Edition: July 2015

ELEVATOR STEEL WIRE ROPES for North America

SUMMARYTRACTION DRIVE AND COMPENSATING ROPES FOR CONVENTIONAL ELEVATORSIPH 819E

TRACTION DRIVE AND COMPENSATING ROPES FOR HIGH SPEED ELEVATORSIPH 819S IPH 819ECIPH 819SC

OVERSPEED CONTROLLERS GOVERNOR ROPESIPH 825E

IPH VALUE

INSTITUTIONALLATIN AMERICA’S MOST LEADING EDGE INDUSTRIAL LOGISTICS SYSTEM

4

567

8

9

10

2

IPH ROPE GRADE | EQUIVALENTS

Rope grade designation

Rope grade value [N/mm²]

Wire tensile strength gradeOuter [N/mm²] Inner [N/mm²]

1370

1570

1770

1500

1670

1770

1770

1770

1770

210000

234000

248000

TRACTION

Rope grade value [psi]

EHS

ELEVATORS STEEL WIRE ROPES for North AmericaThe elevator is the most used form of transportation worldwide. As buildings around the world are reaching greater heights, the needs for safety and comfort are becoming increasingly important every day.

IPH manufacturers and certifies according to ISO 4344, assuring constructive features suitable for each operation and market. With more than 30 year of experience in producing steel wire ropes for elevators, IPH has the know-how and technology to develop products which meet the highest international standards. Such products are exported to the main markets in Latin America, Europe, U.S.A. and Asia.

With our ability to manufacture the wires and sisal cores used in our elevator ropes, all rope combinations are possible.

For special applications in particular operations, or for ropes not displayed in this brochure, please contact our Technical Sales Department.

IPH QUALITYThe quality certificate issued by IPH guarantees the traceability and conformity with national and international standards that can be applied to the controls carried out throughout the entire manufacturing process, from the wire production to the final product.

MANAGEMENT SYSTEM CERTIFICATIONS:

American Petroleum Institute, API Monogram Spec Q1, Spec 9A.TÜV Rheinland, ISO 9001:2008.Fundaçao Vanzolini NBR, ISO 9001:2008.

WIRE ROPES SPECIFIC CERTIFICATIONS:

Marine use:Lloyd’s Register plant certification.

Elevators:IRAM-INTI and IRAM 840 product certification.

For further information regarding those certificates mentioned above, please visit our web-site.

General purpose:ABNT NBR and ISO 2408 product certification.

Offshore containers lifting slings:DNV 2.7-1 product certification.

3

TRACTION DRIVE AND COMPENSATING ROPES FOR CONVENTIONAL ELEVATORS

Advantages and features• Lubricated high density sisal fiber core withperfectdiameteruniformity.

• Highresistancetobendingfatigue.• Diameteruniformityassuresasmoothrun,freefromvibrationandnoise.

• Speciallubricantfittotractionsheaves.• Thetensilestrengthresistanceofthe“dual”wires,with innerwiresof1770N/mm2 rises theoverallresistancewhiletheouterwiresof1370N/mm2reducetoaminimumthewearonthesheaves.

IPH 819E

4

Diametertolerance

[No load]: +2/+5%[At 10% MBL]: 0/+3%

For conventional elevators, the traction rope recommended is the 8x19 construction, with sisal fiber core manufactured in our facilities. Its excellent fatigue resistance complies with the highest international standards. This is a key factor regarding its life time and safety.

[kN] [lb]

33,246,851,962,874,783,687,6133159187

7500105001170014100168001880019700299003570042000

[kN] [lb]

29,441,546,055,766,274,277,7118141166

66009300

1030012500149001670017500265003170037300

[kg/m] [lb/ft]

0,2180,3070,3400,4110,4900,5480,5750,8701,0401,230

0,1460,2060,2280,2760,3290,3680,3860,5850,6990,827

Minimum breaking load

Construction: 8x19 Class + NFC (natural fiber core) Seale or Warrington may vary according to diameter. TS (1370/1770 N/mm² - dual tensile) or EHS (1770 N/mm² - single tensile).Coating: bright lubricated (galvanized on demand).Spec ref.: ISO 4344/ASME A 17.6.For other rope diameters or grades not specified in this catalog, please contact IPH.

