ENL Overview - ENL Limited | EN Siteenl.co.uk/enl-pdf-presentation.pdf · Technical Moulding Solutions Manufacturing in both the UK and East Europe Two sites, one management team

ENL Overviewwww.enl.co.uk

Kiln Road, Portsmouth, Hampshire, PO3 5LP© ENL Limited

Technical Moulding Solutions

www.enl.co.uk

1. Overview

Leading European manufacturer of technical plastic mouldings

Exceptional quality underpinned by ISO9001, AS9100 & TS 16949

Value proposition is built on quality and flexibility to our customers


Established for over 50 years, ENL has built an enviable list of blue-chip customers across a range of manufacturing industries from automotive to aerospace.

Strong expertise in design and manufacture of complex parts that use engineered high-performance polymers including overmouldings.

With in-house design and tool manufacturing, ENL provides a value-add service through the complete design lifecycle at the lowest possible cost.

Manufacturing capability delivered through integrated UK and East European manufacturing sites to meet the needs of low through to high volumes.


www.enl.co.uk

European ‘blue-chip’ customer base

Strong experience with automotive, aerospace and a diverse range of manufacturing industries

All depend on quality, value and experience


Our customers choose ENL because of:-

Our experience, expertise and flexible manufacturing 1. options.

Our ability to manage the complete design, tool and 2. manufacture life-cycle.

Our commitment to the highest level of quality.3.

Our ability to minimise the total cost of purchase.4.

Our ability to deliver on-time, every time.5.

2. Customers ENL products feature in the following brands


www.enl.co.uk

Design and tool manufacture in-house

Quick ‘first off the tool’ capability

Optimised cost per part

Complete in-house management of product lifecycle


In-house design of single piece or multi-part assemblies using state-of-the-art design software such as Delcam, ProEngineer and AutoCAD.

Experienced with high-performance polymers such as Ultem, PEEK and Torlon, as well as more standard polymers.

Tool options in fully hardened steel, P20 steel and alumimium either within our UK and Eastern Europe factories or full turnkey project management within Asia.

In house tool maintenance through life of production.

Quick turnaround time for ‘first off the tool’ parts.

Rapid prototyping available for low volume runs.

3. Design & Tooling Capability


www.enl.co.uk

Tools manufactured to European specification

Tools managed with a rigorous control programme

Full on-site inspection during tool trials

Peace of mind with a full UK warranty


ENL control the tooling design and material specification for the whole program.

All tools are manufactured to European standard parts and sizes.

Tool manufacturing program will be supported by a weekly control plan.

All tooling trials and ‘first off the tool’ (FOT) will be supported on-site by our UK tool specialists.

All tools will be inspected and optimised if required.

Tools carry full ENL UK warranty.

4. Tooling Management Programme


www.enl.co.uk

Manufacturing in both the UK and East Europe

Two sites, one management team

Excel at low and high volume requirements

Continual re-investment in state-of-the-art machines


Capability

UK

Slovakia

Moulding

Capacity

Post-ops

Logistics

5. Manufacturing Capability

Insert moulding, moulding, post-production and assembly.

Low - medium volume, value add parts, design and tooling.

High volume.

10 - 830 tonnes machine capacity.

Up to 4000 grams shot, horizontal & vertical feed, split line or conventional.

CNC machining, ultrasonic welding, printing, kitting, assembly.

Seamless execution of inbound and outbound parts/material.

© ENL Limited


www.enl.co.uk

Excellence, as standard

Zero defect culture

ISO9001:2008

Aerospace: AS9100

Automotive:TS16949


6. Quality

ENL manufacture to the very highest levels of quality standards, with approvals covering ISO standards through to aerospace and automotive standards.

We can satisfy virtually any industry’s product approval system.

Our new part introduction system covers the requirements of almost any industry from aerospace FAIR’s through to automotive PPAP’s to the latest AIG guidelines including all standared APQP activities.

The quality process is embedded in both our UK and Slovakian manufacturing sites.

Therefore, no matter where we manufacture your part, the quality remains at the very highest level.

© ENL Limited


www.enl.co.uk

Choose the optimum material

Design the part to minimise production cost

Minimise tool investment over the life of your part

Reduce your supply chain costs


7. Total Cost of Purchase

ENL are specialists in minimising ‘total cost of purchase’.

We offer three key advantages:

- We can optimise the design part, the tool and the production - all managed from one hand.

- Our quality standards mean that parts are delivered to specification, day in day out.

- Our processes ensure we deliver on-time, every time.

European partner with the right experience, the right capability, the right location and right attitude to service: ENL.

ENL will help you:-

1.

2.

3.

4.

ENL LimitedTechnical Moulding Solutions

© ENL Limited

ENL LimitedKiln Road, PortsmouthHampshire, PO3 5LP

Tel: +44 (0)23 9266 8517

Email: [email protected]

www.enl.co.uk

ENL SK s.r.o.J. Hollého 160

922 07 Velké KostolanySlovak Republic

Tel: +421 (0)33 791 0000

Email: [email protected]

www.enl.sk


Documents

ENL Overview - ENL Limited | EN Siteenl.co.uk/enl-pdf-presentation.pdf · Technical Moulding Solutions Manufacturing in both the UK and East Europe Two sites, one management team