1.5F 012-K1www.ebro-usa.comsales@ebro-armaturen.com

09.2017

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

TORQUE

Cv-VALUES

Subject to change without notice

- The torque values specified (Md) are based on liquid and lubricant media

- Powdery (non-lubricant) media Md x 1,3

- Dry gases/high viscous media Md x 1,2

- The values specified are based on the initial breakaway torque

- Dynamic torque specification available upon request

Regarding the dimensioning of actuators, please contact our engineers.

- The Cv Value [US Gallon per minute] is the flow of water at a temperature of 41°F to 86°F with a pressure drop of 1 psi.

- The throttle function is linear at an angle 30° to 70°

- Avoid cavitation

For further values, please contact our engineers.

Opening angle α°DN

[mm]Size[in] 20° 30° 40° 50° 60° 70° 80° 90°

150 6 58 109 199 352 592 942 1426 2067200 8 74 177 371 682 1137 1762 2581 3622250 10 205 338 653 1187 1975 3053 4456 6218300 12 239 475 972 1771 2915 4446 6403 8831350 14 371 687 1303 2323 3845 5972 8805 12445400 16 536 1005 2007 3624 5937 9026 12974 17860450 18 664 1245 2488 4491 7357 11186 16078 22134500 20 827 1551 3097 5592 9160 13927 20018 27558600 24 880 1650 3295 5949 9745 14817 21297 29319700 28 932 1523 4448 8787 14393 21883 31454 43302800 32 1209 1975 5074 11019 19519 30521 43971 59815900 36 1355 2214 6466 14044 24878 38900 56042 762361000 40 1686 2756 8049 17480 30965 48419 69755 948901200 48 2465 4035 11779 25581 45337 70872 102110 138907

Operating pressureDN

[mm]Size[in] 50 psi

100 psi 150 psi

200 psi

150 6 366 458 714 954200 8 600 773 1282 1526250 10 1526 1831 1831 1831300 12 2034 2441 2563 2746350 14 3560 5492 5584 5340400 16 4272 6306 6865 6484450 18 7323 7587 7872 11442500 20 9154 11188 20642 28148600 24 10679 21359 27461 44472700 28 15866 22783 31580 61788800 32 21054 38649 60414 85435900 36 27461 49837 64991 110607

1000 40 46786 68958 105268 1861251200 48 79332 122049 192228 335636

TECHNICAL DATANominal diameter: DN 150 - DN 2000

bigger sizes upon request

Face-to-face: EN 558 Series 20ISO 5752 Series 20API 609 Table 1

Flange accommodation: EN 1092 PN 6/10/16/25ASME Class 150/300AS 4087 PN16/21

Flange Surface Design: EN 1092 Form A/BASME RF, FF

Top flange: EN ISO 5211

Marking: EN 19

Tightness check: EN 12266 (Leakage rate A) ISO 5208, Category 3

Temperature range: -40°F to +392°F (depending on pressure, medium and material)

Operating pressure: max. 200 psi

Double flanged butterfly valve with short construction length to be used in heavy duty applications.

FEATURES- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results in low operating torque and long service life and reliability

- Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operating service

- Can be disassembled, material-specific recycling possible

- Single flange mounting is possible

- Can be installed in any desired position

- Maintenance-free

- Fully repairable valve

GENERAL APPLICATIONS- Offshore

- Water and waste water technology

- Shipbuilding

- Power plants

Bigger sizes upon request All values in Inch Lbs

Ø F

Ø Di

C

AB

Ø D Z

E

F012-K1_2010.indd 1 23.07.2010 12:12:48

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

MATERIAL SPECIFICATION AND PARTS LIST

Subject to change without notice

Subject to change without notice

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

F012-K1 with free shaft end acc. to EN ISO 5211 TS-version Version with splitted shaft

Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM1 Body 9/10 Shafts

Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 F2 Seal X5CrNiMo17-12-2 1.4401 316

NBR Acrylonitrile butadiene rubber Hastelloy 2.4883 HastelloyEPDM Ethylene propylene caoutchouc Bronze CuAlNiBZ 2.0975CSM Chlorsulphonated polyethylene 11 O-ringFPM Fluorocarbon caoutchouc NBR Acrylonitrile butadiene rubberVSI Silicon rubber FPM Fluorocarbon caoutchouc

3/4 Bearing sleeve 12 TS-discBronze RG 5 Nodular Cast Iron GGG-40 0.7040 60-40-18Polyamide Stainless Steel G-X5CrNiMo19-11-2 1.4408 A351CF8MPTFE Aluminium Bronze CuAl10Ni 2.0975 C 95800

