F05 METALLIC FOOD PROCESSING PUMP TECHNICAL DATA …

S A N D P I P E R P U M P . C O M

Warren Rupp, Inc. • A Unit of IDEX Corporation800 N. Main St., Mansfield, Ohio 44902 USA Telephone 419.524.8388 • Fax 419.522.7867

5 YEAR LIMITED PRODUCT WARRANTY 5 Year Guarantee for defects in material or workmanship. See sandpiperpump.com/content/warranty-certifications for complete warranty, including terms and conditions, limitations and exclusions.

F E AT U R E

EXCLUSIVE

USE ONLY GENUINE SANDPIPER PARTS All certification, standards, guarantees & warranties originally supplied with this pump will be invalidated by the use of service parts not identified as “Genuine SANDPIPER Parts.”

SUCTION / DISCHARGE PORT SIZE• 1 1/2” Sanitary Clamp

CAPACITY• 0 to 12 gallons per minute (0 to 45.4 LPM)

AIR DISTRIBUTION VALVE• No-lube, no-stall design

SOLIDS-HANDLING• Up to .0625 (1.6mm)

F05 METALLIC FOOD PROCESSING PUMP TECHNICAL DATA SHEET

PERFORMANCE

ISO 9001 Certified ISO 14001 Certified

FDA COMPLIANT PUMPSFor a variety of food processing, pharmaceutical and cosmetic industry applications

SERIES

HEADS UP TO• 100 psi or 231 ft. of water

(7 bar or 70 meters)MAXIMUM OPERATING PRESSURE

• 100 psi (7 bar)DISPLACEMENT/STROKE

• .02 Gallon / .08 literWEIGHTS

• Stainless Steel 17 lbs. (7.7kg)

Meters Feet

Disc

harg

e Hea

d in

PSI

2 106

0

100

90 80 70 60 50 40 30 20 10

0

240 220 200 180 160 140 120 100

80 60 40 20

0

75 70 65 60 55 50 45 40 35 30 25 20 15 10

5 0

1284

40

0

5 10 15 20 25 30 35 45 50Capacity in Liters Per Minute

Capacity in U.S. Gallons Per Minute

Displacement Per Stroke, 0.022 Gal. (0.08 L)

48

12

2 AIR CONSUMPTION IN SCFMAIR PRESSURE IN PSI

SCFM M3/HR 2 3.4 4 6.8 8 13.6 12 20.4

0

1

2

3

4

5

6

7

BAR

Disc

harg

e Hea

d in

PSI

2 106

0

100

90 80 70 60 50 40 30 20 10

0 Meters Feet

240 220 200 180 160 140 120 100

80 60 40 20

0

75 70 65 60 55 50 45 40 35 30 25 20 15 10

5 0 0

1

2

3

4

5

6

7

BAR 1284

40

0

5 10 15 20 25 30 35 45 50Capacity in Liters Per Minute

Capacity in U.S. Gallons Per Minute

Displacement Per Stroke, 0.019 Gal. (0.07 L)

48

12

2 AIR CONSUMPTION IN SCFMAIR PRESSURE IN PSI

SCFM M3/HR 2 3.4 4 6.8 8 13.6 12 20.4



DIMENSIONS

Food Processing Metallic Dimensions in inches (mm dimensions in brackets). The dimensions on this drawing are for reference only. A certified drawing can be requested if physical dimensions are needed.

.9824.96

7.45189.13

9.42239.27

1-1/2”SANITARY CLAMPSUCTION PORT

1-1/2”SANITARY CLAMPDISCHARGE PORT3/8"

AIR INLET

.256.35

2.3860.45

5.07128.75

8.19208.13

6.03153.26

10.41264.41

.7218.26

RUBBER FOOT

.7218.26

RUBBER FOOT

4.49113.92

8.20208.33

3.1580.07

4.34110.24

5.67144.08

1.1930.16

RUBBER FOOT3/8" NPT

AIR EXHAUST



F XX X X X X X X X X X XXModel #:

F __ ____ __ __ __ __ __ __ __ __ __ ____(fill in from pump nameplate)

Your Model #:

Pump Pump Check Design Wetted Diaphragm/ CheckValve Non-Wetted Porting Pump Muffler Pump Config. Size Valve Level Material CheckValve Seat Material Options Style Options Options

Material Profile: Operating Temperatures:

Max. Min.

CONDUCTIVEACETAL: Tough, impact resistant, ductile. Good abrasion resistance and low friction surface. Generally inert, with good chemical resistance except for strong acids and oxidizing agents.

