-colored LEDs

FDX-008 Fan Damper Control ModuleIndividual programmed circuits for fan or damper controlThree position selector switch for off, on and autoSupervised for operation

•

•

•

•

FX-2000 ProgrAmmAbLe modULeSThe FX-2000 Addressable Fire Alarm Control Panels support programmable modules which can be connected either internally to the fire alarm panel or externally via the RAX-LCD Remote Shared Display. Connection to the RAX-LCD allows for unique configurations for a specific remote location.

Analog addressable sensors (ionization, photoelectric, thermal and multi-criteria sensors) all available with a variety of mounting bases to accommodate even the most difficult installation needs.

• Addressable modules (monitor, output, relay and isolator modules)Addressable pull stations (single and dual-action)

•

•

4 9

8 5

Fire-Link - An AdvAnCed retro Fit AUdibiLity SoLUtionFire-Link by Mircom supplements the signalling capabilities of a building’s existing fire alarm system. By utilizing the building’s existing 120 VAC wiring, Firelink can satisfy stringent audibility requirements without the cost, mess and time associated with traditional retrofits.

Reduces labour from two man months to one man day on a typical fifty suite installationNo drilling, coring or fishing of new wiresNo surface raceway or electrical hardwareNo need to upgrade the existing fire alarm systemNo signal circuit isolator modules (in select areas)Audible devices plug directly into an existing AC outlet

•

•••••

Portable - Gets the sound where it is neededCompletely supervised and addressed to the suite number devicesSeamlessly connects to any existing fire alarm panelTamper proof and child resistant signalling devices

••

•

•

Fire-Link by mircom

Multi-channel, zoned voice paging and alarm systemMultiple lobby capabilityDistributed audio controlMultiple amplifier sizesZone or All-Call selectability (Alert/Evacuation)Provides single or multiple command center for use in emergenciesMultiple building interconnection (Campus Style)Removable terminal blocks for ease of installation and maintenance

•

•••••

•

•

Operates from integrated 24 VDC backup batteries in the event of a power failureZoned, fire fighter telephone capabilityIndication of all required fault conditionsSpeaker circuits are integrated with amplifier circuitsMultiple amplifier sizes (up to 7 per enclosure)Maintains full supervision during battery operationDigitized voice capabilityMicroprocessor based operations

•

•••

••

••

QX-5000 SerieS voiCe evACUAtion SyStemMircom’s QX-5000 Series is a multi-channel, zoned audio system that allows the operator to selectively page from a central location to any of the system’s audible devices. In addition, the QX-5000 allows for zoned, fire fighter communication with remote telephone handsets that are permanently installed throughout a building. The system has a simple interface to the Fire Alarm Control Panel, and contains its own power supply and battery backup system.

Fire Fighter teLePhone hAndSetSMircom’s Fire Fighter Telephones are designed to operate in conjunction with Mircom’s QX-5000 Series Emergency Zoned Audio System. These telephone handsets are permanently installed throughout a building to allow Fire Fighters easy communication with the main control panel.

Heavy-duty constructionRed finishFlush or surface mountKey-locked door

••••

Break glass insertRugged ABS plastic handsetPortable handsets also availableAddressable module available

••••

voice evacuation System

rA-1000 SerieS remote LCd AnnUnCiAtorSThe RA-1000 Series Remote Annunciators are multiplexed annunciators that provide control, indication of common annunciator functions and LED annunciation.

Large capacity of annunciationBi-colored LEDsSlide-in labels for each display pointSurface mount to standard gang outlet boxes

••••

Sealed membrane buttons and LED indicatorsLocal Buzzer, Silence and Lamp Test switches

•

•

rAm-300LCd SerieS remote LCd AnnUnCiAtorS The RAM-300LCD provides remote LCD annunciation through a 2 line by 20 character LCD display. The RAM-300LCD provides control switches as well as a numeric keypad to access the menu functions.

2 line by 20 character LCD displayLED indicators for AC On, Alarm, Supervisory, Trouble and CPU FailCommon control functions can be disabled on a per function basis

••

•

Available in a white enclosureFor use with the FA-300 and FX-350 Series Panels

••

rA-200 SerieS remote Led AnnUnCiAtorSThe RA-200 Series Remote Annunciators are multiplexed annunciators that provide cost effective control, status indication of common control functions and LED annunciation.

