FIBRE CEMENT - Whole of Housewholeofhouse.bunnings.com.au/.../ExternalCladdingFibreCement... · Villaboard HardieGroove PineRidge < ... • The thickness of the Scyon Axent trim helps

FIBRE CEMENT WALLS, FLOORS & CEILINGS

CLICK TO START

OtherInternal LiningsHome Eaves & SoffitsFlooring & DeckingBuilding FacadesCladding Weatherboards

Cladding Flooring, Decking & UnderlaysBuilding FacadesWeatherboards

Fibre cement walls, floors & ceilings.

Trims & AccessoriesInternal LiningsEaves & Soffits

< BACK


EasyLap

Cladding

Scyon Stria Range Scyon Axon RangeScyon Matrix

HardieTexHardieFlex

< BACK


Scyon Stria Range

Weatherboards

Scyon Linea

Primeline Range HardiePlank Range

< BACK


Building Facades

ExoTec ComTex

< BACK


Flooring, Decking & Underlays

Secura Interior

Ceramic Tile Underlay

Secura Exterior

Vinyl & Cork Underlay

HardiePanel Compressed

HardieDeck

< BACK

OtherInternal LiningsEaves & SoffitsFlooring & DeckingBuilding FacadesCladding WeatherboardsHome

Eaves & Soffits

HardieFlex Eaves Versilux

< BACK


Internal Linings

Villaboard HardieGroove PineRidge

< BACK


Trims & Accessories

Axent Trim

Bracing

HardieWrap

HardieScreen Lattice

Thermal Break Artista Columns

Hardie Fence

< BACK

The Offer

• External cladding• Facade systems• Eaves and soffits• Internal lining• Thermal break• Weather barrier• Trim• Structural flooring• Flooring underlay• Bracing sheet• Fencing• Columns• Lattice

A global leader in wall and floor building products

Scyon™ Lin

ea™

weatherboardScyon™ Axent™ trim

Scyon™ Lin

ea™

weatherboardScyon™ Secura™

interior flooring tiled

Scyon™ Lin

ea™

weatherboardScyon™

Axon™

cladding

Scyon™ Linea™

weatherboardEasylap™ panels

with roll on texture paint

Scyon™ Stria™

claddingScyon™ Linea™

weatherboard

Scyon™ Lin

ea™

weatherboardVersilux® lining

click on any of the above images to find out more about that product

For further information about performance, installation, warranties and warnings click here


• Vertically grooved panel that looks sharp and smooth.• Two groove width patterns 133/400mm• Smooth or grained texture• 3 sizes of sheets, sized to fit common wall frame sizes = less

waste and cutting• Large sheet sizes and the shiplap joint enable fast installation• Pre-primed for fast paint application

A pristine look that lastsAXON™

CLADDING

133mm Grained 133mm Smooth 400mm Smooth

< BACK

https://l.bunnings.com.au/trade/trade-home_whole-of-house_james-hardie_technical-sheets.aspx



• Weatherboard that doesn’t weather• 16mm thick with deep shadow lines• Two widths: 150/180mm• Easy to install, back bevelled boards to sit flush with the

stud• Pre-primed for a fast paint application• A range of corner accessories• Concealed fixing and off stud jointing option

The weatherboardthat weathers wellLINEA™

WEATHERBOARD

< BACK




• A flat, smooth panel installed to create a geometric, expressed joint look

• 4 panel sizes – sealed on all six sides for durability and stability• Simple to install with Scyon™ cavity trim battens – no steel top

hats required• Pre-primed sheets for fast paint application• Flush finish with brad nail fixing (Up to N3 wind classification)

The commercial lookwithout the price tagMATRIX™

CLADDING

< BACK




• Fast way to achieve a timeless and classic look• Three profiles ranging from 14 to 16mm thick to 255, 325

and 405mm width, each feature a horizontal ship-lapped joint

• Pre-primed for a fast paint application• Joined on or off stud• Easy-to-cut mitred corners mean that horizontal lines

wrap corners seamlessly

Classic appeal with modern methods

325mm Standard 255mm Splayed 405mm Wide

STRIA™ CLADDING

< BACK




• Four sizes, either 19mm or 38mm thick with a 45mm or 89mm width, sanded or smooth finish

