Upload
rodrigo-neira-de-fino
View
213
Download
0
Embed Size (px)
Citation preview
7/22/2019 EN-RF-NK
1/25
RFRFRFRF----NKNKNKNK7.07.07.07.0
Management System of Issuing CardManagement System of Issuing CardManagement System of Issuing CardManagement System of Issuing Card
for Door Lock of Intelligent Cardfor Door Lock of Intelligent Cardfor Door Lock of Intelligent Cardfor Door Lock of Intelligent Card
Part One: SummaryPart One: SummaryPart One: SummaryPart One: Summary1. Configuration of System1. Configuration of System1. Configuration of System1. Configuration of System
Pentium Series Processor
128M Internal Memory
Win2000 /XP Operating System
At least one com port
2. Installation of System2. Installation of System2. Installation of System2. Installation of System
1) Connect encoder to computer.
The wire connect encoder and computer has three connecting.single connecting side connect
encoder,another side of wire has two connecting,one connect Comport,another connect USB .
2) Install system: Insert optical disk to run document setup. exe, complet installation process
based on prompt.
3.enter into system3.enter into system3.enter into system3.enter into system When first running the system ,the default user is supersupersupersuper and password is0000 ,
this is super-management authority. (**For security, it should add new super-managers and
delete this default super user**).
Part Two :OperationPart Two :OperationPart Two :OperationPart Two :OperationThereThereThereThere areareareare seven function menuseven function menuseven function menuseven function menus on the surface of softwares on the surface of softwares on the surface of softwares on the surface of software,they,they,they,they areareareare
CheckCheckCheckCheck----in,Tools,Cardin,Tools,Cardin,Tools,Cardin,Tools,Cardprprprprocesocesocesocesssss,Reports,Systemsetting,Control,Reports,Systemsetting,Control,Reports,Systemsetting,Control,Reports,Systemsetting,ControlPanel.About.Panel.About.Panel.About.Panel.About.
Please operate software by below steps.Please operate software by below steps.Please operate software by below steps.Please operate software by below steps.
1111 System settingSystem settingSystem settingSystem setting
This is the first step to perform the software .Set the hotels data according to the actual condition
of hotel.After system data setting ,hotel s room information will be shown on the interface of
software.System Data setting includs Room Seting .ClearRoom Seting .ClearRoom Seting .ClearRoom Seting .Clear----roomroomroomrooms setting ,system datas setting ,system datas setting ,system datas setting ,system data andandandand
backup databasebackup databasebackup databasebackup database
1111----1111 RRRRoom settingoom settingoom settingoom setting
FunctionFunctionFunctionFunction
Set hotel room information
2222OperationOperationOperationOperation rulesrulesrulesrules
With mouse click the submenu "room setting""room setting""room setting""room setting" in "system settingsystem settingsystem settingsystem setting" menu to enter into the
following screen
7/22/2019 EN-RF-NK
2/25
Generally ,guest room number is consisted by building number,floor number and floor room
number.For example: If a hotel has 1 building 9 floors , 20 rooms in each floor. set room
information like below.
1.choose building dispaybuilding dispaybuilding dispaybuilding dispay and fix lengthfix lengthfix lengthfix length.input number 1111 in blank pane. choose foor dispayfoor dispayfoor dispayfoor dispay ,input
digital 1111 in blank pane ( if floors exceed 10 ,input number 2) .choose the room displayroom displayroom displayroom display and fixfixfixfix
lengthlengthlengthlength and input number 2222 in the blank pane.(because the room number is 20.exceed 10 ).
2 Input 1-1 in the building bound . input 1-9 to the floor bound ,it means there are 9 floors , from
floor 1 to floor 9.input 01-20 to the room bound ,means there 20 rooms in each floor,from 01 to
20.
3. the default room type is luxury suit ,if the hotel need to add other type rooms , click AAAAdddddddd roomroomroomroom
typetypetypetype and input the new room type
Finally ,choose ADDADDADDADD and close screen ,the rooms will be shown on the interface.the rooms
number is from 1101 to 1920.
