Upload
rksampla
View
40
Download
0
Embed Size (px)
Citation preview
0
SAP AG 1999
Production Integration
Kanban Replenishment
WM Staging
Customizing Production Integration
Contents:
(C) SAP AG LO530 9-1
0.2
SAP AG 1999
Conclusion
Warehouse Management Structure 333
Master Data 444
Integration with Inventory Management 555
Goods Receipt 666 Physical Inventory 121212
Production Integration 999
Replenishment 111111
Posting Changes 88
Delivery Processing 101010
222
Goods Issue 777
Logistics Execution Overview
Course Overview 111
131313
Production Integration
Course Overview Diagram
(C) SAP AG LO530 9-2
0.3
SAP AG 1999
In your company, you replenish the productionarea from the warehouse. You need to examinedifferent possibilities for accomplishing thisreplenishment.
Production Integration: Business Scenario
(C) SAP AG LO530 9-3
0.4
SAP AG 1999
Production Integration: Topic Objectives
Describe the replenishment strategy forKANBAN within WM
Set up master data and Customizing forKANBAN processing in WM
At the conclusion of this topic, you will be able to:
(C) SAP AG LO530 9-4
0.5
SAP AG 1999
RECEIVING
902
003 002 001
200005
916
WAREHOUSE STRUCTURE
007
Storage Location 0001
KANBAN 2
KANBAN 1
Warehouse 100 - Storage Location 0100 Shipping
Scenario for KANBAN Replenishment
901 150
In this example, KANBANs are managed in their own storage location that is not WM-relevant. The KANBAN storage location must be different from the WM storage location from which the replenishment materials are taken.
(C) SAP AG LO530 9-5
0.6
SAP AG 1999
KANBAN-Card
SupplyDemand
Material
fullfull
emptyempty
fullfull
fullfull
KANBAN
With KANBAN, the material flow is organized by containers that are located at the work centers. They contain the amount of material that the workers need at their work center for a certain period of time. If the container is emptied by the demand, KANBAN replenishment is triggered. Supply source for the requested material can be another production unit, the warehouse, or a vendor. Since the container arrives at the work center, the worker can help himself from further containers.
The goal is that production controls the production process itself and the effort for the worker in production is reduced. Stocks and lead times can be reduced by the self controlling and replenishment created close to actual requests (replenishment is started when the material is needed).
Material is staged in production where it is needed. It is available in small buffers; material staging doesn‘t have to be planned. Instead, material is replaced very soon by KANBAN.
As of release 4.5A, Warehouse Management (WM) is interfaced to the SAP Production Planning (PP) application component to replenish kanban stock to production supply areas. Prior to Release 4.5A, replenishment from a WM warehouse could only take place as a stock transfer between two storage locations. This stock transfer had to be started in Inventory Management. With the new process you can initiate replenishment directly from within WM.
(C) SAP AG LO530 9-6
0.7
SAP AG 1999
fullfull
EmptyEmpty
Set KANBAN toSet KANBAN to empty and empty andcreatecreate a Transfer a Transfer
RequirementRequirement in WM in WM
Confirmation ofthe TO sets
KANBAN to fulland posts stock
transfer toKANBAN
storage location
Automatic ormanual creationof a TransferOrder in WM
Warehouse
KANBAN Replenishment Strategy with WM
To provide KANBAN replenishment from a WM warehouse to production, you need to carry out the following steps:1. Request the KANBAN replenishment either manually using the PP system or by scanning a bar code. Set the container to “empty”. The system records the request in the form of a transfer requirement (TR). The WM transfer requirement number appears in the KANBAN itself. From the KANBAN information window, you can display the corresponding transfer requirement from within the WM system.
2. Process the transfer requirement (TR) like any normal TR in WM by creating a transfer order (TO) for it.
3. Confirm the transfer order. Once you confirm the TO, the system updates the KANBAN in PP by setting the status to "full". As an alternative to confirming the TO, the confirmation of the replenishment can take place in the KANBAN. If you set the status of the KANBAN to "full", the system confirms the corresponding TO automatically.
