Hi-Tech Projects,Dec’16, www.eiriindia.org # 03

PROFITABLE INDUSTRIES FOR YOUP.V.C. INSULATION TAPE

[CODE NO.1912]A major ingredient in vinyl film was tricresylphosphate (TCP), which was used as aplasticizer. Unfortunately, TCP tended tomigrate, giving the surface of the vinyl film anoily quality and degrading every tape adhesiveknown. Research chemists and engineers at3M set out to create a dependable, pressure-sensitive tape made of vinyl film that wouldhave the required electrical, physical andchemical properties. Tapes formulated for high-temperature were yellow, and later versionswere white. White tape, because of its instabilityin ultraviolet light, was eventually replaced withblack tape, although colored vinyl tapes arestill used as identification and marking tapes.Black became the standard industry color forvinyl standard tape, primarily because of itsultraviolet resistance. Thicknesses originallywere 4 mil (100 µm), 8 mil (200 µm) and 12 mil(300 µm). These were standardized to 7 mil(180 µm) and 10 mil (250 µm) in 1948.Electrical tape (or insulating tape) is a type ofpressure-sensitive tape used to insulateelectrical wires and other material that conductelectricity. It can be made of many plastics, butvinyl is most popular, as it stretches well andgives an effective and long lasting insulation.Electrical tape for class H insulation is madeof fiberglass cloth.

COST ESTIMATIONPlant Capacity 5000.00 SQ.MTR/dayLand & Building (5000 Sq.ft) Rs. 2.50 CrPlant & Machinery Rs. 90.00 LacsW.C. for 2 Months Rs 1.49 CrTotal Capital Investment Rs. 4.98 CrRate of Return 43%Break Even Point 34%****************************************************

PACKAGED DRINKING WATERWITH PET BOTTLE

MANUFACTURE (IN 1 LTR PETBOTTLES, 20 LTR JARS & 250ML POUCHES) [CODE 1913]

Water & Air is basic need of life which can notbe avoidable at any circumstances. Throughthese two gifts of nature are freely availablethe quality is far below the level of purity forhuman consumption of pollution. It is needlessto mention that water, a compound of Hydrogenand Oxygen is a recious natural gift which isvery essential for survival of mankind includinganimals. The water used for potable purposesshould be free from undesirable impurities. Thewater available from untreated sources suchas Well, Boreholes and Spring is generally nothygienic and safe for drinking. Thus it isdesirable and necessary to purify the water andsupply under hygienic conditions for humandrinking purpose. As the name implies, themineral water is the purified water fortified withrequisite amounts of minerals such as Barium,Iron, Manganese, etc which can be absorbedby human body. It is either obtained from naturalresources like spring and drilled wells or it isfortified artificially by blending and treating withmineral salts. The mineral water shall be

manufactured and packed under hygienicconditions in properly washed and cleanedbottles in sterilized conditions.

COST ESTIMATIONPlant Capacity 15000.00 LTRS/dayLand & Building (2058 Sq.Mtr) Rs. 2.38 CrPlant & Machinery Rs. 1.35 CrW.C. for 2 Months Rs 2.57 CrTotal Capital Investment Rs. 9.15 CrRate of Return 36%Break Even Point 44%******************************************************

MANUFACTURING HARDBOILED CANDIES, LOLLIPOPS

& BUBBLEGUMS [EIRI-1914]Confectionery or sweetmeats are preservededible delicacies consisting of a solid orcrystalline phase and a liquid or non-crystallinephase the relative propor tion of whichdetermine the type of confectionery. Theprincipal types of confectionery are handboiled goods, caramel and toffee, comfits ordraggees, and lozenges. Sugar is the principalingredient of confectionery. There are about 50important confectionery factories in thecountry. Mainly in U.P. Bihar, Mumbai, Punjab,and Bengal. In addition, a large number ofsmall concerns are producing sugarconfectionery with indigenous equipments. Thecovering of chocolates was originally carriedout solely by hand the process being knownas `hand dipping'. Each piece or `centre' washandled individually, dropped into moltenchocolate (temperature 88- 92 deg.F), covered,and finally placed a plaque to set. The processgave results which even today are superior toany mechanical methods although inproduction to out put, a high cost of labour isinvolved.

COST ESTIMATIONPlant Capacity 1 Ton/DayLand & Building (1200 Sq.Mtr) Rs. 1.03 Cr.Plant & Machinery Rs. 60 LacsW.C. for 2 Months Rs. 83 LacsTotal Capital Investment Rs. 2.57 Cr.Rate of Return 49%Break Even Point 43%******************************************************

KRAFT PAPER FROM WASTEPAPER (100 TPD) [EIRI-1915]

Paper form a commodity of prime importanceto day from the par ts of view of masscommunication, education, and industrial andeconomic growth. The art of paper making wasfirst discovered in China in and around 2ndcentury. B.C. pan where it travelled slowly westward and reached the prantiens of Europe. Bythe end of 14th century, a member of papermill existed in Europe, particularly in Spain,Italy, France and Germany. the invention ofprinting in 1956 brought a vastly in creaseddemand for paper, and paper-manufacturingwas introduced to England. America followedin 1690. Agricultural residues, such asbagasse, rice husk, wheat husk jute sticks,grasses, etc are fast becoming popularmaterials for paper making. considerableattention is being given to the utilization ofvarious agricultural by products for preparing

pulp for paper manufacture landable efforts arebeing make in this direction.

COST ESTIMATIONPlant Capacity 100 MT/DayLand & Building (8 Acres) Rs. 27.50 Cr.Plant & Machinery Rs. 38 Cr.W.C. for 3 Months Rs. 23.14 Cr.Total Capital Investment Rs. 91.25 Cr.Rate of Return 22%Break Even Point 58%*****************************************************

I.V. FLUID (DEXTROSE SALINE)[EIRI-1916]

Intra venous fluids, in general are used as I.Vdrips for patients in nursing homes andhospitals suffering from acute dehydration orconsiderable debilitating conditions. These I.Vfluids replanish the body fluids. Though anumber of I.V fluids are there, generally threetypes of I.V fluids are used in hospitals as I.Vdrips. They are as follows:- Dextrose injectionfluid, 2. Dextrose and sodium chloride injectionfluid. Crystalloid: Balanced salt/electrolytesolution; for msa true solution and is capableof passing through semi permeablemembranes. May be isotonic, hypertonic orhypotonic. Normal Saline (0.9% NaCl),Lactated Ringer’s, Hypertonic saline (3, 5, &7.5%), Ringer’s solution. However, hypertonicsolutions are considered plasma expanders asthey act to increase the circulatory volume viamovement of intracellular and interstitial waterinto the intravascular space.

COST ESTIMATIONPlant Capacity 5000 Bottles/DayLand & Building (1500 sq.mt.) Rs. 84 LacsPlant & Machinery Rs. 80 LacsW.C. for 2 Months Rs. 44 LacsTotal Capital Investment Rs. 2.17 Cr.Rate of Return 25%Break Even Point 61%*******************************************************

SPONGE IRON REDUCTIONPLANT (STEEL BILLETS FROM

IRON ORE) [EIRI-1917]Sponge iron or direct reduced iron is a highquality porous solid-state metallic product thatis produced from iron ore (in the form of lumps,pellets or fines) using a reducing gas such asnatural gas or coal. It has a slightly higher ironcontent that makes it better suited for use inan electric arc furnace route of steel making.The gases that are produced during theproduction of sponge iron can be used invarious applications that help offset the cost ofiron production. Sponge iron is the productcreated when iron ore is reduced to metalliciron, usually with some kind of carbon(charcoal, etc), at temperatures below themelting point of iron.

COST ESTIMATIONPlant Capacity 300 MT./DayLand & Building (80,000 sq.mt.) US$ 1.09 Cr.Plant & Machinery US$ 33.40 LacsW.C. for 2 Months US$ 77.91 LacsTotal Capital Investment US$ 2.24 Cr.Rate of Return 18%Break Even Point 55%*****************************************************

Top Industries to Start

Hi-Tech Projects,Dec’16, www.eiriindia.org # 04

BOPP FILM [EIRI-1918]BOPP film, a part of the flexible packagingindustry has emerged as one of the mostpopular, high growth films in the world. Lowercosts and convenience has added to the growthof BOPP in the past few years, along with otherflexible packaging materials. Moreover, thegrowth in demand for this film has beensubstantial both in developed as well asemerging markets on account of its recyclablenature and applications in a variety of non-foodand food products. The worldwide demand forBOPP film has been growing rapidly and since2002, the global BOPP film industry hasexpanded by 72% with China accounting forthe major production and consumption.Geographically, Asia was the largest marketfor BOPP, followed by Europe, and NorthAmerica region. India has the least per capitaconsumption (100g) of BOPP films among theemerging economies as compared to the of the2 kg. of developed countries.

COST ESTIMATIONPlant Capacity 24 Ton/DayLand & Building (8000 sq.mt.) Rs. 8.20 Cr.Plant & Machinery Rs. 80 Cr.W.C. for 1 Month Rs. 8.16 Cr.Total Capital Investment Rs. 96.76 Cr.Rate of Return 17%Break Even Point 67%*******************************************************

SILICON CARBIDEREFRACTORY BRICKS USINGFOR FURNACE LINING ANDKILN FURNITURE [EIRI-1919]

A silicon refractory brick is a block of refractoryceramic material used in lining of furnaces.Silicon Carbide Brick adopts the followingcrafts, such as high-compression shape, high- temperature nitride cremation and so on.Silicon Carbide Brick is obviously higher thannational standard on main technical index. It isfirstly-chosen product on interior material ofblast furnace and side material of electrolyticaluminum.

COST ESTIMATIONPlant Capacity 16.67 MT/DayLand & Building (8000 sq.mt.) US$ 9.05 LacsPlant & Machinery US$ 10.52 LacsW.C. for 2 Month US$ 16.21 LacsTotal Capital Investment US$ 37.18 LacsRate of Return 36%Break Even Point 46%******************************************************

HORTICULTURE-FLOWERSTHROUGH GREEN HOUSETECHNOLOGY [EIRI-1920]

Flowers are symbol of beauty, love, affection,romance tranquility etc. Besides their aestheticvalue, they are important for their economicuses, such as for cut-blooms and for extractingperfumes and other products. In our country,flowers are sanctified and are commonly usedin worshipping the deities in our homes andtemples. We are intimately associated withthem, and on all festive occasions likemarriages religious ceremonies and social

functions, the use of flowers and garlands hasbecome almost essential. A large genus oferect, same notes or climbing shrubs widelydistributed in the temperate parts of thenorthern hemisphere and on tropicalmountains. About ten species have beenintroduced for cultivation as ornamentals or forproduction of rose water and attar.

COST ESTIMATIONLand & Building (4000 sq.mt.) Rs. 2.15 Cr.Plant & Machinery Rs. 95 LacsW.C. for 2 Month Rs. 15 LacsTotal Capital Investment Rs. 3.32 Cr.Rate of Return 16%Break Even Point 66%*********************************************************

GALVANIZING PLANT FORSTRUCTURES (FOR TOWERS)

Galvanizing plant for structures (for towers)comprising galvanizing angles and channelstakes recourse to Hot Dip Galvanizing process,involving pickling, fluxing, specter &galvanizing. Structural towers are commonlyfabricated with four columns, although eithereight or twelve columns are sometimes used,for large elevated tanks. The columns of towersare commonly made of two channels, bracedtop and bottom, with top cover plate andbottom lacing of a built H-section made ofplates and angels or a rolled H-section. Strutsare made of built channels, or of angles, or ofplates and angles. The diagonal bracing iscommonly made of rods with adjustabledevices or turn buckles.

Cost EstimationPlant Capacity 4 MT./DayLand & Building (2000 sq.mt.) Rs. 92 LacsPlant & Machinery Rs. 48 LacsTotal Capital Investment Rs. 2.56 Cr.Rate of Return 28%**********************************************************

SANITARY NAPKINSAND BABY DIAPERS

(AUTOMATIC IMPORTED PLANT)Baby diaper may be a newly developed productfor India, where as for European countries ithas become a general necessity for newly bornchild caretaking. It was developed & marketedby a swedish firm some time in the year 1958.As a matter of fact a diaper is used forwrapping the newly born or pretty youngchildren who have not get developed the fixedroutine for making water or latrine. He or shemay discharge at any time which creates a lotof trouble to his mother or caretaker. Who hasno convenient place or time to attend the babywhile for an outing, shopping, going to moviesor friends & relatives. To avoid all trouble theyjust wrap their babies with the diaper & babymay discharge whenever he feels to. It canretain the wetting for about two hours or so.

Cost EstimationPlant Capacity 102500 Pcs./DayLand & Building (2000 sq.mt.) Rs. 1.31 Cr.Plant & Machinery Rs. 56 LacsTotal Capital Investment Rs. 3.05 Cr.Rate of Return 75%Break Even Point 40%*********************************************************

1. AUTOMOBILE PAINTS2. ALUMINIUM PAINT3. ACRYLIC COPOLYMER EMULSION4. ACRYLIC EMULSION PAINTS5. BITUMINOUS BASED CORROSION

RESISTANT6. CEMENT PAINT7. CLEAR TRANSPARENT LACQUER FOR

COATING ON BRASS BANGLES TO MAKEIT WEATHER-RESISTANT

8. COPPER PHTHALOCYANINE BLUE & GREEN9. DRY DISTEMPER AND CEMENT PAINT10. EMULSION PAINTS11. ELECTROPHORIC LACQUER,

POLYURETHANE (PU) LACQUER(WATER BASED) IN LIQUID FORM FORELECTROPHORETIC COATINGAPPLICATION ON METAL PLATES

12. ENAMEL REMOVERS13. ENAMELLING OF COPPER WIRE14. EPOXY RESINS15. GLASS PUTTY16. GLASS COATING SOLUTION17. HAMMERTONE PAINTS18. INSULATING VARNISH19. INSULATING VARNISH (POLY VINYL

BUTYRAL BASED, FFC GRADE)20. LIME COLOUR/CEMENT COLOUR

(SYNTHETIC- RED IRON OXIDE)21. LACQUER EMULSION FOR LEATHER

FINISHING & N.C.LACQUER FORLEATHER FINISHING (FORMULATION &MANUFACTURING PROCESSES)

22. NAPHTHA BASED THINNER23. N.C.PUTTY24. N.C. THINNERS USED IN AUTOMOBILES25. OIL-BOUND DISTEMPER PAINTS26. PAINT INDUSTRY27. PAINT REMOVERS28. PAINT DRIERS29. POWDER COATING PAINTS30. PAINT AND REDUCER31. PRIMER PAINTS, ENAMEL PAINTS

& DISTEMPER32. POWDER COATING33. PRIMER PAINTS & ENAMEL PAINTS34. POLY VINYL ACETATE EMULSION35. PIGMENTS BINDERS FOR

TEXTILE PRINTING36. PUTTY AND WATER PROOFING PAINT37. PHENOL FORMALDEHYDE RESIN38. POLY AMIDE RESIN39. REFRACTORY PAINT (GRAPHITE BASED)40. RED OXIDE PIGMENTS41. STOVING PAINT42. SILICONE EMULSION FOR TEXTILE43. STAINER FOR PAINTS44. SOLVENTS & THINNERS45. TEXTURE PAINTS46. THINNERS47. THINNERS (ETHYL ALCOHOL BASED)48. THINNERS (WHITE SPIRIT BASED)49. UREA FORMALDEHYDE RESIN50. UNSATURATED POLYESTER RESINS51. VARNISH (CLEAR) FOR WOOD

(FLAME-RETARDING TYPE)52. WOOD PRIMER FOR PAINTS53. WALL PUTTY54. WIRE ENAMEL

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant & Equipments and RawMaterials, Cost Economics with Profitability Analysis,BEP, Resources of Finance etc.

