Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Printed in Japan HO.AB. JB. BJ. C
JSW Plastics Machinery Inc.
JSW Plastics Machinery (S) Pte Ltd
JSW Plastics Machinery (H.K.) Co., Ltd.
555 South Promenade Ave., Unit 104, Corona, California 92879, U.S.A.Phone: +1-951-898-0934 Fax: +1-951-898-0944540 Capital Drive, Suite 130, Lake Zurich, Illinois 60047,U.S.A.Phone: +1-847-550-0704 Fax: +1-847-550-072524301 Catherine Industrial Drive, Unit 118, Novi, Michigan 48375, U.S.A.Phone: +1-248-449-5422 Fax: +1-248-449-6018
17, Gul Lane, Jurong Town, Singapore 629413, Republic of SingaporePhone: +65-68614511 Fax: +65-68623166Chemdis Bldg., Don Jesus Blvd., Alabang Hills Village, Muntinlupa City,PhilippinesPhone: +63-2-809-8982 Fax: +63-2-809-6221Graha Cevril, Jl. Senopati Raya No.6A, Jakarta 12110, IndonesiaPhone: +62-21-725-7486 Fax: +62-21-725-7865
Room 907, Corporation Park, 11 On Lai Street, Shatin N.T., Hong KongPhone: +852-2648-0720 Fax: +852-2686-8204
JSW Plastics Machinery (M) SDN. BHD.D6-5-G,(Ground Floor), Block D6, Pusat Perdagangan Dana 1,Jalan Pju 1A/46, 47301, Petaling Jaya,Selangor Darul Ehsan, MalaysiaPhone: +60-3-78426076 Fax: +60-3-78426078
JSW Plastics Machinery (T) Co., Ltd.
Gate City Ohsaki-West Tower, 11-1, Osaki 1-chome, Shinagawa-ku,Tokyo 141-0032, JapanPhone: +81-3-5745-2081 Fax: +81-3-5745-2083~84URL http://www.jsw.co.jp/inj_f/inj_index.htm
DivisionHead Quarter:
URL http://www.jsw.co.jp/
Head Office:
Chicago Office:
Detroit Office:
Head Office:
Philippine Office:
Indonesia Office:
78/6 JST Building 4th Fl., Moo 7 King Kaew Road, Rachatewa,Bangplee, Samutprakarn 10540 ThailandPhone: +66-2-738-5272 Fax: +66-2-738-5277
JSW Plastics Machinery Vietnam Ltd.Room103, Techno-Center Thang Long Industrial Park Dong Anh District,Hanoi, Viet NamPhone: +84-4-3951-6383 Fax: +84-4-3951-6384
JSW Plastics Machinery (TAIWAN) Corp.1F., No.23, Da Hu 1st Rd., Guishan Shiang, Taoyuan, Taiwan, R.O.C.Phone: +886-3-396-2102 Fax: +886-3-396-210415F-7, No.689-78, Shiau E. Rd., Yungkang City Tainan, Taiwan, R.O.C.Phone: +886-6-311-4192 Fax: +886-6-311-4193
JSW Plastics Machinery (Shanghai) Corp.28A, Strength Plaza, No.600-4, Tianshan Road, Shanghai, 200051,People,s Republic of ChinaPhone: +86-21-5206-7031 Fax: +86-21-5206-7033
JSW Injection Machine Maintenance(Shenzhen) Co., Ltd.