If hotel would not like show the building number on the interface ,cancel the choice of
building dispaybuilding dispaybuilding dispaybuilding dispay .the room number will show on the surface from 101-920 .
if the hotel would not like setting room contain numbers like 04,14,07,17 , please tick in the
front of X4,X7.
5.Delete: select the room number in the list box above, and click deletedeletedeletedelete tab. If Delete all rooms,
please click on deletedeletedeletedelete tab and keep pressing on the enterenterenterenter tab until all the rooms are deleted.
1111----2222 CleanCleanCleanClean ----roomsroomsroomsrooms settingsettingsettingsetting
FunctionFunctionFunctionFunction
The clean staff need to clean rooms every morning ,so hotel need to set some clean
rooms.Hotel clean staff hold clean cards so that they can get into the corresponding clean
-rooms.
7/22/2019 EN-RF-NK
3/25
2222OperationOperationOperationOperationrulesrulesrulesrules
With mouse click the submenu """"cleancleancleanclean ----roomsroomsroomsrooms settingsettingsettingsetting" in "system setting"system setting"system setting"system setting menu to enter into the
following screen, add clean rooms number and bound of each clean- rooms.For example ,one
hotel has rooms from 1101-1920.and want to set 4 clean- rooms.
1.Input sequence number 01 in the first CleanCleanCleanClean roomsroomsroomsrooms pane .if the bound of NO 01 clean01 clean01 clean01 clean roomsroomsroomsrooms is
from room 1101 to room 1220 ,input 1101-1220 in the bound pane.Then click AddAddAddAdd with mouse
input 02 in the clean roomsclean roomsclean roomsclean rooms Pane . if No 2No 2No 2No 2 cccclean roomslean roomslean roomslean rooms is from room 1301-1420 ,input 1301-1420
in the bound pane.
Analogy like this.the NO 03 clean rooms is from 1501-1620.the NO .04 clean rooms is
1701-1920.
2.Delete clean room: choose clean -rooms ,then click delete tab.
1111----3333 System data settingSystem data settingSystem data settingSystem data setting
1.System data contains check out time ,Max cards for one room .com port NO and total room of
each row.
check-out time means if customer want to check out ,the have to check-out before this time .
Max card for one room means guest card most can be issued for one room .
Comport number here means which port on computer connect encoder .The encoder defaout port
number is Com port 1.
Total rooms of each low means room most can be shown on interface of software.
2222OperationOperationOperationOperation rulesrulesrulesrules
With mouse click the submenu "system data"system data"system data"system data" in"system settingsystem settingsystem settingsystem setting"memu to enter into the following
screen;
It can amend the amount of the issued card, guest card, and the time of guest checking-out .
7/22/2019 EN-RF-NK
4/25
backup databasebackup databasebackup databasebackup database
1111FunctionFunctionFunctionFunction
In order to prevent system data loss ,hotel should backup system data every day.If the data
lossed .the hotel can use the backuped data and authorization card recover former system data.
2222 Control PanelControl PanelControl PanelControl Panel
2222----1111 operator controlsoperator controlsoperator controlsoperator controls
1111FunctionFunctionFunctionFunction
Add, delete the super manager .manager and receptionist .for security ,the hotel had better add
new super manager and delete the default super manager.
2222OperationOperationOperationOperation rulesrulesrulesrules
Click the submenu operator controlsoperator controlsoperator controlsoperator controls in the super manager menusuper manager menusuper manager menusuper manager menu.input the information and choose
operator.there are three grade operator popedom.super managersuper managersuper managersuper manager .managermanagermanagermanager and receptionist.receptionist.receptionist.receptionist.*
1.SuperSuperSuperSuper----managermanagermanagermanager: Can operate all functions of the system.