Ask for Price of this CD containing all above 54 ProjectReports. Payable fully in advance through Bank Draft/M.O. in favour of ENGINEERS INDIA RESEARCHINSTITUTE, DELHI. Delivery within 3 days. (To Orderplease dial : 098114-37895).

54 PAINT, VARNISH, SOLVENTS, LACQUERS, RESINS, ENAMEL, PIGMENTS THINNER AND

POWDER COATING PROJECT REPORTS (54 PROJECT REPORTS IN CD)

Hi-Tech Projects,Dec’16, www.eiriindia.org # 05

Start Your Own Industry1. BLISTER FILM P.V.C2. FOAMED PVC COMPOUNDING &

ITS PRODUCTS (PROFILES,BOARDS, PIPES, ETC.)

3. P.V.C. NON-WOVEN MAT4. P.V.C. INSULATION TAPE5. P.V.C. PIPES & FITTINGS6. P.V.C. COMPOUNDING (FRESH)7. P.V.C. BATTERY SEPARATOR8. P.V.C. FLEXIBLE PIPES9. P.V.C. FOOT WEAR10. P.V.C. LEATHER CLOTH11. P.V.C. WIRES AND CABLES12. P.V.C. FILMS13. P.V.C. GRANULES FROM PLASTIC

WASTE14. P.V.C. CONDUIT PIPES15. P.V.C. COVER & FILES

(CONFERENCE BAGS, FOLDERS,FILE COVERS, DIARY COVERSETC.)

16. P.V.C./PLASTICS (SOFT/RIGID)FILMS/SHEET

17. P.V.C. INSULATION TAPE18. P.V.C. STABILIZERS19. P.V.C. EXTRUSION PROFILES

(WIRING CHANNELS)20. P.V.C. RESIN FROM CALCIUM

CARBIDE21. P.V.C. INDUSTRIAL PRODUCTS

(INJECTION MOULDED)22. P.V.C. FLUSH CISTERN23. RIGID PVC COMPOUNDED

GRANULES FOR INJECTIONMOULDING MACHINE (USED FORPIPE FITTINGS, ELBOWS ETC.)

24. uPVC DOORS & WINDOWS25. uPVC DOORS & WINDOW PROFILES

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant & Equipments and RawMaterials, Cost Economics with Profitability Analysis,BEP, Resources of Finance etc.

Ask for Price of this CD containing all above 25 ProjectReports. Payable fully in advance through Bank Draft/M.O. in favour of ENGINEERS INDIA RESEARCHINSTITUTE, DELHI. Delivery within 3 days. (To Orderplease dial : 098114-37895).

SUPERABSORBENT POLYMER(POLY ACRYLIC ACID BASED)

[EIRI-1745]Superabsorbent polymers are primarily usedas an absorbent for water and aqueoussolutions for diapers, adult incontinenceproducts, feminine hygiene products, andsimilar applications. Undoubtedly, in theseapplications, superabsorbent materials willreplace traditional absorbent materials suchas cloth, cotton, paper wadding, and cellulosefiber. Commercial production ofsuperabsorbent polymers began in Japan in1978, for use in feminine napkins. This earlysuperabsorbent was a crosslinked starch-g-polyacrylate. Polyacrylic acids eventuallyreplaced earlier superabsorbents, and is thepr imary polymer employed forsuperabsorbent polymers today.1 In 1980,European countries further developed thesuperabsorbent polymer for use in babydiapers. This first diapers employing thistechnology used only a small amount ofpolymer, approximately 1-2 g.

Cost EstimationPlant Capacity 320.00 MT./DayLand & Building (8 Acres) Rs. 19.80 CrPlant & Machinery Rs. 16.00 CrW.C. for 3 Months Rs. 4.84 ArabTotal Capital Investment Rs. 5.22 ArabRate of Return 37%Break Even Point 28%****************************************************

STAINLESS STEEL UTENSILS[EIRI-1746]

Stainless steel cookware and bake ware isexceptionally durable. Once stainless steelhas been stamped, spun or formed intoutensil shape, it takes an extremely hard blowto dent it. Its attractive finish won’t corrode ortarnish permanently, and its hard, tough,nonporous surface is resistant to wear.Extremely smooth and scratch resistant,stainless steel utensils take an excellentpolish. Top-of-the-range cookware, bakeware,pantryware, tools and other equipment arefrequently produced in stainless steel, whicheases the work of homemakers. Like othersteels, stainless steel is an al loy—acombination of iron and other metals. Whatmakes it different from other steels, however,is that it contains at least 11 percentchromium. It is chromium that makes steel“stainless” all the way through. Stainless steelmay also contain other elements, such asnickel, molybdenum, columbium or titanium.These materials can contribute specialhardness, high temperature resistance, andresistance to scratching and corrosion to thefinished stainless steel alloy.

Cost EstimationPlant Capacity 720 Kgs./DayLand & Building (2000 sq.mt.) Rs. 1.31 Cr.Plant & Machinery Rs. 19 LacsW.C. for 2 Months Rs. 52 LacsTotal Capital Investment Rs. 2.11 Cr.Rate of Return 20%Break Even Point 65%***************************************************

DOUGH MOULDINGCOMPOUND (DMC), BULK

MOUDING COMPOUND (BMC),SHEET MOULDING

COMPOUND (SMC) [EIRI-1747]Bulk moulding compounds represent a familyof chopped fibre thermoset or thermoplasticbased composite materials. Fibre lengths aretypically 1/2 inch, 1 inch or 2 inch (6 to 50mm). Longer fibres provide higher tensilestrengths while shorter fibres allow morecomplex shapes to be moulded. Standardmodulus and intermediate modulus fibres areutilized as is S2 glass. TenCate offers acomplete line of epoxy based thermosets andalso offers a line of thermoplastic resins suchas PEEK, PEKK, PPS and PEI. Thermoplasticbased resins offer low moisture uptake, goodimpact resistance and low flame, smoke andtoxicity.

Cost EstimationPlant Capacity 1 TPD/DayLand & Building (1000 sq.mt.) Rs. 1.13 Cr.Plant & Machinery Rs. 51 LacsW.C. for 3 Months Rs. 1.10 Cr.Total Capital Investment Rs. 2.92 Cr.Rate of Return 73%Break Even Point 33%***************************************************

LIQUID SULFUR TRIOXIDE(SO3) (EIRI-1748)

Sulfur trioxide (alternative spelling, sulphurtrioxide) is the chemical compound with theformula SO3. In the gaseous form, thisspecies is a significant pollutant, being theprimary agent in acid rain. It is prepared onmassive scales as a precursor to sulfuric acid.Gaseous SO3 is a trigonal planar moleculeof D3h symmetry, as predicted by VSEPRtheory. SO3 belongs to the D3h point group.In terms of electron-counting formalism, thesulfur atom has an oxidation state of +6 anda formal charge of +2. The Lewis structureconsists of an S=O double bond and two S–O dative bonds without utilizing d-orbitals.

Cost EstimationPlant Capacity 320.00 MT./DayLand & Building (10000 Sq.Mtr) Rs. 6.50 CrPlant & Machinery Rs. 3.75 CrW.C. for 3 Months Rs. 3.06 CrTotal Capital Investment Rs. 14.05 CrRate of Return 39%Break Even Point 43%***************************************************

PAN MASALA AND MOUTHFRESHNERS [EIRI-1749]

Pan masala contains catechu, chuna,flavouring agents and perfumery compoundsetc. It refreshens the mouth and gives thefeeling of cold in throat when taken in smallamount. Panmasala is chewed either with panor directly without any other thing. Pan masalais a mixture of nuts, seeds, herbs, and spiceswhich is served after meals in India. Variousversions are also served in the Middle Eastand parts of Southeast Asia, where they aretreated as mouth fresheners. Some

households and restaurants make their ownmixtures with special house ingredients, andit is also possible to purchase packaged panmasala from spice stores and many marketsin India. Outside of India, it is available atIndian specialty stores and through importers.EIRI have just prepared the Detailed ProjectReport on the subject. visit www.eiriindia.org

Cost EstimationPlant Capacity 300.00 Kgs./DayLand & Building (500 Sq.Mtr) RentedPlant & Machinery Rs. 20.00 LacsW.C. for 1 Month Rs. 32.00 LacsTotal Capital Investment Rs. 58.00 LacsRate of Return 59%Break Even Point 56%***************************************************

Hi-Tech Projects,Dec’16, www.eiriindia.org # 06

Start Your Own Industry

Patrons, deposit amount in EIRI AccountICICI BANK LTD. CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

TOYOTA AUTOVEHICLESDEALERSHIP WITH

AUTOMOBILE GARAGE[EIRI-1750]

A car dealership or vehicle local distributionis a business that sells new or used cars atthe retail level, based on a dealership contractwith an automaker or its sales subsidiary. Itemploys automobile salespeople to sell theirautomotive vehicles. It may also providemaintenance services for cars, and employautomotive technicians to stock and sell spareautomobile parts and process warranty claimsCar dealerships were traditionally large lotslocated out of town or on the edge of towncenters and which relied on the skills of salesstaff to sell vehicles.

Cost EstimationPlant Capacity 1 CAR/DayLand & Building (4000 Sq.Mtr) Rs. 2.22 CrPlant & Machinery Rs. 57.15 LacsW.C. for 1 Month Rs. 3.39 CrTotal Capital Investment Rs. 6.61 CrRate of Return 28%Break Even Point 62%***************************************************

ONION CHIPS & POWDER ANDGARLIC POWDER

(DEHYDRATION INDUSTRY)[EIRI-1751]

Onion (Allium cepa) belongs to the familyAlliaceous. Onion is a vegetable crop onsumedall over the world but cannot be grown inabundance in every country. It is mainly grownfor its bulb which is used for consumption,flavouring and seasoning in almost everyhome. As an item of world trade, onion rankssecond in importance after tomatoes amongthe vegetables. In India, onion is extensivelycultivated over a large area spread almostthroughout the country. It is produced for bthdomestic consumption as well as exports. Theonions are regarded as a highly expor toriented crop and earn valuable foreignexchange for the country. Though Indiaproduces a significant quantity of onions it isnot regular and sufficient enough to meet thedemands for both domestic requirement andexports.

Cost EstimationPlant Capacity 1.60 TON/DayLand & Building (800 Sq.Mtr) Rs. 1.05 CrPlant & Machinery Rs. 48.50 LacsW.C. for 1 Month Rs. 35.73 LacsTotal Capital Investment Rs. 1.98 CrRate of Return 38%Break Even Point 48%***************************************************

GLASS BOTTLEMANUFACTURING [EIRI-1752]

Glass is one of man’s most valuable andversatile materials. About 700 different glasscompositions are in commercial use. Theseare fabricated into tens of thousand of differentarticles that have combinations of propertiesfor about a thousand essentially different uses.Glass ware manufacturing occupies an

important role in the glass manufacturingindustry. The process of glass waremanufacturing can be divided into thecontinuous production process and thediscontinuous process. For former is aprocess in which processes from the input ofraw materials through the moulding of glassare conducted continuously and in equiposeutilizing the tank furnace. As a whole the plantof this process should be operated for eighthours several kinds of moulding may be doneby this process if the continuous formingmachine is employed.

Cost EstimationPlant Capacity 25 MT./DayLand & Building (6000 Sq.Mtr) Rs. 8.00 CrPlant & Machinery Rs. 3.16 CrW.C. for 3 Months Rs. 2.30 CrTotal Capital Investment Rs. 13.92 CrRate of Return 31%Break Even Point 48%***************************************************

GOAT FARMING [EIRI-1753]Goats are among the main meat-producinganimals in India, whose meat (chevon) is oneof the choicest meats and has huge domesticdemand. Due to its good economic prospects,goat rearing under intensive and semi-intensive system for commercial productionhas been gaining momentum for the pastcouple of years. High demand for goat andits products with potential of good economicreturns have been der iving manyprogressive farmers, businessmen,professionals, ex-servicemen and educatedyouths to take up the goat enterprise on acommercial scale. The emerging favourablemarket conditions and easy accessibility toimproved goat technologies are also catchingthe attention of entrepreneurs. A number ofcommercial goat farms have beenestablished in different regions of the country.

Cost EstimationLand & Building (7200 Sq.Ft.) Rs. 85.30 LacsPlant & Machinery Rs. 2.25 LacsW.C. for 1 Month Rs. 1.69 LacsTotal Capital Investment Rs. 92.64 LacsRate of Return 19%Break Even Point 53%**************************************************

SANITARY NAPKINS(DISPOSABLE) [EIRI-1754]

Sanitary napkin is a hygiene absorbentproduct used by women during menstrualperiods. It is a product of technical textile. Asanitary napkin, sanitary towel, sanitary pad,menstrual pad, maxi pad, or pad is anabsorbent item worn by a woman while sheis menstruating, recovering from vaginalsurgery, for lochia (post bir th bleeding),abortion, or any other situation where it isnecessary to absorb a flow of blood from awoman’s vagina. The menstrual cycle starsfor young women between the ages 11-17,frequently around 12-13 years. On averagea woman experiences a period every 28thDay, 12-13 times in a year. A menstrual periodnormally lasts 3-7 Days. The loss of fluid in aperiod is on average half a cup or 65-80 ml.

The menstrual pattern is influenced by givingbir th and contraceptive methods.Menstruation lasts until menopause at theage 45-55. The feminine hygiene productsmarket has evolved over more than 100 years.