Diameter 1370|1770N/mm²Weightfactor 1770N/mm²

8,009,5010,0011,0012,0012,7013,0016,0017,5019,00

5/16 3/8

-7/16

-1/2

-5/8

11/16 3/4

[mm] [inch]

TotalstretchConstructionalstretch Elasticstretch

Max. 0,6% Max. 0,2%Constructional

+ Elastic

TRACTION DRIVE AND COMPENSATING ROPES FOR HIGH SPEED ELEVATORS

Advantages and features•Highflexibilitysteelcorewithspecialconfiguration.•Highresistancetobendingfatigueandabrasion.•Highbreakingload.•Excellentdiameterstability,whichminimizesvibrationsandnoiseinelevatorsworkinginhighriseelevators.•Speciallubricant,fittotractiondrivesheaves.IPH 819S IPH 819S

Fullsteelcore Steelreinforcedfibercore

5

Unlike the conventional traction drive ropes, high speed elevators ropes are manufactured with an independent wire rope core (IWRC) which has high flexibility due to its special construction. Also are designed in high tensile strength resistance, from grade 1770 N/mm2 to 2160 N/mm2, including a combination of them called “DUAL”.

[kN] [lb]

26,945,463,970,985,8102112118180215225252

60001020014400159001930022900252002640040400484005050056700

[kN] [lb]

-43,260,967,581,797,2107112171205214240

-9700

13700152001830020400241002520038400460004810054000

[kg/m] [lb/ft]

0,1500,2600,3670,4070,4920,5860,6560,6881,0401,2441,3201,470

0,1010,1750,2470,2740,3310,3940,4410,4620,6990,8360,8870,988

Minimum breaking load

Diameter

DiametertoleranceCoretype Constructionalstretch Elasticstretch Totalstretch

1570|1770N/mm²Weightfactor 1770N/mm²

6,008,009,5010,0011,0012,0012,7013,0016,0017,5018,0019,00

Constructional+ Elastic

-5/16 3/8

-7/16

-1/2

-5/8

11/16 -

3/4

[mm] [inch]

Construction: 8x19 Class + IWRC (independent wire rope core) Seale or Warrington may vary according to diameter.Coating: bright lubricated (galvanized on demand).Rope grade: 1570/1770 N/mm² (dual tensile) or 1770 N/mm2 (single tensile).Spec ref.: ISO 4344/ASME A 17.6.For other rope diameters or grades not specified in this catalog, please contact IPH.

Steel reinforcedfiber core [No load]: 0/+3%

At 10% MBL]: -1% min.

Max. 0,3% Max. 0,2%

Max. 0,12% Max. 0,18%Full steel core

HIGH PERFORMANCE WIRE ROPESWire ropes with compacted strands are specially designed for facilities with extremeoperation conditions. Due to its compacted strands, the contact surface on sheavesincreases,minimizingvibration,wearandnoisewhileworking.

Thisistheresultofthereducedsuperficialpressureonthesheaves;whichalsoincreasestherope’sservicelifeandreduceswearonthesheaves. Theincreaseofthemetallicareaduetothecompactedstrandsreducestheelongationpropertiesandincreasesthebreakingloadoftherope.

IPH 819EC

Advantages and features•Lubricatedhighdensitysisalfibercorewithperfectdiameteruniformity.•Increaseofmetallicareaduetothecompactedstrands.Increaseofbreakingloadandlowerelongation.•Higherresistancetobendingfatiguewhichincreasesitsservicelife.•Greaterabrasionresistance.Thisminimizesvibrationsandnoisewhileoperating.

6

Construction: 8x19 SCO + NFC (compacted strands + natural fiber core)Rope grade: EHS 1570/1770 N/mm² (dual tensile) or 1770 N/mm² (single tensile).Coating: bright lubricated (galvanized on request).Spec ref.: ISO 4344.For other rope diameters or grades not specified in the catalog, please contact IPH.

