8/17/2019 Enatel Login

1/4

8/17/2019 Enatel Login

2/4

8/17/2019 Enatel Login

3/4

If Scan port does not find the USB port you may have to go into Control Panel\ System\ Hardware Device manager \ USB port and

load the USB driver located in the Program file\ Enatel\sm3xconfiguratio\drivers folder.

Once USB is connected click start scanning on the monitor page and you should see the system voltage and currents. Providedthe Enatel system is powered up !!! 

8/17/2019 Enatel Login

4/4