Embed Size (px)
Citation preview
1.5F [email protected]
07.2014
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
TORQUE
Kv-VALUES
Subject to change without notice
- The torque values specified (Md) are based on liquid and lubricant media
- Powdery (non-lubricant) media Md x 1,3
- Dry gases/high viscous media Md x 1,2
- The values specified are based on the initial breakaway torque
- Dynamic torque specification available upon request
Regarding the dimensioning of actuators, please contact our engineers.
- The Kv-value [US Gallon per minute] is the flow of water at a temperature of 41°F to 86°F at ∆p of 15 ps
- The Kv-values specified are based on tests carried out by the Delfter Hydraulics Laboratories, the Netherlands
- Permissible velocity of flow Vmax 4,5 m/s for liquids, Vmax 70 m/s for gases
- The throttle function is linear at an angle 30° to 70°
- Avoid cavitation
For further values, please contact our engineers.
Opening angle α°DN
[mm]Size[in] 20° 30° 40° 50° 60° 70° 80° 90°
150 6 154 396 881 1585 2818 3963 5944 9246200 8 189 793 1541 2554 4403 7045 13209 17611250 10 550 1585 2906 4843 7925 13649 23335 28178300 12 881 2422 4403 7045 11447 22014 33022 37424350 14 1541 3434 6164 10567 17611 35223 47551 50633400 16 2157 4623 7925 13649 24216 48432 52834 63842450 18 2245 4755 8982 14750 26857 50633 64282 90259500 20 2289 4843 9686 15410 27298 52834 66483 92460600 24 3302 6164 12328 22455 38745 61640 96863 129004700 28 3390 7727 14353 26329 46670 75289 111393 158503800 32 5283 9950 20033 36236 56797 89378 129004 196368900 36 6780 10039 26549 46230 77490 128564 185581 2597691000 40 9686 17479 36544 63754 105669 163346 265493 3588341200 48 22234 34783 60760 86736 147496 234673 321629 451954
Operating pressureDN
[mm]Size[in] 50 psi
100 psi 150 psi
200 psi
150 6 366 458 714 954200 8 600 773 1282 1526250 10 1526 1831 1831 1831300 12 2034 2441 2563 2746350 14 3560 5492 5584 5340400 16 4272 6306 6865 6484450 18 7323 7587 7872 11442500 20 9154 11188 20642 28148600 24 10679 21359 27461 44472700 28 15866 22783 31580 61788800 32 21054 38649 60414 85435900 36 27461 49837 64991 110607
1000 40 46786 68958 105268 1861251200 48 79332 122049 192228 335636
TECHNICAL DATANominal diameter: DN 150 - DN 2000
bigger sizes upon request
Face-to-face: EN 558 Series 20ISO 5752 Series 20API 609 Table 1
Flange accommodation: EN 1092 PN 6/10/16/25ASME Class 150/300AS 4087 PN16/21
Flange Surface Design: EN 1092 Form A/BASME RF, FF
Top flange: EN ISO 5211
Marking: EN 19
Tightness check: EN 12266 (Leakage rate A) ISO 5208, Category 3
Temperature range: -40°F to +392°F (depending on pressure, medium and material)
Operating pressure: max. 200 psi
Double flanged butterfly valve with short construction length to be used in heavy duty applications.
FEATURES- Absolutely tight sealing with flow in either direction
- The valve body and disc are accurately machined which results in low operating torque and long service life and reliability
- Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operating service
- Can be disassembled, material-specific recycling possible
- Single flange mounting is possible
- Can be installed in any desired position
- Maintenance-free
- Fully repairable valve
GENERAL APPLICATIONS- Offshore
- Water and waste water technology
- Shipbuilding
- Power plants
Bigger sizes upon request All values in Inch Lbs
01-05_F012-K1_2014_USA.indd 2 11.08.2014 11:16:40
Ø F
Ø Di
C
AB
Ø D Z
E
F012-K1_2010.indd 1 23.07.2010 12:12:48
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
MATERIAL SPECIFICATION AND PARTS LIST
Subject to change without notice
Subject to change without notice
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
F012-K1 with free shaft end acc. to EN ISO 5211 TS-version Version with splitted shaft
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM1 Body 9/10 Shafts
Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 F2 Seal X5CrNiMo17-12-2 1.4401 316
