file_0426be0cd068c2113bfaf8dd5a08f3bf4789b0bd

Brush Cutter

Parts Manual

Mfg. No. DescriptionModels

866014 SP33W, B&S Brush Cutter (2010)866018 SP43W, B&S Brush Cutter (2010)

Revision -Manual Part No. 1751790

Rev. Date: 1/24/2011

Table Of Contents

Torque Specification Chart ..................................................................... Inside Back Cover

PRODUCT COMPONENTS PAGESEngine Group - SP33W ....................................................................................................................................... 4Engine Group - SP43W ....................................................................................................................................... 10Main Unit .............................................................................................................................................................. 16

Engine Group - SP33WNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

866014e

The above parts group applies to the following Mfg. Nos.:

42011Milwaukee, WI, USA. All rights reserved© Copyright by Briggs & Stratton Corporation

866014 - SP33W

1751790

PART NO. DESCRIPTIONREF NO QTY.

Engine Group - SP33W

Footnotes

KIT, Air Cleaner Assembly, Complete (Includes Ref. Nos. 2, 24, 25 & 26) 1 700840 1KIT, Air Cleaner Assembly, Inner (Includes Ref. Nos. 27, 28, 29 & 30) 2 700806 1CARBUETOR 3 700808 1

KIT, Admitting Pipe (Includes Ref. Nos. 31, 32 & 33) 4 700324 1STARTER, Rewind 5 700809 1PAD, Starter 6 700329 1

KIT, Start Reel Assembly (Includes Ref. Nos. 34, 35, 36 & 37) 7 700330 1KIT, Shroud Assembly (Includes Ref. Nos. 38 & 39) 8 700810 1

KIT, Cylinder Assembly (Includes Ref. Nos. 10, 40 & 41) 9 700813 1KIT, Piston Group (Includes Ref. Nos. 42, 43, 44 & 45) 10 700335 1KIT, Crank Shaft Assembly (Includes Ref. Nos. 46, 47 & 48) 11 700815 1

KIT, Cylinder Case Assembly (Includes Ref. Nos. 49, 50, 51, 52 & 53) 12 700818 1KIT, Magneto Assembly (Includes Ref. Nos. 54, 55, 56 & 57) 13 700821 1KIT, Muffler Assembly (Includes Ref. Nos. 58 & 59) 14 700824 1

CORD 15 700827 1SPARK PLUG 16 700360 1COVER, Fan 17 700828 1

FLASH PAN 18 700362 1KIT, Expander Assembly (Inlcudes Ref. Nos. 60 & 61) 19 700829 1KIT, Fuel Tank Assembly (Includes Ref. Nos. 21, 22 & 62) 20 700830 1

KIT, Fuel Line Assembly (Includes Ref. Nos. 63, 64, 65 & 66) 21 700832 1

KIT, Fuel Cap Assembly (Includes Ref. Nos. 67, 68, 69, 70, 71 & 72) 22 701467 1BRACKET, Tank 23 700370 1

SCREW 24 700804 1

COVER, Cleaner, Outer 25 700805 1FILTER 26 700317 1

SCREW, Self Tapping, ST4.2 x 12 27 700319 1

CHOKE VALVE 28 700320 1HANDLE, Choke Valve 29 700807 1

COVER, Cleaner, Inner 30 700322 1

GASKET, Admitting Pipe 31 700325 1ADMITTING PIPE 32 700326 1

GASKET, Carbuetor 33 700327 1

STARTER CINCH (Not a serviceable part. Order Kit Ref. No 7) 34 ----- 2SPRING, Starter (Not a serviceable part. Order Kit Ref. No 7) 35 ----- 2

RING, Retainer (Not a serviceable part. Order Kit Ref. No 7) 36 ----- 2

STARTER BOX (Not a serviceable part. Order Kit Ref. No 7) 37 ----- 1SHROUD, Front 38 700762 1SHROUD, Rear 39 700812 1

CYLINDER 40 700814 1GASKET, Cylinder 41 700334 1RING, Pin Retain 42 700314 2

PIN, Piston 43 700337 1



866014 - SP33W

1751790


866014e



866014 - SP33W

1751790



Footnotes

RING, Piston 44 700338 2PISTON 45 700339 1KEY, 3 x 5 x 13 46 700341 1

BEARING, Needle 47 700816 1CRANKSHAFT 48 700817 1SEAL, Oil, 11.7 x 22 x 7 49 700345 2

