©20

14 Stitch

ed To

gether Studios

for Ben

artex, LLC

Uses Benartex’s On The Green collectionby Bristol Bay Studios

FiniShed Size: 43” x 60”

What better gift to give a golf lover, then an entirely golf-themed quilt. Hole In One is our new pattern using the

On The Green collection. Filled with iconic prints such asgolf tees, golf balls, argyle patterns, and filled with great

illustrations of golfers in action. A perfect gift!

THE QUILT SHOWN IS A DIGITAL REPRESENTATION. ACTUAL FABRIC REPEATS WILL VARY FROM DESIGN SHOWN.

SAMPLE KEY/SKU QTY CUT

A

On the Green @+ 630-44 Green

3/4 YD (3) 8-1/2” squares (fussy cut on bias)

B

On the Green Stripe @+ 631-44 Green

1/2 YD (2) 7-1/2" X 18" rectangles (fussy cut)

C

Champion Tour Patch @+ 632-55

Blue

3/4 YD (3) 8-1/2” squares (fussy cut on bias)

D

Fairway Argyle @ 634-40 Green

1/4 YD (2) 2-1/2" X WOF strips, subcut (12) 2-1/2" X 4-1/2" rectangles

E

Fairway Argyle @ 634-55

Dark Blue

1/4 YD (2) 2-1/2" X WOF strips, subcut (12) 2-1/2" X 4-1/2" rectangles

F

Fairway Argyle @ + 634-577

Brown

3/4 YD (2) 2-3/4” X WOF strips, subcut

(17) 2-3/4” squares

(1) 3-1/2" X WOF strips, subcut

(4) 3-1/2" squares

(6) 2-1/4" X WOF strips, BINDING

G

Tee Time Silhouette 638-40 Green

1 YD (1) 8" X WOF strips, subcut

(2) 8" squares, crosscut once

to create (4) HST

(5) 3-1/2" X WOF strips*, BORDER 6

H

Tee Time Silhouette 638-50

Blue

1 YD (1) 18-1/4" X WOF strip, subcut

(2) 18-1/4" squares, crosscut

twice to create (8) QST #

(1) 9-1/2" X WOF strip, subcut

(2) 9-1/2" squares, crosscut

Once to create (4) HST

I

Diamond Argyle 639-07 Natural

1 YD (7) 2-1/2" X WOF strips, subcut

(24) 2-1/2" X 4-1/2" rectangles

(24) 2-1/2" X 6-1/2" rectangles

(5) 1-7/8" X WOF strips*, BORDER 5

BLOCK 1&2 ASSEMBLY DIAGRAMS:

BLOCK 3 DIAGRAMS:

WOF = WIDTH OF FABRIC @ = DIRECTIONAL FABRIC + = EXTRA FABRIC ALLOWED FOR FUSSY CUTTING HST = HALF SQUARE TRIANGLE QST = QUARTER SQUARE TRIANGLE # = ONLY NEED 6 FOR QUILT * = SEW STRIPS VIA SHORT ENDS, GO TO BORDER ASSEMBLY ADDITIONAL SUPPLIES NEEDED: 1/3 YD. FUSIBLE WEB PRODUCT

BLOCK ASSEMBLY:

I E

E I I

UNIT 1 MAKE (6)

TRIM EXCESS 1/4”

E I I UNIT 2 MAKE (6)

A SQUARE

BLOCK 1 MAKE (3)

BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM

BLOCK 2 MAKE (3)

BLOCK 3 MAKE (2)

1.

Block 1: 1. Place (1) I 2-1/2" X 4-1/2" rectangle, right sides together, in one corner of (1) E 2-1/2" X 4-1/2" rec-tangle. Sew on diagonal as shown in diagram. Press with seam allowance towards E (darker) fabric. Trim excess fabric on reverse side to 1/4". Repeat for re-maining corner to create UNIT 1. Square to 2-1/2" X 8-1/2". Make (6). 2. As in step 1, create UNIT 2 using (2) I 2-1/2" X 6-1/2" rectangles and (1) E 2-1/2" X 4-1/2" rectangle. Square to 2-1/2" X 12-1/2". Make (6). 3. Sew (1) UNIT 1 to each side of (1) A 8-1/2" square, then sew (1) UNIT 2 to top and bottom to complete BLOCK 1. Square to 12-1/2", make (3). Block 2: 4. As in step 1, create UNIT 3 using (2) I 2-1/2" X 4-1/2" rectangles and (1) D 2-1/2" X 4-1/2" rectangle. Make (6). 5. As in step 2, create UNIT 4 using (2) I 2-1/2" X 6-1/2" rectangles and (1) D 2-1/2" X 4-1/2" rectan-gle. Square to 2-1/2" X 12-1/2". Make (6). 6. Sew (1) UNIT 3 to each side of (1) C 8-1/2" square, then sew (1) UNIT 4 to top and bottom to complete BLOCK 2. Square to 12-1/2", make (3). Block 3: 7. Find center of (1) B 7-1/2" X 18" rectangle and (1) G 8" HST, line up centers and then sew HST to rectangle. Repeat on other side with another G HST. Trim BLOCK 3 to 12-1/2”, make (2).

2.

3.

I I

4.

I I D

UNIT 3 MAKE (6)

UNIT 4 MAKE (6)

D

D D

D

D

I I

I I

C E E

E

E I

I

I

I

A

5.

G HST

B RECTANGLE

G HST

TRIM TO 12-1/2”

G

G

B

QUILT ASSEMBLY: Refer to QUILT DIAGRAM and COVER PHOTO for proper placement and rotation. 8. Sew the following together into diagonal rows: Row 1: H 18-1/4 QST – Block 1 – H 18-1/4 QST Row 2: H 18-1/4 QST – Block 2 – Block 3 – Block 2 Row 3: Block 1 – Block 3 – Block 1 – H 18-1/4 QST Row 4: H 18-1/4 QST – Block 2 – H 18-1/4 QST 9. Sew rows together, then sew (1) H 9-1/2” HST to each corner of the quilt. Trim quilt to 34-1/2" X 51-1/2".

BORDER ASSEMBLY: Measure width and length of quilt top to ensure border cutting sizes. Below are our measurements. Border #1: 10. Sew (1) I 1-7/8” X (51-1/2”) strip to each side of quilt, then sew (1) I 1-7/8” X (37-1/4”) strip to top and bottom. Border #2: 11. Sew (1) G 3-1/2” X (54-1/4”) strip to each side of quilt. 12. Sew (1) F 3-1/2” square to each end of (1) G 3-1/2” X (37-1/4”) bor-der strip. Make (2). Sew (1) FGF Border unit to top and bottom of quilt.

APPLIQUE INSTUCTIONS:

Following the directions on

your fusible web product, fuse

(17) F 2-3/4” squares to quilt,

using cover photo as a refer-

ence for proper placement.

FINISHING: Cut batting and

backing 3” larger than top on

all sides. Layer backing, bat-

ting and top together and

baste or pin. Quilt as desired.

When quilting is completed,

trim excess batting and back-

ing. Bind as usual.

QUILT DIAGRAM FINISHED SIZE: 43” X 60”

G

BENARTEX, LLC • 132 WEST 36TH STREET, 4TH FLOOR • NEW YORK, NY 10018 • T:212-840-3250 • WWW.BENARTEX.COM

Note: If this Benartex pattern is in-

cluded in a kit, any questions about the

kit should be addressed to the vendor

from whom you bought it.

H QST

H QST

H QST

H QST

H QST

H QST

H HST H HST

H HST H HST

G G

F F

I

I I

F

F F G

I