EMAIL TIPS A Learning Publication from Full Spectrum Diagnostics Vol. 83 April 2012

83

The Destructive Power of Electro-Erosion

Diagnostic Testing Can Provide the Answers

EMAIL TIPS Volume 83 April 2012 Far and Away

Some new tools are in play with the use of the new Issuu.com publication format. The Full Spectrum Diagnostics distribution for Email Tips is nearly 3,900 strong. With only indirect knowledge of recipients and sharing the reach of this publication was only a guess. Until now.

The statistics capability in the new file sharing platform now provides a world-wide view of the Email Tips “traffic”.

The February & March issues reached across the globe with over 700 individual readers.

Dan Ambre [ModalGuy@aol.com], (763) 577-9959 www.fullspec.net

This Month’s Features:

The Time Waveform – The Shape of the TWF dictates the Frequency Content in the FFT

The Frequency Spectrum – Fluting, or Electro-Erosion in Rolling Element Bearings

Diagnostic Testing : Tips for exploring the “next” phase of analysis based on a logical process.

Product Review: Dytran 7543A Tri-axial DC Accelerometer & Acquisition Software

2012 Training Schedules Core Training Courses:

• Intro (IVA) – VAI – VAII – VAIII

Concentrated Training Courses: • TWF – Spectrum – Phase – Bearings

Specialty Training Courses:

• ODS/Modal – Precision Balancing

Cover:

The cover this month provides a close-up view of a rolling element bearing virtually destroyed by “fluting” or “electro-erosion” phenomena.

Electro-erosion occurs in rolling element bearings when a current is passed through the bearing instead of a ground source. Variable Frequency Drives (VFD’s) installed on AC induction motors allow speed control; however their drive switching frequencies can also induce stray shaft currents in the motor shaft. Electro-erosion can also be caused by improperly grounded DC Drives, or even from improper grounding while welding on a machine with rolling element bearings.

Another up close look

Time The shacontent Transfor

A Sinufundamespectrum

A Trianand EVare attefrequencor bearin

A Squarbut alsoThe oddin the hresult otruncatio

The Sawfrequencwaveforteeth orassociataccountlike wavresponsimpact t

Finally, “ALL” hfrequencRather amplitud(energy)lubricati

Hardw

Electro-Whateverolling electricaDC typegroundinthese stresistiverolling e“milky” o“groovedproblemof Variacontrol.

Either wdoes norather tpeaks itypically

Domain

ape of a time that will b

rm (FFT).

usoidal Waental frequem. This is typ

ngular WavefVEN harmonicenuated in acies. This isng clearance

re Waveformo induces a d harmonic amigher frequen

of mount looson) condition.

w Tooth Wacy with an ODrm is a resultr cracked beted with uts for the recveform providse is ideal fortesting).

a Random harmonics orcy sources tha jagged noide will increa) friction inon issues in R

ware Insp

Erosion, Arcer you call itelement beaal discharge e motor systemng occasionatray shaft cu

e path. This element bearior “frosted” find” or “washbo

m is more preable Frequen

way, the spectot occur at thhe damage n the spectr

y found in the

Tips:

waveform cabe produced

aveform wiency with npical of a roto

form has a c multiples, han exponentis a typical sig

issues.

m produces a series of OD

mplitudes dimncy range. Tseness or a .

aveform will DD and EVENt of impacts aring racewaultrasonic dctified wavefodes a relativer exciting natu

Waveform wr broadband hat will not prose floor resp

ase or decrean the sourcRolling Eleme

pection T

cing, Stray , it still result

arings. In in rotating mms. Defectiv

ally resulted inrrents went t path, many ngs. The resnish on the suoard” damage

evalent today ncy Drives (

tral signaturehe typical Beacreates a serum. This “100,000 to 1

an indicate thein the Fa

ll produce no harmonicr unbalance r

fundamental however the al fashion wgnature from

fundamental DD harmonic

minish in a lineThis signature

partial rub

produce a fuN harmonic ssuch as defe

ays. Signal demodulation orm shape. Tely flat spectural frequenc

will produce energy from

oduce a domiponse is creaase with the ce. Typically ent Bearings.