Cost EstimationPlant Capacity 1,60,000 NOS/DayLand & Building (1500 Sq.Mtr) Rs. 2.15 CrPlant & Machinery Rs. 3.60 CrW.C. for 3 Months Rs. 1.32 CrTotal Capital Investment Rs. 7.24 CrRate of Return 34%Break Even Point 51%***************************************************

WALNUT PROCESSING PLANT[EIRI-1755]

A walnut is the nut of any tree of the genusJuglans (Family Juglandaceae), particularlythe Persian or English walnut, Juglans regia.It is used for food after being processed whilegreen for pickled walnuts or after full ripeningfor its nutmeat. Nutmeat of the eastern blackwalnut from the Juglans nigra is lesscommercially available, as are butternutnutmeats from Juglans cinerea. The walnutis nutrient dense with protein and essentialfatty acids. Etymologically, the word walnutderives from the Germanic wal- and OldEnglish wealhhnutu, literally “foreign nut”,wealh meaning “foreign” (wealh is akin to theterms Welsh and Vlach Characteristics.Walnuts are rounded, single-seeded stonefruits of the walnut tree commonly used forthe meat after fully ripening. Following fullripening, the removal of the husk reveals thewrinkly walnut shel l, which is usuallycommercially found in two segments (three-segment shells can also form). During theripening process, the husk will become brittleand the shell hard.

Cost EstimationPlant Capacity 15 TONS/DayLand & Building (2 Acres) Rs. 1.94 CrPlant & Machinery Rs. 2.62 CrW.C. for 1 Month Rs. 21.38 CrTotal Capital Investment Rs. 26.32 CrRate of Return 45%Break Even Point 32%****************************************************

SUPERABSORBENT POLYMERUSING CONTINUOUS GEL

POLYMERIZATION [EIRI-1756]Superabsorbent polymers are primarily usedas an absorbent for water and aqueoussolutions for diapers, adult incontinenceproducts, feminine hygiene products, andsimilar applications.

Cost EstimationPlant Capacity 320 MT./DayLand & Building (8 Acres) Rs. 19.80 CrPlant & Machinery Rs. 18.50 CrW.C. for 3 Months Rs. 5.58 ArabTotal Capital Investment Rs. 5.97 ArabRate of Return 13%Break Even Point 52%****************************************************

Top Industries to Start

Hi-Tech Projects,Dec’16, www.eiriindia.org # 07

Patrons, deposit amount in EIRI AccountSTATE BANK OF INDIA CA-30408535340

(RTGS/NEFT/IFSC Code: SBIN0001273)

COLD STORAGE PLANT[EIRI-1757]

All fruits and vegetables require specializedpost harvest treatment, appropriatetemperature and relative humidity for theirstorage. Establishment of cold storageprovides refr igerated storage andpreservation facilities for several fruits,vegetables & flowers. Because of technologyadvancements and logistic strategies, the coldstorage of perishable items has become animportant stage in the distribution betweenmanufacturers/processors and retai llocations. The cold storage will ensure theincreased availability and improved quality ofhigh value perishable fruits and vegetablesfor both export and local sale, which wouldotherwise perish or deteriorate. This projectis designed for storing of potatoes and apples/kinnu etc. but it can be used to store multipleproducts, stored in different compartments ofthe unit, where relative temperatures forrespective products can be maintained. Themajor clientele of this business will be theexport houses and the local trading andmarketing units of potato and apple/ kinnu.The project will further aim at storing fruits &vegetables even during off-seasons. Theproject will ultimately assist the clientele inmaintaining market pr ice equil ibr iumthroughout the year for potatoes.

Cost EstimationPlant Capacity 5000 MT.Land & Building (2 Acres) Rs. 4.31 CrPlant & Machinery Rs. 3.26 CrW.C. for 1 Month Rs. 12.16 LacsTotal Capital Investment Rs. 7.86 CrRate of Return 18%Break Even Point 61%***************************************************

KRAFT PAPER FROM WASTECARTON BOXES [EIRI-1758]

Paper form a commodity of prime importanceto Day from the par ts of view of masscommunication, education, and industrial andeconomic growth. The art of paper makingwas first discovered in China in and around2nd century. B.C. pan where it travelled slowlywest ward and reached the prantiens ofEurope. By the end of 14th century, a memberof paper mill existed in Europe, particularly inSpain, Italy, France and Germany. theinvention of printing in 1956 brought a vastlyin creased demand for paper, and paper-manufacturing was introduced to England.America fol lowed in 1690. Agriculturalresidues, such as bagasse, rice husk, wheathusk jute sticks, grasses, etc are fastbecoming popular materials for papermaking. considerable attention is being givento the utilization of various agricultural byproducts for preparing pulp for papermanufacture landable efforts are being makein this direction. Paper production requires adisintegration of the bulky fibrous material toindividual or small agglomerate fibres. This iscalled pulping. The ideal fibre for high grade

paper should be long, high in cellulosecontent and low in ligrin content.

Cost EstimationPlant Capacity 100 MT./DayLand & Building (16 Acres) Rs. 31.95Cr.Plant & Machinery Rs. 51.00 Cr.W.C. for 3 Months Rs. 25.40 Cr.Total Capital Investment Rs. 111.49 Cr.Rate of Return 32%Break Even Point 52%***************************************************

GUAR GUM [EIRI-1759]The districts in Haryana indulge d in theproduction of guar are Bhiwani, Sirsa,Mahendragarh and Rewari and the districtsin Gujarat are Kutch, Banaskantha, Mehsana,Sabarkantha and Ahmadabad. Jodhpur cityin Ra jasthan is one of the major processingcenters of guar gum in India. Guar alsoknown as cluster bean (Cyamopsistetragonoloba (L.) Taub) is a drought hardyleguminous crop. Guar is being grown forseed, green fodder, vegetable and greenmanuring. It is an annual plant, about 4 feethigh, vertically, stalked, with large leaves andclusters of pods.

Cost EstimationPlant Capacity 5 MT./DayLand & Building (1 Acre) Rs. 2.00 CrPlant & Machinery Rs. 1.11 CrW.C. for 3 Months Rs. 2.52 CrTotal Capital Investment Rs. 5.74 CrRate of Return 90%Break Even Point 25%****************************************************

CATIONIC SOFTENERS[EIRI-1760]

Softening of textile materials was probablycarried out in prehistoric times and hascontinued till toDay. Most of the Softeningagents are derived from straight chain fattyradicals containing 12 to 18 carbon atoms.Softening agents may be divided into threemain classes i.e.- 1. Anionic Softeners suchas oil Emulsions, sulphonated oils, soaps,sulphated fatty alcohols & tallow. 2. Cationicsofteners - such as substituted quaternaryammonium compounds and 3. NoronicSofteners such as Polyoxyethyleneder ivatives, Polyethylene emulsions &silicons.

Cost EstimationPlant Capacity 600 Kgs./DayLand & Building (200 Sq.Mtr) OwnPlant & Machinery Rs. 4.50 LacsW.C. for 1 Month Rs. 17.87 LacsTotal Capital Investment Rs. 24.67 LacsRate of Return 39%Break Even Point 67%****************************************************

BUS MANUFACTURINGPLANT(LIKE VOLVO TYPE)

[EIRI-1761]Bus is used as the most common publictransport vehicle in our country. DifferentState Transport Undertakings are plying theirbuses for commuting public from one place

to another and from one State to another.Apart from these Undertakings, Private BusOperators, travel agencies etc. are alsooperating buses on permit basis. With rapidchanges in the society, now a Days it hasbecome necessary to provide good andefficient service to the public. Also with therapid industrialisation, public is moving veryfrequently from one place to another usingpublic transport.

Cost EstimationPlant Capacity 1 Bus/DayLand & Building (10,000 Sq.Mtr) Rs. 4.68 CrPlant & Machinery Rs.1.51 CrW.C. for 2 Months Rs. 40.14 CrTotal Capital Investment Rs. 46.91 CrRate of Return 36%Break Even Point 36%****************************************************

BANANA CHIPS (USINGMICROWAVE DRYING

TECHNOLOGY) [EIRI-1762]Banana is the one of richest iron source greenvegetable. It can be preserved for 3 monthsor more by reducing moisture in it. this maybe done by drying procedure or fryingprocedure. This is preserving art of greenvegetable for long time. The keeping qualityof food materials is greatly improved by thereduction in their water contents. Fruits, leafyvegetables, meat, fish, and dairy productcontaining high percentage of waterdeteriorate more rapidly than root crops andcereals which are comparatively dry. Dryingby exposure to the sun is the method adoptedin several countries for prolonging the storagelife of fruits and fish. In India, more food ispreserved by sun-drying than by any othermeans.

Cost EstimationPlant Capacity 2.40 MT/DayLand & Building (1500 Sq.Mtr) Rs. 2.08 CrPlant & Machinery Rs. 1.50 CrW.C. for 3 Months Rs. 1.98 CrTotal Capital Investment Rs. 5.88 CrRate of Return 40%Break Even Point 41%****************************************************

TRIETHYLENE GLYCOL FROMMEG/DEG, ETHYLENE OXIDE &

WATER [EIRI-1763]Triethylene glycol, TEG, or triglycol is acolor less odorless viscous liquid withmolecular formulaHOCH2CH2OCH2CH2OCH2CH2OH. It isused as a plasticizer for vinyl. It is also usedin air sanitizer products, such as “Oust” or“Clean and Pure”.

Cost EstimationPlant Capacity 10 MT./DayLand & Building (1.5 Acres) Rs. 3.31 CrPlant & Machinery Rs. 3.10 CrTotal Capital Investment Rs. 15.32 CrRate of Return 33%Break Even Point 42%***************************************************

Hi-Tech Projects,Dec’16, www.eiriindia.org # 08

Best Industries to Start and Grow Hi-Tech Projects(Date of Posting 24th to 30th of Every Month,

Weight of Magazine- Upto 48 Gram)

An Industrial Monthly Magazine onHi-Tech Projects & developed

and underdevelopingTechnologies with lucrative

Project opportunitiesEditor

Sudhir GuptaAsst. EditorAnkur Gupta

SUBSCRIPTION RATESFOR INDIA

Single Copy Rs. 20/-One Year Rs. 225/-

Three Years Rs. 650/-(Add Rs. 100/- for outstation cheques.

Please make the Draft/Cheque infavour of “Engineers India Research

Institute, Delhi”

FOR OVERSEASSingle Copy US$ 10/-One Year US$ 120/-

CAUTIONProject Reports/Profiles provided in

this issue had been prepared ondatas available at the time of

preparing these reports.Entrepreneurs/Industrialists are

requested to please update the databefore venturing into any project

mentioned herein.

PUBLISHERS

4449 Nai Sarak, Main Road, Delhi - 110006(INDIA) Ph : 9111- 23916431, 23918117,

45120361, 9811437895, 9811151047E-Mail : eiritechnology@gmail.com,

eiriprojects@gmail.comWebsite: www.eiriindia.org

www.eiribooksandprojectreports.com

Patrons may also directly transfer thefund for Project Reports & Books in

following EIRI current accounts:HDFC BANK - 05532020001279(RTGS/NEFT/IFSC CODE: HDFC0001981)

ICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE: ICIC0000387)

AXIS Bank Ltd. - 054010200006248(RTGS/NEFT/IFSC CODE:UTIB0000054)

UNION BAK OF INDIA -307201010015149(RTGS/NEFT/IFSC CODE: UBIN0530727)

STATE BANK OF INDIA -30408535340(RTGS/NEFT/IFSC CODE: SBIN0001273)

AND SMS US ON PH. +91 9811437895

BENEFICATION OF GRAPHITEORE [EIRI-1764]

Graphite is one of three pure forms of carbon(C, atomic number 6), the others beingdiamond and fullerenes. It is grey to black incolour, opaque, and often has a metalliclustre. It is a soft, light mineral, is flexible butnot elastic and has a high melting point of3,390°C. Graphite’s layer atomic structure isresponsible for many of its unique properties.It exhibits both metallic and non-metallicproperties, including high thermal resistance,lubricity, inertness as well as thermal andelectrical conductivity. The focus of this workis natural graphite. Owing to its diverseproperties, graphite is used in a wide varietyof applications. Most of graphite usage toDayis in refractory applications. Other keyindustrial applications for graphite includelubricants, steelmaking, metal casting, brakelinings.

Cost EstimationPlant Capacity 40 MT/DayLand & Building (60,000 Sq.Mtr) Rs. 6.50 CrPlant & Machinery Rs. 1.26 CrW.C. for 3 Months Rs.1.82 CrTotal Capital Investment Rs. 9.77 CrRate of Return 12%Break Even Point 65%***************************************************

G.I.WIRE AND M.S. BINDINGWIRE [EIRI-1765]

Mild Steel Galvanized steel wire popularlyknown as galvanized wire have extensiveapplication in various field. It has got excellentdemand in pre-stressed concrete product likerailway sleeper, telegraph and telephone,electr ic pole etc. and also find ampleapplication in pre-casted cement product likepipes, frames of door and windows etc. Onthe other hand it has its own market in thefield of strands and also its domestic demandcannot be ignored. The M.S. Wire are drawnto required dia and then galvanized i.e.coating of zinc is employed on it, givesexcellent anti corrosion property to steel wire.

Cost EstimationPlant Capacity 80.00 MT/DayLand & Building (5,000 Sq.Mtr) Rs. 4.45 CrPlant & Machinery Rs. 3.36 CrW.C. for 2 Months Rs. 22.34 CrTotal Capital Investment Rs. 30.59 CrRate of Return 86%Break Even Point 23%***************************************************

INDUSTRIAL PAINT AND INKS(VARIOUS TYPES) [EIRI-1766]

Organic coatings are composed of pigmentssuspended in a vehicle. The vehicle or carrierconsists primarily of a resinuous of driers,plasticizers and stabilizers as required. As thepaint film dries, these vehicles changes froma liquid to the solid film by one or more ofseveral mechanisms. 1. Evaporation ofSolvents. 2. Oxidation (of a drying oil). 3.Polymerization through application of heat,addition of catalyst, or combination of reactivecomponents. The pigments contribute such

properties as inhibitions of a metal surface(red lead & zinc chromate), reinforcement ofthe film, stabilization against deterioration bysunlight, controlled chalking (titanium oxide)and colour clear coating (varnishes, lacquers& shellac) are not pigmented. Inorganiccoatings such as the zinc silicates also maybe though of as a pigment suspended in avehicle. In this case, the pigment con consistsof metallic zinc dust, and the vehicle is ablend of water soluble silicates.

