FACTORY FOR PRODUCTION OF INITIAL DEVICES AND … · FACTORY FOR PRODUCTION OF INITIAL DEVICES AND ELECTRIC DETONATORS. ... (for shooting ammunition and special type of ammo ... and

HOLDING CORPORATION www.krusik.rs

FACTORY FOR PRODUCTION OF INITIAL DEVICES AND ELECTRIC DETONATORS

HOLDING CORPORATIONInitial devices

OVERVIEW OF THE ASSORTMENT

The overview of the assortment can be shown through several elements, such as:

used initial explosives and types of mixtures;a)

type of primer and higher assembly;b)

function;c)

special requirementsd)

a) Following initial explosives are used for production of mixtures: Mercury Fulminate, Lead-Azide (several types), Tetrazene, Tricinate, and with other components (fuels, oxidants, sensitizers,..), the listed mixtures and primers can be classified as: - fulminate type - non-corrosive type.

b) Classified by type of primer and higher assembly, they include:

- berdan (for shooting ammunition)- gevellot (for mortar ammo propellant charges and shotgun ammunition)- boxer (for shooting ammunition and special type of ammo - we are currently involved in intensive development);

c) Classified by function, the existing assortment includes:

- initial (puncturing, firing, striking,…);- duplex (double effect primers);- detonator (with a range of initial and high explosives);- electric and electric inflammatory (depending on use and type of higher assembly)- delay, transmitting, boosting (depending on use).

d) This group includes:

- delays and delay elements for different types of hand grenade fuzes with different types of mixtures used ( adjustment of delay times optiona l); - all types of initial, pyrotechnic, delay, smoke, flash and other types of mixtures,…- all types of electric detonators, No and per special request;

12,7 DShK

4,54,5/9

5,5-15,5 2P15,5-NS-D

6,55 DT TK-23


BERDAN (without anvil, for ammunition)

2.8

5

Ø4.5

1

1

2

3


Assignation: Bullet 7,62 mm

Technical characteristics Item Material Dimensions

1- Cup CuZn28 ½ t 0,42 +0,02 mm2- Disc Foil 0,05 -0,02 mmVarnish type Nitro, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 111,7 gUpper sensitivity limit H+ 5s< 15"Lower sensitivity limit H- 2s> 3"Firing pin Ø2 mm; R1 mmTo be tested in Cartridge case of 7,62 mm TT

Packing

Number of pieces in a cardboard box 4.000 pcsNumber of boxes in a package/ no. of pieces 5 cardboard boxes x 4.000 pcs 20.000 pcsNumber of packages in a wooden case 8 packages x 20.000 pcs 160.000 pcs

Initial primer 4.5

Initial primer 4.5/9

2.8

5

Ø4.5

1

0.3

K/A

r 2.7

5

1

2

3


Assignation: Bullet 9 mm PARA


1- Cup CuZn28 ½ t 0,42 +0,02 mm2- Disc Foil 0,05 -0,02 mmVarnish type Nitro, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 111,7 gUpper sensitivity limit H+ 5s< 15"Lower sensitivity limit H- 2s> 3"Firing pin Ø2 mm; R1 mmTo be tested in Cartridge case of 9 mm PARA

Packing


Initial primer 5.5-2P1

2.6

5

Ø5.50

1.5

52

3

1




1- Cup CuZn28 ½ t 0,71 -0,02 mm2- Disc Foil 0,05 -0,02 mmVarnish type Nitro, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 111,7 gUpper sensitivity limit H+ 5s< 16"Lower sensitivity limit H- 2s> 3"Firing pin Ø2,75 mm; R6,5 mmTo be tested in Cartridge case of 7,62 mm

Packing


Initial primer 5.5-1


3

Ø5.5

1.4

2

3

1




SENSITIVITY:

Ball weight 225,7 gUpper sensitivity limit H+ 5s< 11"Lower sensitivity limit H- 2s> 3"Firing pin Ø2,75 mm; R6,5 mmTo be tested in Cartridge case of 7,9 mm

Packing


Initial primer 6.55-DT

2.9

2

Ø6.551.3

2

Assignation: Bullet 7,62 mm and 7,62 mm manev.