• A thick versatile, advanced cement composite trim• Ideal finish to highlight and accentuate• Resists shrinking, swelling and cracking• The thickness of the Scyon Axent trim helps create the

impression of solidness with a crisp clean edges

The finishing touchthat keeps its finish

Scyo

n™ Li

nea™

weat

herb

oard

Axent™ trim

AXENT

™ TRIM

< BACK




• A strong base sheet with a shiplap vertical joint - eliminates the need for a vertical set and control joint

• Finished on site with a roller-applied textured paint finish - eliminates the need for specialised applicators

• Large sheets sizes with off-the-shelf corner finishing details give fast and cost effective broad wall coverage

A rendered look witha subtle vertical joint

Scyo

n™ Li

nea™

weat

herb

oard

shiplap jointSc

yon™

Line

a™

weat

herb

oard

< BACK




• A smooth flat sheet that creates a panelled look• Versatile looks with options like express joint for the

eaves and soffits and battens for external and internal walls

• An external cladding but can be used in feature walls or eaves and soffits with eave width sizes available

Versatile looksand usages

Axent™ TrimExpress Joint Eave & Soffit only

Scyo

n™ Li

nea™

weat

herb

oard

HardieFlex™ sheet

< BACK




• A no-fuss, site painted weatherboard available in a range of different 4 styles - Smooth, Old Style, Rusticated, Woodgrain

• Ideal for full wrap and composite designs for use as External cladding, eaves and soffits or as a feature wall

• Resistant to Moisture, Termites, and even Fire• Ideal for Bushfire and Fire rated construction

A diverse and attractive weatherboard range

Woodgrain Smooth Rusticated Old Style

Scyon™ Linea™

weatherboard

HardiePlank™ Old Style

Scyon™ Linea™

weatherboard

HardiePlank™ Smooth

< BACK




• Pre-primed, lightweight designed for a monolithic rendered look without the need to use masonry

• A seamless monolithic look created by the recessed edges filled with a reinforced tape and compound finished with an acrylic textured coat

• Tested and manufactured by James Hardie for more than 20 years

A monolithic render, minus the masonry

Scyon™ Linea™

weatherboard

Acrylic texture coat overHardieTex™ base sheet

< BACK




• A pre-textured, site painted sheet in two classic modern styles, Stucco and TextureLine

• Recommended for use as External Cladding, Eaves, Soffits, gable ends and even feature walls

• Easy to install with pre-made James Hardie accessories makes it a breeze to install

• Suitable for use as Bracing, Fire and Bushfire rated walls

A pre-textured sheet in two unique styles

Stucco TextureLine

< BACK




• 4 profiles – Summit, Newport, Heritage, Chamfer• Pre-primed for fast paint application• HardieLock™ fixing system (Summit and Newport)

enables off-stud joining concealed fixing• Double board width (Chamfer and Heritage) enables fast

wall coverage

Easy to install,paint and maintain

Chamfer Summit Newport Heritage

< BACK




• Fully sealed, compressed fibre cement board designed for commercial scale buildings

• Durable, low-maintenance and impact resistant system• An external facade, fascia or soffit• Make a variety of panel patterns - staggered, horizontal or

vertical• Ideal for site applied to factory applied to metallic finishes

Perfect forcommercial facades,

fascias and soffits

Scyo

n™ Li

nea™

weat

herb

oard

Express Joint

< BACK




• Pre-primed, site finished with a high build acrylic texture coat to achieve a monolithic, render look without using masonry

• An external facade, fascia or feature wall• Ideal for Commercial high rise buildings• Can be installed directly onto a timber or light gauge steel frames, to structural beams• James Hardie recommendations on Fire Rated walls• Quick to install which means that you can save money not needing to hire scaffolding as long

Ideal for high rise buildings without the

need for masonry

Scyo

n™ Li

nea™

weat

herb

oard

Acrylic Texture coat

< BACK




• A smooth flat sheet that creates a panelled look• Versatile looks with options like express joint for the

eaves and soffits and battens for external and internal walls

• An external cladding but can be used in feature walls or eaves and soffits with eave width sizes available

Versatile looksand usages

Axent™ Trim

Express Joint Eave & Soffit only

Scyo

n™ Li

nea™

weat

herb

oard

HardieFlex™ eaves sheet

< BACK




• A flat sheet that has vertical V-shaped grooves carved into its face

• Sheet edges are finished with a half groove to conceal butt jointing and make it fast and easy to install

• Can be used in bathrooms as well as on eaves and soffits

Vertical grooves,great looking and

hard wearing

Scyo

n™ Li

nea™

weat

herb

oard

HardieGroove™ lining

< BACK




• A timber-textured, site-painted internal sheet lining• Ideal as an internal wall lining in residential living areas, hallways,

garages and workshops, where a durable, timber-panel look is sort

• The high impact resistance makes it the smart choice for high-traffic areas that are prone to wear and tear

• It’s lightweight, large sheet sizes and square edges, together with PineRidge® PVC Jointers, make it easy and fast to install by tradespeople, owner-builders and renovators

Timber textured with high impact properties, ideal

for high-traffic areas

< BACK




• Designed as an internal lining for walls and ceilings but can also be used in external eaves and soffits

• Sanded and pre-sealed ready for a direct application of paint

• Panellised look with express joint (eaves and soffits only) cover joint or batten joint options

• The high impact resistance compared to plasterboard lining, makes it the smart choice for high-traffic areas that are prone to wear and tear

• Recommended for fire-rated and acoustically rated systems• Internal bracing can be achieved using the 6 & 9mm sheets

Powerful performance relating to

impact resistance

Axent™ Trim

Express Joint Eave & Soffit only

Scyo

n™ Li

nea™

weat

herb

oard

Versilux® lining

< BACK




• The industry standard for internal wall and ceiling lining• A flat sheet with long edges recessed for flush jointing using

James Hardie™ Base and Top Coat• Can be painted, wall papered or tiled• Wet, dry and high traffic areas• Fire and Acoustically rated walls suitable• Greater tile adhesion than plasterboard• Suitable for commercial and residential applications.• Can also be used as internal bracing• Superior resistance to moisture damage in the event that it gets

wet compared to plasterboard and other non-fibre cement linings

Even if it gets wet it still holds its strength making it suitable for wet area’s Sc

yon™

Line

a™

weat

herb

oard

Scyo

n™ Li

nea™

weat

herb

oard

Tile adhesive

Scyo

n™ Li

nea™

weat

herb

oard

Tiles

Scyo

n™ Li

nea™

weat

herb

oard

Perforated papertape &

James Hardie™ Base Coat

< BACK




• 2750mm x 43mm, designed to fit the height of common wall frames to help reduce on-site cutting and wastage

• Ideal for Steel frame construction to minimise heat leakage• No special tool required, can be cut with a Stanley knife• Improves the R-value by up to 12% compared to other

thermal breaks and up to 30% compared with no thermal break at all

• Does not compress like many other products, this help reduce facade waviness over time

• Made from a robust material, this minimises breakage during handling and installation

• Rear surface is sticky; this makes it easier for one person to install

• Non-absorbent mould resistant which reduces problems like rust

• Reduces ghosting effects seen in some cladding installed onto steel framed walls, particularly in cool climate areas

Excellent compression resistance, great

strength and thermal performance

< BACK




• Extra wide 2.75 metres x 30 metres long• Improves thermal performance and save insulation costs by up

to R0.3m2K/W without the need to upgrade the bulk insulation• Up to 50% faster installation - in certain applications compared

to 1.35metre products• Reduces condensation build-up due to highly breathable pores

that help interior water vapour to escape the building to the outside

• 10% less wastage compared to 1.35metre wide products• Lighter and easier to cut - compared to many other foil wall

barriers• Fire and Bushfire compliant - its low flammability makes it

suitable for all bushfire areas in accordance with AS 3959-2009

Highly breathable,Non-perforated,

Reflective^ safe glare

< BACK




• Structural flooring substrate• Suitable for tile finishes over timber or steel joists• Up to 40% faster to install than conventional compressed sheets• Can be gun nailed and is easy to cut like timber• Tongue and grooved• Full floor waterproofing not required over a non-habitable areas

Peace of mindthe easy waySECURA™

EXTERIOR

< BACK




• Structural flooring substrate• Suitable for tile, vinyl and carpet finishes over timber or steel

joists.• Up to 40% faster to install than conventional compressed sheets• Can be gun nailed and is easy to cut like timber• Tongue and grooved• Full floor waterproofing not required outside some shower areas.• Residential and Commercial applications

Top protection onall interior floorsSECURA™

INTERIOR

< BACK




• A thick, durable compressed structural flooring substrate suitable for all types of construction

• Ideal for ceramic tiled finishes over timber or light weight steel floor joists

• Suitable for use as a tiled floor sub straight in general areas, wet areas, verandas and more...

• Moisture, termites, rot and fire resistant• A lightweight alternative to masonry

A thick, durable compressed structural

flooring substrate

< BACK




• An internal underlay for ceramic tile finishes• Ideal for applications over timber, particleboard and

plywood substrates• Reduces the movement of tile movement• Suitable for both wet and dry areas• Pre-marked nailing pattern• Gun-nailable• Pre-sealed ready for installation, the sealer increases

cement based tile adhesives working time by 50%• Can be cut using fibre shears, hand guillotine or score

and snap knife• Resistant to damage from termites, rot and fire

Ideal for wet anddry areas as a

substrate for tiles

< BACK




• An internal underlay designed for vinyl and cork finishes• Ideal for applications over timber, particleboard and

plywood substrates• Provides a smooth, flat surface as a base• Clear nail markings for easy installation• Can be stapled or gun-nailed• Pre-sealed ready for installation• Can be cut using fibre shears, hand guillotine or score

and snap knife• Resistant to damage from termites, rot and fire

Smooth, flat surfacefor vinyl and

cork applications

< BACK




• Ideal around pools, in bush fire zones and for low to the ground decks.

• Stable fibre cement boards require less staining and maintenance.

• Save on labour costs. Install in up to half the time of a timber deck.

• Can be stained or painted in a wide range of stylish colours.

• Resists damage from cracking, splintering, rot, moisture & termites*.

A durable deck that won’t rot or splinter and resists termites

* When installed and maintained correctly as set out in the Design Guide.

< BACK




• A durable bracing sheet used under wall cladding to provide structural bracing against lateral forces (such as wind) or racking shear (from movement such as earthquakes)

• Ideal for residential and medium density housing• Pre-marked nailing pattern to speed up the installation• If the rain holds you up during construction, the product

won’t need replacing or sanding because its warped or twisted

Earthquakes & cyclonic high wind

regions no problems

Scyo

n™ Li

nea™

weat

herb

oard

HardieBrace® sheet

< BACK




• A hollow column, with a smooth surface, that’s available in a classic or tapered profile, and that can be coupled with various capitals and bases, and be site-painted or rendered to create a wide range of looks from classical to contemporary

• An external, internal decorative or structural feature around entrances, patios, pools and entertainment areas

• They can be used in both load-bearing and non-load-bearing applications

An external, internal decorative or

structural feature

< BACK




• A decorative screen with either a square or diamond lattice pattern

• Designed for use on external structures such as, gazebos, verandas, fences, gable ends and even internal spaces

• Creates privacy, ventilation, shade and design interest• Extremely durable, resistant to rot and no fasteners are

required• Made from fibre cement which is resistant to damage

from termites, rot and fire

Creates privacy, ventilation, shade and

design interest

Square Diamond

< BACK




• A site-painted, post less system, incorporating 7mm thick interlocking sheets with a metal top cap, suited to sandy soils

• Designed for flat or sloping sites in Western Australia.• The sheets overlap on one side and underlap on the other

side• There are no protruding bolts, sharp edges or nails.• Concrete footings are not needed.• Designed to be buried in the soil

Speedy installation with no concrete

footings WA ONLY

< BACK


For Product EnquiriesContact our CustomerLink Team

on: 13 11 03

For Engineering Solutions Contact our Technical Team

on: 13 11 03

For take-off tools Contact our ACCEL™ Team

on: 13 11 03

James Hardie Product Support

Can we help?

Bunnings welcomes the opportunity to quote your next job

Please contact your local Bunnings account manager or call 133 062

Documents

FIBRE CEMENT - Whole of Housewholeofhouse.bunnings.com.au/.../ExternalCladdingFibreCement... · Villaboard HardieGroove PineRidge < ... • The thickness of the Scyon Axent trim helps