Excalibur High-Speed Low-Power Precision …vakits.com/sites/default/files/tle2021.pdfusing a new texas instruments ... excalibur high-speed low-power precision operational ... excalibur

TLE202x, TLE202xA, TLE202xB, TLE202xYEXCALIBUR HIGH-SPEED LOW-POWER PRECISION

OPERATIONAL AMPLIFIERSSLOS191B – FEBRUARY 1997 – REVISED JANUARY 2002

1POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

Supply Current . . . 300 µA Max

High Unity-Gain Bandwidth . . . 2 MHz Typ

High Slew Rate . . . 0.45 V/µs Min

Supply-Current Change Over Military TempRange . . . 10 µA Typ at VCC ± = ± 15 V

Specified for Both 5-V Single-Supply and±15-V Operation

Phase-Reversal Protection

High Open-Loop Gain . . . 6.5 V/µV(136 dB) Typ

Low Offset Voltage . . . 100 µV Max

Offset Voltage Drift With Time0.005 µV/mo Typ

Low Input Bias Current . . . 50 nA Max

Low Noise Voltage . . . 19 nV/√Hz Typ

description

The TLE202x, TLE202xA, and TLE202xB devices are precision, high-speed, low-power operational amplifiersusing a new Texas Instruments Excalibur process. These devices combine the best features of the OP21 withhighly improved slew rate and unity-gain bandwidth.

The complementary bipolar Excalibur process utilizes isolated vertical pnp transistors that yield dramaticimprovement in unity-gain bandwidth and slew rate over similar devices.

The addition of a bias circuit in conjunction with this process results in extremely stable parameters with bothtime and temperature. This means that a precision device remains a precision device even with changes intemperature and over years of use.

This combination of excellent dc performance with a common-mode input voltage range that includes thenegative rail makes these devices the ideal choice for low-level signal conditioning applications in eithersingle-supply or split-supply configurations. In addition, these devices offer phase-reversal protection circuitrythat eliminates an unexpected change in output states when one of the inputs goes below the negative supplyrail.

A variety of available options includes small-outline and chip-carrier versions for high-density systemsapplications.

The C-suffix devices are characterized for operation from 0°C to 70°C. The I-suffix devices are characterizedfor operation from –40°C to 85°C. The M-suffix devices are characterized for operation over the full militarytemperature range of –55°C to 125°C.

Copyright 2002, Texas Instruments IncorporatedPRODUCTION DATA information is current as of publication date.Products conform to specifications per the terms of Texas Instrumentsstandard warranty. Production processing does not necessarily includetesting of all parameters.

Please be aware that an important notice concerning availability, standard warranty, and use in critical applications ofTexas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.

TLE202x, TLE202xA, TLE202xB, TLE202xYEXCALIBUR HIGH-SPEED LOW-POWER PRECISIONOPERATIONAL AMPLIFIERSSLOS191B – FEBRUARY 1997 – REVISED JANUARY 2002

2 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265

TLE2021 AVAILABLE OPTIONS

PACKAGED DEVICESCHIP

TAVIOmaxAT 25°C

SMALLOUTLINE†

(D)

SSOP‡(DB)

CHIPCARRIER

(FK)

CERAMIC DIP(JG)

PLASTIC DIP(P)

TSSOP‡

(PW)

CHIPFORM§

(Y)

0°C to 200 µV TLE2021ACDTLE2021CDBLE

TLE2021ACP — —70°C

µ500 µV TLE2021CD

TLE2021CDBLE — —TLE2021CP TLE2021CPWLE TLE2021Y

–40°Cto

200 µV TLE2021AID TLE2021AIPto85°C

µ500 µV TLE2021ID

— — — TLE2021AIPTLE2021IP

— —

–55°C 100 µV — TLE2021BMFK TLE2021BMJG —to

µ200 µV TLE2021AMD — TLE2021AMFK TLE2021AMJG TLE2021AMP — —

125°C 500 µV TLE2021MD TLE2021MFK TLE2021MJG TLE2021MP

† The D packages are available taped and reeled. To order a taped and reeled part, add the suffix R (e.g., TLE2021CDR).‡ The DB and PW packages are only available left-end taped and reeled.§ Chip forms are tested at 25°C only.



TAVIOmaxAT 25°C

SMALLOUTLINE†

(D)

SSOP‡(DB)

CHIPCARRIER

(FK)

CERAMICDIP(JG)

PLASTICDIP(P)

TSSOP‡

(PW)

CHIPFORM§

(Y)

0°Cto

150 µV300 µV

TLE2022BCDTLE2022ACD

— —TLE2022ACP

——

——to

70°C300 µV500 µV

TLE2022ACDTLE2022CD

—TLE2022CDBLE

— — TLE2022ACPTLE2022CP

—

TLE2022CPWLE

—

TLE2022Y

–40°Cto

150 µV300 µV

TLE2022BIDTLE2022AID

—TLE2022AIPto

85°C300 µV500 µV

TLE2022AIDTLE2022ID

— — — TLE2022AIPTLE2022IP

— —

–55°C 150 µV — — TLE2022BMJG —55 Cto

150 µV300 µV TLE2022AMD — TLE2022AMFK

TLE2022BMJGTLE2022AMJG TLE2022AMP — —

125°Cµ

500 µV TLE2022MD TLE2022MFK TLE2022MJG TLE2022MP† The D packages are available taped and reeled. To order a taped and reeled part, add the suffix R (e.g., TLE2022CDR).‡ The DB and PW packages are only available left-end taped and reeled.§ Chip forms are tested at 25°C only.



TAVIOmaxAT 25°C

SMALLOUTLINE

(DW)

CHIPCARRIER

(FK)

CERAMICDIP(J)

PLASTICDIP(N)

CHIPFORM§

(Y)

500 µV TLE2024BCDW TLE2024BCN —0°C to 70°C

500 µV750 µV

TLE2024BCDWTLE2024ACDW — —

TLE2024BCNTLE2024ACN —µ

1000 µV TLE2024CDW TLE2024CN TLE2024Y

500 µV TLE2024BIDW TLE2024BIN–40°C to 85°C

500 µV750 µV

TLE2024BIDWTLE2024AIDW — —

TLE2024BINTLE2024AIN —µ

1000 µV TLE2024IDW TLE2024IN

500 µV TLE2024BMDW TLE2024BMFK TLE2024BMJ TLE2024BMN–55°C to 125°C

µ750 µV TLE2024AMDW TLE2024AMFK TLE2024AMJ TLE2024AMN —

1000 µV TLE2024MDW TLE2024MFK TLE2024MJ TLE2024MN

§ Chip forms are tested at 25°C only.




1

2

3

4

8

7

6

5

OFFSET N1IN–IN+

VCC – /GND

NCVCC+OUTOFFSET N2

NC – No internal connection

3 2 1 20 19

9 10 11 12 13

4

5

6

7

8

18

17

16

15

14

NCVCC+NCOUTNC

NCIN–NCIN+NC

TLE2021FK PACKAGE(TOP VIEW)

NC

OF

FS

ET

N1

NC

NC

NC

NC

GN

DN

CO

FF

SE

T N

2N

C

CC

–V

/

TLE2021D, DB, JG, P, OR PW PACKAGE

(TOP VIEW)

1

2

3

4

8

7

6

5

1OUT1IN–1IN+

VCC – /GND

VCC+2OUT2IN–2IN+

D, DB, JG, P, OR PW PACKAGE(TOP VIEW)


3 2 1 20 19

9 10 11 12 13

4

5

6

7

8

18

17

16

15

14

NC2OUTNC2IN –NC

NC1IN –

NC1IN +

NC

FK PACKAGE(TOP VIEW)

NC

1OU

TN

C

NC

NC

NC

GN

DN

C2I

N +

CC

–V

/

CC

+V



1

2

3

4

5

6

7

8

16

15

14

13

12

11

10

9

1OUT1IN–1IN+

VCC+2IN+2IN–

2OUTNC

4OUT4IN–4IN+VCC – /GND3IN+3IN–3OUTNC

DW PACKAGE(TOP VIEW)

3 2 1 20 19

9 10 11 12 13

4

5

6

7

8

18

17

16

15

14

4IN+NCVCC– /GNDNC3IN+

1IN+NC

VCC+NC

2IN+

1IN

–1O

UT

NC

3OU

T3I

N –

4OU

T4I

N –

2IN

–2O

UT

NC


1

2

3

4

5

6

7

14

13

12

11

10

9

8

1OUT1IN–1IN+

VCC+2IN+2IN–

2OUT

4OUT4IN–4IN+VCC– /GND3IN+3IN–3OUT

FK PACKAGE(TOP VIEW)

J OR N PACKAGE(TOP VIEW)

TLE2021Y chip information

This chip, when properly assembled, display characteristics similar to the TLE2021. Thermal compression orultrasonic bonding may be used on the doped-aluminum bonding pads. This chip may be mounted withconductive epoxy or a gold-silicon preform.

BONDING PAD ASSIGNMENTS

CHIP THICKNESS: 15 MILS TYPICAL

BONDING PADS: 4 × 4 MILS MINIMUM

TJmax= 150°C

TOLERANCES ARE ±10%.

ALL DIMENSIONS ARE IN MILS.

PIN (4) IS INTERNALLY CONNECTEDTO BACKSIDE OF CHIP.

+

–OUT

IN+

IN–

VCC+(7)

(3)

(2)(6)

(4)VCC– /GND

(1)

(5)

OFFSET N1

OFFSET N2

78

54

(1)

(2) (3)

(4)

(5)(6)(7)





This chip, when properly assembled, displays characteristics similar to TLE2022. Thermal compression orultrasonic bonding may be used on the doped-aluminum bonding pads. This chip may be mounted withconductive epoxy or a gold-silicon preform.




TJmax = 150°C TOLERANCES ARE ±10%.



+

–OUT

IN+

IN–

VCC+(8)

(6)

(3)

(2)

(5)

(1)

–

+(7) IN+

IN–OUT

(4)

VCC–80

86

(1)

(2) (3)

(4)

(5)

(6)(7)

(8)




This chip, when properly assembled, displays characteristics similar to the TLE2024. Thermal compression orultrasonic bonding may be used on the doped aluminum-bonding pads. This chip may be mounted withconductive epoxy or a gold-silicon preform.




TJmax = 150°C

TOLERANCES ARE ±10%.



+

–1OUT

1IN+

1IN–

VCC+(4)

(6)

(3)

(2)

(5)

(1)

–

+(7) 2IN+

2IN–2OUT

(11)VCC– /GND

+

–3OUT

2IN+

3IN–

(13)

(10)

(9)

(12)

(8)

–

+(14)4OUT

4IN+

4IN–

100

140




equivalent schematic (each amplifier)

IN –Q23 Q25

Q1

Q2

Q3

Q4

Q5

Q6

Q7

Q8

Q9

Q10

Q11

Q12

Q13

Q14

Q15

Q16

Q17

Q18

Q19

Q20

Q21

Q22

Q24

Q26

Q27

Q28

Q29

Q30

Q31

Q32

Q33

Q34

Q35

Q36

Q37

Q38

Q39

Q40D1 D2

D3

D4IN +

OUT

OFFSET N1(see Note A)

VCC+

VCC– /GND

C1

R1

R2

R3

R4

R5

C2

R6

R7

C4

C3

OFFSET N2(see Note A)

ACTUAL DEVICE COMPONENT COUNT

COMPONENT TLE2021 TLE2022 TLE2024

Transistors 40 80 160

Resistors 7 14 28

Diodes 4 8 16

Capacitors 4 8 16



absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†

Supply voltage, VCC+ (see Note 1) 20 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Supply voltage, VCC– (see Note 1) –20 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Differential input voltage, VID (see Note 2) ±0.6 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input voltage range, VI (any input, see Note 1) ±VCC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Input current, II (each input) ±1 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Output current, IO (each output): TLE2021 ±20 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

TLE2022 ±30 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TLE2024 ±40 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Total current into VCC+ 80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Total current out of VCC– 80 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Duration of short-circuit current at (or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Continuous total power dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operating free-air temperature range, TA: C suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

I suffix –40°C to 85°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M suffix –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Case temperature for 60 seconds, TC: FK package 260°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, DP, P, or PW package 260°C. . . . . . . . Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package 300°C. . . . . . . . . . . . . . . . . . . .

† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, andfunctional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is notimplied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+, and VCC– .2. Differential voltages are at IN+ with respect to IN–. Excessive current flows if a differential input voltage in excess of approximately

±600 mV is applied between the inputs unless some limiting resistance is used.3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum

dissipation rating is not exceeded.

DISSIPATION RATING TABLE

PACKAGETA ≤ 25°C

POWER RATINGDERATING FACTORABOVE TA = 25°C

TA = 70°CPOWER RATING



D–8 725 mW 5.8 mW/°C 464 mW 377 mW 145 mW

DB–8 525 mW 4.2 mW/°C 336 mW — —

DW–16 1025 mW 8.2 mW/°C 656 mW 533 mW 205 mW

FK 1375 mW 11.0 mW/°C 880 mW 715 mW 275 mW

J–14 1375 mW 11.0 mW/°C 880 mW 715 mW 275 mW

JG–8 1050 mW 8.4 mW/°C 672 mW 546 mW 210 mW

N–14 1150 mW 9.2 mW/°C 736 mW 598 mW 230 mW

P–8 1000 mW 8.0 mW/°C 640 mW 520 mW 200 mW

PW–8 525 mW 4.2 mW/°C 336 mW — —

recommended operating conditions

C SUFFIX I SUFFIX M SUFFIXUNIT

MIN MAX MIN MAX MIN MAXUNIT

Supply voltage, VCC ±2 ±20 ±2 ±20 ±2 ±20 V

Common mode input voltage VICVCC = ± 5 V 0 3.5 0 3.2 0 3.2

VCommon-mode input voltage, VICVCC± = ±15 V –15 13.5 –15 13.2 –15 13.2

V

Operating free-air temperature, TA 0 70 –40 85 –55 125 °C

TLE202x, TLE202xA, TLE202xB, TLE202xYEXCALIBUR HIG

H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•9

TLE2021 electrical characteristics at specified free-air temperature, VCC = 5 V (unless otherwise noted)

PARAMETER TEST CONDITIONS T †TLE2021C TLE2021AC TLE2021BC

UNITPARAMETER TEST CONDITIONS TA†MIN TYP MAX MIN TYP MAX MIN TYP MAX

UNIT

VIO Input offset voltage25°C 120 600 100 300 80 200

µVVIO Input offset voltageFull range 850 600 300

µV

αVIOTemperature coefficient of input offset voltage

Full range 2 2 2 µV/°C

Input offset voltage long-term drift(see Note 4) VIC = 0, RS = 50 Ω

25°C 0.005 0.005 0.005 µV/mo

IIO Input offset current

IC , S25°C 0.2 6 0.2 6 0.2 6

nAIIO Input offset currentFull range 10 10 10

nA

IIB Input bias current25°C 25 70 25 70 25 70

nAIIB Input bias currentFull range 90 90 90

nA

VICR Common mode input voltage range RS = 50 Ω

25°C0to

3.5

– 0.3to4

0to

3.5

– 0.3to4

0to

3.5

– 0.3to4

VVICR Common-mode input voltage range RS = 50 Ω

Full range0to

3.5

0to

3.5

0to

3.5

V

VOH High level output voltage25°C 4 4.3 4 4.3 4 4.3

VVOH High-level output voltage

RL= 10 kΩFull range 3.9 3.9 3.9

V

VOL Low level output voltage

RL= 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8

VVOL Low-level output voltageFull range 0.85 0.85 0.85

V

AVDLarge-signal differential VO = 1.4 V to 4 V, 25°C 0.3 1.5 0.3 1.5 0.3 1.5

V/µVAVDg g

voltage amplificationO ,

RL = 10 kΩ Full range 0.3 0.3 0.3V/µV

CMRR Common mode rejection ratioVIC = VICRmin, 25°C 85 110 85 110 85 110

dBCMRR Common-mode rejection ratio IC ICR ,RS = 50 Ω Full range 80 80 80

dB

kSVRSupply-voltage rejection ratio

VCC = 5 V to 30 V25°C 105 120 105 120 105 120

dBkSVRy g j

(∆VCC/∆VIO)VCC = 5 V to 30 V

Full range 100 100 100dB

ICC Supply current25°C 200 300 200 300 200 300

µAICC Supply currentVO = 2 5 V No load

Full range 300 300 300µA

∆ICCSupply-current change over operating temperature range

VO = 2.5 V, No load

Full range 5 5 5 µA

† Full range is 0°C to 70°C.NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation

and assuming an activation energy of 0.96 eV.


H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

10P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•

TLE2021 electrical characteristics at specified free-air temperature, VCC = ±15 V (unless otherwise noted)

PARAMETER TEST CONDITIONS T †TLE2021C TLE2021AC TLE2021BC


UNIT



µV



Input offset voltage long-term drift(see Note 4) VIC = 0, RS = 50 Ω 25°C 0.006 0.006 0.006 µV/mo

IIO Input offset current25°C 0.2 6 0.2 6 0.2 6


nA



nA

VICR Common mode input voltage range RS 50 Ω

25°C–15

to13.5

–15.3to14

–15to

13.5

–15.3to14

–15to

13.5

–15.3to14


Full range–15

to13.5

–15to

13.5

–15to

13.5

V

VOMMaximum positive peak 25°C 14 14.3 14 14.3 14 14.3

VVOM+ output voltage swingRL = 10 kΩ

Full range 13.9 13.9 13.9V

VOMMaximum negative peak

RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM –g

output voltage swing Full range –13.7 –13.7 –13.7V

AVDLarge-signal differential VO = ± 10 V, 25°C 1 6.5 1 6.5 1 6.5

V/µVAVDg g


RL = 10 kΩ Full range 1 1 1V/µV

CMRR Common mode rejection ratioVIC = VICR min, 25°C 100 115 100 115 100 115


dB

kSVRSupply-voltage rejection ratio VCC ± = ± 2.5 V 25°C 105 120 105 120 105 120

dBkSVRy g j

(∆VCC/∆VIO)CC ±

to ± 15 V Full range 100 100 100dB


µAICC Supply currentVO = 0 No load



VO = 0, No load





H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•11


PARAMETER TEST CONDITIONS TA† TLE2022C TLE2022AC TLE2022BCUNITPARAMETER TEST CONDITIONS TA†

MIN TYP MAX MIN TYP MAX MIN TYP MAXUNIT

VIO Input offset voltage25°C 600 400 250


µV

αVIOTemperature coefficient of

Full range 2 2 2 µV/°CαVIO input offset voltageFull range 2 2 2 µV/°C

Input offset voltage long-termVIC = 0 RS = 50 Ω 25°C 0 005 0 005 0 005 µV/mo

g gdrift (see Note 4)

VIC = 0, RS = 50 Ω 25°C 0.005 0.005 0.005 µV/mo



nA



nA

0 –0.3 0 –0.3 0 –0.325°C

0to

0.3to

0to

0.3to

0to

0.3to

VICRCommon-mode input

RS = 50 Ω3.5 4 3.5 4 3.5 4

VVICR voltage rangeRS = 50 Ω

0 0 0V

Full range0to

0to

0tog

3.5 3.5 3.5



RL = 10 kΩFull range 3.9 3.9 3.9

V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8


V

AVDLarge-signal differential

VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.3 1.5 0.4 1.5 0.5 1.5

V/µVAVDg g

voltage amplificationVO = 1.4 V to 4 V, RL = 10 kΩ

Full range 0.3 0.4 0.5V/µV

CMRR Common mode rejection ratio VIC = VICRmin RS = 50 Ω25°C 85 100 87 102 90 105

dBCMRR Common-mode rejection ratio VIC = VICRmin, RS = 50 ΩFull range 80 82 85

dB


VCC = 5 V to 30 V25°C 100 115 103 118 105 120

dBkSVRy g j

(∆VCC ± /∆VIO)VCC = 5 V to 30 V



µAICC Supply current

VO = 2 5 V No loadFull range 600 600 600

µA

∆ICCSupply current change over

VO = 2.5 V, No load

Full range 7 7 7 µA∆ICCy g

operating temperature range Full range 7 7 7 µA

† Full range is 0°C to 70°C.NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius

equation and assuming an activation energy of 0.96 eV.


H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

12P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONS TA† TLE2022C TLE2022AC TLE2022BCUNITPARAMETER TEST CONDITIONS TA†




µV

Temperature coefficient ofFull range 2 2 2 µV/°CαVIO input offset voltageFull range 2 2 2 µV/°C

Input offset voltage long-termVIC 0 RS 50 Ω 25°C 0 006 0 006 0 006 µV/mo

g gdrift (see Note 4)

VIC = 0, RS = 50 Ω 25°C 0.006 0.006 0.006 µV/mo



nA



nA

–15 –15.3 –15 –15.3 –15 –15.325°C

15to

15.3to

15to

15.3to

15to

15.3to


RS 50 Ω13.5 14 13.5 14 13.5 14


–15 –15 –15V

Full range15to

15to

15tog

13.5 13.5 13.5


VVOM + output voltage swingRL = 10 kΩ

Full range 13.9 13.9 13.9V


RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM–g



VO ±10 V RL 10 kΩ25°C 0.8 4 1 7 1.5 10

V/µVAVDg g

voltage amplificationVO = ±10 V, RL = 10 kΩ

Full range 0.8 1 1.5V/µV



dB

kSupply-voltage rejection ratio

VCC± = ±2 5 V to ±15 V25°C 100 115 103 118 105 120

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ±2.5 V to ±15 V




VO = 0 No loadFull range 700 700 700

µA


VO = 0, No load






H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•13


PARAMETER TEST CONDITIONS TA†TLE2024C TLE2024AC TLE2024BC


UNIT



µV

αVIOTemperature coefficient ofinput offset voltage


Input offset voltage long-termdrift (see Note 4) VIC = 0, RS = 50 Ω 25°C 0.005 0.005 0.005 µV/mo



nA



nA

VICRCommon-mode input voltage

RS = 50 Ω

25°C0to

3.5

–0.3to4

0to

3.5

–0.3to4

0to

3.5

–0.3to4

VVICRg

rangeRS = 50 Ω

Full range0to

3.5

0to

3.5

0to

3.5

V

VOH High level output voltage25°C 3.9 4.2 3.9 4.2 4 4.3



V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8


V


VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.2 1.5 0.3 1.5 0.4 1.5

V/µVAVDg g





dB


VCC = 5 V to 30 V25°C 98 112 100 115 103 117

dBkSVRy g j






∆ICCSupply current change overoperating temperature range

VO = 2.5 V, No load





H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

14P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONS TA†TLE2024C TLE2024AC TLE2024BC


