Filters and Combiners

FILTERS & COMBINERS

Broadcasting Products #07

Exir Broadcasting P +46 415 164 00 F +46 415 166 01 [email protected] www.exirbroadcasting.com4

Exir Broadcasting P +46 415 164 00 F +46 415 166 01 [email protected] www.exirbroadcasting.com 5

Introduction and General Inform

ationFilters

Combiners

Order and Sales Inform

ation

TYPICAL VALUESThe specifications herein represent typi-cal values unless otherwise indicated. Selected filter and combiner models can be sharp tuned to meet customer requirements. Please contact Exir Broad-casting for more information.

POWER LEVELSMaximum input power for selected filter and combiner models can be modified to meet customer requirements. Some combiner models can be equipped with various couplers, enabling higher input power. Please contact Exir Broadcasting for more information.

CONNECTIONSSeveral products in this catalogue are available with optional connections as indicated in the specifications. In ad-dition, we offer a wide range of high quality adapters in a variety of sizes to suit any application – please refer to our catalogue for Rigid Line, Accessories & Measurement Equipment or contact Exir Broadcasting for more information.

BAND III AND BAND IV-V TV PRODUCTS While all of the TV filters and combiners in this catalogue are available with 6, 7 or 8 MHz bandwidth, the specifications pro-vided herein refer to measurements per-formed at 8 MHz unless otherwise stated. To receive additional product sheets or specifications for these products when us-ing 6 or 7 MHz bandwidth, please contact Exir Broadcasting for more information.

SPECIAL REQUIREMENTS AND SOLUTIONSThis catalogue encompasses a large se-lection of standard broadcasting products from Exir Broadcasting. Many situations, however, call for special system configu-rations due to the singular demands of specific broadcasting applications.

At Exir Broadcasting our knowledgeable staff is accustomed to helping custom-ers find the best possible solutions to meet their particular needs, no matter what the situation may be. So please do not hesitate to contact us to discuss any special requirements you may have.

Table of Contents

CONTENTS

Flexible Design Allows Individual System Solutions 4

Filters 8

Combiners 46

Order and Sales Information 97

While all efforts have been made to provide accurate specifications at time of

printing, Exir Broadcasting is not responsible for any errors or omissions in this

catalogue. All specifications are subject to change without prior notice and nei-

ther Exir Broadcasting nor its employees may be held responsible for discrepancies

between the printed specifications and those actually in effect at any given time.

For actual specifications please contact Exir Broadcasting for more information.

© Exir Broadcasting & Telecom AB, Sweden

All rights reserved

2012 Exir Broadcasting & Telecom AB


Flexible Design Allows Individual System Solutions At Exir Broadcasting we build flexibility into all of our stan-dard products making them fully adaptable for virtually any situation.

Our long history at the cutting edge of RF design guarantees our customers

optimal solutions. These pages showcase some of the many individual solutions

we have delivered over the years featuring standard components assembled as

complete combiner systems. Customers can order standard products either as

separate components or integrated into complete combiner systems for unique

stations. Furthermore, on-site installation is always just a matter of a few simple

connections in order to begin broadcasting.

Four FM combiners in a dual chain with wideband splitter

Four dual FM combiners for up to 20 kW each and a broadband input U-link splitter located at the beginning of the chain. Two UHF combiners for combined analogue and digital services

Two UHF combiners for up to 5 kW at each narrowband input. The broadband input is opti-mized for existing analogue services. The narrowband input is equipped with a matching section and the output with a directional coupler section.

Seven high power FM combiners in a chain

This 7-channel FM combiner system is optimized for seven 10 kW transmitters with a mini-

mum frequency spacing at 800 kHz. The larger combiner at the end of the chain can handle up to 50 kW on the narrowband input port and 150 kW on the output port. Four DMB combiners in a dual chain

Combiner system designed as a dual chain configuration with a 3-port patch panel on each narrowband input for narrow-band switching. Each combiner can handle up to 4 kW DAB/DMB service on the narrowband input and up to 30 kW on the output port. Two UHF waveguide combiners with integrated patch panel system

Designed for handling three analogue 10 kW services, this system is customized using mul-

tiple patch panels. This allows transmitter switching between the combiner system, or to a station power load. Direct feed-ing of a transmitter to the an-tenna is possible and also inte-grated antenna switching panel, a power meter makes it possible to monitor the powers from the directionally couplers.

Four UHF combiners with by-pass patch panel and Antenna Switching Frame unit

Four UHF combiners assembled in a 19” frame solution for nar-rowband input power of up to 3 kW. 4-port patch panels make it possible to bypass any com-biner unit in the system. A 7-port Antenna Switching Frame unit splits the power up to either the antenna or a station power load.

2

1

6

4

53



ationFilters

Combiners


ation

1

3

5

2

4

6



ationFilters

Combiners


ation

Filters CONTENTS

Introduction

BAND II POWER

FM Bandpass filter, 3 Pole 500 W

FM Bandpass filter, 3 Pole 2 kW

FM Bandpass filter, 3 Pole 2.5 kW




BAND III POWER

DAB Bandpass filter, 6 Pole 1 kW

DAB Bandpass filter, 6 Pole 2 kW

VHF Bandpass filter, 6 Pole, 2 External Notches 7 MHz 2 kW

VHF Bandpass filter, 6 Pole 4 kW

BAND IV-V POWER

UHF Bandpass filter, 3 and 4 Pole 50 W

UHF Bandpass filter, 4 Pole 650 W



UHF Bandpass filter, 4 Pole 3.3 kW

UHF Bandpass filter, 6 Pole 3 kW

UHF Bandpass filter, 8 Pole 2.7 kW




UHF Bandpass filter, 3 Cavities 12 and 15 kW



Low Pass filter, UHF Harmonic Rejection Filter


FiltersWhether you require traditional analogue products or new digital tech-nology, we offer widely proven, cost-effective solutions. In addition Exir Broadcasting provides custom engineering to meet individual needs and client specifications.

All Exir Broadcasting´s filters meet demanding quality

standards, providing superior reliability, performance

and stability for years of trouble-free operation. Each

filter or system is 100% factory tested, and a copy

of the test data is supplied with every shipment. Well

tuned to the ongoing development of digital technol-

FM Filters

DAB/DMB Filters

Exir Broadcasting FM filters cover the range from 87.5-108 MHz and have

input powers ranging from 500 W to 33 kW. All of the filters are FM band

tunable and convection cooled. These well-proven designs have been used

in hundreds of stations using either 2 or 3 Pole notch filters or band pass

techniques. The fully adjustable input and output coupling provide supe-

rior tuning and performance over the entire FM band. The notch filters use

an all-copper construction providing low loss with high notch depth. The

bandpass filters use an aluminium construction with copper or aluminium

resonator for stable high power performance.

Exir Broadcasting is providing filters with up to 8 Pole

to meet the strict requirements of both the critical and

non-critical masks. Full compliance with the Eureka

147 international specification is achieved at DAB /

DMB (174 - 240 MHz) and L Band (1452 -1492 MHz)

frequencies at powers ranging from 500 W to 2 kW.

All Exir Broadcasting filters are DAB/DMB band tun-

able, temperature compensated and convection cooled.

ogy, Exir Broadcasting continues to lead the way with

its broad range of compact filters designed to meet

worldwide digital standards and specifications. We are

proud to say that these filters continue to play a signifi-

cant role in many new networks and systems, providing

exceptional reliability and customer satisfaction.

Repetitive Pole design ensures a minimum component

count, high reliability and ease of tuning all in a compact

package for space saving systems. The bandpass filters

use an aluminium construction with copper or aluminium

resonator for stable high power performance.



ationFilters

Combiners


ation

VHF Filters

UHF Analogue and Digital Filters

Our products for the 174-240 MHz Band III

frequency range incorporate the same design

principles used with our other filter products:

welded aluminium casings, the elimination of

contact springs, and the use of copper or alu-

minium resonators to achieve stable, high-power

performance. These filters are both tunable and

temperature compensated, and our most capable

model can handle up to 7 kW of rms input power.

These combined features provide broadcast-

ers with the familiar low loss, high rejection and

temperature stability associated with all of our

filter products.

This exciting range of Exir Broadcasting filters offers tried

and tested performance for traditional analogue and digital

services with the advantages in many filters of a UHF band

tunable coaxial design and the low losses associated with

seamless Pole and the silver-plating of key components.

The range of filters offers options in band pass and notch

configurations of up to 8 Pole. Fully adjustable input, output

and cross-couplings provide superior rejection character-

istics to meet all standards. The welded aluminium case

provides a robust platform for a family of filters with input

powers of up to 15 kW. This filter series complements our

higher power triple-mode and single-mode waveguide

filters to provide solutions for all your TV applications.

These filters employ a trademark tuner design that does

not require contact spring fingers. This technique greatly

increases the reliability of the filter and at the same time

compensates for any temperature variation within the filter.


FM Bandpass filter500 W, 3 Pole

PRODUCT FEATURES

�� Flexible and compact

�� Retunable

�� 10-year comprehensive warranty

PRODUCT PROFILE

High power temperature stabilized FM filters with 3

Pole, capable to handling power up to 500 W. Used

as a reflective band pass filter or as part of a channel

combiner, they provide channel isolation for chan-

nels as close as 2 MHz. FM band tunable and simple

tuning along with a tuner design that does not use

spring fingers ensures a solid reliableproduct for

years of broadcast service.

ARTICLE BPF2-3C06-A001

FREQUENCY 87 - 108 MHz

MAX INPUT POWER 500 W

IMPEDANCE 50 Ohm

VSWR <1.05 (>32 dB)

INSERTION LOSS

Centre frequency <0.7 dB

BANDWIDTH

±200 kHz <0.8 dB

STANDARD CONNECTION 7/16 f/m

OPTIONAL CONNECTIONS 1 5/8” unflange or 7/8” flange

DIMENSIONS AND WEIGHT

DIMENSIONS 887 x 204 x 68 mm

L x W x H (35 x 8 x 2.7 in)

WEIGHT ~15 kg (33 lb)

Insertion loss and Return loss (dotted)

All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation.

Data in table is typical .

BAND II BAND IV BAND IV-V BAND L BAND V+ BAND IV+


BAND III

BAND III



ationFilters

Combiners


ation

PRODUCT FEATURES


�� Retunable


�� Temperature compensated

PRODUCT PROFILE


Pole, capable to handling power up to 2 kW. Used as

a reflective band pass filter or as part of a channel


nels as close as 800 kHz. FM band tunable and sim-

ple tuning along with a tuner design that does not

use spring fingers ensures a solid reliableproduct for


FM Bandpass filter2 kW, 3 Pole

ARTICLE BPF2-3C11-A001 BPF2-3C11-A002

FREQUENCY 87 - 108 MHz 87 - 108 MHz

MAX INPUT POWER 2 kW 1.25 kW

IMPEDANCE 50 Ohm 50 Ohm

VSWR <1.05 (>32 dB) <1.05 (>32 dB)

INSERTION LOSS

Centre frequency <0.35 dB <0.95 dB

BANDWIDTH

±200 kHz <0.45 dB <1.2 dB

STANDARD CONNECTION 1 5/8” unflange 1 5/8” unflange

OPTIONAL CONNECTIONS 7/16 f/m or 7/8” flange 7/16 f/m or 7/8” flange


DIMENSIONS 887 x 324 x 108 mm 887 x 324 x 108 mm

L x W x H (35 x 12.7 x 4.25 in) (35 x 12.7 x 4.25 in)

WEIGHT 25 kg (55 lb) 25 kg (55 lb)

Sharp tuned and tem-perature compensated



Data in tables is typical. The filter can be tuned for other specifica-tions or bandwidths, please contact us for a specification designed for your requirements.

Revision B



BAND III

BAND III


PRODUCT FEATURES


�� Retunable



PRODUCT PROFILE


Pole, capable to handling power up to 2.5 kW. Used







FM Bandpass filter2.5 kW, 3 Pole

ARTICLE BPF2-3C11-A001P BPF2-3C11-A002P


MAX INPUT POWER 2.5 kW 1.5 kW


VSWR <1.05 (>32 dB) <1.05 (>32 dB)

INSERTION LOSS


BANDWIDTH

±200 kHz <0.45 dB <1.2 dB


OPTIONAL CONNECTIONS 7/16 f/m or 7/8” flange 7/16 f/m or 7/8” flange



L x W x H (35 x 12.7 x 4.25 in) (35 x 12.7 x 4.25 in)

WEIGHT 25 kg (55 lb) 25 kg (55 lb)

Sharp tuned and temperature compensated




Revision A



BAND III

BAND III



ationFilters

Combiners


ation


PRODUCT FEATURES

�� Flexible design


�� Retunable 87 - 108 MHz


PRODUCT PROFILE


Pole, capable to handling power up to 8 kW. Used as

a reflective band pass filter or as part of a channel





years of broadcast service..

ARTICLE BPF2-3C20-AA00


MAX INPUT POWER 8 kW 5.5 kW


VSWR <1.07 (>30 dB) <1.07 (>30 dB)

INSERTION LOSS


± 200 kHz <0.24 dB <0.37 dB

INPUT CONNECTION 3 1/8” unflange 3 1/8” unflange

OUTPUT CONNECTION 3 1/8” unflange 3 1/8” unflange



L x W x H (37.4 x 11.4 x 23.6 in) (37.4 x 11.4 x 23.6 in)

WEIGHT 55 kg (121.3 lb) 55 kg (121.3 lb)

All average power values and technical data refer to an ambient temperature of + 20 °C with normal air flow. The product will have a maximum surface temperature of + 70 °C. Maximum power capacitymay be lower depending on channel allocation.


Revision A



BAND III

BAND III


PRODUCT FEATURES


�� Low insertion loss




PRODUCT PROFILE


Pole, capable to handling power up to 23 kW. Used






years of broadcast service..




MAX INPUT POWER 23 kW 14 kW


VSWR <1.07 (>30 dB) <1.07 (>30 dB)

INSERTION LOSS


± 200 kHz <0.15 dB <0.24 dB

STANDARD INPUT CONNECTION 3 1/8” unflange 3 1/8” unflange

OPTIONAL INPUT CONNECTION 4 1/2” unflange 4 1/2” unflange



L x W x H (35.4 x 16.1 x 36.2 in) (35.4 x 16.1 x 36.2 in)

WEIGHT ~70 kg (154.3 lb) ~70 kg (154.3 lb)

Standard tuned Sharp tuned

All average power values and technical data refer to an ambient temperature of + 20 °C with normal air flow. The product will have a maximum surface temperature of + 70 °C. Maximum power capacity may be lower depending on channel allocation.




BAND III

BAND III

Revision A



ationFilters

Combiners


ation


PRODUCT FEATURES

�� High power filter

�� Temperature stabilized

�� Retunable


PRODUCT PROFILE


Pole, capable to handling power up to 33 kW. Used







ARTICLE BPF2-3C53-AA00 BPF2-3C53-AB00 BPF2-3C53-AC00 BPF2-3C53-AD00

FREQUENCY 87-108 MHz 87-108 MH 87-108 MHz 87-108 MHz

MAX INPUT POWER 33 kW 33 kW 25 kW 25 kW

IMPEDANCE 50 Ohm 50 Ohm 50 Ohm 50 Ohm

VSWR <1.05 (>32 dB) <1.05 (>32 dB) <1.05 (>32 dB) <1.05 (>32 dB)

INSERTION LOSS

Centre frequency 0,1 dB 0,1 dB 0,1 dB 0,1 dB

BANDWIDTH

± 200 kHz 0,1 dB 0,1 dB 0,1 dB 0,1 dB

STANDARD CONNECTION RL98 unflange 1 x RL98 unflange and 1 x 6 1/8” unflange

RL98 unflange 1 x RL98 unflange and 1 x 6 1/8” unflange


DIMENSIONS 919 x 622 x 1632 mm 919 x 622 x 1632 mm 919 x 622 x 1632 mm 919 x 622 x 1632 mm

L x W x H (36.2 x 24.5 x 64.3 in) (36.2 x 24.5 x 64.3 in) (36.2 x 24.5 x 64.3 in) (36.2 x 24.5 x 64.3 in)

WEIGHT 250 kg ( 551 lb) 250 kg ( 551 lb) 250 kg ( 551 lb) 250 kg ( 551 lb)

Aluminium resonators Aluminium resonators





BAND III

BAND III


DAB/DMB Bandpass filter1 kW rms, 6 Pole

ARTICLE BPF3-6C14-AA00 (With notch)


MAXIMUM INPUT POWER 1 kW rms

IMPEDANCE 50 Ohm

VSWR <1.1 (>26 dB)*

INSERTION LOSS


±0.77 MHz <2.0 dB

±0.97 MHz >20 dB

±1.75 MHz >44 dB

±3.00 MHz >72 dB

STANDARD CONNECTION 1 5/8” unflange

OPTIONAL CONNECTIONS 7/8” flange or 7/16 f/m


DIMENSIONS 550 - 670 x 1165 x 212 mm

L x W x H (21.6 - 26.4 x 45.9 x 8.3 in)

WEIGHT 43 kg (94.8 lb)

PRODUCT FEATURES

�� Two physical notches


�� Extremely stable



�� Retunable


PRODUCT PROFILE

This filter is developed to meet the critical specifi-

cations when combining adjacent DAB blocks. The

rigid aluminium case, temperature compensation

and broadband design have significant advantages

over our competition.

Insertion loss (blue) and Return loss (green)


* average over ch bandwidth.

Data in table is typical according to a standard tuned DAB/DMB channel bandwidth. The filter can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements.



BAND III

BAND III



ationFilters

Combiners


ation

PRODUCT FEATURES

�� Two physical notches





�� 2 physical notches

�� Retunable


PRODUCT PROFILE

This filter is developed to meet the critical specifi-

cations that apply when combining adjacent DAB

blocks. A winning combination of broadband design,

temperature compensation and sturdy aluminium

case, provides significant advantages over our com-

petition. The filter is fully tunable over the DAB fre-

quency range (Band III), and contains a total of eight

Pole, two of which function as physical notches for

achieving exceptionally sharp filtering. This makes

the filter very well suited for applications involving

the combining of adjacent DAB channels.

DAB/DMB Bandpass filter2 kW rms, 6 Pole

ARTICLE BPF3-6C20-AB00



IMPEDANCE 50 Ohm

VSWR <1.1 (>26 dB)

INSERTION LOSS Centre frequency <1.0 dB

±0.77 MHz <1.8 dB

±0.97 MHz >20 dB

±1.75 MHz >44 dB

±3.00 MHz >70 dB


OPTIONAL CONNECTIONS 1 5/8” unflange


DIMENSIONS 831 x 521 x 535-585 mm

L x W x H (32.7 x 17 x 21-23 in)


Insertion loss (red) and Return loss (blue)





BAND III

BAND III


0

5

10

15

20

25

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Tem

pera

ture

rise

[°C

/kW

]

Attenuation [dB]

Temperature rise / Avg. attenuation BPF3-6C14-XXXX / BPF36C14X-XXXX

VHF Bandpass filter2 kW rms, 6 Pole, 2 external notchesOptional: 1 cross coupling and 2 external notches

SPECIFICATIONS 140 mm Series Option


BANDWIDTH 6 - 8 MHz

STANDARD ORDER 6 poles, 2 external notches

6 poles, 1 cross coupling, 2 external notches

ATV Spurious supress -

STANDARD DVB Critical mask Non critical mask

ATSC Stringent mask Non stringent mask

ISDB Critical mask Non critical mask

IMPEDANCE 50 Ohm

VSWR >20 dB (<1.22) >24 dB (<1.13)

TEMPERATURE STABILITY < 3 kHz / ˚C

MAX PRODUCT TEMPERATURE 70 ˚C

ENVIROMENTAL CONDITION -5 to 70 ˚C IP40

CONNECTIONS 1 5/8” DIN 7/16, 7/8”, angle 1 5/8"

TYPICAL DATA* 8 MHz DVB-T 7 MHz DVB-T 6 MHz ATSC

ARTICLE NO BPF3-6C14-AB/AC/AE00 BPF3-6C14-AB/AC/AE00 BPF36C14B-2P11

INSERTION LOSS

Avg. signal bandwidth <0.30 dB <0.33 dB <0.27 dB

Centre frequency <0.20 dB <0.23 dB <0.22 dB

Signal band edge ± 3.8 MHz <1.7 dB ± 3.33 MHz <2 dB ± 2.69 MHz <0.50 dB

± 3.9 MHz <3.3 dB ± 3.7 MHz >12 dB ± 3.25 MHz >2 dB

± 4.2 MHz >12 dB ± 5.25 MHz >28 dB ± 3.5 MHz >20 dB

± 6 MHz >26 dB ± 10.5 MHz >56 dB ± 6 MHz >29 dB

± 12 MHz >60 dB ± 11.75 MHz >57 dB ± 9 MHz >63 dB

± 13.85 MHz >57 dB

GROUP DELAY <470 ns <470 ns <370 ns

MAX INPUT POWER RATING** 2000 W / 13 dB (crest factor) 2000 W / 13 dB (crest factor) 2000 W / 11 dB (crest factor)

TEMPERATURE RISE <14 °C / kW <15 °C / kW <12 °C / kW

MASK COMPLIANT Critical mask Critical mask Stringent mask

Revision C


DIMENSIONS 550 - 670 x 1165 x 207 mm

L x W x H (21.6 - 26.4 x 45.9 x 8.1 in)

WEIGHT 43 kg (95 lb)

STANDARD FRAME Stand alone

OPTIONAL FRAME 19” subrack

COLOUR Frosted black

Temperature rise / Avg. attenuationBPF3-6C14-XXXX / BPF36C14X-XXXX

Attenuation & Return lossBPF3-6C14-AB/AC/AE00

* Data in table is typical data at 200 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The filter can be tuned for other specifications or bandwidth. Please contact us for a designed specification.** Max input power at <50 °C temprice at max frequency

ARTICLE: BPF3-6C14-AB00

BPF = Filter type3 = Frequency band

6 = Number of polesC = Cavity based14 = Cavity size

A = VersionB = Version0 = Version 0 = Version

ARTICLE: BPF3-6C14-B2N11



B = Version2 = Number of crosscouplingN = Coating1 = Input connection1 = Output connection



BAND III

BAND III

BAND IV-V

SPECIFICATIONS 50 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -ORDER 6 Poles double cross

coupling6 Poles with or without single cross coupling

ATV Spurious supress -DVB Non critical mask -ATSC Stringent mask -ISDB Non critical mask -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX OPERATING TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 7/16 female (standard)

7/16-m, N-f/m, EIA 7/8"-f/m

DIMENSIONS ( L X W X H ) 214x122x220-285 mm -(Inch) (8.4x4.8x8.7-11.2 in) -WEIGHT 4.6 kg (10.1 lb) -FRAME Stand alone 19" subrackCOLOUR Frosted black -

TYPICAL DATA ** 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSCART. NO. BPF4-6C05-2CN0 BPF4-6C05-2CN0 BPF4-6C05-2CN0INSERTION LOSSAvg. signal bandwidth <0.7 dB <0.8 dB <0.9 dBCenter frequency <0.55 dB <0.65 dB <0.8 dBSignal band edge ± 3.8 MHz <1.5 dB ± 2.79 MHz <1.25 dB ± 2.69 MHz <1.15 dB

± 4.2 MHz >5.0 dB ± 3.15 MHz >1.9 dB ± 3.5 MHz >2.0 dB± 6.0 MHz >16 dB ± 4.5 MHz >17 dB ± 6 MHz >29 dB± 12.0 MHz >41 dB ± 9.0 MHz >47 dB ± 9 MHz >63 dB

GROUP DELAY <210 ns <85 ns <75 nsMAX INPUT POWER RATING * 650 W / 13 dB (crest factor) 550 W / 13 dB (crest factor) 500 W / 13 dB (crest factor)TEMPERATURE RISE <7,0 °C / 100 W <7,5 °C / 100 W <8,5 °C / 100 WMASK COMPLIANT Non critical mask Non critical mask Stringent mask

UHF Bandpass filter650 W rms 6 poles

* Max input power at < 50 °C temprice at max frequency

Temperature rise / Avg. attenuation

0

2

4

6

8

10

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-6C05-XXNXAttenuation & Return loss

-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12

Deviation from centre frequency, [MHz]At

tenu

atio

n, [d

B]

BPF4-6C05-2CNX BPF4-6C05-2CNX

Exir Broadcasting P +46 415 164 00 F +46 415 164 00 [email protected] www.exirbroadcasting.com



ationFilters

Combiners


ation

ARTICLE: BPF3-6C14-B2N11



B = Version2 = Number of crosscouplingN = Coating1 = Input connection1 = Output connection

VHF Bandpass filter4 kW rms, 6 Pole

PRODUCT FEATURES

�� Avilable with Cross-coupling

�� Compact design




�� Retunable


PRODUCT PROFILE

This VHF filter from Exir Broadcasting meets the

demands from broadcasters for low loss, high re-

jection and temperature stability. Combining all

the best features of various technologies we have

developed a compact unit with increased reliability

and performance as well as plenty of flexibility for

multi-function operations.




IMPEDANCE 50 Ohm

VSWR <1.15

INSERTION LOSS No Cross-coupling Cross-coupling


±3.8 MHz <0.35 dB <0.2 dB

±4.2 MHz >1 dB >1.3 dB

±6.0 MHz >24 dB >16.6 dB

±12.0 MHz >65 dB >26 dB


OPTIONAL CONNECTIONS 1 5/8” unflange



L x W x H (26 x 17 x 19-23 in)


Insertion loss (red) and Return loss (blue)


Data in table is typical according to a standard tuned 8 MHz chan-nel bandwidth. The filter can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements.



BAND III

BAND III


UHF Bandpass filter50 W rms , 3 Pole and 4 Pole

ARTICLE BPF4-3C04-AA00 BPF4-4C04-AA00


MAXIMUM INPUT POWER 50 W rms 50 W rms


VSWR <1.1 (>26 dB) <1.1 (>26 dB)

INSERTION LOSS


± 3.8 MHz <0.5 dB <0.9 dB

± 4.2 MHz >0.6 dB >1.0 dB

± 6.0 MHz >1.1 dB >5.0 dB

± 12.0 MHz >12.0 dB >28.0 dB

± 20.0 MHz >25.0 dB >45.0 dB

STANDARD CONNECTION N female N female


DIMENSIONS 218 x 43.3 x 130 mm 218 x 43.3 x 130 mm

L x W x H (8.6 x 1.7 x 5.1 in) (9 x 2 x 5 in)

WEIGHT ~1.3 kg (2.9 lb) ~1.6 kg (3.5 lb)

PRODUCT FEATURES

�� Retunable

�� Small size


�� Optional 19” panel available

�� Adjustable bandwidth for 6, 7 or 8 MHz


PRODUCT PROFILE

Built with special space-saving techniques and

combining many of the best elements from vari-

ous technologies, this filter meets the demands of

broadcasters today where space is a cost and chan-

nel change is a demand. The filter is very easy to

retune, small, compact and allows for easy mount-

ing in a 19” rack, either separately or as part of a

compact combiner system.

TERACOM Components

Bandpassfilter 3-poles, 470 - 860 MHz 50W

BPF4-3C04-AA00 typical data 8 MHz BW

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-15,00 -13,00 -11,00 -9,00 -7,00 -5,00 -3,00 -1,00 1,00 3,00 5,00 7,00 9,00 11,00 13,00 15,00

Deviation from centre frequency , MHz

Att

enuati

on 5

dB /

div

Insertion loss (red) and return loss (blue)



3-pole filter

Revision A



BAND III

BAND III



ationFilters

Combiners


ation

UHF Bandpass filter650 W rms, 4 Pole

SPECIFICATIONS 50 mm Series


BANDWIDTH 6 - 8 MHz

STANDARD ORDER 4 Poles

OPTIONAL ORDER 4 Poles single cross coupling

ATV Spurious supress

DVB Spurious supress

ATSC Non stringent mask

ISDB Spurious supress

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)




STANDARD CONNECTION 7/16 female

OPTIONAL CONNECTIONS 7/16 m, N-f/m, 7/8” unflanged



BAND III

BAND III

TYPICAL DATA* 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSC

ARTICLE NO BPF4-4C05-0NAA BPF4-4C05-0NAA BPF4-4C05-0NAA

INSERTION LOSS



Signal band edge ± 3.8 MHz <0.5 dB ± 2.79 MHz <0.65 dB ± 2.69 MHz <0.55 dB

± 4.2 MHz >0.5 dB ± 3.15 MHz >0.60 dB ± 3.5 MHz >0.60 dB


± 12.0 MHz >28 dB ± 9.0 MHz >28.0 dB ± 9.0 MHz >24.0 dB



TEMPERATURE RISE <6.0 °C / 100 W <8.0 °C / 100 W <7.0 °C / 100 W

MASK COMPLIANT Spurious supress Spurious supress Non stringent mask

Revision B

Temperature rise / Avg. attenuation BPF4-4C05-XXXX

BAND IV-V

SPECIFICATIONS 50 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -ORDER 4 Poles 4 Poles single cross couplingATV Spurious supress -DVB Spurious supress -ATSC Non stringent mask -ISDB Spurious supress -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 7/16 female (standard)

7/16-m, N-f/m, EIA 7/8"-f/m


TYPICAL DATA ** 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSCART. NO. BPF4-4C05-00N0 BPF4-4C05-00N0 BPF4-4C05-00N0INSERTION LOSSAvg. signal bandwidth <0.4 dB <0.55 dB <0.5 dBCenter frequency <0.4 dB <0.5 dB <0,45 dBSignal band edge ± 3.8 MHz <0.5 dB ± 2.79 MHz <0.65 dB ± 2.69 MHz <0,55 dB

± 4.2 MHz >0.5 dB ± 3.15 MHz >0.60 dB ± 3.5 MHz >0,60 dB± 6.0 MHz >3.5 dB ± 4.5 MHz >3.7 dB ± 6 MHz >6 dB± 12.0 MHz >28 dB ± 9.0 MHz >28 dB ± 9 MHz >24 dB

GROUP DELAY <20 ns <25 ns <15 nsMAX INPUT POWER RATING * 700 W / 13 dB (crest factor) 550 W / 13 dB (crest factor) 600 W / 11 dB (crest factor)TEMPERATURE RISE <6,0 °C / 100 W <8,0 °C / 100 W <7,0 °C / 100 WMASK COMPLIANT NA NA Non stringent mask




0

2,5

5

7,5

10

12,5

15

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12

Deviation from centre frequency, [MHz]

Atte

nuat

ion,

[dB]

BPF4-4C05-00NX BPF4-4C05-00NX


BAND IV-V

SPECIFICATIONS 50 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -ORDER 4 Poles 4 Poles single cross couplingATV Spurious supress -DVB Spurious supress -ATSC Non stringent mask -ISDB Spurious supress -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 7/16 female (standard)

7/16-m, N-f/m, EIA 7/8"-f/m




GROUP DELAY <20 ns <25 ns <15 nsMAX INPUT POWER RATING * 700 W / 13 dB (crest factor) 550 W / 13 dB (crest factor) 600 W / 11 dB (crest factor)TEMPERATURE RISE <6,0 °C / 100 W <8,0 °C / 100 W <7,0 °C / 100 WMASK COMPLIANT NA NA Non stringent mask




0

2,5

5

7,5

10

12,5

15

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]



Attenuation & Return loss

BPF4-4C05-0NXX



L x W x H (5.5 x 4.7 x 8.7-11.2 in)

WEIGHT 3.6 kg (7.9 lb)




PRODUCT FEATURES�� Small size�� Retunable�� Compace design�� Low insertion loss�� Temperature compensated�� Available with cross-coupling�� 10-year comprehensive warranty

* Data in table is typical data at 666 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The filter can be tuned for other specifications or bandwidth.Please contact us for a designed specification.** Max input power at <50 °C temprice at max frequency

ARTICLE: BPF4-4C05-0NAA



0 = Number of cross couplingN = CoatingA = Input connection A = Output connection





BANDWIDTH 6 - 8 MHz

STANDARD ORDER 6 Poles double cross coupling

OPTIONAL ORDER 6 Poles with or without single cross coupling


DVB Non critical mask

ATSC Stringent mask

ISDB Non critical mask

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








BAND III

BAND III



INSERTION LOSS




± 4.2 MHz >5 dB ± 3.15 MHz >1.9 dB ± 3.5 MHz >2 dB






MASK COMPLIANT Non critical mask Non critical mask Stringent mask

Revision B



L x W x H (8.4 x 4.7 x 8.7-11.2 in)

WEIGHT 4.6 kg (10.1 lb)





BAND IV-V




7/16-m, N-f/m, EIA 7/8"-f/m








0

2

4

6

8

10

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]



Temperature rise / Avg. attenuationBPF4-6C05-XXXX

BAND IV-V




7/16-m, N-f/m, EIA 7/8"-f/m








0

2

4

6

8

10

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]



Attenuation & Return lossBPF4-6C05-2NXX








ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz




DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS

Avg. signal bandwidth <1.06 dB <1.45 dB <1 dB



± 4.2 MHz >15 dB ± 3.15 MHz >15 dB ± 3.5 MHz >2.1 dB








Revision B



L x W x H (10.5 x 4.7 x 8.7-11.2 in)






BAND IV-V



ATV Spurious supress -DVB Critical mask -ATSC Stringent mask -ISDB Critical mask -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX OPERATING TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 7/16 female (standard)

7/16-m, N-f/m, EIA 7/8"-f/m

DIMENSIONS ( L X W X H ) 266x119x220-285 mm -(Inch) (10,5x4.7x8.7-11.2 in) -WEIGHT 6 kg (13.2 lb) -FRAME Stand alone 19" subrackCOLOUR Frosted black -


± 4.2 MHz >15 dB ± 3.15 MHz >15 dB ± 3.5 MHz >2.1 dB± 6.0 MHz >26 dB ± 4.5 MHz >31dB ± 6 MHz >29dB± 12.0 MHz >51 dB ± 9.0 MHz >61 dB ± 9 MHz >63 dB

GROUP DELAY <360 ns <450 ns <80 nsMAX INPUT POWER RATING * 550 W / 13 dB (crest factor) 450 W / 13 dB (crest factor) 600 W / 11 dB (crest factor)TEMPERATURE RISE <7,5 °C / 100 W <9,5 °C / 100 W <7,0 °C / 100 WMASK COMPLIANT Critical mask Critical mask Stringent mask




0

2

4

6

8

10

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 1,1 1,2 1,3 1,4 1,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]



BAND IV-V




7/16-m, N-f/m, EIA 7/8"-f/m








0

2

4

6

8

10

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 1,1 1,2 1,3 1,4 1,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




BAND IV-V




7/16-m, N-f/m, EIA 7/8"-f/m








0

2

4

6

8

10

0 0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1 1,1 1,2 1,3 1,4 1,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]



Attenuation & Return lossBPF4-8C05-2NXX



BAND III

BAND III








BAND III

BAND III

UHF Bandpass filter3 kW rms, 4 Pole



BANDWIDTH 6 - 8 MHz







IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)





OPTIONAL CONNECTIONS 7/16 m/f, 3 1/8” unflange


ARTICLE NO BPF4-4C14-0P11 BPF4-4C14-0P11 BPF4-4C14-0P11

INSERTION LOSS








MAX INPUT POWER RATING** 3.0 kW / 13 dB (crest factor) 2.5 kW / 13 dB (crest factor) 2.8 kW / 11 dB (crest factor)



Revision A


BAND IV-V

SPECIFICATIONS 140 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -ORDER 4 Poles 4 Poles single cross couplingATV Spurious supress -DVB Spurious supress -ATSC Non stringent mask -ISDB Spurious supress -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 1 5/8" unflange

7/16-m/f, 3 1/8" unflange

DIMENSIONS ( L X W X H ) 368x335x245-315 mm -(Inch) (14.5x13.2x9.6-12.4 in) -WEIGHT 18 kg (39.7 lb) -FRAME Stand alone 19" subrackCOLOUR Frosted black -



GROUP DELAY <25 ns <30 ns <15 nsMAX INPUT POWER RATING * 3.3 kW / 13 dB (crest factor) 2.8 kW / 13 dB (crest factor) 3.3 kW / 11 dB (crest factor)TEMPERATURE RISE <1,0 °C / 100 W <1,3 °C / 100 W <1,3 °C / 100 WMASK COMPLIANT Spurious supress Spurious supress Non stringent mask

UHF Bandpass filter3.3 kW rms 4 poles



0

0,5

1

1,5

2

2,5

3

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen snygg bild



BAND IV-V










0

0,5

1

1,5

2

2,5

3

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




BPF4-4C14-0PXX



L x W x H (14.5 x 13.2 x 9.6-12.4 in)





PRODUCT FEATURES�� Small size�� Retunable�� Compact design�� Low insertion loss�� Temperature compensated�� Available with cross-coupling�� 10-year comprehensive warranty

* Data in table is typical data at 666 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The filter can be tuned for other specifications or bandwidth.Please contact us for a designed specification.** Max input power at <50 °C temprice at max frequency

ARTICLE: BPF4-4C14-0P11



0 = Number of cross couplingP = Coating1 = Input connection 1 = Output connection



ationFilters

Combiners


ation



BAND III

BAND III




BANDWIDTH 6 - 8 MHz







IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)







ARTICLE NO BPF4-4C14-0N11 BPF4-4C14-0N11 BPF4-4C14-0N11

INSERTION LOSS





± 6.0 MHz >3.50 dB ± 4.5 MHz >3.60 dB ± 6.0 MHz >6 dB







BAND IV-V










0

0,5

1

1,5

2

2,5

3

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BAND IV-V










0

0,5

1

1,5

2

2,5

3

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




BPF4-4C14-0NXX



L x W x H (14.5 x 13.2 x 9.6-12.4 in)







ARTICLE: BPF4-4C14-0N11



0 = Number of cross couplingN = Coating1 = Input connection 1 = Output connection




BAND III

BAND III

UHF Bandpass filter2.5 kW rms, 6 Pole



BANDWIDTH 6 - 8 MHz

STANDARD ORDER 6 Poles single cross coupling

OPTIONAL ORDER 6 Poles with or without double cross coupling



ATSC Stringent mask


IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS











BAND IV-V

SPECIFICATIONS 140 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -ORDER 6 Poles single cross

coupling6 Poles with or without double cross coupling

ATV Spurious supress -DVB Non critical mask -ATSC Stringent mask -ISDB Non critical mask -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 1 5/8" unflange



TYPICAL DATA ** 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSCART. NO. BPF4-6C05-1CS0 BPF4-6C05-1CS0 BPF4-6C05-1CS0INSERTION LOSSAvg. signal bandwidth <0,32 dB <0,40 dB <0,40 dB

Center frequency <0,25 dB <0,35 dB <0,35 dB

Signal band edge ± 3.8 MHz <0,75 dB ± 2.79 MHz <0,61 dB ± 2.69 MHz <0,49 dB

± 4.2 MHz >5,00 dB ± 3.15 MHz >1,10 dB ± 3.5 MHz >1,35 dB

± 6.0 MHz >16 dB ± 4.5 MHz >17 dB ± 6 MHz >29 dB


GROUP DELAY <255 ns <150 ns <75 nsMAX INPUT POWER RATING * 3 kW / 13 dB (crest factor) 2.4 kW / 13 dB (crest factor) 2.4 kW / 11 dB (crest factor)TEMPERATURE RISE <1,3 °C / 100 W <1,6 °C / 100 W <1,6 °C / 100 WMASK COMPLIANT Non critical mask Non critical mask Stringent mask

UHF Bandpass filter3 kW rms 6 poles



0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-6C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]

BPF4-6C14-1CSX BPF4-6C14-1CSX

Har ingen fin bild



BAND IV-V











± 12.0 MHz >41 dB ± 9.0 MHz >47 dB ± 9 MHz >63 dBGROUP DELAY <255 ns <150 ns <75 nsMAX INPUT POWER RATING * 3 kW / 13 dB (crest factor) 2.4 kW / 13 dB (crest factor) 2.4 kW / 11 dB (crest factor)TEMPERATURE RISE <1,3 °C / 100 W <1,6 °C / 100 W <1,6 °C / 100 WMASK COMPLIANT Non critical mask Non critical mask Stringent mask




0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-6C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild



BPF4-6C14-1PXX



L x W x H (20.2 x 13.2 x 9.6-12.4 in)













ationFilters

Combiners


ation



BAND III

BAND III




BANDWIDTH 6 - 8 MHz





ATSC Stringent mask


IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS











BAND IV-V












GROUP DELAY <255 ns <150 ns <75 nsMAX INPUT POWER RATING * 3 kW / 13 dB (crest factor) 2.4 kW / 13 dB (crest factor) 2.4 kW / 11 dB (crest factor)TEMPERATURE RISE <1,3 °C / 100 W <1,6 °C / 100 W <1,6 °C / 100 WMASK COMPLIANT Non critical mask Non critical mask Stringent mask




0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-6C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild



BAND IV-V











± 12.0 MHz >41 dB ± 9.0 MHz >47 dB ± 9 MHz >63 dBGROUP DELAY <255 ns <150 ns <75 nsMAX INPUT POWER RATING * 3 kW / 13 dB (crest factor) 2.4 kW / 13 dB (crest factor) 2.4 kW / 11 dB (crest factor)TEMPERATURE RISE <1,3 °C / 100 W <1,6 °C / 100 W <1,6 °C / 100 WMASK COMPLIANT Non critical mask Non critical mask Stringent mask




0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-6C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild



BPF4-6C14-1NXX



L x W x H (20.2 x 13.2 x 9.6-12.4 in)












UHF Bandpass filter2.3 W rms, 8 Pole



BANDWIDTH 6 - 8 MHz




DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS












Revision A



L x W x H (25.9 x 13.2 x 9.6-12.4 in)








BAND III

BAND III

BAND IV-V

SPECIFICATIONS 140 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -ORDER

8 Poles single cross coupling

8 Poles with or without double cross coupling

ATV Spurious supress -DVB Critical mask -ATSC Stringent mask -ISDB Critical mask -IMPEDANCE 50 Ohm -RETURN LOSS (VSWR) >26 dB (<1.11) -TEMPERATUR STABILITY <2 kHz / °C -MAX PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -CONNECTORS 1 5/8" unflange






± 4.2 MHz >15 dB ± 3.15 MHz >15 dB ± 3.5 MHz >1,3 dB


± 12.0 MHz >51 dB ± 9.0 MHz >61 dB ± 9 MHz >63 dBGROUP DELAY <540 ns <470 ns <105 nsMAX INPUT POWER RATING * 2.7 kW / 13 dB (crest factor) 2.2 kW / 13 dB (crest factor) 2.8 kW / 11 dB (crest factor)TEMPERATURE RISE <1,5 °C / 100 W <1,8 °C / 100 W <1,4 °C / 100 WMASK COMPLIANT Critical mask Critical mask Stringent mask




0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-8C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild det skulle ju varit trevligt med ett fottat svart filter



BAND IV-V
















0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-8C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BPF4-8C14-1PXX







ationFilters

Combiners


ation

UHF Bandpass filter2.7 W rms, 8 Pole



BANDWIDTH 6 - 8 MHz




DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS












Revision B



L x W x H (25.9 x 13.2 x 9.6-12.4 in)








BAND III

BAND III

BAND IV-V
















0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-8C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BAND IV-V
















0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-8C14-XXSX


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BPF4-8C14-1NXX








BAND III

BAND III




BANDWIDTH 6 - 8 MHz







IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)





OPTIONAL CONNECTIONS 3 1/8” unflange, NAX 120



INSERTION LOSS











Revision A

Temperature rise / Avg. attenuation BPF4-4C20-xxxx

BAND IV-V


1 5/8" unflange, RL98 unflange


TYPICAL DATA ** 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSCART. NO. BPF4-4C20-00S0 BPF4-4C20-00S0 BPF4-4C20-00S0INSERTION LOSSAvg. signal bandwidth <0,13 dB <0,16 dB <0,15 dB




± 6.0 MHz >3,5 dB ± 4.5 MHz >3,5 dB ± 6 MHz >6,0 dB

± 12.0 MHz >28 dB ± 9.0 MHz >28 dB ± 9 MHz >24 dBGROUP DELAY <25 ns <30 ns <15 nsMAX INPUT POWER RATING * 5 kW / 13 dB (crest factor) 5 kW / 13 dB (crest factor) 7 kW / 11 dB (crest factor)TEMPERATURE RISE <0,6 °C / 100 W <0,7 °C / 100 W <0,7 °C / 100 WMASK COMPLIANT Spurious supress Spurious supress Non stringent mask




0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

2,25

2,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

BPF4-4C20-XXSXAttenuation & Return loss

-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]

BPF4-4C20-00SX BPF4-4C20-00SX




BAND IV-V













0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

2,25

2,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




BPF4-4C20-0PXX



L x W x H (18.5 x 18.7 x 10.7-13.5 in)













ationFilters

Combiners


ation



BAND III

BAND III




BANDWIDTH 6 - 8 MHz







IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS












BAND IV-V













0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

2,25

2,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BAND IV-V













0

0,25

0,5

0,75

1

1,25

1,5

1,75

2

2,25

2,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




BPF4-4C20-0NXX



L x W x H (18.5 x 18.7 x 10.7-13.5 in)











Revision B




BAND III

BAND III




BANDWIDTH 6 - 8 MHz





ATSC Stringent mask


IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS











Revision A


BAND IV-V





DIMENSIONS ( L X W X H ) 676x475x272-343 mm -(Inch) (26.6x18.7x10.7-13.5 in) -WEIGHT 34 kg (75 lb) -FRAME Stand alone 19" subrackCOLOUR Frosted black -






± 12.0 MHz >41 dB ± 9.0 MHz >47 dB ± 9 MHz >63 dBGROUP DELAY <260 ns <155 ns <75 nsMAX INPUT POWER RATING * 5 kW / 13 dB (crest factor) 4.8 kW / 13 dB (crest factor) 5 kW / 11 dB (crest factor)TEMPERATURE RISE <0,7 °C / 100 W <0,9 °C / 100 W <0,9 °C / 100 WMASK COMPLIANT Non critical mask Non critical mask Stringent mask




0

0,25

0,5

0,75

1

1,25

1,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild



BPF4-6C20-1PXX

BAND IV-V















0

0,25

0,5

0,75

1

1,25

1,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild




L x W x H (26.6 x 18.7 x 10.7-13.5 in)













ationFilters

Combiners


ation


BPF4-6C20-1NXX



BAND III

BAND III




BANDWIDTH 6 - 8 MHz





ATSC Stringent mask


IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS











Revision B


BAND IV-V















0

0,25

0,5

0,75

1

1,25

1,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild


BAND IV-V















0

0,25

0,5

0,75

1

1,25

1,5

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]


Har ingen fin bild




L x W x H (26.6 x 18.7 x 10.7-13.5 in)















BANDWIDTH 6 - 8 MHz




DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS












Revision A



L x W x H (34.7 x 18.7 x 10.7-13.5 in)






BAND IV-V












± 12.0 MHz >51 dB ± 9.0 MHz >61 dB ± 9 MHz >63 dBGROUP DELAY <600 ns <500 ns <110 nsMAX INPUT POWER RATING * 5 kW / 13 dB (crest factor) 4.2 kW / 13 dB (crest factor) 5.4 kW / 11 dB (crest factor)TEMPERATURE RISE <0,8 °C / 100 W <1,1 °C / 100 W <0,8 °C / 100 WMASK COMPLIANT Critical mask Critical mask Stringent mask




0

0,25

0,5

0,75

1

1,25

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




Temperature rise / Avg. attenuationBPF4-8C20-xxxx

BAND IV-V
















0

0,25

0,5

0,75

1

1,25

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BPF4-8C20-1Pxx



BAND III

BAND III







ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz




DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm

VSWR >26 dB (<1.11)








INSERTION LOSS












Revision A



L x W x H (34.7 x 18.7 x 10.7-13.5 in)






BAND IV-V
















0

0,25

0,5

0,75

1

1,25

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]




Temperature rise / Avg. attenuationBPF4-8C20-xxxx

BAND IV-V
















0

0,25

0,5

0,75

1

1,25

0,05 0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]


-60

-55

-50

-45

-40

-35

-30

-25

-20

-15

-10

-5

0

-12 -10 -8 -6 -4 -2 0 2 4 6 8 10 12


Atte

nuat

ion,

[dB]





BPF4-8C20-1Nxx



BAND III

BAND III






UHF Bandpass filter12 and 15 kW rms, 3 Cavities

Insertion loss (red / blue) and return loss (green)

PRODUCT FEATURES

�� Design based on waveguide technology

�� Flexible modular design



�� Suitable for use with IOT or solid state trans-

mitter in combined operation for vision/sound

to eliminate out-of-band products



PRODUCT PROFILE

These 3 Cavitites, single-mode, waveguide filters

employ the low-loss, high-power characteristics of

waveguide technology with coaxial input and output.

An ideal reflective filter for analogue and digital trans-

mitters, or as a component within a channel combiner,

they provide high rejection and isolation in a sturdy,

self-supporting, compact assembly. Available for 12

kW maximum input power or with black finish and

cooling fins for handling up to 15 kW rms.

ARTICLE CWG4-3C00-A0 BPF4-3CWG-AA00


INPUT POWER (Varies according to channel)

12 kW rms 15 kW rms

20 kW peak sync 25 kW peak sync


VSWR <1.1 (>26 dB) <1.1 (>26 dB)

INSERTION LOSS


±3.8 MHz <0.1 dB <0.1 dB

±4.2 MHz <0.1 dB <0.1 dB

±6.0 MHz >0.6 dB >0.6 dB

±12.0 MHz >10 dB >10 dB

STANDARD CONNECTION RL98 unflange RL98 unflange

OPTIONAL CONNECTIONS 3 1/8” unflange 3 1/8” unflange


LENGTH 540 mm (21.3 in) 540 mm (21.3 in)

DIAMETER Ch 21; 500 mm (20 in) Ch 21; 500 mm (20 in)

Varies according to channel Ch 68; 285 mm (11 in) Ch 68; 285 mm (11 in)

WEIGHT Varies according to channel Varies according to channel

OTHER Black painted with cooling fins





BAND III

BAND III



ationFilters

Combiners


ation


Insertion loss and return loss

PRODUCT FEATURES




�� Available with temperature compensation



PRODUCT PROFILE

These 6 cavities, single-mode, waveguide filters









ARTICLE CWG4-6C00-A001

WITH TEMP. COMPENSATION BPF4-6CWG-AA00 BPF4-6CWG-AB00

FREQUENCY 470 - 860 MHz 470 - 860 MHz 470 - 860 MHz


12 kW rms 12 kW rms 15 kW rms

IMPEDANCE 50 Ohm 50 Ohm 50 Ohm

VSWR <1.1 (>26 dB) <1.1 (>26 dB) <1.1 (>26 dB)

INSERTION LOSS


±3.8 MHz <0.25 dB <0.25 dB <0.25 dB

±4.2 MHz >0.5 dB >0.5 dB >0.5 dB

±6.0 MHz >20 dB >20 dB >20 dB

±12.0 MHz <60 dB <60 dB <60 dB

STANDARD CONNECTION RL98 unflange RL98 unflange RL98 unflange

OPTIONAL CONNECTIONS 3 1/8” unflange 3 1/8” unflange 3 1/8” unflange


LENGTH 1200 mm (47 in) 1200 mm (47 in) 1200 mm (47 in)

DIAMETER Ch 21; 500 mm (20 in) Ch 21; 500 mm (20 in) Ch 21; 500 mm (20 in)

Varies according to channel Ch 68; 285 mm (11 in) Ch 68; 285 mm (11 in) Ch 68; 285 mm (11 in)

WEIGHT Varies according to channel Varies according to channel Varies according to channel






BAND III

BAND III



Insertion loss and return loss

PRODUCT FEATURES



�� 7 cavities for sharp filtering





PRODUCT PROFILE

These 7 cavities, single-mode, waveguide filters









ARTICLE BPF4-7CWG-AA00 BPF4-7CWG-AB00



12 kW rms 15 kW rms


VSWR <1.1(<26 dB) <1.1(<26 dB)

INSERTION LOSS


±3.8 MHz <0.3 dB <0.3 dB

±4.2 MHz >1 dB >1 dB

±6.0 MHz >28 dB >28 dB

±12.0 MHz >76 dB >76 dB

STANDARD CONNECTION RL98 unflange RL98 unflange

OPTIONAL CONNECTION 3 1/8” unflange 3 1/8” unflange


LENGTH 1416 mm (55.7 in) 1416 mm (55.7 in)

DIAMETER Ch 21; 500 mm (20 in) Ch 21; 500 mm (20 in)

Varies according to channel Ch 68; 285 mm (11 in) Ch 68; 285 mm (11 in)

WEIGHT Varies according to channel Varies according to channel






BAND III

BAND III



ationFilters

Combiners


ation

Low Pass filterUHF Harmonic Rejection Filter

PRODUCT FEATURES


�� Low VSWR

�� Customised solutions


PRODUCT PROFILE

Exir Broadcasting manufactures low

pass filters for all needs. High pass fil-

ters are also available on request.

ARTICLE LPF4-1116-AA00 LPF4-1116-AB00 LPF4-1139-AA01 LPF4-1139-AB00

FREQUENCY RANGE 470 - 598 MHz 558 - 710 MHz 470 - 598 MHz 574 - 710 MHz

MAX INPUT POWER 1 kW rms 1 kW rms 5 kW rms 5 kW rms


VSWR <1.06 <1.06 <1.06 <1.06

INSERTION LOSS < 0.1 dB < 0.1 dB < 0.1 dB < 0.1 dB

HARMONIC RESPONSE 2nd -50 dB 2nd -50 dB 2nd -50 dB 2nd -50 dB

3rd -50 dB 3rd -50 dB 3rd -50 dB 3rd -50 dB

INTERFACE, PORTS 7/16 7/16 1 5/8” unflange 1 5/8” unflange

ARTICLE LPF4-1139-AC01 LPF4-1177-AA00 LPF4-1177-AB00 LPF4-1177-AC00

FREQUENCY RANGE 694 - 854 MHz 470 - 582 MHz 558 - 710 MHz 702 - 854 MHz



VSWR <1.06 <1.06 <1.06 <1.06

INSERTION LOSS 0.15 dB 0.05 dB 0.05 dB 0.05 dB

HARMONIC RESPONSE 2nd -50 dB 2nd -40 dB 2nd -40 dB 2nd -40 dB

3rd -50 dB 3rd -40 dB 3rd -50 dB 3rd -50 dB

INTERFACE, PORTS 1 5/8” unflange 3 1/8” unflange 3 1/8” unflange 3 1/8” unflange

ARTICLE LPF4-0998-AD00 LPF4-0998-AC00 LPF4-0912-AE00

FREQUENCY RANGE 774 - 854 MHz 702 - 822 MHz 750 - 854 MHz

MAX INPUT POWER 20 kW rms 20 kW rms 30 kW rms

IMPEDANCE 50 Ohm 50 Ohm 50 Ohm

VSWR <1.06 <1.06 <1.06

INSERTION LOSS 0.1 dB 0.05 dB 0.05 dB

HARMONIC RESPONSE 2nd -50 dB 2nd -35 dB 2nd -50 dB

3rd -50 dB 3rd -50 dB 3rd -50 dB

INTERFACE, PORTS RL98 unflange RL98 unflange NAX 120

All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation.Data in table is typical .



BAND III

BAND III




ationFilters

Combiners


ation

1

Combiners CONTENTS

Introduction 48

BAND II POWER

FM Constant Impedance Combiner, 3 Pole 1 kW 50


FM Constant Impedance Combiner, 3 Pole 5 kW



FM Starpoint Combiner, 3 Pole 5 kW 54

FM Starpoint Combiner, 3 Pole 10 kW 55


BAND III POWER

DAB/DMB Constant Impedance Combiner, 6 Pole 2 kW 57

DAB/DMB Constant Impedance Combiner, 6 Pole 4 kW 58

VHF Constant Impedance Combiner, 6 Pole, 2 External Notches 7 MHz 4 kW 60

VHF Constant Impedance Combiner, 6 Pole 8 kW 61

VHF Stretch Line Combiner 2 x 5 and 2 x 15 kW 63

BAND IV-V POWER

UHF Stretch Line Combiner 2 x 3 kW 64

UHF Stretch Line Combiner 2 x 14 and 2 x 8 kW 65

UHF Constant Impedance Combiner, 4 Pole 30 W 66

UHF Manifold Combiner, 3 and 4 Pole 50 W 67

UHF Constant Impedance Combiner, 4 Pole 1.3 kW 71



UHF Constant Impedance Combiner, 4 Pole 6 kW 81

UHF Constant Impedance Combiner, 6 Pole 6 kW 82


UHF Constant Impedance Combiner, 4 Pole 10 kW



UHF Constant Impedance Combiner, 3 Cavities 24 and 30 kW



UHF Constant Impedance Combiner Dual Digital/Analogue, 6 Cavities 30 kW

UHF Constant Impedance Combiner Dual Digital/Analogue, 7 Cavities 30 kW


CombinersExir Broadcasting offers a complete range of FM, analogue and digital TV combiners to cover the international broadcasting frequency bands.

The purpose of a channel combiner is to combine different signals into one antenna. Important parameters are isolation of inputs, return loss and insertion loss.

Every combining system is different, which is why we

always carry out a complete analysis before recom-

mending a custom solution, and why our combiners

have been specially developed to be flexible in any

situation. With floor space often limited, all our models

are ingeniously compact in design, and can often be

FM Combiners

DAB/DMB Combiners

Choose from Starpoint and constant impedance combiner

models. Notches are also available for critical situations with

less channel spacing. A bandpass/notch filter combiner module

consists of a balanced pair of bandpass/bandstop filters, two

3dB couplers and a reject load. One input is for the narrowband,

the other for wideband. A starpoint combiner consists of one

bandpass filter per channel with outputs that are connected to

a common T-junction. All our FM combiners are able to handle

the most complex combining requirements. Available with input

powers up to 60 kW.

All our Digital Audio Broadcasting Combiners fully comply with

the Eureka 147 Spectrum mask for both critical and non-critical

specifications. A bandpass filter combiner module consists of a

balanced pair of bandpass filters, two 3dB couplers and a reject

load. One input is used for the narrowband channel, the other for

wideband. The combiner makes it possible to combine a digital

transmitter with another, or an existing BIII TV-system. Available

with up to 8 Pole filters and powers up to 4 kW.

either floor or ceiling mounted. Our commitment to us-

ing only the highest quality components means you can

rely on our combiners to deliver stable and trouble-free

performance. Final measurement data is provided with

each combiner.

2



ationFilters

Combiners


ation

Digital CombinersUHF Analogue and

VHF Combiners

Stretch Line Combiners (or Commutating Line

Combiners) consist of two 3 dB couplers and

rigid lines of proper length. High isolation and

extremely low losses are the key attributes

of these models. No tuning is required and

two transmitters can be combined into one

common antenna. These economical units are

ideal for non -adjacent channel combining.

Our combiners for the UHF Band fully comply with European and

International standards, with spectrum-masks for both critical

and non-critical specifications. Multi-mode combiners were

developed to handle adjacent channels. High isolation perfor-

mance with compact design makes these models easy to posi-

tion and mount. They are made from aluminium and constructed

to handle power up to 30 kW RMS. All our combiners are convec-

tion-cooled, and available with 3, 4, 6, 7 and 8 Pole filters. These

easy to install multi-channel systems have low loss performance,

excellent rejection and temperature stability.

VHF combiners from Exir Broadcasting are built using our

standard technology for filters and combiners and are therefore

extremely reliable. Constant impedance combiners are ideal for

multi-channel systems while starpoint combiners provide a more

economical solution for combining two channels. Our constant

impedance and starpoint models are made from aluminium and

are equipped to handle as much as 14 kW of input power.

UHF Stretch line combiners

3


FM Constant Impedance Combiner1 kW, 3 Pole

PRODUCT FEATURES

Flexible modular design �

Easy to place – mount on ceiling or floor �

Low insertion loss �

Retunable �

10-year comprehensive warranty �

PRODUCT PROFILE

These balanced FM combiners employing broad-

band hybrids and FM tunable filters enable the

combining of FM transmitters from 1 kW to 5 kW.

Dry reject loads and a stackable frame design allows

broadcasters to make the best use of available floor

space and still produce systems of world-beating

flexibility and value.

ARTICLE COM2-3BPF-A005


IMPEDANCE 50 Ohm

NARROWBAND INPUT

MAXIMUM INPUT POWER 1 kW

INPUT VSWR <1.07 (>30 dB)

STANDARD INPUT CONNECTOR 1 5/8” unflange

OPTIONAL INPUT CONNECTORS 7/8” flange or 7/16 f/m

INSERTION LOSS


±200 kHz <0.85 dB

WIDEBAND INPUT




INSERTION LOSS

±1.5 MHz <0.4 dB

±3.0 MHz <0.1 dB

ISOLATION AND CHANNEL SPACING

NARROWBAND - WIDEBAND >36 dB

WIDEBAND - NARROWBAND

±1.5 MHz from narrowband Cf >40 dB


MIN CHANNEL SPACING

Lower spacing on request 2.0 MHz

OUTPUT

MAXIMUM OUTPUT POWER 5 kW

STANDARD OUTPUT CONNECTOR 1 5/8” unflange

OPTIONAL OUTPUT CONNECTORS 7/8” flange or 7/16 f/m



L x W x H (39 x 17 x 11 in)


Widebandinput

Narrowbandinput

Output



BAND III

BAND III


Data in table is typical.



ationFilters

Combiners


ation


PRODUCT FEATURES


�� Easy to place – mount on ceiling or floor


�� Retunable


PRODUCT PROFILE


band hybrids and FM tunable filters enable the

combining of FM transmitters from 1 kW to 5 kW.

Dry reject loads and a stackable frame design allows




ARTICLE CI23C06A-0PAA111


IMPEDANCE 50 Ohm

NARROWBAND INPUT

MAXIMUM INPUT POWER 1 kW




INSERTION LOSS


±200 kHz <0.85 dB

WIDEBAND INPUT




INSERTION LOSS

±1.5 MHz <0.4 dB

±3.0 MHz <0.1 dB






MIN CHANNEL SPACING

Lower spacing on request 2.0 MHz

OUTPUT



OPTIONAL OUTPUT CONNECTORS 7/8” flange or 7/16 f/m



L x W x H (20 x 10 x 26 in)


Revision A 5

Widebandinput

Narrowbandinput

Output



BAND III

BAND III


Data in table is typical.



PRODUCT FEATURES

Flexible modular design �

Easy to place – mount on ceiling or floor �

Low insertion loss �

Retunable �

10-year comprehensive warranty �

PRODUCT PROFILE


band hybrids and FM tunable filters enable the com-

bining of FM transmitters from 2,5 kW to 10 kW. Dry

reject loads and a stackable frame design allows




ARTICLE COM2-3BPF-A001 COM2-3BPF-A011



NARROWBAND INPUT

MAXIMUM INPUT POWER 4 kW 2,5 kW

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)

STANDARD INPUT CONNECTOR 1 5/8” unflange 1 5/8” unflange

OPTIONAL INPUT CONNECTORS 7/8” flange or 7/16 f/m 7/8” flange or 7/16 f/m

INSERTION LOSS


±200 kHz <0.5 dB <1.25 dB

WIDEBAND INPUT

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)



INSERTION LOSS

±1.0 MHz – <0.2 dB

±1.5 MHz <0.4 dB <0.1 dB

±3.0 MHz <0.1 dB <0.1 dB


NARROWBAND - WIDEBAND >36 dB >36 dB


±1.0 MHz from narrowband Cf – >45 dB

±1.5 MHz from narrowband Cf >40 dB >55 dB


MIN CHANNEL SPACING

Lower spacing on request 1.5 MHz 1.0 MHz

OUTPUT

MAXIMUM OUTPUT POWER 10 kW 10 kW

STANDARD OUTPUT CONNECTOR 1 5/8” unflange 1 5/8” unflange

OPTIONAL OUTPUT CONNECTORS 7/8” flange or 7/16 f/m 7/8” flange or 7/16 f/m



L x W x H (40 x 16 x 21 in) (40 x 16 x 21 in)

WEIGHT ~50 kg (110 lb) ~50 kg (110 lb)



Data in tables is typical. The combiner can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements.

Widebandinput

Narrowbandinput

Output



BAND III

BAND III



PRODUCT FEATURES




�� Retunable


PRODUCT PROFILE



bining of FM transmitters from 2.5 kW to 10 kW. Dry





ARTICLE CI23C11A-0PAA11 CI23C11B-0PAA111



NARROWBAND INPUT

MAXIMUM INPUT POWER 4 kW 2.5 kW

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)



INSERTION LOSS


±200 kHz <0.5 dB <1.25 dB

WIDEBAND INPUT

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)



INSERTION LOSS

±1.0 MHz – <0.2 dB

±1.5 MHz <0.4 dB <0.1 dB

±3.0 MHz <0.1 dB <0.1 dB







MIN CHANNEL SPACING


OUTPUT






L x W x H (20 x 15 x 39 in) (20 x 15 x 39 in)

WEIGHT ~50 kg (110 lb) ~50 kg (110 lb)




Revision A

Widebandinput

Narrowbandinput

Output



BAND III

BAND III



PRODUCT FEATURES




�� Retunable


PRODUCT PROFILE



bining of FM transmitters from 2.5 kW to 10 kW. Dry





ARTICLE COM2-3BPF-A001P COM2-3BPF-A011P



NARROWBAND INPUT

MAXIMUM INPUT POWER 5 kW 3 kW

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)



INSERTION LOSS


±200 kHz <0.5 dB <1.25 dB

WIDEBAND INPUT

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)



INSERTION LOSS

±1.0 MHz – <0.2 dB

±1.5 MHz <0.4 dB <0.1 dB

±3.0 MHz <0.1 dB <0.1 dB







MIN CHANNEL SPACING


OUTPUT






L x W x H (40 x 16 x 21 in) (40 x 16 x 21 in)

WEIGHT ~50 kg (110 lb) ~50 kg (110 lb)

Sharp tuned and temperature compensated



Revision A

Widebandinput

Narrowbandinput

Output



BAND III

BAND III

6



ationFilters

Combiners


ation


PRODUCT FEATURES





PRODUCT PROFILE

These balanced FM combiners employing broadband

hybrids and FM tunable filters enable the combining of

FM transmitters from 16 kW to 40 kW. Dry reject loads

and a stackable frame design that allows broadcast-

ers to make the best use of available floor space pro-

duce systems of world-beating flexibility and value.

ARTICLE COM2-3BPF-AM00



NARROWBAND INPUT


INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)

INPUT CONNECTOR 3 1/8” unflange 3 1/8” unflange

INSERTION LOSS


±200 kHz <0.25 dB <0.37 dB

WIDEBAND INPUT

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)


INSERTION LOSS

±1.0 MHz <0.55 dB <0.15 dB

±1.5 MHz <0.15 dB <0.07 dB

±3.0 MHz <0.05 dB <0.05 dB







MIN CHANNEL SPACING


OUTPUT

MAXIMUM OUTPUT POWER 40 kW rms 40 kW rms

OUTPUT CONNECTOR 3 1/8” unflange 3 1/8” unflange



L x W x H (36 x 38 x 25.3 in) (36 x 38 x 25.3 in)

WEIGHT ~170 kg (375 lb) ~170 kg (375 lb)

Widebandinput

Narrowbandinput

Output

All average power values and technical data refer to an ambient temperature of + 20 °C with normal air flow. The product will have a maximum surface temperature of + 70 °C. Maximum power capacity may be lower depending on channel allocation.


Revision B 7



BAND III

BAND III



PRODUCT FEATURES



�� Retunable 87-108 MHz



PRODUCT PROFILE

These balanced FM combiners employing broadband

hybrids and FM tunable filters enable the combining of

FM transmitters from 46 kW to 60 kW. Dry reject loads

and a stackable frame design that allows broadcast-

ers to make the best use of available floor space pro-

duce systems of world-beating flexibility and value.

ARTICLE COM2-3BPF-AN00



NARROWBAND INPUT


INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)


OPTIONAL INPUT CONNECTOR 4 1/2” unflange 4 1/2” unflange

INSERTION LOSS


±200 kHz <0.16 dB <0.25 dB

WIDEBAND INPUT

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB)


OPTIONAL INPUT CONNECTOR 4 1/2” unflange 4 1/2” unflange

INSERTION LOSS

±1.0 MHz <0.55 dB <0.15 dB

±1.5 MHz <0.15 dB <0.07 dB

±3.0 MHz <0.05 dB <0.05 dB







MIN CHANNEL SPACING


OUTPUT



OPTIONAL OUTPUT CONNECTOR 4 1/2” unflange 4 1/2” unflange



L x W x H (38 x 45.5 x 38.2 in) (38 x 45.5 x 38.2 in)

WEIGHT ~300 kg (660 lb) ~300 kg (660 lb)

Standard tuned Sharp tuned

Widebandinput

Narrowbandinput

Output

All average power values and technical data refer to an ambient temperature of + 20 °C with normal air flow. The product will have a maximum surface temperature of + 70 °C. Maximum power capacitymay be lower depending on channel allocation.


Revision A8



BAND III

BAND III



ationFilters

Combiners


ation

FM Starpoint Combiner5 kW, 3 Pole

PRODUCT FEATURES

�� Broadbanded T-junction

�� Consists of 2 bandpass filters

�� Options are 2-Pole filters and adjustable

tuning devices to ease re-tuning when required

�� Other connectors available

�� Retunable

�� A cost-efficient solution when combining

several transmitters to a single antenna


PRODUCT PROFILE

For cost-efficient combining of FM channels, the FM

starpoint combiner is a popular choice. For either sol-

id state of tube transmitters the common Pole de-

sign is FM band tunable, rugged and compact. With

a choice of connector sizes and options at higher

powers we have shown excellent performance and

reliability from hundreds of units in service.

ARTICLE COM2-3BPF-A003


IMPEDANCE 50 Ohm

MAXIMUM INPUT POWER / INPUT 5 kW



INSERTION LOSS


±200 kHz <0.35 dB

ISOLATION BETWEEN INPUTS

Input frequency spacing

±1.8 MHz >32 dB

±2.2MHz >36 dB

±3.7 MHz >45 dB

MINIMUM CHANNEL SPACING 1.8 MHz


OPTIONS Starpoint combiner for more than 2 inputs



L x W x H (31 x 29 x 41 in)




Revision A 9

Output

Input Input



BAND III

BAND III


FM Starpoint Combiner10 kW, 3 Pole

PRODUCT FEATURES

�� Broadbanded T-junction

�� Consists of 2 tuned Pole

bandpass filters

�� Options are 2-Pole filters and adjustable

tuning devices to ease re-tuning when required

�� Other connectors available

�� Retunable

�� A cost-efficient solution when combining

several transmitters to a single antenna


PRODUCT PROFILE

For cost-efficient combining or FM channels, the FM

starpoint combiner is a popular choice. For either sol-

id state of tube transmitters the common Pole de-

sign is FM band tunable, rugged and compact. With

a choice of connector sizes and options at higher

powers we have shown excellent performance and

reliability from hundreds of units in service.

ARTICLE COM2-3BPF-AG00


IMPEDANCE 50 Ohm

MAXIMUM INPUT POWER / INPUT 10 kW



INSERTION LOSS


±200 kHz <0.30 dB

ISOLATION BETWEEN INPUTS

Input frequency spacing

±1.8 MHz >30 dB

±2.2MHz >36 dB

±3.7 MHz >45 dB

MINIMUM CHANNEL SPACING 2.0 MHz


OPTIONS Starpoint combiner for more than 2 Inputs


DIMENSIONS ~1000 x 1100 x 1032 mm

L x W x H (39 x 43 x 41 in)




Revision A10

Output

Input Input



BAND III

BAND III



ationFilters

Combiners


ation


PRODUCT FEATURES



�� Retunable

�� 800kHz channel spacing

PRODUCT PROFILE

This balanced FM combiner employing

broadband hybrids and FM tunable filters

enable the combining of FM transmitters

up to 60 kW with a total output power

of up to 150 kW. If you have demands on

low losses with close frequency alloca-

tion this is the right product.

ARTICLE COM2-3BPF-AA00 COM2-3BPF-AB00 COM2-3BPF-AC00 COM2-3BPF-AD00

FREQUENCY 87 - 108 MHz 87 - 108 MHz 87 - 108 MHz 87 - 108 MHz


NARROWBAND INPUT

MAXIMUM INPUT POWER 60 kW 60 kW 50 kW 50 kW

INPUT VSWR <1.07 (>30 dB) <1.07 (>30 dB) <1.07 (>30 dB) <1.07 (>30 dB)

INPUT CONNECTOR RL98 unflange RL98 unflange RL98 unflange RL98 unflange

INSERTION LOSS

Centre frequency <0.15 dB <0.15 dB <0.15 dB <0.15 dB

±200 kHz <0.15 dB <0.15 dB <0.15 dB <0.15 dB

WIDEBAND INPUT


INPUT CONNECTOR RL98 unflange 6 1/8" unflange RL98 unflange 6 1/8” unflange

INSERTION LOSS

±1.5 MHz <0.20 dB <0.20 dB <0.20 dB <0.20 dB

±3.0 MHz <0.10 dB <0.10 dB <0.10 dB <0.10 dB


NARROWBAND - WIDEBAND >36 dB >36 dB >36 dB >36 dB


±1.5 MHz from narrowband Cf >50 dB >50 dB >50 dB >50 dB

±3.0 MHz from narrowband Cf >65 dB >65 dB >65 dB >65 dB

MIN CHANNEL SPACING

Lower spacing on request 1.5 MHz 1.5 MHz 1.5 MHz 1.5 MHz

OUTPUT

MAXIMUM OUTPUT POWER 60 kW 150 kW 60 kW 150 kW

OUTPUT CONNECTOR RL98 unflange 6 1/8" unflange RL98 unflange 6 1/8” unflange



L x W x H (65.4 x 39.8 x 73.7 in) (79.5 x 43.3 x 69.7 in) (65.4 x 39.8 x 73.7 in) (79.5 x 43.3 x 69.7 in)

WEIGHT 525 kg ( 1157 lb) 525 kg ( 1157 lb) 525 kg ( 1157 lb) 525 kg ( 1157 lb)

Aluminum resonotor Aluminum resonotor



Revision B 11

Widebandinput

Narrowbandinput

Output



BAND III

BAND III


DAB/DMB Constant Impedance Combiner2 kW rms, 6 Pole

PRODUCT FEATURES

�� With two physical notches

�� Flexible design fit in 19” rack

�� High isolation

�� Critical and non-critical mask


�� Retunable

PRODUCT PROFILE

These DAB filters and combiners now have years

of proven service throughout Europe and have met

all the requirements of the Eureka 147 specifica-

tion and individual broadcasters requirements. Fil-

ters with up to 8 sections in constant impedance

and reflective configurations have been supplied in

systems requiring stable group delay and rejection

characteristics. Common applications also include

combining with existing TV transmitters in an exist-

ing VHF antenna.

ARTICLE COM3-6BPF-AR00


IMPEDANCE 50 Ohm

NARROWBAND INPUT

MAX INPUT POWER 2 kW rms



OPTIONAL INPUT CONNECTORS 7/8” flange, 7/16 f/m

INSERTION LOSS


±0.77 MHz <2.0 dB

±0.97 MHz >20 dB

±1.75 MHz >44 dB

±3.00 MHz >72 dB

WIDEBAND INPUT

INPUT VSWR <1.05 (>32 dB), 2 specified channels


OPTIONAL INPUT CONNECTORS 7/8” flange, 7/16 f/m

INSERTION LOSS

±3.00 MHz <0.2 dB

±1.712 MHz <0.3 dB






MINIMUM CHANNEL SPACING Adjacent

OUTPUT

MAXIMUM OUTPUT POWER 10 kW rms


OPTIONAL OUTPUT CONNECTORS 7/8” flange, 7/16 f/m


DIMENSIONS 560 - 700 x 450 x 1365 mm

L x W x H (22 - 27.5 x 17.7 x 53.7 in)




Revision B12

Widebandinput

Narrowbandinput

Output



BAND III

BAND III



ationFilters

Combiners


ation

DAB/DMB Constant Impedance Combiner4 kW rms, 6 Pole

PRODUCT FEATURES

�� With two physical notches


�� Critical and non-critical mask


�� Retunable


PRODUCT PROFILE

This space-saving combiner is built with our 2 kW

notch filter to provide very sharp filtering and to

make room for more channels. It is available in two

alternative configurations, upright and low-profile, to

provide optimal fit within a station’s available space.

Revision A 13

ARTICLE COM3-6BPF-AL00 COM3-6BPF-AM00



NARROWBAND INPUT

MAX INPUT POWER 4 kW rms 4 kW rms

INPUT VSWR <1.1 (>26 dB) <1.1 (>26 dB)


INSERTION LOSS


±0.77 MHz <1.8 dB <1.8 dB

±0.97 MHz >20 dB >20 dB

±1.75 MHz >44 dB >44 dB

±3.00 MHz >70 dB >70 dB

WIDEBAND INPUT


<1.05 (>32 dB), 2 specified channels


INSERTION LOSS

±3.00 MHz <0.1 dB <0.1 dB

±1.712 MHz <0.3 dB <0.3 dB




±3.00 MHz from narrowband Cf <80 dB <80 dB

±1.712 MHz from narrowband Cf <70 dB <70 dB

MINIMUM CHANNEL SPACING Adjacent Adjacent

OUTPUT


OUTPUT CONNECTOR 3 1/8” unflange 3 1/8” unflange



L x W x H (27.3 x 37.0 x 68.2 in) (33.1 x 34.0 x 48.8 in)

WEIGHT ~300 kg (~661 lb) ~300 kg (~661 lb)

Widebandinput

Narrowbandinput

Output





BAND III

BAND III

COM3-6BPF-AL00 COM3-6BPF-AM00


0 1 2 3 4 5 6 7 8 9

10 11 12 13 14 15 16 17 18 19 20

0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 0,55 0,6 0,65 0,7 0,75 0,8 0,85 0,9 0,95 1

Tem

pera

ture

rise

[°C

/kW

]

Attenuation [dB]

Temperature rise / Avg. attenuation COM3-6BPF-XXXX & CI36BPF-XXXX

Temperature rise / Avg. attenuationCOM3-6BPF-XXXX & CI36BPF-XXXX

VHF Constant Impedance Combiner4 kW rms, 6 Pole, 2 external notchesOptional: 6 Poles, 1 Cross-coupling and 2 External notches



BAND III

BAND III

Revision C

SPECIFICATIONS STANDARD OPTIONAL


BANDWIDTH 6 - 8 MHz

ORDER 6 Poles, 2 external notches 6 Poles, 1 cross-coupling, 2 external notches


DVB Critical mask Non Critical mask

ATSC Stringent mask Non Stringent mask

ISDB Critical mask Non Critical mask

IMPEDANCE 50 Ohm

NB RETURN LOSS (VSWR) >26 dB (<1.11)

WB RETURN LOSS (VSWR) >30 dB (<1.07), 2 specified channels

MAX OUTPUT POWER RATING* 10 kW rms

NB INPUT CONNECTOR 1 5/8” unflange 7/8” unflange/flange, 7/16 f/m

WB INPUT CONNECTOR 1 5/8” unflange 7/8” unflange/flange, 7/16 f/m

OUTPUT CONNECTOR 1 5/8” unflange 7/8” unflange/flange, 7/16 f/m




DIMENSIONS AND WEIGHT OPTIONAL

DIMENSIONS 560 - 700 x 450 x 1365 mm

L x W x H (22 - 27.5 x 17.7 x 53.7 in)


FRAME Stand alone 19” rack


ARTICLE: COM3-6BPF-AP00

COM = Combiner type3 = Frequency band6 = Number of polesBPF = Filter typeA = VersionP = Version0 = Version 0 = Version

ARTICLE: CI36C14A-2PAA 111

CI = Combiner type3 = Frequency band6 = Frequency bandC = Cavity based14 = Cavity sizeA = Version2 = Number of cross couplingP = CoatingA = Narrowband coupler A = Wideband coupler1 = Narrowband connection 1 = Wideband connection 1 = Output connection

TYPICAL DATA* 8 MHz DVB-T 7 MHz DVB-T 6 MHz ATSC

ARTICLE NO COM3-6BPF-AP00 COM3-6BPF-AP00 CI36C14A-2PAA111

NB INSERTION LOSS




± 3.9 MHz >3.40 dB ± 3.7 MHz >12 dB ± 3.25 MHz >2.10 dB

± 4.2 MHz >12.0 dB ± 5.25 MHz >28 dB ± 3.5 MHz >20 dB

± 6.0 MHz >26.0 dB ± 10.5 MHz >56 dB ± 6.0 MHz >29 dB

WB INSERTION LOSS

± 24 MHz <0.10 dB ± 21 MHz <0.10 dB ± 18 MHz <0.10 dB


± 8.0 MHz <0.20 dB ± 7.0 MHz <0.20 dB ± 6.0 MHz <0.20 dB

ISOLATION

NARROWBAND - WIDEBAND >36 dB >36 dB >36 dB

WIDEBAND - NARROWBAND @



± 16 MHz >70 dB ± 14 MHz >70 dB ± 12 MHz >70 dB


NB GROUP DELAY VARIATION <470 ns <470 ns <370 ns

NB MAX INPUT POWER RATING** 4 kW / 13 dB (crest factor) 4 kW / 13 dB (crest factor) 4 kW / 11 dB (crest factor)



* Data in table is typical data at 200 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The combiner can be tuned for other specifications or bandwidth. Please contact us for a designed specification.** Max power rating at <50 °C temprice at max frequency.

14



ationFilters

Combiners


ation

VHF Constant Impedance Combiner8 kW rms, 6 Pole

PRODUCT FEATURES

�� Available with cross-coupling





�� Retunable


PRODUCT PROFILE

This constant impedance combiner is built using Exir

Broadcasting´s high performance, 4 kW bandpass

filters, which provide exceptionally sharp filtering

and contribute to the combiner’s extremely stable

operation. The combiner can be tuned to 6, 7 or 8

MHz bandwidth, and offers leading edge perform-

ance for multi-channel systems.

ARTICLE COM3-6BPF-AN00


IMPEDANCE 50 Ohm

NARROWBAND INPUT



INPUT CONNECTOR 3 1/8” unflange

INSERTION LOSS No Cross-coupling Single cross-coupling


±3.8 MHz <0.35 dB <0.9 dB

±4.2 MHz >1.5 dB >5.5 dB

±6.0MHz >24 dB >17 dB

±12.0 MHz >63 dB >27 dB

WIDEBAND INPUT


INPUT CONNECTOR 3 1/8” unflange

INSERTION LOSS

±24 MHz 0.05 dB

±16 MHz 0.05 dB

±8 MHz 0.11 dB




±8 MHz from narrowband Cf >60 dB >50 dB

±24 MHz from narrowband Cf >80 dB >60 dB

MINIMUM CHANNEL SPACING 1 free channel Adjacent

OUTPUT

MAXIMUM OUTPUT POWER 30 kW rms

OUTPUT CONNECTOR 3 1/8” unflange



L x W x H (31.5 x 20.9 x 61.6 in)

WEIGHT ~190 kg (~419 lb)

Revision A 15

Widebandinput

Narrowbandinput

Output


Data in table is typical according to a standard tuned 8 MHz channel bandwidth. The combiner can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements.



BAND III

BAND III



Below data is typical. Available for 6, 7 and 8 MHz channels.

Revision A16

ARTICLE COM3-0STL-A001 COM3-0STL-AB00

FREQUENCY 174-240 MHz 174-240 MHz



MAXIMUM INPUT POWER 2 x 5 kW rms 2 x 15 kW rms

VSWR <1.05 (>32dB) <1.05 (>32dB)

INSERTION LOSS >4 channels space: <0.3 dB >4 channels space: <0.3 dB

3 channels space: <0.5 dB 3 channels space: <0.5 dB

ISOLATION >36 dB >36 dB

MINIMUM CHANNEL SPACING 3 channels 3 channels


OPTIONAL CONNECTION 7/8” flange or 7/16 f/m

Commutating line

Input 2

OutputInput 1

PRODUCT PROFILE

Exir Broadcasting´s Stretch Line combiners are

very dependable and provide a cost-effective

alternative for combining without the use of proper

bandpass filters.

PRODUCT FEATURES

� Small size

� High isolation

� Low insertion loss

� Low return loss

� Cost-effective solution

� Easy retuning to most channels

� 10-year comprehensive warranty

VHF Stretch Line Combiner 2 x 5 and 2 x 15 kW rms

COM3-0STL-A001



BAND III

BAND III



ationFilters

Combiners


ation

UHF Stretch Line Combiner2 x 3 kW rms

PRODUCT FEATURES



�� Low return loss

�� Cost-effective solution



PRODUCT PROFILE

Exir Broadcasting Stretch Line combiners are very de-

pendable and provide a cost-effective alternative for

combining without the use of proper bandpass filters.


Below data is typical .Available for 6, 7 and 8 MHz channels.

Revision A 17

Commutatin line

Input 2

Input 1 Output

ARTICLE COM4-0STL-A013 COM4-0STL-A016

Channel space up to 9 channels Channel space more than 9 channels





VSWR <1.05 (>32 dB) <1.05 (>32 dB)

INSERTION LOSS >4 channels space; <0.3 dB >9 channels space; <0.2 dB

3 channels space; <0.5 dB




OPTIONAL CONNECTIONS 7/8” flange or 7/16 f/m 7/8” flange or 7/16 f/m


DIMENSIONS max 2000 x 460 x 670 mm max 700 x 460 x 670 mm

L x W x H (79 x 18 x 26.4 in) (27.6 x 18 x 26.4 in)

WEIGHT ~40 kg (88.2 lb) ~40 kg (88.2 lb)



BAND III

BAND III


UHF Stretch Line Combiner2 x 14 and 2 x 8 kW rms

PRODUCT FEATURES



�� Low return loss

�� Cost-effective solution



PRODUCT PROFILE

Exir Broadcasting´s Stretch Line combiners are very

dependable and provide a cost-effective alternative for

combining without the use of proper bandpass filters.

Commutatin line

Input 2

Input 1 Output

ARTICLE COM4-0STL-A010 COM4-0STL-A003

FREQUENCY 470-860 MHz 470-860 MHz




VSWR <1.05 (>32 dB) <1.05 (>32 dB)

INSERTION LOSS >4 channels space; <0.3 dB >4 channels space; <0.3 dB

3 channels space; <0.5 dB 3 channels space; <0.5 dB



STANDARD CONNECTION RL98 unflange 3 1/8” unflange



L x W x H (34 x 22 x 32 in) depending on channel (20 x 29 x 24 in) depending on channel

WEIGHT ~50 kg (110 lb) ~45 kg (99 lb)


Below data is typical. Available for 6, 7 and 8 MHz channels.

Revision A18



BAND III

BAND III



ationFilters

Combiners


ation

UHF Constant Impedance Combiner30 W rms, 4 Pole

PRODUCT FEATURES

�� Small and compact size

�� UHF tunable

�� Extremly stable

�� Possible 19” rack assembly

�� Cost efficient

�� 10-years comprehensive warranty

PRODUCT PROFILE

This low-power combiner provides exceptional per-

formance for it’s compact and flexible size, only 1U.

Full UHF tunable without requiring any replacement

of parts. Optimized for gapfiller application. Also

available in 19” rack assembly.



BAND III

BAND III


Data in table is typical according to a standard tuned 8 MHz channel bandwidth. The combiner is suitable for other bandwidths, please contact us for a specification designed for your requirements.

ARTICLE COM4-4BPF-AG00


IMPEDANCE 50 Ohm

NARROWBAND INPUT

MAX INPUT POWER 30 W rms


INPUT CONNECTOR N female (male available on request

INSERTION LOSS


±3.8 MHz <1.0 dB

±4.2 MHz >1.0 dB

±6.0 MHz >4 dB

±12.0 MHz >28 dB

WIDEBAND INPUT

INPUT VSWR >23 dB 2 specified channels

INPUT CONNECTOR N female (male available on request)

INSERTION LOSS

±24 MHz <0.20 dB

±16 MHz <0.25 dB

±8 MHz <0.80 dB




±4-12 MHz from narrowband Cf >30 dB

±12-20 MHz from narrowband Cf >50 dB

±>20 MHz from narrowband Cf >60 dB

MINIMUM CHANNEL SPACING 1 free Channel

OUTPUT

MAXIMUM OUTPUT POWER 150 W rms

OUTPUT CONNECTOR N female (male available on request)



L x W x H (11 x 8.7 x 1.7 in)

WEIGHT 2.6 kg (5,7 lb)

Revision A 19


UHF Manifold Combiner50 W rms, with 3 and 4 Pole filters

PRODUCT FEATURES

�� Very cost efficient

�� Small size

�� UHF band tunable


�� 6, 7 and 8 MHz channel bandwidth tunable

�� Possible to fit in 19”

PRODUCT PROFILE

Exir Broadcasting Manifold combiners are very depend-

able and provide a cost-effective alternative for com-

bining without couplers.

TYPICAL DATA BPF4-3C04-AB00 BPF4-4C04-AB00

3 POLE 4 POLE



NARROWBAND INPUT

MAX INPUT POWER 50 W rms 50 W rms

INPUT VSWR <1.1 (>26 dB) <1.1 (>26 dB)

INPUT CONNECTOR N female N female

INSERTION LOSS


± 3.8 MHz <0.85 dB <1.2 dB

± 4.2 MHz >0.95 dB <1.3 dB

± 6.0 MHz >1.2 dB <3.4 dB

± 12.0 MHz >10.0 dB <25.0 dB

± 20.0 MHz >20.0 dB <35.0 dB

ISOLATION

Ch. spacing 1 free ch. >30 dB

Ch. spacing 2 free ch. >30 dB >36 dB

>3 free ch >36 dB >40 dB

MINIMUM CHANNEL SPACING 2 free channels 1 free channel

MAXIMUM NO OF CHANNEL 6 (more on request) 6 (more on request)

MAXIMUM OUTPUT POWER 480 W rms 480 W rms

OUTPUT CONNECTOR N female N female


ARTICLE COM4-MAN2-AA00 COM4-MAN4-AA00 COM4-MAN5-AA00 COM4-MAN10-AA00

HEIGHT 1U 2U 3U 3U

DEPTH <400 mm <400 mm <400 mm <400 mm

WIDTH 19” 19” 19” 19”

MAX NUMBER OF FILTERS 2 4 5 10

WEIGHT PER FILTER ~1,3 ~1,3 ~1,3 ~1,3

Output

Input 1 Input 2 Input 3 Input n



Revision A20

COM4-MAN10-AA00 with 3 Pole filter



BAND III

BAND III



ationFilters

Combiners


ation

UHF Constance Impedance Combiner1.3 kW rms, 4 Pole



BANDWIDTH 6 - 8 MHz



APPLICATION One guard Ch combining





IMPEDANCE 50 Ohm



MAX OUTPUT POWER RATING* 1.8 kW rms

NB STANDARD INPUT CONNECTOR 7/8” unflange

NB OPTIONAL INPUT CONNECTORS 7/16 f/m, N f/m

WB STANDARD INPUT CONNECTOR 7/8” unflange

WB OPTIONAL INPUT CONNECTORS 7/16 f/m, N f/m

STANDARD OUTPUT CONNECTOR 7/8” unflange

OPTIONAL OUTPUT CONNECTORS 7/16 f/m, N f/m





ARTICLE NO CI4-4C05-0NAA777 CI4-4C05-0NAA777 CI4-4C05-0NAA777

NB INSERTION LOSS







WB INSERTION LOSS



± 8.0 MHz <0.30 dB ± 6 MHz <0.40 dB ± 6 MHz <0.85 dB

ISOLATION




± 8.0 MHz >45 dB ± 6 MHz >45 dB ± 6 MHz >45 dB




NB MAX INPUT POWER RATING** 1.3 kW / 13 dB (crest factor) 1.1 kW / 13 dB (crest factor) 1.2 kW / 11 dB (crest factor)




Revision B


DIMENSIONS 480 x 483 x 133 mm (3U)

L x W x H (18.9 x 19 x 5.2 in)


FRAME 19” subrack

COLOUR Anodised aluminium

Temperature rise / Avg. attenuationCI4-4C05-XXXXXXX

BAND IV-V

SPECIFICATIONS 50 mm series OptionFREQUENCY 470 - 862 MHz -BANDWIDTH 6 - 8 MHz -

ORDER 4 Poles4 Poles single cross coupling

APPLICATIONOne guard Ch combining -

ATV Spurious supress -DVB Spurious supress -ATSC Non stringent mask -ISDB Spurious supress -IMPEDANCE 50 Ohm -

NB RETURN LOSS (VSWR) >26 dB (1,11) -

WB RETURN LOSS (VSWR)>30 dB (1,07) 2 Specified Ch -

MAX OUTPUT POWER RATING* 1.8 kW rms -

NB INPUT CONNECTORS EIA 7/8" female7/16-m, N-f/m, EIA 7/8"-f/m

WB INPUT CONNECTORS EIA 7/8" female7/16-m, N-f/m, EIA 7/8"-f/m

OUTPUT CONNECTORS EIA 7/8" female

7/16-m, N-f/m, EIA 7/8"-f/m

TEMPERATUR STABILITY <2 kHz / °C -MAX OPERATING 70 °C -ENVIROMENTAL -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 480x483x133 (3U) -(Inch) (18.9x19x5.2 in) -WEIGHT 15 kg (33 lb) -FRAME 19" subrack -COLOUR Anodised Aluminium -

TYPICAL DATA ** 8 MHz DVB-T 7 MHz DVB-T 6 MHz DVB-TART. NO. COM4-4C05-00N0 COM4-4C05-00N0 COM4-4C05-00N0NB INSERTION LOSSAvg. signal bandwidth <0.5 dB <0.65 dB <0.6 dBCentre frequency <0.5 dB <0.6 dB <0,55 dBSignal band edge ± 3.8 MHz <0.6 dB ± 2.79 MHz <0.75 dB ± 2.69 MHz <0,65 dB


WB INSERTION LOSS± 24 MHz <0.1 dB ± 18 MHz <0.1 dB ± 18 MHz <0.1 dB± 16 MHz <0.1 dB ± 12 MHz <0.1 dB ± 12 MHz <0.1 dB± 8.0 MHz <0.3 dB ± 6 MHz <0.4 dB ± 6 MHz <0.85 dB± 4.2 MHz - ± 3.21 MHz - ± 3.31 MHz -

ISOLATIONNARROWBAND - WIDEBAND >36 dB >36 dB >36 dBWIDEBAND - NARROWBAND @

± 4.2 MHz >36 dB ± 3.21 MHz >36 dB ± 3.31 MHz >36 dB± 8.0 MHz >45 dB ± 6 MHz >45 dB ± 6 MHz >40 dB± 16 MHz >70 dB ± 12 MHz >70 dB ± 12 MHz >65 dB± 24 MHz >85 dB ± 18 MHz >85 dB ± 18 MHz >80 dB

NB GROUP DELAY VARIATION <20 ns <25 ns <15 nsNB MAX INPUT POWER RATING* 1.4 kW / 13 dB (crest factor) 1.1 kW / 13 dB (crest factor) 1.2 kW / 11 dB (crest factor)TEMPERATURE RISE <3,0 °C / 100 W <4,0 °C / 100 W <3,5 °C / 100 WMask compliant Spurious supress Spurious supress Non stringent mask

UHF Constant impedance combiner

** Data in table is typical data at 666 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The filter can be tuned for other specification or b d d h l f f d d

1.4 kW rms 4 poles

* Max power rating at < 50 °C temprice at max frequency


0

1

2

3

4

5

6

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C05-XXNX




BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-4C05-0NAA 777CI = Combiner type4 = Frequency band


0 = Number of cross couplingN = CoatingA = Narrowband coupler A = Wideband coupler

7 = Narrowband connection 7 = Wideband connection 7 = Output connection

21





BANDWIDTH 6 - 8 MHz



APPLICATION Adjacent Ch combining



ATSC Stringent mask


IMPEDANCE 50 Ohm















NB INSERTION LOSS

Avg. signal bandwidth <0.80 dB <0.90 dB <1 dB






WB INSERTION LOSS




ISOLATION






± 24 MHz >80 dB ± 18 MHz >85 dB ± 18 MHz >95 dBNB GROUP DELAY VARIATION <210 ns <85 ns <75 nsNB MAX INPUT POWER RATING** 1.3 kW / 13 dB (crest factor) 1.1 kW / 13 dB (crest factor) 1.0 kW / 11 dB (crest factor)



Revision B



L x W x H (23.1 x 19 x 5.2 in)


FRAME 19” subrack


BAND IV-V


ORDER6 Poles double cross coupling

6 Poles with or without single cross coupling

APPLICATIONAdjacent Ch combining -

ATV Spurious supress -DVB Non critical mask -ATSC Stringent mask -ISDB Non critical mask -IMPEDANCE 50 Ohm -







7/16-m, N-f/m, EIA 7/8"-f/m

TEMPERATUR STABILITY <2 kHz / °C -

PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 586x483x133 (3U) -(Inch) (23.1x19x5.2 in) -WEIGHT 17 kg (37.5 lb) -FRAME 19" subrack -COLOUR Anodised Aluminium -

TYPICAL DATA ** 8 MHz DVB-T 7 MHz DVB-T 6 MHz DVB-TART. NO. COM4-6C05-2CN0 COM4-6C05-2CN0 COM4-6C05-2CN0NB INSERTION LOSSAvg. signal bandwidth <0.8 dB <0.9 dB <1.0 dBCentre frequency <0.65 dB <0.75 dB <0.9 dBSignal band edge ± 3.8 MHz <1.6 dB ± 2.79 MHz <1.35 dB ± 2.69 MHz <1.25 dB





NB GROUP DELAY VARIATION <210 ns <85 ns <75 nsNB MAX INPUT POWER RATING* 1.3 kW / 13 dB (crest factor) 1.1 kW / 13 dB (crest factor) 1.0 kW / 11 dB (crest factor)TEMPERATURE RISE <3,5 °C / 100 W <4,0 °C / 100 W <4,5 °C / 100 WMask compliant Non critical mask Non critical mask Stringent mask

UHF Constant impedance combiner1.3 kW rms 6 poles



0

1

2

3

4

5

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-6C05-XXNX



BAND IV-V












7/16-m, N-f/m, EIA 7/8"-f/m


PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 586x483x133 (3U) -(Inch) (23.1x19x5.2 in) -WEIGHT 17 kg (37.5 lb) -FRAME 19" subrack -COLOUR Anodised Aluminium -






NB GROUP DELAY VARIATION <210 ns <85 ns <75 nsNB MAX INPUT POWER RATING* 1.3 kW / 13 dB (crest factor) 1.1 kW / 13 dB (crest factor) 1.0 kW / 11 dB (crest factor)TEMPERATURE RISE <3,5 °C / 100 W <4,0 °C / 100 W <4,5 °C / 100 WMask compliant Non critical mask Non critical mask Stringent mask

UHF Constant impedance combiner1.3 kW rms 6 poles



0

1

2

3

4

5

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-6C05-XXNX




BAND III

BAND III

Wide-

Narrow-

Out-




7 = Narrowband connection7 = Wideband connection 7 = Output connection


22



ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz





DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm















NB INSERTION LOSS


Centre frequency <0.90 dB <1.25 dB <1 dB





WB INSERTION LOSS




ISOLATION






± 24 MHz >110 dB ± 18 MHz >110 dB ± 18 MHz >110 dBNB GROUP DELAY VARIATION <360 ns <450 ns <80 nsNB MAX INPUT POWER RATING** 1.1 kW / 13 dB (crest factor) 900 W / 13 dB (crest factor) 1.2 kW / 11 dB (crest factor)



Revision B



L x W x H (27.2 x 19 x 5.2 in)


FRAME 19” subrack


BAND IV-V





ATV Spurious supress -DVB Critical mask -ATSC Stringent mask -ISDB Critical mask -IMPEDANCE 50 Ohm -







7/16-m, N-f/m, EIA 7/8"-f/m


PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 690x483x133 (3U) -(Inch) (27.2x19x5.2 in) -WEIGHT 20 kg 44 lb) -FRAME 19" subrack -COLOUR Anodised Aluminium -






NB GROUP DELAY VARIATION <360 ns <450 ns <80 nsNB MAX INPUT POWER RATING* 1.1 kW / 13 dB (crest factor) 900 W / 13 dB (crest factor) 1.2 kW / 11 dB (crest factor)TEMPERATURE RISE <4,0 °C / 100 W <5,0 °C / 100 W <3,5 °C / 100 WMask compliant Critical mask Critical mask Stringent mask


** Data in table is typical data at 666 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The combiner can be tuned for other f b d d h l f f d d

1.1 kW rms 8 poles



0

0,5

1

1,5

2

2,5

3

3,5

4

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C05-XXNX


BAND IV-V












7/16-m, N-f/m, EIA 7/8"-f/m











1.1 kW rms 8 poles



0

0,5

1

1,5

2

2,5

3

3,5

4

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C05-XXNX


BAND IV-V












7/16-m, N-f/m, EIA 7/8"-f/m











1.1 kW rms 8 poles



0

0,5

1

1,5

2

2,5

3

3,5

4

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C05-XXNX





BAND III

BAND III

Widebandinput

Narrowbandinput

Output






23


UHF Constance Impedance Combiner6 kW rms, 4 Pole



BANDWIDTH 6 - 8 MHz








IMPEDANCE 50 Ohm



MAX OUTPUT POWER RATING 15 kW rms

NB INPUT CONNECTOR 1 5/8” unflange

WB STANDARD INPUT CONNECTOR 3 1/8” unflange

WB OPTIONAL INPUT CONNECTOR 1 5/8” unflange


OPTIONAL OUTPUT CONNECTOR 1 5/8” unflange





ARTICLE NO CI4-4C14-0PBB133 CI4-4C14-0PBB133 CI4-4C14-0PBB133

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION









Revision A



L x W x H (26.6 x 17.5 x 23.9 in)



OPTIONAL FRAME 19” rack

COLOUR Black and aluminium



BAND III

BAND III

Widebandinput

Narrowbandinput

Output

BAND IV-V







MAX OUTPUT POWER RATING* 15 kW rms -

NB INPUT CONNECTORS 1 5/8" unflange -

WB INPUT CONNECTORS 3 1/8" unflange 1 5/8" unflangeOUTPUT CONNECTORS 3 1/8" unflange 1 5/8" unflangeTEMPERATUR STABILITY <2 kHz / °C -

PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 676x445x607 mm -(Inch) (26.6x17.5x23.9 in) -WEIGHT 76 kg (167.5 lb) -FRAME Stand alone 19" rackCOLOUR Black & Aluminium -

TYPICAL DATA ** 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSCART. NO. COM4-4C05-00S0 COM4-4C05-00S0 COM4-4C05-00S0NB INSERTION LOSSAvg. signal bandwidth <0,26 dB <0,31 dB <0,29 dB

Centre frequency <0,26 dB <0,31 dB <0,29 dB





WB INSERTION LOSS± 24 MHz <0,10 dB ± 18 MHz <0,10 dB ± 18 MHz <0,10 dB

± 16 MHz <0,10 dB ± 12 MHz <0,10 dB ± 12 MHz <0,10 dB

± 8.0 MHz <0,40 dB ± 6 MHz <0,45 dB ± 6 MHz <0,70 dB

ISOLATIONNARROWBAND - WIDEBAND >36 dB >36 dB >36 dB

WIDEBAND - NARROWBAND @± 4.2 MHz >36 dB ± 3.21 MHz >36 dB ± 3.31 MHz >36 dB





NB MAX INPUT POWER RATING* 6 kW / 13 dB (crest factor) 6 kW / 13 dB (crest factor) 6 kW / 11 dB (crest factor)TEMPERATURE RISE <0,5 °C / 100 W <0,6 °C / 100 W <0,6 °C / 100 WMask compliant Spurious supress Spurious supress Non stringent mask

Issue P12


** Data in table is typical data at 666 MHz. To fulfil mask transmitter shoulder level must be >36 dB. The combiner can be tuned for other specification or bandwidth, pleas contact us for a specification designed

6 kW rms 4 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

1,1

1,2

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C14-XXSX

Här skulle vara fint med ett foto på combiner med svarta filter


Temperature rise / Avg. attenuationCI4-4C14-xxxxxxx

ARTICLE: CI4-4C14-0PBB 133CI = Combiner type4 = Frequency band


0 = Number of cross couplingP = CoatingB = Narrowband coupler B = Wideband coupler



24



ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz








IMPEDANCE 50 Ohm













ARTICLE NO CI4-4C14-0NBB133 CI4-4C14-0NBB133 CI4-4C14-0NBB133

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION











Revision B



L x W x H (26.6 x 17.5 x 23.9 in)



OPTIONAL FRAME 19” rack




BAND III

BAND III

Widebandinput

Narrowbandinput

Output

BAND IV-V



























Issue P12



6 kW rms 4 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

1,1

1,2

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C14-XXSX




ARTICLE: CI4-4C14-0NBB 133CI = Combiner type4 = Frequency band


0 = Number of cross couplingN = CoatingB = Narrowband coupler B = Wideband coupler



25





BANDWIDTH 6 - 8 MHz






ATSC Stringent mask


IMPEDANCE 50 Ohm







STANDARD OUTPUT CONNECTOR 3 1/8” unflang






ARTICLE NO CI4-6C14-1PBC133 CI4-6C14-1PBC133 CI4-6C14-1PBC133

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION











Revision A



L x W x H (26.6 x 17.5 x 29.6 in)



FRAME 19” rack


BAND IV-V


ORDER6 Poles single cross coupling










TYPICAL DATA ** 8 MHz DVB-T 6 MHz ISDB-T 6 MHz ATSCART. NO. COM4-6C05-1CS0 COM4-6C05-1CS0 COM4-6C05-1CS0NB INSERTION LOSSAvg. signal bandwidth <0,42 dB <0,50 dB <0,50 dB















NB MAX INPUT POWER RATING* 6 kW / 13 dB (crest factor) 4.8 kW / 13 dB (crest factor) 4.8 kW / 11 dB (crest factor)TEMPERATURE RISE <0,7 °C / 100 W <0,8 °C / 100 W <0,8 °C / 100 WMask compliant Non critical mask Non critical mask Stringent mask


TECHNICAL PRODUCT SHEET 50 mm family

6 kW rms 6 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

1,1

1,2

1,3

1,4

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8

Attenuation [dB]Te

mpe

ratu

re ri

se [°

C/1

00W

]

COM4-6C14-XXSX





BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-6C14-1PBC 133CI = Combiner type4 = Frequency band


1 = Number of cross couplingP = CoatingB = Narrowband coupler C = Wideband coupler



26



ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz






ATSC Stringent mask


IMPEDANCE 50 Ohm







STANDARD OUTPUT CONNECTOR 3 1/8” unflang






ARTICLE NO CI4-6C14-1NBC133 CI4-6C14-1NBC133 CI4-6C14-1NBC133

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION











Revision B



L x W x H (26.6 x 17.5 x 29.6 in)



FRAME 19” rack


BAND IV-V



























NB MAX INPUT POWER RATING* 6 kW / 13 dB (crest factor) 4.8 kW / 13 dB (crest factor) 4.8 kW / 11 dB (crest factor)TEMPERATURE RISE <0,7 °C / 100 W <0,8 °C / 100 W <0,8 °C / 100 WMask compliant Non critical mask Non critical mask Stringent mask



6 kW rms 6 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

1,1

1,2

1,3

1,4

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-6C14-XXSX





BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-6C14-1NBC 133CI = Combiner type4 = Frequency band


1 = Number of cross couplingN = CoatingB = Narrowband coupler C = Wideband coupler



27





BANDWIDTH 6 - 8 MHz

STANDARD ORDER 8 Poles with single cross coupling

OPTIONAL ORDER 8 Poles without cross coupling, with double cross coupling



DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm













ARTICLE NO CI4-8C14-1PBC133 CI4-8C14-1PBC133 CI4-8C14-1PBC133

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION









Revision A



L x W x H (26.6 x 17.5 x 35.3 in)




BAND IV-V


ORDER 8 Poles

























NB MAX INPUT POWER RATING* 5.4 kW / 13 dB (crest factor) 4.8 kW / 13 dB (crest factor) 5.6 kW / 11 dB (crest factor)TEMPERATURE RISE <0,7 °C / 100 W <0,9 °C / 100 W <0,7 °C / 100 WMask compliant Critical mask Critical mask Stringent mask

Issue P12



5.4 kW rms 8 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

1,1

1,2

1,3

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C14-XXSX





BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-8C14-1PBC 133CI = Combiner type4 = Frequency band


1 = Number of cross couplingP = CoatingB = Narrowband coupler C = Wideband coupler



28



ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz

STANDARD ORDER 8 Poles with single cross coupling

OPTIONAL ORDER 8 Poles without cross coupling, with double cross coupling



DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm













ARTICLE NO CI4-8C14-1NBC133 CI4-8C14-1NBC133 CI4-8C14-1NBC133

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION









Revision B



L x W x H (26.6 x 17.5 x 35.3 in)




BAND IV-V


ORDER 8 Poles

























NB MAX INPUT POWER RATING* 5.4 kW / 13 dB (crest factor) 4.8 kW / 13 dB (crest factor) 5.6 kW / 11 dB (crest factor)TEMPERATURE RISE <0,7 °C / 100 W <0,9 °C / 100 W <0,7 °C / 100 WMask compliant Critical mask Critical mask Stringent mask

Issue P12



5.4 kW rms 8 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

1,1

1,2

1,3

0,1 0,2 0,3 0,4 0,5 0,6 0,7 0,8 0,9 1

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C14-XXSX





BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-8C14-1NBC 133CI = Combiner type4 = Frequency band


1 = Number of cross couplingN = CoatingB = Narrowband coupler C = Wideband coupler



29





BANDWIDTH 6 - 8 MHz








IMPEDANCE 50 Ohm





WB STANDARD INPUT CONNECTOR NAX120

WB OPTIONAL INPUT CONNECTORS 3 1/8” unflange, RL98 unflange

STANDARD OUTPUT CONNECTOR NAX120

OPTIONAL OUTPUT CONNECTORS 3 1/8” unflange, RL98 unflange





ARTICLE NO CI4-4C20-0PCE322 CI4-4C20-0PCE322 CI4-4C20-0PCE322

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION






± 24 MHz >85 dB ± 18 MHz >85 dB ± 18 MHz >80 dBNB GROUP DELAY VARIATION <25 ns <30 ns <15 nsNB MAX INPUT POWER RATING** 10 kW / 13 dB (crest factor) 8.4 kW / 13 dB (crest factor) 9.4 kW / 11 dB (crest factor)



Revision A



L x W x H (28.2 x 23.4 x 31 in)


FRAME Stand alone


BAND IV-V









WB INPUT CONNECTORS NAX 1203 1/8" unflange, RL 98 unflange

OUTPUT CONNECTORS NAX 120

3 1/8" unflange, RL 98 unflange


PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 716x595x787 mm -(Inch) (28.2x23.4x31 in) -WEIGHT 110 kg (242.5 lb) -FRAME Stand alone -COLOUR Black & Aluminium -

















Issue P12



10 kW rms 4 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C20-XXSX






BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-4C20-0PCE 322CI = Combiner type4 = Frequency band


0 = Number of cross couplingp = CoatingC = Narrowband coupler E = Wideband coupler



30



ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz








IMPEDANCE 50 Ohm













ARTICLE NO CI4-4C20-0NCE322 CI4-4C20-0NCE322 CI4-4C20-0NCE322

NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION






± 24 MHz >85 dB ± 18 MHz >85 dB ± 18 MHz >80 dBNB GROUP DELAY VARIATION <25 ns <30 ns <15 nsNB MAX INPUT POWER RATING** 10 kW / 13 dB (crest factor) 10 kW / 13 dB (crest factor) 14 kW / 11 dB (crest factor)



Revision B



L x W x H (28.2 x 23.4 x 31 in)


FRAME Stand alone


BAND IV-V













PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 716x595x787 mm -(Inch) (28.2x23.4x31 in) -WEIGHT 110 kg (242.5 lb) -FRAME Stand alone -COLOUR Black & Aluminium -

















Issue P12



10 kW rms 4 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,7

0,8

0,9

1

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C20-XXSX






BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-4C20-0NCE 322CI = Combiner type4 = Frequency band


0 = Number of cross couplingN = CoatingC = Narrowband coupler E = Wideband coupler



31





BANDWIDTH 6 - 8 MHz






ATSC Stringent mask


IMPEDANCE 50 Ohm














NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION













L x W x H (28.2 x 23.4 x 39 in)




BAND IV-V














PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 992x595x787 mm -(Inch) (39x23.4x31 in) -WEIGHT 115 kg (253.5 lb) -FRAME Stand alone -COLOUR Black & Aluminium -
















NB MAX INPUT POWER RATING* 10 kW / 13 dB (crest factor) 9.6 kW / 13 dB (crest factor) 10 kW / 11 dB (crest factor)TEMPERATURE RISE <0,4 °C / 100 W <0,5 °C / 100 W <0,4 °C / 100 WMask compliant Non critical mask Non critical mask Stringent mask



10 kW rms 6 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C20-XXSX



Temperature rise / Avg. attenuation CI4-6C20-xxxxxxx



BAND III

BAND III

Widebandinput

Narrowbandinput

Output

Revision A


32

ARTICLE: CI4-6C20-1PCE 322CI = Combiner Type4 = Frequency band


1 = Number of cross couplingP = CoatingC = Narrowband coupler E = Wideband coupler




ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz






ATSC Stringent mask


IMPEDANCE 50 Ohm














NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION








NB MAX INPUT POWER RATING** 10 kW / 13 dB (crest factor) 9.6 kW / 13 dB (crest factor) 10 kW / 11 dB (crest factor)





L x W x H (28.2 x 23.4 x 39 in)




BAND IV-V














PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 992x595x787 mm -(Inch) (39x23.4x31 in) -WEIGHT 115 kg (253.5 lb) -FRAME Stand alone -COLOUR Black & Aluminium -
















NB MAX INPUT POWER RATING* 10 kW / 13 dB (crest factor) 9.6 kW / 13 dB (crest factor) 10 kW / 11 dB (crest factor)TEMPERATURE RISE <0,4 °C / 100 W <0,5 °C / 100 W <0,4 °C / 100 WMask compliant Non critical mask Non critical mask Stringent mask



10 kW rms 6 poles



0

0,1

0,2

0,3

0,4

0,5

0,6

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-4C20-XXSX



Temperature rise / Avg. attenuation CI4-6C20-xxxxxxx



BAND III

BAND III

Widebandinput

Narrowbandinput

Output

Revision B

ARTICLE: CI4-6C20-1NCE 322CI = Combiner Type4 = Frequency band





33





BANDWIDTH 6 - 8 MHz





DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm








OPTIONAL OUTPUT CONNECTOR 3 1/8” unflange, RL98 unflange






NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION











Revision A



L x W x H (28.2 x 23.4 x 47.1 in)




BAND IV-V














PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 1197x595x787 mm -(Inch) (47,1x23.4x31 in) -WEIGHT 125 kg (275.6 lb) -FRAME Stand alone -COLOUR Black & Aluminium -
















NB MAX INPUT POWER RATING* 10 kW / 13 dB (crest factor) 8.4 kW / 13 dB (crest factor) 10.8 kW / 11 dB (crest factor)TEMPERATURE RISE <0,4 °C / 100 W <0,5 °C / 100 W <0,4 °C / 100 WMask compliant Critical mask Critical mask Stringent mask



10 kW rms 8 poles



0

0,1

0,2

0,3

0,4

0,5

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C20-XXSX






BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-8C20-1PCE 322CI = Combiner type4 = Frequency band


1 = Number of cross couplingP = CoatingC = Narrowband coupler E = Wideband coupler



34



ationFilters

Combiners


ation




BANDWIDTH 6 - 8 MHz





DVB Critical mask

ATSC Stringent mask

ISDB Critical mask

IMPEDANCE 50 Ohm








OPTIONAL OUTPUT CONNECTOR 3 1/8” unflange, RL98 unflange






NB INSERTION LOSS







WB INSERTION LOSS




ISOLATION









Revision B



L x W x H (28.2 x 23.4 x 47.1 in)




BAND IV-V














PRODUCT TEMPERATURE 70 °C -ENVIROMENTAL CONDITION -5 to 70 °C IP40 -DIMENSIONS ( L X W X H ) 1197x595x787 mm -(Inch) (47,1x23.4x31 in) -WEIGHT 125 kg (275.6 lb) -FRAME Stand alone -COLOUR Black & Aluminium -
















NB MAX INPUT POWER RATING* 10 kW / 13 dB (crest factor) 8.4 kW / 13 dB (crest factor) 10.8 kW / 11 dB (crest factor)TEMPERATURE RISE <0,4 °C / 100 W <0,5 °C / 100 W <0,4 °C / 100 WMask compliant Critical mask Critical mask Stringent mask



10 kW rms 8 poles



0

0,1

0,2

0,3

0,4

0,5

0,1 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5

Attenuation [dB]

Tem

pera

ture

rise

[°C

/100

W]

COM4-8C20-XXSX






BAND III

BAND III

Widebandinput

Narrowbandinput

Output

ARTICLE: CI4-8C20-1NCE 322CI = Combiner type4 = Frequency band





35


UHF Constant Impedance Combiner24 and 30 kW rms, 3 Cavities

PRODUCT FEATURES�� Flexible modular design�� High isolation�� Low insertion loss�� Dry loads�� Convection cooled�� Suitable for use with IOT or solid state

transmitter in combined operation for vision/sound to eliminate out-of-band products


PRODUCT PROFILEFor channel combining applications only, this cost-effec-tive unit will combine digital or analogue channels that are already mask compliant. The waveguide single-mode filters provide high isolation with low insertion loss in a very compact assembly. The unit is available with hy-brids for higher power and NAX 120 connections.

* Maximum output power with optional output connector NAX120 unflange is 36 kW rms.

Data in table is typical according to a standard tuned 8 MHz channel bandwidth. The combiner can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements. All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation. The maximum output power is specified at 600 MHz.

Revision A36



BAND III

BAND III

ARTICLE COM4-3CWG-A001 COM4-3WGF-AA00 COM4-3WGF-AC00 COM4-3WGF-AD00



NARROWBAND INPUT

MAXIMUM INPUT POWER 24 kW rms 24 kW rms 30 kW rms 30 kW rms



INSERTION LOSS


±3.8 MHz <0.1 dB <0.1 dB <0.1 dB <0.1 dB

±4.2 MHz <0.1 dB <0.1 dB <0.1 dB <0.1 dB

±6.0 MHz >0.6 dB >0.6 dB >0.6 dB >0.6 dB

±12.0 MHz >10 dB >10 dB >10 dB >10 dB

WIDEBAND INPUT





STANDARD INPUT CONNECTOR RL98 unflange RL98 unflange RL98 unflange RL98 unflange

OPTIONAL INPUT CONNECTORS NAX120 unflange NAX120 unflange

INSERTION LOSS

±24 MHz <0.05 dB <0.05 dB <0.05 dB <0.05 dB

±16 MHz <0.05 dB <0.05 dB <0.05 dB <0.05 dB

±8 MHz <1.4 dB <1.4 dB <1.4 dB <1.4 dB

ISOLATION



±8 MHz from narrowband Cf >36 dB >36 dB >36 dB >36 dB


MINIMUM CHANNEL SPACING 2 free channels 2 free channels 2 free channels 2 free channels

OUTPUT

MAXIMUM OUTPUT POWER 30 kW rms 30 kW rms* 30 kW rms 30 kW rms*

STANDARD OUTPUT CONNECTOR RL98 unflange RL98 unflange RL98 unflange RL98 unflange

OPTIONAL OUTPUT CONNECTORS NAX120 unflange NAX120 unflange



L x W x H (38.6 x 26.2 x 39.4 in) acc. to ch.

(38.6 x 26.2 x 39.4 in) acc. to ch.

(38.6 x 26.2 x 39.4 in) acc. to ch.

(38.6 x 26.2 x 39.4 in) acc. to ch.

WEIGHT ~150 kg (330 lb) ac-cording to channel

~150 kg (330 lb) ac-cording to channel

~150 kg (330 lb) according to channel

~150 kg (330 lb) according to channel

OTHER Equipped with high power/voltage output coupler

Black painted with cooling fins. Black painted with cooling fins. Equipped with high power/voltage output coupler



ationFilters

Combiners


ation

All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation. The maximum output power is specified at 600 MHz.


Below data is typical according to a standard tuned 8 MHz channel bandwidth. The combiner can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements.

Revision A 37

UHF Constant Impedance Combiner24 and 30 kW rms, 6 CavitiesPRODUCT FEATURES�� Flexible modular design�� High isolation�� Low insertion loss�� Dry loads�� Convection cooled�� Available with temperature com-

pensation �� 10-year comprehensive warranty

ARTICLE STANDARD COM4-6CWG-A001 COM4-6WGF-AA00

WITH TEMPERATURE COMPENSATION COM4-6WGF-AI00 COM4-6WGF-AB00



NARROWBAND INPUT




INSERTION LOSS


±3.8 MHz <0.4 dB <0.4 dB <0.4 dB <0.4 dB

±4.2 MHz >1.8 dB >1.8 dB >1.8 dB >1.8 dB

±6.0 MHz >24 dB >24 dB >24 dB >24 dB

±12.0 MHz >64 dB >64 d >64 dB >64 dB

WIDEBAND INPUT

INPUT VSWR <1.05 (>32 dB) 2 specified channels

<1.05 (>32 dB) 2 specified channels




OPTIONAL INPUT CONNECTORS NAX120 unflange NAX120 unflange

INSERTION LOSS

±24 MHz 0.05 dB 0.05 dB 0.05 dB 0.05 dB

±16 MHz 0.05 dB 0.05 dB 0.05 dB 0.05 dB

±8 MHz 0.1 dB 0.1 dB 0.1 dB 0.1 dB




±8 MHz from narrowband Cf <60 dB <60 dB <60 dB <60 dB

±24 MHz from narrowband Cf <80 dB <80 d <80 dB <80 dB

MINIMUM CHANNEL SPACING 1 free channel 1 free channel 1 free channel 1 free channel

OUTPUT



OPTIONAL OUTPUT CONNECTORS NAX120 NAX120



L x W x H (65 x 26.2 x 39.4 in) acc. to channel

(65 x 26.2 x 39.4 in) acc. to channel



WEIGHT 200±25 kg (440±55 lb) 200±25 kg (440±55 lb) 200±25 kg (440±55 lb) 200±25 kg (440±55 lb)

Equipped with high power/voltage output coupler

Equipped with high power/voltage output coupler

PRODUCT PROFILEWaveguide single mode filters employ all the advantages of low losses and high rejection characteristics to provide adjacent channel com-bining and mask filtering in the same assembly. Suitable for input digital powers up to 30 kW and Peak Sync analogue powers up to 40 kW these versatile units have become the one of our most popular filter/combiner combinations.



BAND III

BAND III

Exir Broadcasting P +46 415 164 00 F +46 415 166 01 [email protected] www.exirbroadcasting.com Revision A38

Widebandinput

Narrowbandinput

Output

ARTICLE STANDARD

WITH TEMPERATURE COMPENSATION COM4-6WGF-AJ00 COM4-6WGF-AC00



NARROWBAND INPUT

MAX INPUT POWER 30 kW rms 30 kW rms

INPUT VSWR <1.1 (>26 dB) <1.1 (>26 dB)

INPUT CONNECTOR RL98 unflange RL98 unflange

INSERTION LOSS


±3.8 MHz <0.4 dB <0.4 dB

±4.2 MHz >1.8 dB >1.8 dB

±6.0 MHz >24 dB >24 dB

±12.0 MHz >64 dB >64 dB

WIDEBAND INPUT

INPUT VSWR <1.05 (>32 dB) 2 specified channels


STANDARD INPUT CONNECTOR RL98 unflange RL98 unflange

OPTIONAL INPUT CONNECTORS NAX120 unflange

INSERTION LOSS

±24 MHz 0.05 dB 0.05 dB

±16 MHz 0.05 dB 0.05 dB

±8 MHz 0.1 dB 0.1 dB




±8 MHz from narrowband Cf <60 dB <60 dB

±24 MHz from narrowband Cf <80 dB <80 dB

MINIMUM CHANNEL SPACING 1 free channel 1 free channel

OUTPUT

MAXIMUM OUTPUT POWER 30 kW rms 30 kW rms*

STANDARD OUTPUT CONNECTOR RL98 unflange RL98 unflange

OPTIONAL OUTPUT CONNECTORS NAX120



L x W x H (65 x 26.2 x 39.4 in) acc. to channel


WEIGHT 200±25 kg (440±55 lb) 200±25 kg (440±55 lb)

OTHER Black painted with cooling fins Black painted with cooling fins. Equipped with high power/voltage output coupler


PRODUCT FEATURES�� Flexible modular design�� High isolation�� Low insertion loss�� Dry loads�� Convection cooled�� Available with temperature com-

pensation �� 10-year comprehensive warranty

PRODUCT PROFILEWaveguide single mode filters employ all the advantages of low losses and high rejection characteristics to provide adjacent channel com-bining and mask filtering in the same assembly. Suitable for input digital powers up to 30 kW and Peak Sync analogue powers up to 40 kW these versatile units have become the one of our most popular filter/combiner combinations.



BAND III

BAND III

Data in table is typical according to a stan-dard tuned 8 MHz channel bandwidth. The combiner can be tuned for other specifica-tions or bandwidths, please contact us for a specification designed for your requirements. All average power values and technical data refer to an ambient temperature of +20-25°C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation. The maximum output power is specified at 600 MHz. * Maximum output power with optional output connector NAX120 unflange is 36 kW rms.



ationFilters

Combiners


ation

Revision A 39


PRODUCT FEATURES�� Flexible modular design�� 7 Cavities for sharp filtering�� High isolation�� Low insertion loss�� Dry loads�� Convection cooled�� Temperature compensated�� 10-year comprehensive warranty

ARTICLE COM4-7WGF-AA00 COM4-7WGF-AF00 COM4-7WGF-AB00 COM4-7WGF-AE00



NARROWBAND INPUT


INPUT VSWR <1.1 (<26 dB) <1.1 (<26 dB) <1.1 (<26 dB) <1.1 (<26 dB)


INSERTION LOSS


±3.8 MHz <0.6 dB <0.6 dB <0.6 dB <0.6 dB

±4.2 MHz >3.8 dB >3.8 dB >3.8 dB >3.8 dB

±6.0 MHz >33 dB >33 dB >33 dB >33 dB

±12.0 MHz >80 dB >80 dB >80 dB >80 dB

WIDEBAND INPUT

INPUT VSWR <1.05 (<32 dB) 2 specified channels

<1.05 (<32 dB) 2 specified channels




OPTIONAL INPUT CONNECTOR NAX 120 unflange NAX 120 unflange

INSERTION LOSS

±24 MHz 0.05 dB 0.05 dB 0.05 dB 0.05 dB

±16 MHz 0.05 dB 0.05 dB 0.05 dB 0.05 dB

±8 MHz 0.1 dB 0.1 dB 0.1 dB 0.1 dB






MINIMUM CHANNEL SPACING Adjacent Adjacent Adjacent Adjacent

OUTPUT



OPTIONAL OUTPUT CONNECTOR NAX 120 unflange NAX 120 unflange



L x W x H (78.5 x 26.2 x 39.4 in) acc. to channel

(78.5 x 26.2 x 39.4 in) acc. to channel



WEIGHT 225±25 kg (496±55 lb) 225±25 kg (496±55 lb) 225±25 kg (496±55 lb) 225±25 kg (496±55 lb)

OTHER Equiped with high power/voltage output coupler

Black painted with cooling fins Black painted with cooling fins, and equiped with high power/voltage output coupler



BAND III

BAND III

PRODUCT PROFILEThese 7 Cavities, single-mode, waveguide combin-ers employ the low-loss, high-power characteristics of waveguide technology with coaxial input and output. Ideal for analogue and digital transmitters, they provide high rejection and isolation in a sturdy, self-supporting, compact assembly. Available for 24 kW maximum input power or with black finish and cooling fins for handling up to 30 kW rms.

All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation. The maximum output power is specified at 600 MHz.


Below data is typical according to a standard tuned 8 MHz channel bandwidth. The combiner can be tuned for other specifications or bandwidths, please contact us for a specification designed for your requirements.


UHF Constant Impedance CombinerDual Digital/Analogue, 30 kW rms, 6 Cavities

PRODUCT FEATURES


�� 6 port U-link with splitter included

�� Combiner and mask filtering in the same unit



�� Dry loads

�� Convection cooling

�� Available with temperature compensation


PRODUCT PROFILE

Waveguide single mode filters employ all the advan-

tages of low losses and high rejection characteris-

tics to provide non-adjacent channel combining and

mask filtering in the same assembly. Suitable for

input digital powers up to 30 kW. These versatile

units have become the one of our most popular fil-

ter/combiner combinations.

ARTICLE COM4-6CWG-A002


IMPEDANCE 50 Ohm

NARROWBAND INPUT



INPUT CONNECTOR RL98 unflange

INSERTION LOSS


±3.8 MHz <0.4 dB

±4.2 MHz >1.8 dB

±6.0 MHz >24 dB

±12.0 MHz >64 dB

WIDEBAND INPUT


STANDARD INPUT CONNECTOR RL98 unflange

OPTIONAL INPUT CONNECTOR NAX120 unflange

INSERTION LOSS

±24 MHz 0.05 dB

±16 MHz 0.05 dB

±8 MHz 0.1 dB




±8 MHz from narrowband Cf <60 dB

±24 MHz from narrowband Cf <80 dB

MINIMUM CHANNEL SPACING 1 free channel

OUTPUT

MAXIMUM OUTPUT POWER 2 x 30 kW rms*

STANDARD OUTPUT CONNECTOR RL98 unflange

OPTIONAL OUTPUT CONNECTOR NAX120 unflange


DIMENSIONS 1688 x 1240 x 1510 mm acc. to channel


WEIGHT ~525kg (1157 lb)

Output

All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation. The maxi-mum output power is specified at 600 MHz.



Narrowbandinput Output

Widebandinput

Widebandinput

Revision A40



BAND III

BAND III



ationFilters

Combiners


ation

UHF Constant Impedance CombinerDual Digital/Analogue, 30 kW rms, 7 Cavities

PRODUCT FEATURES

�� 6 port U-link with splitter included

�� Combiner and mask filtering in the same unit



�� Dry loads

�� Convection cooling

�� Temperature compensation


PRODUCT PROFILE

Waveguide single mode filters employ all the ad-

vantages of low losses and high rejection charac-

teristics to provide adjacent channel combining and

mask filtering in the same assembly. Suitable for

input digital powers up to 30 kW. These versatile

units have become the one of our most popular fil-

ter/combiner combinations.

ARTICLE COM4-7WGF-AC00


IMPEDANCE 50 Ohm

NARROWBAND INPUT

MAX INPUT POWER 30 kW data rms at max frequency

INPUT VSWR <1.1 (<26 dB)

INPUT CONNECTOR RL98 unflange

INSERTION LOSS


±3.8 MHz <0.6 dB

±4.2 MHz >3.8 dB

±6.0 MHz >33 dB

±12.0 MHz >80 dB

WIDEBAND INPUT

INPUT VSWR <1.05 (<32 dB), 2 specified channels

STANDARD INPUT CONNECTOR RL98 unflange

OPTIONAL INPUT CONNECTOR NAX120 unflange

INSERTION LOSS

±24 MHz 0.05 dB

±16 MHz 0.05 dB

±8 MHz 0.1 dB




±8 MHz from narrowband Cf >60 dB

±24 MHz from narrowband Cf >80 dB

MINIMUM CHANNEL SPACING Adjacent

OUTPUT

MAXIMUM OUTPUT POWER 2 x 30 kW rms*

STANDARD OUTPUT CONNECTOR RL98 unflange

OPTIONAL OUTPUT CONNECTOR NAX120 unflange




WEIGHT 575±25 kg (1268±55 lb)

All average power values and technical data refer to an ambient temperature of + 20-25 °C with normal air flow. The product will have a maximum surface temperature of + 60 °C. Maximum power capacity may be lower depending on channel allocation. The maxi-mum output power is specified at 600 MHz.



Narrowbandinput Output

Widebandinput

Widebandinput

Revision A 41



BAND III

BAND III


Order and Sales InformationOrdering products from Exir Broadcasting is easy. Orders can be placed directly via telephone, fax or e-mail to our Head Office, or through our sales representatives located around the globe.

Direct OrderPHONE +46 415 164 00

FAX +46 415 166 01

E-MAIL [email protected]

42



ationFilters

Combiners


ation

Visit Exir Broadcasting´s website at www.exirbroadcasting.com for updated

product specifications, mounting descriptions, show dates and much more.

At www.exirbroadcasting.com you can submit technical questions via our e-mail

service as well as subscribe to our free quarterly customer magazine Frequencies,

which keeps you up-to-date with the latest developments at Exir Broadcasting

around the world.

Patch Panels & Splitters

Rigid Line,Accessories &Measurement Equipment

Antennas &QuickSite

TelecomBroadcastingCompany information

Filters & Combiners

www.exirbroadcasting.com

Other available publications

COMPANY PRESENTATION

FILTERS & COMBINERS


PATCH PANELS & SPLITTERSBroadcasting Products #

05

RIGID LINE, ACCESSORIES & MEASUREM

ENT EQUIPMET


ANTENNAS & QUICKSITEBroadcasting Products #

05


Reliability and High-Performance

Exir Broadcasting & Telecom ABSallerup 2120, SE-242 91 Hörby, Sweden

PHONE: +46 415 164 00

FAX: +46 415 164 01 E-MAIL: [email protected]

HOMEPAGE: www.exirbroadcasting.com

Documents

Filters and Combiners