Available in eight and sixteen zone modelsEquipped with a keyswitch which allows for enabling and disabling of the common control functionsBi-colored LEDs

••

•

LED indicators for AC On, Common Trouble and Signal SilencedEach point can be identified by the corresponding label beside the LEDMounts in a 4-gang electrical box by others

•

•

•

remote Annunciators

mS-400 SerieS mAnUAL PULL StAtionSAttractive and durable, Mircom’s MS-400 Series Pull Stations provide manual fire reporting. The MS-400 Series Pull Stations are non-coded, single action devices which initiate an alarm when pulled.

Durable extruded aluminum constructionAttractive, low profile design

•

•

Standard single gang mountGlass rod optional

••

mS-700U SerieS mAnUAL PULL StAtionSMircom’s MS-700U Series Manual Pull Stations provide manual fire reporting. These high quality, die-cast metal pull stations are available in either single or dual action configurations with SPST contacts and terminal strip connections. All models are available with key resets, terminal connectors, SPST gold contacts and CAT-30 lock and keys.

Single or Dual ActionKey resettableTerminal connectors

•••

Available in english and bilingual versions

•

mS-700U SerieS emergenCy PULL StAtionSMircom’s MS-700U Series Emergency Pull Stations are high quality, die-cast metal pull stations that are designed to meet special use requirements. The MS-700U Series are designed for indoor and outdoor use.

Single ActionKey resettableHigh-gloss enamel in blue and yellow

•••

Normally open or normally closed alarm contactsTwo form “C” contacts

•

•

manual Pull Stations

6 7

mir-65 SerieS Smoke deteCtorSThe MIR-65 Series incorporate proven sensing technologies, together with advances in materials and electronics technology. Having a wide operating voltage of 9-33VDC, the MIR-65 Series detectors can be integrated into most Fire/Security systems. The MIR-65 Series wide voltage range family consists of photoelectric smoke, ionization smoke, and heat detectors.

2 and 4-wire basesAdvanced electronic technologyProven detection performance

•••

UL listedWide operating voltageAvailable in 2 and 4-wire kits

•••

Smoke And heat detectors

mdh-SL2000 SerieS dUCt deteCtorSThe MDH-SL2000 Series Duct Smoke Detectors are available in 2 and 4-wire ionization and photoelectric models. The MDH-SL2000 Series Duct Smoke Detectors are the latest innovation for early detection of smoke and products of combustion present in air moving through HVAC ducts in commercial, industrial and residential applications.

Photoelectric and Ionization models2 and 4-wire modelsUniversal voltageListed for high temperature applications

••••

Listed for velocities between 100-4000 ft./minLow flow technologyMagnet test capabilityLarge terminal connection screws

••••

i3 SerieS PhotoeLeCtriC Smoke deteCtorSThe i3 Series Smoke Detectors represent a significant advancement in conventional detection. The i3 family is founded on three principles: Installation Ease, Intelligence, and Instant Inspection and is available in Standard, Sounder, Auxiliary Form C Relay and Isolated Thermal models.

Plug-in detector line - mounting base included Large wire entry port In-line terminals with SEMS screws Stop-Drop ‘N’ LockTM attachment to base

••••

Built-in remote maintenance signalling Wide angle, dual color LED indication Built-in test switch

•••

dh-100 SerieS dUCt Smoke deteCtorSThe DH-100 Series Duct Smoke Detectors are available in 2 and 4-wire ionization and photoelectric models. Designed for simplified installation and easy maintenance, the DH-100 Series Duct Smoke Detectors feature low flow technology which enables duct smoke detection throughout a broad range of airflow environments.

Telescoping sampling tube 2 and 4-wire modelsOutside mounting tabs 12/24 VDC operation

••••

Low flow technologyIonization and Photoelectric models Textured cover for visual inspection Remote annunciator option

••••

beAm1224 SerieS beAm Smoke deteCtorSThe BEAM1224 is a 4-wire conventional projected beam smoke detector. It is uniquely suited for protecting open areas with high ceilings where other methods of smoke detection are difficult to install and maintain. It is to be used with UL/ULC listed compatible control panels only.