5 Cover plate Coating Halar, RilsanGrey Cast Iron GG 25 0.6025 40 B Surface qualtiy electropolished, mirror finished

6 O-ring 13 TS-shaftNBR Acrylonitrile butadiene rubber Stainless Steel X14CrMoS17 1.4104 430 FFPM Fluorocarbon caoutchouc X39CrMo17-1 1.4122

7 Set screw DIN 915 X5CrNiMo17-12-2 1.4401 316Steel 45 H galvanized Bronze CuAlNiBZ 2.0975Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve

8 Disc Stainless Steel X5CrNi18-10 1.4301 304Steel St52.3 1.0570 572-50 15 O-ringStainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber

G-X5CrNiMo19-11-2 1.4408 A 351 CF8M 16 Shaft retainerX2CrNiMo17-12-2 1.4404 316 I Bronze RG 5 B 45X2CrNiMoTi17-12-2 1.4571 316 TI 17 Cover plateX2CrNiMoN22-5-3 1.4462 F 51 Grey Cast Iron GG 25 0.6025 40 BHastelloy 2.4883 Hastelloy 18 Screw

Aluminium bronze CuAl10Ni 2.0975 C 95800 Steel 45 H galvanizedCoating Halar, Rilsan Stainless Steel A2-70 B 8Surface quality electropolished, mirror finished A4-70 B8M

Other materials upon request

Dimensions [in] Weight [lb]GGG 40

DN[mm]

Size[in] A B C D Di E F Flange Z Splitted

shaftTS-

shaft150 6 7.99 5.91 13.90 12.01 5.83 2.20 3.54 F07 5.47 48.50 50.70200 8 8.98 6.93 15.91 13.78 7.83 2.36 3.54 F07 7.48 70.50 75.00250 10 10.47 8.35 18.82 16.93 9.76 2.68 4.92 F10 9.45 103.60 110.20300 12 11.46 9.33 20.79 18.90 11.65 3.07 4.92 F10 11.30 152.10 158.70350 14 13.07 10.59 23.66 21.26 13.31 3.62 5.91 F12 12.99 176.40 189.60400 16 14.29 12.36 26.65 23.82 15.28 4.02 5.91 F12 14.88 264.60 282.20450 18 15.63 13.19 28.82 26.57 16.93 4.49 8.27 F16 16.42 317.50 330.70500 20 17.20 15.94 33.15 27.95 19.47 5.00 8.27 F14/F16 18.66 359.30 374.80600 24 19.61 18.46 38.07 32.68 23.23 6.06 11.81 F16/F25 22.17 513.70 573.20700 28 22.87 19.96 42.83 35.63 26.77 6.50 11.81 F16/F25 25.98 643.70 760.60750 30 23.23 21.65 44.88 39.37 28.66 7.48 11.73 F25 27.68 - 1036.20800 32 24.80 21.89 46.69 40.16 30.71 7.48 11.81 F25 29.80 983.30 1027.30850 34 25.24 23.23 47.28 39.57 40.59 10.00 11.73 F25 31.77 - 1322.80900 36 27.40 24.29 51.69 44.09 34.65 7.99 11.81 F25 33.86 1252.20 1344.801000 40 30.35 26.57 56.93 49.21 38.58 8.50 13.78 F30 37.64 1375.70 1591.701050 42 32.17 28.54 60.71 52.99 40.59 10.00 13.78 F30 39.29 - 2248.701100 44 33.07 29.72 62.80 55.31 42.44 10.00 13.78 F30 41.18 - 2601.401200 48 35.63 31.89 67.52 58.27 46.06 10.00 13.78 F35 45.43 - 2160.501300 52 38.19 35.83 74.02 64.17 50.20 11.02 16.34 F35 48.98 - 3542.801350 54 39.37 35.63 75.00 66.34 52.76 11.02 16.34 F35 51.57 - 3880.101400 56 40.35 37.99 78.35 66.34 54.13 11.02 16.34 F35 52.99 - 3981.51500 60 43.9 41.73 85.63 73.03 57.95 11.02 18.7 F40 56.85 - 4872.21600 64 43.9 42.91 86.81 72.05 61.81 11.02 18.7 F40 60.83 - 5092.61650 66 48.23 45.28 93.5 80.12 64.8 11.02 18.7 F40 63.86 5643.81800 72 51.97 47.05 99.02 83.86 69.65 11.02 18.7 F40 68.78 6922.42000 78 55.12 51.57 106.69 89.17 77.24 20.67 20.67 F48 74.41 - 9096.2

Ø F

Ø Di

C

AB

Ø D Z

E

F012-K1_2010.indd 1 23.07.2010 12:12:48

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

MATERIAL SPECIFICATION AND PARTS LIST

Subject to change without notice

Subject to change without notice

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

F012-K1 with free shaft end acc. to EN ISO 5211 TS-version Version with splitted shaft