[kN] [lb]

95,299,7151180212

2140022400339004050047700

[kN] [lb]

91,495,8145173204

2050021500326003890045900

[kg/m] [lb/ft]

0,6000,6300,9501,1401,340

0,4030,4230,6380,7660,900

Minimum breaking load

Diameter 1570|1770N/mm²Weightfactor 1770N/mm²

12,7013,0016,0017,5019,00

1/2-

5/8 11/16 3/4

[mm] [inch]

Diametertolerance Constructionalstretch Elasticstretch Totalstretch

Max. 0,6% Max. 0,2%[No load]: 2/+5%

[At 10% MBL]: 0/+3%Constructional

+ Elastic

HIGH PERFORMANCE WIRE ROPES

Construction: 8x19 SCO (compacted strands + IWRC). EHS 1570/1770 N/mm² (dual tensile) and 1770 N/mm2 (single tensile).Coating: bright lubricated (galvanized on demand). Spec ref.: ISO 4344.For other rope diameters or grades not specified in this catalog, please contact IPH.

Advantages and features•Highflexibilitysteelcorewithspecialconfiguration.•Increaseofmetallicareaduetothecompactedstrands.Increaseofbreakingloadandlowerelongation.•Higherbendingfatigueresistanceimprovingservicelife.•Greaterresistancetoabrasion.Thisminimizesvibrationsandnoisewhileoperating.IPH 819SC

7

[No load]: 0/+3%[At 10% MBL]: -1% min.

[kN] [lb]

117123186223262

2630027600419005010059000

[kN] [lb]

113118179214252

2540026500402004810056700

[kg/m] [lb/ft]

0,7200,7501,1401,3601,600

0,4840,5040,7660,9141,075

Minimum breaking load

Diameter 1570|1770N/mm²Weightfactor 1770N/mm²

12,7013,0016,0017,5019,00

1/2-

5/8 11/16 3/4

[mm] [inch]

Max. 0,12% Max. 0,18%Constructional

+ Elastic

Diametertolerance Constructionalstretch Elasticstretch Totalstretch

OVERSPEED CONTROLLERS GOVERNOR ROPES

IPH 825E

Advantages and features•Higherflexibilityduetoitsconstructionwithgreateramountofwires.•Lubricatedhighdensitysisalfibercorewithperfectdiameteruniformity.•Highresistancetobendingfatigueduetoitsflexibledesign.•Uniformityindiameter,whichassuresasmoothtravel,freefromvibrationsandnoises.

8

Max. 0,6% Max. 0,2%[No load]: +2/+5%

[At 10% MBL]: 0/+3%[No load]: +2/+5%

[At 10% MBL]: 0/+3%Constructional

+ Elastic

[kN] [lb]

18,725,446,883,687,6133141166

42005700

105001880019700299003170037300

[kN] [lb]

15,821,541,574,277,7118141166

360048009300

1670017500265003170037300

[kg/m] [lb/ft]

0,1230,1670,3070,5480,5750,8701,0401,230

0,0830,1120,2060,3680,3860,5850,6990,827

Minimum breaking load

Diameter 1370|1770N/mm²Weightfactor 1770N/mm²

6,007,009,5012,7013,0016,0017,5019,00

--

3/8 1/2

-5/8

11/16 3/4

[mm] [inch]

Diametertolerance Constructionalstretch Elasticstretch Totalstretch

Construction: 8x25 Filler + NFC (natural fiber core) TS (1370/1770 N/mm² - dual tensile) EHS (1770 N/mm² - single tensile)Coating: bright lubricated (galvanized on demand). Spec ref.: ISO 4344 and ASME A 17.6.For other rope diameters or grades not specified in this catalog, please contact IPH.

IPH VALUE

1.Detailedandstrictprocesscontrolthatincludes:

2.Traceabilityandcertification.3.Customizedengineeringdesign.4.Skillstaff.5.Customerorientation.