UNIT



µV






nA



nA


RS = 50 Ω

25°C–15

to13.5

–15.3to14

–15to

13.5

–15.3to14

–15to

13.5

–15.3to14

VVICRg

rangeRS = 50 Ω

Full range–15

to13.5

–15to

13.5

–15to

13.5

V

VOMMaximum positive peak output 25°C 13.8 14.1 13.9 14.2 14 14.3

VVOM+ voltage swingRL = 10 kΩ

Full range 13.7 13.8 13.9V

VOMMaximum negative peak output

RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM–g

voltage swing Full range –13.6 –13.6 –13.6V


VO = ±10 V RL = 10 kΩ25°C 0.4 2 0.8 4 1 7

V/µVAVDg g


Full range 0.4 0.8 1V/µV



dB


VCC± ± 2 5 V to ±15 V25°C 98 112 100 115 103 117

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ± 2.5 V to ±15 V





µA


VO = 0, No load






H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•15


PARAMETER TEST CONDITIONS TA† TLE2021I TLE2021AI TLE2021BIUNITPARAMETER TEST CONDITIONS TA†




µV






nA



nA

VICR Common mode input voltage range RS = 50 Ω

25°C0to

3.5

–0.3to4

0to

3.5

–0.3to4

0to

3.5

– 0.3to4


Full range0to

3.2

0to

3.2

0to

3.2

V




V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8


V

AVDLarge-signal differential VO = 1.4 V to 4 V, 25°C 0.3 1.5 0.3 1.5 0.3 1.5

V/µVAVDg g





dB


VCC = 5 V to 30 V25°C 105 120 105 120 105 120

dBkSVRy g j




µAICC Supply currentVO = 2.5 V, Full range 300 300 300

µA


No loadFull range 6 6 6 µA

† Full range is – 40°C to 85°C.NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation



H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

16P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•

TLE2021 electrical characteristics at specified free-air temperature, VCC = ± 15 V (unless otherwise noted)





µV






nA



nA

VICRCommon-mode input voltage range

RS = 50 Ω

25°C–15

to13.5

–15.3to14

–15to

13.5

–15.3to14

–15to

13.5

–15.3to14

VVICRg g

RS = 50 Ω

Full range–15

to13.2

–15to

13.2

–15to

13.2

V

VOMMaximum positive peak output 25°C 14 14.3 14 14.3 14 14.3

VVOM + voltage swingRL = 10 kΩ

Full range 13.9 13.9 13.9V


RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM –g


AVDLarge-signal differential VO = 10 V, 25°C 1 6.5 1 6.5 1 6.5

V/µVAVDg g





dB

kSVRSupply-voltage rejection ratio VCC ± = ± 2. 5 V 25°C 105 120 105 120 105 120

dBkSVRy g j

(∆VCC/∆VIO)CC ±

to ± 15 V Full range 100 100 100dB



VO = 0 V No loadFull range 350 350 350

µA


VO = 0 V, No load


† Full range is – 40°C to 85°C.NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation



H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•17






µV


Input offset voltage long-termV 0 R 50 Ω 25°C 0 005 0 005 0 005 µV/mo

g gdrift (see Note 4) VIC = 0, RS = 50 Ω 25°C 0.005 0.005 0.005 µV/mo



nA



nA

0 –0.3 0 –0.3 0 –0.325°C

0to

0.3to

0to

0.3to

0to

0.3to


RS = 50 Ω3.5 4 3.5 4 3.5 4


0 0 0V

Full range0to

0to

0tog

3.2 3.2 3.2




V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8


V


VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.3 1.5 0.4 1.5 0.5 1.5

V/µVAVDg g





dB

kSupply-voltage rejection ratio

VCC = 5 V to 30 V25°C 100 115 103 118 105 120

dBkSVRy g j

(∆VCC± /∆VIO)VCC = 5 V to 30 V





µA


VO = 2.5 V, No load



† Full range is –40°C to 85°C.NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius equation



H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

18P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•

TLE2022 electrical characteristics at specified free-air temperature, VCC = ± 15 V (unless otherwise noted)





µV






nA



nA

– 15 –15.3 – 15 –15.3 – 15 –15.325°C to to to to to to


RS 50 Ω13.5 14 13.5 14 13.5 14


– 15 – 15 – 15V

Full range to to tog13.2 13.2 13.2



Full range 13.9 13.9 13.9V


RL = 10 kΩ25°C – 13.7 – 14.1 – 13.7 – 14.1 – 13.7 – 14.1

VVOM –g

output voltage swing Full range – 13.6 – 13.6 – 13.6V


VO ± 10 V RL 10 kΩ25°C 0.8 4 1 7 1.5 10

V/µVAVDg g

voltage amplificationVO = ± 10 V, RL = 10 kΩ




dB


VCC = ±2 5 V to ±15 V25°C 100 115 103 118 105 120

dBkSVRy g j

(∆VCC± /∆VIO)VCC = ±2.5 V to ±15 V





µA


VO = 0, No load



† Full range is –40°C to 85°C.NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolated to TA = 25°C using the Arrhenius



H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•19


PARAMETER TEST CONDITIONS TA†TLE2024I TLE2024AI TLE2024BI


UNIT



µV






nA



nA


RS = 50 Ω

25°C0to

3.5

–0.3to4

0to

3.5

–0.3to4

0to

3.5

–0.3to4

VVICRg

rangeRS = 50 Ω

Full range0to

3.2

0to

3.2

0to

3.2

V

VOMMaximum positive peak 25°C 3.9 4.2 3.9 4.2 4 4.3


Full range 3.7 3.7 3.8V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8

VVOM–g

output voltage swing Full range 0.95 0.95 0.95V


VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.2 1.5 0.3 1.5 0.4 1.5

V/µVAVDg g





dB


VCC± = ±2 5 V to ±15 V25°C 98 112 100 115 103 117

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ±2.5 V to ±15 V






VO = 0, No load





H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

20P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONS TA†TLE2024I TLE2024AI TLE2024BI


UNIT



µV

αVIOTemperature coefficient of inputoffset voltage





nA



nA


RS = 50 Ω

25°C–15

to13.5

–15.3to14

–15to

13.5

–15.3to14

–15to

13.5

–15.3to14

VVICRg

rangeRS = 50 Ω

Full range–15

to13.2

–15to

13.2

–15to

13.2

V



Full range 13.7 13.7 13.8V


RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM–g



VO = ±10 V RL = 10 kΩ25°C 0.4 2 0.8 4 1 7

V/µVAVDg g





dB


VCC± ± 2 5 V to ±15 V25°C 98 112 100 115 103 117

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ± 2.5 V to ±15 V





µA


VO = 0, No load






H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•21


PARAMETER TEST CONDITIONS T †TLE2021M TLE2021AM TLE2021BM


UNIT



µV






nA



nA


RS = 50 Ω

25°C0to

3.5

–0.3to4

0to

3.5

–0.3to4

0to

3.5

–0.3to4


Full range0to

3.2

0to

3.2

0to

3.2

V




V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8


V


VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.3 1.5 0.3 1.5 0.3 1.5

V/µVAVDg g





dB


VCC = 5 V to 30 V25°C 105 120 105 120 105 120

dBkSVRy g j






∆ICCSupply current change over operating temperature range

VO = 2.5 V, No load





H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

22P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONS T †TLE2021M TLE2021AM TLE2021BM


UNIT



µV






nA



nA


RS = 50 Ω

25°C–15

to13.5

–15.3to14

–15to

13.5

–15.3to14

–15to

13.5

–15.3to14


Full range–15

to13.2

–15to

13.2

–15to

13.2

V



Full range 13.8 13.8 13.8V


RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM –g



VO = ±10 V RL = 10 kΩ25°C 1 6.5 1 6.5 1 6.5

V/µVAVDg g





dB


VCC± ± 2 5 V to ±15 V25°C 105 120 105 120 105 120

dBkSVRy g j

(∆VCC± /∆VIO) VCC± = ± 2.5 V to ±15 VFull range 100 100 100

dB




∆ICCSupply current change over operating temperature range

VO = 0, No load





H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•23


PARAMETER TEST CONDITIONS TA† TLE2022M TLE2022AM TLE2022BMUNITPARAMETER TEST CONDITIONS TA†




µV






nA



nA

0 –0.3 0 –0.3 0 –0.325°C to to to to to to


RS = 50 Ω3.5 4 3.5 4 3.5 4


0 0 0V





V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8


V


VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.3 1.5 0.4 1.5 0.5 1.5

V/µVAVDg g





dB


VCC = 5 V to 30 V25°C 100 115 103 118 105 120

dBkSVRy g j






µA


VO = 2.5 V, No load






H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

24P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONS TA† TLE2022M TLE2022AM TLE2022BMUNITPARAMETER TEST CONDITIONS TA†




µV

αVIOTemperature coefficient of

Full range 2 2 2 µV/°CαVIO input offset voltageFull range 2 2 2 µV/°C





nA



nA

–15 –15.3 –15 –15.3 –15 –15.325°C to to to to to to


RS 50 Ω13.5 14 13.5 14 13.5 14


–15 –15 –15V




Full range 13.9 13.9 13.9V


RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM–g



VO ±10 V RL 10 kΩ25°C 0.8 4 1 7 1.5 10

V/µVAVDg g





dB


VCC± = ±2 5 V to ±15 V25°C 100 115 103 118 105 120

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ±2.5 V to ±15 V





µA


VO = 0, No load






H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•25


PARAMETER TEST CONDITIONS TA†TLE2024M TLE2024AM TLE2024BM


UNIT



µV






nA



nA


RS = 50 Ω

25°C0to

3.5

–0.3to4

0to

3.5

–0.3to4

0to

3.5

–0.3to4

VVICRg

rangeRS = 50 Ω

Full range0to

3.2

0to

3.2

0to

3.2

V

VOMMaximum positive peak 25°C 3.9 4.2 3.9 4.2 4 4.3


Full range 3.7 3.7 3.8V


RL = 10 kΩ25°C 0.7 0.8 0.7 0.8 0.7 0.8

VVOM–g

output voltage swing Full range 0.95 0.95 0.95V


VO = 1 4 V to 4 V RL = 10 kΩ25°C 0.2 1.5 0.3 1.5 0.4 1.5

V/µVAVDg g





dB


VCC± = ±2 5 V to ±15 V25°C 98 112 100 115 103 117

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ±2.5 V to ±15 V






VO = 0, No load





H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

26P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONS TA†TLE2024M TLE2024AM TLE2024BM