NBR Acrylonitrile butadiene rubber Hastelloy 2.4883 HastelloyEPDM Ethylene propylene caoutchouc Bronze CuAlNiBZ 2.0975CSM Chlorsulphonated polyethylene 11 O-ringFPM Fluorocarbon caoutchouc NBR Acrylonitrile butadiene rubberVSI Silicon rubber FPM Fluorocarbon caoutchouc
3/4 Bearing sleeve 12 TS-discBronze RG 5 Nodular Cast Iron GGG-40 0.7040 60-40-18Polyamide Stainless Steel G-X5CrNiMo19-11-2 1.4408 A351CF8MPTFE Aluminium Bronze CuAl10Ni 2.0975 C 95800
5 Cover plate Coating Halar, RilsanGrey Cast Iron GG 25 0.6025 40 B Surface qualtiy electropolished, mirror finished
6 O-ring 13 TS-shaftNBR Acrylonitrile butadiene rubber Stainless Steel X14CrMoS17 1.4104 430 FFPM Fluorocarbon caoutchouc X39CrMo17-1 1.4122
7 Set screw DIN 915 X5CrNiMo17-12-2 1.4401 316Steel 45 H galvanized Bronze CuAlNiBZ 2.0975Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve
8 Disc Stainless Steel X5CrNi18-10 1.4301 304Steel St52.3 1.0570 572-50 15 O-ringStainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber
G-X5CrNiMo19-11-2 1.4408 A 351 CF8M 16 Shaft retainerX2CrNiMo17-12-2 1.4404 316 I Bronze RG 5 B 45X2CrNiMoTi17-12-2 1.4571 316 TI 17 Cover plateX2CrNiMoN22-5-3 1.4462 F 51 Grey Cast Iron GG 25 0.6025 40 BHastelloy 2.4883 Hastelloy 18 Screw
Aluminium bronze CuAl10Ni 2.0975 C 95800 Steel 45 H galvanizedCoating Halar, Rilsan Stainless Steel A2-70 B 8Surface quality electropolished, mirror finished A4-70 B8M
Other materials upon request
Dimensions [in] Weight [lb]GGG 40
DN[mm]
Size[in] A B C D Di E F Flange Z Splitted
shaftTS-
shaft150 6 7.99 5.91 13.90 12.01 5.83 2.20 3.54 F07 5.47 48.50 50.70200 8 8.98 6.93 15.91 13.78 7.83 2.36 3.54 F07 7.48 70.50 75.00250 10 10.47 8.35 18.82 16.93 9.76 2.68 4.92 F10 9.45 103.60 110.20300 12 11.46 9.33 20.79 18.90 11.65 3.07 4.92 F10 11.30 152.10 158.70350 14 13.07 10.59 23.66 21.26 13.31 3.62 5.91 F12 12.99 176.40 189.60400 16 14.29 12.36 26.65 23.82 15.28 4.02 5.91 F12 14.88 264.60 282.20450 18 15.63 13.19 28.82 26.57 16.93 4.49 8.27 F16 16.42 317.50 330.70500 20 17.20 15.94 33.15 27.95 19.47 5.00 8.27 F14/F16 18.66 359.30 374.80600 24 19.61 18.46 38.07 32.68 23.23 6.06 11.81 F16/F25 22.17 513.70 573.20700 28 22.87 19.96 42.83 35.63 26.77 6.50 11.81 F16/F25 25.98 643.70 760.60750 30 23.23 21.65 44.88 39.37 28.66 7.48 11.73 F25 27.68 - 1036.20800 32 24.80 21.89 46.69 40.16 30.71 7.48 11.81 F25 29.80 983.30 1027.30850 34 25.24 23.23 47.28 39.57 40.59 10.00 11.73 F25 31.77 - 1322.80900 36 27.40 24.29 51.69 44.09 34.65 7.99 11.81 F25 33.86 1252.20 1344.801000 40 30.35 26.57 56.93 49.21 38.58 8.50 13.78 F30 37.64 1375.70 1591.701050 42 32.17 28.54 60.71 52.99 40.59 10.00 13.78 F30 39.29 - 2248.701100 44 33.07 29.72 62.80 55.31 42.44 10.00 13.78 F30 41.18 - 2601.401200 48 35.63 31.89 67.52 58.27 46.06 10.00 13.78 F35 45.43 - 2160.501300 52 38.19 35.83 74.02 64.17 50.20 11.02 16.34 F35 48.98 - 3542.801350 54 39.37 35.63 75.00 66.34 52.76 11.02 16.34 F35 51.57 - 3880.101400 56 40.35 37.99 78.35 66.34 54.13 11.02 16.34 F35 52.99 - 3981.51500 60 43.9 41.73 85.63 73.03 57.95 11.02 18.7 F40 56.85 - 4872.21600 64 43.9 42.91 86.81 72.05 61.81 11.02 18.7 F40 60.83 - 5092.61650 66 48.23 45.28 93.5 80.12 64.8 11.02 18.7 F40 63.86 5643.81800 72 51.97 47.05 99.02 83.86 69.65 11.02 18.7 F40 68.78 6922.42000 78 55.12 51.57 106.69 89.17 77.24 20.67 20.67 F48 74.41 - 9096.2
01-05_F012-K1_2014_USA.indd 1 11.08.2014 11:16:32
Ø F
Ø Di
C
AB
Ø D Z
E
F012-K1_2010.indd 1 23.07.2010 12:12:48
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
MATERIAL SPECIFICATION AND PARTS LIST
Subject to change without notice
Subject to change without notice
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
F012-K1 with free shaft end acc. to EN ISO 5211 TS-version Version with splitted shaft
Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM1 Body 9/10 Shafts
Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 F2 Seal X5CrNiMo17-12-2 1.4401 316