•Metallographicproperties(grainsize,metallographicstructure,inclusions,segregation).•Mechanicalproperties(tensilestrength,hardness,ductility,bendingfatigue,stretch,torsion).•Chemicalproperties(chemicalcomposition,coatingcontrol,lubricantcontent).•Dimensionalproperties(diameter,ovalization,density,length,mass,helixpreforming).On:•Rawmaterial•Patentedwire•Drawnwire•Strand•Sisalcore•Rope

DIMENSIONALDimensionalcontrolsarecarriedoutonthefinishedproductswhichassurediameterregularity.

FATIGUE TESTSFatiguetestssimulaterealworkingconditions,whichallowmonitoringthequalityofourropesatalltimes.

TENSILE STRENGTH / ELONGATION TESTSIntensilestrengthtestbenches,breakingload,diameterreductionunderloadandelongationismonitored.

Tension Setpoint (t):Hold Time (s):

Initial Lenght (mm): Ramp Time (s):

Load Rate (t/min):

Max Tension (t):Max Elongation (mm):

Max Elongation (%): Max Torque (Nm):Min Torque (Nm):

10120006010

7804--------

0.0

0.00

17.3

0.81

34.5

1.61

51.8

2.42

69.1

3.23

86.3

4.030

4

8

2

6

10

Tens

ion

(t)

Elongation (%)

Elongation (mm)CERTIFICATING OF TESTING

9

Foundedin1949inBuenosAires,Argentina,IPHhasbecameoneofthemajorplayersinthemanufacturingofwireropesinLatinAmerica,placingitselfinapositionofleadershipthroughthespecializationinachievingsolutionsforthehighestdemandsinthemarket.

Since itsbeginnings, IPHdevelopedabusinessmodelbased in innovationandhightechinvestment.Itshighqualityandcustomerservicestandardsallowedthecompanytoplaceitselfamongthemostcompetitivemarketsinthefivecontinents.

LocatedinthecityofSanMiguel,BuenosAires,its45.000coveredsquaremeterswiththecapacitytoproduceupto1500Tonspermonth,combinescuttingedgetechnology,highlycapablemanpowerandaQualitySystemcertifiedbytheleadinginternationalstandards.

Theplanningoftheverticallyintegratedproductiveprocessinvolveseverycomponentofthesteelwirerope,fromthemanufacturingofitsownwiresandsteelorfibercores,untilthewoodenorsteelreels,andpackaging,accordingtocustomersspecifications.Thisintegrationmodelisthekeytotheoptimizationofthedesigns,productiveversatilityandsustainabilityandqualityassuranceofitsfinalproducts.

Initstwostate-of-the-artsalesandservicecenters,locatedinBuenosAiresandSanPablo,IPHkeepsthewideststockoffinishedproducts;alongwithfacilitiestomanufactureslingsforvariouspurposes,cuttolength,finalconditioningofproducts,certificationsandlabtesting;offeringthemostcomprehensiveresponseinsolutionsforliftingandhosting.

Thefactory,combinedwiththetwosalesandservicecenters,givestoIPHahighlyefficientoperation,shapingthemostmodernindustrialandlogisticcomplexinLatinAmerica.

LatinAmerica’smostleadingedgeindustriallogisticssystem

10

Service and Sales CenterItapevi, Brazil

San Miguel PlantBuenos Aires, Argentina

Service and Sales CenterBella Vista, Argentina

11

HEADQUARTERS Av. Arturo Illia 4001B1663HRI – San MiguelBuenos Aires – ArgentinaT. (54.11) 4469-8100F. (54.11) 4469-8101ventas@iphglobal.comInfo@iphglobal.com

BRASILIAN BRANCHRua Nova São Paulo 110Refugio Dos Pinheiros CEP 06696-100 – Itapevi – SP – BrasilTel/Fax: (55.11) 4774-7000comercial@iphglobal.comiph@iphglobal.com

www.iphglobal.com

IPH.EVOLUTIONASANATTITUDE

The information displayed in this brochure is updated at the moment of being released. IPH and the manufacturers depicted have the right to modify and adapt its content and specifications as they please without this having any liability. The entire content of this publication is exclusive property of IPH.

© Copyright IPH SAICF, 2015.