4. After the replenishment has been processed in WM, a stock transfer results between the WM storage location and the KANBAN storage location. The system can process this stock transfer automatically when the TO is confirmed or you can process it manually by selecting PostChange Inventory management Stor.loc. to stor.loc. from the WM menu bar.
(C) SAP AG LO530 9-7
0.8
SAP AG 1999
Define KANBAN Storage location (must bedifferent from WM storage location)
Define the replenishment strategy
Specify the replenishment strategy andreplenishment storage location in the
KANBAN control cycle
Set up replenishment movement type
Set up storage location control
Setup of KANBAN Replenishment
To activate KANBAN in WM, you need to take the following into consideration in the KANBAN control cycle:
KANBAN replenishment must be defined using its own KANBAN storage location that must be different from the WM storage location.
Change system parameters in customizing: You define the strategy for the KANBAN replenishment under Production KANBAN Replenishment strategies Define stock transfer strategies in the SAP Implementation Guide. Set the control type for the stock transfer stratgies to Transfer reqmts from a storage location controlled by WM.
You need to specify this replenishment strategy which is specifically defined for KANBAN replenishment.
For the replenishment storage location, you need to enter a WM-relevant storage location. This way, the system knows that it is dealing with a WM-relevant replenishment. In addition to the storage location, you need to enter the WM data to include the warehouse number, storage type as a KANBAN interface (storage type 150 in the standard system) and the storage bin..
Set up the appropriate replenishment movement type for KANBAN in WM (standard is movement type 350).
Setup the storage location control for manual posting chnages or for automatic processing.
(C) SAP AG LO530 9-8
0.9
SAP AG 1999
At the conclusion of this topic, you will be able to:
Describe the replenishment strategy forWM Staging
Set up master data and Customizing forprocessing WM Staging
Production Integration: Topic Objectives
(C) SAP AG LO530 9-9
0.10
SAP AG 1999
RECEIVING
902 003 002
0xx
001
005
916
PRODUCTION LINES -->
WAREHOUSE STRUCTURE
100100 901901
ShippingWarehouse 100 Storage Location 0100
Scenario for WM Staging
In this example, the Production Area is managed within a WM-relevant Storage Location.
(C) SAP AG LO530 9-10
0.11
SAP AG 1999
Backflush Components
Goods Receipt for Finished Assembly
ProductionPlanning
WarehouseManagement
Inventory Management
Create Production Order
Release Production Order
Stage Components
Confirm Production Order
Transfer Requirement
Transfer Order
Confirm TO
Transfer Requirement
Transfer Order
Confirm TO
Production Order Process Review
The production order process has many steps from the creation of the production order through the putaway of the finished assembly or sub-assembly. Typically, many people are involved in the process. It is possible to automate several of these steps. It is important that the company’s business process is understood so that the appropriate steps are automated.
(C) SAP AG LO530 9-11
0.12
SAP AG 1999
Production Supply Area
Production Supply Area
Work Center Master Storage Location
Work Center A1
WorkCenter B3
PSA = WM001
Production supply areas (PSAs) are used for material replenishment and are situated directly on the shop floor in the production department. The PSA groups work centers near production storage bins based on the material staging methods.
The PSA is defined for the storage location and assigned in the work center master data.
(C) SAP AG LO530 9-12
0.13
SAP AG 1999
Control Data:Control Data:
Number of KANBANsNumber of KANBANsKanban QuantityKanban Quantity
Supply Area
Plant
Material
Destination Data:Destination Data:
Warehouse NumberWarehouse NumberStorage TypeStorage TypeStorage BinStorage BinStaging IndicatorStaging IndicatorStoring PositionStoring Position
Control Cycle
The control cycle record is made up of the plant, production supply area and material and determines for the WM-PP interface the production storage bin and the type of material staging that is used. The production storage bin is defined by the whole key: warehouse number, storage type and bin.
