1. Wear Safety Equipment.2. Keep hands and feet clear.3. Beware of flying objects.

Prior to removing any pins or parts refer to Manufacturers Service manual for proper procedures for securing and stabilizing equipment.

MACHINE MODELS BOBCAT 442 CASE CX75SR, CX80 CAT 307C, 308C CR DEERE 80C HITACHI Zaxis 80, ZX75US JCB JZ70 KOBELCO SK70SR, 80CS KOMATSU PC60-7B, PC75R-2, PC78US-6 LINK-BELT 75SA

10

1

5 2

4 3

6

7

8

9

11

123456789

10

11

Bucket TeethBucket to Linkage PinBucket to Stick PinStick Linkage PinBucket Cylinder Rod End to LinkageBucket Cylinder PinStick Cylinder Rod End PinStick to Boom PinCylinder Pin to StickA. Boom to Frame (insert ONLY)B. Boom Cylinder Rod EndTrack Master Pin (Slip Pin)

See back for Pin Removal / Insertion specifications and recommended Slide Sledge® tool kit.

Excavator 7 Ton Class Application ChartOperating Weight: 15,000 - 17,000 lb.

10 A

B

The following removal and insertion tips are manufacturer recommendations for this model. Other model excavators may use similar tips and tools for similar removals. Consult with manufacturer for specific models and uses.

Removal and installation should only be performed on pins that have been properly serviced and maintained.

Tool/Tip Description#1

#2

#3

#4

#5

#6

#7

#8

#9

#10

#11

R/I ToolR/I TipR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipR/I ToolR/I TipAccessory

9 lb./30" Slide Sledge1/2" Bucket Tooth Remover1/2" Bucket Tooth Inserter9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver 9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge1 1/4" Pin Driver9 lb./30" Slide Sledge7/8" Pin Driver5 lb. Handle Weight

Item

Recommended Tool Kit for 7 Ton Class ExcavatorsProduct Part#9 lb./36" Slide Sledge7/8" Pin Driver

250502522525290252802527025325

1001001

1 1/4" Pin Driver1/2" Bucket Tooth Remover1/2" Bucket Tooth InserterUtility Wedge5 lb. Add On Weight

Part#2505025280252702505025290250502529025050252902505025290250502529025050252902505025290250502529025050252902505025225

1001001

Excavator 7 Ton Class Application ChartOperating Weight: 15,000 - 17,000 lb.