Upload
benard
View
28
Download
1
Embed Size (px)
DESCRIPTION
Fault Test Board. Developed by Allan Goodger Moss Vale TAFE. From Boards originally developed by Ken Postill Ultimo TAFE. Ken’s Board. Faults introduced by 3 x 9 Gang switches. Contacts oxidise, and as a result a high resistance is introduced into the circuit. - PowerPoint PPT Presentation
Citation preview
Developed by Allan GoodgerMoss Vale TAFE
From Boards originally developed by
Ken PostillUltimo TAFE
Ken’s BoardFaults introduced by
3 x 9 Gangswitches
Contacts oxidise, and as a result a high resistance is introduced into the circuit
Limited number of faults can be introduced into the circuit
Very good at developing fault finding techniques in students in realistic scenario
Next
Allan’s BoardFaults introduced bySeparate Fault CardPlugged into a socket
All circuit conductors from every circuit can be modified
All conductors are cut at this set of sockets
Next
Board Contains
Power Circuit
Mixed Circuit
Light Circuit
Hot Water & RangeCircuit
Next
Hot Water&
Range Circuit
Circuit to load is as per all other circuits
Terminates with flying leads
Load characteristics can be modified by the fault card
Next
Fault SocketB&R Enclosure
PJ221507
2 x 3mm groves are routered
into the box lid
Socket PCB is inserted into
slots from the back of the lid
Clamped into position by an insulated metal plateNext
Fault Socket
B&R EnclosurePJ221507 Lid
Vero BoardJaycar Part No HP 9544
Socket StripsFarnell Part No
9728856
Cardboard acting as insulation3mm Mild steel with 3/16”
threads cut into each corner
3/16” Screws
Installed from the front of the lidNext
Socket Pin-Outs
Range
Load
Spare
Range
HW
S
Light
Pow
er 2
Pow
er 1
Pins17-19
Pin16
Pins13-15
Pins10-12
Pins7-9
Pins4-6
Pins 1-3
From Switchboard
From LoadsH
WS
Load
Range
HW
S
Light
Pow
er 2
Pow
er 1
Pin16-18
Pins13-15
Pins10-12
Pins7-9
Pins4-6
Pins 1-3
Only Half of the socket is used
This allows the fault card to be spun around and a second set of
faults can be introduced
Next
Fault CardFault card installed
Next
With Fault Pin 1
Fault card No
See paperwork
Fault CardFault card installed
Next
Without Fault
Fault CardSide View
Next
Back View
Header pinsFarnell Part No 9729038
CB EnclosureLoad side of CBs are easily accessible
By using a 4mm2 (yellow) crimp lug and crimping a 2.6mm Brass welding rod in it
Next
CB Enclosure
Neutrals are easily removedBy the use of turned plugs
NextCable should be min of 50 strand for flexibility
ImprovementsAdd/incorporate a handle into board
Next
ImprovementsAdd/incorporate a handle into boardAdd spacers in-between clamping plate and back of
lid
The front of the lid between the screws tends to bow outward
Next
ImprovementsAdd/incorporate a handle into boardAdd spacers in-between clamping plate and back of
lidPass the socket connecting wires through PCB
before soldering
Solder
Next
Equipment Requirements
See supplied equipment list
Next
More Information?
Moss Vale TAFE Kirkham Street Moss ValePhone: 4868 0132 MondaysMobile: 0418 460 220Email: [email protected]
Contact: Allan Goodger
Next