You can also define a control cycle without specifying the material. This general entry is valid for all materials in the supply area for which no control cycle has been defined.
The control cycle establishes how and to where a material is to be supplied within a production supply area.
(C) SAP AG LO530 9-13
0.14
SAP AG 1999
Material Staging Indicators
Crate Parts
Release Order Parts
Pick Parts
ProductionOrder
Manual Staging
Pick parts are provided in the quantities requested as specified in the production order. These parts can be provided in a physical storage bin or in the dynamic storage bin for the Production Order. For this type of material staging, transfer requirements can be created:
automatically when the production order is released
manually.
Crate parts are ordered manually when a crate is almost empty.
For Release Order parts, the transfer quantity is calculated based on the planned quantities of components of selected, released orders. The stock situation in the production area and the replenishment storage types are included in this calculation.
Set the indicator to Manual Staging if you want to handle the process manually.
(C) SAP AG LO530 9-14
0.15
SAP AG 1999
A separate storage bin forproduction supply isdefined for each materialand control cycle.
You can define thedynamic storage bin“PRODUCTION ORDER” in the control cycle forpick parts.
PO 6000378A
B
PR Bin-1001
Production Storage Bins
For production supply, you can define a storage bin as a physical or dynamic location.
Production storage bins that are used for material staging are determined based on the control cycle.
(C) SAP AG LO530 9-15
0.16
SAP AG 1999
Production Order
TransferRequirement
TransferOrder
MaterialsStaged
Components
Material Supply
Planning functionThe transfer requirement (TR) does not block materials, but notifies warehouse management that a particular material is needed on a certain date in a specified quantity at a specified production storage bin.
Request for Material Staging
Production workers request the needed materials with a transfer requirement. The TR can be created from within the Production Order function (Goto > WM Picklist or Functions > WM Material Staging > Proceed ) or from within Logistics Execution (Outbound Process > Goods Issue for Other Transactions > Prepare Production Supply > For Production Order/Crate Part/Release Order Part).
Warehousing personnel transfer the material based on a transfer order created from the TR.
The availability check in the production order ensures the availability of materials at the storage area level.
You can control automatic transfer order creation within the Production Scheduling Profile in Customizing.
(C) SAP AG LO530 9-16
0.17
SAP AG 1999
TRANSFERORDER
Mat: 4711600 lbsFrom: 00101-01-01To: 10001/01
TRANSFERREQUIREMENT
Mat: 4711 900 lbs
To: 100 01/01
01/01
4711 / 300 lbs
-
You can only decreasethe quantity for pickparts.
When you create a TO,the available quantity iscalculated and the TOquantity is optionallydecreased by the sameamount.
Examples:
- minimum use
- material change
- workstation change
- previous overdelivery
Decreasing the Quantity during TO Creation
The unrestricted available quantity can be established dynamically.
This later point in time allows more current information than if it were determined at the time of the request for materials.
In the Production Scheduler Profile, you can set the indicator “Confirmed Quantity for TR Creation”. Setting this indicator will cause the TR to be created for the confirmed quantity instead of the requirement quantity of the component.
(C) SAP AG LO530 9-17
0.18
SAP AG 1999
Storage
TRANSFERORDER
Material: 4711 600 lbs
From: 001 01-01-01
To: 811 01/01
4711 / 300 lbs
4711 / 300 lbs
WP 1
01/01
Supply to Production Storage Bins
A transfer order is created based upon the transfer requirement.
The transfer order:
determines the source bin based upon the strategy used to select the needed material
is the actual instruction for the physical stock transfer
moves the quantities in the system
determines whether the quantity will be decreased (optional).
After the TO is confirmed, the material becomes available at the destination bin.
(C) SAP AG LO530 9-18
0.19
SAP AG 1999
03/0101/01
4711 / 300 klgs
4711 / 300 lbs
05/01
PSA1PSA2 PSA3
WS 3 WS 4
WS 5
WS 1 WS 2
WS 6
Usage posting
The final step in the material staging process is to post a goods issue for consumption. When a production order is completed, the materials have been removed from the production storage bins in the warehouse and the final product has been fully assembled, it is still necessary to balance the stock quantities in the IM and WM systems.
