FEIN SuperCut Cons truction

8/10/2019 FEIN SuperCut Cons truction.

http://slidepdf.com/reader/full/fein-supercut-cons-truction 1/26

INTERIOR

The world’s most powerful renovation system.FEIN S UPER C UT C ONSTRUCTION .

New sets andnew accessories



2

PREFACE

Save time and money –with the FEINSUPER CUT C ONSTRUCTION .

Powerful motor, high-quality materials, outstanding ergonomics –the FEINS UPER C UT C ONSTRUCTION is the most powerful system forinterior and renovation applications. It’s fast, strong, versatile and,of course, durable. It allows you to work up to 350% faster, evenin tough continuous use in heavy-duty sawing applications, whichis hardly surprising, as the new FEINS UPER C UT embodies morethan 40 years of experience in developing durable oscillators forindustry and manual trades.



3

FEIN professional set for heating/sanitary installation Page 14 – 15

FEIN professional set for repairing/replacing windows Page 10 – 11

FEIN professional set for grout renewal Page 16 – 17

FEIN professional set for tile rest oration/bathroom renovation Page 12 – 13

The extensive range of E-C UT saw bladesfor wood, plastic, plasterboard and metalmake the set the powerful system for fastand precise sawing work in interior andrenovation applications.

The ideal system for making cut- outs inpanels and for precise laying of electricalcables, water and heating pipes.

With its special range of accessories,this is perfectly suited to fast, simpleand neat renovation of putty-mountedinsulation windows and replacing oldwindows. It also cuts working time byup to 80%.

The special range of accessories allows

you to cut out damaged elastic sealantsin building construction and civilengineering and cut working tim e by upto 60%. Also suited to removing jointsdamaged by harmful materials.

The powerful system with diamondand carbide-coated tools for perfectlycutting out tiles, removing tile joints andtrimming tile adhesive.

FEIN professional set for interior work with wood Page 8 – 9

The right setfor every professional.FEIN’s expertise has resulted in the development of an outstandingrange of accessories which allow users to perform all the importantspecial applications in most trades as well as a multitude of generalconstruction applications. The FEINS UPER C UT C ONSTRUCTION andthe industry-specific accessory sets give professional tradespeopleeverything they need to achieve the best results in minimum timein tasks which previously required time-consuming manual labour.

CONTENTS

Y o u w i l l f i n d n e w

a c c e s s o r i e s o n

p a g e 21 o n w a r d s.



4

TECHNOLOGY

Satisfies the most stringent requirements in terms of performanceand quality – whether used as a mains or battery-powered tool.

The FEINSUPER C UT C ONSTRUCTION is the unique oscillating powertool on the market and its per formance is consistently focusedon the needs of tough sawing and cutting work. FEIN has therebydeveloped an oscillating tool which permits work to progress atlevels that can otherwise only be achieved with professional jigsawsand sabre saws with numerous applications and materials. At thesame time, this tool can be used for virtually any application, afeature only found in oscillating power tools.

ɰ More than 40 years of experience in oscillation technology. ɰ The high quality you’d expect from a “Made in Germany” tool. ɰ Mains-powered and cordless versions provide the same power. ɰ Unbeatable performance and versatility. ɰ FEIN genuine accessories for the best results and maximumtool life.

ɰ Sets tailored to the relevant needs supplied in a plastic

tool case.

The benefits for you at a glance

Robust metal gearboxhousing for long servicelife even in toughworking conditions.

Outstanding workprogress thanks toconstant oscillation.

Oscillation

Metal gearbox

Patented QuickINclamping system forconvenient and fasttool changes withouta wrench.

QuickIN

Force-fit hexagonal tool holderfor optimum torque transfer.

Tool mounting



Maximum work efficiency – even with a battery.

Even as a battery-powered tool, the FEIN S UPER C UT remainsthe most powerful oscillator with durable professional quality.The work progress and performance delivered are practicallythe same as the mains-powered tool. The modern lithium-iontechnology keeps the weight low and prevents memory effects.As 2 batteries and a powerful charger are supplied, you canwork without interruption even at high loads.

Emission values (sound/vibration) can be found at www.fein.com/vibration

Technical data

Model AFSC 18

Battery voltage V 18

Battery capacity Ah 2.4

Oscillations rpm 11 000 – 18 500

Amplitude Degrees 3.4

Gear box head height mm 80

Weight kg 2.0

Tool holder QuickIN

High capacity and fullperformance of 2.4 Ah evenwhen subject to high load thanksto 10 modern Li-ion cells.Capacity display can be accesseddirectly on each battery.

Fatigue-free working thanks toideal distribution of weight andergonomic shape.

Consistently high performancewith constant speed, even when

loaded, thanks to electronic speedcontrol with tacho generator.

Speed control

Angled motor housing forparticularly compact design andeffective vibration reduction.

Design

Ergonomics

Efficient , high-torque, 18 Velectric motor with identicalperformance to the mains-powered version.

Motor

Li-ion battery



6

TECHNOLOGY

ɰ Long service life. ɰ Quick charger. ɰ Less self-discharge. ɰ Individual cell monitoring protects from overload. ɰ 50 % lighter than NiCd batteries, yet they deliver the sameperformance.

ɰ No memory effect – batteries can be charged at any time.

Constant power

Quick and efficient: the quickcharger charges the battery in25–30 minutes. For continuousworking.

Integrated working

Convenient querying at thetouch of a button: the capacitydisplay indicates the battery’scharge status.

Powerful from the f irst cutto the last: the new FEINlithium-ion technology deliversconstant power until thebattery is completely flat.

Short charge time

Shortened charge time: heatbuild-up is reduced thanksto high-quality battery cellswith low internal resistanceand the battery doesn’t have

to be cooled at outdoortemperatures of up to 45°C.

