FINAL PROGRAM - NACE International · Industrial Fabrics, Inc. Zerust Oil and Gas NACE International ... TM0194-2014 Field Monitoring of Bacterial Growth in Oil ... Wastewater Systems

CTW2015 JW Marriott Austin

2015

September 20-24, 2015 • Austin, Texas, USA

F I N A L P R O G R A M

2 Corrosion Technology Week 2015 Final Program

JW Marriott Austin—Floor Plan

Level 3 Level 4

Level 5

September 20-24, 2015Austin, Texas, USA CTW2015

For the most up-to-date information about CTW, visit ctw.nace.org 3

Welcome to Corrosion Technology Week 2015Welcome to Corrosion Technology Week (CTW) 2015! This is the annual “work week” sponsored by the Technical Coordination Committee (TCC) of NACE In-ternational. Its purpose is to provide a series of technical committee meetings fo-cusing on various methods of identifying, preventing, and combating corrosion problems in many industries.

NACE members use these meetings to share technical knowledge about specific corrosion problems and their prevention and control, write and review proposed industry standards and technical committee reports, and plan future committee goals and activities.

While much committee work is now conducted online, CTW is still the venue that affords members a great opportunity to progress technical committee documents in a face-to-face environment and network with corrosion peers. We welcome and appreciate your participation!

Table of ContentsGeneral Information ........................................................................................................... 4

Special Events ....................................................................................................................... 5

Exhibitors................................................................................................................................ 6

NACE Technical Coordination Committee Members.............................................. 7

NACE Standards & Reports .............................................................................................. 8

Specific Technology Group (STGs) & Scopes ............................................................. 9

Technical Committee Meetings by STG.....................................................................11

CTW 2015 Meeting Charts .............................................................................................18

NACE & Technical Activities Staff Numbers ..............................................................23


General Information

NACE Office/Registration HoursThe NACE office and the CTW Registration Desk will be in rooms 303 and 304.

Date Hours

Sunday, September 20 7:30 a.m. to 6 p.m.

Monday, September 21 7:30 a.m. to 5 p.m.

Tuesday, September 22 7:30 a.m. to 5 p.m.

Wednesday, September 23 7:30 a.m. to 5 p.m.

Thursday, September 24 7:30 a.m. to 4:30 p.m.

Message BoardThe message board will be located at the NACE office in 303 and 304. To leave a message, phone the main number at the hotel (+1 512-474-4777) and ask for the NACE Office.

Meeting RoomsFor meeting room locations, please see the floorplan on page 2.

Refreshment BreaksRefreshment breaks are scheduled at 10 a.m. and 2 p.m., Monday through Thursday. Refreshments will be located in the Lone Star Ballroom Foyer.



Special Events

The CTW Opening ReceptionMonday, September 215 to 7 p.m. Lone Star South Foyer A favorite social event, this year’s Opening Reception will take place on Monday, September 21, 2015, from 5 to 7 p.m. Hors d’oeuvres, beer, wine, and soft drinks will be served. A cash bar will also be available. Join us as we kick off Corrosion Technology Week 2015!

Exhibitor Appreciation ReceptionTuesday, September 235 to 7 p.m.Lone Star South Foyer

In appreciation of our exhibitors’ continued support of CTW, attendees are invited to a second evening reception. Hors d’oeuvres, beer, wine, and soft drinks will be served. A cash bar will also be available. Enjoy this excellent opportunity to network with people in your industry and to browse through the various tabletop displays.

CORROSION TECHNOLOGY WEEK 2015 Mobile App

Minute by Minute Updates

Visit www.nace.org/mobile to download the app and keep up with all that is happening at the CTW 2015!

Download the NACE International Conferences app and search, CTW 2015


ExhibitsExhibitors at CTW provide attendees with corrosion control ideas, technical processes, and the appropriate tools for fighting corrosion. Please make sure to visit the exhibits area located in the Lone Star Ballroom Foyer.

Exhibit HoursSunday, September 20—Set Up ....... 2 p.m. to 5 p.m.

Monday, September 21 ........................ 9 a.m. to 5 p.m.

Tuesday, September 22 ........................ 9 a.m. to 5 p.m.

Wednesday, September 23 ................. 9 a.m. to noon

EXHIBITOR EXHIBITOR3M MATCOR, Inc.

ABRIOX, Inc. MESA

Accurate Corrosion Control Inc. Metal Samples

Advanced Nano Solutions MFE Rentals, Inc.

Alpha Pipeline Integrity Services MSES Consultants

ALS Oil and Gas NVI, LLC

Amcorr Products & Service VISCOTAQ OLI Systems Inc.

American Innovations Permasense Ltd.

Bass Engineering Pipeline Safety & Compliance

BGL Asset Services LLC Polyguard Products, Inc.

CTI Industries Inc. PPG Protective & Marine Coatings

Denso North America RAM-100 International, LLC

Diakont Russell Corrosion Consultants

Elecsys Corporation Seal for Life Industries

EZ Line Pipe Support Co, LLC. Sensor Networks, Inc.

GE Inspection Technologies Stress Engineering Services

GMA Garnet Group Trenton Corporation

Hill Services Triton Distribution

Industrial Fabrics, Inc. Zerust Oil and Gas

NACE International would like to thank the above Corrosion Technology Week 2015 Exhibitors for their participation.

Exhibitors

*Exhibitors as of August 7, 2015.



Look for these leaders during Corrosion Technology Week 2015!