You post the use of materials to the database either by "backflushing" with the completion confirmation or directly in the IM system. This posting is necessary to reduce the stock quantities in the production storage bins of the WM and IM systems.
Since the transfer requirement for the production order was created far in advance of this goods issue posting, the materials are delivered in a timely manner to the production storage bins. You post the actual goods issue in the IM system (or in the PP system) after the product has been assembled in production.
Since the production storage bin was noted in the production order when it was released, the material usage posting reduces the quantity in the production bins (in the system) and no further action is required in the WM system.
(C) SAP AG LO530 9-19
0.20
SAP AG 1999
System Definition
Warehouse ManagementCustomizing
Define a ProductionStorage Type
Create the Production Supply Area
Activate the PP Switch
Define the Control Cycle Records
Create the ProductionStorage Bins
Assign Movement Type to the Production Storage Type
Define a Movement Type
Customize the ProductionProfile (Optionally)
The physical production bins are defined in the Warehouse Management system.
If all materials are staged as pick parts to a collective storage bin or dynamic coordinates are used, generally, only one material-independent control cycle per production supply area is sufficient.
(C) SAP AG LO530 9-20
0.21
SAP AG 1999
Distinctive Features for Repetitive Orders
No defined release time. The request is made from
the removal list.
The usage posting is basedon the release of the current
bill of materials.
There are no dynamic coordinates.
The high flexibility of the processes necessary to pick materials directly for serial orders requires extremely complex organization.
The timing of material supply should be organized as follows:
Early enough to carry out the physical supply using the WM system on time
Late enough to avoid charges that are relevant to material supply (location, material, etc.)
Especially when many changes must be made, it is recommended that you use “crate parts” as a material staging type.
(C) SAP AG LO530 9-21
0.22
SAP AG 1999
Standard Reports
List of Control Cycles
Analysis of ProductionOrders
WM-PP Evaluation Report(Storage Bin Selection)
Material Stock at Production Storage Bin
Evaluation of the Production Storage Bins per Storage Type:
List of Control Cycles (RLLS4100): Provides a list of control cycles assigned to your warehouse based on your selection criteria.
Material Stock at Production Storage Bin (RLWMPPC1): Overview of quantity situation in Production Storage Bins.
WM-PP Evaluation Report (RLWMPPC3): This report provides an overview of the production storage bins. A traffic light icon displays the status of the respective storage bins depending on the stock situation. This makes it possible to identify critical situations more quickly. More detailed information is available in the report documentation.
Analysis of Production Orders (RLWMPPC4): This report evaluates PP orders from the WM view. A traffic light icon displays critical situations that result from discrepancies between reservations and the corresponding transfer requirements. More detailed information is available in the report documentation.
(C) SAP AG LO530 9-22
0.23
SAP AG 1999
Production Integration: Summary
Describe the replenishment strategy forKANBAN within WM
Set up master data and Customizing forKANBAN processing in WM
Describe the replenishment strategy forWM Staging
Set up master data and Customizing forprocessing WM Staging
You are now able to:
(C) SAP AG LO530 9-23
0.24Production Integration - Exercises 1
Unit: Production Integration
Topic: Kanban (Optional Exercise)
At the conclusion of this exercise, you will be able to:
Set up master data and customizing for KANBAN
In one area of your company, you are running a separate storage location using KANBAN as your method of resupply to production. You need to configure the system so that materials can be supplied from your warehouse to the production area using KANBAN methodology.
In this exercise, you will configure the system and create the master data required for utilizing the KANBAN functionality. This exercise covers the full circle of events required for managing the entire production process.
Keep in mind that the steps in this exercise are not necessarily all performed by warehouse personnel, but are generally performed by a combination of production, planning and warehouse personnel. As you work through the exercise, consider which personnel in your company might perform each task.