2.ManagerManagerManagerManager: Can issue various cards (except for authorization card and master control card),
check unlocking records and so on;
3.ReceReceReceReceptionistptionistptionistptionist: it is limited to only issue guest card, check work records, change password
*Delete operator:choose the operator want to be deleted, click deletedeletedeletedelete tab
7/22/2019 EN-RF-NK
5/25
3333attentionattentionattentionattention
The code of certain operator cannot be repeated . Its better to set only one super manager.
2222----2222.... Recover authorization dataRecover authorization dataRecover authorization dataRecover authorization data
1111FunctionFunctionFunctionFunction
Recover system data when system data losed.
2222OperationOperationOperationOperationrulesrulesrulesrules
With mouse click the submenu"recover authorizrecover authorizrecover authorizrecover authorization dataation dataation dataation data" in """"Control PanelControl PanelControl PanelControl Panel"menu,Put
authorization card on encoder, then Press yesyesyesyes tab. System will be recovered
3333AttentionAttentionAttentionAttention
Please do this step carefully
The whole step of recoving system data is below.
7/22/2019 EN-RF-NK
6/25
1,install new software .
2.put the authorization card on encoder then click OK,OK,OK,OK,the former database will be recovered.
3333 CCCCard processard processard processard process
3333----1 Cards instruction1 Cards instruction1 Cards instruction1 Cards instructionThere are two types cards:setting cards and function cards.all the cards issued by encoder.If the
cards issued successfully ,there would be have a long buzz from encoder
Setting cards:set different function in locks.
Function cards:Unlock lock.
SSSSetting cardsetting cardsetting cardsetting cards
1....AuthorizationAuthorizationAuthorizationAuthorization cardcardcardcard:
Function: Write system information in lock.
Store system data
Recover system authorization if the system data lost
The super manager had better hold at least 3 pcs authorization cards.
2.CCCClock cardlock cardlock cardlock card
Function: Set and revise time in locks.
3.RRRRoom setting cardoom setting cardoom setting cardoom setting card
Function:Write hotel room numberhotel room numberhotel room numberhotel room number or cleancleancleanclean----roomsroomsroomsrooms numbernumbernumbernumber in locks.
For example:one lock has installed on the 1101 guest room ,the hotel should issue a roomroomroomroom
setting cardsetting cardsetting cardsetting card 1101 and induct this card on the lock ,the information of 1101room number would be
imputed in lock.
AAAAttentionttentionttentionttention :gggguest room carduest room carduest room carduest room card is different to roomroomroomroom setting cardsetting cardsetting cardsetting card .guest room cardguest room cardguest room cardguest room card is used to open the
door. room setting cardroom setting cardroom setting cardroom setting card is used to write room nformation in lock.
The AuthorizAuthorizAuthorizAuthorization card ,Clock card ,Room setting cardation card ,Clock card ,Room setting cardation card ,Clock card ,Room setting cardation card ,Clock card ,Room setting card are basic setting cards ,all new locks after
installation on door must be set by this three cards first.
4.sealsealsealseal cardcardcardcard:
seal the unused rooms.
5.stop cardstop cardstop cardstop card:
stop the function of guest room card
6.checkcheckcheckcheck----out cardout cardout cardout card:
stop function of guest room card when guest check out ahead of schedule or the guest room cardguest room cardguest room cardguest room card
lost.
7....normalnormalnormalnormal openopenopenopen cardcardcardcard:
Set lock in the long unlocking state.
8.Alarm cardAlarm cardAlarm cardAlarm card:
set alarm funtion
when lock in the condition of false locking and uncompleted locking.
9.DonDonDonDont interruptt interruptt interruptt interrupt cardcardcardcard
set dont interrupt function in the condition of deadbolt
Function cardsFunction cardsFunction cardsFunction cards
7/22/2019 EN-RF-NK
7/25
1. Master cardMaster cardMaster cardMaster card:Can open all the doors ,dont limited by deadbolt ,time.Usually .General managerhold this card.
2. EEEEmergency cardmergency cardmergency cardmergency card:open door in emergency condition and keep lock on long-unlockingstate.Usually Manager hold this card
3. BBBBuilding carduilding carduilding carduilding card:Can open all doors in a certain building ,but limited by deadbolt andtime.Usually,Manager hold this card.