1/F., Block A, Sanhe Industrial Park,Yongxin Street,Yingrenshi Village,Shiyan Town, Baoan District, Shenzhen, 518108, People,s Republic of ChinaPhone: +86-755-8602-0930 Fax: +86-755-8602-0934
Head Office:
Tainan Office:
J550ADJ650ADJ850ADJ850ADW
J1000ADJ1300ADJ1800AD
Model
Specifications(In U.S. Unit)
Electric Servo DriveInjection Molding Machine
9.06(230)
3.15(80)
11.02
(280)
11.02
(280)
0.1(2)
4.3(110)
5.1(130)
16.5(420)[1400H]19.4(493)[2300H/3100H]
7.5(190)[1400H]7.9(200)[2300H/3100H]
12.8(325)[1400H]13.0(330)
[2300H/3100H]
3.7dia(φ95)[1400H]4.6dia(φ117)[2300H/3100H]
7.9(200)
※Metric specification is in parenthesis
2.4(60)
Min.3.0dia
(76.2dia )
0.16dia
(4dia)
R0.5
※(R10)
0.2(4)2.0(50)
※4.0dia(150dia )
+0.040
0
94.5(2400)
59.1(1500)
341.9(8683)[1400H]・361.6(9183)[2300H/3100H]9.6(243) 332.3(8440)[1400H]・352(8940)[2300H/3100H]
185.2(4704)[1400H]・194.6(4943)[2300H]・201.5(5118)[3100H]159.6(4053)
93.7(2380)[1400H]
105.1(2670)[2300H/3100H]
34.3(870)[1400H]
32.7(830)[2300H/3100H]
87.8(2231)[1400H]
93.1(2364)[2300H/3100H]
66.3(1684)[1400H]
67.1(1704)[2300H/3100H]
85.4(2168)
344.8(8757)[1400H]・354.2(8996)[2300H]・361.1(9171)[3100H]
94.5(2400)
93.3(2370)
47.2(1200) 46.1(1170)
59.8(1520)
2.4(60)
Min.4.0dia
(101.6dia)
0.2(4)
2.0(50)
0.24dia
(6 dia )
※5.0dia(150dia )
+0.040
0
Please contact us in case ofless than 4.0dia.
R0.75
※(R15)
Metric Unit : inch(mm)
J550AD1400H 2300H 3100H
K(Option)
2.60(66)
62.6(1026)
32.9(934)
34900(241)
31300(216)
33.4(547)
2.32(237)
B
3.31(84)
101.5(1663)
53.4(1513)
21600(149)
19400(134)
54.1(887)
4.10(418)
A
2.99(76)
11.811(300)
83.1(1361)
43.7(1238)
26300(182)
23600(163)
6.30(160)
44.3(726)
3.31(338)
210
4.4(40)
Barrel 4、Nozzle 1
34.7
33.1(30)
28.74×7.78×7.87(8.76×2.37×2.40)
4.4(124)
B
3.94(100)
220.5(3613)
116.0(3288)
22600(156)
20300(140)
76.7(1257)
5.29(540)
165
A
3.62(92)
18.111(460)
186.6(3058)
98.2(2783)
26800(185)
24200(167)
6.30(160)
64.9(1064)
4.80(490)
180
7.3(65)
44.5
35.3(32)
30.12×7.78×7.87(9.18×2.37×2.40)
6.0(170)
B
3.62(92)
170.4(2792)
89.6(2541)
22900(158)
20500(142)
64.9(1064)
4.61(470)
180
A
3.31(84)
16.536(420)
142.1(2328)
74.7(2118)
27500(190)
24800(171)
6.30(160)
54.1(887)
4.12(420)
200
7.3(65)
Barrel 5、Nozzle 1
39.2
35.3(32)
30.12×7.78×7.87(9.18×2.37×2.40)
6.0(170)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s (cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
550550
2.0(50)
Open nozzle
Double toggle
607(5400)
66.930(1700)
35.43(900)
15.748~31.497(400~800)
3.83(70)
37.8×35.4(960×900)
54.3×52.0(1380×1320)
21 points
14.6(130)
7.087(180)
96.8(2459)[1400H]・107.8(2739)[2300H]・114.7(2914)[3100H]
To stationary platen top
To hopper mount level
6-M24 depth2.0(51)Take-out robotmount tap
Stationary Platen TopHopper Mount
4-M12 depth 0.8(21)
1"-8UNCdepth 1.7(42)
5/8-11UNCdepth 1.1(27)
Nozzle stroke23.4(595)[1400H]21.3(540)
[2300H/3100H]Max. forward
position 2.0(50)
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Ejector stroke7.087(180)
Ejector rod1.7dia(42dia)
Ejector rod0.94dia(24dia)
Min. mold height 15.748(400)Max. mold height 31.497(800)
Max. stroke35.43(900)
Performance Table Equipment Dimensions and Mold Related Dimensions
Injection Unit
Clamping Unit
General
Item
Model
Unit
2125
17
1310
7
5
8-2.1diaThrough holefor ejector rod
13-1.1diaThrough hole for ejector rod
52 35.414 8 3.5 3 2
33.58
14
37.854.3
2
7 10 131721
5
104-3/4-10UNC depth 1.7Mold mounting hole