UNIT



µV






nA



nA


RS = 50 Ω

25°C–15

to13.5

–15.3to14

–15to

13.5

–15.3to14

–15to

13.5

–15.3to14

VVICRg

rangeRS = 50 Ω

Full range–15

to13.2

–15to

13.2

–15to

13.2

V



Full range 13.7 13.7 13.8V


RL = 10 kΩ25°C –13.7 –14.1 –13.7 –14.1 –13.7 –14.1

VVOM–g



VO = ±10 V RL = 10 kΩ25°C 0.4 2 0.8 4 1 7

V/µVAVDg g





dB


VCC± ± 2 5 V to ±15 V25°C 98 112 100 115 103 117

dBkSVRy g j

(∆VCC± /∆VIO)VCC± = ± 2.5 V to ±15 V





µA


VO = 0, No load






H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•27

TLE2021 operating characteristics, VCC = 5 V, TA = 25°C

PARAMETER TEST CONDITIONS TAC SUFFIX I SUFFIX M SUFFIX

UNITPARAMETER TEST CONDITIONS TAMIN TYP MAX MIN TYP MAX MIN TYP MAX

UNIT

SR Slew rate at unity gain VO = 1 V to 3 V, See Figure 1 25°C 0.5 0.5 0.5 V/µs

VEquivalent input noise voltage f = 10 Hz 25°C 21 50 21 50 21

nV/HzVnq g

(see Figure 2) f = 1 kHz 25°C 17 30 17 30 17nV/Hz

VN(PP)Peak-to-peak equivalent input f = 0.1 to 1 Hz 25°C 0.16 0.16 0.16

µVVN(PP)q

noise voltage f = 0.1 to 10 Hz 25°C 0.47 0.47 0.47µV

In Equivalent input noise current 25°C 0.09 0.09 0.9 pA/Hz

B1 Unity-gain bandwidth See Figure 3 25°C 1.2 1.2 1.2 MHz

φm Phase margin at unity gain See Figure 3 25°C 42° 42° 42°

TLE2021 operating characteristics at specified free-air temperature, VCC = ±15 V

PARAMETER TEST CONDITIONS T †C SUFFIX I SUFFIX M SUFFIX


UNIT

SR Slew rate at unity gain VO = 1V to 3 V See Figure 125°C 0.45 0.65 0.45 0.65 0.45 0.65

V/µsSR Slew rate at unity gain VO = 1V to 3 V, See Figure 1Full range 0.45 0.42 0.45

V/µs


nV/HzVnq g

(see Figure 2) f = 1 kHz 25°C 15 30 15 30 15nV/Hz

VN(PP)Peak-to-peak equivalent input f = 0.1 to 1 Hz 25°C 0.16 0.16 0.16

µVVN(PP)q

noise voltage f = 0.1 to 10 Hz 25°C 0.47 0.47 0.47µV

In Equivalent input noise current 25°C 0.09 0.09 0.09 pA/Hz

B1 Unity-gain bandwidth See Figure 3 25°C 2 2 2 MHz

φm Phase margin at unity gain See Figure 3 25°C 46° 46° 46°† Full range is 0°C to 70°C for the C-suffix devices, –40°C to 85°C for the I-suffix devices, and –55°C to 125°C for the M-suffix devices.


H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

28P

OS

T O

FF

ICE

BO

X 655303 D

ALLA

S, T

EX

AS

75265•


PARAMETER TEST CONDITIONSC SUFFIX I SUFFIX M SUFFIX

UNITPARAMETER TEST CONDITIONSMIN TYP MAX MIN TYP MAX MIN TYP MAX

UNIT

SR Slew rate at unity gain VO = 1 V to 3 V, See Figure 1 0.5 0.5 0.5 V/µs

VEquivalent input noise voltage f = 10 Hz 21 50 21 50 21

nV/√HzVnq g

(see Figure 2) f = 1 kHz 17 30 17 30 17nV/√Hz

VN(PP) Peak to peak equivalent input noise voltagef = 0.1 to 1 Hz 0.16 0.16 0.16

µVVN(PP) Peak-to-peak equivalent input noise voltagef = 0.1 to 10 Hz 0.47 0.47 0.47

µV

In Equivalent input noise current 0.1 0.1 0.1 pA/√Hz

B1 Unity-gain bandwidth See Figure 3 1.7 1.7 1.7 MHz

φm Phase margin at unity gain See Figure 3 47° 47° 47°

TLE2022 operating characteristics at specified free-air temperature, VCC = ±15 V

PARAMETER TEST CONDITIONS TA† C SUFFIX I SUFFIX M SUFFIXUNITPARAMETER TEST CONDITIONS TA†


SR Slew rate at unity gain VO = ±10 V See Figure 125°C 0.45 0.65 0.45 0.65 0.45 0.65

V/µsSR Slew rate at unity gain VO = ±10 V, See Figure 1Full range 0.45 0.42 0.4

V/µs

VEquivalent input noise f = 10 Hz 25°C 19 50 19 50 19

nV/√HzVnq

voltage (see Figure 2) f = 1 kHz 25°C 15 30 15 30 15nV/√Hz

VN(PP)Peak-to-peak equivalent f = 0.1 to 1 Hz 25°C 0.16 0.16 0.16

µVVN(PP)q

input noise voltage f = 0.1 to 10 Hz 25°C 0.47 0.47 0.47µV

In Equivalent input noise current 25°C 0.1 0.1 0.1 pA/√Hz


φm Phase margin at unity gain See Figure 3 25°C 52° 52° 52°† Full range is 0°C to 70°C.


H-SPEED LOW

-POW

ER PRECISION

OPERATIO

NAL AMPLIFIERS

SLO

S191B

– FE

BR

UA

RY

1997 – RE

VIS

ED

JAN

UA

RY

2002

PO

ST

OF

FIC

E B

OX

655303 DA

LLAS

, TE

XA

S 75265

•29


PARAMETER TEST CONDITIONSC SUFFIX I SUFFIX M SUFFIX

UNITPARAMETER TEST CONDITIONSMIN TYP MAX MIN TYP MAX MIN TYP MAX

UNIT

SR Slew rate at unity gain VO = 1 V to 3 V, See Figure 1 0.5 0.5 0.5 V/µs

V Equivalent input noise voltage (see Figure 2)f = 10 Hz 21 50 21 50 21

nV/√HzVn Equivalent input noise voltage (see Figure 2)f = 1 kHz 17 30 17 30 17

nV/√Hz

VN(PP) Peak to peak equivalent input noise voltagef = 0.1 to 1 Hz 0.16 0.16 0.16

µVVN(PP) Peak-to-peak equivalent input noise voltagef = 0.1 to 10 Hz 0.47 0.47 0.47

µV

In Equivalent input noise current 0.1 0.1 0.1 pA/√Hz

B1 Unity-gain bandwidth See Figure 3 1.7 1.7 1.7 MHz

φm Phase margin at unity gain See Figure 3 47° 47° 47°

TLE2024 operating characteristics at specified free-air temperature, VCC = ±15 V (unless otherwise noted)

PARAMETER TEST CONDITIONS TA†C SUFFIX I SUFFIX M SUFFIX


UNIT

SR Slew rate at unity gain VO = ±10 V See Figure 125°C 0.45 0.7 0.45 0.7 0.45 0.7

V/µsSR Slew rate at unity gain VO = ±10 V, See Figure 1Full range 0.45 0.42 0.4

V/µs


nV/√HzVnq g

(see Figure 2) f = 1 kHz 25°C 15 30 15 30 15nV/√Hz

VN(PP)Peak-to-peak equivalent input noise f = 0.1 to 1 Hz 25°C 0.16 0.16 0.16

µVVN(PP)q

voltage f = 0.1 to 10 Hz 25°C 0.47 0.47 0.47µV

In Equivalent input noise current 25°C 0.1 0.1 0.1 pA/√Hz


φm Phase margin at unity gain See Figure 3 25°C 52° 52° 52°† Full range is 0°C to 70°C.



TLE2021Y electrical characteristics at VCC = 5 V, TA = 25°C (unless otherwise noted)

PARAMETER TEST CONDITIONSTLE2021Y

UNITPARAMETER TEST CONDITIONSMIN TYP MAX

UNIT

VIO Input offset voltage 150 µV

Input offset voltage long-term drift (see Note 4)VIC = 0 RS = 50 Ω

0.005 µV/mo

IIO Input offset currentVIC = 0, RS = 50 Ω

0.5 nA

IIB Input bias current 35 nA

VICR Common-mode input voltage range RS = 50 Ω– 0.3

to4

V

VOH Maximum high-level output voltageRL = 10 kΩ

4.3 V

VOL Maximum low-level output voltageRL = 10 kΩ

0.7 V

AVD Large-signal differential voltage amplification VO = 1.4 to 4 V, RL = 10 kΩ 1.5 V/µV

CMRR Common-mode rejection ratio VIC = VICR min, RS = 50 Ω 100 dB

kSVR Supply-voltage rejection ratio (∆VCC± /∆VIO) VCC = 5 V to 30 V 115 dB

ICC Supply current VO = 2.5 V, No load 400 µA

NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolatedto TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

TLE2021Y operating characteristics at VCC = 5 V, TA = 25°C



UNIT

SR Slew rate at unity gain VO = 1 V to 3 V 0.5 V/µs

V Equivalent input noise voltagef = 10 Hz 21

nV/√HzVn Equivalent input noise voltagef = 1 kHz 17

nV/√Hz

VN(PP) Peak to peak equivalent input noise voltagef = 0.1 to 1 Hz 0.16

µVVN(PP) Peak-to-peak equivalent input noise voltagef = 0.1 to 10 Hz 0.47

µV

In Equivalent input noise current 0.1 pA/√Hz

B1 Unity-gain bandwidth 1.7 MHz

φm Phase margin at unity gain 47°




TLE2022Y electrical characteristics, VCC = 5 V, TA = 25°C (unless otherwise noted)



UNIT

VIO Input offset voltage 150 600 µV

Input offset voltage long-term drift (see Note 4)VIC = 0 RS = 50 Ω

0.005 µV/mo

IIO Input offset currentVIC = 0, RS = 50 Ω

0.5 nA


VICR Common-mode input voltage range RS = 50 Ω– 0.3

to4

V

VOH Maximum high-level output voltageRL = 10 kΩ

4.3 V

VOL Maximum low-level output voltageRL = 10 kΩ

0.7 V

AVD Large-signal differential voltage amplification VO = 1.4 to 4 V, RL= 10 kΩ 1.5 V/µV

CMRR Common-mode rejection ratio VIC = VICR min, RS = 50 Ω 100 dB

kSVR Supply-voltage rejection ratio (∆VCC± /∆VIO) VCC = 5 V to 30 V 115 dB


NOTE 4: Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolatedto TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

TLE2022Y operating characteristics, VCC = 5 V, TA = 25°C



UNIT

SR Slew rate at unity gain VO = 1 V to 3 V, See Figure 1 0.5 V/µs

V Equivalent input noise voltage (see Figure 2)f = 10 Hz 21

nV/√HVn Equivalent input noise voltage (see Figure 2)f = 1 kHz 17

nV/√Hz



µV


B1 Unity-gain bandwidth See Figure 3 1.7 MHz

φm Phase margin at unity gain See Figure 3 47°



TLE2024Y electrical characteristics, VCC = 5 V, TA = 25°C (unless otherwise noted)



UNIT

Input offset voltage long-term drift (see Note 4) 0.005 µV/mo

IIO Input offset current VIC = 0, RS = 50 Ω 0.6 nA


VICR Common-mode input voltage range RS = 50 Ω–0.3

to4

V

VOH High-level output voltageRL = 10 kΩ

4.2 V

VOL Low-level output voltageRL = 10 kΩ

0.7 V

AVDLarge-signal differentialvoltage amplification

VO = 1.4 V to 4 V, RL = 10 kΩ 1.5 V/µV

CMRR Common-mode rejection ratio VIC = VICRmin, RS = 50 Ω 90 dB

kSVRSupply-voltage rejection ratio(∆VCC/∆VIO)

VCC = 5 V to 30 V 112 dB


NOTE 4. Typical values are based on the input offset voltage shift observed through 168 hours of operating life test at TA = 150°C extrapolatedto TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.