Milan BartosProgram

Coordinator, S

Conchita MendezProgram

Coordinator, N2

Roy FultineerTechnology

Coordinator, C2

Neal Murray Technology

Coordinator, N2

Tom Weber

Past Chair, TCC

Jose VeraTechnology

Coordinator, S

Richard ThompsonTechnology

Coordinator, N1

Khlefa Esaklul

Vice Chair, TCC

Francisco Presuel-MorenoProgram

Coordinator, C1

Laszlo Forgo Program

Coordinator, C2

Drew Hevle

Chair, TCC

Nihal Obeyesekere Program

Coordinator, N1

Brian WillisTechnology

Coordinator, C1

NACE Technical Coordination Committee Members


NACE International publishes three classes of standards: standard practices, standard material requirements, and standard test methods. Until June 23, 2006, NACE published standard recommended practices, but the designation of this type of standard was changed to simply standard practice. New standards published after that date carry the new designation (SP), and existing standards are changed as they are revised or reaffirmed. Previously published standard recommended practices include the old designation below the new one, e.g., SP0592-2006 (formerly RP0592).

NEW STANDARDS

MR0175/ISO 15156: Part 3: Technical Circular 2

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production

— Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 2

NACE MR0175/ISO 15156 Addenda Package

MR0175-ISO 15156-Part 1 Technical Circular 1 (2014) Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials TECHNICAL CIRCULAR 1 MR0175-ISO 15156-Part 2 Technical Circular 2 (2014) Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons Industries. TECHNICAL CIRCULAR 2 MR0175-ISO 15156-Part 3 Technical Circular 3 (2014) Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys. TECHNICAL CIRCULAR 3 MR0175-ISO 15156-Part 3 Technical Circular 4 (2014) Petroleum and natural gas industries —Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys. TECHNICAL CIRCULAR 4

NACE SP0214-2014 Inspection, Cleaning, and Remediation Technology for Water Piping in Buildings

NACE SP0313-2013 Guided Wave Technology for Piping Applications

REVISED STANDARDS

SP0169-2013 Control of External Corrosion on Underground or Submerged Metallic Piping Systems

SP0407-2013 Format, Content, and Other Guidelines for Developing a Materials Selection Diagram

NACE SP0395-2013 (formerly RP0395) Fusion-Bonded Epoxy Coating of Steel Reinforcing Bars

SP0394-2013 (formerly RP0394) Application, Performance, and Quality Control of Plant-Applied Single-Layer Fusion-Bonded Epoxy External Pipe Coating

SP0507-2014 External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX)

TM0498-2014 Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture

TM0194-2014 Field Monitoring of Bacterial Growth in Oil and Gas Systems

TM0498-2014 Evaluation of the Carburization of Alloy Tubes Used for Ethylene Manufacture

SP0507-2014 External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX)

SP0100-2014 Cathodic Protection to Control External Corrosion of Concrete Pressure Pipelines and Mortar-Coated Steel Pipelines for Water or Waste Water Service

REPORTS and OTHER PUBLICATIONS

NACE Publication 1F192 (2013 Edition) Use of Corrosion-Resistant Alloys in Oilfield Environments

NACE Publication 08113 Corrosion Problems and Renewal Technologies in Municipal Wastewater Systems

NACE Publication 8X294 Review of Published Literature on Wet H2S Cracking of Steels Through 1989

NACE Publication 41013 State-of-the-Art Report: External Corrosion, Assessment, and Control of Buried Piping Systems in Nuclear Power Plants

NACE Publication 61114 Underdeposit Corrosion (UDC) Testing and Mitigation Methods in the Oil and Gas Industry

NACE Publication 05114 High-Voltage Direct Current Interference

New, Revised, and Reaffirmed NACE Standards & Reports



Specific Technology Groups (STGs) & ScopesFollowing is a list of all STGs with titles and scopes for your reference. For a complete list of all Task Groups and TEGs with sponsoring STGs shown, check your Technical Committees Directory (distributed at registration).

SPECIFIC TECHNOLOGY GROUP (STG) LISTING

STG # STG Name STG Scope

01 Reinforced Concrete To disseminate information on effectiveness of various corrosion protection systems for construction and rehabilitation of reinforced concrete infrastructure and methodology for its evaluation.

02 Coatings and Linings, Protec-tive: Atmospheric

Determine uses, application, and performance of coatings for atmospheric service. Atmospheric service denotes industrial and commercial equipment, architectural structures, and bridges.

03Coatings and Linings, Protec-tive: Immersion and Buried Service

Determine effectiveness, performance criteria, and quality needs of immersion coatings and lining mate-rials used in immersion service.

04 Coatings and Linings, Protective: Surface Preparation

Determine effectiveness, performance criteria, and quality needs of various methods of surface prepara-tion for the application of coatings and linings.

05 Cathodic/Anodic Protection Develop reports and standards and disseminate technology relative to cathodic and anodic protection.

06 Cleaning, Chemical and Mechanical

Develop reports and standards and disseminate technology relative to the use of chemical and mechani-cal cleaning of plant equipment.

08 Corrosion Management To promote the exchange of corrosion information resources and standards to improve corrosion life cycle management and to reduce costs.

10 Nonmetallic Materials of Construction

Develop reports and disseminate technology relative to the use of nonmetallic materials of construction as a means of corrosion control.

11 Water Treatment Development of guidance and dissemination of information related to the production and/or use of steam, water, and waste water.

30 Oil and Gas Production— Cathodic Protection

Application and evaluation of cathodic protection of all types of equipment used for oil and gas produc-tion.

31 Oil and Gas Production— Corrosion and Scale Inhibition

Application and evaluation of chemical and physical methods of corrosion control and control of related problems, such as scale, bacteria, paraffin, and hydrates, for oil and gas production environments.

32 Oil and Gas Production—Metallurgy

Evaluation and methods of selection of types of metals for all types of equipment used for oil and gas production.

33Oil and Gas Production—Nonmetallics and Wear Coat-ings (Metallic)

Evaluation and methods of proper usage of nonmetallic materials for all types of equipment used for oil and gas production.

