Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
Fiber Monitor Panel, FMP seriesFiber Interface Panel for Macro and DAS diagnostics
Rev. B
t Up to 12 channel pairs in 1 RU
t Permanent monitor/sample port
Never have to break a link
t Easy access to monitor port on opposite
side of signal inputs
t Reliable all passive technology ensures
maximum up-time
t Rack ears accommodate both 19” & 23” racks
t User defined number of channels, coupler
values, connector types, and fiber mode
Table 1 - Optical SpecificationsFeatures
The FMP series Fiber Monitor Panel offers a monitor port for both analog (RFoF) and digital (CPRI) fiber links. It enables connection to a test and monitoring tool without the need to disrupt an installation. With the advent of Common Public Radio Interface (CPRI) and Open Base Station Architecture Initiative (OBSAI) various devices are be-ing introduced to determine the health of a digital fiber interface. A problem can arise if the troubleshooting needs to be done outside of the maintenance window, or if the symptom disappears on signal reset. To resolve those problems the FMP was developed. The unit installs in the equipment rack either when the system is being built out, or during a maintenance window. The impact on the fiber infrastructure is minimal as only a portion of the optical energy is diverted. An RFoF, CPRI, or OBSAI analyzer can then be connected to one of the sampled ports.
Description
Parameter Unit Specification
Operating Wavelength nm 1310 and 1550
Operating Bandwidth nm ± 40
Coupling Ratio(through/coupled)
% 50/50 90/10 80/20
Max. Insertion Loss(through/coupled)
dB 3.7/3.7 0.7/11.8 1.5/8.0
Max. PDL 0.1 0.2/0.1 0.15/0.1
Directivity dB >55
Return Loss dB >50
Operating Temperature °C 0 to +70
Storage Temperature °C -40 to +85
Reliability, Compliance Telcordia GR-1221-Core
Part Numbering Guide
Table 2 - Mechanical Specifications
Parameter Unit Specification
Dimensions without ears(W x D x H)
mm 422 x 200 x 43.80
in 16.614 x 7.874 x 1.724
Max. Weight lb 3
Note: Specifications are subject to change without prior notification.
Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054
Tel: (973) 386-9696 • [email protected] • www.microlab.fxr.com • Fax: (973) 386-9191
14MAR2016
FMP XX YYYY Z N
FiberMonitor
Panel
# of Channel Pairs06 = 6 channel pairs12 = 12 channel pairs
Coupling Value5050 = 50%/50%8020 = 80%/20%9010 = 90%/10%
Fiber ModeS = Single ModeM = Multi-mode
Fiber Endface PolishA = APC, 8 deg angled physical contact (green)U = UPC, ultra physical contact dome (blue)
-
Figure 2 - FMP Outline
Fiber Monitor Panel, FMP seriesFiber Interface Panel for Macro and DAS diagnostics
Page 2
Microlab, A Wireless Telecom Group Company, 25 Eastmans Road, Parsippany, NJ 07054
Tel: (973) 386-9696 • [email protected] • www.microlab.fxr.com • Fax: (973) 386-9191
Dimensions in mm
Figure 1 - Electrical Diagram (Side A only, Duplicated for Side B)