TLE2024Y operating characteristics, VCC = 5 V, TA = 25°C



UNIT

SR Slew rate at unity gain VO = 1 V to 3 V, See Figure 1 0.5 V/µs

V Equivalent input noise voltage (see Figure 2)f = 10 Hz 21

nV/√HzVn Equivalent input noise voltage (see Figure 2)f = 1 kHz 17

nV/√Hz



µV


B1 Unity-gain bandwidth See Figure 3 1.7 MHz

φm Phase margin at unity gain See Figure 3 47°




PARAMETER MEASUREMENT INFORMATION

–15 V

15 V

20 kΩ

VI

20 kΩ

VO

20 kΩ

VI

30 pF(see Note A)

VO

5 V

20 kΩ

–

+

–

+

(a) SINGLE SUPPLY

NOTE A: CL includes fixture capacitance.

(b) SPLIT SUPPLY

30 pF(see Note A)

Figure 1. Slew-Rate Test Circuit

2.5 V

5 V

VO

2 kΩ

20 Ω

20 Ω20 Ω20Ω

VO

–15 V

15 V

2 kΩ

–

+

–

+

(a) SINGLE SUPPLY

(b) SPLIT SUPPLY

Figure 2. Noise-Voltage Test Circuit

2.5 V

–

+

–

+

VO

10 kΩ

15 V

–15 V

10 kΩ

100ΩVIVI

10 kΩ

VO

100 Ω

10 kΩ

5 V

(a) SINGLE SUPPLY


(b) SPLIT SUPPLY

30 pF(see Note A)

30 pF(see Note A)

Figure 3. Unity-Gain Bandwidth and Phase-Margin Test Circuit



PARAMETER MEASUREMENT INFORMATION

10 kΩ0.1 µF

10 kΩ

–

+

VO

10 kΩ

VI

5 V

–

+

VO

10 kΩ

VI

15 V

– 15 V

(a) SINGLE SUPPLY


(b) SPLIT SUPPLY

30 pF(see Note A)

30 pF(see Note A)

Figure 4. Small-Signal Pulse-Response Test Circuit

typical values

Typical values presented in this data sheet represent the median (50% point) of device parametric performance.




TYPICAL CHARACTERISTICS

Table of Graphs

FIGURE

VIO Input offset voltage Distribution 5, 6, 7

IIB Input bias currentvs Common-mode input voltagevs Free-air temperature

8, 9, 1011, 12, 13

II Input current vs Differential input voltage 14

VOM Maximum peak output voltagevs Output currentvs Free-air temperature

15, 16, 1718

VOH High-level output voltagevs High-level output currentvs Free-air temperature

19, 2021

VOL Low-level output voltagevs Low-level output currentvs Free-air temperature

2223

VO(PP) Maximum peak-to-peak output voltage vs Frequency 24, 25

AVD Large-signal differential voltage amplificationvs Frequencyvs Free-air temperature

2627, 28, 29

IOS Short-circuit output currentvs Supply voltagevs Free-air temperature

30 – 3334 – 37

ICC Supply currentvs Supply voltagevs Free-air temperature

38, 39, 4041, 42, 43

CMRR Common-mode rejection ratio vs Frequency 44, 45, 46

SR Slew rate vs Free-air temperature 47, 48, 49

Voltage-follower small-signal pulse response 50, 51

Voltage-follower large-signal pulse response 52 – 57

VN(PP) Peak-to-peak equivalent input noise voltage0.1 to 1 Hz0.1 to 10 Hz

5859

Vn Equivalent input noise voltage vs Frequency 60

B1 Unity-gain bandwidthvs Supply voltagevs Free-air temperature

61, 6263, 64

φm Phase marginvs Supply voltagevs Load capacitancevs Free-air temperature

65, 6667, 6869, 70

Phase shift vs Frequency 26




Figure 5

16

12

8

4

3000–3000

600

20

VIO – Input Offset Voltage – µV

Per

cen

tag

e o

f U

nit

s –

%

–600

ÏÏÏÏP Package

VCC± = ±15 V231 Units Tested From 1 Wafer Lot

DISTRIBUTION OF TLE2021INPUT OFFSET VOLTAGE

TA = 25°C

–450 –150 150 450

Figure 6

–600

Per

cen

tag

e o

f U

nit

s –

%

VIO – Input Offset Voltage – µV

20

2000

–400 –200 0

4

8

12

16

400 600


ÏÏÏÏÏÏÏÏÏÏÏ398 Amplifiers Tested From 1 Wafer LotVCC± = ±15 V

TA = 25°CP Package

Figure 7

–1

Per

cen

tag

e o

f U

nit

s –

%

VIO – Input Offset Voltage – mV

16

10

–0.5 0 0.5

796 Amplifiers Tested From 1 Wafer LotVCC± = ±15 VTA = 25°CN Package

4

8

12


Figure 8

TA = 25°CVCC± = ±15 V

–35

–30

–25

–20

–15

–10

–5

1050–5–100

15

–40

VIC – Common-Mode Input Voltage – V

IIB –

Inp

ut

Bia

s C

urr

ent

– n

A

–15

IBI

TLE2021INPUT BIAS CURRENT

vsCOMMON-MODE INPUT VOLTAGE





Figure 9

–15

IIB –

Inp

ut

Bia

s C

urr

ent

– n

A


–50

15–10 –5 0 5 10–20

–25

–30

–35

–40

–45

VCC± = ±15 V

TA = 25°C

IBI



Figure 10

–15

IIB –

Inp

ut

Bia

s C

urr

ent

– n

A


–60

15–20

–10 –5 0 5 10

–30

–40

–50

VCC± = ±15 V

TA = 25°C

ÁÁÁÁ

I IB



Figure 11

–30

–25

–20

–15

–10

–5

1007550250–25–500

125

–35

TA – Free-Air Temperature – °C

IIB –

Inp

ut

Bia

s C

urr

ent

– n

A

–75

IBI

TLE2021INPUT BIAS CURRENT†

vsFREE-AIR TEMPERATURE

VCC± = ±15 VVO = 0VIC = 0

Figure 12

–75

IIB –

Inp

ut

Bia

s C

urr

ent

– n

A


–50

125–50 –25 0 25 50 75 100–20

–25

–30

–35

–40

–45

VCC± = ±15 VVO = 0VIC = 0

IBI



† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.




Figure 13TA – Free-Air Temperature – °C

–75

IIB –

Inp

ut

Bia

s C

urr

ent

– n

A

–60

–20–50 –25 0 25 50 75 100

–50

–30

–40

125

ÁÁÁÁ

I IB

ÏÏÏÏÏÏÏÏÏ

VO = 0VIC = 0

ÏÏÏÏÏVCC± = ±15 V



Figure 14

TA = 25°CVIC = 0VCC± = ±15 V

0.9

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.90.80.70.60.50.40.30.20.10

1

1

|VID| – Differential Input Voltage – V

II –

Inp

ut

Cu

rren

t –

mA

0

INPUT CURRENTvs

DIFFERENTIAL INPUT VOLTAGE

I I

Figure 15

0

VO

M –

Max

imu

m P

eak

Ou

tpu

t V

olt

age

– V

IO – Output Current – mA

16

100

2 4 6 8

2

4

6

8

10

12

14

VCC± = ±15 VTA = 25°C

ÁÁÁÁÁÁÁÁÁ

V OM

ÏÏÏÏÏÏÏÏ

VOM–

ÏÏÏÏÏÏÏÏ

VOM+

TLE2021MAXIMUM PEAK OUTPUT VOLTAGE

vsOUTPUT CURRENT

Figure 16

0

VO

M| –

Max

imu

m P

eak

Ou

tpu

t V

olt

age

– V

|IO| – Output Current – mA

16

140

2 4 6

2

4

6

8

10

12

14 TA = 25°C

8 10 12

ÁÁÁÁ|V

OM

ÏÏÏÏÏÏ

VOM+

ÏÏÏÏÏÏÏÏ

VOM–

VCC± = ±15 V


vsOUTPUT CURRENT






Figure 17IO – Output Current – mA

0

VO

M –

Max

imu

m P

eak

Ou

tpu

t V

olt

age

– V

16

02 4 6

2

4

6

8

10

12

14

8 10 12

ÏÏÏÏÏÏ

VOM–

14

VCC± = ±5 V

ÏÏÏVOM+

ÁÁÁÁÁÁ

V OM

ÏÏÏÏTA = 25°C


vsOUTPUT CURRENT

Figure 18

–75TA – Free-Air Temperature – °C

15

12512

–50 –25 0 25 50 75 100

12.5

13

13.5

14

14.5

VOM–

VOM+

VCC± = ±15 V

TA = 25°CRL = 10 kΩ

MAXIMUM PEAK OUTPUT VOLTAGE†


VO

M| –

Max

imu

m P

eak

Ou

tpu

t V

olt

age

– V

ÁÁÁÁÁÁÁÁÁ

|VO

M

Figure 19

0

VO

H –

Hig

h-L

evel

Ou

tpu

t V

olt

age

– V

IOH – High-Level Output Current – mA

5

–70

–1 –2 –3 –4 –5 –6

1

2

3

4

TA = 25°CVCC = 5 V

ÁÁÁÁV

OH

TLE2021HIGH-LEVEL OUTPUT VOLTAGE

vsHIGH-LEVEL OUTPUT CURRENT

Figure 20IOH – High-Level Output Current – mA

0

VO

H –

Hig

h-L

evel

Ou

tpu

t V

olt

age

– V

5

0–2 –4 –6 –8

1

2

3

4

TA = 25°CVCC = 5 V

ÁÁÁÁ

V OH

–10

TLE2022 AND TLE2024HIGH-LEVEL OUTPUT VOLTAGE

vsHIGH-LEVEL OUTPUT CURRENT





Figure 21

–75


5

1254

–50 –25 0 25 50 75 100

4.2

4.6

4.8

VO

H –

Hig

h-L

evel

Ou

tpu

t V

olt

age

– V

VCC = 5 V

RL = 10 kΩ

No Load

HIGH-LEVEL OUTPUT VOLTAGE†


ÁÁÁÁV O

H

4.4

Figure 22

0

VO

L –

Lo

w-L

evel

Ou

tpu

t V

olt

age

– V

IOL – Low-Level Output Current – mA

5

30

0.5 1 1.5 2 2.5

1

2

3

4

VCC = 5 VTA = 25°C

LOW-LEVEL OUTPUT VOLTAGEvs

LOW-LEVEL OUTPUT CURRENT

ÁÁÁÁÁÁ

VO

L

Figure 23


1

1250

–50 –25 0 25 50 75 100

0.25

0.5

0.75

IOL = 1 mA

IOL = 0

VCC± = ±5 V

LOW-LEVEL OUTPUT VOLTAGE†


VO

L –

Lo

w-L

evel

Ou

tpu

t V

olt

age

– V

ÁÁÁÁÁÁV

OL

Figure 24

100

VO

PP

– M

axim

um

Pea

k-to

-Pea

k O

utp

ut

Vo

ltag

e –

V

f – Frequency – Hz

5

1 M0

1

2

3

4

1 k 10 k 100 k

MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGEvs

FREQUENCY

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁTA = 25°C

VCC = 5 VRL = 10 kΩÁÁ

ÁÁÁÁV

O(P

P)






