Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
ELITE - DuaL conTroL / Lhs / rhs
DIEsEL/cng
Wheel planSeating position options
Dual Control Driver +1 Driver +1 RHS Driver +3
C1 Overall wheelbase 209 232 236C2 Axle 2-3 spread 54.9C3 Theoretical wheelbase 181 205 209C4 Overall length 314.5 338 342
Turning circle - overall (feet) 66.0 69.8 74.8Maximum plated vehicle weight 66000Front axle maximum weight 20000Rear axle(s) maximum weight 46000Unladen vehicle weight 17450 17500 17580Front axle unladen weight 10440 10470 10510Rear axle(s) unladen weight 7010 7030 7070Tire size (load Index) Axle 1 315/80R22.5
Axle 2 11R22.5Axle 3 11R22.5Axle 4 ~
C5 Front overhang 66C6 Clearance - cab tilted 51.8C7 Rear overhang (minimum 25.6) 66.5 to TWBC8 Overall height to exhaust tip - nominal 128C9 Cab roof height 116
C10 Cab roof height - tilted 147C11 Cab floor height 34C12 Cab step height 18.4C13 Approach angle 17°C14 Ground clearance at lowest part of vehicle 9C15 Chassis frame height 42.6C16 Minimum road wheel clearance 3.7C17 Minimum body mounting position possible 43
NOTE: Unless otherwise stated, all dimensions are nominal, in inches and represent an unladen vehicle fitted with standard tires; tire deflection is not included. On vehicles equipped with optional air suspension, heights may differ. All specifications are subject to manufacturers tolerances. An allowance of +/- 2% should be made for all weights. All weights are in pounds and include oil and water, and on diesel fuelled vehicles, DEF and 10 gallons of fuel. Additional equipment may alter dimensions and weights quoted.
C10C10
C11C11
C6C6
C16
C12C12
C5C5
C4C4
C13C13
C2C2
C15C15
37C17C17
C7C7
C3C3
C1C1
C9C9C9C8
C14C14
101
115115
97
101
97
August 14/2017DC-E-USUS-1701
PRODUCTION SPECIFICATIONS
ELITE - DuaL conTroL / Lhs / rhs
DIEsEL/cng
caB• Low floor with one step entry.• Cromweld stainless steel construction.• SAE J2422 and J2420 compliant.• GRP moulded roof, wings and front grille.• Electrically and mechanically operated hydraulic
cab tilt mechanism.• Options available for LH / RH or Dual Steer with
two Drivers seats or for Driver + 3 crew with bench seat and individual seat backs.
coMForT & saFETY• Adjustable air suspended driver’s seat with head
and arm rest and adjustable lumbar support (RHS).
• Adjustable air suspended driver’s seat with head and arm rest and adjustable lumbar support (LHS).
• Tilt and telescoping adjustable steering column(s).• Integral 3-point inertia-reel seat belts for driver
and crew.• Dark grey cloth seat trim.• Washable floor covering.• Interior lamps with directable reading lamp.• Tinted glass throughout.• Electric windows with dual controls.• Two half-width sun-blinds.• Electrically adjustable/heated rear view mirrors.• Heated wide-angle rear view mirrors.• (2) Kerb view mirrors.• 2 speed and intermittent windshield wipers with
electric washers.• Safety options:
- Hi Visibility safety steps with non-slip tread. - Front kerb mirror.
• Heavy duty 3 speed blower: - Airflow 21188.8 ft3/h. - Adjustable fascia air vents.
Heating: - 7.7 KW - 50/50 Glycol mix - Flow rate 9L/Min - Coolant temp in: 176°F (80°C)Air on: -4°F (-20°C)Mean temperature difference: 212°F (100°C)
Air conditioning option: - 6.5 kW - Liquid temp: +136.4°F (+58°C) - Evap temp: 23°F (-5°C) - Gas R134a
sToWagE• Rear wet area.• Roof console.• Coat hooks.• Parking brake-actuator caging wrench and cab-
tilt-pump handle securely mounted in cab.
chassIs FraME• Pressed steel channel section, bolted
construction.• Front under-run protection.• Frame width: 35 inch.• Rail section: 13.66 x 3.74 x 3/8 inch.• 3.29 RBM, 120,000 psi frame yield strength.
PErForMancE DaTa• Able to achieve 70 mph.• Stall gradeability: +30%
EngInE• Cummins EPA-2017 ISL 350 bhp 6 cylinder,
8.9 liter in line diesel.• Electronic fuel injection.• DPF and SCR treatment for EPA-17 compliant.• Maximum torque:
1560 Nm @ 1560 rpm.
FuEL sYsTEM• 94 gallon alloy fuel tank with lockable cap.• Fuel micro-filter, heater & pump filter.• 10 gallon DEF reservoir.• NOx Control to EPS-17 standard.
EXhausT• Rear of cab, vertically mounted with high exit tail
pipe.
TransMIssIon• Allison World Series 3000RDS, 6 speed
automatic.• Electronic push-button control(s).• Ratios:
1st 4.59 5th 0.75
2nd 2.25 6th 0.65
3rd 1.54 Reverse 5.00
4th 1.00
aXLEsSTEER• Dana D-2000 W forged “I” section.• Design capacity: 20000 lbs.DRIVE• Dana S-170 Series.• Ratio: 6.14:1.• Combined design capacity: 46000 lbs.
susPEnsIonFRONT• Three leaf parabolic springs.• Telescopic shocks.DRIVE• Hendrickson HN 460 rubber suspension.• Telescopic shocks.
sTEErIng• Integrally powered recirculating ball - 5 turns lock
to lock (approx).
BraKEs• Full air - Twin circuit.• 4S/3.4C Bendix EBS braking with stability control.• Pad wear sensing all around.• Disc brakes all round.• Automatic adjustment.• Asbestos free pads.• 4-wheel parking brake.• Water-cooled compressor:
Single cylinder.• Audible and visual ‘low air’ warning in cab.
roaD WhEELs• 11.25 inch PCD/Pressed steel spigot mounted 10
stud wheels, 22.5 inch diameter.
ELEcTrIcaL sYsTEM• 24 volt primary, 12 volt secondary, negative earth.• Battery: (2) low maintenance, with 180 amp / hour
1200 CCA capacity each.• Alternator: 180 amp.• LED Daytime Running Lamps (dim for turn signal
operation).• Twin, electrically adjustable headlamps.• In-dash 12 V power supply socket.• DIN slot available
(2 speakers fitted as standard). • Provision for load cell weighing systems and
monitor/display units in header panel (3 DIN slots).
• Engine hour meter within display unit with digital clock.
• Electronic instruments in both driving positions include - speedometer - tachometer - coolant temperature - fuel level - DEF level gauge and service brake air pressure gauges.
• Access to fuses and relays in cab and at battery box.
• Battery isolator at battery box.• DC / DC converter for 12 V at battery box
(165 amp rating).
Dennis Eagle Ltd. (the company) reserves the right to change the specification, design, material, procedures and dimensions of the vehicles described herein without prior notice at any time in the future, in accordance with the company’s constant product improvement policy. © Dennis Eagle Ltd. 2017
For more details of specifications and options please consult a Dennis Eagle Sales representative.
Dennis Eagle Ltd. Heathcote Way, Heathcote Industrial Estate, Warwick CV34 6TE. UKwww.dennis-eagle.com e: [email protected] t: +44 (0) 1926-458500
PRODUCTION SPECIFICATIONS