Upload
mario-sche
View
61
Download
4
Embed Size (px)
Citation preview
Acer Acer –LCD-F22
- 0 -
Service Manual LCD Monitor Acer F-22
1
1
Table of Contents
Important Safety Notice .........................................................................................01 01 Product Specification ..........................................................................................03 02 Flat Panel Specification .......................................................................................18 03 Exploded Diagram ..............................................................................................37 04 Troubleshooting ....................................................................................................39 05 Spare Parts List ...................................................................................................44 06 Schematics and Layouts.......................................................................................45 07 Assembly and Disassembly ................................................................................48 Appendix : User’s manual Copyright Copyright 2006 InnoLux Tech. Corp. Ltd All Rights Reserved This manual may not, in whole or in part, be copied, Photocopied, reproduced, translated, or converted to any electronic or machine readable form without prior written permission of InnoLux Tech. Corp. Ltd. Acer F-22 Service Manual
Acer Acer –LCD-F22
2
Important Safety Notice
1. Safety precautions This monitor is manufactured and tested on a ground principle that a user’s safety comes first. However, improper used or installation may cause damage to the monitor as well as to the user.
Warning: This monitor should be operated only at the correct power sources indicated on the label on the
rear of the monitor. If you’re unsure of the power supply in you residence, consult your local dealer or Power Company.
Do not try to repair the monitor by yourself, as it contains no user-serviceable parts. This monitor should only be repaired by a qualified technician.
Do not remove the monitor cabinet. There are high-voltage parts inside that may cause electric shock to human bodies.
Stop using the monitor if the cabinet is damaged. Have it checked by a service technician. Put your monitor only in a lean, cool, dry environment. If it gets wet, unplug the power cable
immediately and consult your closed dealer. Always unplug the monitor before cleaning it. Clean the cabinet with a clean, dry cloth. Apply
non-ammonia based cleaner onto the cloth, not directly onto the class screen. Do not place heavy objects on the monitor or power cord.
2. Product safety notice Many electrical and mechanical parts in this chassis have special safety visual inspections and the protection afforded by them cannot necessarily be obtained by using replacement components rated for higher voltage, wattage, etc. Before replacing any of these components read the parts list in this manual carefully. The use of substitute replacement parts, which do not have the same safety characteristics as specified in the parts list, may create shock, fire, or other hazards.
3. Service notes When replacing parts or circuit boards, clamp the lead wires around terminals before soldering. Keep wires away from high voltage, high temperature components and sharp edges. Keep wires in their original position so as to reduce interference. Adjustment of this product please refers to the user’ manual.
Acer Acer –LCD-F22
3
01 Product Specification
1. General: F22 series LCD monitor is designed with a wide screen 22.0” WSXGA+ TFT LCD panel, LVDS interface, analog RGB signal input. Additional a DVI-D input function is as option block. It featured with embedded universal AC power supply. This monitor can support maximum resolution up to 1680 x 1050@60Hz. It support HDCP and color management function.Details in this document DVI referred to is an option function depending on client’s requirement. In our factory,products should be distinguished by module names.
1.1 Main Features Maximum resolution : 1680 x 1050 @ 60Hz Back light system : 4 CCFL (top & bottom edge side) Pixel pitch : 0.282 (H) x 0.282 (V) Display area : 473.76(H)x296.1(V) 22.0 inch diagonal Brightness : ≥240cd/m² Contrast ratio : 10001׃ (typ.) (1) Response time (Tr+Tf) : 5ms (typ.) (2) Viewing angle : 160°(H)/ 160°(V), typ (3) Input interface : Analog (D-sub 15 pin) Digital Option(DVI-D 24 pin) Power management : Compatible with VESA DPMS Plug & Play : VESA DDCCI OSD language : English, French, Spanish, Italian, Deutsch, Simplified Chinese,
Traditional Chinese, Japanese (Dutch, Finnish, Russian depend on sale region) Universal AC power supply Note (1)(2)(3): This item spec depend on the LCD panel.
1.2 Accessories
AC Power Cord : 1.8 m. (Black. Cord type depend on sale region) VGA cable : 1.8 m. (15 pin D-SUB, black cable with blue male connector) User manual : English (640Mb CD) Warranty card DVI cable (option) : 1.8 m. (18+1 pin, black cable with white connector)
2. Operation Specifications The unit should suffer no visible cosmetic damage and should operate with no degradation in display quality during exposure to the operating conditions and after exposure to the non-operating conditions, in any sequence.
2.1 Environmental conditions 2.1.1 Operating:
Temperature range : 0°C to 40°C Relative humidity : 20% to 90%
2.1.2 Storage note 1:
Temperature range : -20°C to 60°C Humidity range : 10% to 90%
2.1.3 Altitude note 2 Operating 10000 ft (Ta=50, t=24h)
Acer Acer –LCD-F22
4
Storage 40000 ft (Ta=30, t=24h ) Note 1: Temperature and relative humidity range must be in the area shown as the following figure due to panel limited Note 2: Altitude spec must not over panel spec.
Figure 1 Absolute Ratings of Environment
2.2 Safety, EMC, Ergonomics and Compatibility Requirements
Safety & EMC cUL, UL, CE, CB, CCC, Nemko/Ergo,Nemko/Bauart, C-Tick (N214), VCCI, FCC, CE, CCC, BSMI, C-Tick
Ergonomics TCO99, TCO03
Compatibility Windows 98/Me/2000, Windows XP, Window Vista
Power Management Energy Star V4
2.3 Electrostatic Discharge Requirements The subject unit must withstand ±4KV for contact discharge and ±8KV for air discharge of Electrostatic Discharge and meet the standard of IEC61000-4-2(EN55024). (without discharge on VGA/DVI/HDMI pin)
2.4 Reliability The MTBF of this product shall be greater than 40,000 hours excluding the LCD panel. The LCD
panel life which is defined as the time period for the maximum luminance to reduce to 50% of the initial
value is 40,000 hours minimum at the condition of displaying an all WHITE field at mid Brightness and
Contrast settings.
3. Electrical and Optical Characteristics and Performance 3.1 Main Power Supply
3.1.1 AC Input Voltage Range It is a universal type and the input voltage range is from 100 ~ 240Vrms
3.1.2 AC Input Current
1.2A (max) at 100VAC input 0.6A (max) at 240VAC input
3.1.3 AC Frequency Range
The frequency range is from 50Hz to 60Hz
Acer Acer –LCD-F22
5
3.1.4 Inrush Current
a. 40A max at cold-start, 25°C, DC output full-loading and 100Vac input b. 60A max at cold-start, 25°C, DC output full-loading and 240Vac input
Notes: 1. Before each test, the buck capacitor need to be discharged. 2. Before each test, it must be 10 minutes at least after the latest test.