Endurance and power

For peak and permanentloading: the battery packcontains 10 high-quality Li-ion

cells and features a double-rowdesign. The battery cells usedare designed for high dischargecurrents.

In conjunction with the motor’s high level of efficiency, FEINlithium-ion batteries deliver the perfect combination of low weightand high performance. Their extremely long service lives are theresult of individual cell monitoring, which protects the batteriesfrom overload, overheating and total discharge, and the particularlyefficient charging procedure. The low internal resistance of thehigh-quality cells minimises the build-up of heat in the battery.The battery can therefore be housed in a closed and dust-resistant

housing, which also extends the service life.

FEIN lithium-ion technology for optimumperformance and endurance.

100 %

> 85 %

Competitor:charging phaseonly starts oncethe cell has cooleddown

NiCdNiMh

Li-ion

Low heat build-up

Benefits of FEIN lithium-ion technology

Ah

t

Ah

t



7

Consistent maximum work efficiencythanks to mains connection.The FEINS UPER C UT is the most powerful oscillator with durableprofessional quality. In the mains-powered version, the flexible,extra long 5 m rubber cable enables a wide range of applications onthe construction site.

Technical data

Model FSC 2.0 Q

Power consumption W 400

Power output W 220

Oscillations rpm 11 000 – 18 500

Amplitude Degrees 4.0Cable with plug m 5

Gear box head height mm 80

Weight kg 1.45

Tool holder QuickIN


Fatigue-free working thanks toideal distribution of weight andergonomic shape.

Ergonomics

Large working radius thanks tofinely stranded 5 metre rubbercable of industrial quality.

Industrial cable

Consistently high performancewith constant speed, even whenloaded, thanks to electronic speedcontrol with tacho generator.

Speed control

Maximum performance thanksto high copper content of theFEIN high-power motor, whichis suited to continuous use andoverload.

Motor



PROFESSIONAL SET FOR INTERIOR FITTING WORK WITH WOOD

You can make cut-outs inhard-to-reach places with easewhen fitting kitchens and otherfurniture.

Produces perfect results inshortening door frames. Thanksto the shape, you can saw flushto the surface.

FEIN E-C UT long-life saw bladesoffer impressive high cuttingspeeds and over 3 times thetool life of E-C UT standard sawblades. Thanks to their bimetalteeth they are not affected bynails in the wood.

The long E-C UT long-life sawblades are the alternative tomortise chisels, enabling you towork on-site with constructionwoods up to approx. 80 mm.

The FEINSUPER C UT C ONSTRUCTION does not require any free spacebehind the workpiece. Subsequentcut-outs, for example in fittedskirting boards, can be made atspeed and with precision.

The E-C UT precision saw bladesensure a neat cross-section –ideal for trimming and fitt ing.

Fitting kitchens and furniture Plunging with precision

Shortening door frames

Robust and powerful Trimming and fitting freely by hand

Infinite sawing options

Upping the pace on the construction site – withthe professional set for interior work with wood.Whether you’re dealing with simple on-site installation or fittingfurniture, flooring, doors, lightweight walls or st airs, your workis made considerably easier with the FEIN professional set forinterior work with wood. The FEIN S UPER C UT C ONSTRUCTION offers speed and convenience wherever circular saws, jigsawsand sabre saws are needed and where manual tools previouslyneeded a great deal of manual effort . You therefore no longer

need any free space behind the workpiece. The FEIN S UPER C UT

C ONSTRUCTION can work at any angle and flush to all surfaces.Thanks to the HSS saw blade and the depth stop, you can alsomake long cuts in ready-laid parquet or laminate flooring withease. You can even use it to easily and quickly make precise cutsby hand.

Order number6 35 02 164 01 0

Order number6 35 02 165 01 0

Order number6 35 02 164 01 0

Order number6 35 02 121 01 1

Order number6 35 02 164 01 0

Order number6 35 02 163 01 0



9

The HSS saw blade for woodis excellently suited to accuratesawing e.g. parquet or laminateflooring. Fired stoves cantherefore be subsequentlyfitted with ease, and workingwith wall and ceiling coverings

is child’s play.

The FEINSUPER C UT C ONSTRUCTION can also be used as a high-quality delta sander, e.g. as anaddition to the parquet sandingmachine, particularly whenspace is tight.

FEIN professional set for interior work with wood

Reworking expansion joints Sanding parquet

Order number 6 35 02 153 01 0

Order number6 38 06 129 02 6

The powerful system for interior fitt ing and renovation with special accessories for fast and precise sawing work when fitt ing wood.

For detailed information about the sets, see pa ge 19



10

Neater and faster renovation of windows – withthe professional set for repairing/replacing windows.Do you need to make repairs in the workshop or dismantleor fit new windows on the construction site? The FEINS UPER C UT C ONSTRUCTION with the FEIN professional set forrepairing/replacing windows is perfect for both areas, as it cuts

working time on putty-mounted insulation windows by up to 80%.Old windows can be neatly dismantled on the construction sitewithout damaging walls, tiles, window sills or roller shutter cases,making the work quicker, easier and neater.

PROFESSIONAL SET FOR REPAIRING/REPLACING WINDOWS

Putty-mounted insulation windows can be removed on-site inone piece without the windows having to be broken up using thesegment-shaped cutter blade. This means there’s practically norisk of injury, no time-consuming t idying up and you cut working

time by up to 80%.

Weathered windows are oftenrestored individually whenrenovating listed properties.With the E-C UT universal sawblade, you can precisely cut outdamaged wing parts and replace

them with new wooden parts.

The FEINS UPER C UT is thealternative to compressed airchisels and putty cutters, e.g.for removing putty from singleand multi-layered glazing –with virtually no risk of glassbreakage and no laboriouspreparatory work.

The mushroom-shaped cutterblade cuts insulation windowsat speed and with ease.Undamaged single panes canbe used for repairs elsewhere.Separating materials fordisposal is extremely easy.

Old paints can be removedat speed with the t riangularpolygon sanding pad. A roundbacking pad is available for largesurfaces.

Cutting out putty-mounted insulation glass windows Removing putty from glass

Restoring old windowsRemoving paints

REPAIR

Cutting insulation glass

Order number6 39 03 166 01 6

Order number for sanding pad6 38 06 129 02 6Order number for backing pad6 38 06 195 02 0

Order number6 39 03 128 01 2

Order number6 35 02 148 01 3

Order number 6 35 02 137 01 6



11

DISMANTLING OLD WINDOWS

FEIN professional set for repairing/replacing windows

The HSS saw blade makes itpossible to replace old windowseven in problematic cases. Walldamage can be avoided andthe saw blade lies flush to theframe. It can also cut throughmetal fastenings with ease.

Replacing old windows

E-C UT universal saw blades forall cut-outs and fitting work.Bi-metal teeth make themwell-suited to wood, plastics,plasterboard, plaster, aluminiumprofiles, and even sheet metal.

Cutting out and fitting

The FEINE-C UT saw bladesallow you to remove windowframes rapidly and withminimum effort. The designprinciple virtually eliminates thepossibility of damage to rollershutter cases or window sills.

Removing window frames

Order number6 35 02 163 01 0

Order number6 35 02 147 01 5

Fitting roller shutter case covers

The HSS saw blade for woodcan also make longer, straightcuts. Roller shutter case coversand similar parts can thereby beprecisely produced or adjustedon-site at any time.

Order number6 35 02 153 01 0

Order number6 35 02 137 01 6

The powerful system for interior fitt ing and renovation with special accessories for dismantling old windows and replacing putty-mountedinsulation windows.




12

Replacing tiles with high-precision joints – with theprofessional set for tile restoration/bathroom renovation.When undertaking repair work in sanitary installations, tilesmust be replaced as quickly and as exact ly as possible. Theprofessionals set for tile restorat ion/bathroom renovation givestiling professionals everything they need for the job. It can beused to cut out individual tile joints and replace tiles without

damaging neighbouring ones. Grouting cement materials can becut out with precision, producing the minimum amount of dustand without overcutting, even in corners and radii. It’s ideal forsawing flush to old heating pipes, trimming, cutting out, cuttingand fitting drywall profiles, corner strips or floor panels.

PROFESSIONAL SET FOR TILE RESTORATION/BATHROOM RENOVATION

The 2.2 mm wide diamond-coated segment blade cutsmarble, epoxy resin andconcrete trass joints. Tiles cansubsequently be broken andremoved.

The carbide rasp can removeplaster and screed residue orsand down tile adhesive beforere-tiling at speed and with ease.

New flooring needs a cleansurface. The stopper knifeallows you to remove evenstubborn residue left behind byold floor coverings.

In addition to the 2.2 mm widediamond-coated segment blade,the set also includes an extrathin carbide segment blade,only 1.2 mm wide, for workingwith particularly narrow tile

joints.

Copper heating pipes whichare no longer needed can besawn off flush to the wall orfloor using the stepped E-C UT universal saw blades – even inhard-to-reach places.

The mushroom-shaped cutterblade can remove damaged,elastic silicone or acrylic jointfillers at speed and withoutleaving residue. New jointmaterials can be applied

without the need for rework.

Removing tile joints Working with narrow tile joints

Removing residue Sawing flush to pipes

Scraping off floor coverings Removing silicone and acrylic grout

Order number6 39 03 162 01 7

Order number6 39 03 224 01 0

Order number6 37 31 001 01 4

Order number6 35 02 148 01 3

Order number6 39 03 227 01 0

Order number6 39 03 128 01 2



13

Excellently suited tocutting out particularlyhard tile joints such asextremely waterproofepoxy resin joints inswimming pools.

Cutting out joint materials containing epoxy resins

FEIN professional set for tile restoration/bathroom renovation

The FEINS UPER C UT C ONSTRUCTION is in its element whenrestoring damaged or shabby tiles on large surfaces, e.g. inhotels or housing areas. It’s the ideal tool for cost-effectiverenovation. The job can be done in a decent amount of time –and in comparison to complete renovation, you save around80 % in cost! As an option, the tool is available with dustextraction devices which can be fitted tool-free.

Renovating large surfaces:Renewing tile joints insteadof completely re-tiling.

Order number6 37 31 005 01 0

Order number6 35 02 172 01 0

Order number9 26 02 074 01 4

Sanding down surfaces

Extracting dust

Long-life saw blades

Order number6 37 31 162 01 7

Carbide rasp for sanding downtile adhesive, plaster, filler,concrete and stone. The largeversion delivers particularly

good work progress andefficient machining of severalsquare metres.

For continuous use, rounddiamond or carbide saw bladeswith an extra large diameterare available for maximum toollife and cutting speed. Becausethey are twisted, they achieve aconsiderably longer service life

than segmented blades.

The dust extraction unit forthe FSC 2.0 Q mains-poweredtool can be used to preventdirt and dust, for examplewhen removing thick layersof tile adhesive or several

millimetres of plaster.

Ausführliche Informationen zu den Sets sie he Seite 19

The powerful system for interior fitt ing and renovation withspecial accessories for perfect removal of tiles and joints inbathroom renovation.



14

Installing underfloor heating – withthe professional set for heating/sanitary installation.The prefabricated systems available on the market require longdrying times and relatively large installation heights. Neither of theseare possible in occupied properties. As a consequence, subsequentinstallations required a lot of time and money until now. The FEINprofessional set for heating/sanitary installation provides you witha cost-effective way to f it individual sanitary installations – withouttime-consuming prising open or plaster work.

You can thereby make individual cut-outs directly in the ready-laidpanels with ease. It’s highly precise and produces minimal dust –no matter whether you’re dealing with angular or round cut-outs.You benefit from fewer costs for heat ing and sanitary installations.Heating and hot water pipes and power lines are laid quicker andthe most important tools for removing damaged tile joints areincluded in the set.

PROFESSIONAL SET FOR HEATING/SANITARY INSTALLATION

With the FEIN cutting tool,the channel for hot waterunderfloor heating is cutdirectly in the panel.

Order number6 39 03 162 01 7

A ½ or ¾ inch plastic waterpipe is laid in the individuallymade cut-out (Ø approx.25 mm).

Order number6 39 03 116 01 1

Order number6 35 02 148 01 3

Making cut-outs Laying pipes individually

Installation work Cutting panels

Removing tile joints Sawing flush to pipes

Order number6 39 03 222 01 0 (12 mm)6 39 03 223 01 0 (13 mm)6 39 03 221 01 0 (22 mm)

Tile joints can be cut outwithout damaging neighbouringtiles using the diamond segmentsaw blade. This keeps theamount of dust producedextremely low – ideal for all

repair work or removing oldinstallations.

The straight cutter blade can cutpanels at speed and with ease.You can make all the importantradii as well as straight cuts.

Old copper and plastic pipeswhich are no longer neededcan be removed by sawingflush to the wall with theFEINS UPER C UT and the E-C UT universal saw blades.

All 3 cutting tools are included inthe professional set for heating/sanitary installation: 12 mmfor electrical cables, 13mm forelectric, wall or property heating,and 22mm for underfloor heatingor water pipes.

Order number6 39 03 221 01 0

Order number6 39 03 221 01 0



15

FEIN professional set for heating/sanitary installation

Order number6 37 31 001 01 4

Order number6 39 03 227 01 0

Removing tile adhesive Removing floor coverings

The carbide rasp can removetile adhesive, plaster and screed,enabling the replacement tile tobe quickly fitted.

The enlarged stopper knife canquickly remove carpet, linoleumor PVC floor coverings, tileadhesive and plaster.

The powerful system for interior fitt ing and renovation with special accessories for the key applications in sanitary repairs.




16

Renew grout in record time – with theprofessional set for grout renewal.Grout sealants age and need to be replaced at some point so as tonot damage the building fabric . It’s a cumbersome and exhaustingmanual t ask. The professional set for grout renewal doesn’t onlymake this task easier and a great dea l faster than doing it by hand,but it also requires considerably less energy. In the case of olderproperties, grout sealants containing PCB were also used as wellas the largely safe acrylic or silicone-based grouts. The professional

set for grout renewal includes a dust extrac tion device which issuited to the job and, when used in conjunc tion with an approveddust extractor and the specified protective measures, guaranteesthe best possible health protection. The professional set can quicklyand safely remove all elastic sealants in both exterior and interiorspaces. And you still only need one tool to remove old material androughen joints before filling them in again.

PROFESSIONAL SET FOR GROUT RENEWAL

Order number6 39 03 117 01 5

The diamond cleaning blade cleans and roughens mortar flanksbefore you fill them in again, guaranteeing optimum adhesion ofthe new sealant material.

Order number6 39 03 116 01 1

Order number6 37 19 007 01 0

Cutting out sealants Working with deep joints

Cleaning flanksCleaning and re-sharpening

SAFE JOINT MATERIALS

The straight cutter blade can beuniversally used to cut out allelastic grout sealants. Ideal forlarge properties: the energy-saving handle contained in theprofessional set.

The cleaning block is used tore-sharpen and clean diamondtools, enabling you to removesealant residue and otherimpurities at speed and withease.

Until now, manually workingwith deep joints has been aparticularly difficult task. Thiswill no longer be a problemwith the long cutter blade.

Order number6 39 03 161 01 4



17

FEIN professional set for grout renewal

The FEINS UPER C UT allows youto remove the sealant material,producing minimal dust, with afitted extract ion device.

Order number9 26 02 084 01 0

With the diamond cleaningblade, the extract ion devicecan be used to roughen mortarflanks as well as remove thesealant material.

Order number9 26 02 084 01 0

Working with minimal dust Roughening mortar flanks

HAZARDOUS JOINT MATERIALS (e.g. PCB)

The powerful system for interior fitt ing and renovation with special accessories for grout renewal.




181818

SETSSETS

A perfect match for every need:the FEINSUPER CUT sets.The FEINSUPER C UT system is perfectly matched to the everyday requirementsand needs of its users – with an extensive range of accessories for numerousprofessional applications. You can choose between a mains-powered or cordlessversion, offering the same performance and the best FEIN quality. For numerousindustries, the FEINS UPER C UT is also available in various needs-basedprofessional sets in a pract ical tool case.

Technical dataFEIN S UPER C UT C ONSTRUCTION

Cordless FEIN SUPER C UT

Model FSC 2.0 Q AFSC 18

The powerful oscillator with quick cla mping system for interiorfitting and renovation.

The powerful cordless oscillator with quick cl amping system forinterior fitting and renovation.

QuickINElectronic speed settingMechanical interfaceHexagonal tool mounting5 m industrial cable –Li-ion battery –Power consumption W 400 –Power output W 220 –Oscillations rpm 11,000 – 18,500 11,000 – 18,500Amplitude Degrees 4 3.4Weight [according to EPTA] kg 1.45 2Gearbox head height mm 80 80Cable with plug m 5 –

Battery voltage V – 18Battery capacity Ah – 2.4Order number 7 236 36 50 7 136 01 00

Contents 1 FEIN S UPER C UT FSC 2.0 Q,1 plastic tool case

1 FEIN cordlessS UPER C UT AFSC 18,2 battery pack s (Li-ion),1 rapid charger ALG 30, 1 plastic tool case




1919

SETSSETS

FEIN professional set for repairing/replacing windows

The powerful system for interior fitting and renovation with specia l accessories for dismantling old windows and replacing putty-mounted insulationwindows.

Order number 7 236 36 51 7 136 01 51

Contents

1 FEINS UPER C UT C ONSTRUCTION FSC 2.0 Q 1 FEIN cordlessS UPER C UT AFSC 18,2 battery pack s (Li-ion), 1 rapid charger ALG 30

1 HSS saw blade, ste pped, diameter 100 mm, 1 HSS s aw blade for wood diameter 100 mm, 1 E-C UT long-life saw blade (form 163), 2 E-C UT universal sawblades (form 147, 148), 1 cutter blade, mushroom-shaped, 1 dept h stop, 1 sanding pa d, 5 each of sanding pads ( grain 80, 120, 180), 1 adapter,2 tensioning elements, 1 plastic tool case

FEIN professional set for tile restoration/bathroom renovation

The powerful system for interior fitting and renovation with specia l accessories for perf ect removal of tiles and joints in bathroom renovation.

Order number 7 236 36 53 7 136 01 53

Contents


1 segment blade, diamond- coated (form 162), 1 segment blade, c arbide (form 224), 1 cutter blade, mushroom-shaped, 1 stoppe r knife,2 carbide-coated rasps, triangular, perforated for dust extraction, 2 E-C UT universal saw blades (form 147, 148); 1 adapter, 2 tensioning elements ,1 plastic tool case

FEIN professional set for interior work with wood

The powerful system for interior fitting and renovation with specia l accessories for fast and precis e sawing work when fitting wood.

Order number 7 236 36 52 7 136 01 52

Contents


1 HSS saw blade for wood, diamete r 100 mm, 4 E-C UT long-life saw blades (form 162, 163, 164, 165), 4 E-C UT precision saw blades (form 119, 120,121, 122), 2 E-C UT universal s aw blades (form 147, 148), 1 depth stop, 1 sanding pad, 5 each of sanding pads (gr ain 80, 120, 180), 1 adapter, 2 tensioningelements, 1 plastic tool case



2020

SETS

FEIN professional set for grout renewal

The powerful system for interior fitting and renovation with specia l accessories for grout renewal.

Order number 7 236 36 54

Contents

1 FEINS UPER C UT C ONSTRUCTION FSC 2.0 Q

1 vibration-attenuat ing bail handle, 1 extraction device, 5 cutte r blades, straight (form 117),1 cutter blade, straight, long (form 116), 2 cleaning knives , diamond-coated, straight (form 161), 1 cleaning block,1 metal tool case

FEIN professional set for heating/sanitary installation

The powerful system for interior fitting and renovation with special accessories for the key applications in sanitary repairs.

Order number 7 236 36 56 7 136 01 56

Contents


1 diamond-coate d segment blade (form 162), 3 cut-out tools (12, 13 and 22 mm), 1 cutter bl ade, straig ht, long (form 116),2 E-C UT universal saw blade s (form 147, 148) 1 stopper knife 1 ca rbide-coate d rasp, triangular, perfor ated for dust extrac tion, 1 adapter,2 tensioning elements, 1 plastic tool ca se



2121

ACCESSORIES

FEIN genuine accessories:perfectly matched to the tool and application.

ɰ Outstanding progress in the development of oscillationtechnology guarantees accessories that are optimally matched tothe tool’s movement.

ɰ FEIN genuine accessories are made from high-quality materialsand are therefore designed for extreme loads in pract ical use.

Only FEIN genuine accessories allow you to optimally exploit the versatility and capacity of the FEINSUPER C UT .

ɰ Used in conjunction with the FEINSUPER C UT , the FEIN genuineaccessories guarantee optimum work progress and precision.

ɰ Wide range of unique accessories to satisfy a whole hostof requirements, with numerous exclusive FEIN applicationsolutions.

The new large carbiderasp provides rapid workprogress and is perfectlysuited to sanding downfiller, tile adhesive, concrete,cement and stone. It canalso be used with dustextraction.

The new diamond and carbide saw blades with a diameter of105 mm offer both maximum tool life and, due to the increasedstroke, optimum work progress. The saw blades are availablewith cutting widths of 1.2 mm and 2.2 mm.

Thanks to the patented,mechanical interface, theFEINS UPER C UT can, forinstance, be used with adepth stop too.

New floorings need a cleansurface. The enlarged stopperknife allows you to quickly

remove even stubborn residue leftbehind by old floor coverings andadhesive.

FEINE-C UT long-life saw blades offer impressive high cuttingspeeds and over 3 times the tool life of E-C UT standard sawblades. Thanks to their bimetal teeth, the wooden saw bladesare not affected by any nails (up to diameter of 4 mm),

masonry etc. in the wood.

FEIN E-C UT long-life saw bladesRound saw blades

Depth stop

Rigid stopper knife

Carbide rasp



22

ACCESSORIES

HSS, stepped,countersunk clamping screw for flushworking.

Ømm Qty Order number

6 35 02 145 01 86 35 02 145 02 0

6 35 02 137 01 66 35 02 137 02 0

8585

100100

15

15

Saw bladesHSS, with fine teeth f or precise cutting.Universal use on sheet metals of up toapprox. 1 mm, also doubled, and plastics

Ømm Qty Order number

6 35 02 102 01 66 35 02 102 07 06 35 02 103 01 0

6 35 02 103 05 0

636380

80

252

5

M-C UT saw blade, wideFor making cuts, cut-outs and recessesin sheet metal, plastic, GRP and CFRP,pack of 2.

Width Lengthmm mm Order number

6 35 02 138 01 430 50

Accessories for interiorwork with wood / repairing/replacing windows

50 mm long

50 mm long

50 mm long

50 mm long

50 mm long

Widthmm Qty Order number

6 35 02 124 01 6

6 35 02 124 04 46 35 02 124 03 8

42

4242

1

525


6 35 02 135 01 9

6 35 02 135 03 1

6 35 02 135 02 5

35

35

35

1

5

25


6 35 02 136 01 26 35 02 136 03 4

6 35 02 136 02 8

6565

65

15

25

Width

mm Qty Order number

E-C UT precision saw bladesDouble-row original Japan teeth, forhigh-precision cuts and clean cuttingedges, exact work even by hand.

6 35 02 119 01 0

6 35 02 119 04 86 35 02 119 03 2

35

3535

1

525


6 35 02 121 01 16 35 02 121 04 9

6 35 02 121 03 3

5555

55

15

25


6 35 02 122 01 4

6 35 02 122 04 26 35 02 122 03 6

65

6565

1

525

60 mm long


E-C UT Universal saw bladesWith bi-metallic teeth, stepped, highcutting speed, sheet metal (400 N/mm²)up to approx. 2 mm, aluminium profile,copper pipes, wood, plasterboard andalmost all plastics.

6 35 02 147 01 5

6 35 02 147 02 16 35 02 147 03 7

28

2828

1

525

60 mm long


6 35 02 148 01 3

6 35 02 148 02 96 35 02 148 03 5

44

4444

1

525

Depth stopSuited to all E-C UT saw blades andnon-stepped saw blades.

M-C UT saw blade, narrowFor making cuts, cut-outs and recessesin sheet metal, plastic, GRP and CFRP,pack of 2.

Width Lengthmm mm Order number

6 35 02 158 01 010 50

E-C UT standard saw bladesSet teeth for all work with wood,plasterboard and plastic.

78 mm long


6 35 02 123 01 86 35 02 123 04 6

6 35 02 123 03 0

3232

32

15

25

78 mm long


6 35 02 120 01 2

6 35 02 120 04 06 35 02 120 03 4

45

4545

1

525

HSS saw blade, segmented

Ømm Qty. Order number

100 1 6 35 02 180 01 0100 5 6 35 02 180 02 0

Order number 3 21 27 069 01 0

E-C UT long-life saw bladesBi-metallic teeth, stepped, high cuttingspeed. Extremely durable and robust.For hardwood, softwood and all othertimber-based materials - including thosewith nails. Also perfectly suited toplastics and plasterboard.

78 mm long

78 mm long

50 mm long

50 mm long

Widthmm Qty Order number32 1 6 35 02 162 01 032 5 6 35 02 162 02 0

32 25 6 35 02 162 03 0

Widthmm Qty Order number42 1 6 35 02 163 01 042 5 6 35 02 163 02 042 25 6 35 02 163 03 0



50 mm long



23

Segment saw bladeStepped, for cutting out putty-mountedisolation glass. Pack of 2.

Sanding pad set, non-perforatedFor sanding without extraction.

Qty Order number

6 38 06 129 02 62

Order number 6 39 03 166 01 6

Adapter Needed to hold accessories with a roundholder (e.g. rasps, sanding pads andpolishing pads).

Order number 6 37 33 005 01 0

Sanding sheet set for sanding padFor universal use on practically all surfaces.Effective material removal guaranteed thanksto corundum sanding grits and full bondingwith artificial resins. Sanding sheets, non-perforated, with hook and loop fastening,

10 each of grit 60, 80, 120, 180, 240.

Order number 6 37 17 082 03 3

Sanding set, stoneCan be universally used for working withstone and stone products. Consisting of:Sanding sheets, non-perforated, 5 each of

grit 40, 80, 120, 220, 320, 400, 600 and

800, sanding pad, 1 of each, unperforated,with aluminium and plastic backing plate,1 felt polishing pad.

Order number 6 38 06 129 06 7

Sanding sheets, stone, for sanding padSpecially for working with natural andartificial stone. In 8 stages f or coarse andfine sanding.

Grit Qty Order number6 37 17 120 01 4

6 37 17 121 01 36 37 17 122 01 6

6 37 17 123 01 06 37 17 124 01 8

6 37 17 125 01 26 37 17 175 01 7

6 37 17 176 01 0

40

80120

220320

400600

800

50

5050

5050

5050

50

Extraction set (only for theFSC 2.0 Q corded machine)For all sanding and rasping work withtriangular sanding pads and carbide rasps,including 2 sanding pads, perforated;sanding sheets, perforated, 5 each of

grit 60, 80 and 120; 1 extraction hoodwith suction pipe; 2 hose sockets forhose connection with a Ø of 27 and32 mm and 2 adapters for connecting tothe most common household vacuumcleaners.

Backing pad setØ 115 mm, perforated for dustextraction, fully bonded with artificialresins for effective material removal,hook and loop fastening. Consisting of:1 backing pad, 6 sanding sheets (2 sheetseach of grit 60/80/180).

Order number 9 26 02 074 01 4

Order number 6 38 06 195 02 0

2

Sanding pad set, perforatedFor sanding with dust extraction.

Qty Order number6 38 06 136 02 9

Sanding sheets, perforated, forsanding padFor sanding with dust extraction. Foruniversal use on practically all surfaces.Effective material removal guaranteed thanksto corundum sanding grits and full bondingwith artificial resins.

Grit Qty Order number6 37 17 107 04 96 37 17 108 04 7

6 37 17 109 04 1

6 37 17 110 04 36 37 17 111 04 26 37 17 112 04 5

6 37 17 113 04 96 37 17 114 04 7

6 37 17 115 04 16 37 17 116 04 4

6 37 17 107 01 1

6 37 17 108 01 96 37 17 109 01 3

6 37 17 110 01 56 37 17 111 01 4

6 37 17 112 01 76 37 17 113 01 1

6 37 17 114 01 96 37 17 115 01 3

6 37 17 116 01 6

3640

60

80100120

150180

220240

36

4060

80100

120150

180220

240

55

5

555

55

55

50

5050

5050

5050

5050

50

Sanding sheets for sanding padUnperforated, with hook and loopfastening. For universal use on practicallyall surfaces.

Grit Qty Order number6 37 17 086 04 86 37 17 081 04 6

6 37 17 082 04 96 37 17 083 04 3

6 37 17 084 04 16 37 17 085 04 5

6 37 17 087 04 26 37 17 088 04 0

6 37 17 089 04 46 37 17 090 04 6

6 37 17 086 01 0

6 37 17 081 01 86 37 17 082 01 1

6 37 17 083 01 5

6 37 17 084 01 36 37 17 085 01 76 37 17 087 01 4

6 37 17 088 01 26 37 17 089 01 6

6 37 17 090 01 8

36

40

6080100

120150

180220

240

3640

6080

100120

150180

220240

5

5

555

55

55

5

5050

5050

5050

5050

5050

ACCESSORIES

Cutting pasteLubricant for machining sheet metals.

Order number 3 21 32 020 12 9

Circular knifeHSS, stepped, for universal cutting workin leather, plastic sheets, roofing fabric,fly-screens etc., pack of 1.

Ømm Order number

6 39 03 220 01 0100

Ømm Order number

6 35 02 153 01 0100

Without depth stop

HSS saw blade for wood

Ømm Order number

3 26 07 062 04 0100

Ideal for long, straight cuts and forcutting out laid parquet or laminateflooring.

With depth stop

Cutter bladeMushroom-shaped, for cutting siliconeand soft putty material and for separatinginsulation glass units.Pack of 5

Order number 6 39 03 128 01 2

16

Sanding sheet set for backing pad4 sheets each of grit 60/80/120/180.

Qty Order number

Sanding sheets for backing pad

Grit Qty Order number

6 37 17 230 02 0

6 37 17 227 02 06 37 17 228 02 0

6 37 17 229 01 06 37 17 231 02 0

6 37 17 232 01 0

40

6080

120180

240

16

1616

1616

16

6 37 17 227 01 0



24

Carbide rasp, finger-shapedFor coarse sanding of fillers, tile adhesives,concrete, stone and wood. The finger-shaped version, which is coated on bothsides, is particularly well suited to artisticwork.

Order number 6 37 31 002 01 7

Stopper knifeFor removing coverings and coatings,e.g. underseal, adhesive residues etc.

Segment blade, carbide-coatedCompared to the diamond-coated version,the costs are lower and the service lifeshorter. Also suited to corners and radiiand to working without overcutting.

Cutting line approx. 2.2 mm for all marbleand epoxy resin tile joints.

Segment blade, carbide-coatedExtra thin version. Cutting lineapprox. 1.2 mm, cutting depth max.10 mm. Not suited to very hard epoxyresin or cement joints.

1 6 39 03 225 01 0Qty Order number

5 6 39 03 225 02 0

25 6 39 03 225 03 0


5 6 39 03 224 02 0

25 6 39 03 224 03 0

Saw blades, carbide-coatedCompared to the diamond-coatedversion, the costs are lower and theservice life shorter. Stepped, cutting lineapprox. 2.2 mm, standard for all marble,epoxy resin and concrete trass joints.

Adapter Needed to hold accessories with a roundholder (e.g. rasps, sanding pads and

polishing pads).

Order number 6 37 33 005 01 0

Carbide rasp, triangular,carbide-coatedFor coarse sanding of fillers, tile adhesives,concrete, stone and wood. Suited to usewith or without dust extraction.

Order number 6 37 31 001 01 4

Cutter bladeStraight. Universal blade for virtually allexpansion joints. Pack of 5.

Straight, long, for very deep joints. Packof 5.

Order number 6 39 03 116 01 1

Cutter bladeMushroom-shaped, for cutting siliconeand soft putty material and for separatinginsulation glass units. Pack of 5.

Order number 6 39 03 128 01 2

Segment bladeSegment shape, for V cuts and cuts incorners, pack of 2.

Cuttinglength

Totallength

mm mm Order number

Saw blades, carbide-coatedExtra thin version, cutting line approx.1.2 mm, not suited to very hard epoxyresin or cement joints.

Order number 6 39 03 117 01 5

30 73 6 39 03 132 01 0

ACCESSORIES

Large carbide rasp, triangular,carbide-tippedFor sanding down medium-sized surfaceswith extremely rapid work progress.

Ømm Qty. Order number80 1 6 35 02 155 01 080 5 6 35 02 155 02 0105 1 6 35 02 173 01 0105 5 6 35 02 173 02 0

Lengthmm Qty. Order number64 2 6 39 03 206 01 872 2 6 39 03 227 01 0

Order number 6 37 31 005 01 0

Ømm Qty. Order number80 1 6 35 02 115 01 180 5 6 35 02 115 03 0105 1 6 35 02 167 01 0105 5 6 35 02 167 02 0

Ømm Qty. Order number80 1 6 35 02 116 01 480 5 6 35 02 116 02 0105 1 6 35 02 168 01 0

105 5 6 35 02 168 02 0

Ømm Qty. Order number

80 1 6 35 02 156 01 080 5 6 35 02 156 02 0105 1 6 35 02 172 01 0105 5 6 35 02 172 02 0

Segment blade

Diamond, also for corners and radii andfor working without overcutting. Cuttingline approx. 2.2 mm, standard versionfor all marble, epoxy resin and concretetrass joints.

1 6 39 03 162 01 7

Qty Order number

5 6 39 03 162 03 0

Cutting line approx. 1.2 mm, forextremely thin marble joints. Cuttingdepth max. 10 mm. Not suited to epoxyresin and concrete trass joints.


5 6 39 03 196 02 0

Saw blades

Diamond, steppedCutting line approx. 2.2 mm, standardversion for all marble, epoxy resin andconcrete trass joints.

Cutting line approx. 1.2 mm, forextremely thin marble joints. Not suitedto epoxy resin and concrete trass joints.

Accessories for tile restoration/bathroom renovation, heating/sanitary installation



25

Battery packLi-ion 18 V, 2.4 Ah battery pack with

charge monitoring display.

1 itemOrder number 9 26 04 124 02 0

Charger ALG 30Quick charger for FEIN NC and Li-ionbatteries.

1 itemOrder number 9 26 04 096 01 0

Bail handleFor improved handling of the FEINS UPER C UT during long periods ofcontinuous use. Can also be used in

conjunction with the extraction device9 26 02 084 01 0.

Cleaning block Rhombus for cleaning carbide anddiamond tools.

Cutter bladeStraight. Universal blade for virtually allexpansion joints. Pack of 5.

Straight, long, for very deep joints. Packof 5.

Segment bladeSegment-shaped, for V cuts and cuts incorners, pack of 2.

Work glovesVibration-absorbing, certified inaccordance with EN 388/420, EN ISO10819, EEC No. 0200, no. in pack, 1 pair.

Extraction device

For working with cutter blades (form117) or for diamond cleaning blades(form 161).

Cleaning bladeStraight, diamond-coated, for cleaningmortar flanks before filling them in again.

1 6 39 03 161 01 4

Qty Order number

5 6 39 03 161 03 0

Order number 9 26 02 084 01 0

Order number 6 37 19 007 01 0

Order number 3 21 19 116 01 1

Order number 6 39 03 117 01 5

Order number 6 39 03 116 01 1

Cuttinglength

Totallength

mm mm Order number

30 73 6 39 03 132 01 0

Size Order number9 L 3 21 73 003 00 310 XL 3 21 73 004 00 111 XXL 3 21 73 005 00 5

For making grooves in rigid foam panelsfor electric cables up to 12 mm indiameter. Pack of 2.

For making grooves in rigid foam panelsfor ½" and ¾" hot water pipes and forempty pipes for electrical installation.Pack of 2.

Cutting toolFor making grooves of 13x6.5 mm inrigid foam panels for electrical, wall andunderfloor heating.Pack of 2

Bail handleFor improved handling of the FEINS UPER C UT during long periods ofcontinuous use. Can also be used inconjunction with the extraction device9 26 02 084 01 0.

Cleaning block Rhombus for cleaning carbide anddiamond tools.

Work glovesVibration-absorbing, certified inaccordance with EN 388/420, EN ISO10819, EEC No. 0200, no. in pack, 1 pair.

Extraction set (only for theFSC 2.0 Q corded machine)For all sanding and rasping work withtriangular sanding pads and carbide rasps,including 2 sanding pads, perforated;

sanding sheets, perforated, 5 each of grit 60, 80 and 120; 1 ex traction hoodwith suction pipe; 2 hose sockets forhose connection with a Ø of 27 and32 mm and 2 adapters for connecting tothe most common household vacuumcleaners.

Extraction deviceFor working with diamond tools, canbe fitted tool-free. Dust extractionconnection Ø 32 mm.

Order number 9 26 02 074 01 4

Width Cuttingwidth

Cuttingdepth

mm mm mm Order number

50 13 6,5 6 39 03 223 01 0

Width Plungediameter

mm mm Order number

Width Plungediameter

mm mm Order number

50 12 6 39 03 222 01 0

50 22 6 39 03 221 01 0

Order number 9 26 02 084 01 0

Order number 3 21 19 116 01 1

Order number 6 37 19 007 01 0

Size Order number9 L 3 21 73 003 00 310 XL 3 21 73 004 00 111 XXL 3 21 73 005 00 5

ACCESSORIES

Accessories for AFSC 18

Accessories for grout renewal

Cutting toolFor producing angled elements orcorners in Schlüter® KERDI BOARD.

Cutting depth mm Order number12,5 6 39 03 231 01 0

19 6 39 03 230 01 0

28 6 39 03 229 01 0

38 6 39 03 228 01 0

General accessories

Carbide fileFor deburring and filing cut-outs infibreglass, carbon fibre-reinforced plastic,

plastics and wood, length 50 mm

Qty Order number2 6 37 06 018 01 0



DE: C. & E. FEIN GmbH, Telefon 07173 183-0,www.fein.com

Asia: FEIN Power Tools A sia Limit ed, A1, Phone 2341-1026, www.fein.hk

AU: FEIN Power Tools Pty. Ltd., Phone 1300 798 688, www.fein.com.au

IN FEIN P T l I di P t Ltd Ph 044 43 578 680 f i i

Make the most of the 3-year FEIN PLUS warrantyWe offer the 3-year FEIN PLUS warranty for all your FEIN powertools. All you need to do is register your new FEIN power tool at www.fein.com/warranty within 6 weeks of purchase.

G e r m a n y .

D i a g r a m s n o

t b i n d i n g .

T e c h n

i c a l d e

t a i l s s u

b j e c t

t o c h a n g e .

1 8 8 3 1 7 7 7 0 1 0 0 3

. 1 3 E N

.

If you have any further quest ions or would like to test the FEIN S UPER C UT C ONSTRUCTION ,please contact your specialist dealer who will be happy to help:

Documents

FEIN SuperCut Cons truction