34 Petroleum Refining and Gas Processing

Application and evaluation of methods of corrosion control and control of materials deterioration for petroleum refining and gas processing operations.

35 Pipelines, Tanks, and Well Casings

Engineering practices for the prevention and control of corrosion of pipelines and tanks in buried, immer-sion, and/or atmospheric services.

36Process Industry— Materials Performance in Chemicals

To disseminate information on materials performance in various chemical processes by documenting experience with equipment and materials, and drawing up relevant standard practices and test methods for solving industry problems.

37 Process Industry—High Temperature

To disseminate information on performance of both metallic and nonmetallic materials in specific environments where sustained temperatures of 538 °C (1,000 °F) are encountered. Document experience with equipment and materials, disseminate information on life assessment techniques, and draw up relevant standard practices and test methods for solving industry problems.

38 Process Industry—Pulp and Paper

To increase awareness of corrosion problems in the pulp, paper, and biomass conversion industries, disseminate information on the reliable and economic solutions to material and corrosion problems, obtain additional corrosion data, and encourage the use of preventive corrosion measures.


Specific Technology Groups (STGs) & Scopes

SPECIFIC TECHNOLOGY GROUP (STG) LISTING

STG # STG Name STG Scope

39Process Industries— Materials Applications and Experiences

To exchange and compile information on the experience of various metallic materials as related to properties, corrosion resistance, fabrication, weldability, repair techniques, and application in various process environments.

40 Military and Aerospace Systems and Facilities

To disseminate information and serve as a resource on identification, causes, and control of corrosion and materials degradation for military, aerospace, and electronic systems, equipment, and facilities.

41Electric Utility Generation, Transmission, and Distribu-tion

To facilitate identification and resolution of corrosion-related problems of materials in various energy generating systems—nuclear, fossil fuel, radioactive liquid storage and transfer systems, and in the utilization of geothermal resources.

43 Transportation, Land To promote the development of techniques to extend the life of land transportation equipment.

44 Marine Corrosion: Ships and Structures

To study the corrosion mechanisms, causes, effects, and corrosion control remedies for ships, struc-tures, and equipment exposed to marine environments, and to disserminate information in the form of industry standards and formal and informal technical information exchanges on the research, development, and performance of materials, coatings, and improved or innovative control methods to mitigate problems related to marine corrosion.

45Pollution Control, Waste Incineration, and Process Waste

To investigate problems, acquire service experience, exchange information, and prepare reports on the use of materials in pollution control equipment, fireside combustion systems, waste incineration facilities, coal conversion and extraction of bitumen from oil sands, and plant effluent process areas.

60 Corrosion Mechanisms Collect, assess, and disseminate information related to understanding corrosion and cracking mecha-nisms.

61 Inhibition—Corrosion and Scaling Study and disseminate information regarding the use of corrosion and scale inhibitors.

62

Corrosion Monitoring and Measurement— Science and Engineering Applications

Develop and disseminate testing and measurement procedures for corrosive environments or mate-rials in contact with those environments.

HOW CAN I JOIN A COMMITTEE?If you would like to join a Specific Technology Group (STG) or Technology Exchange Group (TEG), you may go directly to the NACE Web site and join an STG or TEG there. Or, you may call or e-mail the Technical Activities Division at NACE International (+1-281-228-6264 or e-mail [email protected]) and provide the staff with your membership number. (You must be a NACE member in good standing.)

To join an STG:http://web.nace.org/departments/technical/committeeregistration/STGRegistration.aspx

To join a TEG:http://web.nace.org/departments/technical/committeeregistration/tegregistration.aspx

If you would like to join a Task Group, you must obtain approval from the committee chair and have the chair contact NACE confirming your approval. Please feel free to talk to a member of the TCC or NACE Staff or contact Connie Gomez at [email protected] if you have any questions.



Technical Committee Meetings by STGFor convenience in reading the meeting schedule, listings have been grouped under the Administrative Specific Technology Group (STG) responsible for a particular Task Group (TG) or Technology Exchange Group (TEG). However, please note that many TGs or TEGs have several other sponsoring STGs; additional sponsoring STGs are listed in the parentheses following the TG or TEG number. You may also wish to scan the entire list of meetings that follows—there may be meetings of interest to you that are listed in different areas.

Name Committee(s) Day Time Meeting Room

Coatings and Linings, Protective: Atmospheric - STG 02

Liquid-Applied Thermal Insulative Coating for Atmospheric Service at 0 to 375ºF TEG 424X Tuesday 8 to 10 a.m. Room 310-311

Determining Insulation Value of Liquid Insula-tive Materials on Steel Surfaces 80 °F to 375 °F TG 477 Tuesday 10 a.m. to noon Room 310-311

Determining True Insulative Value of Liquid Insulative Materials Applied on Steel Surfaces TG 525 Tuesday 1:30 to 3:30 p.m. Room 310-311

Corrosion Prevention Coating of Bolt Connec-tions of Steel Structures by “CUP” TG 537 Tuesday 2 to 4 p.m. Room 305

Hot-Dip Galvanizing for Steel Corrosion Protection TEG 428X (03, 04) Tuesday 3:30 to 5 p.m. Room 307

Coating Industry Problems Confronting Own-ers and Contractors TEG 192X (01, 03, 04) Wednesday 4 to 5 p.m. Lone Star Salon F

Coatings and Linings, Protective: Atmospheric STG 02 joint with STG 03 and 04 Thursday 9 a.m. to Noon Lone Star Salon G

Coatings and Linings, Protective: Immersion and Buried Service - STG 03

Review and Revise as Necessary NACE Stan-dard RP0402-2002 TG 249 (04, 35) Monday 8:30 to 9:30 a.m. Lone Star Salon H

Coating, Polyolfin Resin Systems: Review of NACE SP0185-2007 TG 265 Monday 1 to 3 p.m. 307