Movable PlatenSPI SpecificationUnit : inch Unit : mm
JIS Specification
75
200350
9601380
100
50
75175250325425525
75175250325425 525
625
5075100
900
1320
350
200
13-40diaThrough holefor ejector rod,ejector rod 32dia(M16 depth 27)
104-M20 depth 43Mold mounting hole
8-60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
Electric Servo DriveInjection Molding Machine
1400H
2300H/3100H
96.4(2449)
48.8(1240) 47.6(1209)
59.4(1510)
95.5(2425)
59.1(1500)
384.6(9768)[2300H/3100H]・423.3(10752)[3900H]375(9525)[2300H/3100H]・413.7(10509)[3900H]
32.7(830)
195.8(4973)[2300H]・202.7(5148)[3100H]・224.1(5692)[3900H]181.4(4608)
105.1(2670)[2300H/3100H]
116.1(2948)[3900H]
93.1(2364)[2300H/3100H]
95.6(2427)[3900H]
109(2769)[2300H]・115.9(2944)[3100H]・122.4(3109)[3900H]
377.2(9581)[2300H]・384.1(9756)[3100H]・405.5(10300)[3900H]
9.6(243)
J650AD2300H 3100H 3900H
B
3.62(92)
170.4(2792)
89.6(2541)
22900(158)
20500(142)
64.9(1064)
4.61(470)
180
A
3.31(84)
16.536(420)
142.1(2328)
74.7(2118)
27500(190)
24800(171)
6.30(160)
54.1(887)
4.12(420)
200
39.2
40.8(37)
32.05×8.04×7.97(9.77×2.45×2.43)
6.0(170)
B
4.33(110)
290.0(4752)
152.5(4324)
22100(153)
20000(138)
92.8(1521)
6.07(620)
150
A
3.94(100)
19.685(500)
239.7(3927)
126.1(3574)
26800(185)
24200(167)
6.30(160)
76.7(1257)
5.39(550)
165
46.3
43.0(39)
34.74×8.04×7.97(10.75×2.45×2.43)
12.0(340)
B
3.94(100)
220.5(3613)
116.0(3288)
22600(156)
20300(140)
76.7(1257)
5.29(540)
165
A
3.62(92)
18.111(460)
186.6(3058)
98.2(2783)
26800(185)
24200(167)
6.30(160)
64.9(1064)
4.80(490)
180
7.3(65)
44.5
40.8(37)
32.05×8.04×7.97(9.77×2.45×2.43)
6.0(170)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s (cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
650650
2.0(50)
Open nozzle
Barrel 5、Nozzle 1
Double toggle
717(6380)
78.742(2000)
39.37(1000)
17.717~39.371(450~1000)
3.83(70)
41.7×37.8(1060×960)
59.1×55.1(1500×1400)
25 points
21.4(190)
7.874(200)
Movable PlatenSPI Specification JIS Specification
140-M24 depth 51Mold mounting hole
13-40diaThrough holeforejector rod,ejector rod 32dia(M16 depth 27)
50
50
175
75
250325 425 525 625
75
200100
350
1060500
1500
75100
125
200
960
1400
350
625525425325250
75175
12-60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
To stationary platen top
To hopper mount level
Performance Table Equipment Dimensions and Mold Related Dimensions
Unit : inch Unit : mm
86.9(2208)
67.1(1704)[2300H/3100H]
67.5(1714)[3900H]
Electric Servo DriveInjection Molding Machine
Hopper Mount
1"-8UNCdepth 1.7(42)
5/8-11UNCdepth 1.1(27)
0.1(2)
Ejector stroke7.874(200)
Ejector rod0.9dia(24dia)
Nozzle stroke22.4(570)
Max. forwardposition 2.0(50)
Min. mold height 17.717(450)Max. mold height 39.371(1000)
Max. stroke39.37(1000)
Ejector rod1.7dia(42dia)
8.3
(212)
10.2
(260)
4-M16depth 1.1(27)
4.7dia(120dia)
19(482)11.6(295)
11(280)
10(253)
4.3(108)
4-M12depth 0.8(21)
4.3
(110)
5.1(130)
4.6dia(117dia)
13(330)
19.4(493)7.9
(200)
7.9
(200)
Min4.0dia
(101.6dia)
0.24dia
(6dia)
0.2(4)
R0.75※(R15)
2.0(50)
2.4(60)
9.06(230)
3.15(80)
11.02
(280)
11.02
(280)
6-M24depth 2.0(51)Take-out robotmount tap
7 10 131721 25
5
233.581420
41.7
59.1
55.1 37.8 14 8 3.5 3 25
2125
17131075
12-2.1diaThrough holefor ejector rod
128-3/4-8UNC depth 1.7Mold mounting hole
13-1.1diaThrough holefor ejector rod
94.5(2400)
Metric Unit : inch(mm)
※5.0dia(150dia )
+0.040
0
※Metric specification is in parenthesis
2300H/3100H
3900H
Please contact us in case ofless than 4.0dia.