Cost EstimationPlant Capacity 3.00 MT/DayLand & Building (1 Acre) Rs. 2.93 CrPlant & Machinery Rs. 1.21 CrW.C. for 3 Months Rs. 2.83 CrTotal Capital Investment Rs. 7.15 CrRate of Return 30%Break Even Point 49%****************************************************

SILICONE EMULSION(RELEASE AGENT) FOR TYPES

OF INDUSTRIES – RUBBER,PLASTIC, PU FOAMS

[EIRI-1767]Silicones are synthetic polymers having aninorganic skeleton of alternate silicone andoxygen atoms, the silicone valencies nottaken up by oxygen being saturated withorganic grpoupe and other groups. Theyoccupy an intermediate position betweeninorganic and organic compounds. Becauseof this dual nature they have many propertieswhich have made them very useful in manyapplications. Silicones are produced in severalforms including fluids, rubbers and resins.

Cost EstimationPlant Capacity 250.00 Kgs/DayLand & Building RentedPlant & Machinery Rs. 2.30 LacsW.C. for 1 Month Rs. 9.82 LacsTotal Capital Investment Rs. 13.47 LacsRate of Return 75%Break Even Point 65%***************************************************

PE GRASS MAT [EIRI-1768]Synthetic Grass Floor Mat is an innovationproduct of modern times to impart an elegantand fascinating look to the floor for which it isused in ordinately as a covering material.Earlier other types of mats were used for floorcover ing but this novel product hassuperceded all those and has gained asignificant niche in floor furnishing. With thedevelopment of technology and new tastedfor aesthetic appeal for floor furnishing,synthetic Grass Floor Mat is predominantlygaining ground. The new fashion andrequirements will create new avenues forvarious types by changing colour and design.

Cost EstimationPlant Capacity 3600 sq.mt./DayLand & Building (1500 sq.mt.) Rs. 2 Cr.Plant & Machinery Rs. 1.20 Cr.W.C. for 1 Month Rs. 1.28 Cr.Total Capital Investment Rs. 4.63 Cr.Rate of Return 31%Break Even Point 51%****************************************************

Hi-Tech Projects,Dec’16, www.eiriindia.org #09

Start Your Own IndustryLAMINATED SHEETS/

ELECTRICAL INSULATIONBOARD [EIRI-1769]

Decorative plastic laminate is a durable flatsheeting material used in home and industrialfurnishings. It is most familiar under theFormica brand name. The FormicaCorporation is the world’s largestmanufacturer of plastic laminate. Other wellknown manufacturers include the PremarkCorporation and DuPont. Decorative laminateis commonly used to surface ki tchencounters, table tops, and cabinetry becauseof its resistance to stains, scratches, andheat. The laminate sheets are made up ofthree layers: the bottom layer of brown papercoated with phenolic resin, a second layer ofpaper decorated with the desired pattern, anda third layer of clear sheet. Both the secondand third layers are coated with melamineresin. Plastic laminate was first used as aninsulating material for industrial products. Thematerial was resistant to heat, water,chemicals, and electric current, thus havingthe properties to replace hard rubber andshellac for electrical insulation. Baekeland’smany experiments included impregnatingpaper with Bakeli te resin and thencompressing it under molds at high pressureand temperature in a process known asthermosetting.

Cost EstimationPlant Capacity 8000 Nos./DayLand & Building (4400 sq.mt.) Rs. 3.34 Cr.Plant & Machinery Rs. 1.12 Cr.W.C. for 2 Months Rs. 14.05 Cr.Total Capital Investment Rs. 18.82 Cr.Rate of Return 35%Break Even Point 37%****************************************************

uPVC WINDOWS FROM uPVCPROFILES [EIRI-1770]

uPVC Windows are widely used across thelobe, from the deserts of Arizona to thecoldest parts of Scandinavia/Russia, from thehot environs of Gulf to the tropics ofMalaysia, Thailand as wel l as veryextensively in China, S. Korea, Taiwan andmany more Geographies. In fact Europe andNorth America predominantly use only UPVCWindows in their residential constructions, forboth new and replacement. This is due totheir good aesthetics, durability, noise proofness, low maintenance requirement, bestair & water tightness, and their ability toprovide excellent thermal insulation, therebyhelping save air conditioning power costs inhomes, offices and commercial centers.UPVC Windows come with a very high qualitysurface finish, soft-contoured profiles and avariety of styles to meet the needs of the mostdemanding architects, designers and users.The environmental benefit of using UPVCWindows instead of wood and metal windowsis phenomenal. Due to their abi lity toconserve energy throughout their lifetime(from raw material stage to in use stage),UPVC Windows are recognized as Green

Windows thereby scoring over traditionalwood and metal windows.

Cost EstimationPlant Capacity 50.00 uPVC Window/DayLand & Building (3000 Sq.Mt.) Rs. 16.17 LacsPlant & Machinery Rs. 38.55 LacsW.C. for 3 Months Rs. 20.98 LacsTotal Capital Investment Rs. 80.81 LacsRate of Return 27%Break Even Point 64%****************************************************

NUTRICANDY [EIRI-1771]Nutri-candy is a sweet lozenge which hasbeen given to children attendingsupplementary feeding centres. The resultshave been astonishing with very highcompliance rates and a 15–50 per centreduction in anaemia. The lozenges containsugar, however, which could potentiallycontribute to dental caries. In ancient times,Sugar must have been a highly valuedconsumption item. Therefore, there was noandy that used sugar as liberally as we do inthe present age. Even if there was sugar, itwas consumed by a very limited class ofpeople who led a privileged life. But acomplete change occurred in the pictureanyone can now enjoy the sweet taste ofcandy. ToDay, there is a great variety ofcandies, which meet the desires of children.

Cost EstimationPlant Capacity 15 Lac Nos./DayLand & Building (4000 Sq.Mtr) Rs.3.85 CrPlant & Machinery Rs. 1.50 CrW.C. for 3 Months Rs. 3.37 CrTotal Capital Investment Rs. 8.42 CrRate of Return 33%Break Even Point 46%***************************************************

READY TO EAT PREMIX FOOD[EIRI-1772]

With a small beginning in 33 blocks in 1975,the Integrated Child Development Services(ICDS) Scheme, today, has become India’sflag shipprogramme for the integrateddevelopment of children from pre-natal to 6years of age. It represents one of the world’sLargest and most unique programmes forearly childhood development. ICDS is India’sresponse to the challenge of providing pre-school education to children on one andbreaking the vicious cycle of malnutrition,morbidity, mortality, and reduced learningcapacity on the other. One of the keyobjectives of the programme is to improve thenutritional and health status of children in theage group of 0-6 years. This objective issought to be achieved by providing a packageof six services comprising of supplementarynutrition, non formal pre-school education,nutrition and health education, immunization,health check ups, and referral services, tochildren below 6 years and pregnant womenand lactating mothers. Implemented througha network of over one mill ion village/habitation-level Anganwadi Centres (AWCs),the programme currently covers about 7.90crore children (6 months to 6 years) and 1.82crore pregnant & lactating mothers (as on 31

March 2012) under its supplementary nutritioncomponent.

Cost Estimation (RUPEES IN LACS)Plant Capacity 640 MT/DayLand & Building (2.5 Acres) Rs. 797 LacsPlant & Machinery Rs. 450 LacsW.C. for 2 Months Rs. 13,932 LacsTotal Capital Investment Rs. 15,246 LacsRate of Return 22%Break Even Point 40%******************************************************

WHEAT FLOUR MILL (ATTA,MAIDA, SUJI & BRAN)

[EIRI-1773]The plant will have facility to produce, Maida,Sooji, Atta and bran. These products will besold as per the guidance issued for Food andCivil Supplies Department of the concernedstate. The same plant can be used to processother cereals such as rice gram, dal etc.However, attempt is made have to examinefeasibility and profitability of processing wheatto produce Maida, Sooji, Atta and bran. Flourmill serve the purpose of processing wheatto convert it into flour. Wheat grains are theseeds of the wheat plant which is able to growis kinds of soil and under widely differingclimatic conditions. The principle wheat ofcommerce belong to the botanical groupsTriticum vulgane, Triticum drum and triticumcompactum.

Cost EstimationPlant Capacity 100 MT./DayLand & Building (10,000 sq.mt.) Rs. 16.02 Cr.Plant & Machinery Rs. 4.34 Cr.W.C. for 1 Month Rs. 5.68 Cr.Total Capital Investment Rs. 26.23 Cr.Rate of Return 38%Break Even Point 40%*****************************************************

DISPOSABLE PLASTICSYRINGES (2 ml. and 5 ml.

Size) [EIRI-1774]Disposable Plastic Syringes are being usedby doctors to inject medicines throughIntravenous or intramuscular ways for thetreatment of diseases & also by research &development personnel. Disposable syringesare made of plastic material and are used inthe field of medical and veterinary science.Disposable syringes are mostly injectionmoulded from polypropylene. Syringes areavailable in sizes of 1 ml, 2 ml, 5ml and 10ml,50ml in a variety of designs and consist ofeither two or three components construction.The number and size of injection mouldingmachines required depend upon syringeconstruction, number of mould cavities,annual production.

Cost EstimationPlant Capacity 20000.00 NOS/DayLand & Building (1000 Sq.Mtr) Rs. 63.00 LacsPlant & Machinery Rs. 70.00 LacsW.C. for 1 Month Rs. 7.00 LacsTotal Capital Investment Rs. 1.49 CrRate of Return 20%Break Even Point 66%****************************************************

Hi-Tech Projects,Dec’16, www.eiriindia.org # 10

Best Industries to Start and Grow

Patrons, deposit amount in EIRI AccountHDFC BANK CA-05532020001279(RTGS/NEFT/IFSC Code: HDFC0001981)

FORMALDEHYDE RESINS(PHENOL (PF), MELAMINE (MF)

& UREA (UF) RESINS)[EIRI-1775]

Approximately 1 million metric tons of urea-formaldehyde resin are produced annually.More than 70% of this urea-formaldehyderesin is used by the forest products industryfor a variety of purposes. The resin is used inthe production of an adhesive for bondingparticleboard (61% of the urea-formaldehydeused by the industry), medium densityfiberboard (27%), hardwood plywood (5%),and a laminating adhesive for bonding (7%),for example, furniture case goods, overlaysto panels, and interior flush doors.

Cost EstimationPlant Capacity 28.00 MT./DayLand & Building (3 Acres) Rs.6.82 CrPlant & Machinery Rs. 2.03 CrW.C. for 1 Month Rs. 4.37 CrTotal Capital Investment Rs. 13.65 CrRate of Return 39%Break Even Point 42%************************************************************

PET RESIN FROM ETHYLENEGLYCOL AND TEREPHTHALIC

ACID [EIRI-1776]Poly (ethylene terephthalate), or PET, is athermoplastic polyester resin. Such resinsmay be classified as low-viscosity or high-viscosity resins. Low-viscosity PET typicallyhas an intrinsic viscosity of less than 0.75,while high-viscosity PET typically has anintrinsic viscosity of 0.9 or higher. Low-viscosity resins, which are sometimesreferred to as “staple” PET (when used intextile applications), are used in a wide varietyof products, such as apparel fiber, bottles, andphotographic film. High-viscosity resins,sometimes referred to as “industrial” or “heavydenier” PET, are used in tire cord, seat belts,and the like.

Cost EstimationPlant Capacity 33.33 MT./DayLand & Building (4 Acres) Rs. 12.45 CrPlant & Machinery Rs. 18.82 CrW.C. for 3 Months Rs. 22.53 CrTotal Capital Investment Rs. 55.20 CrRate of Return 22%Break Even Point 54%***********************************************************

MANUFACTURING OF DAIRYPRODUCTS (Ghee, Butter, Milk

Powder) [EIRI-1777]Dairy industry is of crucial importance toIndia. The country is the world’s largest milkproducer, accounting for more than 13% ofworld total milk production. It is the worldlargest consumer of dair y products,consuming almost 100% of its own milkproduction. Dairy products are a major sourceof cheap and nutritious food to millions of

people in India and the only acceptablesource of animal protein for large vegetariansegment of Indian population, particularlyamong the landless, small and marginalfarmers and women. India’s high-value, high-volume market for traditional dairy productsand delicacies is all set to boom further underthe technology of mass production. Thismarket is the largest in value after liquid milkand is estimated at US $3 billion in India andUS$1 billion overseas.

Cost EstimationPlant Capacity 1,00,000 LTR/DayLand & Building (3 Acres) Rs. 3.74 CrPlant & Machinery Rs. 7.41CrW.C. for 2 Months Rs. 20.00 CrTotal Capital Investment Rs. 31.74 CrRate of Return 33%Break Even Point 43%*****************************************************

JAGGERY PLANT [EIRI-1778]Jaggery or gur is a specific type of sugarpopular in India. It is normally manufacturedfrom either sugar cane or date palms, butrecent trends in its manufacture have resultedin jaggery made from the sap of coconut andsago palms. While jaggery is useful incooking, it is also an ancient part of Ayurvedicmedicine and has spiritual significance inIndia too. This type of sugar is consideredunrefined and is produced by boiling rawsugar cane or palm juice in iron pans. It isthen formed into blocks. Because it does notgo through additional processing, it doesretain some of the natural vitamins andminerals of the ingredients used, thoughboiling the juice does deplete some of these.Many people do consider jaggery healthierthan more refined sugar since it is lessstripped of natural nutrients.

Cost EstimationPlant Capacity 50 TON/DayLand & Building (6 Acres) Rs. 19.62 CrPlant & Machinery Rs. 3.45 CrW.C. for 2 Months Rs. 4.00 CrTotal Capital Investment Rs. 27.61 CrRate of Return 21%Break Even Point 56%***************************************************

DIAMMONIUM PHOSPHATE(DAP)

[EIRI-1779]Diammonium phosphate (DAP) (chemicalformula (NH4)2HPO4, IUPAC namediammonium hydrogen phosphate) is one ofa ser ies of water-soluble ammoniumphosphate salts that can be produced whenammonia reacts with phosphoric acid. Soliddiammonium phosphate shows a dissociationpressure of ammonia as given by the followingexpression and equation:

Cost Estimation (RUPEES IN LACS)Plant Capacity 75 MT/DayLand & Building (5 Acres) Rs. 1.130 LacsPlant & Machinery Rs. 1.000 LacsW.C. for 3 Months Rs. 3.329 LacsTotal Capital Investment Rs. 5.530 LacsRate of Return 25%Break Even Point 48%***************************************************

I M F L & COUNTRY LIQUOR[EIRI-1780]

Gin, vodka, and related spirits like aquarit aredistinguishable from whisky, rum and brandywhich themselves have a number of commoncharacteristics. The most evident differenceis in colour, with gin an vodka normally beingcolourless white whisky, rum and brandy varyin shade from straw-coloured to the deepestbrown. This immediate difference is linkedwith distinguishing features of compositionand flavour which are reflected in the methodsof production of the two troup of sprits. Theaurd whisky comes from the Gaelic wordwisge-beatha, as the Irish called it, incomingthe water of life. The colour in whisky, rumand brandy oves it origin to the practice ofageing or maturing these spirits in woodencasks, which as containers have previouslyused for transporting some compatible liquidsuch as slerry, wine or molasses. Residuesof previous contents, together with substanceextracted from the wood itself, serve togive the maturing spirit a brown colour whichin interest of standardization, issupplemented by the addition of caremel.The requirement for maturation in wood isnow codified in lay standing whisky is thepotable spirit obtained by distillation of anaqueous extract of an infusion of mattedbarley and after cereals that has beenferr iented with strains of sacctromyusceramisial. Various types of whisky areproduced in a number of different countriesin the world.