4. FFFFloor cardloor cardloor cardloor card:Can open all doors in a certain floor ,limited by deadbolt and time. Usually ,Foremen hold this cards.
5. MultiMultiMultiMulti roomroomroomroom cardcardcardcard:can open all the doors in a certain clean -rooms.Usually,Clean staff hold thiscard.
6 Guest room cardGuest room cardGuest room cardGuest room card:open the certain guest room.guest hold this card.AttentionAttentionAttentionAttention :The below is the procedureThe below is the procedureThe below is the procedureThe below is the procedure to set lock.to set lock.to set lock.to set lock.
set lock by setting cards first,then unlock locks by function card.set lock by setting cards first,then unlock locks by function card.set lock by setting cards first,then unlock locks by function card.set lock by setting cards first,then unlock locks by function card.
For example :One lock installed on the room 1101.the follow steps to set and use the lock.
1.Issue three basic setting cards :authorization cardauthorization cardauthorization cardauthorization card ,clock cardclock cardclock cardclock card and roomroomroomroom settingsettingsettingsetting cardcardcardcard.
the time in clock cardclock cardclock cardclock card had better 15-30 minuters after the current time. (because if the time in
the lock in incorrect,many card cannt unlock the lock).
the number of room settingroom settingroom settingroom setting cardcardcardcard is 1101.
1. Induct these three cards on the lock.(First induct authorization card,then induct clock cardor room setting card.there will be a short buzz from the lock if the operation successful)
2. Issue guest room card 1101.Thus,room 1101can be opened by the guest room cardguest room cardguest room cardguest room card 1101.this is the basic process of use the
lock in the hotel rooms.
And this room also can be opened by the master cardmaster cardmaster cardmaster card ,emergency cardemergency cardemergency cardemergency card, foor card andfoor card andfoor card andfoor card and buildingbuildingbuildingbuilding
cardcardcardcard .
If hotel had set clean rooms,the room also can be opened by clean cardclean cardclean cardclean card.
If hotel want to set more function on the lock ,use the corresponding setting cardsetting cardsetting cardsetting card to set.
3333----2 issue cards2 issue cards2 issue cards2 issue cards
Authorization cardAuthorization cardAuthorization cardAuthorization card
OperationOperationOperationOperation rulesrulesrulesrules
a.a.a.a.With mouse click the submenu "issue cards"issue cards"issue cards"issue cards" in the menu of "card processcard processcard processcard process", select AuthorizationAuthorizationAuthorizationAuthorization
cardcardcardcard to enter into the following screen, input the name, ID card No., remark, then click yesyesyesyes tab,
please confirm whether the card issued successful according to the Status Bar at the bottom of
screen.
b,Usage: After the installation of the lock, induct the card, the beeper will give out a short
beep,that means authorization successfully, induct this card again ,can empty the authorization.
7/22/2019 EN-RF-NK
8/25
7/22/2019 EN-RF-NK
9/25
Clock cardClock cardClock cardClock card
OperationOperationOperationOperation rulesrulesrulesrules
a: Issue cards: With mouse click the "issue card"issue card"issue card"issue card" in the menu of "card process","card process","card process","card process", select clock cardclock cardclock cardclock card
to enter into the following screen, input correct time(the correnct time is about 15-30minutes
after currenct time)in the blank . click yesyesyesyes tab, please confirm whether the card issued
successfully according to the Status Bar at the bottom of the screen.
b. Usage: induct the clock card after authorization.
3333AttentionAttentionAttentionAttention
Time should be inputted by format. For example:
2007-06-27 09:19:20
Please consider the interval between current time and the time to set lock( .generally ,the time
imputed in the lock is 15-30 minutes later then current time)
Master cardMaster cardMaster cardMaster card
OperationOperationOperationOperation rulesrulesrulesrules
With mouse click the submenune issue cardsissue cardsissue cardsissue cards in "ccccard procesard procesard procesard processsss"""" menu select the master cardmaster cardmaster cardmaster card to
enter into the following screen, input the name, code No. remark info according to the needs, click
yesyesyesyes tab., please confirm if the card issued successfully according the bottom of the screen
7/22/2019 EN-RF-NK
10/25
7/22/2019 EN-RF-NK
11/25
code No. remark information according to the requirement, click yesyesyesyes tab.