Figure 25

100f – Frequency – Hz

30

1 M0

5

10

15

20

25

1 k 10 k 100 k

MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGEvs

FREQUENCY

ÁÁÁÁÁÁÁÁÁÁÁÁTA = 25°C

VCC ± = ± 15 VRL = 10 kΩ

VO

PP

– M

axim

um

Pea

k-to

-Pea

k O

utp

ut

Vo

ltag

e –

V

ÁÁÁÁÁÁÁÁ

V O(P

P)

ÏÏÏÏÏÏÏÏÏÏ

VCC± = ±15 V

ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ

RL = 10 kΩCL = 30 pFTA = 25°C

Ph

ase

Sh

iftAVD

180°

60°

200°

160°

140°

120°

100°

80°100

80

60

40

20

0

1 M100 k10 k1 k100–20

10 M

120

f – Frequency – Hz10

LARGE-SIGNAL DIFFERENTIAL VOLTAGEAMPLIFICATION AND PHASE SHIFT

vsFREQUENCY


Phase Shift

VCC = 5 V

– L

arg

e-S

ign

al D

iffe

ren

tial

AV

D Vo

ltag

e A

mp

lific

atio

n –

dB

Figure 26




Figure 27

RL = 10 kΩ

ÏÏÏÏÏÏÏÏ

VCC = 5 V

6

4

2

1007550250–25–500

125

10


–75

ÏÏÏÏÏÏÏÏÏÏÏÏ

VCC± = ±15 V

Vµ

V/

Vo

ltag

e A

mp

lific

atio

n –

8

– L

arg

e-S

ign

al D

iffe

ren

tial

AV

D

TLE2021LARGE-SCALE DIFFERENTIAL VOLTAGE

AMPLIFICATION†


Figure 28


1250

–50 –25 0 25 50 75 100

1

VCC = 5 V

VCC± = ±15 V

RL = 10 kΩ

2

3

4

5

6

AV

D –

Lar

ge-

Sig

nal

Dif

fere

nti

alÁÁÁÁÁÁ

AV

DV

olt

age

Am

plif

icat

ion

– V

/µV

TLE2022LARGE-SIGNAL DIFFERENTIAL VOLTAGE

AMPLIFICATION†


Figure 29

VCC± = ±5 V

6

4

2

1007550250–25–500

125

10


–75


VCC± = ±15 V


RL = 10 kΩ

Vµ

V/

Vo

ltag

e A

mp

lific

atio

n –

8

A–

Lar

ge-

Sig

nal

Dif

fere

nti

alV

D

TLE2024LARGE-SCALE DIFFERENTIAL VOLTAGE

AMPLIFICATION†


Figure 30

ÏÏÏÏÏVID = 100 mV

TA = 25°C

VID = –100 mV

VO = 08

6

4

2

0

–2

–4

–6

–8

1412108642–10

16

10

|VCC±| – Supply Voltage – V

IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA

0

ÁÁÁÁ

OS

I

TLE2021SHORT-CIRCUIT OUTPUT CURRENT

vsSUPPLY VOLTAGE






Figure 31

0

IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA


15

16–15

2 4 6 8 10 12 14

VO = 0TA = 25°C

VID = 100 mV–10

–5

0

5

10

I OS

ÏÏÏÏÏVID = –100 mV

TLE2022 AND TLE2024SHORT-CIRCUIT OUTPUT CURRENT

vsSUPPLY VOLTAGE

Figure 32

VO = VCC

TA = 25°C

VID = 100 mV

VID = –100 mV

VO = 0

8

4

0

–4

–8

252015105– 12

30

12

VCC – Supply Voltage – V0

IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA

ÁÁÁÁÁÁ

OS

I

TLE2021SHORT-CIRCUIT OUTPUT CURRENT

vsSUPPLY VOLTAGE

Figure 33

0

IOS

– S

ho

rt-C

ircu

it O

utp

ut

CU

rren

t –

mA

VCC – Supply Voltage – V

15

30–15

–10

–5

0

5

10

ÏÏÏÏÏÏÏÏ

TA = 25°C

VID = –100 mV

VID = 100 mV

252015105

VO = VCC

VO = 0

I OS

TLE2022 AND TLE2024SHORT-CIRCUIT OUTPUT CURRENT

vsSUPPLY VOLTAGE

Figure 34

– 75

8

125– 8

– 50 – 25 0 25 50 75 100

– 6

– 4

– 2

0

2

4

6

VID = –100 mV

VCC = 5 V

VID = 100 mVVO = 0

VO = 5 V


IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA

ÁÁÁÁ

OS

I

TLE2021SHORT-CIRCUIT OUTPUT CURRENT†






Figure 35

–75

6

125–10

–50 –25 0 25 50 75 100

–8

–6

–4

–2

0

2

4VID = –100 mVVCC = 5 V

VO = 5 V

TA – Free-Air Temperature –°C

IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA

I OS

ÏÏÏÏÏVID = 100 mVÏÏÏÏÏÏ

VO = 0

TLE2022 AND TLE2024SHORT-CIRCUIT OUTPUT CURRENT†


Figure 36

–75

IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA


12

125–12

–50 –25 0 25 50 75 100

–8

–4

0

4

8VO = 0

VCC± = ±15 V

VID = –100 mV

VID = 100 mVÁÁÁÁ

OS

I

TLE2021SHORT-CIRCUIT OUTPUT CURRENT†


Figure 37

–75


15

125–15

–10

–5

0

5

10VO = 0

VID = –100 mV

VID = 100 mV

VCC± = ±15 V

IOS

– S

ho

rt-C

ircu

it O

utp

ut

Cu

rren

t –

mA

–50 –25 0 25 50 75 100

I OS

TLE2022 AND TLE2024SHORT-CIRCUIT OUTPUT CURRENT†


Figure 38

0

ICC

– S

up

ply

Cu

rren

t –

ua


250

160

50

100

150

200

2 4 6 8 10 12 14

VO = 0No Load

ÁÁÁÁ

CC

IA

µ

ÏÏÏÏÏÏÏÏ

TA = 25°C

ÏÏÏÏÏÏÏÏTA = 125°C

ÏÏÏÏÏÏÏÏ

TA = –55°C

TLE2021SUPPLY CURRENT

vsSUPPLY VOLTAGE






Figure 39

0

ICC

– S

up

ply

Cu

rren

t –

ua

|VCC±| – Supply Voltage – V162 4 6 8 10 12 14

VO = 0No Load

TA = 25°C

TA = 125°CTA = –55°C

100

200

300

400

0

500

ÁÁÁÁÁÁ

CC

IA

µ


vsSUPPLY VOLTAGE

Figure 40

0


162 4 6 8 10 12 14

VO = 0

No Load

200

400

600

800

0

1000

TA = 25°C

ÏÏÏÏTA = 125°C

TA = –55°C

– S

up

ply

Cu

rren

t –

µA

I CC


vsSUPPLY VOLTAGE

Figure 41

–75

225

1250

25

50

75

100

125

150

175

200

–50 –25 0 25 50 75 100TA – Free-Air Temperature – °C

No Load

VO = 0


VCC± = ± 2.5 V


VCC± = ±15 V

ICC

– S

up

ply

Cu

rren

t –

ua

ÁÁÁÁ

CC

IA

µ

TLE2021SUPPLY CURRENT†


Figure 42

–75

500

1250

–50 –25 0 25 50 75 100

VCC± = ±15 V

VCC± = ±2.5 V


No LoadVO = 0

400

300

200

100

ICC

– S

up

ply

Cu

rren

t –

ua

ÁÁÁÁ

CC

IA

µ







Figure 43

–75 125–50 –25 0 25 50 75 100


1000

0

800

600

400

200


VCC± = ±15 V

ÏÏÏÏÏVCC± = ±2.5 V

VO = 0

No Load

– S

up

ply

Cu

rren

t –

µA

I CC



Figure 44

TA = 25°C


VCC = 5 V


VCC± = ±15 V

100

80

60

40

20

1 M100 k10 k1 k1000

10 M

120


CM

RR

– C

om

mo

n-M

od

e R

ejec

tio

n R

atio

– d

B

10

TLE2021COMMON-MODE REJECTION RATIO

vsFREQUENCY

Figure 45

10

CM

RR

– C

om

mo

n-M

od

e R

ehec

tio

n R

atio

– d

B


120

10 M0

100 1 k 10 k 100 k 1 M

20

40

60

80

100

VCC± = ±15 V

VCC = 5 V

ÏÏÏÏÏÏTA = 25°C


vsFREQUENCY

Figure 46

10

CM

RR

– C

om

mo

n-M

od

e R

ejec

tio

n R

atio

– d

B


120

10 M0

100 1 k 10 k 100 k 1 M

20

40

60

80

100

ÏÏÏÏÏÏÏÏ

VCC = 5 V

TA = 25°C


VCC± = ±15 V


vsFREQUENCY






Figure 47

See Figure 1

RL = 20 kΩCL = 30 pF

0.8

0.6

0.4

0.2

1007550250–25–500

125

1


SR

– S

lew

Rat

e –

V/u

s

–75

sµ


VCC± = ±15 V


VCC = 5 V

TLE2021SLEW RATE†


Figure 48

–75

SR

– S

lew

Rat

e –

V/ u

s


1

1250

–50 –25 0 25 50 75 100

0.2

0.4

0.6

0.8VCC± = ±15 V

VCC = 5 V

CL = 30 pFRL = 20 kΩ

See Figure 1s

µ

TLE2022SLEW RATE†


Figure 49

–75

SR

– S

lew

Rat

e –

V/s


1

1250

–50 –25 0 25 50 75 100

0.2

0.4

0.6

0.8

CL = 30 pFRL = 20 kΩ

See Figure 1

ÏÏÏÏÏVCC± = ±15 V

VCC = 5 V

sµ

V/

TLE2024SLEW RATE†


Figure 50


See Figure 4TA = 25°CCL = 30 pFRL = 10 kΩVCC± = ±15 V

50

0

–50

6040200–100

80

100

t – Time – µs

VO

– O

utp

ut

Vo

ltag

e –

mV

VOLTAGE-FOLLOWERSMALL-SIGNAL

PULSE RESPONSE

ÁÁÁÁ

VO





Figure 51

TA = 25°CCL = 30 pF

ÏÏÏÏÏSee Figure 4

RL = 10 kΩ

t – Time – µs

VCC = 5 V

2.5

60402002.4

80

2.6

VOLTAGE-FOLLOWERSMALL-SIGNAL

PULSE RESPONSE

VO

– O

utp

ut

Vo

ltag

e –

V

ÁÁÁÁÁÁ

VO

2.55

2.45

Figure 52t – Time – µs

4

800

0 20 40 60

1

2

3

VCC = 5 VRL = 10 kΩCL = 30 pFTA = 25°C


See Figure 1

VO

– O

utp

ut

Vo

ltag

e –

V

ÁÁÁÁV

O

TLE2021VOLTAGE-FOLLOWER LARGE-SIGNAL

PULSE RESPONSE


4

800

0 20 40 60

1

2

3

VCC = 5 VRL = 10 kΩCL = 30 pFTA = 25°CSee Figure 1

VO

– O

utp

ut

Vo

ltag

e –

V

ÁÁÁÁÁÁ

VO


PULSE RESPONSE


4

800

0 20 40 60

1

2

3

ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ

VCC± = 5 VRL = 10 kΩCL = 30 pFTA = 25°CSee Figure 1

VO

– O

utp

ut

Vo

ltag

e –

VV O

TLE2024VOLTAGE-FOLLOWER LARGE-SCALE

PULSE RESPONSE





Figure 55

VO

– O

utp

ut

Vo

ltag

e –

V

t – Time – µs

15

80–15

0 20 40 60

–10

– 5

0

5

10

VCC± = ±15 VRL = 10 kΩCL = 30 pFTA = 25°CSee Figure 1

ÁÁÁÁV

O


PULSE RESPONSE

Figure 56

VO

– O

utp

ut

Vo

ltag

e –

V

t – Time – µs

15

80–15

0 20 40 60

–10

–5

0

5

10



ÁÁÁÁV

O


PULSE RESPONSE

Figure 57

VO

– O

utp

ut

Vo

ltag

e –

V

t – Time – µs

15

80–15

0 20 40 60

–10

–5

0

5

10

ÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏÏ


V O


PULSE RESPONSE

Figure 58

0

0.5

10– 0.5

1 2 3 4 5 6 7 8 9

– 0.4

– 0.3

– 0.2

– 0.1

0

0.1

0.2

0.3

0.4

t – Time – s


VCC± = ±15 V

TA = 25°C

PEAK-TO-PEAK EQUIVALENTINPUT NOISE VOLTAGE

0.1 TO 1 Hz

VN

PP

– P

eak-

to-P

eak

Eq

uiv

alen

t In

pu

t N

ois

e V

olt

age

– u

V Vµ

ÁÁÁÁÁÁ

V N(P

P)