BEARING, 6201/P6 50 700346 2GASKET, Crank Case 51 700347 1

CRANK CASE, Rear 52 700819 1CRANK CASE, Front 53 700820 1CLIP, Spark Plug 54 700351 1

BOOT, Spark Plug 55 700352 1MAGNETO COIL 56 700353 1FLY WHEEL 57 700354 1

GASKET, Muffler 58 700825 1MUFFLER 59 700826 1SPRING, Extension 60 700364 1

EXPANDER, Complete 61 700365 1TANK, Fuel 62 700831 1PIPE, Fuel (Not a serviceable part. Order Kit Ref. No 21) 63 ----- 1

PIPE, Soft PVC (Not a serviceable part. Order Kit Ref. No 21) 64 ----- 1

PLUG, Fuel Line (Not a serviceable part. Order Kit Ref. No 21) 65 ----- 1FILTER, Fuel 66 701666 1

CHAIN (Not a serviceable part. Order Kit Ref. No 22) 67 ----- 1

COVER, End (Not a serviceable part. Order Kit Ref. No 22) 68 ----- 1LID, Fuel Tank, Inner (Not a serviceable part. Order Kit Ref. No 22) 69 ----- 1

INLET (Not a serviceable part. Order Kit Ref. No 22) 70 ----- 1

GASKET (Not a serviceable part. Order Kit Ref. No 22) 71 ----- 1LID, Fuel Tank (Not a serviceable part. Order Kit Ref. No 22) 72 ----- 1

BOLT, M5 x 50 73 700371 2

WASHER, Spring, 5 74 700372 24WASHER, Flat, 5 75 700373 23

BOLT, M5 x 20 76 700374 10

BOLT, M5 x 12 77 700376 3WASHER, Flat, 5 78 700763 1

SCREW, Self Tapping, 5 x 20 79 700764 3

SCREW, Self Tapping, 4.2 x 30 80 700765 1BOLT, M5 x 18 81 700391 4PIN, Cylindrical, B4 x 10 82 700386 4

BOLT, M5 x 30 83 700377 4NUT, M8 84 700378 2WASHER, Spring, 8 85 700379 1

WASHER, Flat, 8 86 700380 1BOLT, M5 x 55 87 700766 2



866014 - SP33W

1751790


866014e



866014 - SP33W

1751790



Footnotes

SCREW, Shaft (S=17) 88 700767 2WASHER, Wave 89 700382 2WASHER, B 90 700383 2

BOLT, M5 x 16 91 700375 3PLUG, Rubber 92 700388 2PAD, Bracket 93 700389 2

COVER, Rubber 94 700390 1KIT, Starter Assembly (Includes Ref. Nos. 5 & 6) 95 701664 1

KIT, Tank Bracket Assembly (Includes Ref. Nos. 23, 74, 75, 83, 93 & 94) 96 701665 1



866014 - SP33W

1751790


866018e



866018 - SP43W

1751790



Footnotes

KIT, Air Cleaner Assembly, Complete (Includes Ref. Nos. 2, 24, 25 & 26) 1 700903 1KIT, Air Cleaner Assembly, Inner (Includes Ref. Nos. 27, 28, 29 & 30) 2 700806 1CARBURETOR 3 700905 1

KIT, Admitting Pipe (Includes Ref. Nos. 31, 32 & 33) 4 700846 1STARTER, Rewind 5 700809 1PAD, Starter 6 700329 1

KIT, Start Reel Assembly (Includes Ref. Nos. 34, 35, 36 & 37) 7 700330 1KIT, Shroud Assembly (Includes Ref. Nos. 38 & 39) 8 700906 1

KIT, Cylinder Assembly (Includes Ref. Nos. 10, 40 & 41) 9 700909 1KIT, Piston Assembly (Includes Ref. Nos. 42, 43, 44 & 45) 10 700911 1KIT, Crank Shaft Assembly (Includes Ref. Nos. 46, 47 & 48) 11 700859 1

KIT, Cylinder Case Assembly (Includes Ref. Nos. 49, 50, 51, 52 & 53) 12 700913 1KIT, Magneto Assembly (Includes Ref. Nos. 54, 55, 56 & 57) 13 700916 1KIT, Muffler Assembly (Includes Ref. Nos. 58 & 59) 14 700917 1