NBR Acrylonitrile butadiene rubber Hastelloy 2.4883 HastelloyEPDM Ethylene propylene caoutchouc Bronze CuAlNiBZ 2.0975CSM Chlorsulphonated polyethylene 11 O-ringFPM Fluorocarbon caoutchouc NBR Acrylonitrile butadiene rubberVSI Silicon rubber FPM Fluorocarbon caoutchouc
3/4 Bearing sleeve 12 TS-discBronze RG 5 Nodular Cast Iron GGG-40 0.7040 60-40-18Polyamide Stainless Steel G-X5CrNiMo19-11-2 1.4408 A351CF8MPTFE Aluminium Bronze CuAl10Ni 2.0975 C 95800
5 Cover plate Coating Halar, RilsanGrey Cast Iron GG 25 0.6025 40 B Surface qualtiy electropolished, mirror finished
6 O-ring 13 TS-shaftNBR Acrylonitrile butadiene rubber Stainless Steel X14CrMoS17 1.4104 430 FFPM Fluorocarbon caoutchouc X39CrMo17-1 1.4122
7 Set screw DIN 915 X5CrNiMo17-12-2 1.4401 316Steel 45 H galvanized Bronze CuAlNiBZ 2.0975Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve
8 Disc Stainless Steel X5CrNi18-10 1.4301 304Steel St52.3 1.0570 572-50 15 O-ringStainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber
G-X5CrNiMo19-11-2 1.4408 A 351 CF8M 16 Shaft retainerX2CrNiMo17-12-2 1.4404 316 I Bronze RG 5 B 45X2CrNiMoTi17-12-2 1.4571 316 TI 17 Cover plateX2CrNiMoN22-5-3 1.4462 F 51 Grey Cast Iron GG 25 0.6025 40 BHastelloy 2.4883 Hastelloy 18 Screw
Aluminium bronze CuAl10Ni 2.0975 C 95800 Steel 45 H galvanizedCoating Halar, Rilsan Stainless Steel A2-70 B 8Surface quality electropolished, mirror finished A4-70 B8M
Other materials upon request
Dimensions [in] Weight [lb]GGG 40
DN[mm]
Size[in] A B C D Di E F Flange Z Splitted
shaftTS-
shaft150 6 7.99 5.91 13.90 12.01 5.83 2.20 3.54 F07 5.47 48.50 50.70200 8 8.98 6.93 15.91 13.78 7.83 2.36 3.54 F07 7.48 70.50 75.00250 10 10.47 8.35 18.82 16.93 9.76 2.68 4.92 F10 9.45 103.60 110.20300 12 11.46 9.33 20.79 18.90 11.65 3.07 4.92 F10 11.30 152.10 158.70350 14 13.07 10.59 23.66 21.26 13.31 3.62 5.91 F12 12.99 176.40 189.60400 16 14.29 12.36 26.65 23.82 15.28 4.02 5.91 F12 14.88 264.60 282.20450 18 15.63 13.19 28.82 26.57 16.93 4.49 8.27 F16 16.42 317.50 330.70500 20 17.20 15.94 33.15 27.95 19.47 5.00 8.27 F14/F16 18.66 359.30 374.80600 24 19.61 18.46 38.07 32.68 23.23 6.06 11.81 F16/F25 22.17 513.70 573.20700 28 22.87 19.96 42.83 35.63 26.77 6.50 11.81 F16/F25 25.98 643.70 760.60750 30 23.23 21.65 44.88 39.37 28.66 7.48 11.73 F25 27.68 - 1036.20800 32 24.80 21.89 46.69 40.16 30.71 7.48 11.81 F25 29.80 983.30 1027.30850 34 25.24 23.23 47.28 39.57 40.59 10.00 11.73 F25 31.77 - 1322.80900 36 27.40 24.29 51.69 44.09 34.65 7.99 11.81 F25 33.86 1252.20 1344.80
1000 40 30.35 26.57 56.93 49.21 38.58 8.50 13.78 F30 37.64 1375.70 1591.701050 42 32.17 28.54 60.71 52.99 40.59 10.00 13.78 F30 39.29 - 2248.701100 44 33.07 29.72 62.80 55.31 42.44 10.00 13.78 F30 41.18 - 2601.401200 48 35.63 31.89 67.52 58.27 46.06 10.00 13.78 F35 45.43 - 2160.501300 52 38.19 35.83 74.02 64.17 50.20 11.02 16.34 F35 48.98 - 3542.801350 54 39.37 35.63 75.00 66.34 52.76 11.02 16.34 F35 51.57 - 3880.101400 56 40.35 37.99 78.35 66.34 54.13 11.02 16.34 F35 52.99 - 3981.51500 60 43.9 41.73 85.63 73.03 57.95 11.02 18.7 F40 56.85 - 4872.21600 64 43.9 42.91 86.81 72.05 61.81 11.02 18.7 F40 60.83 - 5092.61650 66 48.23 45.28 93.5 80.12 64.8 11.02 18.7 F40 63.86 5643.81800 72 51.97 47.05 99.02 83.86 69.65 11.02 18.7 F40 68.78 6922.42000 78 55.12 51.57 106.69 89.17 77.24 20.67 20.67 F48 74.41 - 9096.2
01-05_F012-K1_2014_USA.indd 1 11.08.2014 11:16:32
1.5F [email protected]
07.2014
DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBLE FLANGED BUTTERFLY VALVE F 012-K1
TORQUE
Kv-VALUES
Subject to change without notice
- The torque values specified (Md) are based on liquid and lubricant media
- Powdery (non-lubricant) media Md x 1,3
- Dry gases/high viscous media Md x 1,2
- The values specified are based on the initial breakaway torque
- Dynamic torque specification available upon request
Regarding the dimensioning of actuators, please contact our engineers.