Cost EstimationPlant Capacity 60,000 Ltr./DayLand & Building (10 Acres) Rs. 10.56 Cr.Plant & Machinery Rs. 28.56 Cr.W.C. for 3 Months Rs. 25.86 Cr.Total Capital Investment Rs. 73.19 Cr.Rate of Return 82%Break Even Point 37%***************************************************

MALACHITE GREEN[EIRI-1781]

The triarylmethane dyes are of brilliant hue,exhibit high tinctorial strength, are relativelyinexpensive, and may be applied to awide range of substrates. However, theyare seriously deficient in fastness properties,especially fastness to light and washing.Because of these deficiencies, the use oftriarylmethane dyes on textiles has decreasedas dyes from other chemical classes withsuperior properties have become available.However, the most important commercialblack dye for acidmodified fibers is till amixture of the classical triarylmethane dyes,malachite green and fuchsine, because ofhigh tinctorial strength and low cost.

Cost EstimationPlant Capacity 2000.00 KG/DayLand & Building (1500 Sq.Mtr) Rs. 1.38 CrPlant & Machinery Rs. 45.00 LacsW.C. for 3 Months Rs. 2.39 CrTotal Capital Investment Rs. 4.57 CrRate of Return 61%Break Even Point 28%

To get Loan/Finance from Banks/Finacial Institutes.

To set up your own Industry/Unit

To have Detailed & Exhaustive Data on any Project.

A complete List of Industrial Project Reports are given on www.eiribooksandprojectreports.com

EACH DETAILED PROJECT REPORT CONTAINS:INTRODUCTION : Project Mix, Uses & Applications, Quality Control Measure & Their Introduction for Attaining RequiredProperties Economy & Productivity Competence.

MARKET SURVEY : Market Position, Installed Capacity Production, Anticipated Demand, Present Manufacturers,Statistics of Imports & Exports, Estimated Demand, Demand & Supply Gap (If available), LI/IL Issued Recently

PROCESS OF MANUFACTURE : Inventory Controls & Tests, Comparative Study of Process for Manufacturing theProduct, Formulations, Process Flow Sheet Diagram, Process Detail in Stages from Raw Materials to Finished Products

RAW MATERIALS : Raw Material Specifications, Market Codes & Raw Material Prices, Sources of Procurement ofRaw Materials [Imported/Indigenous]

PLANT & MACHINERY : Range of Machineries Required, Detailed Specifications of Machines & Equipmants, Pricesod Machineries, Suppliers of Plant and Machineries.

LAND & BUILDING : Total Land Area Requirement with Rates, Covered Area Break-up with Estimated Costs ofConstruction

PROJECT ECONOMICS : Land & buildings, Plant, Machinery & Other Fixed Assets, Total Capital Investment, WorkingCapital Assessment, Raw Material & Consumable Stores, Staff Salaries & Wages, Utilities & Overheads, Total Cost ofProject, Sources of Finance/Refinance, Break Even Point Determination.

* EIRI Project Reports are prepared by highly qualified & experienced consultants &Market Research and Analysis supported by a panel of Experts and Computerised.

* Data provided are reliable and uptodate collected from manufacturers/suppliers, plantalready commissioned in India.

EIRI Technocrats and Engineers have just prepared“MARKET SURVEY CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORTS”

on following lucrative products which are most viable and profitable and having bright future scope

For assessing Market Potential, Corporate Diversifications,Planning, Investment Decision Making and to start your own setup,Entrepreneurs and Industrialists are most welcome to contact EIRI.

* COPPER SULPHATE FROMCOPPER ASH/SCRAPCHELATED ZINC (ZN-EDTA)12%

* ORTHOPAEDIC IMPLANTSAND INSTRUMENTSBARLEY MALT

* MINERAL TURPENTINE OIL(M.T.O.) FROM PETROLEM(SUPERIOR KEROSENE OILOR OTHER MATERIAL)

* M.S.FASTENERS AND S.S.FASTENERS

* P.V.C. COMPOUNDING(FRESH) FOR CABLES ANDPVC PIPES

* BANANA FIBRE EXTRACTIONAND HAND MADE PAPERBANANA & ITS BY

PRODUCTS* COLOUR AND ADDITIVES

MASTERBATCHES* METALLIC STEARATE* SURGICAL METHYLATED

SPIRIT* KHADSARI SUGAR (500 TCD)* COTTON (RUI) FROM WASTE

COTTON CLOTH* LAUNDRY & DRY CLEANERS* COATED YARN* TOUGHENED GLASS* CAUSTIC SODA (SODIUM

HYDROXIDE) (NaoH)ELECTROLYTIC PROCESS

* PLASTIC WASTE RECYCLINGUNIT & PYROLYSIS PLANTFROM PLASTIC AND RUBBERWASTE (INTEGRATED UNIT)

* CHITIN & CHITOSAN FROMPRAWN SHELL WASTE

* PASTA PRODUCTION PLANT(SHORT PASTA)

* SODIUM HYDRO SULFITETHROUGH FORMALDEHYDEROUTE CAP-20 TPD

* SODA ASH PLANT FROMSOLVAY PROCESS

* ONION, AND GARLICPOWDER WITH GRAPEDEHYDRATION (RAISINS)

* FLUSH DOORS* DI-METHYL PHTHALATES

(DMP)* GLUTEN FREE BEER

* PVC AND PP FILES ANDFOLDERS

* SULFAMIC ACID PURECRYSTAL AND OTHER GRADE(GP,SR & TM GRADE)

* DECORATIVE LAMINATEDSHEET (SUNMICA)

* ALPHA CELLULOSE POWDERFROM COTTON WASTE

* CAST POLY PROPYLENEFILMS ( CPP FILM)

* CASHEW NUT PROCESSING* BIOGAS PRODUCTION (1500

CUBIC METER PER DAY)* SOYA MILK AND PANEER* MINERAL TURPENTINE OIL

(MTO)

EIRI is an expertIndustrial Consultantworking over 35 years

and specialized toprepare all types ofDetailed Project

Reports based onclients requirements.Do Contact Today at:

eiritechnology@gmail.com

Hi-Tech Projects,Dec’16, www.eiriindia.org # 11

Hi-Tech Projects,Dec’16, www.eiriindia.org # 12

* STEEL FABRICATION* STEEL ROLLING MILL

(REINFORCEMENT BAR)* ACRYLIC BATH TUB BY

ACRYLIC SHEET* FABRICATION OF HEAT

EXCHANGER* KITCHEN PRODUCTS

MADE OF STAINLESS STEEL* ALUMINIUM BEVERAGE CAN* STEEL ROLLING MILL (BY

INDUCTION FURNACE FROMSTEEL SCRAP & SPONGIRON

* M.S. BILLET CASTING WITHINDUCTION FURNACEFROM STEEL SCRAP &SPONGE IRON

* PROCESSING OF LOWGRADE TUNGESTEN OREFULL BODY & CHASSISSBUS PLANT

* ASSEMBLY OF AIR –CONDITIONER/CHESTFREEZER/REFRIGERATOR

* G.I.LADDER & PERFORATEDTRAYS

* ALUMINIUM DOORS &WINDOWS (ALUMINIUMFABRICATION)

* LEAF SPRINGS FORTRACTOR DRAWNTROLLEYS & FOURWHEELER TEMPOS

* STEEL BRIGHT BARS* AUTOMOTIVE ENGINE VALVE* AUTOMOTIVE BRAKING

SYSTEM* DISPLAY COOLER* ERW STEEL PIPES & TUBES* STEEL INGOTS* TMT STEEL BARS (SARIYA)* AUTOMOBILE TRACTORS* ACTIVATED ALUMINA BALLS* ALUMINIUM FOIL* STONEWARE PIPE

(S.W.PIPE)/ CLAY PIPE* IRON ORE PELLETIZATION* ELECTRIC CONTROL PANEL* SOLAR PV POWER PLANT* MACHINE SHOP (FOR OIL

AND GAS ENGINEERINGINDUSTRY, AEROSCAPEENGINEERING INDUSTRY)

* STEEL BRIGHT BARS* CEILING FAN* COPPER STRIP COILS FROM

SCRAPS* PRODUCTION OF PV

PANELS (SOLAR PV PANELS)* ROTARY AIR LOCKS, SCREW

CONVEYOR, MOTORIZED/PNEUMATIC DAMPER, FLAPVALVES, AIR SLIDESREQUIRED IN CEMENTPLANTS AND THERMALPOWER PLANT

* ALUMINIUM EXTRUSION

* ALUMINIUM COIL COATINGFOR ACP AND ROOFING IND.

* PAVING BLOCK* WIRE NAILS* TMT STEEL BARS* FASTENERS/NUT & BOLTS

(INDUSTRIAL &AUTOMOBILE)* HYDRAULIC CYLINDERS* DISPOSABLE SYRINGES

WITH NEEDLE PLANT* FABRICATION UNIT

(PRESSURE VESSEL,REACTOR VESSEL &AGITATORS, HEATEXCHANGERS) & SEAMLESSPIPES AND TUBES

* COPPER POWDER FROMCOPPER SCRAP

* STONE CRUSHER* PRODUCTION OF ALL

TYPES OF FANS SUCH ASAXIAL FANS,CENTRIFUGALFANS (SMOKE EXTRACTFANS & FRESH AIR SUPPLYFANS), BATHROOM FANSETC.

* STONE MINING* MAHINDRA CAR

DEALERSHIP WITHAUTOMOBILE SERVICESTATION/GARAGE

* AUTO FILTERS (AIR FILTERS,OIL FILTERS & FUEL FILTERS)

* AAC & ACSR ALUMINIUMCONDUCTORS

* MANGANESE ORE JIGGING* STEEL TRANSMISSION LINE

TOWERS AND ROLLING MILLTO PRODUCE STEELSECTIONS

* FERRO SILICON (FROMMINERAL INGREDIENTS)STAINLESS STEEL TUBES

* M.S.FASTENERS ANDS.S. FASTENERS

* PREFABRICATED STEELFRAMED BUILDINGMANUFACTURING PLANT

* LEAD ACID BATTERY* GALVANISED WIRE* POWER TRANSFORMER

(50 KVA TO 2000 KVA)* M.S. PIPE* GALVANISED IRON SHEETS* M.S.BILLETS* STEEL GRATING

(GALVANISING ELECTROFORGED STEEL GRATING)

* ALLOY WHEELS PLANT* ESTABLISHMENT OF

MANUFACTURING OFREFRIGERATING APPLIANCE

* WELDED WIRE MESH* ALUMINIUM COLD

ROLLING MILL FORSHEETS & CIRCLES

* ALUMINIUM ROLLINGMILL FOR MANUFACTURINGALUMINIUM CIRCLES

REQUIRED FORPRESSURE COOKERS,NON STICK COOKWARES& CIRCLES

* LPG CYLINDER* ALUMINIUM COMPOSITE

PANNELS* DEEP FREEZER

ENVIRONMENTALCLEARANCE FOREXPANSION OF INGOTS/BILLETS PLANT

* FERRO SILICON BYSMELTING PROCESS

* ALUMINIUM CONDUCTOR* PRESTRESSED

CONCRETE POLES* FASTENERS (NUT & BOLT)

USED IN OIL AND GAS* ALUMINIUM ALLOY PLANT* STAINLESS STEEL SINKS* ALUMINIUM ALLOY PLANT* P.V.C BATTERYSEPARATOR* AUTOMOTIVE TYRE AND

TUBE VALVES (VALVESMANUFACTURING)

* PRESSURE COOKWAREALUMINIUM, STAINLESSSTEEL & HARD ANODIZED

* ELECTRIC WATER HEATER* SOLAR WATER HEATER

DOMESTIC & INDUSTRIAL* CORRUGATED

COLOURED ROOFINGGALVANISED IRON SHEET

* PRESSURE DIE CASTING* G.I.WIRE AND BARBED

WIRE* G.I.WIRE & M.S. BINDING

WIRE* HOT DIP GALVANIZING

PLANT FOR STRUCTURALSTEEL AND PIPES

* COLD ROLLING MILL* DOOR HINGES (MILD

STEEL AND STAINLESSSTEEL)

* PRESSURIZED AEROSOLS(LIKE BODY SPRAYS,PERFUMES, SHAVINGFOAM AND SHAVING

LOTIONS ETC.)* ANHYDROUS SODIUM

DITHIONITE PRODUCTION(SODIUM FORMATEPROCESS)

* SODA ASH PLANT (FROMSOLUTION BRINE)

* SISAL FIBREREINFORCED

* CEMENT ROOFING SHEET* HIGH ALUMINA

REFRACTORY BRICKPLANT

* CATHETERSMANUFACTURING

* SURGICAL RUBBERDISPOSABLE GOODS

* POULTRY AND HATHERYFARMING

* MILK PROCESSING PLANT* ROASTED, SALTED ALMONDS,

PEANUTS FOR PACKING IN25g, 50g,250g & 500g SACHET-S

* BEER FROM POTATOES* GUAR GUM POWDER* AUTOMATIC WHITE BREAD

MAKING PLANT* AUTOMATIC BISCUIT MAKING

PLANT* FROZEN FOOD BY IOF

TECHNOLOGY* WALNUT PROCESSING PLANT* WHIPPING CREAM FRUITS &

VEGETABLES POWDER UNIT(EXPORTS ORIENTED UNIT)

* NATURAL MEDICINE &RESEARCH INSTITUTEWITH 150 BEDS HOSPITAL

* PACKAGED DRINKING WATER(PACKED IN 330 ml CUP, 500MLBOTTLE, 1500 ML BOTTLE AND20 LTR. JAR)

* COLD STORAGE(CONTROLLED ATMOSPHEREOR CA) FOR POTATO CAP:1,00,000 BAGS (50 Kg/Bag),STORING CAP: 5000 Mt,SOLVENT EXTRACTION& REFINING (SOYABEAN) (Cap-250mt/day & 50mt/Day oilRefining)