16 to 328 foot protection rangeSingle-ended, reflective designUser friendly alignment procedure6 user selectable sensitivity levels

••••

Digital display for easy alignmentBuilt-in automatic gain control compensates for signal deterioration from dust build-up

••

FirerAy reFLeCtive beAm Smoke deteCtor The system comprises of a single unit incorporating an infra-red transmitter and receiver. The signal generated in the transmitter element and reflected by the prism back to the receiver element is analyzed for the presence of smoke. The internal microprocessor determines an alarm condition when a predetermined level is reached.

Easy set up and alignmentSingle Compact HousingCalibrated obscuration test filter includedMicroprocessor controlled

••••

Alarm latching or auto resetAutomatic gain control12 VDC or 24 VDC operationSeparate alarm and trouble contacts

••••

6 7

mir-600 SerieS heAt deteCtorSThe MIR-600 Series Heat Detectors are attractive, durable and feature combination rate-of-rise and fixed temperature operation in both 135°F (57°C) and 200°F (93°C) temperature ratings.

Rate-of-Rise and Fixed TemperatureOne or two circuit, normally openEasy installationLow profile

••••

Visual indicationOperation testingComplimentary low profile white exterior finish

•••

mir-Cr/CF -135 SerieS heAt deteCtorSThe MIR-CR/CF-135 Series Heat Detectors are reliable, durable and feature combination rate-of-rise and fixed temperature operation in both 135°F (57°C) and 200°F (93°C) temperature ratings.

Dual Action Rate-of-Rise & Fixed TemperatureDetects Rate of Ambient temperature rise of 8°C (15°F)Complimentary white exterior finish

••

•

Easy installationDetectors operating on fixed temperatures are only available in two settings of 135°F (57°C) or 200°F (93°C)

••

heat detectors

Cr/CF-mP SerieS moiStUre ProoF heAt deteCtorSThe CR and CF-MP Series Moisture Proof Detectors are designed for hazardous locations and Moisture Proof applications. Each Moisture Proof detector is available in single or multiple circuits with open and/or closed contact configurations. The CR and CF-MP heat detectors are available in rate-of-rise and fixed temperature operation in both 135°F (57°C) and 200°F (93°C) temperature ratings.

Dual Action Rate-of-Rise & Fixed TemperatureDetectors operating on fixed temperatures are only available in two settings of 135°F (57°C) or 200°F (93°C)

••

Detects Rate of Ambient temperature rise of 8°C (15°F)Clear-anodized aluminum finish

•

•

Cr/CF-eWt SerieS eXPLoSion-ProoF heAt deteCtorSThe CR/CF-EWT series of fire alarm Heat Detectors provide reliable fire detection in areas which are classified as hazardous. They are UL/ULC listed for hazardous location Class I, Groups C and D; Class II, Groups E, F and G; Class III Weatherproof, Water-tight and Dust-tight applications covered by Special Purpose Enclosures III, IV and V.

Wire Leads/Sealed ConnectionRate-of-Rise and/or Fixed TemperatureSingle Pole - Normally Open ContactLow Profile

••••

Models available in 135°F (57°C) or 200°F (93°C)Weatherproof, water-tight and dust-tight

•

•

SerieS 500 SPeCiAL ASSembLy heAt deteCtorSThe Series 500 Special Assembly Heat Detectors are designed for use in applications requiring protection against weather, moisture (internal condensation), and explosive atmospheres. The Series 500 consist of the WPB/MPB Weather/Moisture Proof models and the EPB/MPB Explosion/Moisture Proof models.

Weather/Moisture Proof modelsExplosion/Moisture Proof modelsOne Circuit, Normally Open

•••

Models available with rate-of-rise and/or fixed temperature detection

•

8 5

4 9

FS-240 SeLeCt-A-Strobe SerieSThe FS-240 Select-A-Strobe Series features a unique candela intensity field selector switch for alternating the candela output from 15cd to 30cd (75cd on axis).

Strobe with two field selectable settings of 15/75 or 30/120cdAll models mount to 4 inch square, single gang, double gang or octagon backbox

•

•

Available in red or white housingUniversal mounting plate included with each unitSelect models available in 110cd

••

•

FhS-240 SeLeCt-A-horn/Strobe SerieSThe FHS-240 Select-A-Horn/Strobe Series features a unique candela intensity field selector switch for alternating the candela output from 15cd to 30cd (75cd on axis). The Horn provides two different field selectable tones, and a High/Low output setting that can be achieved with the use of mini jumpers located on the back of the unit.

