1 End-User Release Notes Product: T-200/T-200+ Version: 2.00 Date: 10/17/03 The following revisions have been made to the ENCAD T-200+ firmware to enhance performance and address problems reported from the field. Note: A new boot ROM code, t200boot354.rom, must be downloaded to the printer before downloading this version of firmware. 1. When using the Print Cart Info command to for warranty cartridge claims, the resulting print now has fill in lines to provide additional information to technical support. 2. Spitting interval can only be changed for pigment ink cartridges. The menu display in the Ink Options menu was changed from Interval = to Pigm.Spit =. 3. Black Pigment and Black Dye are differentiated in Display Cartridge Info and Print Cartridge Info as K-Pigm and K-Dye. 4. Reduced spitting intervals for dye ink. 5. When manually compensating for jets, the jet counter does not return to Jet 1, but stays on the last jet that was altered. 6. Added a new menu selection to display On time hours and Plot time hours. Utility Menu/Display Setting/(On or Plot) 7. When printing the Prime and open jet compensation values, the open jet compensation value now displays the T-200 quality mode instead of number of passes.

End-User Release Notes | encad T-200/T-200+

Download PDF Report

Upload
smart-refill
View
18
Download
0

Embed Size (px)

DESCRIPTION

End-User Release Notes | encad T-200/T-200+ | The following revisions have been made to the ENCAD T-200+ firmware to enhance performance and address problems reported from the field. | Note: A new boot ROM code, t200boot354.rom, must be downloaded to the printer before downloading this version of firmware.

Citation preview

Page 1: End-User Release Notes | encad T-200/T-200+

End-User Release Notes Product: T-200/T-200+ Version: 2.00 Date: 10/17/03

The following revisions have been made to the ENCAD T-200+ firmware to enhance performance and address problems reported from the field. Note: A new boot ROM code, t200boot354.rom, must be downloaded to the printer before downloading this version of firmware.

1. When using the Print Cart Info command to for warranty cartridge claims, the resulting print now has fill in lines to provide additional information to technical support.

2. Spitting interval can only be changed for pigment ink cartridges. The menu display in the Ink Options menu was changed from Interval = to Pigm.Spit =.

3. Black Pigment and Black Dye are differentiated in Display Cartridge Info and Print Cartridge Info as K-Pigm and K-Dye.

4. Reduced spitting intervals for dye ink.

5. When manually compensating for jets, the jet counter does not return to Jet 1, but stays on the last jet that was altered.

6. Added a new menu selection to display On time hours and Plot time hours. Utility Menu/Display Setting/(On or Plot)

7. When printing the Prime and open jet compensation values, the open jet compensation value now displays the T-200 quality mode instead of number of passes.

Page 2: End-User Release Notes | encad T-200/T-200+

8. Added a new color mode, Four Black Grayscale, to the Color Mode menu. The available selections are now Color, 4BGray (Four Black Grayscale), 4BMono (Four Black Mono), 1BGray (One Black Grayscale) and 1BMono (One Black Mono).

9. Initialized ink and media counting when resetting the clock.