1-1 First you must define the control between Production and the Warehouse. In Production Customizing, verify the Stock Transfer Strategy.
1-1-1 In the Stock Transfer Strategy, verify that for plant 1200, strategy 0006 is configured as Stock Transfer with transfer requirement. The TO should be automatically created and no difference indicator is set. Be sure that From Different Plant movement is indicated.
1-1-2 The Storage Type for Kanban for your warehouse has been defined as 150. In WM Customizing under Interfaces Define KANBAN, you must verify the assignment of WM movement type 350 to storage type 150 in your warehouse.
1-1-3 Verify the Storage Location Control from your warehouse to Plant 1200 Storage Location PL06. What movement type will be run in the background at the time of the TO Confirmation? ________________
1-2 Create the master data.
1-2-1 Create material K-1## to use for the KANBAN test by copying the material R-1270C. You need to create this material for both Plant 1200, Sloc PL06 and for Plant 1000, Warehouse 1##. The Industry Sector is M, and the Material Type is Raw Material.
(C) SAP AG LO530 9-24
Plant 1200, create the Basic Data, Purchasing, General Plant Data/Storage 1 and 2, and Accounting views with reference to R-1270C, Plant 1200, Storage Location PL06.
In Plant 1000, Storage Location 01##, create Purchasing, General Plant Data/Storage 1 and 2, Warehouse Management 1 & 2 and the Accounting 1 view with reference to R-1270C, Plant 1200, Storage Location PL06. In the Warehouse Management 2 View, set the pallet size to 80 pieces on an Industrial pallet.
1-2-2 Create a Bin KANBAN in Storage Type 150, Storage Section 001.
(C) SAP AG LO530 9-25
1-2-3 Create a Control Cycle Record in PP for this new material K-1##, Plant 1200 and Supply Area PVB_PC. Choose the Classic KANBAN and copy from R-1270C, Plant 1200 and Supply Area PVB_PC. In the Stock Transfer tab of the control cycle record, establish the Issuing Plant as 1000, Storage Location 01##, use your warehouse number 1##, Storage Type 150 and Storage Bin KANBAN.
1-2-4 Do a goods receipt without reference to bring in 800 pieces of the K-1## material into Plant 1000, Storage Location 01##. Create a Transfer Order with reference to the Transfer Requirement that is created by the 501 transaction, and remember to confirm the Transfer Order.
1-3 Test the connection
1-3-1 Call the Kanban Board Demand Source View and for Plant 1200 and supply area PVB_PC.
1-3-2 Choose one of the boxes that represent the KANBAN and set it to empty. Is a TR created? Select the box to see the TR that is created.
1-3-3 Set status to Full.
1-3-4 Display the stock overview from Inventory Management for the K-1## so you can see inventory for Plants 1000 and 1200.
Plant Storage Location Unrestricted Use Stock
1000
1200
Be sure to leave the plant field blank so you can overview the inventory balances for both plants.
(C) SAP AG LO530 9-26
0.25Production Integration - Solutions 1
Unit: Production Integration
Topic: Kanban
1-1
1-1-1 Tools AcceleratedSAP Customizing Edit Project Goto SAP Reference IMG Production Kanban Replenishment Strategies Define Stock Transfer Strategies. Select Plant 1200, Replenishment Strategy 0006. Select From diff plnt and verify Immed TO Crtn is selected.
1-1-2 SAP Reference IMG Logistics Execution Warehouse Management Interfaces Define Kanban Movement Type Assignment to Kanban Supply. Position on your warehouse and storage type 150.
1-1-3 SAP Reference IMG Logistics Execution Warehouse Management Interfaces Define Kanban Storage Location Control in Warehouse Mgmt. The movement type 301 (Plant to Plant) is the movement type that will be executed upon TO Confirmation.