Tip:

Currents, ots in the earlthe past prachinery was

ve insulation on bearing damto ground viatimes, was

sult is anywhurface to a me to the racewdue to the in

(VFD’s) for

e is the samearing Defect eries of high“haystack” of80,000 CPM

e harmonic ast Fourier

a single cs in the response.

frequency harmonics

with higher looseness

frequency, c multiples. ear fashion e can be a (waveform

undamental series. This ective gear processing

analysis This pulse-tral energy

cies (bump,

essentially m multiple inant peak.

ated whose amount of

indicates

or Fluting. ly death of roblems of s limited to or improper mage when a the least across the

here from a more drastic

ways. The ntroduction AC speed

. The fault frequency;

h-frequency f peaks is (1600-

Figur

Figur

3000 Hclustersinner ra

If the spectruundetethis me

re 1.0 Freque

re 2.0 Fluting

Hz) frequencs of peaks ocace, outer rac

analyst negum on his cted. If you

easurement is

ncy Respons

– Electro Ero

cy ranges. ccurs at the dce, or sometim

lects to collmotor this have Variab

s a must.

se Table

osion Example

The spacindefect frequenmes both race

ect a high-ffault can e

ble Frequenc

es

g of the ncy of the eways.

frequency easily go cy Drives,

Spectrum Analysis Tip:

The cartoon to the right provides a generic look at the frequency content of Electro-Erosion or “Fluting” as it appears in the vibration spectrum. First, the frequency range. Typically the haystack of peaks finds its way into the [100k CPM to 180k CPM] range. This higher frequency range is a bit higher than the ranged used to detect Rolling Element Bearing (REB) defects. However, since the source of the problem is most often associated with motors and variable frequency drives, the spectrum used to detect Rotor Bar Passing Frequency (RBPF) will easily cover this range.

Secondly, the haystack itself is more orderly than one would think. The peaks are non-synchronous and regularly spaced. The spacing is related to one of the four bearing defect frequencies; FTF, BSF, BPFO, BPFI. The fundamental defect frequencies themselves do not appear, but the haystack spacing suggests which bearing component is causing the problem (raceway, rolling element, or cage).

Next, the amplitude should be of some interest. While the number of peaks can be extensive, suggesting a significant energy source, the amplitudes can be VERY SMALL. Also, there can be more than one source. The spectra at the right show BOTH the BPFO and BPFI raceway fault spacing in multiple “haystacks”.

Finally, the Ultra-sonic Demodulated Spectrum (HFD) should include peaks associated with this high frequency, modulated source. The center frequency is likely a natural frequency of the bearing, carrier, or housing, while the modulation is depicted as the cluster of peaks modulated to the REB fault frequency.

Figure 3.0 Fluting – Cartoon Spectrum Depiction

Figure 4.0 Fluting – AC Induction Motor [BPFO & BPFI]

Figure 5.0 Fluting – AC Induction Motor [BPFO & BPFI]

Approaching Diagnostic Testing

The Icons shown on this month’s cover and to the right are used on the Vibration Analysis Periodic Table to direct the analyst to appropriate diagnostic techniques that may guide his analysis.

When analyzing vibration data, one can appreciate a little insight into the next logical step or data collection to perform. The icons indicate that a Phase Analysis can be performed for this fault, a Time Waveform may provide confirming or refuting data, an Orbit analysis is possible, the Ultra-sonic frequency range should be measured, a Natural Frequency (bump) test can help, or that there is a Formula or calculation associated with this type of fault.

Of course, the analyst will still need to know how to perform the recommended test. That is where training courses come in handy. The Periodic Table is here to narrow the field and get the analyst to the proper diagnosis when time is of the essence.

Product / Literature Reviews: AcqSense: Intelligent Sensor Acquisition Software A recent Dytran Sensor innovation takes advantage of USB connections on any computer to both power the device and acquire measurement data. The 7543A tri-axial sensor itself is quite impressive with a frequency range from DC to 1600 Hz. But the innovation does not stop there. The sensor and associated software application can be setup to store not only the x, y, z transducer response, but also the pitch and roll response. The software can calibrate the sensor, provide offsets relative to installation orientation and can detect and store the sensor temperature. The sensor / software package is scheduled to hit the consumer market soon. The applications range from seismic response to modal analysis. Please note that Full Spectrum Diagnostics is NOT a Dytran sales representative, nor are we profiting from this tech review. We are just a bunch of geeks that like new products and technology. Full Spectrum Diagnostics has no financial connection with any of the books, papers, reference materials, or application notes reviewed in this newsletter. All of the reviews of these materials are first-hand opinions of Full Spectrum Diagnostics’ analysts and instructors.

