Upload
luigi-maria-la-sala
View
229
Download
0
Embed Size (px)
Citation preview
8/12/2019 FIAT 500 BlueMe User Manual
1/116
FIATB L U E & M E U S E R S M A N U A L
2 0 1 2
8/12/2019 FIAT 500 BlueMe User Manual
2/116
VEHICLES SOLD IN CANADA
With respect to any Vehicles Sold in Canada, the name
Chrysler Group LLC shall be deemed to be deleted and the
name Chrysler Canada Inc. used in substitution therefore.
DRIVING AND ALCOHOL
Drunken driving is one of the most frequent causes of
accidents.
Your driving ability can be seriously impaired with blood
alcohol levels far below the legal minimum. If you are drink-
ing, dont drive. Ride with a designated non-drinking driver,
call a cab, a friend, or use public transportation.
WARNING!
Driving after drinking can lead to an accident. Your
perceptions are less sharp, your reflexes are slower,
and your judgment is impaired when you have been
drinking. Never drink and then drive.
This manual illustrates and de
tures and equipment that are e
this vehicle. This manual may
features and equipment that a
not ordered on this vehicle. Pand equipment described in th
vehicle.
Chrysler Group LLC reserves
design and specifications, an
improvements to its products
tion upon itself to install them o
factured.
FIAT is a registered trademarkCorporate Communication S
Chrysler Group LLC.
Copyright 2011 Chrysler Gr
8/12/2019 FIAT 500 BlueMe User Manual
3/116
BLUE&ME Users Manual1-888-CIAO-FIAT (1-888-242-6342
CONTENTS
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
The BLUE&ME Hands-FreeCommunication Package . . . . . . . . . . . . . . . . . 5
Message Reader . . . . . . . . . . . . . . . . . . . . . . . 8
Media Player . . . . . . . . . . . . . . . . . . . . . . . . 10
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . 11
Display And Buttons On The Steering Wheel . . . 13
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Front Steering Wheel Butto
Rear Steering Wheel Butto
BLUE&ME Hands-Free CoPackage Quick Reference Gu
Prepare Your Mobile Phon
Important Notes . . . . . .
Try Out The Voice Comma
Pair Your Mobile Phone.
8/12/2019 FIAT 500 BlueMe User Manual
4/116
Making a Phone Call . . . . . . . . . . . . . . . . . . . 21
Message Reader Quick Reference Guide . . . . . . 22
Media Player Quick Reference Guide . . . . . . . . 22
How To Use BLUE&ME Hands-FreeCommunication . . . . . . . . . . . . . . . . . . . . . . . . 24
Steering Wheel Controls . . . . . . . . . . . . . . . . 24
Voice Commands . . . . . . . . . . . . . . . . . . . . . 24
Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
BLUE&ME Hands-Free CommunicationFunction Menu . . . . . . . . . . . . . . . . . . . . . . . 29
BLUE&ME Hands-Free CommunicationFunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Making a Phone Call . . . . . . . . . . . . . . . . . . . 32
Incoming Calls . . . . . . .
Managing Phone Calls .
Conference Call Function
Message Reader Functions How To Read The Last SM
Inbox. . . . . . . . . . . . . .
Managing Messages . . .
Deleting All Messages . .
SMS Notification Settings
Media Player Functions . .
How To Connect The USB BLUE&ME Hands-Free C
How To Manage The Med
2 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
5/116
Playing Audio Tracks . . . . . . . . . . . . . . . . . . 52
Practical Hints For Using The Media Player . . 55
Setting Functions . . . . . . . . . . . . . . . . . . . . . . . 56
Pairing a Mobile Phone . . . . . . . . . . . . . . . . . 57
Managing User Data . . . . . . . . . . . . . . . . . . . 62
Advanced Options . . . . . . . . . . . . . . . . . . . . 65
Media Player Settings . . . . . . . . . . . . . . . . . . 66
BLUE&ME Hands-Free CommunicationSupported Mobile Phones . . . . . . . . . . . . . . . . . 68
Mobile Phones With BluetoothWirelessTechnology. . . . . . . . . . . . . . . . . . . . . . . . . . 69
Supported USB Memory Devices . . . . . . . . . . 70
List Of Available Voice Commands . . . . . . . . . . 74
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . 83
Hands-Free Communicatio
Message Reader . . . . . .
Media Player . . . . . . . .
iPod . . . . . . . . . . . . .
Personal Data Protection .
System Software Use Notice
End User License Agreeme
Grant Of Software LicenseGrants You The Following
Description Of Other RighLimitations . . . . . . . . . .
Upgrades And Recovery M
Intellectual Property Right
Export Restrictions . . . .
BL
8/12/2019 FIAT 500 BlueMe User Manual
6/116
Quick Tips Frequently Asked Questions . . . . 108
What Can I Do With My BLUE&MEHands-Free Communication Package? . . . . . . 108
BLUE&ME Hands-Free Communication
Quick Tips . . . . . . . . . . . . . . . . . . . . . . . . . 108
BLUE&ME Media Playe
BLUE&ME Message Rea
BLUE&ME And The Tom(Portable Navigation Devic
Quick Tips . . . . . . . . . .
4 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
7/116
OVERVIEW
FIATs Windows Mobile based BLUE&ME Hands-Free Communication is a personal telematics system thatincorporates communication and entertainment applica-tions that are expressly designed for use in your car.
The BLUE&ME Hands-Free Communication packageinstalled in your car is equipped with integral hands-freekit, message reader, and media player. BLUE&ME isdesigned to support the future installation of additionalservices.
The BLUE&ME Hands-Free Communication packagefeatures integrated voice recognition, steering wheel con-
trols and a multifunction electronic display that allowsyou to use your Bluetoothwireless technology enabledmobile phone without having to take your eyes off theroad. You can even keep your phone in a pocket or a bag.You are not required to train the voice recognition system
to recognize your voice. The sysdent and performs equally we
With this system, you can also stored on a USB stick or iPodplayback modes with both voion the steering wheel.
This device complies with Pasubject to the following two co
1. This device may not cause h
2. This device must accept aincluding interference that
operationThe BLUE&ME Hands-Fre
Package
The basic characteristic of thivoice recognition with BluetooWith this system you can make
BL
8/12/2019 FIAT 500 BlueMe User Manual
8/116
8/12/2019 FIAT 500 BlueMe User Manual
9/116
Once your phone is paired, you have the option totransfer your mobile phone contacts to the hands-freepackage, to make a phone call either by using thecontacts list or directly pronouncing the phone num-ber, to answer a call, and also answer a second
incoming phone call.
To interact with BLUE&ME you can use eitherbuttons on the steering wheel or voice commands.With voice recognition, you can perform system func-tions by speaking voice commands, also identified askeywords. When the system recognizes a keyword,it will respond with the appropriate action. Voicerecognition is an easy and convenient way to use
BLUE&ME.
All the system functions are available within theBLUE&MEMain Menu. When you are travelling, youcan interact with BLUE&ME using buttons on thesteering wheel or voice commands relevant only to
phone functions(LAST CALLSthe media player. To activate setcan only use voice commands.
The hands-free package enables
Contact calling by voice yyour mobile phone phonebocan also call a contact in yourthrough the entries on the m
(To use this option you havephone contacts to the hands-f
Digit dialing by voice you
by pressing the Windows icothe steering wheel and speaki
To call a SMS text sender sender directly or the sendreceived and stored in the B
BL
8/12/2019 FIAT 500 BlueMe User Manual
10/116
To answer a call you can answer an incoming call bypressing the MAIN/Phone button on the steeringwheel.
Conference call you can call another contact whileyou are engaged in a phone conversation (ConferenceCalling is only supported by a compatible mobilephone).
Call waiting while engaged in a phone conversation,you can receive notification of another incomingphone call, answer the other incoming phone call, andswitch between two ongoing phone conversations.(Call waiting is only supported by a compatible mo-
bile phone.) Refusing an incoming call or ending a call you can
refuse an incoming call or end a current call bypressing the Phone Hang-up button on the steeringwheel.
With your mobile phone in theprocedure complete, connect tBLUE&MEand you can makkeywords or pressing buttonsWhen using the hands-free pho
phone conversation is heard thrMessage Reader
The BLUE&ME message rereading, through the car soundyou receive on your Bluetooenabled mobile phone that are is paired and connected to BLmessage reader does not provid
were received before you enterwith the BLUE&ME systemviations and emoticons arBLUE&MEsystem.
8 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
11/116
NOTE: Not all mobile phones support the SMS textmessage reader function or automatic phonebook trans-fer viaBluetooth. Consult www.fiatusa.com for furtherinformation on the list of compatible mobile phones.
Message reader functions are managed by the controlbuttons on the steering wheel or by the BLUE&MEvoice commands.
TheBLUE&MEmessage reader enables the followingoperations:
To display on the instrument panel multifunctiondisplay a visual notification signal indicating that youhave received a new SMS text on your Bluetooth
wireless technology enabled mobile phone, with send-ers number/name; BLUE&ME will also askwhether to read you the message that has been re-ceived.
To manage the list of SMSBLUE&MEpaired mobile
NOTE: Only messages that wmobile phone was connected listed.