1-2
1-2-1 Logistics Logistics Execution Master Data Material Material Create Immediately
Field Name or Data Type Values
Material K-1##
Industry Sector Mechanical Engineering
Material Type Raw material
Copy From R-1270C
Select Views Basic Data, Purchasing, General Plant 1 and 2, Accounting 1
Plant 1200
Storage Location PL06
Copy from Plant 1200
Copy from Storage Location PL06
(C) SAP AG LO530 9-27
Create the material a second time with the following data:
Field Name or Data Type
Values
Material K-1##
Industry Sector Mechanical Engineering
Material Type Raw material
Copy From R-1270C
Select Views Purchasing, General Plant 1 and 2, Warehouse Management 1 and 2, Accounting 1
Plant 1000
Storage Location 01##
Warehouse 1##
Copy from Plant 1200
Copy from Storage Location PL06
Warehouse Management 2 View:
Field Name or Data Type Values
LE Quantity 80
UN PC
SUT IP
1-2-2 Logistics Logistics Execution Master Data Warehouse Storage Bin Create Manually
Field Name or Data Type Values
Warehouse 1##
Storage Type 150
Storage Bin KANBAN
Storage Section 001
(C) SAP AG LO530 9-28
1-2-3 Logistics Production KANBAN Control Cycle Create
Field Name or Data Type Values
Material K-1##
Plant 1200
Supply Area PVB_PC
Classic KANBAN Select
Copy from Material R-1270C
Plant 1200
Supply Area PVB_PC
Select the Stock Transfer Tab:
Field Name or Data Type Values
Issuing Plant 1000
Storage Location 01##
Warehouse Number 1##
Storage Type 150
Storage Bin KANBAN
1-2-4 Logistics Logistics Execution Inbound Process Goods Receipt for Purchase Order, Order, Other Goods Receipt for Other Activities
Field Name or Data Type Values
Movement Type 501
Plant 1000
Storage Location 01##
Material Number K-1##
Quantity 800
Still under Inbound Process, select Putaway Create Transfer Order By Material Document. Generate the TO in the background. Save. Choose Transfer Order Confirm Input List. Save.
(C) SAP AG LO530 9-29
1-3
1-3-1 Logistics Production KANBAN Control Kanban Board Demand Source View
Field Name or Data Type Values
Plant 1200
Supply Area PVB_PC
1-3-2 Logistics Logistics Execution Internal Whse Processes Bins and Stock Display Total Stock per Material (Inventory Management)
(C) SAP AG LO530 9-30
0.26Production Integration - Exercises 2
Unit: Production Integration
Topic: Setting Up Production
At the conclusion of this exercise, you will be able to:
Set up master data and customizing for WM Staging.
In your company, you have materials that are supplied to the production line in three different ways. First, you have crate materials that are supplied to the line based on container quantities. When one container becomes empty, that container is refilled and returned to the line based on a visual cue. These parts are typically parts that are common to multiple assemblies and are often large, bulky materials.
Second, you have materials that are picked specifically for a production order, depending on the product that you are building. These parts are typically more specialized, and may be high dollar inventory items that are supplied to the line only when you are building a particular product.
Third, you have materials that are supplied to the line for several production orders at a time. These are typically floor stock type items like nuts, bolts and screws, where you want to have 3-6 months of inventory available on the production floor.
In this exercise, you will define the process for production orders such that all three material staging types are utilized. Engineering has designed a new flywheel for an existing pump. It is your responsibility to set up the production line for this new material so that the new, revised pump can be manufactured on your existing production line. You want to set this material up to be stored at point of use on the production floor and replenished based on a visual cue.
You will verify the supply area, create a control cycle for the new material, enter a production order for the new pump, stage all the required materials, complete the production order and stock the finished assembly. This exercise covers the full circle of events required for managing the entire production process.
Keep in mind that the steps in this exercise are not necessarily all performed by warehouse personnel, but are generally performed by a combination of production, planning and warehouse personnel. As you work through the exercise, think about which personnel in your company might perform each task.
(C) SAP AG LO530 9-31
PART ONE:
2-1 In Part One of this exercise, you will set up the production supply process, verifying the configuration and creating or changing the necessary master data.