Figure 6.0 The Vibration Analysis Periodic Table

Figure 7.0 Diagnostic Recommendation Icons

Figure 5.0 Dytran 7543A Tri-Axial DC Accelerometer &Associated Software Application

REMAINING: 2012 CORE VIBRATION TRAINING SCHEDULE IMPLEMENTING A SUCCESSFUL PdM PROGRAM JUN 19-20 Cameron, WI 2012-PdM-01 Tuition: $ 945.00 / 2-day Format Proficiency Test: Included INTRODUCTION TO VIBRATION ANALYSIS APR 17-18 Knoxville, TN 2012-INT-04 Tuition: $ 945.00 / 2-day Format Proficiency Test: Included VIBRATION ANALYSIS I APR 24-27 Wheeling, WV 2012-VA1-03 SEP 11-14 Chicago, IL 2012-VA1-04 DEC 11-14 Charlotte, NC 2012-VA1-05 DEC 18-21 New Orleans, LA 2012-VA1-06 Tuition: $ 1,295.00 / 3-day Format Certification Exam: $ 200.00 VIBRATION ANLAYSIS II MAY 08-11 Chicago, IL 2012-VA2-03 MAY 22-25 Cumming, GA 2012-VA2-04 JUL 10-13 St. Paul, MN 2012-VA2-05 SEP 25-28 Cedar Rapids, IA 2012-VA2-06 Tuition: $ 1,395.00 / 3-day Format Certification Exam: $ 200.00 VIBRATION ANALYSIS IIIa OCT 23-26 Leesport, PA 2012-VA3-01 Tuition: $ 1,595.00 / 4-day Format Certification Exam: $ 200.00 PRACTICAL VIBREATION ANALYSIS IIIb AUG 21-24 St. Paul, MN 2012-PVA-01 Tuition: $ 1,595.00 / 4-day Format Certification Exam: $ 200.00

REMAINING: 2012 SPECIALTY VIBRATION TRAINING SCHEDULE MODAL & ODS ANALYSIS 2 JUL 24-26 St. Paul, MN 2012-ODS-02 For In-Plant Training: ModalGuy@aol.com Tuition: $ 1,595.00 / 3-day Format One Month ME’scope Software Included CONC TIME WAVEFORM ANLAYSIS JUN 05-06 Cedar Rapids, IA 2012-TWF-01 NOV 27-28 Chillicothe, OH 2012-TWF-02 Tuition: $ 945.00 / 2-day Format Proficiency Test: Included CONCENTRATED SPECTRUM ANALYSIS

JUN 26-27 Brookfield, WI 2012-CSA-01 JUL 17-18 Davenport, IA 2012-CSA-02 OCT 02-03 St. Paul, MN 2012-CSA-03

Tuition: $ 945.00 / 2-day Format Proficiency Test: Included CONCENTRATED PHASE ANALYSIS SEP 18-19 Davenport, IA 2012-CPA-01 Tuition: $ 945.00 / 2-day Format Hands-on Exercises: Included CONCENTRATED RE BEARING & GEAR ANLAYSIS OCT 16-17 Cedar Rapids, IA 2012-BGA-01 Tuition: $ 945.00 / 2-day Format Proficiency Test: Included VIBRATION ANALYSIS FOR MOTOR SHOPS AUG 28-30 Charlotte, NC 2012-VAM-01 DEC 04-06 St. Paul, MN 2012-VAM-02 Tuition: $ 1,295.00 / 3-day Format Hands-on Exercises: Included PRECISION BALANCING !!! NEW !!! MAY 01-02 Cedar Rapids, IA 2012-BAL-02 AUG 07-08 Brookfield, WI 2012-BAL-03 NOV 13-14 Wheeling, WV 2012-BAL-04 Tuition: $ 945.00 / 2-day Format Hands-on Exercises: Included

THE VIBRATION FAULT GUIDE

The Vibration Fault Guide is a 110-page indispensable asset for every vibration analyst, as well as a helpful tool to bridge the gap between the analyst and his management staff.

Some 45 Rotating Machinery Faults are Identified and defined. Conveniently sized at 3” x 6”, it easily fits in your pocket for everyday use!

GUÍA DE FALLAS DE VIBRACIÓN

Este manual consta de 110 páginas y fue compilado por Full Spectrum Diagnostics como referencia rápida para la industria de Mantenimiento Predictivo y Monitoreo de Condición. La guía incluye ejemplos de espectros, formas de onda, definiciones de fallos y reglasde análisis de fase para aproximadamente unos 45 problemas que se pueden presentar en maquinaria rotativa.