Universal mounting plate included with each unitAll models mount to 4 inch square, single gang, double gang or octagon backboxAvailable in red or white housing

•

•

•

Strobe with two field selectable settings of 15/75cd or 30/120cdTamper-proof candela selector switchSelect models available in 110cd

•

••

visual Signals

SerieS AS/Ah mULti-CAndeLA horn/StrobeSThe Series AS and AH are Multi-Candela Horn/Strobes that are designed for maximum performance, reliability and cost-effectiveness. The Series AS and AH are ideal for 2-wire applications and are available in wall and ceiling mount models.

Selectable continuous horn or temporal (Code 3)Three selectable dBA settings of 90, 95 and 99 dBA in both tones

•

•

Patented universal mounting plateWall and ceiling mount

••

SerieS nS/nh mULti-CAndeLA horn/StrobeS The Series NS and NH are designed for maximum performance, reliability and cost-effectiveness while meeting or exceeding the latest requirements of NFPA 72/ANSI 117.1/UFC and UL Standards 1971 and 464 as well as meeting ADA requirements concerning photosensitive epilepsy.

Selectable 15, 30, 75 or 110 candela strobe2 and 4-wire modelsTwo selectable tones and dB levels

•••

Patented universal mounting plate24 VDC modelsWall mount

•••

SerieS rSS StrobeS The Series RSS Strobes provide a wide range of intensities and mounting options for wall or ceiling applications. The Series RSS Strobes have a lower current draw while maintaining outstanding performance, reliability and cost effectiveness. These versatile appliances will satisfy virtually all requirements for indoor, wall or ceiling mount applications.

Wall mount multi-candela models are available with field selectable candela settings of 15/30/ 75/110cd or 135/185cdSingle candela models are available with candela settings of 15/75cd

•

•

Ceiling mount multi-candela models are available with field selectable candela settings of 15/30/75/95cd or 115/177cd

•

24 VDC with two field selectable settingsAll models mount to 4 inch square, single gang, double gang or octagon backbox

••

Universal mounting plate included with each unitAvailable in red or white housing

•

•

Fh-240 SeLeCt-A-horn SerieSThe FH-240 Select-A-Horn Series are audible signalling appliances designed for use in areas such as apartments, hotels and offices. The Horn provides two different field selectable tones, and a High/Low output setting that can be achieved with the use of mini jumpers located on the back of the unit.

24 VDC models with wide listed voltage rangeMounts into standard single gang boxSilenceable versions available High sound output for enhanced audibility (over 90 dBA at 10 ft) @ 24 VDC

••••

Silence button allows the user to silence the mini-horn for a max. of 10 minutesRed LED to indicate “active signal circuit” on silenceable versionsAvailable in red or white finish

•

•

•

mh-25 SerieS mini-hornSThe MH-25 Series Mini Horns are compact electronic alarm appliances that are ideal for alarm signalling in individual rooms, apartments, hotels and offices where attractive appearance and dependable performance are prime concerns.

Multi-candela models are available with field selectable candela settings of 15/30/75/110cd or 135/185cdSingle candela models are available with candela settings of 15/75cd

•

•

Field selectable taps for 25 or 70 VRMS operation from 1/8 to 2 wattsAvailable in red or white housingSquare wall mount speaker strobes

•

••

SerieS e50 SPeAkerS And SPeAker StrobeSThe Series E50 Speakers and Speaker/Strobes are designed for high efficiency sound output with field selectable input voltage (25/70 VRMS) and field selectable taps from 1/8 to 2 watts. These units are also designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems.

FH-45 Series feature field selectable taps from 2 to 8 wattsAvailable in 25 and 70 VRMS models

•

•

FH-47 Series feature field selectable taps from 1/4 to 2 wattsAvailable in red or white housing

•

•

Fh-45/Fh-47 SerieS SPeAkerSThe FH-45/FH-47 Series fire alarm speakers are designed to generate attention grabbing tones and voice commands for emergency signalling evacuation applications. The round and square speakers are available in red or white housing.

Audible devices

SFH-45 Series feature field selectable taps from 2 to 8 wattsSFH-47 Series feature field selectable taps from 1/4 to 2 watts

•

•

Models available with candela output of 15/75 to 30/120cd and 75 to 110cdAvailable in 25 and 70 VRMS modelsAvailable in red or white housing

•

••

SFh-45/SFh-47 SerieS SPeAker StrobeSThe SFH-45/SFH-47 Series fire alarm speaker strobes are designed to generate attention grabbing tones and voice commands for emergency signalling evacuation applications. The round and square speaker strobes are available in red or white housing.