Seal cardSeal cardSeal cardSeal card
OperationOperationOperationOperationrulesrulesrulesrules
a. Issue cards: With mouse click the issue cards"issue cards"issue cards"issue cards" menu of "card process"card process"card process"card process", select the seal cardseal cardseal cardseal card to
enter into the following screen, input the name, ID card, remark, click yesyesyesyes tab, please confirm
whether the card isssued successfully according to the Status Bar at the bottom of screen.
b. Usage: induct the seal card first time, the beeper will have a short beep, at that time; all the
cards cant open the door except emergency card. Induct the seal card again, cancel the seal
condition with a long buzz
7/22/2019 EN-RF-NK
12/25
Stop cardStop cardStop cardStop card
OperationOperationOperationOperationrulesrulesrulesrules
a. Issue cards: With mouse click the" issue cardissue cardissue cardissue card" in the menu of "card process"card process"card process"card process", select stop cardstop cardstop cardstop card
to enter into the following screen. Input the name, ID card, remark, press yesyesyesyes tab, please confirm
whether the card issued successfully according to the Status Bar at the bottom of screen.
b.b.b.b. UsUsUsUsageageageage: induct stop card first time, the beeper will havea short beep, at that time, all the valid
guest card of this lock issued before cant open the door, induct the stop card again, a long buzz,
cancel stop cardstop cardstop cardstop card function,all the valid the card can unlock the lock.pls attention input the valid
time in stop card.
7/22/2019 EN-RF-NK
13/25
CheckCheckCheckCheck----out cardout cardout cardout card
OperationOperationOperationOperation rulesrulesrulesrules
a. Issue cards: With mouse click the "issue card"issue card"issue card"issue card" in menu of "card process""card process""card process""card process", select the checkcheckcheckcheck----outoutoutout
cardcardcardcard to enter into the following screen, input the name, ID card, remark, click yesyesyesyes tab, and please
confirm whether the card issued successful according to the Status Bar on the bottom of screen.
bUsage: The beeper will sound a short beep when induct the check-out card the first time. After
induct the check-out card , all the the valid guest cards of this room issued before lost
function .On this condition,the lock have to been unlocked by new guest card.
7/22/2019 EN-RF-NK
14/25
NormalNormalNormalNormal openopenopenopen cardscardscardscards
2222OperationOperationOperationOperationrulesrulesrulesrules
a. Issue cards: With mouse click the "issue card"issue card"issue card"issue card" in the menu of "card process""card process""card process""card process", select longlonglonglong
unlockingunlockingunlockingunlocking cardcardcardcard tttto enter into the following screen. input the name, ID card, remark, press yesyesyesyes tab,
and please confirm whether the cards issued successfully according to the Status Bar at the
bottom of screen.
b. Usage: After induct the NormalNormalNormalNormal----openopenopenopen cardcardcardcard,,,, induct any of function card , lock will be in
long-unlocking status. induct any of valid card again, lock would be recovered in the long
locking status. Induct Normal-open card again can cancel long locking status.