190°F88°C

-20°F-29°C

EPDM: Shows very good water and chemical resistance. Has poor resistance to oils and solvents, but is fair in ketones and alcohols.

280°F138°C

-40°F-40°C

FKM(FLUOROCARBON): Shows good resistance to a wide range of oils and solvents; especially all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. Hot water or hot aqueous solutions (over 70°F(21°C)) will attack FKM.

350°F177°C

-40°F-40°C

HYTREL®: Good on acids, bases, amines and glycols at room temperatures only.

220°F104°C

-20°F-29°C

NEOPRENE: All purpose. Resistance to vegetable oils. Gener-ally not affected by moderate chemicals, fats, greases and many oils and solvents. Generally attacked by strong oxidizing acids, ketones, esters and nitro hydrocarbons and chlorinated aromatic hydrocarbons.

200°F93°C

-10°F-23°C

NITRILE: General purpose, oil-resistant. Shows good solvent, oil, water and hydraulic fluid resistance. Should not be used with highly polar solvents like acetone and MEK, ozone, chlorinated hydrocarbons and nitro hydrocarbons.

190°F88°C

-10°F-23°C

NYLON: 6/6 High strength and toughness over a wide tem-perature range. Moderate to good resistance to fuels, oils and chemicals.

180°F82°C

32°F0°C

POLYPROPYLENE: A thermoplastic polymer. Moderate tensile and flex strength. Resists stong acids and alkali. Attacked by chlorine, fuming nitric acid and other strong oxidizing agents.

180°F82°C

32°F0°C

PVDF: (Polyvinylidene Fluoride) A durable fluoroplastic with excellent chemical resistance. Excellent for UV applications. High tensile strength and impact resistance.

250°F121°C

0°F-18°C

SANTOPRENE®: Injection molded thermoplastic elastomer with no fabric layer. Long mechanical flex life. Excellent abrasion resistance.

275°F135°C

-40°F-40°C

UHMWPE: A thermoplastic that is highly resistant to a broad range of chemicals. Exhibits outstanding abrasion and impact resistance, along with environmental stress-cracking resistance.

180°F82°C

-35°F-37°C

URETHANE: Shows good resistance to abrasives. Has poor resistance to most solvents and oils.

150°F66°C

32°F0°C

VIRGINPTFE: (PFA/TFE) Chemically inert, virtually impervious. Very few chemicals are known to chemically react with PTFE; molten alkali metals, turbulent liquid or gaseous fluorine and a few fluoro-chemicals such as chlorine trifluoride or oxygen difluoride which readily liberate free fluorine at elevated temperatures.

220°F104°C

-35°F-37°C

Maximum and Minimum Temperatures are the limits for which these materials can be operated. Temperatures coupled with pressure affect the longevity of diaphragm pump components. Maximum life should not be expected at the extreme limits of the temperature ranges.

Metals:ALLOYC: Equal to ASTM494 CW-12M-1 specification for nickel and nickel alloy.

STAINLESSSTEEL: Equal to or exceeding ASTM specification A743 CF-8M for corro-sion resistant iron chromium, iron chromium nickel and nickel based alloy castings for general applications. Commonly referred to as 316 Stainless Steel in the pump industry.

For specific applications, always consult the Chemical Resistance Chart.

CAUTION!Operatingtemperaturelimitationsareasfollows:

EXPLANATION OF PUMP NOMENCLATURE

PUMP BRAND F Food Processing

PUMP SIZE 05 1/2"

CHECK VALVE TYPE B Ball

DESIGN LEVEL 1 Design Level

WETTED MATERIAL S Stainless Steel

MATERIALS

DIAPHRAGM/CHECK VALVE MATERIALS D FDA Santoprene / PTFE G PTFE-Neoprene/PTFE H Hytrel/Hytrel Z One-Piece Bonded/PTFE

CHECK VALVE SEAT S Stainless Steel

NON-WETTED MATERIAL OPTIONS P Polypropylene

PORTING OPTIONS T 1 1/2” Sanitary Clamp

NOTE: See service manual for ATEX details.

SP_DS_TemplateDataSheet_0817

PUMP STYLE F Food

MUFFLER OPTIONS 0 Plastic Threaded Muffler

PUMP OPTIONS 0 None

II 2G EEx m c T5II 2D c IP65 T100°C

Documents

F05 METALLIC FOOD PROCESSING PUMP TECHNICAL DATA …