Round ceiling mount speaker strobesMulti-candela models with field selectable candela settings of 15/30/75/95cd or 115/177cd

••

Field selectable taps for 25 or 70 VRMS operation from 1/8 to 2 wattsAvailable in red or white housing

•

•

SerieS e60 SPeAkerS And SPeAker StrobeSThe Series E60 Speakers and Speaker/Strobes are designed for high efficiency sound output with field selectable input voltage (25/70 VRMS) and field selectable taps from 1/8 to 2 watts. These units are also designed to provide a sleek, aesthetic appearance for emergency voice/alarm communications systems.

10 3

2 11

dtC-300A StAndALone digitAL CommUniCAtorThe DTC-300A Digital Alarm Communicator Transmitter/Dialer Module can connect to any Fire Alarm Control Panel with 24 VDC output power. It can transmit Alarm, Supervisory, Waterflow Alarm, Common Trouble, AC Power Trouble and Battery Trouble information on two telephone lines to a Digital Alarm Communicator Receiver (DACR).

Transmits Common Alarm, Common Supervisory, Common Waterflow Alarm, Common Trouble, AC Power Trouble and Battery Trouble information on two telephone linesProgrammable for the Ademco Contact ID and SIA-DCS protocols

•

•

Remote programming and history log retrievalTone or Pulse dialingPower and battery standby from the fire alarm control panelConnects to any 24 VDC fire alarm control panel

•••

•

bPS-SerieS nAC PoWer eXtenderSThe BPS Series are extremely cost effective voltage regulated remote NAC Power Extenders. They may be connected to any 12 or 24 Volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC) expansion (supports ADA requirements) and will provide auxiliary power to support system accessories.

Two Class A/Class B input circuitsTwo Class A/Four Class B indicating circuitsOne Aux. Power Output @ 1 Amp supply current (w/Battery Back Up)Built-in battery charger supports Lead Acid or Gel type batteries

•••

•

Horn/Strobe Sync Protocols include: Mircom/Amseco, Wheelock, Gentex, System Sensor and FaradayAvailable in 6.5, 8 and 10 Amp modelsTwo N.C. dry contact trigger inputs

•

••

mULti-voLtAge reLAy modULeSMircom offers a wide variety of multi-voltage relays modules that are suitable for use with HVAC, Temperature Control, Fire Alarm, Security, Energy Management and Lighting Control Systems.

Multi-voltage operationActivation LEDsEasy and flexible installation

•••

Reliable and robust designMulti-purpose field installation

••

eLeCtromAgnetiC door hoLderSThe Electromagnetic Door Holders are constructed of the finest materials available. Each door holder is made of durable die-cast metal and finished in a high lustre double chrome or brass plating for a high quality appearance.

Models available in surface, semi-flush and recess mountSelf-adjusting swivel catch-plate reduces installation time and adjusts to door alignment changes

•

•

Optional extension rodsBuilt-in transient protectionFloor mount units availableDual voltage inputsLow current draw

•••••

Fire Alarm Accessories

Sti StoPPer iiThe STI Stopper II is designed to protect manual pull stations or push buttons against vandalism and false fire alarms. It consists of a clear, tamper proof poly carbonate shield and frame that fit over manual pull stations. The cover is connected to the frame by a cable. When the cover is lifted it drops off of the frame and a horn will sound (models with horn).

Protection against physical damage, dust, grime and severe environmentsHelps stop false fire alarms without restricting legitimate alarms

•

•

Cover is UV-stabilized against sun deteriorationModels available with a hornWeather Stopper models available

•••

FIRE-MIR-USAREV00

a member of the

CAnAdA

25 interchange Way

vaughan (toronto), ontario

L4k 5W3

telephone: 905.660.4655

Fax: 905.660.4113

U.S.A.

60 industrial Parkway

Cheektowaga (buffalo), ny

14227

telephone: 888.660.4655

Fax: 888.660.4113

Website: www.mircom.com

email: mail@mircom.com

mirCom is the largest privately held independent designer

and manufacturer of Fire Alarm Life Safety and telephone

Access products in north America.

diStribUted by: