-- ~ \V

CERTIFICATE No. Z10 084071 0023 Rev. 00

Holder of Certificate: Texas Instruments Incorporated 13905 University Blvd.

Certification Mark:

Product:

Sugar Land TX 77479 USA

Safety components Safety MCUs

Product Service

The product was tested on a voluntary basis and complies with the essential requirements. The certification mark shown above can be affixed on the product. It is not permitted to alter the certification mark in any way. In addition the certification holder must not transfer the certificate to third parties. See also notes overleaf.

Test report no.:

Valid until:

Date, 2020-09-21

Page 1 of 2

TS95564C

2025-09-20

~cfl---Guido Neumann )

TOV SOD Product Service GmbH • Certification Body • Ridlerstraf!.e 65 • 80339 Munich • Germany TUV®

r--0

CERTIFICATE No. Z10 084071 0023 Rev. 00

Parameters:

Tested according to:

Factory(ies):

Model(s):

TMS320F28004x

F280048CPMQR

F280048PMQR

F280049CPMS

F280049CPZQR

F280049CPZS

F280049PMS

F280049PMSR

F280049PZQR

F280049PZQ

F280049PZS

F280049PZSR

Page 2 of 2

Hardware Integrity up to ASIL B Systematic Capability ASIL D Systematic Capability SIL 3

ISO 26262-2:2018 ISO 26262-5:2018 ISO 26262-6:2018 ISO 26262-7:2018 ISO 26262-8:2018 ISO 26262-9:2018 IEC 61508-1 :2010 IEC 61508-2:2010 IEC 61508-3:2010

089040

TMS320F28004x

TOV SOD Product Service GmbH • Certification Body • Ridlerstrar..e 65 • 80339 Munich • Germany

~ \V Product Service

1UV®

Zertifiziervertrag Grundlage für die Zertifikatserteilung ist die Prüf­und Zertifizierordnung von TÜV SÜD Product Service. Mit Erhalt des Zertifikates erkennt der Zertifikatsinhaber die jeweils gültige Fassung der Prüf- und Zertifizierordnung an (www.tuev­sued.de/ps_regulations) und wird somit Partner im Zertifiziersystem von TÜV SÜD Product Service.

Certification contract Certification is based on the TÜV SÜD Product Service Testing and Certification Regulations. On receipt of the certificate the certificate holder agrees to the current version of the Testing and Certification Regulations (www.tuv­sud.com/ps_regulations) and thus becomes partner in the TÜV SÜD Product Service Certification System.

iAidI��

i)d.iI�T TÜV SÜD F��IH�' O!�i.itRiAi..iI;tJi!lJ� 0

U�ill�W��ill����.��n�*�(.i.itR

iA i..iIltJi!IJ � (m www.tuv-sud.com/ps_regulations )

ttPX,Pl TÜV SÜD F aUIB�·iAi.iE*;jtpg �.g-�{x1'#o

�äiEJl!�

��� TÜV SÜD Product Service O)tt���m*�L: - " < ����a*�����g� � 1-t. '- � � -:J 0 Ale.., RlL t:=I -171' 1't 1=1 k:t'- r:ile, RlL t:=I #"<!. � 'PR '1 #'0) '- h .... a-..

�) :üH�ffO)tt���iEm*�(www.tuv­

sud.com/ps_regulations)L: �� L- tc.. t. 0) t. "9.Q 0

-=t"0)#.E�, TÜV SÜD Product Service ���ATb.

0)/,- "T-t.t�.Qo

Contrato de certifica�äo A certificagäo se baseia nos Regulamentos de Testes e Certificagäo do Grupo TÜV SÜD. Ao receber 0 certificado, 0 Fornecedor, titular do certificado concorda com a versäo atual dos Regulamentos de Testes e Certificagäo do Grupo TÜV SÜD (www.tuv-sud.com/ps_regulations) e assim, torna-se parceiro no Sistema de Certificagäo de Produtos e Servigos TÜV SÜD.

Prinzipielle Voraussetzung für die Gültigkeit des Zertifikates: • Gültigkeit der zitierten normativen

Prüfgrundlage(n) ist gegeben und zusätzlich bei Zertifikaten mit Berechtigung zur Verwendung eines Prüfzeichens bzw. bei Zertifikaten für OM-Systeme: • Voraussetzungen für vorschriftsmäßige

Fertigung werden eingehalten. • Die Fertigungs- bzw. Betriebsstätten werden

regelmäßig überwacht.

Requirernents for the validity of the certificate in principle: • Validity of the quoted test standard(s) In addition, for certificates with the right to use a certification mark and for OM certificates: • Conditions for an adequate manufacturing are

maintained • Regular surveillance of the facility is performed

tt �idI ·:IHi � 11 a1J Jjj{91IJ .: 5j( :

• iA i.iEPJT�:Im*�;t��J�tt

��,�Tm���m�ill�*�ill��ma ••

1**i.iE� :

• {�H�ft:7.J'��F�{�

• �F!.� ±&JffiJjJE!ffl � � ff

�äiE.O)��11L:�T.QJjj{�a1J�,:5j(.�

• �I m L-"t�,.Q tt�m�t(�xjr'(' (17j.Q

�6L:���-�0)�m��.�h���.��

&'i-:7 - ::;" '" L �j§;r�I+ . � "' .:::r-. ':/ /" ./ I ' we" R.LL "'" k:t- •

• JMWt���0)�1��m�L-"t �'.Q

• JE!ffl�t�I:t��1!t���L-"t�,.Q

Requisitos para a validade do certificado (ern principio): • Validade da(s) norma(s) de ensaio(s)

referenciada( s). Adicionalmente, para os certificados com 0 direito ao uso da marca de certificagäo e para certificados de SG: • Condigöes de fabricagäo adequada estäo

mantidas. • Auditoria de monitoragäo realizada

regularmente.

IMPORTANT NOTICE AND DISCLAIMERTI PROVIDES TECHNICAL AND RELIABILITY DATA (INCLUDING DATASHEETS), DESIGN RESOURCES (INCLUDING REFERENCEDESIGNS), APPLICATION OR OTHER DESIGN ADVICE, WEB TOOLS, SAFETY INFORMATION, AND OTHER RESOURCES “AS IS”AND WITH ALL FAULTS, AND DISCLAIMS ALL WARRANTIES, EXPRESS AND IMPLIED, INCLUDING WITHOUT LIMITATION ANYIMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NON-INFRINGEMENT OF THIRDPARTY INTELLECTUAL PROPERTY RIGHTS.These resources are intended for skilled developers designing with TI products. You are solely responsible for (1) selecting the appropriateTI products for your application, (2) designing, validating and testing your application, and (3) ensuring your application meets applicablestandards, and any other safety, security, or other requirements. These resources are subject to change without notice. TI grants youpermission to use these resources only for development of an application that uses the TI products described in the resource. Otherreproduction and display of these resources is prohibited. No license is granted to any other TI intellectual property right or to any third partyintellectual property right. TI disclaims responsibility for, and you will fully indemnify TI and its representatives against, any claims, damages,costs, losses, and liabilities arising out of your use of these resources.TI’s products are provided subject to TI’s Terms of Sale (https:www.ti.com/legal/termsofsale.html) or other applicable terms available eitheron ti.com or provided in conjunction with such TI products. TI’s provision of these resources does not expand or otherwise alter TI’sapplicable warranties or warranty disclaimers for TI products.IMPORTANT NOTICE

Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265Copyright © 2021, Texas Instruments Incorporated