Cord Comp. 15 700827 1SPARK PLUG 16 700360 1COVER, Fan 17 700919 1

KIT, Expander Assembly (Inlcudes Ref. Nos. 60 & 61) 19 700829 1KIT, Fuel Tank Assembly (Includes Ref. Nos. 21, 22 & 62) 20 700920 1KIT, Fuel Line Assembly (Includes Ref. Nos. 63, 64, 65 & 66) 21 700922 1

KIT, Fuel Cap Assembly (Includes Ref. Nos. 67, 68, 69, 70, 71 & 72) 22 701467 1

BRACKET, Tank 23 700370 1SCREW 24 700804 1

COVER, Cleaner, Outer 25 700805 1

FILTER 26 700317 1SCREW, Self Tapping, ST4.2 x 12 27 700319 1

CHOKE VALVE 28 700320 1

HANDLE, Choke Valve 29 700807 1COVER, Cleaner, Inner 30 700322 1

GASKET, Admitting Pipe 31 700847 1

ADMITTING PIPE 32 800848 1GASKET, Carburetor 33 700849 1

STARTER CINCH (Not a serviceable part. Order Kit Ref. No 7) 34 ----- 2

SPRING, Starter (Not a serviceable part. Order Kit Ref. No 7) 35 ----- 2RING, Retainer, 4 (Not a serviceable part. Order Kit Ref. No 7) 36 ----- 2

STARTER BOX (Not a serviceable part. Order Kit Ref. No 7) 37 ----- 1

SHROUD, Front 38 700907 1SHROUD, Rear 39 700908 1CYLINDER 40 700910 1

GASKET, Cylinder 41 700853 1RING, Pin Retain 42 700912 2PIN, Piston 43 700856 1

RING, Piston 44 700857 2

* Not a serviceable Part, order complete assembly.



866018 - SP43W

1751790


866018e



866018 - SP43W

1751790



Footnotes

PISTON 45 700858 1KEY, 3 x 5 x 13 46 700341 1BEARING, Needle 47 700860 1

CRANKSHAFT 48 700861 1SEAL, Oil, 11.7 x 22 x 7 49 700345 2BEARING, 6201/P6 50 700865 2

GASKET, Crank Case 51 700866 1CRANK CASE, Rear 52 700914 1

CRANK CASE, Front 53 700915 1CLIP, Spark Plug 54 700351 1BOOT, Spark Plug 55 700352 1

MAGNETO COIL 56 700871 1FLY WHEEL 57 700872 1GASKET, Muffler 58 700874 1

MUFFLER 59 700918 1SPRING, Extension 60 700364 1Expander Comp. 61 700365 1

TANK, Fuel 62 700921 1PIPE, Fuel (Not a serviceable part. Order Kit Ref. No 21) 63 ----- 1PIPE, Soft PVC 64 700923 1

PLUG, Fuel Line (Not a serviceable part. Order Kit Ref. No 21) 65 ----- 1

FILTER, Fuel 66 701666 1CHAIN (Not a serviceable part. Order Kit Ref. No 22) 67 ----- 1

COVER, End (Not a serviceable part. Order Kit Ref. No 22) 68 ----- 1

LID, Fuel Tank, Inner (Not a serviceable part. Order Kit Ref. No 22) 69 ----- 1INLET (Not a serviceable part. Order Kit Ref. No 22) 70 ----- 1

GASKET (Not a serviceable part. Order Kit Ref. No 22) 71 ----- 1

LID, Fuel Tank (Not a serviceable part. Order Kit Ref. No 22) 72 ----- 1BOLT, M5 x 50 73 700371 2

WASHER, Spring, 5 74 700882 24


BOLT, M5 x 12 77 700376 3

WASHER, Flat, 5 78 700763 3SCREW, Self Tapping, 5 x 20 79 700764 3

BOLT, M5 x 30 80 700377 1

PIN, Cylindrical, B5 x 12 82 700885 4SCREW, Self Tapping, ST4.2 x 25 83 700924 4NUT, M8 84 700378 1

*WASHER, Spring, 85 700379 1WASHER, Flat, 8 86 700380 1BOLT, M6 x 55 87 700925 1

SCREW, Shaft 88 700767 2WASHER, Wave 89 700382 2




866018 - SP43W

1751790


866018e



866018 - SP43W

1751790



Footnotes

WASHER, B 90 700383 2BOLT, M5 x 16 91 700375 2PLUG, Rubber 92 700388 2

COVER, Rubber 94 700390 1BOLT, M5 x 25 95 700881 2WASHER, Spring, 6 96 700433 2

WASHER, Flat, 6 97 700434 2PIN, Cylindrical, B4×10 98 700386 2

SEAL, Oil, 30 x 1437 x 7 99 700864 1KIT, Starter Assembly (Includes Ref. Nos. 5 & 6) 100 701664 1KIT, Tank Bracket Assembly (Includes Ref. Nos. 23, 74, 75, 91 & 94) 110 701667 1




866018 - SP43W

1751790

Main UnitNOTE: Unless noted otherwise, use the standard hardware torque specification chart.

866014



866014 - SP33W866018 - SP43W

1751790


Main Unit

Footnotes

KIT, Gear Box Assembly (Includes Ref. Nos. 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 37, 38, 39, 40, 41, 42 & 97)

1 700768 1

KIT, Drive Shaft Assembly (Includes Ref. Nos. 43, 44, 45 & 46) 2 700775 1KIT, Handle Assembly (Includes Ref. 47 & 48) 3 700777 1

KIT, Throttle Control Switch Assembly (Includes Ref. Nos. 49, 50, 51, 52, 53, 54, 55, 56, 57 & 58)

4 700778 1

KIT, Clutch Assembly (Includes Ref. Nos. 59, 60, 61, 62, 63 & 64) 5 700789 1

KIT, Hang Ring Assembly (Includes Ref. Nos. 65 & 66) 6 700419 1KIT, Limit Ring Assembly (Includes Ref. Nos. 67, 68, 69, 70 & 71) 7 700836 1KIT, Guard Assembly (Includes Ref. Nos. 72, 73, 74, 75 & 96) 8 700790 1

KIT, Bump Head Assembly (Includes Ref. Nos. 80, 81, 82, 83, 84, 85, 86, 87 & 88) 9 700437 1SHOULDER HARNESS 10 700797 1BLADE 11 700838 1

BRACKET, Shaft, Lower 12 700798 1BRACKET, Shaft, Upper 13 700799 1SPRING 14 700839 1

BRACKET, Handle, Lower 15 700800 1BRACKET, Handle, Upper 16 700801 1

BOLT 17 700802 1RING, Stop, 28 (Not a serviceable part. Order Kit Ref. No 1) 18 ----- 1RING, Stop, 12 (Not a serviceable part. Order Kit Ref. No 1) 19 ----- 1

BEARING, 6001-2RS/P6 (Not a serviceable part. Order Kit Ref. No 1) 20 ----- 1BEARING, 6001/P6 (Not a serviceable part. Order Kit Ref. No 1) 21 ----- 1PINION (Not a serviceable part. Order Kit Ref. No 1) 22 ----- 1

GEAR BOX (Not a serviceable part. Order Kit Ref. No 1) 23 ----- 1COVER, Blade 24 700769 1BEARING, 6000/P6 (Not a serviceable part. Order Kit Ref. No 1) 25 ----- 1

GEAR (Not a serviceable part. Order Kit Ref. No 1) 26 ----- 1SHAFT, Spline (Not a serviceable part. Order Kit Ref. No 1) 27 ----- 1BEARING, 6002-2RS/P6 (Not a serviceable part. Order Kit Ref. No 1) 28 ----- 1

RING, Stop, 35 (Not a serviceable part. Order Kit Ref. No 1) 29 ----- 1

SEAL, Oil 30 700770 1SLEEVE, Spline 31 700771 1

GASKET, Spline 32 700772 1

HOLDER 33 700841 1PROTECTOR, Blade 34 700842 1

WASHER, 10 35 700773 1

NUT 36 700397 1BOLT, M5 x 12 37 700399 3

WASHER, Spring, 5 38 700400 4


BOLT, M6 x 20 41 700402 1

WASHER, Spring, 6 42 700403 1BEARING, Oil 43 700407 2



866014 - SP33W866018 - SP43W

1751790


866014



866014 - SP33W866018 - SP43W

1751790


Main Unit

Footnotes

BEARING, Oil, Rubber Cover 44 700406 2DRIVE SHAFT 45 700408 1SHAFT, Straight 46 700776 1

HANDLE 47 700833 1COVER, Handle 48 700834 1COVER, Handle, Control Switch, RH 49 700779 1

STOP BUTTON, Complete 50 700780 1Cable Comp. 51 700781 1

SCREW, M5 x 30 52 700782 1WASHER, Flat 5 53 700783 1SCREW, Self Tapping, 3.5 x 13 54 700784 1

COVER, Handle, Control Switch, LH 55 700785 1LEVER, Throttle 56 700786 1SPRING, Torsion 57 700787 1

HANDLE, Self Lock 58 700788 1RING, Stop, 37 (Not a serviceable part. Order Kit Ref. No. 5) 59 ----- 1CASE, Clutch (Not a serviceable part. Order Kit Ref. No. 5) 60 ----- 1

RING, Stop, 15 (Not a serviceable part. Order Kit Ref. No. 5) 61 ----- 1BEARING, 6202-2Rz/P6 (Not a serviceable part. Order Kit Ref. No. 5) 62 ----- 1RING, Stop, 35 (Not a serviceable part. Order Kit Ref. No. 5) 63 ----- 1

CLUTCH DRUM, Complete 64 701471 1

RING, Hang 65 700420 1BRACKET, Hang Ring 66 700421 1

NUT, M6 (Not a serviceable part. Order Kit Ref. No. 7) 67 ----- 1

WASHER, 6 (Not a serviceable part. Order Kit Ref. No. 7) 68 ----- 1SPRING (Not a serviceable part. Order Kit Ref. No. 7) 69 ----- 1

BOLT, M6 (Not a serviceable part. Order Kit Ref. No. 7) 70 ----- 1

Ring for Limit (Not a serviceable part. Order Kit Ref. No. 7) 71 ----- 1BOLT, M5 x 12 72 700791 1

BOLT, M5 73 700792 2

HOLDER, Safety Guard 74 700793 1SAFETY GUARD 75 700794 1

SCREW, Self Tapping, ST4.2 x 16 76 700795 1

SECURING SADDLE 77 700796 1BLADE 78 700427 1

COVER, Blade 79 700428 1

COVER, Bump Head (Not a serviceable part. Order Kit Ref. No. 9) 80 ----- 1BUMP HEAD (Not a serviceable part. Order Kit Ref. No. 9) 81 ----- 1COVER, Rope (Not a serviceable part. Order Kit Ref. No. 9) 82 ----- 1

SEAT, Rope (Not a serviceable part. Order Kit Ref. No. 9) 83 ----- 1ROPE (Not a serviceable part. Order Kit Ref. No. 9) 84 ----- 1SPRING, Bump Head (Not a serviceable part. Order Kit Ref. No. 9) 85 ----- 1

COVER, Rope (Not a serviceable part. Order Kit Ref. No. 9) 86 ----- 1BOX, Bump Head (Not a serviceable part. Order Kit Ref. No. 9) 87 ----- 1



866014 - SP33W866018 - SP43W

1751790


866014



866014 - SP33W866018 - SP43W

1751790


Main Unit

Footnotes

NUT (Not a serviceable part. Order Kit Ref. No. 9) 88 ----- 1BOLT, M5 x 16 89 700803 2WASHER, Spring, 5 90 700400 2

BOLT, M6 x 16 91 700444 3WASHER, Spring, 6 92 700403 7WASHER, Flat, 6 93 700443 7

BOLT, M6 x 20 94 700402 4KIT, Handle Bracket Assembly (Includes Ref. Nos. 13, 14, 15, 16 & 17) 95 701668 1

KIT, Securing Saddle Assembly (Includes Ref. Nos. 76, 77, 78 & 79) 96 701669 1KIT, Blade Assembly (Includes Ref. Nos. 11, 33, 34, 35 & 36) 97 701670 1



866014 - SP33W866018 - SP43W

1751790

in/lbsft/lbs

3

Torque Specification ChartFOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)

PropertyClass

Class 8.8 Class 10.9 Class 12.9

Size OfHardware Nm. Nm. Nm. Nm.

M3 1.282.905.75

9.916.5

244883

132200275390530375995

1350183023603050

13.44 1.804.108.10

14233467

117185285390550745960

14001900258033104290

19.2 22.92 2.15M4 30.72 43.44 52.56 4.95M5 60.96 5.97 7.15

16.59.7

M6 7.3 10.3 12.1M7 12.1 16.9 19.9 27M8 17.7 25 29 40M10 35 50 59 81M12 61 86.2 103 140M14 101 136 162 220M16 147 210 250 340M18 202 287 346 470M20 290 405 486 660M22 390 559 656 890M24 497 708 840 1140M27 733 1032 1239 1680M30 995 1401 1681 2280M33 1349 1902 2278 3090M36 1740 2441

37982935 3980

M39 2249 3163

Torque Specification ChartFOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

HardwareGrade

SAE Grade 2 SAE Grade 5 SAE Grade 8

Size Ofin/lbsft/lbs

in/lbsft/lbs

in/lbsft/lbs

in/lbs in/lbsHardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 19 2.1 30 3.4 41 4.68-36 20 2.3 31 3.5 43 4.910-24 27 3.1 43 4.9 60 6.810-32 31 3.5 49 5.5 68 7.71/4-20 66 7.6 8 10.9 12 16.31/4-28 76 8.6 10 13.6 14 19.05/16-18 11 15.0 17 23.1 25 34.05/16-24 12 16.3 19 25.8 29 34.03/8-16 20 27.2 30 40.8 45 61.23/8-24 23 31.3 35 47.6 50 68.07/16-14 30 40.8 50 68.0 70 95.27/16-20 35 47.6 55 74.8 80 108.81/2-13 50 68.0 75 102.0 110 149.61/2-20 55 74.8 90 122.4 120 163.29/16-12 65 88.4 110 149.6 150 204.09/16-18 75 102.0 120 163.2 170 231.25/8-11 90 122.4 150 204.0 220 299.25/8-18 100 136 180 244.8 240 326.43/4-10 160 217.6 260 353.6 386 525.03/4-16 180 244.8 300 408.0 420 571.27/8-9 140 190.4 400 544.0 600 816.07/8-14 155 210.8 440 598.4 660 897.61-8 220 299.2 580 788.8 900 1,244.01-12 240 326.4 640 870.4 1,000 1,360.0

Hex Head Capscrew

Hex Nut

Lockwasher

Washer

Carriage Bolt

NOTES1. These torque values are to be used for all hardware

excluding: locknuts, self-tapping screws, thread formingscrews, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:a. for prevailing torque locknuts - use 65% of grade 5

torques.b. for flange whizlock nuts and screws - use 135% of

grade 5 torques.3. Unless otherwise noted on assembly drawings, all torque

values must meet this specification.

Hardware Identification & Torque Specifications

Common Hardware Types

NoMarks

The guides and ruler furnished below are designed tohelp you select the appropriate hardware.

8.8 10.9 12.9

Class 5.6

5.6

5150

13.44 1.285.88

26.4 2.5044.64 4.3

5.2 7.17.7 10.515 21

988 1340759 1030590 800435 590320 435217 295169 230126 17189 12164 8842 5826 36

.56

ThreadDiameter (mm)

Screw, 1/2- 16 x 2

BodyDiameter

Diameter

InsideDiameter (in)

Nut, 1/2-16

01/4 3/41/2 21

1/4 3/41/2 1/4 3/41/2 1/4 3/41/2 4

90 10070 8050 6030 400 10 20

ThreadDiameter (mm)

Nut, M8 Screw, M8- 1.25 x 25

Distance between threads (mm)

BodyLength (in)

BodyLength (mm)

3/8” Bolt or NutWrench—9/16”




7/16” Bolt or NutWrench (Bolt)—5/8”Wrench (Nut)—11/16”

in/lbs

Threads per inch

Threads per inch

Body Length

Body

When a washer or nut is identified as 1/2” (M8), this is the Nominal size, meaning the inside diameter is 1/2 inch (8mm metric thread diameter); if a second number is presentit represents the threads per inch (distance between threads).

When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ),this means the Nominal size, or body diameter is 1/2 inch (8mmmetric thread diameter), the second number,16, represents the threads per inch, (1.25 thread diameter). The final number is the body length of the bolt or screw, 2 inches (50mm).

Standard Hardware Sizing

M6 Bolt or NutWrench—10mm




M14 Bolt or NutWrench—22 mm

Wrench & Fastener Size Guide

3515 N. 124 Street / PO Box 702Wauwatosa, WI 53222 USA

www.BRIGGSandSTRATTON.com

2011Milwaukee, WI, USA. All rights reserved

Briggs & Stratton Yard Power Products Group

© Copyright by Briggs & Stratton Corporation

IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY

OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.

Documents

file_0426be0cd068c2113bfaf8dd5a08f3bf4789b0bd