2-1-1 Look at the Production Supply Area PVB 1310## in the Warehouse Master Data.
Which Storage Location is assigned to your supply area? _______
2-1-2 The production supply area is linked in Production Planning to the Work Center. Go to the work center T-WM## Basic Data view and verify that the correct supply area is assigned.
2-1-3 Use Field Level help to determine where in R/3, other than WM, is the Supply Area Used? _______________________________________
2-1-4 Display the Control Cycle and verify the following:
In order to have pick parts staged by production order, there must be one material-independent control cycle. Does this control cycle exist? _____
For this material-independent control cycle, to which bin will the materials be delivered ? _________________
2-1-5 There is a release order part T-BW07-## in your process. Verify the control cycle for this material. What is the staging indicator for this control cycle record? __________________
2-1-6 The new flywheel, T-BW01-##, is a crate part and is delivered to the production line based on a visual cue. There are 2 Containers, each holding 20 flywheels. The container is stored on the production floor in storage type 100 in a bin labeled PROD-1310. When one container becomes empty, it is replenished from the warehouse. Based on this information, create a control cycle record for this flywheel.
Field Name or Data Type Values
No. of Kanbans
Kanban Quantity
Warehouse Number
Storage Type
Storage Bin
Staging Indicator
Why can’t you use a dynamic bin for a crate part? ________________
_________________________________________________________
(C) SAP AG LO530 9-32
2-1-7 For this control cycle, you must request the first lot of materials to be delivered to the floor. Perform WM Staging on the crate part to create a Transfer Requirement in the warehouse. (Note: Typically, this task is performed by either a production worker or a material handler in production when the materials need to be refilled. Since this is a new control cycle, this first request is to get the process started.) Create the TR, but do not process it yet.
Transfer Requirement _____________
PART TWO:
3-1 Changing responsibilities, you now represent the Production Planner in your company. Engineering has determined that you are ready to build the pump with the new flywheel. You need to create and release a production order, and have the materials moved from the warehouse to support production.
3-1-1 Using the data provided below, create, release and stage a production order.
Which materials are selected for staging? __________________________________________________
Why aren’t the rest of the materials selected for staging? ______________
____________________________________________________________
Production Order
Order Type: PP01
Production Plant: 1000
Material Quantity Delivery Date
T-MS-## 10 One week from Today
Production Order Number: _______________________
(C) SAP AG LO530 9-33
(C) SAP AG LO530 9-34
4-1 Back in the warehouse, there are requirements to be processed from the warehouse to the production floor.
4-1-1 Display the Transfer Requirements that have been created by the WM Staging. What requirement type should you use to display production requirements? ______
Leave the Requirement Number blank so you see all requirements for production.
4-1-2 Process the TRs by converting them to Transfer Orders.
TO Numbers ________ __________
4-1-3 Confirm the Transfer Orders.
4-1-4 Look at the Stock Overview for materials T-BW01-## (Flywheel – Crate Part); T-BW03-## (Shaft – Pick Part); and T-MS-## (Finished Pump).
Material StorType Available For Putaway Pick Quantity
T-BW01-##
T-BW03-##
T-MS-##
5-1 Confirming the Production Order confirms that the work has been completed and signals that you have consumed the materials from the production floor. It is possible to have the system complete the finished assembly at this point, delivering the finished pump to the warehouse for put away into stock. In our test system, the confirmation of the Production Order will consume all of the materials required to build the assembly and perform the receipt of the finished assembly into stock.
5-1-1 In PP, perform the Completion Confirmation.
How many goods issues were processed? _______ Failed? ________
5-1-2 Recheck your stock for the materials T-BW01-##, T-BW03-## and T-MS-##.
Material StorType Available For Putaway Pick Quantity
T-BW01-##
T-BW03-##
T-MS-##
(C) SAP AG LO530 9-35
6-1 The Production Order accomplished two functions: consumed the components and received the finished pump into the warehouse. Now you must process the finished pump to the fixed bin in the warehouse.