1

2

3




SENSITIVITY:

Ball weight 111,7 gUpper sensitivity limit H+ 5s< 15"Lower sensitivity limit H- 2s> 3"Firing pin Ø2 mm; R1 mmTo be tested in Cartridge case of 7,62 mm DT

Packing


Initial primer 12.7-DŠK

4.1

5

Ø9.07

1.5

22

3

1

Assignation: Bullet 12,7 mm DŠK and 20 mm Hispano



1- Cup CuZn28 ½ t 0,91 -0,03 mm2- Disc Foil 0,03 +0,02 mmVarnish type Nitro, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 307 gUpper sensitivity limit 450 mmLower sensitivity limit 100 mmFiring pin Ø3,45 mm; R2,45 mmTo be tested in Cartridge case of 12,7 mm DŠK

Packing

Number of pieces in a cardboard box 650 pcsNumber of boxes in a package/ no. of pieces 5 cardboard boxes x 650 pcs 3.250 pcsNumber of packages in a wooden case 8 packages x 3.250 pcs 26.000 pcs

Initial primer TK-23

4.3

5

Ø9.07

1.5

20.7

63

4

1

Assignation: Bullet 23 mm

2



1- Cup CuZn28 ½ t 0,91 -0,03 mm2- Disc 1 Foil 0,06 +0,02 mm3- Disc 2 ring CuZn10 0,14 ±0,01 mmVarnish type Nitro, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 307 gUpper sensitivity limit 450 mmLower sensitivity limit 100 mmFiring pin Ø4x2 mm; R0,6 mmTo be tested in Cartridge case of 23 mm

Packing


BOXER TYPE

E-96

E-59 A2 SE-59 A1 S


Initial primer E-96

2.9

Ø5.38

1

2

4

3

Assignation: UD M76P1, VUD and fuze M84



1- Cup CuZn28 ½ t 0,42 +0,02 mm2- Disc 1 Foil 0,05 -0,02 mm3- Three-way anvil CuZn28 ½ t 0,98 -0,08 mm Varnish type Nitro, red4- Mixture Synoxide, non-corrosive

SENSITIVITY:

Ball weight 225 gUpper sensitivity limit H+ 5s< 12"Lower sensitivity limit H- 2s> 3"Firing pin Ø2 mm; R1 mmTo be tested in Tool, bearing, steel

Packing


Initial primer E-59A1S

5.5

Ø8.08

1

2

4

3

Assignation: Gun primer (TK) M55, M28, M41,..



1- Cup CuZn28 ½ t 0,90 0,02 mm±2- Disc 1 Foil 0,05 -0,02 mm3- Anvi bifurcated CuZn28 ½ t 1,22 0,02 mm ±Varnish type Nitro, red3- Mixture Synoxide, non-corrosive

SENSITIVITY:

Ball weight 225 gUpper sensitivity limit H+ 5s< 12"Lower sensitivity limit H- 2s> 6"Firing pin Ø2 mm; R1 mmTo be tested in Body TK, percussive roller, ring

Packing


Initial primer E-59A2S

Assignation: Gun primer (TK) M71

5.5

Ø8.08

1

2

4

3



1- Cup CuZn28 ½ t 0,90 0,02 mm±

2- Disc 1 Foil 0,05 -0,02 mm3- Anvi bifurcated CuZn28 ½ t 1,22 0,02 mm ±

Varnish type Nitro, green3- Mixture Synoxide, non-corrosive

SENSITIVITY:

Ball weight 460 gUpper sensitivity limit H+ 3s< 18"Lower sensitivity limit H- 2s> 6"Firing pin Ø2 mm; R1 mmTo be tested in Body TK, percussive roller, ring

Packing


E-71

E-72 E-72S

E-68

E-84


GEVELLOT TYPE

Ø5.73

7

Ø7.3

0.9

5

1

3

4

2

5

6

Initial primer E-68


Technical characteristics

Item Material Dimensions

1- Cup, outer CuZn10 0,48 +0,02 mm2- Disc 1 Foil 0,045 -0,015 mm3- Disc 2 Foil 0,045 -0,015 mm4- Anvil, gevelot CuZn28 ½ t 0,71 -0,02 mm5- Cup, initial Cu99.5 0,18 +0,015 mmVarnish type Shellac, alcohol, colorless Nitro, green6- Mixture Fulminate

SENSITIVITY:

Ball weight 307 gUpper sensitivity limit 110 mmLower sensitivity limit 5 mmFiring pin Ø4,5 mm; R1 mmTo be tested in Tool, bearing, steel

Packing


Assignation: Practice devices

Ø5.73

7

Ø7.3

0.9

5

Initial primer E-71

1

2

3

4

5


Assignation: Bullet hunting



1- Cup, outer CuZn10 0,48 +0,02 mm2- Disc 1 Foil 0,045 -0,015 mm3- Anvil, gevelot CuZn28 ½ t 0,71 -0,02 mm4- Cup, initial Cu99.5 0,18 +0,015 mmVarnish type Shellac, alcohol, colorless 5- Mixture Fulminate

SENSITIVITY:


Packing


Ø5.73

7

Ø7.3

0.9

5

Initial primer E-72

1

2

3

4

5


Assignation: Ignition cartridges for mortar shells



1- Cup, outer CuZn10 0,48 +0,02 mm2- Disc 1 Foil 0,045 -0,015 mm3- Anvil, gevelot CuZn28 ½ t 0,71 -0,02 mm4- Cup, initial Cu99.5 0,18 +0,015 mmVarnish type Shellac, alcohol, colorless 5- Mixture Fulminate

SENSITIVITY:


Packing


Ø5.73

7

Ø7.3

0.9

5

Initial primer E-72S

1

2

3

4

5




1- Cup, outer CuZn10 0,48 +0,02 mm2- Disc 1 Foil 0,045 -0,015 mm3- Anvil, gevelot CuZn28 ½ t 0,71 -0,02 mm4- Cup, initial Cu99.5 0,18 +0,015 mmVarnish type Shellac, alcohol, colorless 5- Mixture Synoxide, non-corrosive

SENSITIVITY:


Packing


Assignation: Fuze for bullet 40 mm

Ø5.73

7

Ø7.3

0.9

5

1

3

4

2

5

6

Initial primer E-84

Assignation: Practice devices




1- Cup, outer CuZn10 0,48 +0,02 mm2- Disc 1 Foil 0,045 -0,015 mm3- Disc 2 Foil 0,045 -0,015 mm4- Anvil, gevelot CuZn28 ½ t 0,71 -0,02 mm5- Cup, initial DVP2, Cu.10 0,18 +0,015 mmVarnish type Shellac, alcohol, colorless Nitro, green6- Mixture Thiocyanate

SENSITIVITY:


Packing


B-37-I B-37-IP1 MG-8 MG-8 S

KV-3V T2H E-67

E-67P1 E-60 KL-41


INITIAL - FUZES

2.2

5

Ø3.05

0.5

Initial primer B-37i

1

2

3


Assignation: Anti-aircraft bullet 57 mm


1- Cup DVP-2 Cu.10 0,3 0,03 mm±2- Disc DVP-1 Cu.10 0,07 0,01 mm±Varnish type Shellac, alcohol, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 100 gUpper sensitivity limit 100 mmLower sensitivity limit 5 mmFiring pin Ø3 mm; 20° 30´To be tested in Tool, bearing, steel

Packing

Number of pieces in a cardboard box 35 pcs in a boxN° of boxes in a cardboard box / no. of pcs 8 box x 35 pcs / 280 pcsNumber of boxes in a package / no. of pcs 5 cardboard boxes x 280 pcs 1.400 pcsN° of packages in a wooden case / no. of pcs 8 packages x 1.400 pcs 11.200 pcs

2.2

5

Ø3.05

0.5

Initial primer B-37i P1

1

2

3


Assignation: Fuze AU-18


1- Cup DVP-2 Cu.10 0,3 0,03 mm±2- Disc DVP-1 Cu.10 0,07 0,01 mm±Varnish type Shellac, alcohol, red3- Mixture Synoxide, non-corrosive

SENSITIVITY:

Ball weight 100 gUpper sensitivity limit 70 mmLower sensitivity limit 5 mmFiring pin Ø3 mm; 20° 30´To be tested in Tool, bearing, steel

Packing


Initial primer E-67

Ø4.4

43

1

5

2

4


Assignation: Fuzesi UTI



1- Cup Cu 99.5 0,5 +0,02 mm2- Disc Foil 0,045 ±0,015 mm3- Disc II DVP-2 Cu.10 0,3 -0,015 mmVarnish type Nitro, red Nitro, green 4- Charge I Fulminate5- Charge II Initial mixture

SENSITIVITY:

Ball weight 55 gUpper sensitivity limit 120 mmLower sensitivity limit 5 mmFiring pin Ø3 mm; 20 30 , Ø0,2 at the top ° ´To be tested in Tool, bearing, steel

Packing


Initial primer E-67 P1

Ø4.4

42

1

5

3

4





1- Cup Cu 99.5 0,5 +0,02 mm2- Disc Foil 0,045 ±0,015 mm3- Disc II Al Mn1 0,3 -0,015 mmVarnish type Nitro, red Nitro, green 4- Charge I Pb-azid, white5- Charge II Synoxide, non-corrosive

SENSITIVITY:

Ball weight 55 gUpper sensitivity limit 120 mmLower sensitivity limit 5 mmFiring pin Ø4,5 mm; 20 30 , 0,1-0,28 at the top, R 0,05 ° ´To be tested in Tool, bearing, steel

Packing


Ø3.85

0.5

4.2

Initial primer KV-3V

2

1

4

3





1- Cup Cu 99.5 0,5 ±0,02 mm2- Disc Al 99.5½t 0,2 ±0,015 mmVarnish type Shellac-alcohol, red3- Initial charge I Synoxide with Pb-azide4- Initial charge II Synoxide with Pb-azide e

SENSITIVITY:

Ball weight g100Upper sensitivity limit 0 mm10Lower sensitivity limit 5 mmFiring pin Ø4,5 mm; 2 30 , r0,05 max, 0, at the top 3° ´ 25To be tested in Tool, bearing, steel

Packing


3.2

Ø3.05

2.7

Initial primer MG-8

2

1

3




1- Cup DVP-2 Cu.10 0,3 0,015 mm±2- Disc DVP-1 Cu.10 0,07 0,01 mm±Varnish type Shellac, alcohol, red3- Mixture Fulminate

SENSITIVITY:

Ball weight 200 gUpper sensitivity limit 50 mm, 200g ballLower sensitivity limit 5 mm, 100g ballFiring pin Ø3 mm; 20 30° ´To be tested in Tool, bearing, steel

Packing


3.2

Ø3.05

2.7

Initial primer MG-8 S

2

1

3




1- Cup DVP-2 Cu.10 0,3 0,015 mm±2- Disc DVP-1 Cu.10 0,07 0,01 mm±Varnish type Shellac, alcohol, red3- Mixture Synoxide, non-corrosive

SENSITIVITY:

Ball weight 200 gUpper sensitivity limit 50 mm, 200g ballLower sensitivity limit 5 mm, 100g ballFiring pin Ø3 mm; 20 30° ´To be tested in Tool, bearing, steel

Packing


2.5

Ø4.6

0.8

Initial primer T2H

2

1

3


Assignation: Anti-aircraft bullet 23, 37 i 40 mm


1- Cup DVP-1 Cu.10 0,3 0,015 mm±2- Disc Foil 0,05 -0,02 mmVarnish type Nitro, red3- Mixture Fulminate

SENSITIVITY:


Packing


2.6

9

Ø3.73

Initial primer E-60/II

3

1

2

4


Assignation: Fuze UTU M93 (TK-150)



1- Cup CuZn10 0,21 -0,02 mm2- Disc Paper, type II, trade quality 0,0889 ±0,0127 mm3- Anvil CuZn28 ½ tVarnish type Nitro, red4- Mixture Thiocyanate

SENSITIVITY:

Ball weight 55 gUpper sensitivity limit H+ 5s< 8"Lower sensitivity limit H- 2s> 1"Firing pin Ø4,5 mm; 28 , represented at 0,38 mm, r0,1 max °To be tested in Tool, bearing, steel

Packing


Initial primer KL-41

6,0

Ø3,88

7

6

5

3

4

2

1


Assignation: Fuze UTU M93 (TK-150)



1- Cup Al 99,5 0,25 ±0,015 mm2- Disc Al 99,5 0,1 ±0,02 mm3- Igniting charge Based on Zr4- Delay charge Si - Pb minium5- Initial charge Pb-azide, white6- Detonating charge I Pentrite7- Detonating charge II PentriteVarnish type Nitro, green

SENSITIVITY:

Activation EZG MB 2NDelay time 30-50 msMaterial action Penetration of Pb-board of 3 mm thicknessTo be tested in Testing tool, photo diode, oscilloscope

Packing

Number of pieces in a cardboard box 35 pcs in a boxN° of boxes in a cardboard box / no. of pcs 4 box x 35 pcs / 140 pcsNumber of boxes in a package / no. of pcs 5 cardboard boxes x 140 pcs 700 pcsN° of packages in a wooden case / no. of pcs 8 packages x 700 pcs 5.600 pcs

M 17 P4 M 24 P4 DK-17

KL-34 P1 KS-1C DK-34

KL-35(DK-8-Cu)

KL-35 P1(DK-8-Cu P1)

PDK-34 IDK-34


DETONATER

8.7

0Ø6.12

Detonating primer M-17 P4

6

5

2

4

7

3

1


Assignation: Anti-tank mine - 4 (TMA-4)



1- Cup Al Mn 1 0,77 ±0,02 mm2- Upper disc Silk cloth 3- Lower disc Al 99,5 0,25 ±0,015 mmVarnish type Nitro, green4- Initial charge 1 Trizinate 5- Initial charge 2 Pb-azide, white6- Brisant charge 1 Tetryl7- Brisant charge 2 Tetryl SENSITIVITY:Initiation Safety fuseInitiator Booster M7AP2To be tested in Tool, Pb blockMaterial action 1 (powder column + M17P4) Penetration of Pb-boards of 3 mm thickness, Ø>=6,12 mmMaterial action 2 (Safety fuse + M7AP2) Extension of Pb block, min 3,0 cm³

Packing


4.2

Ø6.12

Duplex primer M 24 P4

1

2

5

3

4


Assignation: Fuze AU-18; Art. Shells



1- Cup 0, ±0,02 mm Al Mn 1 772- Upper disc 0,05 0,0 mm Al 99,5 - 2

3- Lower disc 0, ±0,015 mm Al 99,5 25Varnish type Nitro, red Nitro, white 4- Initial charge 1 Synoxide, non-corrosive 5- Initial charge 2 Pb-azide, white

SENSITIVITY:

Ball weight 200 gUpper sensitivity limit 40 mmLower sensitivity limit 5 mmFiring pin Ø4,2 mm; 20 30 , sharply ° ´To be tested in Tool, bearing, steelMaterial action Penetration of Pb-boards of 1,65 mm, Ø>=6,12 mm

Packing


8.6

8

Ø6.12

1

5

3

4

Detonating primer DK-17

2


Assignation: Art. Shells



1- Cup 0, ±0,02 mm Al Mn 1 772- Upper disc 0,05 0,0 mm Al 99,5 - 1

3- Lower disc 0, ±0,015 mm Al 99,5 25Varnish type Nitro, red Nitro, green 4- Initial charge Pb-azide, white5- Brisant charge Pentrite

SENSITIVITY:

Initiation Safety fuseInitiator Booster M7AP2To be tested in Tool, bearing, steelMaterial action 1 Penetration of Pb-boards of 3 mm thickness, Ø>=6,12 mmMaterial action 2 Extension of Pb block, min 4,0 cm³

Packing


9.4

Ø4.88

1

6

3

5

Detonating primer KL-34P1

2

4





1- Cup Al Mn 1 0,32 ±0,02 mm2- Upper disc Al 99,5 0,25 ±0,01 mm 3- Lower disc Al 99,5 0,25 ±0,015 mmVarnish type Nitro, red Nitro, green4- Initial charge Pb-azide, white5- Detonating charge 1 Tetryl6- Detonating charge 2 Tetryl SENSITIVITY:

Initiation Duplex rimer M P4p 24 for a distance of 40 mmTo be tested in Tool, bearing, steel Material action Penetration of Pb-boards of 3 mm thickness, min 5,0 mm

Packing

Number of pieces in a cardboard box 35 pcs in a boxN° of boxes in a cardboard box / no. of pcs box x 35 pcs / pcs 4 140Number of boxes in a package / no. of pcs 5 cardboard boxes x pcs140 pcs 700N° of packages in a wooden case / no. of pcs 8 packages x pcs 700 . 00 pcs 5 6

Ø7.55

7.6

Ø6.3

12.4

5

0-0

.3

7

93

6

Detonating primer KS-1C

12

4

5

8


Assignation: Reac.-cumul. Shell 82 mm



1- Cup Al 99,5 0,30 ±0,015 mm2- Anvil CuZn28 0,31 ±0,015 mm 3- Disc Al 99,5 0,25 ±0,015 mm4- Covering CuZn10 0,30 ±0,015 mmVarnish type Nitro, green 5- Initial charge 1 Non-corrosive, synoxide6- Initial charge 2 AT 70:30, azide-trizinate7- Brisant charge 1 Pentrite8- Brisant charge 2 Pentrite9- Brisant charge 3 Pentrite SENSITIVITY:Weight mass 300 gUpper sensitivity limit 500 mm, 90°, 600 mm, 30°Lower sensitivity limit 80 mm, 90°, 100 mm, 30°To be tested in Tool, bearing, steelMaterial action (Safety fuse + M7A) Pb board 4 mm, Ø>=6,3 mm

Packing

Number of pieces in a cardboard box 35 pcs in a boxN° of boxes in a cardboard box/no. of pcs 3 box x 35 pcs / 105 pcsNumber of boxes in a packag/no. of pcs 5 cardboard boxes x 105 pcs N° of packages in a wooden case/no. of pcs 8 pack. x 525 pcs/4.200 pcs

9.4

Ø4.88

Detonating primer DK-34

5

2

4

6

3

1





1- Cup Al Mn 1 0,32 ±0,02 mm2- Upper disc Al 99,5 0,25 ±0,01 mm 3- Lower disc Al 99,5 0,25 ±0,015 mmVarnish type Nitro, red Nitro, green4- Initial charge Pb-azide, white5- Detonating charge 1 Pentrite6- Detonating charge 2 Pentrite SENSITIVITY:Initiation Safety fuseInitiator Booster M7AP2To be tested in Tool, Pb blockMaterial action 1 (powder column + M17P4) Penetration of Pb-boards of 3 mm thickness, Ø>=6,12 mmMaterial action 2 (Safety fuse + M7AP2) Extension of Pb block, min 3,0 cm³

Packing


9.4

Ø4.88

Detonating primer IDK-34

6

2

4

7

3

1

5


Assignation: Fuze for Art. Shells



1- Cup Al Mn 1 0,32 ±0,02 mm2- Upper disc Al 99,5 0,05 ±0,015 mm 3- Lower disc Al 99,5 0,25 ±0,015 mmVarnish type Nitro, red Nitro, yellow4- Initial charge 1 Synoxide, non-corrosive 5- Initial charge 2 Pb-azide, white6- Brisant charge 1 Pentrite7- Brisant charge 2 Pentrite SENSITIVITY:Ball weight 52 gUpper sensitivity limit 80 mmLower sensitivity limit 5 mmFiring pin Ø3,0 mm; 2 30 , at the top 3° ´± Ø 0,2 -0,1

To be tested in Tool, bearing, steel Material action Penetration of Pb-boards of 3 mm thickness, Ø>=4,8 mm

Packing


9.4

Ø4.88

Detonating primer PDK-34

6

2

4

7

3

1

5


Assignation: Fuze for Art. Shells



1- Cup Al Mn 1 0,32 ±0,02 mm2- Upper disc Silk cloth 3- Lower disc Al 99,5 0,25 ±0,015 mmVarnish type Nitro, green4- Initial charge 1 Tricinate5- Initial charge 2 Pb-azide, white6- Brisant charge 1 Pentrite7- Brisant charge 2 Pentrite SENSITIVITY:Initiation Safety fuseInitiator Booster M7To be tested in Tool, Pb blockMaterial action 1 (powder column + PDK-34) Penetration of Pb-boards of 3 mm thickness, Ø>=4,8 mmMaterial action 2 (Safety fuse + ) PDK-34 Extension of Pb block, min 3,0 cm³

Packing

Number of pieces in a cardboard box 35 pcs in a boxN° of boxes in a cardboard box/no. of pcs 3 box x 35 pcs / 105 pcsNumber of boxes in a packag/no. of pcs 5 cardboard boxes x 105 pcs N° of packages in a wooden case/no. of pcs 8 pack. x 525 pcs 4.200 pcs

Detonating primer KL-35 (DK-8-Cu) Ø

6

45

19

Ø3

Max.

Ø7,2

1 2 3 4


Assignation: Fuze for HG M84



1- Cup Cu-DHP R240 or CuZn10 0,75 ±0,02 mm2- Upper disc Cu-DHP R240 or CuZn10 0,5 ±0,015 mm 3- Initial charge Hg fulminate4- Detonating charge Pentrite

SENSITIVITY:

Initiation Safety fuse To be tested in ToolMaterial action 1 Penetration of Pb board of 5,0 mm thickness, Ø>=7,2 mmMaterial action 2 Extension of Pb block, min 25 cm³

Packing

Number of pieces in a cardboard box 100 pcsNumber of cardboard boxes in a package/ no. of pieces 5 cardboard boxes x 100 pcs Number of packages in a wooden case / , no. of pieces 8 packages x 500 pcs/4.000 pcs

Detonating primer KL-35 P1 (DK-8-Cu P1) Ø

6

38,3

19

Ø3

Ø7,5

1 2 3 4


Assignation: Fuze for HG M75



1- Cup Cu-DHP R240 or CuZn10 0,75 ±0,02 mm2- Upper disc Cu-DHP R240 or CuZn10 0,5 ±0,015 mm 3- Initial charge Hg fulminate4- Detonating charge Pentrite

SENSITIVITY:

Initiation Safety fuse To be tested in ToolMaterial action 1 Penetration of Pb board of 5,0 mm thickness, Ø>=7,2 mmMaterial action 2 Extension of Pb block, min 25 cm³

Packing

Number of pieces in a cardboard box 100 pcsNumber of cardboard boxes in a package/ no. of pieces 5 cardboard boxes x 100 pcs Number of packages in a wooden case / , no. of pieces 8 packages x 500 pcs/4.000 pcs

M 7 M 7A M 7AP1

M 7AP2 V 5K DT-13

pp TK-130 pp TK-142 P12 P1 M 7 P1


BOOSTINGS, RELAY CHARGES

Ø5.4

2.9

Boosting M 7

2

3

1


Assignation: Artilery shells



1- Cup Al 99,5 0,25 ±0,015 mm2- Ring disc Al 99,5 ½ t 0,14 ±0,01 mm3- Charge Pb-azide, white

SENSITIVITY:

Ignition Flame of powder column, Safety fuse Material action Pb-board, of 1,65 mm thickness, penetration more than Ø5,4 mm To be tested in Tool, bearing

Packing


Ø5.4

2.9

Boosting M 7A

2

3

1


Assignation: - Air. rocket cumul. 57mm BR-1, BR-2 I BR-20; - Reac.-cumul. shells (RKZ) 82 mm; - Cumul. shell 80 mm for Hand launcher 44mm



1- Cup Al 99,5 0,25 ±0,015 mm2- Ring disc Al 99,5 ½ t 0,14 ±0,01 mmVarnish type Shellac, alcohol 4- Charge AT mixture 80:20 Pb-azide-trizinate

SENSITIVITY:


Packing


Boosting M 7A P1

Ø5.4

2.5

8

2

3

1

4





1- Cup Al 99,5 0,25 ±0,015 mm2- Ring disc Al 99,5 ½ t 0,14 ±0,01 mm3- Silk disc Silk cloth 4- Charge AT mixture 80:20 Pb-azide-trizinate

SENSITIVITY:


Packing


Boosting M 7A P2

Ø5.4

2.5

8

2

3

1

5

4





1- Cup Al 99,5 0,25 ±0,015 mm2- Ring disc Al 99,5 ½ t 0,14 ±0,01 mm3- Silk disc Silk cloth 4- Charge 1 Pb-azide5- Charge 2 Trizinate

SENSITIVITY:


Packing


7.0

Ø10.49

0-0

.5

Relay charge V 5K

2

3

1


Assignation: Air. Rocket-cumul. 57mm ( BR-2 i BR-20)



1- Cup HT-30, steel strip 0,32 ±0,02 mm2- Disc HT-30, steel strip 0,18 ±0,015 mm3- Charge PentriteVarnish type Shellac, alcohol, flanged

SENSITIVITY:

Pressing density 1,55-1,65 g/cm³, laboratory-measuredMaterial action In the fuze assembly (greater assembly)

Packing


Relay charge DT-13

1

2 8.6

5

Ø6.9

Ø5.05

0 -

0.2

5


Assignation: Artilery shells



1- Cup CuZn10 0,13 ±0,02 mm2- Charge Tetryl

SENSITIVITY:


Packing


Relay charge pp TK-130

1

2

Ø7.1

5

0-0

.25

Ø5.06


Assignation: Fuze UTU M93 for mortar shell



1- Cup CuZn10 0,15 ±0,02 mm2- Charge Tetryl

SENSITIVITY:


Packing

Number of pieces in a cardboard box 800 pcs Number of boxes in a package / no. of pcs 5 cardboard boxes x 800 pcs 4.000 pcsN° of packages in a wooden case / no. of pcs 8 packages x 4.000 pcs 32.000 pcs

Relay charge pp TK-142

1

2

Ø7.1

5

0-0

.25

Ø5.06


Assignation: Fuze UT M88 for mortar shell



1- Cup CuZn10 0,15 ±0,02 mm2- Charge Pentrite

SENSITIVITY:


Packing

Number of pieces in a cardboard box 800 pcs Number of boxes in a package / no. of pcs 5 cardboard boxes x 800 pcs 4.000 pcsN° of packages in a wooden case / no. of pcs 8 packages x 4.000 pcs 32.000 pcs

Boosting P12 P1

Ø3.88

3.7

5

2

3

1

4


Assignation: Fuze for Artilery shells



1- Cup Al 99,5 0,28 ±0,015 mm2- Ring disc Al 99,5 ½ t 0,14 ±0,01 mm3- Silk disc Silk cloth 4- Charge AT mixture 80:20 Pb-azide-trizinate

SENSITIVITY:


Packing


Ø5.4

2.5

8

Boosting M 7 P1

2

3

1


Assignation: Fuze for Artilery shells



1- Cup Al 99,5 0,25 ±0,015 mm2- Disc Al 99,5 ½ t 0,25 ±0,01 mmVarnish type Nitro, red 3- Charge Pb-azide, white

SENSITIVITY:


Packing


IDK-3

KL-34


DUPLEX TYPE

Ø 6

,3

M7x0

,7 le

vi

15,0

Duplex primer IDK-3

52 43 1


Assignation: Anti-aircraft bullet 20 mm (PAV 20mm)



1- Cup (cartridge case) Al Cu5PbBi.54 0,7 -0,05 mm2- Disc (cup) Al Mg2.10 0,6 ±0,02 mm Varnish type Nitro, red3- Initial charge 1 Non-corrosive, synoxide4- Initial charge 2 Pb-azide, white5- Brisant charge Pentrite SENSITIVITY:Ball weight 52 gUpper sensitivity limit 80 mmLower sensitivity limit 5 mmFiring pin Ø1,0 mm; sharply, with limited access To be tested in Tool, bearing, steel Material action 1 Penetration of Pb-boards of 4 mm thickness, Ø>=6,3 mmMaterial action 2 Extension of Pb block, min 8,0 cm³

Packing


Detonating primer KL-34

9.4

Ø4.88

5

3

6

4

2

1

7


Assignation: Fuzes UT M88 and UTU M93 for Mortar shells



1- Cup Al Mn 1 0,32 ±0,02 mm2- Upper disc Al 99,5 0,05 ±0,01 mm 3- Lower disc Al 99,5 0,25 ±0,015 mmVarnish type Nitro, red Nitro, green4- Initial charge 1 Synoxide, non-corrosive 5- Initial charge 2 Pb-azide, white6- Brisant charge 1 Tetryl7- Brisant charge 2 Tetryl SENSITIVITY:Ball weight 52 gUpper sensitivity limit 80 mmLower sensitivity limit 5 mmFiring pin Ø4,2 mm; 26 30 , ±0,05, R 0,1° ´± Ø 0,38

To be tested in Tool, bearing, steel Material action Penetration of Pb-boards of 3 mm thickness, Ø>=4,8 mm

Packing


UD M76 P1 VUD M76 P1

UD-E97 VUD-E97


DETONATORS FOR HAND GRENADE

Impact detonator M76 P1 (UD M76 P1)

68

27

Ø9

M10

x0.7

5-6g

Ø7.2

15 34 2


Assignation: Hand grenade (HG) M75



1- Initial primer E-96, boxer, synoxide Ø5,38 x 3,22- Delay element body CuZn 39 Pb2.43 Ø12,0 3- Igniting mixture Zr - Pb minium4- Delay mixture Based on Zr (4 layers)5- Detonating primer KL-35 P1, Ø7,3 max x 38,3 fulminate, pentrite SENSITIVITY:

Initiation E-96Delay time (21 ±2°C) 3,5 ±0,5 secTo be tested in Tool, bearing, steelMaterial action Penetration of Pb board of 5 mm thickness, Ø>=7,3 mm

Packing

Number of pieces in a cardboard box 24 pcs in a boxNumber of boxes in a cardboard box / no. of pcs 1 box x 24 pcs / 24 pcsNumber of boxes in a package / no. of pcs 5 cardboard boxes x 24 pcs/ 120 pcsNumber of packages in a wooden case / no. of pcs 10 packages x 120 pcs/ 1.200 pcs

68

27

Ø9

M10x0

.75-6

g

Ø9

Practice impact detonator M76 P1 (VUD M76 P1)

15 34 276


Assignation: Practice HG M75



1- Initial primer E-96, boxer, synoxide Ø5,38 x 3,22- Delay element body CuZn 39 Pb2.43 Ø12,0 3- Igniting mixture Zr - Pb minium4- Delay mixture Based on Zr (4 layers)5- Carboard tube Natron paper Ø9,0 ±0,05 x 45,06- Disc Pressboard card 0,43 mm7- Burst mixture K perchlorate - Al powder SENSITIVITY:

Initiation E-96Delay time (21 ±2°C) 3,5 ±0,5 secTo be tested in Tool, bearing, steel

Packing


Impact detonator E-97 (UD E-97)

Packing


70.5

Ø12

M10

x1-6

g

45.2 23.3

Ø8.6

Max.

Ø7.3

15 34 2678


Assignation: Hand grenade (HG) M84



1- Initial primer E-96, boxer, synoxide Ø5,38 x 3,22- Delay element body CuZn 39 Pb2.43 Ø12,0 3- Igniting mixture 1 Zr - Pb minium4- Delay mixture Based on Zr (4 layers)5- Igniting mixture 2 Zr - Pb minium6- Safety disc SnSb2, strip 0,42 +0,027- Ring disc Cu DHP R290 0,62 ±0,028- Detonating primer KL-35 P1, Ø7,3 max x 38,3 fulminate, pentrite SENSITIVITY:Initiation E-96Delay time (21 ±2°C) 4,0 ±0,5 secTo be tested in Tool, bearing, steelMaterial action Penetration of Pb board of 5 mm thickness, Ø>=7,3 mm

Practice impact detonator E-97 (VUD E-97)

70.5

Ø12

M1

0x1

-6g

45.2 23.3

Ø8.6

Ø9,5

15 34 2678109


Assignation: Practice hand grenade (PHG) M84



1- Initial primer E-96, boxer, synoxide Ø5,38 x 3,2 2- Delay element body CuZn 39 Pb2.43 Ø12,0 3- Igniting mixture 1 Zr - Pb minium 4- Delay mixture Based on Zr (4 layers) 5- Igniting mixture 2 Zr - Pb minium 6- Safety disc SnSb2, strip 0,42 +0,02

7- Ring disc Cu DHP R290 0,62 ±0,02

8- Carboard tube Natron paper Ø9,0 ±0,05 x 45,0 9- Disc Pressboard card 0,43 mm10- Burst mixture K perchlorate - Al powder SENSITIVITY:Initiation E-96Delay time (21 ±2°C) 4,0 ±0,5 secTo be tested in Tool, bearing, steel

Packing


QUALITY

„KRUŠIK" has been awarded two certificates for the Qualit Managment System: SRPS ISO 9001:2008; ISO 9001:2008; SORS 9000/05; ISO 14001:2004; OHSAS 18001:2007 i SRPS ISO/IEC 17025:2005.


Documents

FACTORY FOR PRODUCTION OF INITIAL DEVICES AND … · FACTORY FOR PRODUCTION OF INITIAL DEVICES AND ELECTRIC DETONATORS. ... (for shooting ammunition and special type of ammo ... and