- The Kv-value [US Gallon per minute] is the flow of water at a temperature of 41°F to 86°F at ∆p of 15 ps
- The Kv-values specified are based on tests carried out by the Delfter Hydraulics Laboratories, the Netherlands
- Permissible velocity of flow Vmax 4,5 m/s for liquids, Vmax 70 m/s for gases
- The throttle function is linear at an angle 30° to 70°
- Avoid cavitation
For further values, please contact our engineers.
Opening angle α°DN
[mm]Size[in] 20° 30° 40° 50° 60° 70° 80° 90°
150 6 154 396 881 1585 2818 3963 5944 9246200 8 189 793 1541 2554 4403 7045 13209 17611250 10 550 1585 2906 4843 7925 13649 23335 28178300 12 881 2422 4403 7045 11447 22014 33022 37424350 14 1541 3434 6164 10567 17611 35223 47551 50633400 16 2157 4623 7925 13649 24216 48432 52834 63842450 18 2245 4755 8982 14750 26857 50633 64282 90259500 20 2289 4843 9686 15410 27298 52834 66483 92460600 24 3302 6164 12328 22455 38745 61640 96863 129004700 28 3390 7727 14353 26329 46670 75289 111393 158503800 32 5283 9950 20033 36236 56797 89378 129004 196368900 36 6780 10039 26549 46230 77490 128564 185581 2597691000 40 9686 17479 36544 63754 105669 163346 265493 3588341200 48 22234 34783 60760 86736 147496 234673 321629 451954
Operating pressureDN
[mm]Size[in] 50 psi
100 psi 150 psi
200 psi
150 6 366 458 714 954200 8 600 773 1282 1526250 10 1526 1831 1831 1831300 12 2034 2441 2563 2746350 14 3560 5492 5584 5340400 16 4272 6306 6865 6484450 18 7323 7587 7872 11442500 20 9154 11188 20642 28148600 24 10679 21359 27461 44472700 28 15866 22783 31580 61788800 32 21054 38649 60414 85435900 36 27461 49837 64991 110607
1000 40 46786 68958 105268 1861251200 48 79332 122049 192228 335636
TECHNICAL DATANominal diameter: DN 150 - DN 2000
bigger sizes upon request
Face-to-face: EN 558 Series 20ISO 5752 Series 20API 609 Table 1
Flange accommodation: EN 1092 PN 6/10/16/25ASME Class 150/300AS 4087 PN16/21
Flange Surface Design: EN 1092 Form A/BASME RF, FF
Top flange: EN ISO 5211
Marking: EN 19
Tightness check: EN 12266 (Leakage rate A) ISO 5208, Category 3
Temperature range: -40°F to +392°F (depending on pressure, medium and material)
Operating pressure: max. 200 psi
Double flanged butterfly valve with short construction length to be used in heavy duty applications.
FEATURES- Absolutely tight sealing with flow in either direction
- The valve body and disc are accurately machined which results in low operating torque and long service life and reliability
- Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operating service
- Can be disassembled, material-specific recycling possible
- Single flange mounting is possible
- Can be installed in any desired position
- Maintenance-free
- Fully repairable valve
GENERAL APPLICATIONS- Offshore
- Water and waste water technology
- Shipbuilding
- Power plants
Bigger sizes upon request All values in Inch Lbs
01-05_F012-K1_2014_USA.indd 2 11.08.2014 11:16:40
