F-LED_255

HYUNDAI LED Co.,Ltd. 602-6 , Palgog-1Dong, Sangnok-Gu, Ansan-Si, Gyeonggi-Do, 426-200 South KoreaTel. +82-(0)31-389-1800 Fax. +82-(0)505-312-1800 E-mail : [email protected] Website : www.hyundailed.com

Channel Letter LED module F-LED 255 (Wide Beam Angle 155)

Hyundai LED Co.,Ltd.

I N T R O D U C T I O NHYUNDAI LED F-LED 255 is a LED illumination system for front-lit, back-litchannel letters and also indoor & outdoor decorations. F-LED 255 has 155wide beam angle and uniformed lighting distribution so that it can beapplied to the smaller depth channel letters and boxes like 40~100mm and alsototal module numbers in the letters can be reduced as compared to 120 beamangle LED modules. White color(6500K) is available and Samsung LED hasbeen applied. F-LED 255 provides many advantages like the brilliant light output,energy cost saving and maintenance cost reduction.

F E AT U R E S Samsung SMD LED (23x23 Package) Inside Lower power consumption (0.66W)

Wide Beam Agnle 155 Longer Life time (40,000~50,000hrs based on 70% light output)

Easy installation and maintenance

100% waterproof (IP67)

Safety due to low working voltage(12VDC)

5years warranty

A P P L I C AT I O N S Sign applications (smaller depth channel letters and boxes like 40~100mm) Indoor & Outdoor lighting decorations

C E R T I F I C AT I O N S UL(E258512),CE, RoHS

S P E C I F I C AT I O N S

Color White

Model No. BFL255-DW12

Input Voltage 12VDC

Operating Current 0.055A (Max.)

Power Consumption 0.66W (Max.)

Dimension 59mm(L) x 16mm(W) x 5.9mm(H)

View angle 155

Luminous Flux (Typ.) 40lm

Color Temperature(Typ.) 6500K (6000K~7000K)

Operating Temp. : -20 ~+70

F -L E D 2 5 5 (W ide B e a m )

P H Y S I C A I L S P E C I F I C AT I O N (U n it : m m )

L U M I N O U S I N T E N S I T Y D I S T R I B U T I O N (W H I T E , U n it : c d)

Red : Positive(+)White : Negative(-)

5.9mm

59mm

16mm

150mm

6.3cd

F -L E D 2 5 5 (W ide B e a m )

C O L O R R A N K

S E R I A L N o.

P A C K A G E

Ta=25

Measurement allowance is 0.01,

L 3 B4 W

L Manufacturing year- 2001 : A, .20012 : L

3

Month 1~9 1~9 Ex) July. 7 10 X 11 Y 12 Z

B4 Color RankB4 : 6000K~7000K

W LED Color

Rank Color Coordinates CCT

B4 x 0.3065 0.3178 0.3165 0.3046 6,000K~

7,000Ky 0.3192 0.3401 0.3480 0.3285

1pack =50 modules

1000modulesBFL255-DW12

F -L E D 2 5 5 (W ide B e a m )

I N S T A L L AT I O N

1) Clean inside the channel letters.

2) Remove VHB tapes on the backside of the modules and attach modules according to the layout determined. For firm fixing, use screws or silicone.

3)Connect modules in series or parallel with wire nuts or electric tapes after considering the maximum number of the module in series. And then, cap all the wires unused. Put the silicone into the wire nuts for the firm outdoor protection if possible.

Caution : Check out polarity. All connections must be Red(+ : Positive) to Red and White(- : Negative) to White.

4) Drill the holes at the bottom or side of the letters for the wire connection to DC power supplies, put the bushes into the holes and get wires out of the letters.

5)Connet DC wires from the letters to DC power supplies and AC wires from Input power source to DC power supplies. Check out DC polarity (+ : Positive, - : Negative) and AC connection (L,N,FG :1phase, 100~240VAC, 50/60Hz)

Caution :Electric power should be off when DC and AC wires connected to DC power supplies.

6)Electric power on and then check out if all the modules light on well.Please review all above if there are troubles.

Determine module amount, pitch and power supplies installed after considering channel depth, stroke, cover materials, total power consumption of the modules and so on.

F -L E D 2 5 5 (W ide B e a m )

I N S T A L L AT I O N Recommendable channel depth : 40mm~100mm Recommendable Installation pitch between centers of the modules :

80~100mm at 40mm~60mm depth, 100~120mm at 60~80mm depth, 120~150mm at 80~100mm depth Max. Module Number connected in series : 50modules Installation layout (Example) : Channel height 500mm, Channel depth-80mm, Stroke width -100mm

Primary DC Cable Specification Table Power Supply Capacity Table

Power Supply Max. Module Number connected

20W 12VDC 25modules

40W 12VDC 50modules

60W 12VDC 75modules

100W 12VDC 125modules



Total 63 modules (42W power consumption)

Module Number connected Cable Specification

~200modules VCTF 1.25X2C




P1H SW

D

Acryl cover or Diffusive PC cover

P2

H Channel Letter Height

D Channel Letter Depth 40mm~100mm

SW Channel Letter Stroke Width

E Distance between the center of the LED module to the edge of the Channel Letter 30mm~50mm

P1 Installation pitch in a row 80mm~150mm

P2 Installation pitch in a column 100~150mm

E

100W PS+ -

100~240VAC Input

12VDC Output

VCTF 1.25X 2C(Max.10m)

15pcs 13pcs 15pcs 13pcs 5pcs

F -L E D 2 5 5 (W ide B e a m )

Documents

F-LED_255