3.1.5 Regulator Efficiency ≥75% (DC output full loading and nominal AC input voltage range)
3.1.6 Ripple and Noise
Total composite ripple and noise less than 480mV for +16V output, and less than 150mV for +5V output, and 50mV for +3.3V output tested by DC loading side parallel with a 47uF/EC and 0.1uF/Ceramic. Capacitors and measured band-width with DC-20MHz
3.1.7 DC Output Voltage and Current
Current DC Output Voltage Typ. Max.
VCC16V 15.2V~18.5V 1.8A 2.2 A VCC5V 4.95~5.45V 1.5A 1.8A
Note: 1. For the normal loading test ,the output loading use typical current.
2. When 16V with no loading,the 16V out put rage is15.2V~20V
3.1.8 Protection a. SCP: For short circuited protection and with auto-recovery function.(for 5V output it must be shorted before F802) b. OPP: Over-power protection, Range: 60W ( min ) on nominal AC input. c. BOP: Brown Out protection
Condition: Pattern: Dot pattern, Timing: 1680x1050 60Hz, Brightness: Max.
Contrast: Max Spec: system shutdown voltage must be > 50V
system restart voltage must be <85V
3.1.9 Power consumption Max. 55W. Follow Energy Star V4 condition 49W
3.1.10 Power management
F22 supports Energy Star V4 and VESA DPMS
Status H-sync V-sync Video Power LED
On Mode/Active Power on on active ≤ 55W red
off on blanked < 2W Breathe Red Sleep Mode/Low Power
on off blanked < 2W Breathe Red
Acer Acer –LCD-F22
6
off off blanked < 2W Breathe
Red Off Mode/Standby Power -- -- -- < 1W Off
3.2 Backlight
Item Symbol Min. Typ. Max. Unit Remark
Input Voltage Vin 15.2 16.0 18.5 V Von 2.0 3.3 5.5 V
Enable (On/Off) Voff -0.3 --- 0.8 V
Kick off Voltage:
Item Symbol Min. Typ. Max. Unit Remark
Kick off Voltage Vs 1700 --- --- Vrms
On Load Function:
Item Symbol Min. Typ. Max. Unit Remark
Input Current Iin --- 1.8 2.2 A
Frequency F 40.0 45.0 80 kHz @Max-Load
Output Current for One Lamp
IL 2.0 7.0 8.0 mArms PWM dimming control mode
Operating Voltage Vo --- 750 --- Vrms
Brightness PWM duty
35% --- 100%
Kick Off Voltage Hold Up Time
T 1.0 1.5 --- S @Vin=16.0V Brightness=3.3V
Efficiency η 75% --- --- @Vin=16.0V Brightness=3.3V
3.3 Brightness output The test to verify specifications in this section shall be performed under the following standard conditions unless
otherwise noted.
Temperature : 25 ± 5°C Test pattern : white Video Resolution : 1680 x 1050 Video input level : 700 mV ± 2% Warm-up time : 30 minutes
Set brightness control and also contrast control at maximum, to measure the screen center, the light output
shall ≥ 240 cd/m2 (as panel spec)
3.4 White balance
Acer Acer –LCD-F22
7
The test standard conditions refer to Sec 3.3.(Brightness control is at 100 contrast control is at 50 )
Chromaticity Coordinate Mode
x y Cool 9300K 0.283 ± 0.030 0.297 ± 0.030
Warm 6500K 0.313 ± 0.030 0.329 ± 0.030
User Panel While x Panel While y
3.5 Brightness uniformity
The test standard conditions refer to Sec 3.4.
%≥75)(backlight points nine of luminance Max.)(backlight points nine of luminance Min. (4)
Fig.3
Note (4): 75% is for InnoLux panel MT220WW01 V.0, the second source panel BU spec follow Sec 5.1
4. Input / Output Signal Specifications 4.1 Video signals
Analog RGB signal: 0.7Vp-p (Input impedance = 75 Ohm) Sync: TTL level (Input impedance ≧ 1k Ohm)
Positive and negative sync of Separate Horizontal/Vertical Sync Digital : TMDS Signal: (min) ±200mVpp@24Bit
4.2 Signal Timing Through D-SUB/DVI/HDMI connectors, this unit can support FH= 31.5~84 KHz, Fv=56~75Hz, with maximum pixel clock 165MHz input signal and WSXGA+ output. Modes details as below:
VESA MODES
1 2
5
7 9
L/2 L/10
W/10
W/2
3
4 6
8
Acer Acer –LCD-F22
8
Horizontal Vertical
Mode Resolution Total Nominal Frequency +/-0.5KHz
Sync Polarity
Nominal Frequency
+/-1Hz
Sync Polarity
Nominal Pixel Clock
(MHz)
640*480@60Hz 800*525 31.469 N 59.941 N 25.175
640*480@72Hz 832*520 37.861 N 72.809 N 31.500 VGA 640*480@75Hz 840*500 37.500 N 75.000 N 31.500
800*600@56Hz 1024*625 35.156 P 56.250 P 36.000
800*600@60Hz 1056*628 37.879 P 60.317 P 40.000
800*600@72Hz 1040*666 48.077 P 72.188 P 50.000 SVGA
800*600@75Hz 1056*625 46.875 P 75.000 P 49.500
1024*768@60Hz 1344*806 48.363 N 60.004 N 65.000
1024*768@70Hz 1328*806 56.476 N 70.069 N 75.000 XGA 1024*768@75Hz 1312*800 60.023 P 75.029 P 78.750
1152*864@75Hz 1600*900 67.500 P 75.000 P 108.000 1280*960@60Hz 1800*1000 60.000 P 60.000 P 108.000 1152*720@60Hz 1488*748 44.859 N 59.972 P 66.750
1280*1024@60Hz 1688*1066 63.981 P 60.020 P 108.000 SXGA
1280*1024@75Hz 1688*1066 79.976 P 75.025 P 135.000
SXGA+ 1400x1050@60Hz 1864*1089 65.317 N 59.978 N 121.75
UXGA 1600*1200@60Hz 2160*1250 75.000 P 60.000 P 162.000
WXGA 1360*768@60Hz 1792*795 47.712 P 60.015 P 85.5
1440*900(Red)@60Hz 1600*926 55.469 P 59.901 N 88.75 WXGA+
1440*900@75Hz 1936*942 70.635 N 74.984 P 136.75
WSXGA+ 1680*1050@60Hz 2240*1089 65.290 N 59.954 N 146.250 IBM MODES
640*350@70Hz 800*449 31.469 P 70.087 N 25.175 EGA
720x400@70Hz 900*449 31.469 N 70.087 P 28.322 MAC MODES
VGA 640*[email protected] 864*525 35.000 P 66.667 P 30.240 SVGA 832*624@75Hz 1152*667 49.725 N 74.550 N 57.283
XGA 1024*768@75Hz 1328*804 60.241 N 74.927 N 80.000
1152*870@75Hz 1456*915 68.681 N 75.062 N 100.00 Other MODES
XGA 1024*768@72Hz 1360*800 57.669 N 72.086 N 78.434 SXGA 1280*1024@70Hz 1696*1072 74.882 P 69.853 P 127.000
Note: 1. Non-interlace signals only (An interlace signal cannot be display) 2. Please refer to F/W specification for more detail 3. Each frequency of Power Macintosh and Sun Ultra is a reference value
Acer Acer –LCD-F22
9
HDMI Preset Timming
4.3 Timing requirements The LCD monitor must be capable of displaying standard resolutions within the vertical frequency range of 56 ~ 75 Hz and the horizontal scan range of 31.5 ~ 84 KHz with maximum pixel clock of 190MHz. Vertical / Horizontal Sync polarity: positive or negative. If input signal is out of range of horizontal 31.5~84 KHz or vertical 56-75Hz, or pixel clock large than 165MHz, message “Input not Supported” is shown on screen.