* BOTTLING PLANT (WHISKY,BRANDY, RUM, VODKS, GIN)FROM RECTIFIED SPIRIT/ENALUBE OIL BLENDING ANDGREASES PLANT

* COLD STORAGE FOR POTATO1,00,000 BAGS (50 KG/BAG)

* MAIZE FLOUR & BY PRODUCTMANUFACTURING PLANT

* CUT FLOWER (GLADIOLI,MARIGOLD, STATICE,CHRYSANTHEMUM ROSEWITH GREEN HOUSE)

* CATTLE FARMING ANDDAIRY PRODUCTS

* COLD STORAGE FORPOTATOAND OTHER HORTICULTUREPRODUCTS Cap:- 5000 Mtor 100000 Bags (50 Kg/Bag)

* DEXTROSE PLANT* SBR RUBBER SHEETS AND

SHOE MANUFACTURING* CASHEW NUT PROCESSING* PLYWOOD AND PLYBOARD

PARTICLE BOARD ANDLAMINATED PARTICLE BOARD

* VENEER MAKING, PLYWOOD& PLYBOARD MAKING

* WALNUT & PINUS(CHILGOZA)OIL, SHELL POWDERPROCESSING PLANT

* COUNTRY LIQUOR BOTTLINGPLANT (1,00,000 BOTTLES/DAY)

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

Hi-Tech Projects,Dec’16, www.eiriindia.org # 13

* PLASTIC GRANULES FROMPLASTIC WASTE

* ROPE AND SUTLI MAKINGPLANT

* BOTTLING PLANT (COUNTRYLIQUOR) 10,000 LTRS./DAY)

* I.V. FLUID (FFS OR BFSTECHNOLOGY)

* TOXIN PAN MASALA,TOBACCO LESS GUTKHAAND ZARDA

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* UPVC DOORS & WINDOWSFABRICATING PLANT (Fixingand Installation of Door andWindows of uPVC profiles)

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* MUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)

* MEDICAL COLLEGE WITH750 BEDS HOSPITAL FACILITY

* MICRO IRRIGATIONPRODUCT MANUFACTURINGPLANT

* HOT DIP GALVANIZINGMUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)CEMENT TILES, CANAL LINESLAB, KERV STONE, PAYERRCC PIPE, MANOHOLECOVER,ENTERLOCKING ETC.MANUFACTURING PLANT

* MEDICAL COLLEGE (100STUDENT INTAKECAP. MEDICAL COLLEGEWITH 500 BED HOSPITAL)

* ESTABLISHMENT OF APRIVATE UNIVERSITY

* DIGITAL INKS* GALVANIZING PROCESS

PLANT FOR ELECTRICALPOLES

* MAIZE PROCESSING PLANT* STARCHES / MODIFIED

STARCHES/ LIQUID GLUCOSE/ DEXTROSE MONOHYDRATE/GLUCOSE SYRUPS / CORNSYRUP SOLIDS / HIGHMALTOSE CORN SYRUPS /MALTO DEXTRINE POWDER /CORN GLUTEN MEAL (60%)MAIZE OIL / SORBITOL.

* BABY CARE PRODUCTS* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* BOTTLING OF WHISKY* UPVC DOORS & WINDOWS

PROFILES* EPDM RUBBER PROFILES* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* FAST FOOD RESTAURANT

WITH CENTRALLISEDKITCHEN

* READY MADE GARMENT(T-SHIRT/POLO GOLFER/WOVEN SHIRTING & SUITINGFOR UNIFORMS/SWEATERS)MANUFACTURING

* BIO-DIESEL EXTRACTIONFROM JATROPHA,SOYABEAN, SUNFLOWER,RICE BRAN, ALGE &CULTIVATION OF JATROPHA

* FAST FOOD RESTAURANTCHAIN WITH CENTRALLISEDKITCHEN

* GUAR SPLIT POWDER ANDOTHER BY PRODUCTS

* SOLVENT EXTRACTIONPLANT (COTTON SEED)

* RASGULLA MANUFACTURINGAND CANNING

* CULTIVATION OF RICE &WHEAT COMMERCIAL &MECHANISED DEVELOPMNT

* MAIZE & BY PRODUCTSPROCESSING -STARCHMODIFIED STARCHES/LIQUIDGLUCOSE/DEXTROSEMONOHYDRATE/GLUCOSESYRUPS/CORN SYRUPSOLIDS/HIGH MALTOSECORN SYRPS/ MAITODEXTRINE POWDER/CORNGLUTEN MEAL (60%) MAIZEOIL/SORBITOL

* TEAK FARMING* ARTIFICIAL MARBLE

(SYNTHETIC)* POTATO STARCH CARDANOL

FROM C.N.S.L. (CASHEWNUTSHELL LIQVID

* INTEGRATED SCRAP YARD* POTATO STARCH* MANGO PULP (5 TON/HOUR

200 KG ASEPTIC PACKAGING)* BOTTLING PLANT (WHISKY,

BRANDY, RUM, VODKA, GIN)FROM RECTIFIED SPIRIT/ENA

* COW DAIRY FARMING(AYRSHIRE/HOLSTEIN) ANDMILK PROCESSING MILK/DAYCAP-50,000 LTR/DAY

* WHEAT FLOUR MILL* CHAKKI FLOUR MILL* I.V. FLUID (FFSTECHNOLOGY)* LIQUID GLUCOSE FROM

POTATOES* SORBITOL FROM MAIZE

STARCH* WALNUT PROCESSINGPLANT* SOLVENT EXTRACTION AND

OIL REFINERY CUM PACKINGOF RICE BRAN OIL

* COTTON SEED OIL SOLVENTEXTRACTION PLANT

* MARINE TRAINING INSTITUTE& PLACEMENT SERVICEPROVIDING AGENCY

* I.V.FLUID (FFS TECHNOLOGY)* CERAMIC FIBERS, CERAMIC

FIBRE BLANKET, CERAMICFIBRE BOARD AND CERAMICFIBRE ROPE

* COLD SUPPLY CHAIN* LAMI TUBE MANUFACTURING* EYE DROP 3 PIECES

(PLASTIC VIALS)* PET BOTTLES (CAMBER/

CLEAR IN COLOUR) CAP:15ML,60ML 100ML,135ML,200ML & 500ML

* BENZYL ALKONIUMCHLORIDE (BKC)

* NATURAL SUGAR WAX* MARGARINE BUTTERFROM

VEGETABLE OIL* GREEN HOUSE FOR CROP

PRODUCTION* ORGANIC DAIRY FARMING* E-WASTE* BIO-DIESEL FROM ALGAE* VANADIUM PENT OXIDE

GRAPHITE MINING ANDBENEFICIATION PLANT

* VITAMIN WATER* PET PREFORM CUM PET

BOTTLES* ORGANIC DAIRY FARMING

AND PRODUCING WHOLEMILK POWDER (WMP)

* HDPE BOTTLES* CAUSTIC SODA FROM

SODIUM CHLORIDE* COAL TAR PITCH* MOSQUITO REPELLANT* WRIST BAND* CASTOR OIL AND ITS

DERIVATIVES OLEO RESIN,TURKEY RED OIL, DCO, HCO,SEBACIC ACID, 12-HYDROXYSTEARIC ACID

* PAPAIN FROM PAPAYA* PROCESSED CHEESE* MONOCHLOROBENZENE* EUGENOL FROM CINNAMON

OIL* SULPHUR 80% WDG* CERAMIC FIBERS,

CERAMIC FIBRE BLANKET,CERAMIC FIBRE BOARDAND CERAMIC FIBRE ROPE

* SCREEN PRINTING* DI CALCIUM PHOSPHATE

FROM ROCK PHOSPHATE& HAIFA PROCESS

* PVC FLEXIBLE PIPE* FLEX BANNER USED IN

DIGITAL PRINTING* PIGMENTS BINDERS FOR

TEXTILE PRINTING* POULTRY & HATCHERY FARM* ALOEVERA JUICE AND GEL* LIME PUTTY* AUTOMOBILE WORKSHOP/

GARAGE* EGG TRAY FROM PULP* CARDANOL FROM C.N.S.L.* OXYGEN GAS

* POLYALUMINIUM CHLORIDE* NAMKEEN INDUSTRY

(BHUJIA, CHANACHUR ETC.)* POLYOL USED FOR

POLYURETHANES* POLYSTYRENE POLY

PROPYLENE OXIDE* DIETHYL PHTHALATE* UREA FORMALDEHYDE AND

MELAMINE* FORMALDEHYDE MOULDING

POWDER* INSTANT COFFEE* ANNATTO SEED COLOUR

EXTRACTION* FRUITS AND VEGETABLES

DRYING BY (FREEZE DRYINGMETHOD)

* BIO GAS PRODUCTION ANDBOTTLING PLANT

* JAM, JELLIES, FRUIT JUICEAND ALLIED PRODUCTSMATERNITY NURSING HOME

* CANNING & PRESERVATIONOF VEGETABLES

* CURCUMIN & TURMERIC OILFROM TURMERICDETERGENT WASHINGPOWDER (ARIEL TYPE)

* GRANITE SLAB AND TILES* TEA PACKAGING* PAN MASALA & GUTKHA* PRESTRESSED CONCRETE

ELECTRIC POLES* LEATHER SHOES* ROTOGRAVURE PRINTING

(FOR FLEXIBLE PACKAGING)* AUTOCLAVED AERATED

CONCRETE BLOCKS* OXYGEN AND NITROGEN

GAS PLANT* MANGANESE ORE

BENEFICATION* MINERAL WOOL* CALCIUM SILICATE* TOUGHENED GLASS* HUMIC ACID* OFFSET PRINTING UNIT

(5 COLOUR)* CASTOR OIL AND ITS

DERIVATIVES OLEORESIN* TISSUE PAPER PULPING

FROM SAW DUST* KNITTED GLOVES* RADIATOR COOLANT* LATEX FOAM RUBBER

(SPONG RUBBER)* GARLIC OIL AND POWDER* ACTIVATED CARBON &

SODIUM SILICATE FROMPADDY/ RICE HUSK

* TRIETHYLENE GLYCOL* RAMMING MASS* WOOD PEELING &

VENEER MAKING* PETROLEUM JELLY* DAIRY FARM (COW &

BUFFALO) TO PRODUCE

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Hi-Tech Projects,Dec’16, www.eiriindia.org # 14

MILK & PACKAGING INPOUCHES

* CUTTING OIL LIQUID GOLD(IN PASTE FORM)

* P.V.C. LEATHER CLOTH(REXINE)

* COAL TAR DISTILLATION* ALUMINIUM LABEL PRINTING* FOLDING CARTNS/MONO

CARTONS* SURGICAL DISPOSABLE

GLOVES (DIPPED RUBBERGOODS)

* AGRICULTURAL CHEMICAL(PLANT GROWTH PROMOTERAND PLANT GROWTHREGULATOR)

* MENTHOL BOLD CRYSTALSFROM MENTHOL FLAKES

* ORGANIC FARMING* CORRUGATED

POLYCARBONATE SHEET* COLD STORAGE* FLAT PVC LAMINATED* SAFTY GLASS/TOUGHENED

GLASS* PLASTIC GRANULES FROM

WASTE* DRY WALL PUTTY (WHITE

CEMENT BASED)* CHARCOAL BRIQUETTE* OXALIC ACID FROM

MOLASSES* POTATO GRANULES* SANITARY NAPKINS & BABY

DIAPERS* CORRUGATED BOXES* PLASTER OF PARIS* RUBBER ROLLER FOR

PRINTING MACHINE* LACTIC ACID* EMERY PAPER (SAND PAPER)* RUBBER RECLAIM SHEET

FROM USED BUTYL TYREAND TUBE

* MANGO PULP* PARTICLE BOARD FROM

BAGASSE AND RICE HUSK* TOILET PAPER & NAPKINS* TENDER COCONUT WATER* CALCIUM CARBONATE* LIME CALCINATION PLANT* INJECTION MOULDED

PLASTIC COMPONENTS* HYDRATED LIME* BLACK PEPPER* MULTIAXIAL GLASS FABRIC* LIQUID TOILET CLEANER

(HARPIC TYPE)* LIME & PRECIPITATED* CALCIUM CARBONATE* LIQUID GLUCOSE FROM

BROKEN RICE

* MEDICAL DISPOSABLEPLASTIC SYRINGES

* METAL POLISHING BAR* SANITARY NAPKINS & BABY

DIAPERS* PERFUMES/ATTAR* GEMS AND JEWELLERY* MULTIAXIAL GLASS FABRIC* ACTIVE ZINC OXIDE* COPPER PHTHALOCYANINE* TURMERIC OIL EXTRACTION

FROM DRY TURMERIC* CNSL BASED RESIN IN

LIQUID & POWDER FORMBOPP FILM

* BETA IONONE* BIO-FERTILIZER* ZINC & COPPER SULPHATE* PAPER BASED PHENOLIC

SHEET (FOR ELECTRICALAPPLIANCE)

* THINNERS (WHITE SPIRITBASED)

* SINGLE SUPER PHOSPHATE& SULPHURIC ACID

* MONO CALCIUM PHOSPHATE& DI-CALCIUM PHOSPHATE

* FLEXIBLE P.U. FOAM* ASPIRIN* SORBITOL FROM MAIZE

STARCH* SPICE OIL & OLEORESIN* ANTI-FOAMING AGENT

(SILICONE BASED) FORDISTILLERY, SUGAR, PAPERPLANT ETC.

