www.temasinergie.com

ENVIROENVIRONMENTAL MONITORING NET

THE SIMPLEST SYSTEM TO HAVEEVERYTHING WELL IN HAND.

ENVIRO IS THE EASIEST COMPLETE REAL TIME MONITORING SYSTEM FOR THE DETECTION AND MEASUREMENT OF:

ENVIROENVIRONMENTAL MONITORING NET

READY-MADEEASY TO INSTALLENVIRO is a system that stands out for its fast production and easy installation. It doesn’t require any dedicated/additional wiring, being it connected through Ethernet network.

USER FRIENDLYEASY TO USE

The ENVIRO central unit consists of an industrial PC Windows CE. The operator can change and check all of the parameters through the touch screen. ENVIRO is equipped with a 3.5” display for status, alarms and data visualization.ENVIRO can be provided with user-friendly GAMP5 & 21 CFR pt. 11 compliant software.

EASY TO CLEANIts design was specifically studied to fulfill all of the decontamination and cleaning requirements in clean rooms.

MODULAREASY TO IMPLEMENTENVIRO can be a stand-alone monitoring station as well as a part of a modular environmental monitoring system integrating all the single units and different types of measurement points.In this way, you can choose with extreme flexibility the best solution to supervise your working areas, in a system easy to increase over time. ENVIRO can also be connected to Tema Sinergie hot cell GM.Upon customer’s request it is possible to expand the ENVIRO with additional signals and probes, creating a complete Environmental Monitoring System.

EASY TO IMPLEMENT. EASY TO INSTALL

EASY TO USE. EASY TO CLEAN

- Environment radiation: Different probes available (see chart on last page) - Air contamination: ENVIRO-AIR, E-STACK, E-RAS- Temperature, humidity and pressure: ENVIRO-TU, ENVIRO-P

Performing continuous and simultaneous measurements with no dead times in between makes it a reliable solutionto regulatory, health physics safety and production monitoring for all the radioactive sources handling laboratories.

RADIATION

TEMPERATURE

HUMIDITY

PRESSURE

MORE TO COME

RAD

AIR

TU

P

RAD

AIR

TU

P

CONTROL ROOM

RAD

AIR

TU

P

LABORATORY 3LABORATORY 2LABORATORY 1

ENVIRO - RADDedicated to the on-line real time environmental radiation monitoring of different areas of the lab/facility. Provided with electrical power supply battery backup. Equipped with local touch screen monitor to display status, alarm and measured data. The central unit (Image 1) can connect up to n. 2 probes from the following list:

The central unit is provided with USB connection for data download on any USB pen drive. Its on-board memory can store data for about 3 years.

SPECIFICATIONSPower supply: 90-260 Vac; Frequency: 50-60 Hz; Power consumption: 60 WDimensions: 270 (w) x 120 (d) x 340 (h) mm

OPTIONLight tower (Image 2) in order to improve the visual alarm of the display.

ENVIRO - AIRDedicated to the air radiation monitoring (Image 3). Equipped with:- Measuring probe for air contamination (Bq/cm³)- Continuous and simultaneous measure of the released activity & concentration- Fan for air suction- Internal flow meter for air volume measurement

E-STACK-TReal-time air contamination monitoring system for the stack, provided with:- Dedicated electrical panel- NaI(Tl) crystal probe mounted on the stack in a dedicated case, with anemometer for

calculating the volume of exhaust air- OPTIONAL: photomultiplier and multichannel analyzing system (E-STACK-M)

E-RAS-TRoom air sampling system, provided with:- Dedicated electrical panel- Vacuum pump and suction points (positioned inside the rooms)- NaI(Tl) crystal probe into a dedicated low-background shielding- OPTIONAL: photomultiplier and multichannel analyzing system (OPTION E-RAS M)

ENVIRO - TU Dedicated probe with built-in Temperature and Humidity sensor (Image 5) to monitor environmental parameters (Image 4)

ENVIRO - PDedicated probe with built-in Pressure sensor(Image 5) to monitor environmental parameters (Image 4)

ENVIRO SoftwareThe operator is given a general overview of the sensors, and can also monitor the radioactivity levels and environmental parameters, save the collected data, browse the alarm record, and plan interlock techniques (such as automatic safety operations). The software runs on a PC supplied with 19” monitor and a printer. The software upgrade is free of charge.

FEATURES:- GAMP5 / 21 CFR part 11 compliant- ENVIRO Network supervision- Real time measurement graphics (Image 6)- Measurement database- Statistic elaboration of data- Event log visualization (chronological list of events)- Software automatic recovery after shutdown – no data loss- Reports (with printer connection)- Automatic back-up and access safety policy (password)- 2D map of the Lab for easy probes visualization/localization- Software calibration routine- Connection to Tema hot cell if GM equipped- Ethernet connection for remote support, service and real-time control

by Tema Sinergie technicians.

ENVIROENVIRONMENTAL MONITORING NET

THE SIMPLEST SYSTEM TO HAVEEVERYTHING WELL IN HAND.

REV

. 00

_17

A GM1 = G. M. Tube E GMF = G. M. Tube for exhaust duct

BGM2 = G. M. Tube with extended range (2 probes)

FGME = G. M. Tube for external environment

C BF3 = Neutron detector GGM1-C = G. M. Tube for patient collimator

D TAR = Nal (2” x 2”) scintillator H GMT = G. M. Tube waterproof for tank

1

3

4

5

6

2