4.4 DDC date F22 Analog
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 00 FF FF FF FF FF FF 00 04 72 60 00 00 00 00 00
1 00 00 01 03 08 2F 1E 78 EA DE 95 A3 54 4C 99 26
2 0F 50 54 BF EF 90 A9 40 71 4F 81 40 8B C0 95 00
3 95 0F 90 40 01 01 21 39 90 30 62 1A 27 40 68 B0
4 36 00 DA 28 11 00 00 1D 00 00 00 FD 00 38 4D 1F
5 54 11 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30
6 30 30 30 30 30 30 30 30 30 30 30 0A 00 00 00 FC
7 00 46 32 32 0A 20 20 20 20 20 20 20 20 20 00 EB
F22 DVI
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 00 FF FF FF FF FF FF 00 04 72 60 00 00 00 00 00
1 00 00 01 03 80 2F 1E 78 EA DE 95 A3 54 4C 99 26
2 0F 50 54 BF EF 90 A9 40 71 4F 81 40 8B C0 95 00
3 95 0F 90 40 01 01 21 39 90 30 62 1A 27 40 68 B0
4 36 00 DA 28 11 00 00 1D 00 00 00 FD 00 38 4D 1F
5 54 11 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30
Preset
Timing Name
Pixel Format
Horz Freq (kHz)
Horz Polarity
Vert Freq (kHz)
Vert Polarity
Pixel Rate (MHz)
Source
1 480P60 720x480 31.469 59.94 27 2 480i60 720x480 15.734 59.94 13.5 3 576P50 720X576 31.25 50 27 4 576i50 720X576 15.625 50 13.5 5 720p60 1280x720 45 60 74.25 6 1080i60 1920x1080 33.75 60 74.25 7 720P50 1280X720 37.5 50 74.25 8 1080i50 1920x1080 28.125 50 74.25 9 1080p50 1920x1080 56.25 50 148.5 10 1080p60 1920x1080 67.5 60 148.5
Acer Acer –LCD-F22
10
6 30 30 30 30 30 30 30 30 30 30 30 0A 00 00 00 FC
7 00 46 32 32 0A 20 20 20 20 20 20 20 20 20 00 73
F22 HDMI
0 1 2 3 4 5 6 7 8 9 A B C D E F
0 00 FF FF FF FF FF FF 00 04 72 60 00 00 00 00 00
1 00 00 01 03 80 2F 1E 78 EE DE 95 A3 54 4C 99 26
2 0F 50 54 BF EF 90 A9 40 71 4F 81 40 8B C0 95 00
3 95 0F 90 40 01 01 21 39 90 30 62 1A 27 40 68 B0
4 36 00 D9 09 11 00 00 1D 00 00 00 FD 00 38 4D 1F
5 54 11 00 0A 20 20 20 20 20 20 00 00 00 FF 00 30
6 30 30 30 30 30 30 30 30 30 30 30 0A 00 00 00 FC
7 00 46 32 32 0A 20 20 20 20 20 20 20 20 20 01 8E
0 02 03 1E F2 4B 10 1F 05 14 84 93 03 12 01 02 11
1 23 09 07 07 83 01 00 00 65 03 0C 00 10 00 02 3A
2 80 18 71 38 2D 40 58 2C 96 00 D9 09 11 00 00 18
3 02 3A 80 D0 72 38 2D 40 10 2C 45 80 D9 09 11 00
4 00 1E 01 1D 80 18 71 1C 16 20 58 2C 25 00 D9 09
5 11 00 00 9E 01 1D 80 D0 72 1C 16 20 10 2C 25 80
6 D9 09 11 00 00 9E 01 1D 00 BC 52 D0 1E 20 B8 28
7 55 40 D9 09 11 00 00 1E 00 00 00 00 00 00 00 FB
5. Function Specifications
All the tests to verify specifications in this section shall be performed under the following standard conditions unless otherwise noted. The standard conditions are:
Temperature : 25 ± 5°C Warm-up time : 30 minutes minimum Checking display modes : All the specified modes
5.1 Panel general specifications 5.1.1 General specifications
Supplier: INL
Model name SEC LTM220M1-L01(SDBL-Glare)
Display Area 473.76(H)x296.1(V) mm
Pixel Pitch 0.282 x 0.282 mm
Display Colors: 16.7 Million (RGB 8-bit data)
Number of Pixel 1680x1050 pixels
Pixel Arrangement RGB vertical stripe
Brightness 300cd/m2 (Typ.) 250cd/m2 (Min.)
Contrast Ratio 1000:1 (Typ.), 600:1(Min)
Acer Acer –LCD-F22
11
Viewing Angle Hor:160°, Ver: 160°(Min, CR>10)
Brightness Uniformity Min/Max 0.75≧
Display Mode Normally White
Response Time(Tr+Tf) 5ms (Typ.), 10ms (Max.)
Surface Treatment Anti-glare, Hard coating (3H)
Lamp 4 CCFL
5.1.2 LCD module defects
LCD module defects check follows IIS. Details refer to panel approval sheet: Part NO. 631102200030R and 631102200060R
5.2 Keypad Function 5.2.1 Control buttons
[AUTO]
A. When OSD un-displays, press [AUTO] to perform auto-adjustment B. When OSD displays, press [AUTO] to return to previous level menu C. When “e Color OSD” OSD displays, press [AUTO] to exit the OSD
[MENU]
A. When OSD isn’t shown on screen, press [MENU] to enter OSD interface.The OSD interface uses “ACER eColor Management” and “User” to instead “Contrast” and “Brightness” separately.When press “ACER eColor Management” to show “e Color OSD”,and press “User” to show OSD interface before. The translations of “ACER eColor Management” and “User” are always English.
B. When OSD displays, press [MENU] to perform function of menu icon that is highlight or enter next level menu
[], [] When “MENU OSD” displays, press these keys to change the contents of an adjustment item, or change an adjustment value
[e Color ]
A. When OSD un-displays, press [e Color] to show “e Color OSD”,and press again the OSD can not disappear,but the time of “e Color OSD”disappearing is reseted 10 second again.