Figure 59t – Time – s

0.4

0.3

0.2

0.1

0

– 0.1

– 0.2

– 0.3

– 0.4

– 0.5

0.5

987654321 100

VCC± = ±15 V

TA = 25°C

PEAK-TO-PEAK EQUIVALENTINPUT NOISE VOLTAGE

0.1 TO 10 Hz

VN

PP

– P

eak-

to-P

eak

Eq

uiv

alen

t In

pu

t N

ois

e V

olt

age

– u

V Vµ

ÁÁÁÁÁÁÁÁÁ

V N(P

P)

Figure 60

1

Vn

– E

qu

ival

ent

Inp

ut

No

ise

Vo

ltag

e –

nV

Hz


200

10 k0

40

80

120

160

10 100 1 k

EQUIVALENT INPUT NOISE VOLTAGEvs

FREQUENCY

Vn

ÁÁÁÁÁÁ

nV

/H

z ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ


VCC± = ±15 VRS = 20 Ω

ÏÏÏÏTA = 25°CÏÏÏÏÏÏÏÏÏÏ

See Figure 2

Figure 61

0

B1

– U

nit

y-G

ain

Ban

dw

idth

– M

Hz

4

160

2 4 6 8 10 12 14

1

2

3See Figure 3TA = 25°CCL = 30 pFRL = 10 kΩ

B1


TLE2021UNITY-GAIN BANDWIDTH

vsSUPPLY VOLTAGE

Figure 62

3

2

1

14121086420

16

4


B1

– U

nit

y-G

ain

Ban

dw

idth

– M

Hz

0

B1

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

RL = 10 kΩCL = 30 pFTA = 25°CSee Figure 3

TLE2022 AND TLE2024UNITY-GAIN BANDWIDTH

vsSUPPLY VOLTAGE





Figure 63

–75

B1

– U

nit

y-G

ain

Ban

dw

idth

– M

Hz


4

1250

–50 –25 0 25 50 75 100

1

2

3

See Figure 3CL = 30 pF

RL = 10 kΩ

VCC± = ±15 V

ÏÏÏÏÏVCC = 5 VB1

TLE2021UNITY-GAIN BANDWIDTH†


Figure 64

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

VCC = 5 V

3

2

1

1007550250–25–500

125

4

TA – Free-Air Temperature – °C–75

RL = 10 kΩCL = 30 pFSee Figure 3


VCC± = ±15 V

B1

– U

nit

y-G

ain

Ban

dw

idth

– M

Hz

B1

TLE2022 AND TLE2024UNITY-GAIN BANDWIDTH†


Figure 65

0

m –

Ph

ase

Mar

gin

50°

1640°

2 4 6 8 10 12 14

42°

44°

46°

48°


RL = 10 kΩCL = 30 pFTA = 25°CSee Figure 3

ÁÁÁÁ

mφ

TLE2021PHASE MARGIN

vsSUPPLY VOLTAGE

Figure 66

53°

51°

49°

47°

141210864245°

16

55°

m –

Ph

ase

Mar

gin

0|VCC±| – Supply Voltage – V

ÁÁÁÁ

mφ

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

See Figure 3TA = 25°CCL = 30 pFRL = 10 kΩ

TLE2022 AND TLE2024PHASE MARGIN

vsSUPPLY VOLTAGE





Figure 67

0CL – Load Capacitance – pF

60°

1000

20 40 60 80

10°

20°

30°

40°

50°

RL = 10 kΩTA = 30 pFSee Figure 3

VCC± = ±15 V

VCC = 5 V

m –

Ph

ase

Mar

gin

ÁÁÁÁÁÁ

mφ

TLE2021PHASE MARGIN

vsLOAD CAPACITANCE

Figure 68

ÁÁÁÁÁÁÁÁÁÁÁÁ

80604020

VCC = 5 V

See Figure 3TA = 25°CRL = 10 kΩ

60°

50°

40°

30°

20°

10°

0°100

70°

CL – Load Capacitance – pF

m –

Ph

ase

Mar

gin

0

ÁÁÁÁ

mφ

VCC± = ±15 V

TLE2022 AND TLE2024PHASE MARGIN

vsLOAD CAPACITANCE

Figure 69

–75

m –

Ph

ase

Mar

gin


50°

12536°

–50 –25 0 25 50 75 100

38°

40°

42°

44°

46°

48°

RL = 10 kΩCL = 30 pFSee Figure 3

VCC± = ±15 V

VCC = 5 V

ÁÁ

mφ

TLE2021PHASE MARGIN†


Figure 70

42°

1007550250–25–50

VCC = 5 V

VCC± = ±15 V

52°

50°

48°

46°

44°

40°125

54°

TA – Free-Air Temperature – °C–75

m –

Ph

ase

Mar

gin

ÁÁÁÁ

mφ

ÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁÁ

See Figure 3CL = 30 pFRL = 10 kΩ

TLE2022 AND TLE2024PHASE MARGIN†






APPLICATION INFORMATION

voltage-follower applications

The TLE202x circuitry includes input-protection diodes to limit the voltage across the input transistors; however,no provision is made in the circuit to limit the current if these diodes are forward biased. This condition can occurwhen the device is operated in the voltage-follower configuration and driven with a fast, large-signal pulse. Itis recommended that a feedback resistor be used to limit the current to a maximum of 1 mA to preventdegradation of the device. This feedback resistor forms a pole with the input capacitance of the device. Forfeedback resistor values greater than 10 kΩ, this pole degrades the amplifier phase margin. This problem canbe alleviated by adding a capacitor (20 pF to 50 pF) in parallel with the feedback resistor (see Figure 71).

CF = 20 pF to 50 pF

IF ≤ 1 mA

RF

VCC+

VCC–

VO

VI

–

+

Figure 71. Voltage Follower

Input offset voltage nulling

The TLE202x series offers external null pins that further reduce the input offset voltage. The circuit inFigure 72 can be connected as shown if this feature is desired. When external nulling is not needed, the nullpins may be left disconnected.

1 kΩ GND (single supply)

VCC – (split supply)

5 kΩ

OFFSET N2

–

+

OFFSET N1

IN –

IN +

Figure 72. Input Offset Voltage Null Circuit



APPLICATION INFORMATION

macromodel information

Macromodel information provided was derived using Microsim Parts , the model generation software usedwith Microsim PSpice . The Boyle macromodel (see Note 5) and subcircuit in Figure 73, Figure 74, and Figure75 were generated using the TLE202x typical electrical and operating characteristics at 25°C. Using thisinformation, output simulations of the following key parameters can be generated to a tolerance of 20% (in mostcases):

Unity-gain frequency Common-mode rejection ratio Phase margin DC output resistance AC output resistance Short-circuit output current limit

Maximum positive output voltage swing Maximum negative output voltage swing Slew rate Quiescent power dissipation Input bias current Open-loop voltage amplification

NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journalof Solid-State Circuits, SC-9, 353 (1974).

OUT

+

–

+

–

+

–

+

–+

–

+

– +

–

+–

VCC+

rp

IN–

2IN+

1

VCC–

rc1

11

Q1 Q2

13

cee Iee

3

12

rc2

ve

54de

dp

vc

dc

4

C1

53

r2

6

9

egnd

vb

fb

C2

gcm gavlim

8

5ro1

ro2

hlim

90

dip

91

din92

vinvip

99

7

ree

14

re1 re2

Figure 73. Boyle Subcircuit

PSpice and Parts are trademarks of MicroSim Corporation.




.SUBCKT TLE2021 1 2 3 4 5*

c1 11 12 6.244E–12c2 6 7 13.4E–12c3 87 0 10.64E–9cpsr 85 86 15.9E–9dcm+ 81 82 dxdcm– 83 81 dxdc 5 53 dxde 54 5 dxdlp 90 91 dxdln 92 90 dxdp 4 3 dxecmr 84 99 (2 99) 1egnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5epsr 85 0 poly(1) (3,4) –60E–6 2.0E–6ense 89 2 poly(1) (88,0) 120E–6 1fb 7 99 poly(6) vb vc ve vlp vln vpsr 0 547.3E6+ –50E7 50E7 50E7 –50E7 547E6ga 6 0 11 12 188.5E–6gcm 0 6 10 99 335.2E–12gpsr 85 86 (85,86) 100E–6grc1 4 11 (4,11) 1.885E–4grc2 4 12 (4,12) 1.885E–4gre1 13 10 (13,10) 6.82E–4gre2 14 10 (14,10) 6.82E–4hlim 90 0 vlim 1k

hcmr 80 1 poly(2) vcm+ vcm– 0 1E2 1E2irp 3 4 185E–6iee 3 10 dc 15.67E–6iio 2 0 2E–9i1 88 0 1E–21q1 11 89 13 qxq2 12 80 14 qxR2 6 9 100.0E3rcm 84 81 1Kree 10 99 14.76E6rn1 87 0 2.55E8rn2 87 88 11.67E3ro1 8 5 62ro2 7 99 63vcm+ 82 99 13.3vcm– 83 99 –14.6vb 9 0 dc 0vc 3 53 dc 1.300ve 54 4 dc 1.500vlim 7 8 dc 0vlp 91 0 dc 3.600vln 0 92 dc 3.600vpsr 0 86 dc 0

.model dx d(is=800.0E–18)

.model qx pnp(is=800.0E–18 bf=270)

.ends

Figure 74. Boyle Macromodel for the TLE2021

.SUBCKT TLE2022 1 2 3 4 5*c1 11 12 6.814E–12c2 6 7 20.00E–12dc 5 53 dxde 54 5 dxdlp 90 91 dxdln 92 90 dxdp 4 3 dxegnd 99 0 poly(2) (3,0) (4,0) 0 .5 .5fb 7 99 poly(5) vb vc ve vlp vln 0