Stationary Platen Top
850850Performance Table Equipment Dimensions and Mold Related Dimensions
101.2(2569)
51.8(1315) 49.4(1254)
63(1600)
101.6(2580)
59.1(1500)
413.1(10493)[3100H]・451.9(11477)[3900H/5200H]
403.5(10250)[3100H]・442.3(11234)[3900H/5200H]
203.5(5168)[3100H]・224.9(5712)[3900H]・234.3(5952)[5200H]209.2(5313)
105.1(2670)[3100H]
116.1(2948)[3900H/5200H]
32.7(830)
93.1(2364)[3100H]
95.6(2427)[3900/H5200H]
67.1(1704)[3100H]
67.5(1714)[3900H/5200H]
90.7(2303)
116.7(2964)[3100H]・123.2(3129)[3900H]・132.6(3369)[5200H]
412.7(10481)[3100H]・434.1(11025)[3900H]・443.5(11265)[5200H]
9.6(243)
94.5(2400)
To stationary platen top
To hopper mount level
Electric Servo DriveInjection Molding Machine
16- 60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
13-40diaThrough holefor ejector rod,ejector rod 32dia(M16 depth 27)
144-M24 depth 51Mold mounting hole
5075100125200
350500
10601590
725625525425325
250
175
1590
1060 350500
200
100
125
75 50
175250 325425 525625725
J850AD3100H 3900H 5200H
B
3.94(100)
220.5(3613)
116.0(3288)
22600(156)
20300(140)
76.7(1257)
5.29(540)
165
A
3.62(92)
18.111(460)
186.6(3058)
98.2(2783)
26800(185)
24200(167)
6.30(160)
64.9(1064)
4.80(490)
180
44.5
52.9(48)
34.42×8.43×8.46(10.49×2.57×2.58)
6.0(170)
B
4.72(120)
379.6(6220)
199.7(5660)
21300(147)
19100(132)
107.0(1753)
6.86(700)
140
A
4.33(110)
21.654(550)
319.0(5227)
167.8(4757)
25300(175)
22900(158)
6.10(155)
89.9(1473)
6.17(630)
150
53.7
55.1(50)
37.11×8.43×8.46(11.48×2.57×2.58)
12.0(340)
B
4.33(110)
290.0(4752)
152.5(4324)
22100(153)
20000(138)
92.8(1521)
6.07(620)
150
A
3.94(100)
19.685(500)
239.7(3927)
126.1(3574)
26800(185)
24200(167)
6.30(160)
76.7(1257)
5.39(550)
165
7.3(65)
46.3
55.1(50)
37.11×8.43×8.46(11.48×2.57×2.58)
12.0(340)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s(cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
2.0(50)
Open nozzle
Barrel 5、Nozzle 1
Double toggle
937(8340)
90.553(2300)
47.24(1200)
19.685~43.308(500~1100)
3.83(70)
41.7×41.7(1060×1060)
62.6×62.6(1590×1590)
25(29) points
25.9(230)
7.874(200)
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
Stationary Platen TopHopper Mount
1"-8UNCdepth 1.7(42)
0.1(2)
Ejector stroke 7.874(200)
Ejector rod 1.7dia(42dia)
Nozzle stroke23.2(590)Max. forwardposition 2.0(50)
Min. mold height 19.685(500)Max. mold height 43.308(1100)
Max. stroke47.24(1200)
Min4.0dia
(101.6dia)
0.24dia
(6dia)
0.2(4)
R0.75(R15)※
2(50)
2.4(60)
9.06(230)
3.15(80)
11.02
(280)
11.02
(280)
6-M24depth 2.0(51)Take-out robotmount tap
10 13 17 21 25 29
7
23581420
41.7
62.6
62.6
41.7
1420 8 5 3 2
25
29
21
17
13
107
25-2.1diaThrough holefor ejector rod
144-1"-8UNCdepth 2.0Mold mounting hole
8.3
(212)
10.2