B.When OSD disappear not including “e Color OSD”,press [e Color] to show “e Color OSD” OSD,the OSD before disappears,but the parameters of it should be saved
[POWER] Power on or power off the monitor
5.2.2 Hot Key Operation
HOT KEY OPERATION FUNCTION
e Color AUTO MENU POWERDESCRIPTION
FACTORY MODE
ON Press [e], and then press [POWER] for DC power on. OSD menu will be shown with “F” on the left top. Select “F” for entering factory mode.
5.3 OSD Structure The On-Screen Display (OSD) shall be an easy to use icon based menu through keypad OSD buttons or remote control unit. The unit shall leave the factory with all OSD controls set to their default values.
Acer Acer –LCD-F22
12
First Second Third Fourth Control Range Default Value
Acer eDisplay Management Empowering technology --- --- ---
User mode 77
Text mode 44
Standard mode 77
Graphics mode 97
Brightness --- --- 0~100
Movie mode 77
User mode 50
Text mode 50
Standard mode 50
Graphics mode 60
Contrast --- --- 0~100
Movie mode 56
H.Position 0~100 50
V.Position 0~100 50
Focus 0~100 ---
Clock
--- ---
0~100 50 1
Warm --- --- ---
Cool --- --- ---
Red 0~100 80
Green 0~100 80
Colour Temp
User
Blue 0~100 80
Picture
Auto Config --- --- --- ---
H.Position --- --- 0~100 50
V.Position --- --- 0~100 50 OSD
OSD Timeout --- --- 10~100 20
Full --- --- --- Wide Mode
Aspect --- --- ---
DDC/CI --- --- --- ON Setting
ACM --- --- --- OFF
Acer Acer –LCD-F22
13
6. SOP of firmware upgrade
6.1 Operational condition: Equipment: PC, ISP card, signal cable and power cable. ESD requirements: antistatic wrists, antistatic gloves (fingers), and connecting cable Name of ISP program: RTDTool_4.6.exe Manufacture of FW IC:RTD 2525L
6.2 Operational steps: 1. Connection: connect PC to PCBA with signal cable, and then keep AC and DC in open state.
2. Adjust ISP programming
Firstly, double click ISP_Tool_v3.7.5EXEI and open ISP program, then select “Device”, next select manufacturer model of FW IC, which should be correspondent with that of PCBA FW IC. Double click Figure One.
FW IC
Model
One port of ISP program card
is connected to PC print port.
Acer Acer –LCD-F22
14
Secondly﹐download FW software: first select “READ”, and then load FW software in Rooter (Fig.2).
Thirdly, select “Connect” and enter ISP MODE as in the following Figure 3.
Software Checksum
FW software rooter
Acer Acer –LCD-F22
15
Fourthly, select “AUTO”, and keep its default value. Click “RUN” for beginning programming. There will be prompting if programming is OK.
Note: if programming fails or success rate is not high, click “Config” and adjust its speed in “E2PROM DEVICE SETTING”
Acer Acer –LCD-F22
16
Flowing chartAfter connecting, AC ON,
DC ON
Open ISP program
Choose manufacturer and model of FW IC
LOAD FW software
Click Connect and enter ISP MODE
Click AUTO and RUN for
beginning programming
Turn off power if programming is OK
OK
OK
OK
OK
OK
OK NG
Choose Config and adjust
programming
Acer Acer –LCD-F22
17
02. Flat Panel Specification
Acer Acer –LCD-F22
18
Acer Acer –LCD-F22
19
Acer Acer –LCD-F22
20
Acer Acer –LCD-F22
21
Acer Acer –LCD-F22
22
Acer Acer –LCD-F22
23
Acer Acer –LCD-F22
24
Acer Acer –LCD-F22
25
Acer Acer –LCD-F22
26
Acer Acer –LCD-F22
27
Acer Acer –LCD-F22
28
Acer Acer –LCD-F22
29
Acer Acer –LCD-F22
30
Acer Acer –LCD-F22
31
Acer Acer –LCD-F22
32
Acer Acer –LCD-F22
33
Acer Acer –LCD-F22
34
Acer Acer –LCD-F22
35
Acer Acer –LCD-F22
36
Acer Acer –LCD-F22
37
Acer Acer –LCD-F22
38
Acer Acer –LCD-F22
39
Acer Acer –LCD-F22
40
Acer Acer –LCD-F22
41
Acer Acer –LCD-F22
42
Acer Acer –LCD-F22
43
Acer Acer –LCD-F22
44
Acer Acer –LCD-F22
45
Acer Acer –LCD-F22
46
Acer Acer –LCD-F22
47
Acer Acer –LCD-F22
48
Acer Acer –LCD-F22
49
Acer Acer –LCD-F22
50
Acer Acer –LCD-F22
51
Acer Acer –LCD-F22
52
03 Exploded Diagram 3.1. Screw list F22 ITEM PN Description UNIT Q'TY
1 509146306200R SCREW,P,CROSS,W/WAS,M3*6,Zn-Cc PCS 7
2 509216608510R SCREW,F,CROSS,M4*8,BLACK,NL,ROHS(NYLOK) PCS 4
3 509112308500R SCREW,P,CROSS,T.T-3*8,Zn ROHS PCS 1
4 509412610500R SCREW B CROSS T T-4*10 BLK ROHS PCS 3
5 509212608120R SCREW,F,CROSS,T4*8,Zn,ROHS(5.8~6.2) PCS 10
6 509000000700R BOLT,#4-40x11.8,Ni PCS 4
7 509116610110R SCREW P CROSS M4*10 Zn NL ROHS PCS 2
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
From keypad
Change R109 to 360ohm
KIDD
Add for EMI
V0172
A4
P224W
DC to DC
2008-05-24
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
Q103_1
Q103_2LED_A
LED_G
Backlight_ON/OFF
LED_G
Backlight_ON/OFF
LED_A
Q103_2
Q103_1
Volume 6
HDMI_Audio_L 7
Mute 6
Brightness_PWM 6
HDMI&PC_audio_switch 6HDMI_Audio_R 7
VCC5V 5,6,7
VCC5V5,6,7
VLCD
VCC5V
VCC3.3
VCC3.3
VCC5V
VCC5V
VCC5V
VCC5V
VCC1.8
VCC5V
R108 4K7
C10
70.
1/16
V
R10
420
K
C17
20.
1/16
V
R110 100
C11
00.
1/16
V
U102AP1084K33LA
3
1
2VIN
AD
J
VOUT
R113 100
C111
1u/10V
C17
30.
1/16
V
R101 33K
C114
1000p/50V/N
C
C10
30.
1/16
V
R10
920
K
R112 100
C112
1000p/50V/N
C
C116
1000p/50V/N
C
R107 4K7
C10
50.
