SOLTEQ®

FLOW OVER WEIRSMODEL: FM 26

THIS Flow Over Weirs (Model: FM 26) apparatus comes with two weir plates of different shapes, thus

allowing familiarisation and comparison with theory. The unit consists of the following used in conjunction

with the flow channel in the moulded bench top of a Hydraulics Bench:

a) A quick release connector in the base of the

channel is unscrewed and a delivery nozzle

screwed in its place.

b) A stilling baffle locates into slots in the walls of the

channel. The inlet nozzle and stilling baffle in

combination promote smooth flow conditions in

the channel.

c) A Vernier hook and point gauge is mounted on an

instrument carrier which is located on the side

channels of the moulded top. The carrier may be

moved along the channels to the required

measurement position.

d) The rectangular notch weir or vee (V) notch weir

to be tested is clamped to the weir carrier in the

channel by thumb nuts. The weir plates incorporate

captive studs to aid assembly.

Equipment for Engineering Education & Research

SOLTEQ

EXPERIMENTAL CAPABILITIES

♦ Flow characteristics demonstration over a

rectangular notch and a vee (V) notch.

♦ Determination of the discharge coefficients.

SPECIFICATIONS

Weir Plates:

Height : 160 mm

Width : 230 mm

Thickness : 4 mm

Rectangular Notch:

Height : 82 mm

Width : 30 mm

Angle of vee notch weir : 90° inclusive

Hook & point gauge : 0 to 150 mm, ±0.1 mm

REQUIREMENTS

Hydraulics Bench ( FM 110 )

SOLTEQ®Equipment for Engineering Education & Research

Our range of teaching equipment can be complemented with our

SOLDAS and SOLCAL software.

SOFTWARE & E - LEARNING

SOLDAS® - Supervisory Control & Data Acquisition

- Data Logging

- Signal Analysis

- Process Control

- Real-Time Display

- Tabulated Results

- Graph of Experimental Results

SOLCAL® - Computer Aided Learning

- Multimedia Features

- Interactive

- Graphic Simulation

- Experiment Result Samples

- Full Experiment Manuals

SOLTEQ®

Contact us for a catalog CD

SOLUTION ENGINEERING SDN. BHD.(Co. No. 174876-M)

Sales Office :

No.3, Jalan TPK 2/4, Taman Perindustrian Kinrara,47100 Puchong, Selangor Darul Ehsan, Malaysia.Tel. No. : +(603) 80758000Fax. No. : +(603) 80755784

R&D Office :

G-2A, Incubator 3, Technology Park Malaysia,Bukit Jalil, 57000 Kuala Lumpur, Malaysia.Tel. No. : +(603) 8996 0023

Email : solution@solution.com.myWeb site : http//www.solution.com.my/

AGENT:

Equipment for Engineering Education & Research

BUATAN MALAYSIA

MSC- StatusCompany