(260)
4-M16depth 1.1(27)
4.7dia(120dia)
19(482)11.6(295)
5.1(130)
11(280)
10(253)
4.3(108)
4-M12depth0.8(21)
4.3
(110)
5.1(130)
4.6dia(117dia)
13(330)
19.4(493)7.9
(200)
7.9
(200)
Movable PlatenSPI Specification JIS Specification
Unit : inch Unit : mm
※
※Metric specification is in parenthesis
Metric Unit : inch(mm)
3100H
3900H/5200H
5.0dia(150dia )
+0.040
0
Please contact us in case ofless than 4.0dia.
96.5(2450)
13-40diaThrough holefor ejector rod,ejector rod 32dia(M16 depth 27)
16- 60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
5075100125200
350500
1320
1900
184-M24 depth 51Mold mounting hole
Equipment Dimensions and Mold Related DimensionsMetric Unit : inch(mm)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s (cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Stationary Platen Top
B
4.72(120)
379.6(6220)
199.7(5660)
21300(147)
19100(132)
107.0(1753)
6.86(700)
140
A
4.33(110)
21.654(550)
319.0(5227)
167.8(4757)
25300(175)
22900(158)
6.10(155)
89.9(1473)
6.17(630)
150
53.7
61.7(56)
37.14×9.45×8.99(11.49×2.88×2.74)
12.0(340)
37.14×9.45×8.99(11.49×2.88×2.74)
12.0(340)6.0(170)
59.5(52)
1"-8UNCdepth 1.7(42)
Ejector stroke7.874(200)
8.3
(212)
10.2
(260)
4-M16depth 1.1(27)
4.7dia(120dia)
19(482)
11.6(295)5.1
(130)
11(280)
10(253)
4.3(108)
4-M12depth0.8(21)
4.3
(110)
5.1(130)
4.6dia(117dia)
13(330)
19.4(493)7.9
(200)
7.9
(200)
3100H
3900H/5200H
Max. stroke47.24(1200)
Movable PlatenSPI Specification JIS Specification
175
250
325
425 525625725825
Unit : inch Unit : mm
11.81(300)
3.15(80)
14.76
(375)14.76
(375)
6-M24depth 2.0(51)Take-out robotmount tap
Min4.0dia
(101.6dia)
0.24dia
(6dia)
0.2(4)
R0.75※(R15)
2.0(50)
2.4(60)
※Metric specification is in parenthesis
※5.0dia(150dia )
+0.040
0
0.1(2)
Ejector rod1.7dia(42dia)
Nozzle stroke25.6(650)
Max. forwardposition 2.0(50)
Min. mold height 19.685(500)Max. mold height 43.308(1100)
252933
21
17
13
107
10 13 17 21 25 29 33
7
25-2.1diaThrough holefor ejector rod
184-1"-8UNCdepth 2.0Mold mounting hole2
3581420
52
74.8
70.952
1420 8 5 3 2
1800
1320 350500
200
100
125
75 50
825
625725
525
425
325
250
175
113.4(2879)
57.9(1470) 55.5(1409)
74.8(1900)
107.9(2740)
63(1600)
9.6(243)
413.5(10503)[3100H]・452.2(11487)[3900H/5200H]
403.9(10260)[3100H]・442.7(11244)[3900H/5200H]
413.1(10491)[3100H]・434.5(11035)[3900H]・443.9(11275)[5200H]
207.2(5263) 205.9(5228)[3100H]・227.3(5772)[3900H]・236.7(6012)[5200H]
119.1(3024)[3100H]・125.6(3189)[3900H]・135(3429)[5200H]
109.1(2770)[3100H]
120(3048)[3900H/5200H]
97(2464)[3100H]
99.5(2527)[3900/H5200H]
99.8(2535)
To stationary platen top
71(1804)[3100H]
71.4(1814)[3900H/5200H]
To hopper mount level
36.6(930)
Please contact us in case ofless than 4.0dia.