1/16
V
Q106PMBT3904
1
32
Q101PMBT3904
1
32
CN102
12P 2.0mm
123456789
1110
12
U101LD1117AL-1.8V
3
1
2VIN
AD
J
VOUT
R106 100
13
2
Q110PMBT3906
R239 4K7
CN101
2x4P 2.0mm
12345678
Q103PMBT3904
1
32
Q102AP2305GN
1
32
C18
40.
1/16
V
13
2
Q105PMBT3906
R10
351
R105 100
C10
10.
1/16
V
C10
80.
1/16
V
C10
60.
1/16
V
C18
50.
1/16
V
C19
30.
1/16
V
C113
1000p/50V/N
C
Q1042N7002
1
32
+
C18
610
0u/1
6V
C115
1000p/50V/N
C
C117
1000p/50V/N
C
+
C10
910
0u/1
6V
R11
14K
7
+
C10
410
0u/1
6V
C17
40.
1/16
V
C19
2
1000p/50V/N
C
Panel_Enable 6
VLCD 6
CCFL_Enable 6
VCC3.33,4,5,6
POWER 6
VCC1.8 6
E-Color 6AUTO 6
LED_A_C 6
LED_G_C 6
RIGHT/LEFT 6MENU 6
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
KIDDV0173
A4
P224W
Input
2008-05-24
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
DE
TEC
T
R BG
DETECTDet
G
B
R
DAT0-
DCLK-
DAT1+
DCLK+
Det
DAT2-
DAT0+
DAT2+
DAT1-
DDC_SDA_DVIDDC_SCL_DVI
DAT0-
DAT1-
DCLK-
DAT1+
DAT0+
DAT2+
DDCA_SDADDCA_SCL
DDCA_SCL
DCLK+DAT2-
DDCA_SDA
DDC_SCL_DVIDDC_SDA_DVI
DVI_RX0- 5DVI_RX0+ 5
DVI_RX1+ 5DVI_RX1- 5DVI_RX2+ 5DVI_RX2- 5DVI_RXC+ 5DVI_RXC- 5
DDC_SCL_DVI 5DDC_SDA_DVI 5
DVI5V 5
PC5V_VGA
VCC3.3
PC5V_VGA
VCC3.3
DVI5V
DVI5V
VCC3.3
VCC3.3
C120 0.047u/16V
CN103DVI-D_CON
12345678
910111213141516
1718192021222324
RX2-RX2+GNDRX4-RX4+
SCLSDA
VS
RX1-RX1+GNDRX3-RX3+
5VGND
HP
RX0-RX0+GNDRX5-RX5+GND
RXC+RXC-
R127 0
R123 100
EP
109
5P20
V
C13
30.
1/16
V
R116 100
EP
107
5P20
V
EP
102
5P20
V
R146 10 1%
R133 100
D106BAV991
3
2
R149 10 1%
R117 0
C12
933
p/50
V
R147 10 1%R
153
4K7
CN104DZ11AA1-H5W6-4F
162738495
11
12
13
14
1510
1617
R124 470
R13
775
1%
EP
110
5P20
VR136
4K7
R120 0
D103BAV991
3
2
R115 100
EP
108
5P20
V
R130 100
C119 0.047u/16V
R145 10 1%
R119 100E
P10
35P
20V
EP
101
5P20
V
C12
50.
1/16
V
D107BAV991
3
2
R148 10 1%
C121 0.047u/16V
R129 1K
U103
AT24C02BN
1234 5
678A0
A1A2GND SDA
SCLWP
VCCC13
20.
1/16
V
EP
111
5P20
V
R15
04K
7
R118 100
C118 0.047u/16V
C19
010
00P
F
R125 100
D104BAV991
3
2
C12
7N
C/3
3p/5
0V
R144 10 1%
EP
104
5P20
V
R14
02K
2
C12
6N
C/3
3p/5
0V
R121 100
R142 10 1%
C123 0.047u/16V
R128 10K
U104
AT24C02BN
1234 5
678A0
A1A2GND SDA
SCLWP
VCC
EP
112
5P20
V
D108BAV991
3
2
R13
875
1%
Q107PMBT3904
1
32
FB101120Ω
R15
14K
7
C122 0.047u/16V
C19
10.
1/16
V
C13
1N
C/0
.1/1
6V
EP
105
5P20
V
D105BAV991
3
2
R122 100
R143 10 1%
R132 100
EP
106
5P20
V R13
44K
7/N
C
D110BAV70
32
1
C12
8N
C/3
3p/5
0V
R14
12K
2R
152
4K7
C13
022
0p/5
0V
R131 4K7
R126 0
D102BAV991
3
2
R135 100
R13
975
1%
R114 0
C124 0.047u/16V
D111BAV70
32
1
D109BAV991
3
2
GNDR 6GIN 6GNDG 6
RIN 6
SOG 6
VSYNC 6
GNDB 6BIN 6
HSYNC 6
DET_VGA 6
DVI_HP_CTRL 5
WP_VGA 4,6
DDCA_SCL 6
DDCA_SDA 6
WP_VGA 4,6
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
For cable detect
V0174
Custom
P224W
HDMI Input
2008-05-24
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
DDC_SDA_HDMI
HRXCN
DDC_SCL_HDMI
HRX2P
HDMI_HPD
HRX0N
HRX2NHRX1P
HRX1NHRX0P
HRXCP
HRX1N HRX0PHRX1P HRXCPHRX2N HRXCNHRX0NHRX2P
HDMI_HP_CTRL 5
DDC_SCL_HDMI 5
WP_VGA3,6
VCC3.32,3,5,6
DDC_SDA_HDMI 5
HDMI_RX1- 5
HDMI_RX0- 5
HDMI_RX1+ 5
HDMI_RXC- 5
HDMI_RXC+ 5
HDMI_RX0+ 5
HDMI_RX2- 5
HDMI_RX2+ 5
HDMI_5V 5
HDMI_5VVCC3.3
HDMI_5V
EP11
75P
20V
EP12
1N
C/F
ast
Q109
PMBT39041
32
EP12
2N
C/F
ast
C1340.1/16V
R16
04K
7
EP12
3N
C/F
ast
EP11
35P
20V
EP12
4N
C/F
ast
EP11
45P
20V
EP12
5N
C/F
ast
R154 100
C1350.1/16V
Q108PMBT3904
1
32
U105
AT24C04N
12345
678 A0
A1A2
GNDSDASCLWPVCC
D112
BAV70
321
EP11
8N
C/F
ast R
159
4K7
EP11
65P
20V
R156 100
EP11
9N
C/F
ast
R155
1K
R227 4k7
CN10519P 0.5mm R/A
12345678910111213141516171819
202122 23
EP12
0N
C/F
ast
R158 100
DET_VGA 3,6
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
DVI_HDMI_SWT =1 The voltage level