+ 45.47E6 –50E6 50E6 50E6 –50E6ga 6 0 11 12 377.9E–6gcm 0 6 10 99 7.84E–10iee 3 10 DC 18.07E–6hlim 90 0 vlim 1kq1 11 2 13 qxq2 12 1 14 qxr2 6 9 100.0E3

rc1 4 11 2.842E3rc2 4 12 2.842E3ge1 13 10 (10,13) 31.299E–3ge2 14 10 (10,14) 31.299E–3ree 10 99 11.07E6ro1 8 5 250ro2 7 99 250rp 3 4 137.2E3vb 9 0 dc 0vc 3 53 dc 1.300ve 54 4 dc 1.500vlim 7 8 dc 0vlp 91 0 dc 3vln 0 92 dc 3

.model dx d(is=800.0E–18)

.model qx pnp(is=800.0E–18 bf=257.1)

.ends

Figure 75. Boyle Macromodel for the TLE2022



MECHANICAL INFORMATIOND (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE14 PIN SHOWN

4040047/B 03/95

0.228 (5,80)0.244 (6,20)

0.069 (1,75) MAX0.010 (0,25)0.004 (0,10)

1

14

0.014 (0,35)0.020 (0,51)

A

0.157 (4,00)0.150 (3,81)

7

8

0.044 (1,12)0.016 (0,40)

Seating Plane

0.010 (0,25)

PINS **

0.008 (0,20) NOM

A MIN

A MAX

DIM

Gage Plane

0.189(4,80)

(5,00)0.197

8

(8,55)

(8,75)

0.337

14

0.344

(9,80)

16

0.394(10,00)

0.386

0.004 (0,10)

M0.010 (0,25)

0.050 (1,27)

0°–8°

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. Body dimensions do not include mold flash or protrusion, not to exceed 0.006 (0,15).D. Four center pins are connected to die mount pad.E. Falls within JEDEC MS-012




MECHANICAL INFORMATIONDB (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

4040065 /C 10/95

28 PIN SHOWN

Gage Plane

8,207,40

0,15 NOM

0,631,03

0,25

38

12,90

12,30

28

10,50

24

8,50

Seating Plane

9,907,90

30

10,50

9,90

0,38

5,605,00

15

0,22

14

A

28

1

2016

6,506,50

14

0,05 MIN

5,905,90

DIM

A MAX

A MIN

PINS **

2,00 MAX

6,90

7,50

0,65 M0,15

0°–8°

0,10

3,30

8

2,70

NOTES: A. All linear dimensions are in millimeters.B. This drawing is subject to change without notice.C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.D. Falls within JEDEC MO-150



MECHANICAL INFORMATIONDW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE16 PIN SHOWN

4040000/B 03/95

Seating Plane

0.400 (10,15)0.419 (10,65)

0.104 (2,65) MAX

1

0.012 (0,30)0.004 (0,10)

A

8

16

0.020 (0,51)0.014 (0,35)

0.293 (7,45)0.299 (7,59)

9

0.010 (0,25)

0.050 (1,27)0.016 (0,40)

(15,24)

(15,49)

PINS **

0.010 (0,25) NOM

A MAX

DIM

A MIN

Gage Plane

20

0.500(12,70)

(12,95)0.510

(10,16)

(10,41)

0.400

0.410

16

0.600

24

0.610

(17,78)

28

0.700

(18,03)0.710

0.004 (0,10)

M0.010 (0,25)

0.050 (1,27)

0°–8°

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. Body dimensions do not include mold flash or protrusion not to exceed 0.006 (0,15).D. Falls within JEDEC MS-013




MECHANICAL INFORMATIONFK (S-CQCC-N**) LEADLESS CERAMIC CHIP CARRIER

4040140/D 10/96

28 TERMINAL SHOWN

B

0.358(9,09)

MAX

(11,63)

0.560(14,22)

0.560

0.458

0.858(21,8)

1.063(27,0)

(14,22)

ANO. OF

MINMAX

0.358

0.660

0.761

0.458

0.342(8,69)

MIN

(11,23)

(16,26)0.640

0.739

0.442

(9,09)

(11,63)

(16,76)

0.962

1.165

(23,83)0.938

(28,99)1.141

(24,43)

(29,59)

(19,32)(18,78)

**

20

28

52

44

68

84

0.020 (0,51)

TERMINALS

0.080 (2,03)0.064 (1,63)

(7,80)0.307

(10,31)0.406

(12,58)0.495

(12,58)0.495

(21,6)0.850

(26,6)1.047

0.045 (1,14)

0.045 (1,14)0.035 (0,89)

0.035 (0,89)

0.010 (0,25)

121314151618 17

11

10

8

9

7

5

432

0.020 (0,51)0.010 (0,25)

6

12826 27

19

21B SQ

A SQ22

23

24

25

20

0.055 (1,40)0.045 (1,14)

0.028 (0,71)0.022 (0,54)

0.050 (1,27)

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. This package can be hermetically sealed with a metal lid.D. The terminals are gold plated.E. Falls within JEDEC MS-004



MECHANICAL INFORMATIONJ (R-GDIP-T**) CERAMIC DUAL-IN-LINE PACKAGE

4040083/B 04/95

14 PIN SHOWN

22

0.410(10,41)

0.390

(28,00)1.100

(9,91)

0.388(9,65)

20181614PINS **

0.310(7,87)

0.290

0.755(19,18)

(19,94)0.785

(7,37)

0.310(7,87)

(7,37)0.290

(23,10)0.910

0.300(7,62)

(6,22)0.245

A

0.300(7,62)

(6,22)0.245

0.290

(7,87)0.310

0.785(19,94)

(19,18)0.755

(7,37)A MIN

A MAX

B MAX

B MIN

0.245(6,22)

(7,11)0.280

C MIN

C MAX

DIM

0.245(6,22)

(7,62)0.300

0.975(24,77)

(23,62)0.930

0.290(7,37)

(7,87)0.310

Seating Plane

0.014 (0,36)0.008 (0,20)

C

8

7

0.020 (0,51) MIN

B

0.070 (1,78)0.100 (2,54)

0.065 (1,65)0.045 (1,14)

14

1

0.015 (0,38)0.023 (0,58)

0.200 (5,08) MAX

0.130 (3,30) MIN

0.100 (2,54)0°–15°

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. This package can be hermetically sealed with a ceramic lid using glass frit.D. Index point is provided on cap for terminal identification only on press ceramic glass frit seal only.E. Falls within MIL-STD-1835 GDIP1-T14, GDIP1-T16, GDIP1-T18, GDIP1-T20, and GDIP1-T22




MECHANICAL INFORMATIONJG (R-GDIP-T8) CERAMIC DUAL-IN-LINE PACKAGE

4040107/B 04/95

0.020 (0,51) MIN

0.200 (5,08) MAX

0.130 (3,30) MIN

1 4

58

0°–15°

0.008 (0,20)

0.310 (7,87)0.290 (7,37)

0.245 (6,22)0.280 (7,11)

Seating Plane

0.015 (0,38)0.015 (0,38)0.023 (0,58)

0.400 (10,20)0.355 (9,00)

0.063 (1,60)0.015 (0,38)

0.065 (1,65)0.045 (1,14)

0.100 (2,54)

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. This package can be hermetically sealed with a ceramic lid using glass frit.D. Index point is provided on cap for terminal identification only on press ceramic glass frit seal onlyE. Falls within MIL-STD-1835 GDIP1-T8



MECHANICAL INFORMATIONN (R-PDIP-T**) PLASTIC DUAL-IN-LINE PACKAGE

20

0.975(24,77)

0.940(23,88)

18

0.920

0.850

14

0.775

0.745

(19,69)

(18,92)

16

0.775(19,69)

(18,92)0.745

A MIN

DIM

A MAX

PINS **

0.310 (7,87)0.290 (7,37)

(23.37)

(21.59)

Seating Plane

0.010 (0,25) NOM

14/18 PIN ONLY

4040049/C 08/95

9

8

0.070 (1,78) MAX

A

0.035 (0,89) MAX 0.020 (0,51) MIN

16

1

0.015 (0,38)0.021 (0,53)

0.200 (5,08) MAX

0.125 (3,18) MIN

0.240 (6,10)0.260 (6,60)

M0.010 (0,25)

0.100 (2,54)0°–15°

16 PIN SHOWN

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. Falls within JEDEC MS-001 (20 pin package is shorter then MS-001.)




MECHANICAL INFORMATIONP (R-PDIP-T8) PLASTIC DUAL-IN-LINE PACKAGE

4040082/B 03/95

0.310 (7,87)0.290 (7,37)

0.010 (0,25) NOM

0.400 (10,60)0.355 (9,02)

58

41

0.020 (0,51) MIN

0.070 (1,78) MAX

0.240 (6,10)0.260 (6,60)

0.200 (5,08) MAX

0.125 (3,18) MIN

0.015 (0,38)0.021 (0,53)

Seating Plane

M0.010 (0,25)

0.100 (2,54) 0°–15°

NOTES: A. All linear dimensions are in inches (millimeters).B. This drawing is subject to change without notice.C. Falls within JEDEC MS-001



MECHANICAL INFORMATIONPW (R-PDSO-G**) PLASTIC SMALL-OUTLINE PACKAGE

4040064/D 10/95

14 PIN SHOWN

Seating Plane

0,10 MIN1,20 MAX

1

A

7

14

0,19

4,504,30

8

6,106,70

0,32

0,750,50

0,25

Gage Plane

0,15 NOM

0,65 M0,13

0°–8°

0,10

PINS **

A MIN

A MAX

DIM

2,90

3,10

8

4,90

5,10

14

6,60

6,404,90

5,10

16

7,70

20

7,90

24

9,60

9,80

28

NOTES: A. All linear dimensions are in millimeters.B. This drawing is subject to change without notice.C. Body dimensions do not include mold flash or protrusion not to exceed 0,15.D. Falls within JEDEC MO-153

IMPORTANT NOTICE

Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications,enhancements, improvements, and other changes to its products and services at any time and to discontinueany product or service without notice. Customers should obtain the latest relevant information before placingorders and should verify that such information is current and complete. All products are sold subject to TI’s termsand conditions of sale supplied at the time of order acknowledgment.

TI warrants performance of its hardware products to the specifications applicable at the time of sale inaccordance with TI’s standard warranty. Testing and other quality control techniques are used to the extent TIdeems necessary to support this warranty. Except where mandated by government requirements, testing of allparameters of each product is not necessarily performed.

TI assumes no liability for applications assistance or customer product design. Customers are responsible fortheir products and applications using TI components. To minimize the risks associated with customer productsand applications, customers should provide adequate design and operating safeguards.

TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right,copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or processin which TI products or services are used. Information published by TI regarding third–party products or servicesdoes not constitute a license from TI to use such products or services or a warranty or endorsement thereof.Use of such information may require a license from a third party under the patents or other intellectual propertyof the third party, or a license from TI under the patents or other intellectual property of TI.

Reproduction of information in TI data books or data sheets is permissible only if reproduction is withoutalteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproductionof this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable forsuch altered documentation.

Resale of TI products or services with statements different from or beyond the parameters stated by TI for thatproduct or service voids all express and any implied warranties for the associated TI product or service andis an unfair and deceptive business practice. TI is not responsible or liable for any such statements.

Mailing Address:

Texas InstrumentsPost Office Box 655303Dallas, Texas 75265

Copyright 2002, Texas Instruments Incorporated

Documents

Excalibur High-Speed Low-Power Precision …vakits.com/sites/default/files/tle2021.pdfusing a new texas instruments ... excalibur high-speed low-power precision operational ... excalibur