También incluimos varios estándares de especificaciones de vibración, guías para definición de bandas de alarmas, fórmulas y definiciones de Procesamiento de Señales. Es suficientemente pequeño como para llevarlo en la bolsa de su camisa ( 3.5” X 6.0”), pero su contenido es tan grande que podría ser considerado como una guía de referencia esencial para la industria del Monitoreo de Condición.

THE VIBRATION TECHNIQUES GUIDE

The Vibration Analysis Techniques Guide is a 108-page pocket sized information treasure trove. Information on dozens of analysis techniques, specifications and data presentation formats are included.

If you liked the Vibration Fault Guide, your next educational step should be the Vibration Analysis Techniques Guide get yours now at: Order now at: http://www.fullspec.net/store.html Or by Phone @ (763) 577-9959

BULK DISCOUNTS & BUNDLE PACKAGES

AVAILABLE!

THE The VoveramachpotenVibrat Order Or by BU P

VIBRATI

Vibration Anall Alarm chainery faults. tial faults ation Fault Gu

r now at: Htty Phone @ (

ULK DISCACKAGE

ION ANA

alysis Wall Carts in the These gro

nd zero-in ouide and the

tp://www.full763) 577-99

COUNTS &ES AVAIL

LYSIS W

Chart is a 46center of thupings by fr

on current ve Vibration T

lspec.net/sto959

& BUNDLLABLE!

WALL CHA

6” x 36” Fullhe chart arerequency covibration proTechniques G

ore.html

LE

ART

-Color Lamie surroundeontent and doblem. TheGuide refere

nated Refered by groupdirection alloe Wall Char

ences.

rence for youpings of ovew the analyrt is the ultim

ur drab officer 40 dominst to “narrowmate compa

fs

ce wall. Theant rotating

w-down” theanion to the

sd

e g e e

THE VIBRATION ANALYSIS PERIODIC TABLE This Full Color Laminated 8 ½ x 11 inch card-stock table provides a “quick-look” method of distinguishing one machinery fault from another and suggests Diagnostic Tests or formula that may be used to build a case and make the call! This Chart is a “Logical” analysis tool that classifies vibration problems by Frequency Content and Directional Response. The potential vibration sources are instantly reduced based on the analyst’s current measurement data. The Table “forces” the user to think logically and classify faults accordingly. Individual Faults are Foot Note Referenced to the Vibration Fault Guide for a more detailed review. If you think the Vibration Fault Guide is valuable, your next educational step should be the Vibration Analysis Periodic Table! Get yours now at: www.fullspec.net, or by phone at 763-577-9959 BULK DISCOUNTS & BUNDLE PACKAGES AVAILABLE!

INSTRUCTORS:

Full Spectrum Diagnostics’ Lead Instructor & Seminar Author is Dan Ambre. Dan is a graduate of The University of Iowa with a Bachelor’s degree in Mechanical Engineering, and has completed additional graduate level course work in Engineering Dynamics from The University of Illinois at Chicago, and Florida Atlantic University. Dan is a Certified Vibration Analysis Level III Instructor with over 16 years of Vibration Training and Certification Experience.

Dan’s 25+ years of vibration experience in the Aviation & Aerospace Industries comes from positions at Sundstrand Aviation Corporation and Pratt & Whitney (United Technologies Corporation). This fieldwork includes Vibration & Acoustic testing, Rotor Dynamics analysis of high speed Rotor Systems, Experimental Modal, and Finite Element Analysis.

His consulting experience base comes from positions at Technical Associates and Full Spectrum Diagnostics, which he founded in June of 2000. He is a Registered Professional Engineer in the States of North Carolina and Minnesota.

Dan can be contacted by phone at (612) 875-9959, or via Email at ModalGuy@aol.com

Since 2002, after years of close association, Louis G. Pagliaro joined Full Spectrum Diagnostics. Lou fulfills multiple roles as our Seminar Sales Coordinator, Senior Instructor and course content co-author. Lou is a certified Level III Vibration Analyst (since 1996) and was recently re-certified by American Society of Nondestructive Testing as an ASNT PdM Level III in Vibration Analysis. He has over 30 years of varied industrial experience, including Maintenance Management, Vibration Analysis, Vibration Training, Certification, and course development in areas of Noise Control, Precision Maintenance, Precision Alignment, Preventive Maintenance, and Maintenance Skills Enhancement. His worldwide teaching credentials include instruction of TAC, Update International, CSI, Entek and SKF customers in eight countries. Louis is a graduate of Niagara College in Welland, Canada. Lou can be contacted by phone at (704) 577-3953, or via Email at Lpagl@aol.com.