MUST <=3.3V and >2V
Fairchild for DVI and HDMI switch
Used for dual input(without HDMI) only
V0175
Custom
P224W
SWITCH
2008-05-24
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
5V_C DIGITAL_5V
DVI_HDMI_SWT 6
VCC5V 2,6,7DIGITAL_5V DVI5V3 HDMI_5V 4
DDC_SCL_DVI3DDC_SDA_DVI3
HDMI_HP_CTRL4
CLK+ 6
G+ 6
B- 6B+ 6
R+ 6
G- 6
R- 6
CLK- 6
HDMI_RXC-4
HDMI_RX2-4
HDMI_RX0-4
HDMI_RX2+4
HDMI_RXC+4
HDMI_RX1-4
HDMI_RX0+4
HDMI_RX1+4
DVI_RX1+3
DVI_RX2+3
DVI_RXC-3
DVI_RX0+3
DVI_RX2-3
DVI_RXC+3DVI_RX0-3
DVI_RX1-3
DVI_RX1+3
DVI_RXC+3
DVI_RX0+3
DVI_RX2+3
DVI_RX0-3
DVI_RX1-3
DVI_RX2-3
DVI_RXC-3
R+ 6
G+ 6
CLK- 6
B- 6
G- 6
B+ 6
CLK+ 6
R- 6
DDC_SCL_DVI3DDC_SDA_DVI3
5V_C
5V_C
R229 0
D113
BAV70
321
R230 0
R228 0
C1400.1/16V
C142
R231 0
R232 0
C1410.1/16V
C1370.1/16V
R233 0
C1380.1/16V
R234 0R235 0
C1390.1/16V
D114
BAV70
32 1
U106
FSHDMI08
123456789
10111213141516171819202122232425262728
56555453525150494847464544434241403938373635343332313029
1CLK-1CLK+1D0-1D0+GND1D1-1D1+1D2-1D2+GND2CLK-2CLK+2D0-2D0+GND2D1-2D1+2D2-2D2+VCC3CEC1SCL1SDA1HPD1CEC2SCL2SDA2HPD2
VCC3VCC3CLK-CLK+GND
D0-D0+
GNDD1-D1+
GNDD2-D2+
GNDSEL#OE
VCC3VCC3GND
DGNDCECSCLSDAHPD
SDDC#OEDDC
DGNDVDDC
R236 0
R238 0
R237 0
DDC_SCL_HDMI4DDC_SDA_HDMI4
DDCD_SCL 6DDCD_SDA 6
DVI_HP_CTRL3
HP_CTRL 6
VCC3.32,3,4,6 VCC3.32,3,4,6
VCC3.32,3,4,6
DDCD_SCL 6DDCD_SDA 6
DVI_HP_CTRL3 HP_CTRL 6
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
456
KIDD
Set Pin50&Pin73 asa CMOS I/O
For touch-pad
V0176
A3
P224W
SCALER
2008-05-24
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
21
3
F_WP
SDO
33
SCKSCZ
22
SDI
11
4455 5
4
44 2
55 322 433 5
F_WP
I2S_DATA 7
I2S_Bit_CLK 7
I2S_WS_LRCK 7I2S_System_MCLK 7
VCC3.3 VDDP_33
VDDC_18VCC1.8 AVDD_18
AVDD_33
VCC3.3 AVDD_33
VDDP_33
AVDD_18VDDC_18 VDDP_33AVDD_33
VLCD
VCC3.3
VCC5V
AVDD_MBMPLLVCC3.3
AVDD_MBMPLL
C15
50.
1/16
V
R17
2N
C/4
K7
R224 0
C16
20.
1/16
V
R183 1KR219 0
+C166
NC/10u/25VC1680.1/16V
R16
810
K
R225 0
C14
60.
1/16
V
R17
34K
7
C15
80.
1/16
V
U109
SST25VF010A
12
34 5
678
CS#SO
WP#GND SI
SCKHOLD#VCC
FB102
60Ω
C16
00.
1/16
V
R19
710
K
R220 0
C16
30.
1/16
V
C15
10.
1/16
V
R16
54K
7
C15
00.
1/16
V
R196 NC/0
R187 100
R16
44K
7
CN106
FFC-CON
1234
6
8
10
12
14
16
18
20
22
24
26
28
30
7
9
11
13
15
17
19
21
23
25
27
29
5
R222 0
C15
60.
1/16
V
C170 22p/50V
R198 NC/0
R16
64K
7
R17
44K
7
R184 1K
R17
04K
7
X10114.31818MHz
R221 0
FB103
60Ω
R188 1K
R185 100
C14
80.
1/16
V
C175 0.1/16V
C1651u/16V
C16
10.
1/16
V
TSUMO58CWDJ
U108
28
25
2623
27
24
223233
7
31
30
41
4342
44
51
80
128
127
8182
8384
858691929394
9596979899100
797877
1 11
9101213
8
15161819
17 29 52
104
87
37
103
112
3435
56
118
14 107
36
73
119120121
123124
117
116
115
3839
108
34
53 74 40 59
72 88 101
7675
102
109
126
114
111
110
20
9089
122
2
113
56 5557 61 64 70 67
21
106
105
47
46
48
50
49
4568 69 63 62
60 65 66 71
125
5458
RIN0P
GIN0P
SOGIN0BIN0P
RIN0M
GIN0M
BIN0MHSYNC0VSYNC0
REXT
REFP
REFM
SDO
SCKCSZ
SDI
GPIO_P24/PWM2
LVACKM
XIN
XOUT
LVA2PLVA2M
LVA1PLVA1M
LVA0PLVA0MLVB3PLVB3M
LVBCKPLVBCKM
LVB2PLVB2MLVB1PLVB1MLVB0PLVB0M
LVACKPLVA3MLVA3P
GN
DG
ND
RX2PRX2NRX1PRX1N
AV
DD
_33
RX0PRX0NRXCKPRXCKN
GN
DG
ND
GN
D
VDD
C
VDD
P
MODE
VC
TRL
VDD
P
DDCA_SDA/RS232_TXDDCA_SCL/RS232_RX
DDCD_SDADDCD_SCL
NC
AV
DD
_33
VDD
P
GPIO_P22/PWM1
GPIO_P04
GPIO_P00/SAR0GPIO_P01/SAR1GPIO_P02/SAR2
GPIO_P06GPIO_P07
NC
NC
NC
I2C_MDAI2C_MCL
RST
GPIO_P15GPIO_P16
VDD
CVD
DC
VDD
PVD
DP
GN
DG
ND
GN
D
LVA
4MLV
A4P
BYPASS
GPIO_P25
VDD
C
VDD
P
NC
NC
AV
DD
_33
LVB
4MLV
B4P
GPIO_P03/SAR3
GPIO_P14/PWM0
GN
D
NC
NC
NC
NC
NC
NC
NC
AV
DD
_18
GN
DG
ND
GPIO45
GPIO46
GPIO44
GPIO42
GPIO43
GPIO47G
ND
GN
DG
ND
GN
D
VDD
PVD
DP
VDD
PVD
DP
GPIO_P13/PWM2
VDD
PVD
DP
C14
70.