* LAUNDRY & DRY CLEANER* BRICKS FROM STONE DUST* CARBOXY METHYL STARCH* TITANIUM DIOXIDE* UNDECYENIC ACID* PSA BASED NITROGEN

GENERATOR* SYNTHETIC IRON OXIDE* PVC INSULATION TAPE* TAMARIND KERNEL POWDER* ORGANIC CHEMICAL &

SOLVENTS* PLASTICIZERS* ICE PACK (SOLUTIONS

TYPE, VIOLET-SEMI SOLIDPOLYMER TYPE)

* GUM FROM TAMARIND* PEARL SUGAR CANDY

(MISHRI)* GOAT & SHEEP FARMING* GYPSUM PLASTIC BOARD

(AUTOMATIC PLANT)* NON-WOVEN INDUSTRY

(CARRY BAGS, SURGICALGOWN, FACE MASK, ROUNDCAPS, SHOE COVER, GLOVE)

* COTTON SPINNING, SIZING,

YARN, DYEING & WEAVING* CALCIUM CHLORIDE* AMINES & ALLIED PRODUCT* SPINNING COTTON* SILICONE FROM RICE HUSK* ADHESIVE (FEVICOL TYPE)* CAUSTIC SODA FROM

ELECTROLYSIS* CAMPHOR TABLETS* CERAMIC GLAZED WALL

AND FLOOR TILES* ZINC SULPHATE MONO* ETHANOL (BIO FUEL)

FROM RICE STRAW* GYPSUM MOULDING AND

GYPSUM BOARD* SMOKELESS COAL* ACID (SILICA) AND BASIC

RAMMING MASS* UNSATURATED

POLYESTER RESINS* DAIRY (BUFFALO) FARMING

SILICONE FROM RICE HUSK* N-ACETYL THIOZOLIDINE-

4-CARBOXYLIC ACID (NATCA)* PE BASED CARBON BLACK

COMPOUND* ONION DEHYDRATION* PVC PIPES & FITTING* GLASS REINFORCED* GYPSUM MOULDINGS

ABSORBENT COTTON &SURGICAL BANDAGES

* CALCIUM STEARATE BYFUSION PROCESS

* MANGO POWDER & OTHERFREEZE DRIED PRODUCTS

* MENTHOL OIL FROMLEAVES AND MENTHOL

* CRYSTALS (PEPPERMINT)MANUFACTURE OFCELLULOSE ACETATE

* ANTIFOAMING /DEFOAMING AGENT

* ALOEVERA CULTIVATION &PROCESSING

* SYNTHETIC MAGNESIUMSILICATES

* EPHEDRINEHYDROCHLORIDE

* ACTIVATED BLEACHNGEARTH

* TECHNICAL TEXTILES* FORMALIN FROM

METHANOL* CATIONIC SOFTNER

(STEARIC ACID BASED)* PRECIPITATED SILICA* PU BASED FOOT WEARS* FORMALDEHYDE RESIN

(UREA, PHENOL, MELAMINE)* HDPE MONO FILAMEN NET* POTATO & ONION FLAKES

* DUSTLESS CHALK(SCHOOL CHALK)

* TOMATO POWDER* BIODEGRADABLE /

COMPOSTABLE PLASTICS* ACRYLIC CO POLYMER

EMULSION* ESTER GUM (FOOD GRADE)* PROTEIN BASED FOAMING

AGENT* LECITHIN (SOYA BASED)* SOYA OIL AND CATTLE

FEED FROM SOYABEAN

* COMPARISON BETWEENFLY ASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* CELL CAST ACRYLICSHEET

* ACRYLIC BATH TUB ANDSHOWER TRAY

* THERMOCOLE BASEDDISPOSABLE PLATES

* SODIUM SILICATE FROMRICE HUSK

* ETHYL METHACRYLATE* SODIUM LAURYL ETHER

SULPHATE* LATEX GLOVES,

CONDOMS & CATHETER* CALCIUM NITRATE

GRAIN BASED ALCOHOLDISTILLERY

* BULK DRUGS* MARBLE QUARRYING* CULTIVATION OF

CAPSICUM IN GREENHOUSE

* SULPHUR 90% WDG* EGG POWDER* WOOD PLASTIC* COMPOSITE BOARD LINE* SODIUM LAURYL SULPHATE

AND SODIUM LAURYLETHER SULPHATE

* FISH PROCESSING* BABY CEREAL FOOD & MILK

POWDERS (BABY FOOD)* GUR (JAGGERY)* DAIRY PRODUCTS* CHLORINATED PARAFFIN

WAX (CPW)* HAND WASHING

DETERGENT POWDERUSING THE DRY MIXPROCESS INCLUDINGFORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* HANDWASHING DETERGENTPOWDER USING THE DRYMIX PROCESS INCLUDING

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

TERMS AND CONDITIONS

Ask for the quotation for the required project report ateiritechnology@gmail.com or eiriprojects@gmail.com

Mob: +91 9811437895 or +91 9811151047

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)* Ph: +91 9811437895, 9811151047, 91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : eiriprojects@gmail.com, eiribooks@yahoo.com

* Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Deposit the amount in “EIRI “Account with HDFC BANK CA-05532020001279 (RTGS/NEFT/IFSC CODE: HDFC00001981) OR ICICI

BANK CA - 038705000994 (RTGS/IFSC CODE: ICIC0000387) ORAXIS Bank Ltd. CA- 054010200006248 (RTGS/IFSCCODE:UTIB0000054) OR UNION BAK OF INDIA CA-

307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) ORSTATE BANK OF INDIA CA-30408535340 (RTGS/IFSC CODE:

SBIN0001273) & SMS ON PH. 09811437895

FORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* DIGITAL PHOTOPAPER/INKJET PHOTOPAPER

* KAOLIN FOR ROAD MAKING* PEPPERMINT CULTIVATION &

PROCESSING* PEPPERMINT CULTIVATION &

PROCESSING* HDPE PIPE* ACTIVATED CARBON FROM

RICE HUSK* HT & LT INSULATOR, HT AIR

BRAKE SWITCH D.O. FUSE,LIGHTENING ARRESTOR

* PET BOTTLES IN CAP: 500ML,1 LTR, 2 LTRS, 5 LTRS, USEDFOR PACKAGED DRINKINGWATER, EDIBLE OILS

* ALCOHOLIC BEVERAGES(COUNTRY LIQUOR & IMFL)

* QUARTZ BASED INDUSTRIES(QUARTZ POWDER SILICASAND SILICA RAMMINGMASS FUSED SILICA)

* BEEDI (BIDI) BY MACHINE* RICE SHELLER* FRUIT RIPENING CHAMBER* MINERAL WATER AND PET

BOTTLING PLANT* DIAGNOSTIC LAB AND* ONLINE TRADING BUSINESS* CEREAL MILLING* MINI OIL PLANT SUITABLE

FOR GROUNDNUT OIL ANDCOTTON SEED OIL

* CHANACHUR, BHUJIA,GANTHIA (AUTOMATICPLANT)

* KHADYA SURAKSHA (FOODSECURITY)

* PLASTIC WATER STORAGETANKS

* ZINC SULPHATE,MONOHYDRATE & HEPTAHYDRATE

* CIGARETTEMANUFACTURING UNIT

* CATTLE FEED PELLETSPLANT FOR COW &BUFFALOE FOR BOOSTINGMILK AND GROWTHTYRE RECYCLING UNIT

* PAPAIN EXTRACTIONINDUSTRY

* CAKE SHOP* BUSINESS PROCESS

OUTSOURCE (B.P.O.)* EMPTY HARD GELATINE

CAPSULES* BIOFERTILIZER* PLASTIC MOULDING UNIT

(CHAIR, TABLES &VEGETABLE TRAYS)

* GOLD POTASSIUM CYANIDE(G.P.C.)

* HDPE, PVC & CPVC PIPESAND FITTINGS

* NO CARB PASTE(ANTICARBURIZING PASTE-WATER SOLUBLE) FOR HEATTREATMENT

* CONVERSION WASTEPLASTIC WITH TYRE INTOACTIVATED CARBON ANDINDUSTRIAL FUEL

* PYROLYSIS PLANT FROMPLASTIC & RUBBER

* COMPARISON BETWEEN FLYASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* AGAR AGAR* NAIL POLISH* PLASTIC GRANULES FROM

WASTE* AGARBATTI SYNTHETIC

PERFUMERY COMPOUNDS &AGARBATTI COMPOUNDSLIKE (CHAMPA, MOGRA,SANDAL WOOD & LOBAN)

* PET PREFORM AND PETJARS (20 LTRS CAPACITY)

* KRAFT PAPER FROM 100%WASTE PAPER

* PRIVATE UNIVERSITY* LIQUID GLUCOSE AND

MALTODEXTRIN FROMBROKEN RICE

* DRY WALL PUTTY (WHITECEMENT BASED)

* CONSTRUCTION CHEMICALSOT PASTE

* FUSED SILICA FROM SILICASAND

* BANANA CHIPS, BANANAPULP & BANANA POWDER(BANANA PRODUCTS)

* CONFECTIONERY UNIT(TOFFEE, CANDY /LOLLIPOPCHEWING GUM, BUBBLEGUM CHOCOLATE)

* FORMALDEHYDE RESIN(UREA, PHENOL, MELAMINE& THEIR MODIFIED RESINS)

* EPDM RUBBER PROFILES(WEATHER STRIPS,INDUSTRIAL MONOSTRIPSETC)

* GRANITE CUTTING ANDPOLISHING UNIT (100% EOU)

* SURGICAL COTTON, ROLLERBANDAGE, CREPE BANDAGE& PLASTER CART (READYMADE) E.G. GYPSONA 3MCART

* ENTERTAINMENT CLUB,HOLIDAY RESORT, 4 STARHOTEL, AMUSEMENT PARKCUM WATER PARK,MUSHROOM & ITSPRODUCTS, FISH FARMING,LAKE FOR BOATING, DEERPARK ETC.

* HDPE, PVC, LLDPE PIPES/TUBES AND FITTING

* EPOXIDIZED SOYABEAN OIL(SECONDARY PLASTICIZER)USED IN PVC COMPOUND

* POULTRY PROCESSINGPLANT

* B.O.P.P. SELF ADHESIVETAPES

* I.V.SET* MANGANESE OXIDE AND

MANGANESE SULPHATE* ODOURLESS NYLON

GRANULES FROM FIBER OFWASTE TYRE WITHOUTCHANGING PROPERTIES OFNYLON

* PARTICLE BOARD FROM RICEHUSK OR WOOD WASTE ORSUGAR CANE BAGASSE ORMIXED OF ALL ABOVEPOULTRY LAYER ANDBROILER FARMING

* TOMATO, GUAVA AND MANGOPULP

* GREEN HOUSE* HYDROXY PROPYL GUAR

(HPG) AND CARBOXYMETHYL HYDROXY PROPYLGUAR

* BATHSOAP MANUFACTURE* PLASTIC MOULDED CHAIRS

FROZEN POTATO PATTY* CALCIUM ALUMINATE* ACTIVATED CARBON FROM

COCONUT SHELL* RIGID PVC FILM

MANUFACTURE FORPHARMACEUTICALS BLISTER

PACKAGING* NYLONE 66 CURING TAPE

USED IN RUBBER HOSE PIPEWRAPPING

* ANTIFOAMING/DEFOAMINGAGENT LIKE ANTAROL T-709

* SOY AND GLUTEN BASEDMOCK MEAT

* KRAFT PAPER USING WASTEPAPER AND OLDCORRUGATED CARTONS

* GLASS BOTTLE FOR BEERAND BEER MUG (TUMBLER)

* DISPOSABLE SYRINGES ANDNEEDLE PLANT (Single UseSyringes, Single Use Needles &As Syringes)

* DIRECT FILLED BALL PEN(USE AND THROW)

* BENZALKONIUM CHLORIDE* SPINNING COTTON (COTTON

SPINNING PLANT)* CALCIUM CHLORIDE USING

LIME STONE ANDHYDROCHLORIC ACID

* RUBBER POWDER FROMWASTE TYRES

* CALCINATION PLANT FORPYROPHYLLITE ANDDIASPORE MINERALS BYVERTICAL SHAFT KILNPROCESS

* ONION, GARLIC & GINGERDEHYDRATION PLANT

* POTASSIUM NITRATE* POTASSIUM SULPHATE* N.P.K. FERTILIZER* CHICORY EXTRACT

(ROASTED CHICORYGRANULES/CUBES, LIQUIDEXTRACT ETC.)

* SOLID WASTE SEGREGATION* LAMITUBE MANUFACTURE* BOARDING SCHOOL* CERAMIC FUSE TUBE/

BARRELS USED IN HRC FUSE* SODIUM POLYACRYLATE

DISPERSANT FOR USE INWATER BASED PAINT WITHDISPERSANT FOR PIGMENT

* NAIL POLISH, LIPSTICKS,NAIL POLISH REMOVER

* SOYA PRODUCTS (MILK,PANEER, TOFU, BUTTER,CHEESE CURD/YOGURT, ICECREAM) WITH PACKAGINGUNIT

* GREASE MANUFACTURING

Hi-Tech Projects,Dec’16, www.eiriindia.org # 15

Name of Books Rs. US$ Name of Books Rs. US$N Name of Books Rs. US$

CHEMICALS, DYES, LUBRICATINGOILS, PETRO CHEMICALS

ELECTROPLATING

AVAILABLE PROCESS TECHNOLOGY BOOKS AT www.eiriindia.org

* Small Medium & LargeChemical Industries

* Industrial ChemicalsTechnology Hand Book

* Modern Technology ofOrganic & InorganicChemicals

* Electroplating, Anodizing &Surface Finishing Technology

* Hand Book of Agro ChemicalIndust.(Insecticide & Pesticide)

* Technology of Synthetic Dyes,Pigments Intermediates

* Petrochemicals, Lubricants,Greases & Petroleum Refining

* H.B.of Lubricants, Greases &Petrochemicals Technology

* Technology of Gums, Adhesives& Sealants with Formulations

* Hand Book of Adhesiveswith their Formulae (2nd Edn.)

* Adhesives Technology &Formulations Hand Book

* Technology of Glue &Adhesives with AdhesivesBonding and Formulations

* Complete Hand Book onAdhesives and AdhesionTech. with Project Profiles

* Start Your Own ExportBusiness (How To Export)

* Start Your Own SmallBusiness and Industry

* Candle Making Processes &Formulations Hand-Book

* Stationery, Paper Converting& Packaging Industries

* Modern Inks Formulaes &Manufacturing Industries

* Profitable Businesses toStart for Entrepreneurs

* Modern Small & CottageScale Industries

* Profitable Small Cottage Tiny& Home Industries (2nd Edn.)