Coatings Under Insulation Material Testing Procedure Recommendations: Discussion TEG 351X Monday 1:30 to 3 p.m. Lone Star Salon H

Standard Practice for Evaluating Protective Coatings for Use Under Insulation TG 516 (02, 04, 43) Monday 3 to 5 p.m. Lone Star Salon G

Review and Revise or Reaffirm SP0109-2009 TG 251 (04, 35) Tuesday 1 to 3 p.m. Room 308

State of the Art in CUI Coatings TG 425 (02, 04, 34, 36) Tuesday 1:30 to 3 p.m. Lone Star Salon H

Prequalification of Flow Efficiency Pipeline Coatings TG 490 (35) Wednesday 8 a.m. to Noon Room 307

Coatings, Polyurethane for Field Repair, Reha-bilitation, and Girth Weld Joints on Pipelines TG 281 (04, 35) Wednesday 8:30 to 9:30 a.m. Lone Star Salon H

Continued on page 12


Technical Committee Meetings by STGName Committee(s) Day Time Meeting Room

Coatings and Linings, Protective: Immersion and Buried Service - STG 03—Continued

External Pipeline Coatings: Multi-Layer Polyole-fin Coating System TG 353 Wednesday 9:30 to 11:30 a.m. Lone Star Salon H

Measurement of Protective Coating Electrical Conductance on Underground Pipelines TG 928 (05, 35, 62) Wednesday 1 to 3 p.m. Lone Star Salon H

Consequences of Coating Failures as Related to Interaction with Cathodic Protection TG 523 Wednesday 1:30 to 4:30 p.m. Room 305

Coating Conductance TG 030 (05, 35, 62) Wednesday 3 to 5 p.m. Lone Star Salon H

Coatings and Linings, Protective: Immersion and Buried Service

STG 03 joint with STG 02 and 04 Thursday 9 a.m. to Noon Lone Star Salon G

Coatings and Linings, Protective: Surface Preparation - STG 04

Soluble Salt Testing Frequency and Locations on Previously Coated Surfaces TG 518 Monday 8:30 to 10:30 a.m. Room 307

Coatings and Linings, Protective: Surface Preparation

STG 04 joint with STG 02 and 03 Thursday 9 a.m. to Noon Lone Star Salon G

Cathodic/Anodic Protection - STG 05

Steel, Structural: Corrosion Control of Pilings in Nonmarine Applications TG 018 (01, 03) Sunday 8:30 to 10:30 a.m. Room 306

Cathodic Protection and Corrosion Control Research Development TEG 016X (30, 31, 32, 35) Sunday 9 to 11:30 a.m. Lone Star Salon H

Corrosion Control Coordinating Committee TEG 022X (01) Wednesday 1 to 2 p.m. Room 307

Standard Practice for Cathodic Protection of Structures Submerged in Fresh Water TG 526 Wednesday 2 to 4 p.m. Room 307

Cathodic/Anodic Protection STG 05 joint with STG 35 Thursday 9:30 to 11:30 a.m. Lone Star Salon F

Corrosion Management - STG 08

Economics of Corrosion: Standard TG 200 Monday 3 to 5 p.m. Room 310-311

Oil and Gas Production—Cathodic Protection - STG 30

Cathodic Protection Systems, Retrofit, for Off-shore Platforms TG 168 Wednesday 8:30 to 11:30 a.m. Room 306

Offshore Steel Platforms—Corrosion Control: Review of NACE SP0176 TG 170 (05) Wednesday 1 to 3 p.m. Room 306



Technical Committee Meetings by STGName Committee(s) Day Time Meeting Room

Oil and Gas Production—Corrosion and Scale Inhibition - STG 31

Oil and Gas Production, Sour Corrosion: Infor-mation Exchange TEG 282X (60, 61, 62) Wednesday 8 a.m. to Noon Room 502-503

Flow Assurance in Oil and Gas Production: Information Exchange TEG 202X (61, 62) Wednesday 1 to 4 p.m. Room 502-503

Biocides—Oil and Gas Industry TG 075 (61) Wednesday 4 to 5 p.m. Room 502-503

Oil and Gas Production—Corrosion and Scale Inhibition STG 31 Thursday 9 to 11 a.m. Room 301

Petroleum Refining and Gas Processing - STG 34

Petroleum Refining Sulfide Stress Cracking (SSC): Review of NACE Standard MR0103 TG 231 (60) Monday 8 to 9 a.m. Lone Star Salon

B-C

Petroleum Refinery Corrosion Specialist Certi-fication TG 393 Monday 9 to 10:30 a.m. Lone Star Salon

B-C

Advisory for API 751 TG 510 Monday 10:30 to 11:30 a.m. Lone Star Salon B-C

Carbonate SCC—Update of Publication 34108 TG 347 Monday 1 to 2:30 p.m. Lone Star Salon B-C

Potential Effects of Upstream Additives on Refinery Corrosion and Fouling TG 489 (31, 35) Monday 2:30 to 4 p.m. Lone Star Salon

B-C

STG 34 Officers’ Meeting STG 34 Monday 4 to 5 p.m. Room 308

Refining State-of-the-Art Session 1: Experience with Modeling Tool and Inspection Packages/Practices

TEG 206X Tuesday 8:30 to 11:30 a.m. Lone Star Salon B-C

Refining and Gas Processing Session on New Developments TEG 207X Tuesday 1 to 2 p.m. Lone Star Salon

B-C

Refining State-of-the-Art Session 2: Carbonate Cracking Experiences and Monitoring TEG 206X Tuesday 2 to 5 p.m. Lone Star Salon

B-C

Refining Industry Information Exchange Ses-sion 1 TEG 205X Wednesday 8 a.m. to Noon Lone Star Salon

B-C

Gas Treating Control Systems Corrosion Mini-mization TEG 113X Wednesday 10:30 a.m. to Noon Lone Star Salon

B-C

Refining Industry Information Exchange Ses-sion 2 TEG 205X Wednesday 1 to 5 p.m. Lone Star Salon

B-C

Petroleum Refining and Gas Processing STG 34 Thursday 8 to 10 a.m. Lone Star Salon B-C



Pipelines, Tanks, and Well Casings - STG 35

Review and Revise as Necessary NACE SP0207-2007 TG 279 (05) Sunday 9 to 11 a.m. Room 310-311

3D Laser and Structured Light TG 502 (05) Sunday 1 to 3 p.m. Room 306

Pipelines: Liquid Petroleum Industry Corrosion Control Issues Forum TEG 314X (02, 03, 04, 05) Sunday 2 to 4 p.m. Lone Star Salon H

Review and Revise as Necessary SP0186-2007 TG 446 (05) Sunday 3 to 5 p.m. Room 306

Pipelines: In-Line Inspection TEG 267X Monday 8 to 10 a.m. Lone Star Salon F

Pipeline Corrosion Management TG 370 (02, 03, 05) Monday 8 to 10 a.m. Room 306

Review and Revise or Reaffirm as Necessary SP0208-2008 TG 315 Monday 8 to 10 a.m. Room 308

Cathodic Protection Coupon Technology TG 210 (05) Monday 10 a.m. to Noon Room 306

Pipeline Inspection: In-Line Nondestructive—Review of NACE SP0102-2010 TG 212 Monday 10 a.m. to Noon Lone Star Salon F

Review and Revise as Necessary NACE Publica-tion 35100 TG 039 Monday 1 to 3 p.m. Lone Star Salon F

Report on Underdeposit Corrosion (UDC) of Pipelines TG 533 Monday 1 to 4 p.m. Room 308

Revise or Reaffirm as Necessary SP0110-2010 TG 305 (31) Monday 2 to 5 p.m. Lone Star Salon H

Direct Assessment Methodology Application TEG 292X (05) Tuesday 8:30 to 11:30 a.m. Lone Star Salon F

State-of-the-Art Report on Flow and Corrosion Modeling TG 447 (31, 62) Tuesday 8:30 to 11:30 a.m. Lone Star Salon G

Review of NACE Standard RP0193-2001 TG 013 (05) Tuesday 1 to 3 p.m. Room 306

Pipeline Crossings: Steel-Cased, Thrust-Bored, and HDD TEG 208X (05) Tuesday 1:30 to 2:30 p.m. Lone Star Salon G

Review and Revise as Necessary NACE Stan-dard TM0212-2012 TG 254 Tuesday 3 to 4 p.m. Room 306

Pipeline Direct Assessment Methodology TG 041 Tuesday 3 to 5 p.m. Lone Star Salon G

Technical Committee Meetings by STG




Pipelines, Tanks, and Well Casings - STG 35—ContinuedTechnical Guidance for Using In-Line Inspec-tion Devices in the Direct Examination Phase of External Corrosion Direct Assessment

TG 522 (31, 41) Wednesday 9 to 10:30 a.m. Room 310-311

Microbiologically Influenced Corrosion on Ex-ternal Surfaces of Buried Pipelines: Detection, Testing, and Evaluation

TG 237 (60) Wednesday 10:30 to 11:30 a.m. Room 310-311

Steel Pipelines and Piping Systems: Internal Corrosion Control TG 038 Wednesday 1 to 3 p.m. Room 310-311

Stress Corrosion Cracking Direct Assessment, External TG 273 Wednesday 3 to 5 p.m. Room 310-311

Pipelines, Tanks, and Well Casings STG 35 joint with STG 05 Thursday 9:30 to 11:30 a.m. Lone Star Salon F

Electric Utility Generation, Transmission, and Distribution - STG 41

Materials Selection for Buried Piping in the Nuclear Industry TG 467 (03, 05, 35) Sunday 1 to 3 p.m. Room 307

Nuclear Power Plant Buried Pipe Coatings Condition Assessment TG 481 (03) Monday 8 to 10 a.m. Room 301-302

Identification of Existing Buried Pipe Coatings in Nuclear Power Plants TG 485 (03) Monday 10 a.m. to Noon Room 301-302

Nuclear Buried and Underground Piping TEG 465X (03, 05, 35) Monday 2 to 5 p.m. Room 301-302

External Cathodic Protection for Nuclear Power Plant Piping Systems TG 491 (05, 35) Tuesday 7 a.m. to Noon Room 307

Power Generation and Delivery Education Roadmap TEG 473X Tuesday 1 to 2 p.m. Room 307

Proposed NACE Standard Practice, “Atmospher-ic Above Grade Inspection and Assessment of Corrosion

TG 529 (02) Tuesday 2 to 3:30 p.m. Room 307

Electric Utility Transmission and Distribution Corrosion and Grounding: Discussion of Issues TEG 368X Wednesday 8:30 to 10:30 a.m. Lone Star Salon G

Electric Utility Generation, Transmission, and Distribution, and Substation Structures STG 41 Wednesday 1 to 4 p.m. Lone Star Salon G

Transportation, Land - STG 43

Railcars: Coating Application on Exterior Sur-faces of Steel Railcars TG 339 Tuesday 9 to 9:30 a.m. Room 301-302

Maintenance Overcoating of Railcar Exteriors TG 437 (02, 04) Tuesday 9:30 to 10 a.m. Room 301-302


Continued on page 16



Transportation, Land - STG 43 — Continued

Surface Preparation by Encapsulated Blast Me-dia for Repair of Existing Coatings on Railcars TG 379 Tuesday 10 to 10:30 a.m. Room 301-302

Review and Revise or Reaffirm as Necessary NACE SP0386-2007 TG 332 (02, 03) Tuesday 10:30 to 11 a.m. Room 301-302

Qualifying Personnel as Abrasive Blasters and Coating and Lining Applicators in the Rail Industry

TG 394 (04) Tuesday 11 to 11:30 a.m. Room 301-302

Coating Thickness Measurement, Methods, and Recording—Specific to the Railcar Indus-try

TG 456 (02, 03, 04) Tuesday 1:30 to 2:30 p.m. Room 301-302

Revision of NACE SP0592 (formerly RP0592) TG 061 (03, 36) Tuesday 2:30 to 3 p.m. Room 301-302

Review and Revise or Reaffirm as Necessary NACE SP0295-2008 TG 333 (03) Tuesday 3 to 3:30 p.m. Room 301-302

Review and Revise or Reaffirm NACE SP0302-2007 TG 067 Wednesday 9 to 10 a.m. Room 301-302

Guidelines for Data Collection and Analysis of Railroad Tank Car Interior Coating/Lining Condition

TG 444 (02, 03) Wednesday 10 to 10:30 a.m. Room 301-302

Transportation, Land STG 43 Wednesday 10:30 a.m. to Noon Room 301-302

Marine Corrosion: Ships and Structures - STG 44

Marine Vessel Corrosion TEG 181X (02) Monday 1 to 3 p.m. Room 306

Standard for Hull Roughness Measurements on Ship Hulls in Dry Dock TG 461 (03, 04) Monday 3 to 5 p.m. Room 306

Corrosion Monitoring and Measurement—Science and Engineering Applications - STG 62

Test Method for Monitoring Atmospheric Cor-rosion Rate by Electrochemical Measurements TG 530 (40, 41) Sunday 9 to 11 a.m. Room 307

Revise NACE Publication 3T199 TG 390 (11, 31) Sunday 11 a.m. to Noon Room 307




Administrative and Other MeetingsName Committee(s) Day Time Meeting Room

Administrative MeetingsTechnical Coordination Committee (TCC ) Session 1 Sunday 1:30 to 4:30 p.m. Room 310-311

TCC Operations Committee Monday 8 to 11:30 a.m. Lone Star Salon G

Education Committee Monday 10 a.m. to noon Lone Star H

Strategic Planning with Dan Adley Monday 1:30 to 4:30 p.m. Room 305

TCC Planning Committee Tuesday 8 to 11 a.m. Room 306

ACPC Symposium Training Tuesday 2 to 4 p.m. Room 401

TCC STG Officer Training Wednesday 11:30 a.m. to 1 p.m. Lone Star Salon F

TCC Reference Publications Committee (RPC) Wednesday 2 to 4 p.m. Room 301-302

Technical Coordination Committee (TCC) Session 2 Thursday Noon to 2 p.m. Room 310-311

Technical & Research Activities Committee (TRAC) Thursday 2:30 to 4:30 p.m. Room 307

Internal Corrosion Subcommittee Wednesday 9 to 11 a.m. Room 309

Other MeetingsAPI RP 934-H Cr-Mo Maintenance Monday 8 to 10 a.m. Room 502-503

API TR 934-J Coke Drum Repairs & Maintenance Monday 10 to 11 a.m. Room 502-503

Duplex Stainless Steels JIP (API) Monday 11 a.m. to Noon Room 502-503

API RP 582 Welding Monday 1 to 2:30 p.m. Room 502-503

API RP 970 Refinery Corrosion Control Document Monday 2:30 to 5 p.m. Room 502-503

API 934-A 2.25 & 3.0 CrMoV Materials & Fabrication, API 934-C, and RP 934-E Tuesday 8 to 11 a.m. Room 502-503

NACE Institute Speciality Board for Pipeline Certification Tuesday 8 to 9 a.m. Room 309

NACE Institute Specialty Board of Protective Coatings Tuesday 9 a.m. to Noon Room 305

API 934-I CrMo Inspection Tuesday 11 to 11:30 a.m. Room 502-503

API RP 571 Damage Mechanisms Tuesday 11:30 a.m. to Noon Room 502-503

API RP 934-F 2.25 & 3.0 CrMo V Reactor MPT's Tuesday 1 to 3 p.m. Room 502-503

API RP 939-C Sufidation Tuesday 3 to 5 p.m. Room 502-503

API RP 945 Amine SCC Wednesday 4 to 5:30 p.m. Room 401

API RP 941 & TR 941 High Temperature Hydrogen Attack Thursday 8 to 10 a.m. Room 502-503

API Task Group on Injected Point Practices Thursday 10 a.m. to Noon Room 502-503

API SCCM Research & Joint Meeting Thursday 1 to 3 p.m. Room 305

ISO MeetingsISO/TC 35 TAG Monday 9 to 11 a.m. Room 310-311

ISO/TC 156 TAG Monday 1 to 3 p.m. Room 310-311

Iden

tifica

tion

of th

e Co

mm

ittee

Num

bers

:

The

first

num

ber g

ives

the

com

mitt

ee d

esig

natio

n nu

mbe

r, e.

g., 1

77.

The

seco

nd n

umbe

r in

brac

kets

is th

e Ad

min

istra

tive

Spec

ific

Tech

nolo

gy G

roup

(STG

).

Exam

ple

:

177

[35]

Com

mitt

ee D

esig

natio

n

Com

mitt

ee D

esig

natio

n

Sun

day

CO

RR

OSI

ON

TEC

HN

OLO

GY

WEE

K 2

015—

AU

STIN

Sun

day

, Sep

tem

ber

20,

201

5

Ro

om

88:

309

9:30

10

10

:30

11

11:3

0 n

oo

n12

:30

1 1:

30

2 2:

30

3 3:

30

4 4:

30

5 5:

30

303-

304

NA

CE

Offi

ce a

nd R

egis

trat

ion

Lone

Sta

r Sou

th F

oyer

Exhi

bits

305

306

TG 0

18 [0

5]TG

502

[35]

TG 4

46 [3

5]

307

TG 5

30 [6

2]TG

390

[62]

TG 4

67 [4

1]

308

309

310-

311

TG 2

79 [3

5]TC

C S

essi

on 1

Lone

Sta

r Sal

on H

TEG

016

X [0

5]TE

G 3

14X

[35]


Corr

osio

n Te

chno

logy

Wee

k 20

15 M

eeti

ng C

hart

s

TCC

AD

MIN

ISTR

ATI

VE

MEE

TIN

GS

ISO

MEE

TIN

GS

AP

IN

AC

E IN

STIT

UTE

CO

MM

ITTE

E M

EETI

NG

S

Mo

nd

ay


CO

RR

OSI

ON

TEC

HN

OLO

GY

WEE

K 2

015—

AU

STIN

Mo

nd

ay, S

epte

mb

er 2

1, 2

015

Ro

om

88:

309

9:30

10

10

:30

11

11:3

0 n

oo

n12

:30

1 1:

30

2 2:

30

3 3:

30

4 4:

30

5 5:

30

303-

304

NA

CE

Offi

ce a

nd R

egis

trat

ion

Stor

age

Lone

Sta

r Sou

th F

oyer

Exhi

bits

OP

ENIN

G

REC

EPTI

ON

5-7

p.m

.

301-

302

TG 4

81 [4

1]TG

485

[41]

TEG

465

X [4

1]

305

Stra

tegi

c Pl

anni

ng w

ith D

an A

dley

306

TG 3

70 [3

5]TG

210

[35]

TEG

181

X [4

4]TG

461

[44]

307

TG 5

18 [0

4]TG

265

[03]

308

TG 3

15 [3

5]TG

533

[35]

STG

34

(Offi

cers

Mee

t-in

g)

309

310-

311

ISO

TC

35

TAG

ISO

TC

156

TA

GTG

200

[08]

401

502-

503

API

RP

934-

HA

PI T

R 93

4-J

Dup

lex

Stai

n-le

ss S

teel

s JI

PA

PI R

P 58

2A

PI R

P 97

0

Lone

Sta

r Sal

on B

-CTG

231

[34]

TG 3

93 [3

4]TG

510

[34]

TG 3

47 [3

4]TG

489

[34]

Lone

Sta

r Sal

on F

TEG

267

X [3

5]TG

212

[35]

TG 0

39 [3

5]

Lone

Sta

r Sal

on G

TCC

Op

erat

ions

Mee

ting

TEG

351

X [0

3]TG

516

[03]

Lone

Sta

r Sal

on H

TG 2

49 [0

3]Ed

ucat

ion

Com

mitt

ee M

eetin

gTG

305

[35]

TCC

AD

MIN

ISTR

ATI

VE

MEE

TIN

GS

ISO

MEE

TIN

GS

AP

IN

AC

E IN

STIT

UTE

CO

MM

ITTE

E M

EETI

NG

S

Tues

day


Corr

osio

n Te

chno

logy

Wee

k 20

15 M

eeti

ng C

hart

s

TCC

AD

MIN

ISTR

ATI

VE

MEE

TIN

GS

ISO

MEE

TIN

GS

AP

IN

AC

E IN

STIT

UTE

CO

MM

ITTE

E M

EETI

NG

S

CO

RR

OSI

ON

TEC

HN

OLO

GY

WEE

K 2

015—

AU

STIN

Tues

day

, Sep

tem

ber

22,

201

5

Ro

om

7-8

88:

309

9:30

10

10

:30

11

11:3

0 n

oo

n12

:30

1 1:

30

2 2:

30

3 3:

30

4 4:

30

5 5:

30

303-

304

NA

CE

Offi

ce a

nd R

egis

trat

ion

Lone

Sta

r Sou

th F

oyer

Exhi

bits

EXH

IBIT

OR

R

ECEP

TIO

N5-

7 p.

m.

301-

302

TG

339

[43]

TG

437

[43]

TG

379

[43]

TG 3

32

[43]

TG

394

[43]

TG 4

56 [4

3]TG

06

1 [4

3]

TG

333

[43]

305

NII

Spec

ialt

y Bo

ard

of P

rote

ctiv

e C

oatin

gsTG

537

[02]

306

TCC

Pla

nnin

g M

eetin

gTG

013

[35]

TG 2

54 [3

5]

307

TG 4

91 [4

1]TE

G 4

73X

[41]

TG 5

29 [4

1]TE

G 4

28X

[02]

308

TG 2

51 [0

3]

309

NII

Spe-

cial

ty B

oard

fo

r Pip

elin

e C

ertifi

catio

n

310-

311

TEG

424

X [0

2]TG

477

[02]

TG 5

25 [0

2]

401

AC

PC S

ymp

osiu

m T

rain

ing

502-

503

API

934

-A, R

P 93

4-C

, & R

P 93

4-E

API

RP

934-

IA

PI R

P 57

1A

PI R

P 93

4-F

API

RP

939-

C

Lone

Sta

r Sal

on B

-CTE

G 2

06X

[34]

TEG

207

X [3

4]TE

G 2

06X

[34]

Lone

Sta

r Sal

on F

TEG

292

X [3

5]

Lone

Sta

r Sal

on G

TG 4

47 [3

5]TE

G 2

08X

[35]

TG 0

41 [3

5]

Lone

Sta

r Sal

on H

TG 4

25 [0

3]


Wed

nes

day

TCC

AD

MIN

ISTR

ATI

VE

MEE

TIN

GS

ISO

MEE

TIN

GS

AP

IN

AC

E IN

STIT

UTE

CO

MM

ITTE

E M

EETI

NG

S

CO

RR

OSI

ON

TEC

HN

OLO

GY

WEE

K 2

015—

AU

STIN

Wed

nes

day

, Sep

tem

ber

23,

201

5

Ro

om

88:

309

9:30

10

10

:30

11

11:3

0 n

oo

n12

:30

1 1:

30

2 2:

30

3 3:

30

4 4:

30

5 5:

30

303-

304

NA

CE

Offi

ce a

nd R

egis

trat

ion

Lone

Sta

r Sou

th F

oyer

Exhi

bits

301-

302

TG 0

67 [4

3]TG

444

[4

3]ST

G 4

3TC

C R

PC

305

TG 5

23 [3

5]

306

TG 1

68 [3

0]TG

170

[30]

307

TG 4

90 [0

3]TE

G 0

22X

[05]

TG 5

26 [0

5]

308

309

Inte

rnal

Cor

rosi

on

Sub

com

mitt

ee

310-

311

TG 5

22 [3

5]TG

237

[35]

TG 0

38 [3

5]TG

273

[35]

401

API

RP

945

502-

503

TEG

282

X [3

1]TE

G 2

02X

[31]

TG 0

75 [3

1]

Lone

Sta

r Sal

on B

-CTE

G 2

05X

[34]

TEG

113

X [3

4]TE

G 2

05X

[34]

Lone

Sta

r Sal

on F

TCC

Offi

cer T

rain

ing

TEG

192

X [0

2]

Rap

'n R

ye

Lone

Sta

r Sal

on G

TEG

368

X [4

1]ST

G 4

1

Lone

Sta

r Sal

on H

TG 2

81 [0

3]TG

353

[03]

TG 9

28 [0

3]TG

030

[03]

Thu

rsd

ay


Corr

osio

n Te

chno

logy

Wee

k 20

15 M

eeti

ng C

hart

s

TCC

AD

MIN

ISTR

ATI

VE

MEE

TIN

GS

ISO

MEE

TIN

GS

AP

IN

AC

E IN

STIT

UTE

CO

MM

ITTE

E M

EETI

NG

S

CO

RR

OSI

ON

TEC

HN

OLO

GY

WEE

K 2

015—

AU

STIN

Thu

rsd

ay, S

epte

mb

er 2

4, 2

015

Ro

om

88:

309

9:30

10

10

:30

11

11:3

0 n

oo

n12

:30

1 1:

30

2 2:

30

3 3:

30

4 4:

30

5 5:

30

303-

304

NA

CE

Offi

ce a

nd R

egis

trat

ion

Lone

Sta

r Sou

th F

oyer

Exhi

bits

301-

302

STG

31

305

306

307

TRA

C

308

309

310-

311

TCC

Ses

sion

2

401

Keep

Op

en

502-

503

API

RP

941

& T

R 94

1A

PI T

G o

n In

ject

ion

Poin

t Pra

ctic

esA

PI S

CCM

Res

earc

h &

Joi

nt

Lone

Sta

r Sal

on B

-CST

G 3

4

Lone

Sta

r Sal

on F

STG

05/

35

Lone

Sta

r Sal

on G

STG

02/

03/0

4

Lone

Sta

r Sal

on H



NACE and Technical Activities Staff Numbers

Acknowledgments

Main Phone: .............................................................................. +1 281-228-6200FirstService: .............................................................................. +1 281-228-6223

CaLae McDermott, Senior Manager Conferences & EventsPhone: ............................................................................................. +1 281-228-6263e-mail: ......................................................................calae.mcdermott@nace.org

Lesley Martinez, Conference Program Senior SpecialistPhone: ............................................................................................. +1 281-228-6413e-mail: ...........................................................................lesley.martinez@nace.org

TECHNICAL ACTIVITIES

Linda Goldberg, Director, Technical ActivitiesPhone: ............................................................................................. +1 281-228-6221e-mail: ...........................................................................linda.goldberg@nace.org

Trudy Schreiner, Standards Editor/Liaison, Technical Activities Phone: ............................................................................................. +1 281-228-6208e-mail: ......................................................................... [email protected]

NACE International would like to thank the following Corrosion Technology Week 2015 Sponsors* for their participation.

If your company would like to be a sponsor or an exhibitor at CTW 2016 in Houston, Texas, please contact Exhibit Sales at:

NACE InternationalAttn: Diane Gross, Sales Manager

15385 Park Ten Place, Houston, Texas 77084-4906Phone: +1-281-228-6446 • E-mail: [email protected]

NACE International would like to thank all Corrosion Technology Week attendees for their support.

We hope to see you next year at Corrosion Technology Week 2016 in Houston, Texas, USA, September 25-29, 2016.

Ed Barrett, Strategic Standards Developer, Technical ActivitiesPhone: ........................................................................................... +1 281-228-6295e-mail: ......................................................................................ed.barrett@nace.org

Rick Southard, Senior Editor, Technical ActivitiesPhone: ........................................................................................... +1 281-228-6485e-mail: ...............................................................................rick.southard@nace.org

Connie Gomez, Committee Coordinator, Technical Activities Phone: ........................................................................................... +1 281-228-6264e-mail: ............................................................................connie.gomez@nace.org

Everett Bradshaw, Manager, Technical Activities Phone: ........................................................................................... +1 281-228-6203e-mail: ....................................................................everett.bradshaw@nace.org

GMA GARNET GROUPwhen your abrasive matters!

*Sponsors as of August 07, 2015.

CTW2016 Royal Sonesta Houston

2016

September 25-29, 2016 • Houston, Texas, USA

Documents

FINAL PROGRAM - NACE International · Industrial Fabrics, Inc. Zerust Oil and Gas NACE International ... TM0194-2014 Field Monitoring of Bacterial Growth in Oil ... Wastewater Systems