To read the messages receivcan be read multiple times.
To call the SMS text sender steering wheel or voice comm
To delete individual messausing the buttons on the
commands.NOTE: Messages are to onBLUE&MEsystem and not b
BL
8/12/2019 FIAT 500 BlueMe User Manual
12/116
The BLUE&ME system can also recognize and readabbreviations, if any (e.g., ILUVU will be read I loveyou) and can interpret most common emoticons (e.g., :-)will be read Smile), used today to write SMS texts.
Media Player
With the BLUE&ME media player you can play, via thecar sound system, digital audio files stored on a USB stickor iPodby simply connecting it to the USB port locatedin the glove box of the car.
With this feature, you can play your favorite personalmusic collections while you drive.
iPodplayer - refer to MEDIA PLAYER FUNCTIONS.
The media player feature allows the following opera-tions:
Digital audio playback- you can play all your digitalaudio files (.mp3,.wma,.wav,.aac) or play a customizedplaylist (.m3u or.wpl format).
Audio file selection by cateaudio files of a certain categgenre.
NOTE: Each audio file categoconnecting to theBLUE&MEtagged, theBLUE&MEsystethe song title.
Playback options- while plathe following options: Play, Strack, Shuffle and Repeat.
NOTE: The media player does not s
pressed with other formats Management) protected audaudio files that may be presebe ignored.
10 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
13/116
To use the media player, you have to simply connect(directly or by an extension lead) your USB stick oriPod to the car USB port. When the ignition key isturned to ON, BLUE&ME will start building yourmedia library. At the end of this operation you can surf
the whole library and scroll its categories as desiredusing the buttons on the steering wheel or voicecommands. BLUE&ME will then play your selec-tion via the car sound system.
Road Safety
WARNIN
Operating certain parts of ing can distract your attentiand possibly cause an accconsequences; for this reasdisabled by the BLUE&MEconditions are secure and, the car is stopped.
Read and Follow Instructisystem, read and follow allinformation provided in
(Users Manual). Failingfound in this Users Manudent or other serious conse
BLU
8/12/2019 FIAT 500 BlueMe User Manual
14/116
WARNING! (Continued)
Keep Users Manual in the car: when kept in thecar, the Users Manual will be a ready reference foryou and other users unfamiliar with the system.
Please make certain that before using the systemfor the first time, all persons have access to theUsers Manual and read its instructions and safetyinformation carefully.
Do not change system settings or enter data non-verbally (using your hands) while driving. Stopthe car in a safe and legal manner before attempt-ing these operations. This is important, sincewhile setting up or changing some functions youmight be required to distract your attention awayfrom the road and remove your hands from thewheel.
(Continued)
WARNING! (C
General Operation
Voice Command Control: the system may be accomp
commands. Using voice coallows you to operate the ing your hands from the w
Prolonged Views of Screfunction requiring a prolonwhile you are driving. Pullmanner before attemptingthe system requiring proloccasional short scans to tardous if your attention hfrom your driving task at a
12 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
15/116
WARNING! (Continued)
Volume Setting: do not raise the volume exces-sively. Keep the volume at a level where you canstill hear outside traffic and emergency signals
while driving. Driving while unable to hear thesesounds could cause an accident.
Use of Speech Recognition Functions: speech rec-ognition software is inherently a statistical processwhich is subject to errors. It is your responsibilityto monitor any speech recognition functions in-cluded in the system and address any errors.
Distraction Hazard: many features may requiremanual (non-verbal) setup. Attempting to performsuch set-up or entering data while driving canseriously distract your attention and could causean accident or other serious consequences. Stopthe vehicle in a safe and legal manner beforeattempting these operations.
DISPLAY AND BUTTONS ON
WHEEL
Display
NOTE: In this Users Guide,menu entries refer to the multifvisualizes some entries in abbre
Multifunctiona
BLU
8/12/2019 FIAT 500 BlueMe User Manual
16/116
Front Steering Wheel Buttons Rear Steering Wheel Button
The right-hand control is a ropushbutton in the center. Press +. Press the switch down for Vocenter is the SRC button used
(e.g., AM, FM, CD, Media Play
1 MUTE/ESC 3 PHONE HANG UP2 PHONE/MAIN 4 VOICE RECOGNITION(VR)
14 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
17/116
8/12/2019 FIAT 500 BlueMe User Manual
18/116
Button Short press function (less than 1 second)
/MAIN LaunchBLUE&MEMain Menu Dial the number displayed on the display that was accessed
haptically from the phonebook or the recent calls list
Accept an incoming phone call Switch between two ongoing phone conversations (call
waiting) Dial the name/number on the display that was selected/
entered by voice recognition
/ESC Cancel voice recognition Cancel a voice announcement Interrupt message reading
ExitBLUE&MEMain Menu Exit the sub-menu and return to the previous menu option Exit current menu option without storing settings Turn the microphone on/off during a phone conversation Mute the ring tone of an incoming call Media player Pause on/off
16 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
19/116
Button Short press function (less than 1 second)
VOICE RECOG-NITION (VR)
Activate voice recognition Interrupt voice announcement to provide a new voice com-
mand
PHONE HANG UP Reject an incoming call and end a phone call in progress End an active call and switch to a call waiting (on hold)
PRESET UP/OK (leftside back of steeringwheel)
Confirm manually selected menu option Switch phone conversation from the hands-free phone to
your mobile phone and vice versa Select displayed message
SCAN UP /SCANDOWN (left sideback of steering wheel
Scroll BLUE&MEmenu items Scroll though media player tracks
Scroll inbox messagesNOTE: For both operating modes of Voice Command steering
wheel buttons (short or long press), the functionchosen will be activated when you release the button.
When connecting to BLUE&munication for the first time, will automatically be downlonot allowed immediately atime, theBLUE&MEsystem
BLU
8/12/2019 FIAT 500 BlueMe User Manual
20/116
phonebook each time you connect to the system. Forphones containing a SIM card, the phonebook on theSIM card will be downloaded if it is allowed. See yourphones Operating Manual for further details.
BLUE&ME HANDS-FREE COMMUNICATION
PACKAGE QUICK REFERENCE GUIDE
To quickly get started with using the BLUE&MEHands-Free Communication Package with voice recogni-tion andBluetoothwireless technology:
Prepare your mobile phone phonebook
Turn the ignition key to ON
Try out the voice commands Pair your mobile phone
Make a phone call
Instructions for each of the above functions are given inthe following paragraphs.
Prepare Your Mobile Phone
Before creating a pairing relatiobile phone and BLUE&ME tion, you should make sure thatin your mobile phone phoneb
them with the hands-free phonIf your phonebook is empty, quentries for frequently dialed phdetails, consult your mobile ph
To properly enter contacts in yobook, refer to SETTING FUNCTMOBILE PHONE.
Important Notes
The phonebook copied to Bused when the correspondinand connected.
18 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
21/116
Once a mobile phone is paired to the BLUE&MEsystem, the phone will automatically connect/disconnect to theBLUE&MEsystem whenever theignition is turned to ON/OFF. All of theBLUE&MEfeatures are fully functional when the phone is con-
nected toBLUE&ME.NOTE: Some mobile phones may require you to acceptthe BLUE&ME connection, depending on the mobilephone settings.
Entries stored in SIM card or mobile phone memorycan be transferred to BLUE&ME with differentprocedures, according to your mobile phone model.
Try Out the Voice CommandsAt each stage of your dialogue with the system, you canalways use the voice command Help, to get detailedindications about the voice commands available.
To try out theHelp function,
Press the steering whe
AfterBLUE&MEsays Saa tone indicating that voice
Help. BLUE&ME will commands available.
After the general help messatingsand thenHelp. BLUlist of voice commands avmenu.
You can then say or pronoucommands and proceed with
If you need additional help,
wheel button and say Help
BLU
8/12/2019 FIAT 500 BlueMe User Manual
22/116
Pair Your Mobile Phone
CAUTION!
BLUE&ME Hands-Free Communication only al-lows this operation to be performed when the car is
stopped.
To pair your mobile phone, proceed as follows:
Press the steering wheel button and say Set-
tings then, at the end of the BLUE&ME messagesay Pairing.
The system will show the phone pairing PIN number
on the multifunction display. For the next two steps,consult your mobile phone owners manual aboutBluetoothpairing procedures for your phone.
On your mobile phone, searwith Bluetooth wireless teyour mobile phone might beDevice). In this list you will fidentifying the BLUE&ME
select it. When prompted by the mob
number shown on the instrumyour mobile phone keypad. Ifsystem will say Connectindisplay will show a confirmthe paired mobile phone.
It is essential to wait until yomessage on the display. Pressin
on the steering wheel or /E
displayed may cancel the pairinprocess fails, an error message event repeat the pairing proced
20 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
23/116
After the first pairing, BLUE&ME will say Wel-come immediately after connecting. This messagewill no longer be heard when your phone automati-cally connects to the BLUE&ME system on futureignition cycles.
BLUE&MEwill ask if you would like to copy yourpaired phone phonebook toBLUE&ME. It is recom-mended to copy it. To start copying the phonebook sayYes,otherwise say No.
Making a Phone Call
Assume that John Smith is one of the contacts stored inyour phonebook.
To call John Smith, proceed as follows: Press the button and say Call John Smith.
If the name is recognized, the system will display therecognized contacts information on the displayscreen.
If there is just one phone numbphonebook, the system will askJohn Smith. To start the call sNo.
If John Smith has several phone
ask which phone number youCall John Smith (at) Work orwith the type of required phHome).
If John Smith has several phontion (e.g., the type of phone netc.) is missing, the system wcontact and a list of related instrument cluster display. Thetion system will ask if you wounumber displayed. To respondotherwise say No. You canphone number list manually by
BLU
8/12/2019 FIAT 500 BlueMe User Manual
24/116
the back of the steering wheel until you find the requirednumber. Then, press the PRESET UP/OK button on therear of the steering wheel to start the call.
To end the phone call, press the PHONE HANG UPbutton on the steering wheel.
NOTE: If you encounter difficulties with any of the voicerecognition operations, refer to HANDS-FREE COMMU-NICATION PACKAGE - TROUBLESHOOTING.
MESSAGE READER QUICK REFERENCE GUIDE
If your Bluetooth wireless technology enabled mobilephone supports the message reader function, at thearrival of a new SMS text, BLUE&MEplays a tone and
it will ask if you would like to read it.
Say Yes or press the /MAIN button on the
steering wheel or the PRESET UP/OK button on therear of the steering wheel to read the last messagereceived.
SayNoor press the /ES
wheel; the system will storeread it later.
For further details on the messthe section MESSAGE READE
NOTE: If you encounter diffmessage reader settings, refer tTROUBLESHOOTING.
MEDIA PLAYER QUICK REF
To start playing the digital audiostick or iPod, proceed as follow
Copy tracks to your USrecognizes.wma,.mp3.wav afiles and.wpl and.m3u forma
USB sticks without USB wistick (directly or by an extensin the glove box of the car.
22 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
25/116
8/12/2019 FIAT 500 BlueMe User Manual
26/116
HOW TO USE BLUE&ME HANDS-FREE
COMMUNICATION
Steering Wheel Controls
Buttons on the steering wheel are used to performfunctions on the hands-free communication package,
activating voice recognition, using the media playerfunctions, or selecting a BLUE&MEmenu option.
Certain buttons have multiple functions which dependon the current state of the system.
The function chosen in response to a key press is in somecases controlled by the duration of the key press (short orlong).
NOTE: For further information refer to DISPLAY AND BUT-
TONS ON THE STEERING WHEEL.
Instructions concerning manual controls are identifiedin the text by the appropriate symbol.
Voice Commands
Voice commands can be said byneed to change his/her normaheard by the system, since thelocated and oriented to this pur
Voice commands, which are wsystem, are identified as keyw
The hands-free communicationresponds to a preset list of voicavailable voice commands demenu level that you are currenalways available by pressing t
button and saying Help oBLUE&ME is waiting foBLUE&ME also recognizes voice commands, like the namphonebook.
24 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
27/116
There is no voice training required for using voicecommands with this system.
To issue a voice command to the system, press the
steering wheel button and wait for the radio to mute,then listen for Say a command and then a tone indi-
cating that voice recognition is active. Then, speak thecommand in your natural voice at a moderate pace.When the system recognizes the command, it will ac-knowledge your command by speaking a response oracting on your command.
Voice commands are organized according to three in-creasing levels: 1st level, 2nd level and 3rd level.
When a valid* 1st level keyword is said, the system willactivate 2nd level keywords; when a valid 2nd levelkeyword is said, the system will activate 3rd levelkeywords.
If the user says a valid 1st lsubmenu relevant to that comuntil a keyword leading to aninteraction is interrupted or the no command has been given; t
the other lower levels (2nd andNOTE: For the list of availVOICE COMMANDS (KEYWO
* Valid means that the keyworBLUE&ME dictionary andnized by the system for the con
To repeat the last system voice
steering wheel button anthe steering wheel down
The system can issue voice aannouncement is a spoken msystem. To cancel a voice an
BLU
8/12/2019 FIAT 500 BlueMe User Manual
28/116
/ESC to cancel the entire VR session or press the
steering wheel button, wait for the beep and say
Cancel.
A voice interaction is a two-way communication/spokenexchange between system and user. To initiate a voice
interaction, press the steering wheel button andissue a command. To interrupt a voice announcementfromBLUE&MEand say your reply before listening tothe entire voice announcement, press the steering
wheel button and speak your command after the prompt.
To stop an ongoing interaction, press the /ESC but-
ton. You will hear a tone indicating when voice recogni-
tion is deactivated.The hands-free communication Help option can speakthe list of commands available to you at any time,depending on the keyword level that you are currentlyon. To use the Help system, say Help. Listen to the list
of currently available commancommand youd like to issue to
Adjust the volume of phone comfortable and safe while the cthe default volume ofBLUE&M
AUDIO VOL function in the DVD. To temporarily adjust thphone call, press+oror adjusknob. After the phone call is dwill revert back to the original
You can press Vol + or Vol bsteering wheel also to adjust thBLUE&MEvoice announcem
Please remember that to interruyou can always press the
any time during a voice interactcommand.
26 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
29/116
NOTE: After you press the steering wheel button, if you
do not issue a voice command within a few seconds,the system will prompt you to say a voice command.If you do not respond after two or three prompts to
enter a command, the voice recognition session willend. It is the same case with not responding to aquestion during a voice interaction. You will hear atone indicating when voice recognition is deactivated.
When the system fails to recognize your voice com-mand, it will give you another opportunity to say thevoice command again. If you are unsure of whetherthe voice command is appropriate for the given con-
text, say Help.
Using Voice RecognitionThe voice recognition systemrecognize a voice command. Tcommands are always recognizfollowing guidelines:
After pressing the steervoice command after the symand and plays a tone indition is active.
After the system asks a quecommand.
If you want to say a comman
system to finish its announcan press the steeri
shortly to interrupt what the your command.
Speak at a normal volume.
BLU
8/12/2019 FIAT 500 BlueMe User Manual
30/116
8/12/2019 FIAT 500 BlueMe User Manual
31/116
NOTE: This icon is only displayed when the phoneinitially connects to BLUE&ME and is part of themessage that indicates the mobile phones network pro-vider.
NO BLUETOOTH - the connection between
BLUE&ME and the mobile phone is disconnected(e.g., trying to make a call when no phone is con-nected).
Brief display of the name of your current mobilephone carrier (- - - - - - - - displayed if not available).
Information about message received, message senderphone number or name (if stored in the phonebook).
Current BLUE&ME information or current menuoption.
Audio
BLUE&MEHands-Free Comcar audio equipment to deliver phone conversation, media playand tone signals). For this purprogram is muted for the time
You can always adjust the audithe radio or the steering wheel
When the audio system is useradio display will show dedica
BLUE&ME Hands-Free Co
Function Menu
BLUE&ME Main Menu disstructured list. Each option (itviewed on the instrument paneAvailable options enable activator change the settings of your B
BLU
30 BLUE&ME U M l
8/12/2019 FIAT 500 BlueMe User Manual
32/116
The Main Menu includes the following options:
RECENT CALLS- this submenu allows you to view alist of the recent calls made or received. This list iseither downloaded from your mobile phone memory,or accumulated via use of the hands-free phone, or
both.
PHONEBOOK- this submenu allows you to view thephone numbers in your phonebook and to select oneto dial. If there are a large number of entries in yourphonebook, then the items will be contained in groupswithin alphabetical submenus indicating the contactswithin that group. The number of contacts within agroup depends on the amount of entries in your
phonebook.
MESSAGE READER - This submenu enables theability to read the last message received, calling themessage sender or deleting the last message received.It is possible to store up to 20 received messages in the
dedicated inbox and to plamessage sender or to delete thto select notification signalsSMS text. Messages must be rphone is connected to theBLsages that are already presebefore entering the car and tunot accessible
MEDIA PLAYER- this submscroll the digital audio trackartist, genre, album or by pused to select and play tracksto MEDIA PLAYER FUNCTI
SETTINGS - this submenutasks such as managing yourate a pairing relationship, ortion settings.
30 BLUE&ME Users Manual
BLU
8/12/2019 FIAT 500 BlueMe User Manual
33/116
Launching the Main MenuTo launch the BLUE&ME Main Menu, press the
/MAIN button on the steering wheel; you can then
interact with the system using the steering wheel buttons.
Navigating the menu options
To navigate through the items in a menu, press the scanup or scan down buttons on the rear of the steeringwheel.
When the number of characters in a display message istoo long for the allowable number of display characters,the text in the display message will be cut to fit thedisplay size.
To select the option shown on the display, press thePRESET UP/OKbutton on the rear of the steering wheel.
To quit the selected option or to exit a submenu, press/ESC.
BLUE&ME HANDS-FREE C
FUNCTIONS
BLUE&MEHands-Free Command receive phone calls on ytechnology enabled mobile phon(keywords) or the steering whe
By using the voice commandspeople in your phonebook byand/or last name, or you canumbers not stored in your phothe digits of the phone number osender.
By using steering wheel button
calls to people in your phoneboselecting the associated item inPHONEBOOKsubmenus.
BLU
32 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
34/116
In addition, you can use other calling features, such asresponding to incoming calls, re-dial, callback, call wait-ing, reading a message or deleting it.
NOTE: If you encounter difficulties with any of the voice
recognition operations, refer to HANDS-FREE COM-MUNICATION PACKAGE - TROUBLESHOOTING.
Before you can make and receive phone calls using thehands-free communication package, you must create apairing relationship for your mobile phone.
For further information refer to SETTING FUNC-TIONS PAIRING A MOBILE PHONE.
To activate the hands-free communication package,the ignition key must be turned to the ON position.
If during a phone call you turn the ignition key toSTOP, you can continue your conversation through thehands-free communication package for another
15 minutes. After 15 minutesa warning tone and will tranphone.
Making a Phone CallYou can make a phone call us
methods: Calling a contact in your pho
Dialing a phone number usin
Dialing a phone number ukeypad
Calling a phone number u
calls) Calling the sender of a receiv
NOTE: For further informatioOF SMS MESSAGES READERSAGES MANAGEMENT
32 BLUE&ME Users Manual
BLU
8/12/2019 FIAT 500 BlueMe User Manual
35/116
Calling a contact in your phonebookIt is a requirement that you create a pairing relationshipand download your mobile phone phonebook to thehands-free communication system to use this dialingfeature.
To call a contact in your phonebook using manualinteraction, proceed as follows:
Press the /MAIN button on the steering wheel to
open the Main Menu.
Use the Scan Up and Scan Down buttons on therear of the steering wheel to select PHONEBOOK andthen press PRESET UP/OK button on the rear of the
steering wheel.To select the alphabetical grouping which your contactsname belongs to, press thePRESET UP/OKon the rear ofthe steering wheel, then select the required contact.
If the contact has just one pPRESET/OK button or the
wheel to start the call.
If the contact has multiple phonup and scan down buttons on
wheel to view the different phselect the required one by pressbutton or the /MAINbutton
start the call.
To end the phone call, press thebutton on the steering wheel.
Or, using voice interaction:
Assume you would like to call in your mobile phone phonebo
Press and say Call John Smit(on/at) Mobile(in the previouMobile represents the type
BLU
34 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
36/116
would like to call. The phone number type can either be(at) Home,(at) Work, or (on/at) Other).
If the name is recognized, the system will display therecognized contacts information (John Smith, in thisexample) on the display screen.
If John Smith has just one phone number, the system willask if you would like to call John Smith. To start the callsay Yes, otherwise say No.
If John Smith has several phone numbers, the system willask which phone number you would like to call (e.g.,Call John Smith(at) Work or (at) Home?). Answer withthe type of required phone number (e.g., (at) Home ).
If John Smith has several phone numbers but the loca-tion (i.e.: the type of phone number like work, home,etc.) is missing, the system will display the selectedcontact and a list of related phone numbers.
To call the displayed phone num
If the contact is correct but the you can scroll through the phoby pressing Scan Up and Scthe rear of the steering whe
required number, press the steering wheel to start the call.
To end the phone call, press thebutton on the steering wheel.
Practical hintWhen you call a contact with muse the at location portion of
(at) Home,(at) Work,(onshorten the number of steps reqcall.
34 BLUE&ME User s Manual
BLU
8/12/2019 FIAT 500 BlueMe User Manual
37/116
Dialing a phone number using voice commandsTo dial a phone number using voice interaction, proceedas follows:
Press the steering wheel button and say Dial.
The system will respond with Number, please.
Say the phone number as a sequence of single digits (e.g.,0, 1, 2, 3, 4, 5, 6, 7, 8, 9, + (plus),# (pound) or * (star).
For example, 248 555 1212 has to be said as: two, four,eight, five, five, five, one, two, one, two.
The system will repeat the complete phone number and
display it.If the number is complete, say Dial or press the
/MAINbutton on the steering wheel to start the call.
If you have not finished speaking the phone number,
then say the remaining digits press the /MAINbutton on t
the call.
The system will start the call number.
To end the phone call, press thebutton on the steering wheel.
You can say the sequence of digit groups which allows younumber in several small portioated by the pauses you use sequence of digits. If you paus
eral digits, a digit group is crepeat the recognized digits.
If the spoken digits are correcnouncing the phone number. incorrect, you can delete the
BLU
36 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
38/116
Delete. The system will delete the last group of num-bers and display the partially dialed phone number.Then, you can say the digit group again and also theremaining phone number digits.
To cancel the phone call, sayCancel.
To cancel the phone call and start dialing again, sayStart over.
To ask the system to repeat the recognized phone num-ber, say Repeat. If no phone number was dialed, thesystem says No number available.
If the repeated phone number is correct, say Dial tostart the call.
NOTE: When connected toBLUE&MEand dialing aphone number by voice commands, it is essential tominimize background noise in the car and to ask theother passengers to keep silent while you are speakingthe digits. Since the system is speaker independent, it can
also recognize other voices; tnumbers will be accidentally rrect numbers or not recognized
Dialing a phone number usikeypad
Alternatively, you can dial a phmobile phone keypad and thention using the hands-free comm
It is a requirement that you creand that the mobile phone is wfree communication system of y
To dial a phone number using pad, proceed as follows:
Dial the phone number on yoand connect the phone call required by your mobile pho
36 BLUE&ME User s Manual
BLU
8/12/2019 FIAT 500 BlueMe User Manual
39/116
Conduct the conversation using the hands-free com-munication system.
To end the phone call, press the PHONE HANG UPbutton on the steering wheel, or end the phone call
from your mobile phone keypad.
Calling a phone number using call history (recentcalls)RECENT CALLSoption is a list of the recent calls madeor received. It can consist of up to ten incoming calls, upto ten outgoing calls and up to five missed calls.
To dial a phone number using manual interaction, pro-ceed as follows:
Press the /MAIN button on the steering wheel toopen the Main Menu.
Select RECENT CALLS and then press the PRESETUP/OKbutton on the rear of the steering wheel.
The system will present a listhe Scan up/Scan down buttphone number. Then press thon the rear of the steering w
button on the steering wheel
To end the phone call, press button on the steering w
Or, using voice interaction:
To call back the last incoming psteering wheel button an
The system will display informand ask if you would like to c
respond with yes, sayYes,
BLU
38 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
40/116
To redial the last phone number you called, sayRedial.The system will display information about the last con-tact you called and will ask if you would like to redialthis phone number. To redial the last phone numbercalled, say Yes, otherwise say No.
NOTE: If there are no incoming calls stored on theRECENT CALLS list, BLUE&ME will say No re-ceived calls and the display will read No call found.
Incoming CallsWith the hands-free communication system you canrespond to incoming phone calls using the steering wheelbuttons. When a phone call is received, the system willdisplay information about the callers identity, if avail-
able.
The incoming phone call can have a customized ring tone(if this function is available on your mobile phone).
Answering a phone call
To answer the phone call, pre
on the steering wheel.
To end the phone call, press button on the steering w
Rejecting a phone call
To reject the phone call, pressbutton on the steering w
Ignoring a phone call
To ignore the phone call and tone, press the /ESC bu
again to hear the call or ring
BLU
8/12/2019 FIAT 500 BlueMe User Manual
41/116
Answering an incoming phone call during anactive phone conversationTo answer an incoming phone call while another phoneconversation is active, press the /MAINbutton on the
steering wheel. The system will switch to the incomingphone call and put the current phone conversation onhold.
NOTE: Not all mobile phones and carriers support this fea-
ture. Contact the FIAT Dealership or consult thewww.fiatusa.com website for compatible mobilephones
Certain mobile phones support the ability to transmit
your contacts ring tones to the hands-free communi-cation system and play customized ring tones forincoming phone calls. In this case, the incoming phonecalls will have your mobile phone customized ringtones. The ring tone format must be compatible withthe type of audio files that BLUE&MEsupports.
Managing Phone Calls
Transferring a phone conversmobile phone to the hands-fsystemIf you enter the car during a p
your mobile phone and you wversation using the car hands-tem, you can transfer the phon
Proceed as follows:
Get into the car and turn thactivate the hands-free comm
If the permissions on the ph
automatic connection the coferred automatically. Otherwmessage to your mobile phphone support.
40 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
42/116
To transfer the conversation to the hands-free phone,enter the information required by your mobile phone.(This process is different for each mobile phone).
The phone conversation is then transferred to thesystem.
Transferring a phone conversation from thehands-free phone to your mobile phoneTo transfer a phone conversation from the hands-freecommunication system to your mobile phone, press thePRESET UP/OKbutton on the rear of the steering wheel.
You can talk on your mobile phone and still use buttonson the steering wheel. Specifically, you can press the
/MAIN button on the steering wheel to switch be-
tween two phone calls on your mobile phone, or pressthePHONE HANG UP button on the steering wheelto end the active call and activate the call on hold.
Muting a phone callTo mute a phone call on and dithat you can talk without beingpress the /ESC.
Conference Call Function
NOTE: Only with Bluetoothabled mobile phones supportin
With the Conference Call functcontact while you are engaged In this way you can speak with time.
To start a conference call while
phone conversation, call the sedescribed in MAKING A PHON
When the Conference Call optwill showCONFERENCE.
BLU
8/12/2019 FIAT 500 BlueMe User Manual
43/116
To end both calls, press the PHONE HANG UPbutton on the steering wheel. Both calls will be ended atthe same time.
MESSAGE READER FUNCTIONS
If your mobile phone with Bluetoothwireless technol-
ogy supports the message reader function, at the arrivalof a new SMS text,BLUE&MEplays a tone and it willask if you would like to read it (according to set signaltypes).
Even though your mobile phone is paired and connectedto theBLUE&MEHands-Free Communication system,you might not be able to read SMS text messages on theBLUE&MEsystem. To view the list of mobile phones
and functions supported, go to the BLUE&MEwww.fiatusa.com website or contact Customer Servicesat 888-CIAO-FIAT (888-242-6342).
NOTE: For information on signal types, refer to SMSNOTIFICATION SETTINGS.
If you want BLUE&ME toreceived by manual interactiUP/OK button on the rear of message will be read and any acontained in the message will b
Otherwise, press the /ESCread the message but it will stomessage later (for further informREAD THE LAST SMS TEXT R
Or, using voice interaction:
If you sayYes,BLUE&MEwspeak any abbreviations and emOtherwise say No; the systeso you can read it later (for furHOW TO READ THE LAST SM
42 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
44/116
How To Read The Last SMS Text Received
After receiving a message, BLUE&ME will store it(both read or not read messages) in the inbox (refer toINBOX).
To read the last message received, open theBLUE&ME
Main menu and select the optionMESS. READER,thenpress the PRESET UP/OK button on the rear of thesteering wheel. Select the option READ LASTand pressthe PRESET UP/OK button on the rear of the steeringwheel;BLUE&MEwill read the last message received.
Or, using voice interaction:
Press the steering wheel button and pronounce
Read last one;BLUE&ME will read the text of thelast message received.
Inbox
BLUE&ME will store up to 20 received messages (inthe event of linked messages, the number of stored
messages could be lower) wheconnected with Bluetooth. Whnew incoming message will dreceived (even if not yet read). Ijust one message or to delete MANAGING MESSAGES).
To read a particular message stoBLUE&ME Main menu and READER,then press thePRESrear of the steering wheel.
Select theINBOXoption, then pbutton on the rear of the steemessages and select the desir
display the SMS text senders idable. SelectREADand press theon the rear of the steering wheethe selected message.
BLU
8/12/2019 FIAT 500 BlueMe User Manual
45/116
Or, using voice interaction:
Press the steering wheel button and sayMessage
reader, after the audible tone, say Inbox ;BLUE&MEwill display the text senders identificationdata for the first message contained in the inbox (and also
the phone number of the SMS text sender, if stored in thephonebook).
To scroll theInbox,say Previousor Next; when therequired message is displayed, sayRead,BLUE&MEwill read the selected message.
SayDeleteto delete the selected message.
Managing Messages
For every message received, whileBLUE&MEis con-nected to your phone,BLUE&MEcan:
read the message
call the sender directly
delete the message
To access these options when rthe BLUE&ME Main menu SET UP/OK button on the rearselect the desired option.
Or, using voice interaction:
Press the steering wheel bCallor Delete;the system option.
Deleting All Messages
BLUE&ME can store a maxnew incoming message will dceived from the inbox. AlBLUE&MEcan be deleted by
To delete all messages, open menu and select DELETE ALLUP/OK button on the rear of system will askDEL. MESS.?P
44 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
46/116
button on the rear of the steering wheel to delete allmessages, or press the /ESCbutton to cancel.
Or, using voice interaction:
Press the steering wheel button and sayMessage
reader.
After the audible tone sayDelete all;BLUE&MEwillask Delete all messages from the vehicle now ? sayYes to delete all messages, otherwise say No.
SMS Notification Settings
With the BLUE&ME message reader it is possible to setthree notification signals to announce the arrival of a newSMS text:
VIS.+ACOUST.:BLUE&ME will notify you of anew incoming message using a visual signal on theinstrument panel display and through an audible tone.BLUE&MEwill also ask if you would like to readthe message.
VIS. SIGNAL:BLUE&MEincoming message using a viment panel display. The mesread later by pressing the (refer to HOW TO READ RECEIVED AND INBOX).
READER OFF:BLUE&MEreader;a new incoming messand will not be transmitted to
Open the BLUE&ME Main MESS. READER , and then prbutton on the rear of the steerinSIGNAL TYPE and scroll the
using the up and down buttooption and then press thePRESrear of the steering wheel.
BLU
8/12/2019 FIAT 500 BlueMe User Manual
47/116
Or, using voice interaction:
Press the steering wheel button and sayMessage
reader. After the audible tone say Signal type ;BLUE&MEwill list the available options and then youcan select the required one by saying Reader off or
Visual and acoustic signal or Visual signal only.
MEDIA PLAYER FUNCTIONS
TheMEDIA PLAYER menu en
to display tracks stored on y
to play audio files stored on
1 USB Port 2
46 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
48/116
NOTE: Before using the player, refer to COMPATIBLEUSB STORAGE DEVICES to check that your USBmemory device is compatible withBLUE&ME.
How To Connect The USB Device/iPod To
BLUE&ME Hands-Free Communication
To connect your USB device/iPod to BLUE&MEHands-Free Communication, proceed as follows:
Copy tracks on your USB device/iPod (BLUE&MErecognizes.wma,.mp3 and.wav,.aac formats for audiofiles and.wpl and.m3u for playlists).
USB devices without USB wire: just connect the USBdevice/iPod (directly or by an extension lead) to theUSB port on the car.
USB devices with USB wire: use the wire to connectthe USB device/iPod to the USB port on the car.
The multimedia player does not play audio files coveredby digital rights (DRM).
Turn the ignition key to ON. Iis set to ON, BLUE&ME matically when a USB deviport.
IfAUTOPLAY is set to ONplayback automatically wheninto the USB port
NOTE: For the best use ofBLUE&M
use USB devices with maxim
Indexing time will increase present on the media devicexperience, a maximum tota
media device is recommende For further information refe
TION - MEDIA PLAYER.
It is possible to use BLUE&tracks after the media library
BLU
8/12/2019 FIAT 500 BlueMe User Manual
49/116
How To Manage The Media Library
Using the media player you can select the audio filesstored on your USB device/iPod, using voice commandsor the steering wheel buttons.
NOTE: For the best use ofBLUE&ME it is recom-
mended to use USB devices with maximum capacity of32 GB.
You can scroll audio files by folder, artist, genre, album orplaylist and then select the desire category using voicecommands. After selecting the desired category, select thedesired file using the manual controls.
To surf your media library use the track data (e.g., title,artist, album, genre). USB sticks can also be surfed in
folders mode.
NOTE: Not all formats can support media information.
The.mp3 and.wma,.aac recognized formats by
BLUE&MEcan support mthe.wav format files do not. late the title field in the indextrack name for the folder op
For further details, refer to P
USING THE MEDIA PLAYESelection by folderTrack folders on your USB devithe FOLDERS menu (not availa
To select tracks through manuafollows:
Press the /MAIN button to
and selectMEDIA PLAYER,thand press the PRESET UP/OKsteering wheel.
Select FOLDERS , then press tton.
48 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
50/116
Use the Scan Up/Scan Down buttons to scroll throughthe folders. To play all song tracks in all folders, selectPLAY ALL and then press the PRESET UP/OKbutton. Todisplay folder tracks, select the desired folder and pressthePRESET UP/OKbutton.
Scroll the selected folder tracks. To play a desired track,select the title and then press thePRESET UP/OKbuttonon the rear of the steering wheel.
Or, by using voice interaction:
Press the steering wheel button and say Media
Player, then, after the beep, say Advanced USB op-tionsand finally, after the beep, say Folders.
Use the Scan Up/Scan Down buttons to scroll throughthe folders. To play all song tracks in all folders, selectPLAY ALL and then press the PRESET UP/OKbutton. Todisplay folder tracks, press thePRESET UP/OK button.
Scroll the selected folder tracksselect the title and then press thon the rear of the steering whe
NOTE: For further details ocustomization, refer to PRACTI
THE MEDIA PLAYER.Selection by artistTo select a specific artists song t
Press the /MAIN button to
and select MEDIA PLAYER, aTIONSand press thePRESET Uof the steering wheel.
Select ARTISTS and then prebutton.
Use the Scan Up/Scan Down bthe Artists. To play music from artist and press the PRESET U
O b i i i i T l k b l d i
BLU
8/12/2019 FIAT 500 BlueMe User Manual
51/116
Or, by using voice interaction:
Press the steering wheel button and say Media
Player, then, after the beep, say Advanced USB op-tionsand finally, after the beep, say Artists.
Use the Scan Up/Scan Down buttons to scroll the artists
albums. To play all the albums of a desired artist, selectPLAY ALLand press thePRESET UP/OK button.
To play an album by the selected artist, select the desiredalbum and then press the PRESET UP/OKbutton.
To play a track by the selected artist, select the title andthen press the PRESET UP/OK button.
Use the Scan Up/Scan Down buttons to scroll the artistsalbums. To play all the albums of the desired artist, selectPLAY ALL and then press the PRESET UP/OKbutton. Toplay an album by a selected artist, select the desiredalbum and then press the PRESET UP/OKbutton.
To play a track by a selected artipress thePRESET UP/OKbutt
NOTE: If your USB device/iPfiles, theARTISTSmenu will bbetical submenus. The alphabeti
just the first letter of the artists iwill display the first two letters
Selection by genreTo select the tracks by genre uproceed as follows:
Press the /MAIN button to
and selectMEDIA PLAYER,thand press the PRESET UP/OKsteering wheel.
Select GENRES and then prebutton.
O b i i i t ti S l ti b lb
50 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
52/116
Or, by using voice interaction:
Press the steering wheel button and say Media
Player, then, after the beep, say Advanced USB op-tionsand finally, after the beep, say Genre.
Use the Scan Up/Scan Down buttons to scroll the genres.
To play all the tracks of the selected genre, press thePRESET UP/OK button.
NOTE: If your USB device/iPod contains many audiofiles, theGENRESmenu will be subdivided into alpha-betical submenus. The alphabetical submenu will displayjust the first letter of the name of genre it contains (e.g.,A-F), or it will display the first two letters (e.g., Aa- Ar).
Selection by albumTo select an album using manufollows:
Press the /MAIN button to
and selectMEDIA PLAYER,th
and press the PRESET UP/OKsteering wheel.
Select ALBUMS and then prebutton.
Use the Scan Up/Scan Down bthe albums. To play music fromthe album and press the PRESE
Use the Scan Up/Scan Down bthe album tracks. To play all selectPLAY ALLand press the
To play just one track, select thPRESET UP/OK button.
O b i i i t ti j t th fi t l tt f th lb
BLU
8/12/2019 FIAT 500 BlueMe User Manual
53/116
Or, by using voice interaction:
Press the steering wheel button and say Media
Player, then after the beep, say Advanced USB op-tionsand finally, after the beep, say Albums.
Use the Scan Up/Scan Down buttons to scroll through
the albums. To play music from a desired album, selectthe album and press the PRESET UP/OKbutton.
Use the Scan Up/Scan Down buttons to scroll throughthe album tracks. To play all the tracks in the all thealbums, selectPLAY ALLand press thePRESET UP/OKbutton.
To play just one track, select the track title and press the
PRESET UP/OK button.NOTE: If your USB device/iPod contains many audiofiles, theALBUMSmenu will be subdivided into alpha-betical submenus. The alphabetical submenu will display
just the first letter of the albumsit will display the first two lette
Selection by playlistPlaylists stored in your USB dplayed with thePLAYLISTSm
To select a playlist using manufollows:
Press the /MAIN button to
and selectMEDIA PLAYER,thand press the PRESET UP/OKsteering wheel.
SelectPLAYLISTSand press the
Use the Scan Up/Scan Down blists. To play a displayed playlipress thePRESET UP/OKbutt
Or by using voice interaction: To start PLAY ANYTHING u
52 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
54/116
Or, by using voice interaction:
Press the steering wheel button and say Media
Player, then after the beep, say Advanced USB op-tionsand finally, after the beep, say Playlists.
NOTE: For further details on how to build playlists,
refer to PRACTICAL HINTS.
Playing Audio Tracks
NOTE: For managing audio files on iPod or iPhonedevices, refer to TECHNOLOGIES SUPPORTED BYBLUE&ME Hands-Free Communication, MANAG-ING AUDIO FILES FROM IPOD DEVICES.
Shuffle playback of the whole media library
The option PLAY ANYTHING can be used to quicklyplay the whole content of your media library at random.
To start PLAY ANYTHING uproceed as follows:
Press the /MAIN button to
and selectMEDIA PLAYER,thand press the PRESET UP/OK
steering wheel.SelectPLAY ANYTHINGand pbutton.
Or, using voice interaction:
Press the steering wheel
Player, then after the beep, stionsand finally, after the bee
For further details on digital audDIGITAL AUDIO SELECTION.
Audio play Play
BLU
8/12/2019 FIAT 500 BlueMe User Manual
55/116
Audio playTo start playing an audio file using manual interaction,proceed as follows:
If the AUTOPLAY option is on, connect your USBdevice/iPod to BLUE&ME ;track playback will startautomatically.
You can also select the required audio file and then pressthe PRESET UP/OK button on the rear of the steeringwheel.
Or, using voice interaction:
Press the steering wheel button and say Play
anything.
PauseTo pause the track being played: Press the /ESCor the
MUTEbutton on the radio.
PlayTo resume playback of the p
/ESC button, or theMUTE
StopTo stop playing a track: press
button and say Stop. To resusteering wheel button an
Next trackTo play the next track using maas follows:
While playing a digital track prsteering wheel button.
Or, using voice interaction:While playing a digital track,
wheel button and say Next.
Previous Track NOTE: For further details on
54 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
56/116
Previous TrackTo play the previous track using manual interaction,proceed as follows:
While playing a digital track press the Scan Downrear steering wheel button.
Or, using voice interaction:
While playing a digital track, press the steering
wheel button and say Previous.
NOTE: If thePrevious track (manual or voice) com-mand is given after playing the first 3 seconds of thetrack, the track will be started over. If it is given withinthe first 3 seconds, the previous track will be played.
Changing audio sourcesTo change the current sound source (Radio, CD, CDChanger, Media player), press the PRESET UP/OKbut-ton on the rear of the steering wheel or FM, AM orMEDIAbuttons on the radio.
NOTE: For further details onwords) to be used with the medCOMMANDS (KEYWORDS) - S
iPodcompatibilityWhat I can do
Listen to tracks in digital qu Select tracks by category (Ar
by voice control or using thewheel
Recharge the iPodvia USB
NOTE: The device must be in playb
start playing a track on some Load the tracks onto the iPo
the procedure specified in th
It is advisable to keep telephofor optimal operation with th
What I cannot do multimedia files must be pr
BLU
8/12/2019 FIAT 500 BlueMe User Manual
57/116
What I cannot do
Play audio tracks in m4p, and mp4 formats
Play audio tracks purchased on digitally protectedtracks (DRM) (only on certain iPoddevices and USBsticks)
Practical Hints For Using The Media Player
Scrolling
To optimize scrolling of theFOLDERSmenu, organizefolders on your USB stick before connecting it toBLUE&ME. To facilitate and to optimizeFOLDERSmenu selection, organize your tracks in folders withnames that mean something to you.
Organize media files
In order to make the musical selection onBLUE&ME based on predefined selection criteria(author, album, type, etc.), information contained in
multimedia files must be prupdate file data, follow the inmedia file management softw
If certain items in your librarTitle and Genre,BLUE&MEin ALBUMS and GENRESquired data, follow the inssoftware instruction manual.
Building the media library oHands-Free Communication
Building the media library mIf the time required is excessreducing the number of audio
device/iPod.
While building the library, random track selection. BLUlibrary while playing music.
Building playlists for BLUE&ME Hands-Free Click on Save
56 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
58/116
Building playlists for BLUE&ME Hands FreeCommunicationFor building.m3u or.wpl playlist forBLUE&MEusingMicrosoftWindows MediaPlayer, proceed as follows:
Copy required tracks into a new folder or to your USBmemory device.
Open MicrosoftWindows MediaPlayer. Select File, and then Openfrom the menu.
Scroll the content of the USB device/iPodconnectedto your computer and select the audio files to beentered in the playlist (only available on certain iPoddevices).
Click on Open. Move to Fileand select Save Now Playing List As....
In fieldFile Nameenter the required name and in fieldSave as typeset the type:.wpl or.m3u.
Click on Save.
When the above steps are comor.wpl will be built.
SETTING FUNCTIONS
The SETTINGS menu enables
lowing functions:
Pair a mobile phone
Manage user data
Change the Media player set
View the Advanced options
NOTE: The settings submenusing the steering wheel button
To perform functions and adjusmenu, you may use the buttonsvoice commands while the veh
the vehicle is moving, you can use voice commands only. NOTE: Some mobile phones
BLU
8/12/2019 FIAT 500 BlueMe User Manual
59/116
the vehicle is moving, you can use voice commands only.Instructions are provided for both methods.
NOTE: If you encounter difficulties with any of theBLUE&MEsettings, refer to TROUBLESHOOTING.
Pairing a Mobile Phone
Before you can use your mobile phone with the hands-free communication function on your car, you mustcreate a pairing relationship between the mobile phoneand the hands-free communication system.
During the pairing procedure, the hands-free communi-cation system attempts to detect a Bluetooth wirelesstechnology enabled mobile phone within range, and thenestablishes the connection using a Personal Identification
Number (PIN). After a pairing relationship is established,you can use the hands-free communication system tomake and receive phone calls, and do other operationsvia your wirelessly-connected mobile phone.
NOTE: Some mobile phoneschange or access permissionBLUE&ME to automatically bile phones manual for more in
IMPORTANT!The mobile phona special PIN generated randoand used just for this operationand therefore it is not requiredmind; losing it will not impair tcation system operation.
The pairing procedure will ononce for your mobile phoneBLUE&MEwill automaticall
each time you get into the car anON.
You can create a pairing relationoption in the SETTINGSmenu
To create a pairing relationship using manual interaction, wireless technology enabled m
58 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
60/116
To create a pairing relationship using manual interaction,proceed as follows:
Press the /MAINbutton to open the Main Menu, then
select SETTINGS by pressing the PRESET UP/OK but-ton.
Select PAIRING and then press the PRESET UP/OKbutton. The system will start the pairing procedure.
BLUE&ME will show the mobile phone pairing PINon the instrument panel display and announces it. Pleasenote that this is a PIN used just for this operation; it is notyour SIM PIN.
For the next two steps, consult your mobile phone
owners manual about Bluetooth
pairing.On your mobile phone, query for Bluetooth wirelesstechnology enabled mobile phones that are within range(this option on your mobile phone might be calledDiscover, New Device, etc.). View the list ofBluetooth
wireless technology enabled mBLUE&ME(item that identificar).
When prompted by the mobinumber shown on the instrumeing is successful, the system withen the display will show the
It is of vital importance to waimessage is displayed, since p
button or the /ESC button
process. If pairing fails, an erplayed and the pairing procedu
After pairing, the system will
ately after connecting. This mheard the next time the phone c
The system will ask if you wouldphones phonebook. It is recom
start copying the phonebook, press the PRESET UP/OK wireless technology enabled m
BLU
8/12/2019 FIAT 500 BlueMe User Manual
61/116
py g p , pbutton; otherwise press the /ESC button. You can
download your phonebook at a later time using themenu option SETTINGS, USER DATA, or PHONE-BOOK.
Or, using voice interaction:
Press the button and say Settings, wait for the
tone then say Pairing.
The system shows the mobile phone pairing PIN on theinstrument panel display and repeats it.
For the next two steps, consult your mobile phoneowners manual about Bluetoothpairing.
On your mobile phone, query for Bluetooth wirelesstechnology enabled mobile phones that are within range(this option on your mobile phone might be calledDiscover, New Device, etc.). View the list ofBluetooth
gyBLUE&ME (item that identmunication package in your car
When prompted by the mobinumber shown on the instrumyour mobile phone keypad. If system will sayConnectingashow the paired mobile phone
It is of vital importance to waimessage is displayed, since pre
/ESC buttons at this time
process. If pairing fails, an erplayed and the pairing procedu
The first time a phone connect will say Welcome immediatemessage will no longer be heardconnects to the system.
The system will ask if you would like to copy your enter Tanja as Tanya, to
60 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
62/116
y y py yphones phonebook. Copying is recommended. To startcopying the phonebook, say Yes;otherwise say No.
For certain mobile phones the phonebook is not copiedautomatically, in this case you must send the contacts inyour mobile phones phonebook to the BLUE&MEhands-free communication system using your mobilephone keypad.
Practical hintsTo improve both the voice recognition of your phone-book entries and BLUE&ME pronunciation accuracywhen repeating the entries, please try to enter contactentries and memorize them using the following criteria:
Avoid abbreviations.
Write foreign names according to the way in whichthey are pronounced according to the rules of theBLUE&MElanguage set on your car. For example,
j y ,curacy and also to obtain thethe system.
When adding or editing coappropriate accent marks wthese marks to be properly nized by the system. For exbora as Nicol Rbora to ociation.
When adding or editing contthat certain capital letters mnumerals (e.g., V may be rea
When calling contacts by v
middle names or middle init
NOTE: Depending on the size
BLU
8/12/2019 FIAT 500 BlueMe User Manual
63/116
You only need to pair your mobile phone a single time.
You can pair up to five mobile phones, but only onephone can be used at a time. To use one of the otherpaired phones, the currently connected phone needs tobe powered off or its Bluetooth setting must beturned off. BLUE&ME will then search the pairedphone list looking for a phone to connect to.
On your paired mobile phone, the Bluetoothsettingmust be turned on in order to connect your mobilephone with BLUE&ME Hands-Free Communica-tion.
Before transferring your mobile phone contacts to the
hands-free communication system, make sure thateach contacts first and last name is unique and dis-tinctly recognizable to improve the voice recognitionresults.
p gBLUE&ME may take somcheck for updates. So, if you a phone call after gettingBLUE&MEsystem may te
The system will download oA valid contact entry must inleast one phone number.
If you would like to re-pair ythe old pairing relationship fiall paired phones and theiinformation will be deleted. from the system, from the UDELETE USERS. On youBLUE&ME from the lisphones following the specimobile phone (refer to youmanual).
If you download a phonebook with a contacts list BLUE&ME. Not all phones su
62 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
64/116
including more than 1000 contacts, the system mayoperate slower than expected and voice recognition ofthe names in your phonebook may be degraded.
If the pairing list is accidentally deleted, the pairingprocedure will be repeated.
Managing User Data
You can manage the user data used by BLUE&MEbyentering theUSER DATAmenu. The phonebook can bedeleted, all paired phones and their associated phone-book data can be deleted, or all data can be deleted. If alldata is deleted then the memory inBLUE&MEwill berestored to its initial empty condition. If the phonebookhad not been previously downloads during the phonesinitial pairing then you can choose to download it now oryou can copy individual contacts from you phone to
loading or copying individual .fiatusa.com for further informpatible mobile phones.
To open the USER DATA mention, proceed as follows:
Press the /MAINbutton to o
select SETTINGSby pressing tton.
Select the USER DATA and UP/OKbutton.
Or, using voice interaction:
Press the button and saafter the tone then say User d
In theUSER DATAmenu you cfunctions described below.
8/12/2019 FIAT 500 BlueMe User Manual
65/116
To delete the phonebook using manual interaction, pro- To download a paired mobile
64 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
66/116
ceed as follows:
SelectDEL. PHONEBOOK and then press the PRESETUP/OKbutton.
The system will display the question DEL. PHONE-
BOOK?. To confirm, press the PRESET UP/OK buttonOr, using voice interaction:
Press the button and say Settings wait for the
tone and then say Delete phonebook.
The system will ask Delete copy of phonebook fromthe system?To confirm, say Yes.
Download the phonebookIf you chose not to download the phonebook during thephone pairing procedure, or if you recently deleted thecurrent phonebook, the USER DATA option will beavailable in thePHONEBOOKmenu.
manual interaction, proceed as
Select PHONEBOOK and thUP/OKbutton.
Or, using voice interaction
Press the button and saytone and then say Download
Add contactsTo copy contacts from your mofree communication system usproceed as follows:
Select ADD CONTACTS and
UP/OKbutton.
Or, using voice interaction:
Press the button and say
tone and say Add Contacts.
Then follow the instructions given on your mobile phone l f f i
Advanced Options
T i h ADV OPTIO
BLU
8/12/2019 FIAT 500 BlueMe User Manual
67/116
owners manual for transferring contacts.
Reset user dataTo reset all user data to the default values using manualinteraction, proceed as follows:
Select DELETE ALL and then press the PRESET UP/OKbutton.
The system will display the question Delete all?. Toconfirm, press the PRESET UP/OKbutton.
Or, using voice interaction:
Press the button and say Settings, wait for the
tone and then say Reset All.
The system will askDelete all data saved by users fromthe system?. To confirm, say Yes.
To navigate to the ADV. OPTIOinteraction, proceed as follows:
Press the /MAINbutton to o
select SETTINGS by pressing tton.
Select ADV. OPTIONS and tUP/OKbutton.
Within the ADV. OPTIONS mdevice ID.
NOTE: This code is an 8-digit nuniquely identifies theBLUE&Myour car and cannot be change
Accessing the Image IDT th I ID b l i t ti d
Accessing the device IDT th d i ID b
66 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
68/116
To access the Image ID by manual interaction, proceed asfollows:
Select Image ID and then press the PRESET UP/OKbutton.
The instrument panel display will show yourBLUE&MEImage ID code.
Accessing the Application IDTo access the Application ID by manual interaction,proceed as follows:
Select Application ID and then press thePRESET UP/OKbutton.
The instrument panel display will show yourBLUE&MEApplication ID code.
To access the device ID by manufollows:
Select device ID and then prebutton.
The instrument panel dispBLUE&MEdevice ID.
Media Player Settings
AutoplayWhen the Autoplay option is onto play the audio files on your Uturn the ignition key ON. Oncethe first time you use the plautomatically.
To change the Autoplay setting using manual interaction,d f ll
ShuffleU th Sh ffl ti t h
BLU
8/12/2019 FIAT 500 BlueMe User Manual
69/116
proceed as follows:
Open the Main Menu, select MEDIA PLAYER, SET-TINGS, AUTOPLAY and then press thePRESET UP/OKbutton.
To activate Autoplay, select AUTOPLAY ON and pressthe PRESET UP/OK button. To deactivate Autoplay,select AUTOPLAY OFF and press the PRESET UP/OKbutton.
Or, using voice interaction:
Press the and say Autoplay on or Autoplay
off.
NOTE: If you change the Autoplay settings after con-necting the USB device, the new setting will be activatedthe next time you connect a different USB device (or thesame USB device with an updated track library).
Use the Shuffle option to changWith the Shuffle option on, digital audio files at random.
To change the Shuffle setting uproceed as follows:
Open the Main Menu, selectTINGS, SHUFFLE and then prbutton.
To activate the Shuffle option, press thePRESET UP/OKbuttoSHUFFLE OFF and press theP
Or, using voice interaction:
Press the button and say
off.
RepeatUse the Repeat option to repeat a track
Exit the settings menuAt the end of any of the operati
68 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
70/116
Use the Repeat option to repeat a track.
To activate the Repeat option using manual interaction,proceed as follows:
Open the Main Menu, select MEDIA PLAYER, SET-
TINGS, REPEAT and then press the PRESET UP/OKbutton.
To activate the Repeat option, select REPEAT ON andpress thePRESET UP/OKbutton. To deactivate it, selectREPEAT OFF and press the PRESET UP/OK button.
Or, using voice interaction:
Press the and say Repeat onor Repeat off.
NOTE: With the Repeat option on, the previous andnext commands will play the previous or next track andthe new track will be repeated.
At the end of any of the operatican exit the SETTINGS menu amessage will disappear from 10 seconds.
To exit the SETTINGS menu us
Select EXIT and then press the
BLUE&ME HANDS-FREE C
SUPPORTED MOBILE PHON
BLUE&ME Hands-Free Cyour personal devices via Blueogy and USB.
To get updated information aboBLUE&ME, contact a FIAT Ddedicated website at www.fiatu
Mobile Phones With Bluetooth Wireless
Technology
Pull phonesPull phone means that your
BLU
8/12/2019 FIAT 500 BlueMe User Manual
71/116
Technology
BLUE&ME Hands-Free Communication supportsmost mobile phones withBluetooth1.1 and Hands-Free1.5 profile support (refer to the Bluetooth wirelessconnection specifications given in your mobile phone
owners manual).Due to the different software versions supported onmobile phones, certain functions (e.g., answering a sec-ond incoming phone call, transferring phone a phone callfrom hands-free communication system to mobile phoneand vice versa, etc.) may not be supported as described inthis manual. In any case, phone conversation using thehands-free communication package will not be impaired.
Pull phone means that yourautomatic phonebook downloaless technology, your whole phocally downloaded to BLUE&Mphone pairing procedure and u
phone connects toBLUE&METo consult the list of mobilesupported, consult the dedicatusa.com or Customer Servi(888-242-6342).
Push phones (phonebook ndownloaded)Push phone means that yoursingle contact download with Bnology. After the pairing procethe USER DATA, ADD CONTACbook contacts from your mobile
Mobile phones with message reader (not allmobile phones support reading incoming SMS
Supported digital audio filesThe media player supports aud
70 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
72/116
mobile phones support reading incoming SMSmessages)If your mobile phone can send messages through theBluetooth wireless technology, it is possible to readincoming messages using the BLUE&MEHands-Free
Communication Package, to store them in the dedicatedinbox or to delete them.
Supported USB Memory Devices
USB Memory DevicesThe media player supports most USB memory devices.1.0, 1.1 or 2.0.
NOTE: It is not possible to use USB devices equipped
with a password function.
The media player supports audformats:
Extension Audio Cod
.wma Windows M(Format Ta
WMA1=352files from 5to 48kHz, mcodes all v95kbps to 32mono and sity based, bconstrainedWMA v1 an
Extension Audio Coding
f
NOTE: The media player doecompressed with other formats
BLU
8/12/2019 FIAT 500 BlueMe User Manual
73/116
.mp3 MP3 in two forms: MPEG-1 Layer3 (sampling rates 32 kHz, 44.1 kHzand 48 kHz) and MPEG-2 Layer 3(16 kHz, 22.05 kHz and 24 kHz).Supports the proprietary Fraun-
hofer extension called MP2.5,which adds even lower samplingrates (8 kHz, 11.025 kHz and12 kHz). ISO compliance with thefollowing bitrates (kbps): 16, 32,64, 96, 128, 192. Both Mono andStereo. And Layer 3, VBR and CBRsupport.
.wav Digital audio file, without data
compression..aac MPEG-4, M4A support Sampling
rates: 8, 11, 16, 22, 24, 32, 44,48 kHz Bitrates: 16, 32, 48, 64, 80,96, 112, 128, 160, 192, 224, 256 kbps
compressed with other formatsManagement) protected audio dio files that may be present onignored.
Supported playlist formatsThe media player supports the following playlist for-
Query-based playlists are not s
72 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
74/116
The media player supports the following playlist formats:
.m3u file containing a list of tracks (release 1 and 2).
.wpl Windows-based file containing a playlist.
(playlist capacity limit for this format is 300Kb). Play-lists with extension.wpl can be built with MicrosoftWindows MediaPlayer.
The media player does not support nested or linkedplaylists. Playlist tracks with relative and absolute pathsare supported.
If a file is not in the expected locbe performed.
For further details on how BLUE&ME, refer to PRACTI
THE MEDIA PLAYER.
BLU
8/12/2019 FIAT 500 BlueMe User Manual
75/116
LIST OF AVAILABLE VOICE COMMANDS
The following tables list the voice commands available
74 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
76/116
The following tables list the voice commands availableonBLUE&MEHands-Free Communication. The key-word for each voice command (e.g., the main voicecommand) and the synonyms that may be used areshown.
8/12/2019 FIAT 500 BlueMe User Manual
77/116
76 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
78/116
BLU
8/12/2019 FIAT 500 BlueMe User Manual
79/116
78 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
80/116
BLU
8/12/2019 FIAT 500 BlueMe User Manual
81/116
8/12/2019 FIAT 500 BlueMe User Manual
82/116
BLU
8/12/2019 FIAT 500 BlueMe User Manual
83/116
82 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
84/116
TROUBLESHOOTING
Hands-Free Communication Package
G l di l
BLU
8/12/2019 FIAT 500 BlueMe User Manual
85/116
General - display screen
Problem Probable Cause Possible Solution
Display screen shows:NO PHONEBOOK
And the system says Tocopy the phone book tothe system, go to the Set-tings Menu, and selectUSER DATA. To dial anumber, say Dial.
For pull phones When the system asked The data from
the phonebook will now be copied ontothe system. Continue?, you respondedwith No
You have not downloaded your phone-book via the SETTINGS menu
The downloaded phonebook was de-leted
For push phones You have not sent contacts to the sys-
tem using the ADD CONTACTS proce-dure The downloaded phonebook was de-
leted
For pull phones Use the option P
SETTINGS menphonebook again Enter contact inf
book on your mdownload the pthe section SETTMANAGING USPHONEBOOK F
Use the option A
SETTINGS menthe phonebook oto the system sTING FUNCTIOUSER DATA AN
Problem Probable Cause Possible Solution
Display screen shows: For pull phones For pull phones
84 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
86/116
p yPHONEBK. EMPTY andthe system says Phonebook empty. To add anew contact in the phonebook, go to the Settingsmenu, and select Userdata. To dial a phonenumber, say Dial, fol-lowed by the number.
p p You answered Yes to To use the
phonebook, it is necessary to copy con-tacts to the system. Continue? but thedownloaded phonebook does not in-clude any valid contacts
You have used the option PHONE-BOOK in the SETTINGS menu, but themobile phone phonebook does not in-clude any valid contacts
For push phones You used the ADD CONTACTS option
but did not send any valid contacts tothe system
p p Enter valid cont
and one phone nphonebook on ydownload the pthe section SETTMANAGING USPHONEBOOK F
Use the option ASETTINGS menuyour mobile phothe section SETTMANAGING USPHONEBOOK
Problem Probable Cause Possible Solution
Display screen shows: The paired mobile phone is turned off Turn the paired
BLU
8/12/2019 FIAT 500 BlueMe User Manual
87/116
NO PHONEAnd the system saysNo Bluetooth telephoneis connected.
The paired mobile phone is not withinrange of the system (the mobile phoneshould be located within approximately30 feet of the system)
Bluetoothwireless technology connec-
tion has been disabled on your mobilephone
Make sure that y Make sure that t
technology connphone is enabled
Make sure that tpaired with the
Problem Probable Cause Possible Solution
Display screen shows:DISCONNECTED.
A technical error occurred with the mo-bile phoneBluetoothwireless technol-ogy capabilities
During an ongoing phone conversation,
the mobile phone was taken out of thesystem range
ResetBLUE&Mbile phone off an
ResetBLUE&Mtion key to OFF
Problem Probable Cause Possible Solution
Display screen shows:PAIR FAILED d h
A technical error occurred during thed
Verify the correc
86 BLUE&ME Users Manual
8/12/2019 FIAT 500 BlueMe User Manual
88/116
PAIR. FAILED and thesystem says Pairing un-successful. Please tryagain.
pairing procedure entering it again Reset the mobile
off and on, and procedure see FUNCTIONS - P
BILE PHONEDisplay screen shows:PRIVATE NUMBER
The caller is not recognized as a namestored in the phonebook, or the pairedmobile phone does not have a called IDfeature
The caller has blocked caller ID to pre-vent the system from displaying thecallers name and/or phone number
Enter a contact ibook for the incdownload your again
For phones withor for calls fromblocked, nothingmessage will alw