6-1-1 Process the finished pump to its final destination bin. Which storage type/bin is suggested by the TO you created? ________________________
Where does the system get that information? ________________________
6-1-2 Confirm the TO.
6-1-3 Check stock on the T-MS-##.
Material StorType Available For Putaway Pick Quantity
T-MS-##
(C) SAP AG LO530 9-36
0.27Production Integration - Solutions 2
Unit: Production Integration
Topic: Setting up Production
2-1
2-1-1 Logistics Logistics Execution Master Data Warehouse Production Supply Production Supply Area Display. Enter Plant 1000. Select the line for PVB 1310##, and choose Details. Your storage location 01## is assigned to your supply area.
2-1-2 Logistics Production Master Data Work Centers Work Center Display. Enter Plant 1000 and Work Center T-WM## and choose Basic Data.
2-1-3 Position on the field: Supply Area and Choose F1. The Supply Area is used in Kanban and in Warehouse Management.
2-1-4 Logistics Logistics Execution Master Data Warehouse Production Supply Control Cycle Production Supply Display.
Field Name or Data Type Values
Material Blank
Plant 1000
Supply Area PVB 1310##
Yes, there is a control cycle record that is material-independent for pick parts. Materials will be delivered to Storage Type 100 and will be stored in a Dynamic Bin.
2-1-5 Logistics Logistics Execution Master Data Warehouse Production Supply Control Cycle Production Supply Display.
Field Name or Data Type Values
Material T-BW07-##
Plant 1000
Supply Area PVB 1310##
The Staging Indicator for the control cycle for T-BW07-## is 3.
2-1-6 Logistics Logistics Execution Master Data Warehouse Production Supply Control Cycle Production Supply Create.
(C) SAP AG LO530 9-37
Field Name or Data Type Values
Material T-BW01-##
Plant 1000
Supply Area PVB 1310##
No. of Kanbans 2
Kanban Quantity 20
Warehouse Number 1##
Storage Type 100
Storage Bin PROD-1310
Staging Indicator 2
You can’t use a dynamic bin for a Crate Part because Crate Parts are delivered to the production area without regard to the production order number.
2-1-7 Logistics Logistics Execution Outbound Process Goods Issue for Other Transactions Prepare Production Supply For Crate Part. Enter the material T-BW01-## and select WM Material Staging. Select WM Material Staging again to create the TR and Save. Select Logistics Logistics Execution Internal Whse Processes Transfer Requirement Display By Requirement. Use Requirement Type P and enter to see the Transfer Requirement that was created by the WM Staging Process. (Do not process it yet.)
PART TWO:
3-1
3-1-1 Logistics Production Production Control Order Create With Material.
Field Name or Data Type Values
Material T-MS-##
Production Plant 1000
Order Type PP01
Total quantity 10
Finish One week from today
Functions Release. Goto WM PickList Proceed. Select WM Material Staging. Save the order. The pick parts are selected for staging. The other materials are crate or release order parts and are not relevant for staging here.
4-1
(C) SAP AG LO530 9-38
4-1-1 Logistics Logistics Execution Internal Whse Processes Transfer Requirement Display By Requirement. Use Requirement Type P and enter. You should see two TRs available for processing.
4-1-2 Select the TRs from the list display above and choose TO in Background.
4-1-3 Favorites Confirm TO, One Step
4-1-4 Favorites Warehouse Management Stock Overview
5-1
5-1-1 Logistics Production Production Control Confirmation Enter For Order. Enter the Production Order Number. Select Final Confirmation and save. If your setup is correct, you should have 8 transactions processed; 0 failed.
5-1-2 Favorites Warehouse Management Stock Overview
6-1
6-1-1 Favorites Display TR by Storage Type. Select the TR and convert it into a TO. The system should select your fixed bin Box-## as the final destination because that is what you have identified in the Material Master at the storage type level.
6-1-2 Favorites Confirm TO, One Step
6-1-3 Favorites Warehouse Management Stock Overview
(C) SAP AG LO530 9-39