Pt. Description Material Material-No. ASTM Pt. Description Material Material-No. ASTM1 Body 9/10 Shafts

Nodular Cast Iron GGG-40 0.7040 60-40-18 Stainless Steel X14CrMoS17 1.4104 430 F2 Seal X5CrNiMo17-12-2 1.4401 316

NBR Acrylonitrile butadiene rubber Hastelloy 2.4883 HastelloyEPDM Ethylene propylene caoutchouc Bronze CuAlNiBZ 2.0975CSM Chlorsulphonated polyethylene 11 O-ringFPM Fluorocarbon caoutchouc NBR Acrylonitrile butadiene rubberVSI Silicon rubber FPM Fluorocarbon caoutchouc

3/4 Bearing sleeve 12 TS-discBronze RG 5 Nodular Cast Iron GGG-40 0.7040 60-40-18Polyamide Stainless Steel G-X5CrNiMo19-11-2 1.4408 A351CF8MPTFE Aluminium Bronze CuAl10Ni 2.0975 C 95800

5 Cover plate Coating Halar, RilsanGrey Cast Iron GG 25 0.6025 40 B Surface qualtiy electropolished, mirror finished

6 O-ring 13 TS-shaftNBR Acrylonitrile butadiene rubber Stainless Steel X14CrMoS17 1.4104 430 FFPM Fluorocarbon caoutchouc X39CrMo17-1 1.4122

7 Set screw DIN 915 X5CrNiMo17-12-2 1.4401 316Steel 45 H galvanized Bronze CuAlNiBZ 2.0975Stainless Steel X5CrNiMo17-12-2 1.4401 B8M 14 Sleeve

8 Disc Stainless Steel X5CrNi18-10 1.4301 304Steel St52.3 1.0570 572-50 15 O-ringStainless Steel X5CrNi18-10 1.4301 304 NBR Acrylonitrile butadiene rubber

G-X5CrNiMo19-11-2 1.4408 A 351 CF8M 16 Shaft retainerX2CrNiMo17-12-2 1.4404 316 I Bronze RG 5 B 45X2CrNiMoTi17-12-2 1.4571 316 TI 17 Cover plateX2CrNiMoN22-5-3 1.4462 F 51 Grey Cast Iron GG 25 0.6025 40 BHastelloy 2.4883 Hastelloy 18 Screw

Aluminium bronze CuAl10Ni 2.0975 C 95800 Steel 45 H galvanizedCoating Halar, Rilsan Stainless Steel A2-70 B 8Surface quality electropolished, mirror finished A4-70 B8M

Other materials upon request

Dimensions [in] Weight [lb]GGG 40

DN[mm]

Size[in] A B C D Di E F Flange Z Splitted

shaftTS-

shaft150 6 7.99 5.91 13.90 12.01 5.83 2.20 3.54 F07 5.47 48.50 50.70200 8 8.98 6.93 15.91 13.78 7.83 2.36 3.54 F07 7.48 70.50 75.00250 10 10.47 8.35 18.82 16.93 9.76 2.68 4.92 F10 9.45 103.60 110.20300 12 11.46 9.33 20.79 18.90 11.65 3.07 4.92 F10 11.30 152.10 158.70350 14 13.07 10.59 23.66 21.26 13.31 3.62 5.91 F12 12.99 176.40 189.60400 16 14.29 12.36 26.65 23.82 15.28 4.02 5.91 F12 14.88 264.60 282.20450 18 15.63 13.19 28.82 26.57 16.93 4.49 8.27 F16 16.42 317.50 330.70500 20 17.20 15.94 33.15 27.95 19.47 5.00 8.27 F14/F16 18.66 359.30 374.80600 24 19.61 18.46 38.07 32.68 23.23 6.06 11.81 F16/F25 22.17 513.70 573.20700 28 22.87 19.96 42.83 35.63 26.77 6.50 11.81 F16/F25 25.98 643.70 760.60750 30 23.23 21.65 44.88 39.37 28.66 7.48 11.73 F25 27.68 - 1036.20800 32 24.80 21.89 46.69 40.16 30.71 7.48 11.81 F25 29.80 983.30 1027.30850 34 25.24 23.23 47.28 39.57 40.59 10.00 11.73 F25 31.77 - 1322.80900 36 27.40 24.29 51.69 44.09 34.65 7.99 11.81 F25 33.86 1252.20 1344.80