Emergency cardEmergency cardEmergency cardEmergency card
OperationOperationOperationOperationrulesrulesrulesrules
a: Issue cards: With mouse click the "issue card""issue card""issue card""issue card" in the menu of "card process","card process","card process","card process", select
7/22/2019 EN-RF-NK
15/25
emergency cardemergency cardemergency cardemergency card to enter into the following screen, input the name, ID card, remark, press yesyesyesyes tab,
and please confirm whether the card issued successfully according to the Status Bar at the bottom
of screen.
b. Usage:after unlocked by emergency cardemergency cardemergency cardemergency card ,,,,there will be alarm with continuous short buzzer, and
lock keep long-locking status. Lock can be recovered to former status after induct EmEmEmEmergencyergencyergencyergency
cardcardcardcard again
)
multimultimultimulti---- roomsroomsroomsrooms CardCardCardCard
OperationOperationOperationOperationrulesrulesrulesrules
With mouse click the "issue card"issue card"issue card"issue card" in the menu of "card process"card process"card process"card process", select the multimultimultimulti----roomroomroomroom cardcardcardcard to
enter into the following screen, input area numbers (01, 02,...) , valid time, holders information
and so on.then click YESYESYESYES tab
7/22/2019 EN-RF-NK
16/25
3333AttentionAttentionAttentionAttention
If the hotel would like to the multimultimultimulti----roomroomroomroom cardcardcardcard limit by time table and time schedule. Please Tick a
in the corresponding time table and time schedule pane.
AlarmAlarmAlarmAlarm cardcardcardcard
OperationOperationOperationOperation rulesrulesrulesrules
a. Issue card: With mouse clickthe "issue cardissue cardissue cardissue card" in the menu of "card process""card process""card process""card process", select alarmalarmalarmalarm cardcardcardcard
to enter into the following screen, input holders information .click yesyesyesyes tab, please confirm
whether the card issued successfully according to the Status Bar at the bottom of screen.
b. Usage:The beeper will sound a short beep when the first time induct alarm cardalarm cardalarm cardalarm card.... The alarm
would stop until the latch in the postion of restoration. Induct alarmalarmalarmalarm cardcardcardcard again cancel the alarm
function with a long buzz
7/22/2019 EN-RF-NK
17/25
7/22/2019 EN-RF-NK
18/25
7/22/2019 EN-RF-NK
19/25
3333----3333ReadReadReadRead cardscardscardscards
1111FunctionFunctionFunctionFunction
All the cards issued by this system can be read on this menu.
2222OperatioOperatioOperatioOperationnnnrulesrulesrulesrules
With mouse click the "read cards"read cards"read cards"read cards" in the menu of "card process""card process""card process""card process" to enter into the following screen,
put card on encoder ,the information of the card will be shown on the screen.
3333----4444 Handset guidanceHandset guidanceHandset guidanceHandset guidance cardcardcardcard
1111FunctionFunctionFunctionFunction
Assist the handset to collect the unlocking records
7/22/2019 EN-RF-NK
20/25
2222OperationOperationOperationOperationrulesrulesrulesrules
With left mouse choose the certain room,then click the submenu Handset Guidance CardHandset Guidance CardHandset Guidance CardHandset Guidance Card in the
menu of "card processcard processcard processcard process"""", put the card on the inductorium of encoder, Then click "yesyesyesyes"""" tab .
3333----5555 Revise the room statusRevise the room statusRevise the room statusRevise the room status
If the quantity of actual valid cards of a certain room dont accord with that shown on the room
status screen ,adjust the quantity of cards on room status screen.
2222OperationOperationOperationOperation rulesrulesrulesrules
Click a cartain room, choose the submenu Revise of the room statusRevise of the room statusRevise of the room statusRevise of the room status in menu of "Card processCard processCard processCard process",",",",
confirm the quantity of cards of a certain room according to the informatin on the screen. Then
click the button of CancelCancelCancelCancel ".".".".
3333AttAttAttAtt
7/22/2019 EN-RF-NK
21/25
attattattattentionentionentionention
Confirm the actual quantity of valid cards before adjust,otherwise,the actual quantity of valid
cards would not accord with the cards quantity on the room status screen.
3333----6666 DataDataDataData TidyTidyTidyTidy
Function
Tidy issue records
Input the data of issue card,click Data TidyData TidyData TidyData Tidy to delete the record of cancelling current
record.