1/16
V
R17
54K
7
R16
74K
7
R191 100
R17
14K
7
+
C14
322
u/25
V
+
C171
10u/25V
R193
4K7
R17
64K
7
R189 1K
C169 22p/50V
R192 390 1%
R190 1K
R10
24K
7
R218 0
C167
0.1/16V
R186 100
C14
40.
1/16
V
C14
90.
1/16
V
C15
20.
1/16
V
C15
70.
1/16
V
R19
510
K
C15
30.
1/16
V
R226 0
R182 1K
+
C15
922
u/25
V
R194 NC/10K
R217 0
C15
40.
1/16
V
FB104
60Ω
C16
40.
1/16
V
C14
50.
1/16
V
DDCA_SDA3
DDCD_SDA5
B+5
G+5R-5
CLK+5
G-5
CLK-5
R+5
B-5
HSYNC3VSYNC3
SOG3GNDG3
GNDR3RIN3
GIN3
GNDB3BIN3
DDCA_SCL3
CCFL_Enable 2Panel_Enable 2
DDCD_SCL5
VCC5V2,5,7
Brightness_PWM 2
Mute 2
VCC3.32,3,4,5
DVI_HDMI_SWT 5
Volume 2
DET_VGA 3
HP_CTRL 5
LED_A_C 2
LED_G_C 2HDMI&PC_audio_switch 2
WP_VGA 3,4
MENU 2
AUTO 2
POWER 2RIGHT/LEFT 2
E-Color 2
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
R=1K , C=(1200PF,Fc=132KHz) ,(2200PF,Fc=72KHz) ,(3300PF,Fc=48KHz) , (4700PF Fc=34KHz)
V0177
A
P224W
HDMI AUDIO
2008-05-24
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
I2S_Bit_CLK6
HDMI_Audio_R2
I2S_WS_LRCK6
HDMI_Audio_L2
I2S_DATA6
I2S_System_MCLK 6VCC5V 2,5,6
VCC5V
+
C17910u/25V
+ C177100u/16V
U111
Ti_I2S_PCM1754
1
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
BCK
DATA
LRCK
DGND
NC
VCC
Vout_L
Vout_R
SCK
FMT
MUTE
DEMP
TEST
ZEROA
Vcom
AGND
+
C18210u/25V
C1813300p/50V
C1780.1/16V
C1833300p/50V
R1990
+C180
10u/25V
R204
1K
R2020
R2000R2010
R203 1K
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
LED_AE_ColorAUTO
GND
MENURIGHT/LEFT
LED_GPower
PCB Footprint sameGatway tuach pad
PCB Footprint sameILK-090 tuach pad
S4
TP_A
TTN
S2
S0
S1
TP_S
CL
SHIELD
TP_S
DA
S3
SCL
+3.3V
LED_GPower
LED_A
SDA
ATTN
GND
+3.3V+3.3V
U901SO3800
123
654
7
8 9 10 11 12
1314
1617
15
19
20
21222324
18
25
GPIO6GPIO5GPIO4
GPIO1GPIO2GPIO3
GPIO0
SH
LDS
0S
1S
2S
3
S4S5
S7GND
S6
VDD
GN
D
DN
CS
DA
SC
LA
TTN
XCAP
GN
D
CN9024P 1.25mm SMD
1234
D90
5LE
D5
D90
3LE
D3
D90
2LE
D2
D90
1LE
D1
T903PAD21
R901
22
C903150p/50V/NC
T902PAD31
T905PAD01
T904PAD11
T901PAD41
C9021uF/10V
C9011uF/10V
CN901
8P 1.25mm SMD
12345678
D90
5LE
D5
D90
4LE
D4
TEST1PAD01
D90
5LE
D5
5
5
4
4
3
3
2
2
1
1
D D
C C
B B
A A
Keypad Board
PCB Footprint same PX193W keypad
POWER
Pitch=1.25mm
V0111
A
P224W
Keypad
2008-2-23
InnoLuxDocument Number : SIZE :
TITLE :
DATE :
SHEET OFRev :
DRAWN BY :
CHECK BY :
APPRO BY :
POWER
GNDLED_A
EP
902
5P20
V
ZD10
16V
2
SW901
1
2
CN901
4P 1.25mm SMD
1234
D90
1LE
D6
C90
10.
1/16
V
Acer Acer –LCD-F22
53
04 Trouble Shooting
1. No Power & LED Off
yes
yes
yes
yes
NG
NG
NG
NG
NG
NG
Unstable power
Check sampling Circuit
Check R822, R823, R824,R825
Change R822, R823, R824,R825
Check the R pin voltage of IC803 about 2.5V
Check R832
Check R818, D804, C807 if short
Change R818, D804, C807
Check pin2 of IC802 voltage is 3V
Check pin1 of IC802 voltage above 1.25V Change R812, R
809, R810, R 811, R815,
END
Check the C pin voltage of IC803 if 3V
Change IC803
Acer Acer –LCD-F22
54
2. No raster
Acer Acer –LCD-F22
55
3. Black screen
End
Black screen
IF BD fail
Check power supply:pin 1,2 of
CN102Power fail
NG
YES
Acer Acer –LCD-F22
56
4. Bad Screen
END
Bad Screen
IF BD fail
Change LVDS Cable
LVDS Cable Reinsert
LVDS Cable NG
Workmanship
OK
OK
OK
NG
NG
Acer Acer –LCD-F22
57
5. White screen
END
White screen
Check LVDS signal
Check VLCD is 5V
Change LVDSCable
LVDS Cable Reinsert
Workmanship
Panel Fail
LVDS cable NG
IF BD fail
OK
OK
OK OK
NG
NG
NG
NG
Acer Acer –LCD-F22
58
05 Spare parts List
INL P/N :8221F172A020R
OEM PART NO DESCRIPTION MOQ
791971300800R PCBA,I/F BOARD(EMEA,W/O),LP2230-827 ROHS 20
791971500010R PCBA,POWER KEYPAD/B,LP2230 ROHS 20
791881400700R PCBA,P/I BOARD,W/O SPK,LE22F1-727 ROHS 20
791971500000R PCBA,FUNCTION KEYPAD/B,LP2230 ROHS 20
453070801190R PWRCORD 16A/250V BLK 6FT VDE/KTL H05VV-F 20
453030300370R CABLE,DVI-D 18+1P MALE 6FT BLACK , ROHS 20
453030300371R CABLE,DVI-D 18+1P MALE 6FT BLACK 20
453010100380R CABLE,D-SUB 15P MALE 6FT BLACK/BLUE, ROH 20
430300802060R HRN ASSY, 2X4P TO 1X8P ,220mm,UL1571#28 20
430300400310R HRN ASSY, 4P,95mm,UL1571#28 20
430303001800R HRN LVDS FFC 30P 231mm W/LOCK&TASTE 20
714050018500R ASSY,BACK,COVER,W/HDMI ,W/DVI,LP2230 20
714030019700R ASSY,BEZEL,FRONT,LP2230 20
714011204500R ASSY,STAND ,LP2230 20
714020015200R ASSY,BASE, LE22F1 20
501020224400R COVER,HINGE,LP2230 20
701000010300R ASSY,CHASSIS,W/HDMI ,W/DVI,LE22F1 20
631102220370R LCP 22" LTM220M1-L01-GTB(A)(GLARE)(SAMSU 10
Acer Acer –LCD-F22
59
06 Schematics and Layouts 6.1 PI BD Layout
Acer Acer –LCD-F22
60
6.2 IF Layout (TOP)
Acer Acer –LCD-F22
61
6.3 IF Layout (BOT)
Acer Acer –LCD-F22
62
7.0 Assembly and Disassembly The tool of Assembly and disassembly : 1) Electrostatic gloves 2) Electric screwdriver: the lengthe of screwdriver top is 6±0.5cm and 15±0.5cm ;the
diameter of screwdriver top is Φ5*H5mm
Sequence Item Photo Procedures P/N D escription
S1 Place panel
(1 ).Take panel ou t of box and p lace it onthe foam .(2).Tear open the PE bag and put it inthe designated carton .(3 ).P lace panel on the foam like theattached p ictu re.Rem ark:Do not touch the lam p cord andp lace the surface of panel downsides onthe cush ion .