1000 40 30.35 26.57 56.93 49.21 38.58 8.50 13.78 F30 37.64 1375.70 1591.701050 42 32.17 28.54 60.71 52.99 40.59 10.00 13.78 F30 39.29 - 2248.701100 44 33.07 29.72 62.80 55.31 42.44 10.00 13.78 F30 41.18 - 2601.401200 48 35.63 31.89 67.52 58.27 46.06 10.00 13.78 F35 45.43 - 2160.501300 52 38.19 35.83 74.02 64.17 50.20 11.02 16.34 F35 48.98 - 3542.801350 54 39.37 35.63 75.00 66.34 52.76 11.02 16.34 F35 51.57 - 3880.101400 56 40.35 37.99 78.35 66.34 54.13 11.02 16.34 F35 52.99 - 3981.51500 60 43.9 41.73 85.63 73.03 57.95 11.02 18.7 F40 56.85 - 4872.21600 64 43.9 42.91 86.81 72.05 61.81 11.02 18.7 F40 60.83 - 5092.61650 66 48.23 45.28 93.5 80.12 64.8 11.02 18.7 F40 63.86 5643.81800 72 51.97 47.05 99.02 83.86 69.65 11.02 18.7 F40 68.78 6922.42000 78 55.12 51.57 106.69 89.17 77.24 20.67 20.67 F48 74.41 - 9096.2

1.5F 012-K1www.ebro-usa.comsales@ebro-armaturen.com

09.2017

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

TORQUE

Cv-VALUES

Subject to change without notice

- The torque values specified (Md) are based on liquid and lubricant media

- Powdery (non-lubricant) media Md x 1,3

- Dry gases/high viscous media Md x 1,2

- The values specified are based on the initial breakaway torque

- Dynamic torque specification available upon request

Regarding the dimensioning of actuators, please contact our engineers.

- The Cv Value [US Gallon per minute] is the flow of water at a temperature of 41°F to 86°F with a pressure drop of 1 psi.

- The throttle function is linear at an angle 30° to 70°

- Avoid cavitation

For further values, please contact our engineers.

Opening angle α°DN

[mm]Size[in] 20° 30° 40° 50° 60° 70° 80° 90°

150 6 58 109 199 352 592 942 1426 2067200 8 74 177 371 682 1137 1762 2581 3622250 10 205 338 653 1187 1975 3053 4456 6218300 12 239 475 972 1771 2915 4446 6403 8831350 14 371 687 1303 2323 3845 5972 8805 12445400 16 536 1005 2007 3624 5937 9026 12974 17860450 18 664 1245 2488 4491 7357 11186 16078 22134500 20 827 1551 3097 5592 9160 13927 20018 27558600 24 880 1650 3295 5949 9745 14817 21297 29319700 28 932 1523 4448 8787 14393 21883 31454 43302800 32 1209 1975 5074 11019 19519 30521 43971 59815900 36 1355 2214 6466 14044 24878 38900 56042 762361000 40 1686 2756 8049 17480 30965 48419 69755 948901200 48 2465 4035 11779 25581 45337 70872 102110 138907

Operating pressureDN

[mm]Size[in] 50 psi

100 psi 150 psi

200 psi

150 6 366 458 714 954200 8 600 773 1282 1526250 10 1526 1831 1831 1831300 12 2034 2441 2563 2746350 14 3560 5492 5584 5340400 16 4272 6306 6865 6484450 18 7323 7587 7872 11442500 20 9154 11188 20642 28148600 24 10679 21359 27461 44472700 28 15866 22783 31580 61788800 32 21054 38649 60414 85435900 36 27461 49837 64991 110607

1000 40 46786 68958 105268 1861251200 48 79332 122049 192228 335636

TECHNICAL DATANominal diameter: DN 150 - DN 2000

bigger sizes upon request

Face-to-face: EN 558 Series 20ISO 5752 Series 20API 609 Table 1

Flange accommodation: EN 1092 PN 6/10/16/25ASME Class 150/300AS 4087 PN16/21

Flange Surface Design: EN 1092 Form A/BASME RF, FF

Top flange: EN ISO 5211

Marking: EN 19

Tightness check: EN 12266 (Leakage rate A) ISO 5208, Category 3

Temperature range: -40°F to +392°F (depending on pressure, medium and material)

Operating pressure: max. 200 psi

Double flanged butterfly valve with short construction length to be used in heavy duty applications.

FEATURES- Absolutely tight sealing with flow in either direction

- The valve body and disc are accurately machined which results in low operating torque and long service life and reliability

- Triple shaft bearings prevent shaft deflection and guarantee optimum guidance even after many years of operating service

- Can be disassembled, material-specific recycling possible

- Single flange mounting is possible

- Can be installed in any desired position

- Maintenance-free

- Fully repairable valve

GENERAL APPLICATIONS- Offshore

- Water and waste water technology

- Shipbuilding

- Power plants

Bigger sizes upon request All values in Inch Lbs