4.4.4.4.ReportsReportsReportsReports
4444----1111System operatiSystem operatiSystem operatiSystem operating recordsng recordsng recordsng records
Function
Check the operation records .This function only can be operated by super manager and manager
2222OperationOperationOperationOperationrulesrulesrulesrules
Click on system operating recordssystem operating recordssystem operating recordssystem operating records in the menu of seachseachseachseach datadatadatadata, all the operation records will be
displayed on the screen.
4444----2222 Show card logShow card logShow card logShow card log
Function
Check card records
7/22/2019 EN-RF-NK
22/25
2222OperationOperationOperationOperation rulesrulesrulesrules
With mouse click the Show card logShow card logShow card logShow card log in the menu of reportsreportsreportsreports, all the cards records will be
shown
5555 guest cardguest cardguest cardguest card
5555----1111 Room displayRoom displayRoom displayRoom display
1111FunctionFunctionFunctionFunction
Display seven types of room: empty room, occupied room, room-reserve, self-use room, repair
room. Closd room, dirtyroom.
2222OperationOperationOperationOperation rulesrulesrulesrules
Select a certain room with the left mouse, and then click the right mouse, there would be shown
room status. Click any of the types of room status can change the room status.
Room status of empty room and occupied room update automatically after issuing guest cards.
The amount of occupied rooms total rooms, cards quantity and the current operator can be
shown at the bottom of the software interface.
7/22/2019 EN-RF-NK
23/25
5555----2222 Read guest cardRead guest cardRead guest cardRead guest card
1111FunctionFunctionFunctionFunction
Read information in guest card. including check-in time, guest room number, guest's name,
operater issued time and so on.
2222OperationOperationOperationOperationrulesrulesrulesrules
As following screen, putting card on encoder can show the information of this guest card.
3333AttentionAttentionAttentionAttention
It is only uesd to read guest card
5555----3333 CancelCancelCancelCancel guest cardguest cardguest cardguest card
1Function
After guest check out , cancel guest card of that room
2Operationrules
As following screen, induct the guest card, click deletedeletedeletedelete tab to cancel the guest card.
3Attention
This function only can cancel guest card.
6.6.6.6.ToolToolToolTool
6666----1111 Event logEvent logEvent logEvent log
1111FunctionFunctionFunctionFunction
Check the operating records of the current operators
2222OperationOperationOperationOperation rulesrulesrulesrules
With mouse click submenu Event logEvent logEvent logEvent log" in the menu of "tool","tool","tool","tool", Including the records of issuing
guest cards cancelling guest cards .
7/22/2019 EN-RF-NK
24/25
3333AttentionAttentionAttentionAttention
Only display the work records of current operators.
6666----2222 Change operatorChange operatorChange operatorChange operator
1111FunctionFunctionFunctionFunction
Change operate
2222OperationOperationOperationOperationrulesrulesrulesrules
With mouse click submenu "shift"shift"shift"shift" in menu of "tool"tool"tool"tool", Input the suer Name and password of the
new operator, Cicki """"yesyesyesyes".".".".
6666----3333 System lockSystem lockSystem lockSystem lock
1111FunctionFunctionFunctionFunction
Password protection
2222OperationOperationOperationOperationrulesrulesrulesrules
With mouse click the submenu "System lockSystem lockSystem lockSystem lock" in the menu of "tool",tool",tool",tool", to enter into the following
screen. Its only can enter into the system by inputting the password of the current operator,
otherwise, the system needs to re-enter into
6666----4444 Change passwordChange passwordChange passwordChange password
1111FunctionFunctionFunctionFunction
Change password.
7/22/2019 EN-RF-NK
25/25
Remark:Remark:Remark:Remark:
1. If card lose during the period of validity, please issue the same type of this card with lose,lose,lose,lose,and
induct all the locks that can be unlocked by this card .after athat , the losed valid card will lose
function
2. Please backup the system data regularly to prevent data damage or lose . If data damaged ,can
use the backuped data recover former system data.
3. With the changing of market trend and the improvement of technology, our products are
upgraded ceaselessly. If our operating manual fails to match this kind of trend, please contact us
for more technical support.