631102220370R
LCP 22"LTM220M1-L01-G TB(A)(G LARE)(SAM SU
S2Assem blefron t bezel
1 .Reverse the panel by 180 degree,pu tthe surface of panel upsides and insertfron t bezel in the panel.2 .Reverse the panel by 180 degree usingboth hands,pu t the surface of paneldownsides and m ake sure FFC in terfaceis closer to operator.3 .Paste tin foi
714030019700R
ASSY,BEZEL,FRONT,LP2230
S3Put chassisand powerboard
Insert powerboard in to the designatedlocation of chassis ,like the attachedP icture
701000010300R
ASSY,CHASSIS ,W /HDMI,W /DVI,LE22F1
Acer Acer –LCD-F22
63
Assembly and Disassembly (continue)
S4Insertmainboard'swire
(1).Insert FFC wire into its relevantinterface of mainboard properly likeattached picture(2).Insert the short keypad into itsrelevant interface like picture(2).Put the fixed mainboard in the rightposition.
430303001800R
HRN LVDS FFC30P 231mmW /LOCK&TASTE
S5linkpowerboard'swire
Put the mainboard into the chasssis andensure the interface wedge into therelevant position
791881400700R
PCBA,P/IBOARD,W /OSPK,LE22F1-727ROHS
S6Twist PCBAscrew
Handle electric opener and one pcs ofM3*5 screw into the right position
509146306200R
SCREW ,P,CROSS,W /W AS,M3*6,Zn-Cc1
Acer Acer –LCD-F22
64
Assembly and Disassembly (continue)
S7Twist PCBAscrew
Handle electric opener and three pcs ofM3*5 screw into the right position
509146306200R
SCREW,P,CROSS,W/WAS,M3*6,Zn-Cc
S8Twist VGAand DVI
1). Handle hexagonal screws and electricopener(2). Twist screw in the interface like theattached Picture1.
S9Twist powerboard
Handle electric opener and three pcs ofM3*6 screw into the 1and 2 position aspicture
509146306200R
SCREW,P,CROSS,W/WAS,M3*6,Zn-Cc
4
2 3
21
Acer Acer –LCD-F22
65
Assembly and Disassembly (continue)
S 1 0T w is t H D M Iin te r fa c e
1 ). H a n d le h e xa g o n a l s c re w s a n d e le c t r ico p e n e r(2 ). T w is t s c re w in th e in te rfa c e lik e th ea t ta c h e d P ic tu re 1 .
5 0 9 1 4 6 3 0 6 2 0 0R
S C R E W ,P ,C R O S S ,W /W A S ,M 3 *6 ,Z n -C c
S 1 1 In s e rt F F C w ire
1 .In s e rt F F C w ire in to th e in te rfa c e o fp a n e l2 .P u t F F C w ire in o rd e r a n d p a s te th e mo n th e p a n e l
4 3 0 3 0 3 0 0 1 8 0 0R
H R N L V D S F F C3 0 P 2 3 1 m mW /L O C K & T A S T E
S 1 2 In s e rt l ig h t w ire
1 )In s e rt 4 p c s lig h t w ire in to th e re le va n tp o s it io n2 ) p u t th e b a la n c e lig h t w ire to th ep o s it io n a s p ic tu re
S 1 3
L in k
p ow e rk e y p a d
a n d fu n c t io n
k e y p a d
1 .P u t 1 p c s lin k w ire in to th e re la t io np o s it io n o f fu n c t io n k e yp a d a s p ic tu re 12 . P u t 1 p c s lin k w ire in to th e re la t io np o s it io n o f p o w e r k e yp a d .3 .P u t 1 p c s lin k e d fu n c t io n k e yp a d a n dte a r u p th e film a s p ic tu re 2
7 9 1 8 8 1 5 0 0 0 1 0R
P C B A ,P O W E RK E Y P A D /B ,L E 2 2 F 1-7 2 7 R O H S
3
P ic tu re 1
P ic tu re 2
Acer Acer –LCD-F22
66
Assembly and Disassembly (continue)
S 1 4A ssem ble
K eypad
1 .P u t th e p ower keyp ad in to th e re la tionp os it ion o f fron t b eze l as p ic tu re 12 .P u t th e fu n c tion keyp ad in to th ere la tion p os ition o f fron t b eze l as p ic tu re 2
7 9 1 8 8 1 5 0 0 0 0 0R
P C B A ,F U N C TIO NK E Y P A D /B ,L E 2 2 F 1-7 2 7 R O H S
S 1 5 F ix ba ck cove r C h eck if b ack cover is fixed p rop erly 7 1 4 0 5 0 0 1 7 8 0 0R
A S S Y ,B A C K ,C O V ER ,W /H D M I,W /D V I,L E 2 2 F 1
S 1 6 F ix s ta nd U se 4 p cs sc rew fix s tan d on th e b ack o fassem b le like a ttach ed P ic tu re
7 1 4 0 1 1 2 0 4 2 0 0R
A S S Y ,S TA N D,L E 2 2 F 1
S 1 7 P ack ing(1 )R e lease m on ito r to th e p ack in g lin e(2 )P u t m on ito r in to carton like th eattach ed p ic tu re
5 0 6 0 2 0 0 2 5 9 0 0R
C A R TO N ,A C E RL E 2 2 F 1 ,P 2 2 4 W
3 3
22
1 1
P ic tu re 1
P ic tu re 2
2
34
1