* Technology of Bio-Fuel(Ethanol & Biodiesel)

* Mod. Tech. of Bioprocessing* ModTech.of BioGas Production

GUMS, ADHESIVES & SEALANTS

BIO FUEL, BIO GAS &BIOPROCESSING

* Tech of Sweets (Mithai)withFormulae

* Technology of Sweets (Mithai),Namkeen and Snacks Foodwith Formulae

* Mfr. of Snacks Food, Namkeen,Pappad & Potato Products

* Technology of Water andPackaged Drinking Water

PACKAGED DRINKING WATER

PRINTING & PACKAGING* Complete Hand Book on Packaging

Technology & Industries* Printing Processes Tech. & Indt.* Hand Book of Printing Technology

(Offset, Screen, Flexo, Gravure,Inkjet & Digital)

* Hand Book of Offset PrintingTechnology

* Screen Printing withProcesses & Technology

* Hand Book of Prepress* Hand Book of Packaging Indus* Modern Packaging Technology

for Processing Food, Bakery,Snack Foods, Spices andAllied Food Products

* Hand Book of Food PackagingTechnology

* Modern Tech. of Printing Inks* Hand Book of Packaging

Technoloy

* Paint Pigment Varnish &Lacquer Manufacturing

* Paint Varnish Solvents& Coating Technology

* Paint, Pigment, Solvent,Coating, Emulsion, PaintAdditives & Formulations

* Technology of Coatings, Resins,Pigments & Inks Industries

* Mfg. Tech. & Formulations H.B.on Thinners, Putty, Wall & Indu.Finishes & Synthetic Resins

* Technology of SyntheticResins & Emulsion Polymers

* Technology of Paints andCoatings with Formulations

* Powder Coating Technology

* Moulds Design & ProcessingHand Book

* Hand Book of Plastic Materials& Processing Technology

* Injection Moulding of Plastics* Plastic Processing &

Packaging Industries* Plastic Waste Recycling Tech.* Technology of Plastic Films* Rotational Moulding Technology

HandBook* Plastic Compounding, Master

Batches, PET & Other Plastics* Synthetic Resins Technology

with Formulations

* Technology of PVC Compounding& Its Applications

* Polymer & Plastic Technology* H.B. of Fibre Glass Moulding* Techn. of Reinforced Plastics* Plastic Additives Technology* Technology of PET Bottles,

Preform and PET Recycling* Modern Technology of

Extrusion & Extruded Products* Technology of Synthetic

Resins & Emulsion Polymers* Technology of Plastic Additives

with Processes and Packaging* Complete Technology Book On

Identification Of Plastics AndPlastic Products Materials(Additives, Applications,Biodegradation, Biomedical,Bulk Moulding Compound,Chemical Analysis, Xlpe, DripIrrigation, Expanded Polyethylene,Polystyrene & Hdpe)

* Identification Of Plastics AndOther Plastic Process Industries(Polystyrene, Nylon, ThermoplasticElastomer, Alkyd Resin,Polypropylene Plastics, MelamineFormaldehyde Resins, Abs, PlasticBlends, Polyvinylidene ChloridePlastics, Polymer, Pipes)

* Complete Technology BookOf Plastic Processing AndRecycling Of Plastics WithProject Profiles

* Modern Technology OfInjection Moulding, BlowMoulding, Plastic Extrusion,Pet And Other Plastics

* Technology of Biscuits, Rusks,Crackers & Cookies withFormulations (Wafer Biscuits,Cream Sandwich Biscuits, OatCereal Biscuits, Low SugarBiscuits, High Fibre Biscuits,Herbal Biscuits, Dog Biscuitsand other Biscuits)

* Hand Book of Confectionerywith Formulations

* Breakfast, Dietary Food, Pasta& Cereal Products Technology

* Hand Book of Modern BakeryProducts (2nd Edn.)

* Modern Bakery Technology &Fermented Cereal Productswith Formulae

* Technology of Confectionery,Chocolates, Toffee, Candy,Chewing & Bubble Gums,Lollipop and Jelly Productswith Formulations

* Hand Book of Bakery Industries

* Start Your Own Wheat Flour Mill (Atta, Maida, Suji, Bran & Besan)

PAINT, VARNISH, SOLVENTS,POWDER COATING & LACQUERS

PLASTIC/POLYMER PROCESSING,COMPOUNDING, INJECTION

MOULDING, ROTATIONALMOULDING, PLASTIC FILM, FIBRE

GLASS, PLASTIC WASTERECYCLING, MOULDS, PET &

RESINS, ADDITIVES INDUSTRIES

BAKERY, CONFECTIONERY,BISCUITS, COOKIES,

BREAKFAST, PASTA & CEREALS

FLOUR MILL (ATTA MAIDA, SUJI)

SMALL SCALE INDUSTRIES,STATIONERY, PAPER, INKS,

CANDLES & EXPORT BUSINESS

SWEETS, NAMKEEN & SNACK FOOD

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ Name of Books Rs. US$

* Poultry Farm & Feed Formulae* Hand Book of Pig Farming* Agro Based H.B. of Plantation,

Cultivation & Farming* Agro-Based Plantation

Cultivation & Farming* Agro Chemical Industries

(Insecticide & Pesticides)* Modern Bee Keeping & Honey

Processing* Technology of Modern Rice

Milling and Basmati Rice* Hand Book of Goat Farming* Floriculture Hand Book

(Flowers Growing Technology)* Aloe Vera Cultivation,

Processings, Formulations andManufacturing Technology

* Dairy Formulations, Processes &Milk Processing Industries

* Milk Processing and DairyProducts Industries

* Dairy Farming to Produce Milkwith Packaging

* Hand Book of Ice CreamTechnology and Formulae

* Hand Book of Milk Processing,Dairy Products and PackagingTechnology

* Dairy Farming for MilkProduction Technology

* Commercial Dairy Farmingwith Project Profiles

* Herbs, Medicinal & AromaticPlants Cultivation

* Aushidhi and SungndhitPaudho Ka Vaysayik (Hindi)

* Aromatic & Medicinal Plantsand Biodiesel (Jatropha)

* Hand Book of Medicinal &Aromatic Plants

* Fruits & Vegetable ProcessingHand Book (2nd Edn.)

* Fruit Beverage & Processingwith Mango

* Food Processing & AgroBased Industries (2nd Edn.)

* Preservation & Canning ofFruits and Vegetables

* Hand Book of FoodDehydration & Drying

* Meat Processing & MeatProducts Hand Book

N Name of Books Rs. US$

AGRO CULTIVATION, ANIMALFARMING, AGRO PLANTATION &AGRO CHEMICAL/PESTICIDES/

FLORICULTURE & BEE KEEPING

HERBS CULTIVATION/MEDICINES

FOOD & AGRO PROCESS, TOMATOPROCESSING, PRESERVATION,

DEHYDRATION, FRUIT BEVERAGE,POTATO, MAIZE, MEAT, BANANA

* Technology of FoodPreservation & Processing

* Food Packaging Technology* Agro Based & Processed

Food Products* Potato & Potato Processing

Technology* Technology of Maize

& Allied Corn Products* Technology of Food

Processing Industries* Complete Book on Banana

Cultivation, DehydrationRipening, Processing,Products & Packaging Tech

* Agro Food Processingand Packaging Technology

* Modern Tech. of TomatoProcessing & Dehydration(Ketchup, Juice, Paste, Soup& Drying)

* Technology of FoodChemicals, Pigments& Food Aroma Compd.

* Modern Technology of AgroProcessing & Food PackagingProducts with ProjectProfiles

* Technology of Chicken Meatand Poultry Products

* Poultry Farming, Hatchery &Broiler Production

* Poultry Farm & Feed Formulae

* Modern Technology of Wood,Veneer, Plywood, ParticleBoard, Fibreboard, Bamboo& Forest Products

* Household Soap,ToiletSoap & Other Soap

* Profitable Small Scale Mfr.of Soaps & Detergents

* Synthetic Detergents withFormulations (2nd Edn.)

* Modern Technology of AcidSlurry, Surfactants, Soap andDetergents with Formulae

* Complete Technology Book onDetergents with Formulations(Detergent Cake, DishwashingDetergents, Liquid &PasteDetergents, Enzyme Detergents,Cleaning Powder & SprayDried Washing Powder)

* Manufacture of WashingSoap, Toilet Soap, DetergentPowders, Liquid Soap & HerbalDetergents and Perfumes withFormulations

POULTRY FARM, HATCHERY &CHICKEN MEAT TECHNOLOGY

WOOD, PLYWOOD, PARTICLE,BOARD, BAMBOO & FOREST

SOAP, DETERGENT & ACID SLURRY

COSMETICS TECHNOLOGY(SYNTHETIC & HERBAL)

* Cosmetics Processes &Formulations Hand Book

* Herbal Cosmetics & BeautyProducts with Formulations

* Profitable Small ScaleManufacture of Cosmetics(Synthetic & Herbal)

* Hand Book of Synthetic &Herbal Cosmetics

* Technology of HerbalCosmetics & ToiletriesProducts with Formulae

* Hand Book of Oils, Fats andDerivatives with Refining &Packaging Technology

* Technology of OilseedsProcessing, Oils & Fatsand Refining

* Essential Oils Manufacturing& Aromatic Plants

* Modern Technology ofEssential Oils

* Technology of Perfumes,Flavours & Essential Oils

* Essential Oils Processes& Formulations

* Hand Book of Flavours &Food Colourants Technology

* H. B. of Perfumes & Flavours* Hand Book of Perfumes

with Formulations (2nd Edn.)* Technology of Perfumes,

Flavours & Essential Oils* H.B. of Flavours Technology

* Technology Of Solar Pv Panels,Energy, Cells, Lantern, Cooler,Light System, Cfl Inverter,Photovoltaic System, PowerPlant, Water Heater, Collector,Solar Cooling, Refrigeration,Solar Drying, Tractor, HomeSystem, Dish Engine,Nanotechnology & Other SolarProducts Manufacturing

* Technology of Building Materials& Chemicals with Processes

* Mod. Tech. of Bleaching, Dyeing,Printing & Finishing of Textiles

* Technology of Textiles (Spinning& Weaving, Dyeing, Scouring,Drying, Printing and Bleaching)

* Garments Manufacturing Tech.

* H.B.of Pulp & Paper, PaperBoard & Paper Based Tech.

OILSEEDS AND FATS

ESSENTIAL OILS & AROMATIC

PERFUMES AND FLAVOURS

SOLAR PV PANELS, ENERGY

BUILDING MATERIAL & CHEMICALS

TEXTILE, GARMENTS, DYEING...

DAIRY FARM, MILK PROCESSINGAND ICE CREAM

PULP & PAPER TECHNOLOGY

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ N Name of Books Rs. US$

* Technology of Spices andSeasoning of Spices withFormulae

* Spices &Packaging with Formula* Start Your Own Cold Storage Unit

* Complete Tech. of NonwovensFabrics, CarryBags, Composite,Geotextiles, Medical Textiles,Fibres, Felts, Apparels, Spunlaceand Absorbent Nonwoven

* Pharmaceuticals and DrugsTechnology withFormulations

* Hand Book of Leather &Leather Products Technology

* Hand Book of Biotechnology

* H.B.of Ceramics & CeramicsProcessing Technology

* Hand Book of Tree Farming

* Hand Book of MushroomCultivation, Processing& Packaging

* Biofertilizers & Vermiculture

* Modern Technology ofBiodegradable Plastics andPolymers With Processes(Bio-Plastic, Starch Plastics,Cellulose Polymers & others)

* Production of BiodegradablePlastics and BioplasticsTechnology

* Complete Hand Book onFrozen Food Processing& Freeze Drying Technology

* Modern Technology ofFrozen Food Products

* Hand Book of Minerals andMinerals Based Industries

* Hand Book of Organic Farmingand Organic Foods with Vermi-Composting & Neem Product

* Hand Book of Fish Farmingand Fishery Products

* Textile Auxiliaries andChemicals with Processes& Formulations

* Technology of TextileChemicals withFormulations

* Modern Technology of TextileAuxiliary and chemicalswith formulations

* Textile Processing Chemicals,Enzymes, Dye Fixing Agentsand Other Finishes withProject Profiles

* Manufacture of Disinfectants,Cleaners, Phenly, Repellents,Deodorants, DishwashingDetergents & Aerosols withFormulations

* Start Your Own Coffee &Coffee Processing

* Complete Book on OnionCultivation, Dehydration,Flakes, Powder, Processingand Packaging Technology

N Name of Books Rs. US$

Send Draft in favour of "Engineers India Research Institute" (Postage Rs. 100/- Extra)

NON WOVEN TECHNOLOGY

SPICES, SEASONING& COLD STORAGE

PHARMACEUTICALS & DRUGS

LEATHER &LEATHER PRODUCTS

BIOTECHNOLOGY

CERAMICS & CERAMIC PROCESS

TREE FARMING

MUSHROOM PROCESSING

BIOFERTILIZERS & VERMICULTURE

BIODEGRADABLE PLASTICSAND POLYMERS

FROZEN FOODAND FREEZE DRYING

RUBBER CHEMICALS, COMPOUNDS& RUBBER INDUSTRIES

AYURVEDIC MEDICINES

* Rubber Chemicals &Processing Industries

* Modern Rubber Chemicals,Compounds & RubberGoods Technology

* Technology of Rubber &Rubber Goods Industries

* Ayurvedic & HerbalMedicines with Formulaes

* Hand Book of AyurvedicMedicines with Formulations

* Modern Technology of NonFerrous Metals and MetalExtraction

* Processing Technology ofSteels and Stainless Steels

* Modern Technology ofRolling Mill, Billets, SteelWire, Galvanized Sheet,Forging & Castings

* Manufacturing Technology ofNon-Ferrous Metal Products

* Modern Technology of FoodAdditives, Sweeteners andFood Emulsifiers

* Technology of FoodChemicals, Pigments andFood Aroma Compounds

* Technology of DisposableMedical Products

* Technology of Soya Milk, Tofu,Hydrolyzate, Allied SoyabeanProducts with project Profiles

* Technology of SOYBEANProducts with Formulae

* Technology of Products fromWastes (Industrial, Agriculture,Medical, Municipality, Organic& Biological) By Panda

* Products from WasteTechnology Hand Book

* Technology of WineProduction and Packaging

* Casting Technology H.Book

STAINLESS STEEL, NON FERROUSMETALS, BILLETS & ROLLING MILL

FOOD ADDITIVES/CHEMICALS ANDSWEETENERS & FOOD EMULSIFIERS

DISPOSABLE MEDICAL PRODUCTS

SOYA MILK, TOFU & SOY PRODUCTS

PRODUCTS FROM WASTE

WINE PRODUCTION

ORGANIC FARMING & FOOD/NEEM

FISH FARMING & FISHERY PRODUCTS

TEXTILE AUXILIARY & CHEMICALS

DISINFECTANTS, CLEANERS,PHENYL, DEODORANTS,

DISHWASHING DETERGENTS ETC.

COFFEE & COFFEE PROCESSING

CASTING TECHNOLOGY

ONION CULTIVATION,DEHYDRATION, POWDER

PROCESSING & PACKAGING

MINERAL AND MINERALS

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)

* Ph: +91 9811437895, 9811151047,91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : eiriprojects@gmail.com,

eiritechnology@gmail.com* Website: www.eiriindia.org,

www.industrialprojects.inDeposit the amount in “EIRI

“Account with HDFC BANK -05532020001279 (RTGS/NEFT/

IFSC CODE: HDFC0001981) ORICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE:

ICIC0000387)