16- 60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
10001000
0.1(2.0)
0.24dia
(6dia)
5.0dia(150dia )
+0.040
0
0.2(4)
11.81(300)
3.15(80)
14.76
(375)
14.76
(375)
6-M24depth 2.0(51)Take-out robotmount tap
Min.4.0dia(101.6dia)
Please contact us in case ofless than 4.0dia.
Ejector stroke7.874(200)
Max. stroke51.18(1300) Min. mold height 19.685(500)
Max. mold height 47.245(1200)
Nozzle stroke25.6(650)
Max. forwardposition 2.0(50)
Ejector rod1.7dia(42dia)
1”-8UNC depth1.7(42)
13-40diaThrough holefor ejector rod,ejector rod 32dia(M16 depth 27)
184-M24 depth 51Mold mounting hole
825725625525425325250
175
175250325425 525625725825
5075100125200350500
13201900
1800
1320
500
350
200
125
100 75 50
74.8(1900)
116.9(2969)225.0(5714)
To tie-bar top
205.9(5228)[3100H]・227.3(5772)[3900H]・236.7(6012)[5200H]
97.0(2464)[3100H]
99.5(2527)[3900H/5200H]
109.1(2770)[3100H]
120.0(3048)[3900H/5200H]
63.0(1600)
36.6(930)
119.1(3024)[3100H]・125.6(3189)[3900H]
135.0(3429)[5200H]
430.9(10942)[3100H]・452.3(11486)[3900H]・461.7(11726)[5200H]
421.7(10710)[3100H]・460.4(11694)[3900H/5200H]
431.3(10954)[3100H]・470.0(11938)[3900H/5200H]
9.6(244)
57.9(1470) 59.0(1499)
109.3(2775)
71.0(1804)[3100H]
71.4(1814)
[3900H/5200H]
100.8(2560)
To stationary platen top
4.3
(110)
5.1(130)13(330)
19.4(493)7.9
(200)
7.9
(200)
4-M12 depth 0.8(21) 2.0(50)
2.4(60)
96.9(2460)
To hopper mount level
3100H
3900H/5200H
R0.75(R15)※
4-M16depth 27(1.1)19(482)
11.6(295)
8.3
(212)
11(280)
10(253)
10.2
(260)
4.3(108)
5.1(130)
※
※Metric specification is in parenthesis
4.6dia(117dia)
4.7dia(120dia)
Stationary Platen TopHopper Mount
Performance Table Equipment Dimensions and Mold Related Dimensions
Electric Servo DriveInjection Molding Machine
J1000AD3100H 3900H 5200H
B
3.94(100)
220.5(3613)
116.0(3288)
22600(156)
20300(140)
76.7(1257)
5.29(540)
165
A
3.62(92)
18.111(460)
186.6(3058)
98.2(2783)
26800(185)
24200(167)
6.30(160)
64.9(1064)
4.80(490)
180
44.5
67.2(61)
35.94×9.74×9.10(10.95×2.97×2.78)
6.0(170)
B
4.72(120)
379.6(6220)
199.7(5660)
21300(147)
19100(132)
107.0(1753)
6.86(700)
140
A
4.33(110)
21.654(550)
319.0(5227)
167.8(4757)
25300(175)
22900(158)
6.10(155)
89.9(1473)
6.17(630)
150
53.7
70.5(64)
39.14×9.74×9.10(11.94×2.97×2.78)
12.0(340)
B
4.33(110)
290.0(4752)
152.5(4324)
22100(153)
20000(138)
92.8(1521)
6.07(620)
150
A
3.94(100)
19.685(500)
239.7(3927)
126.1(3574)
26800(185)
24200(167)
6.30(160)
76.7(1257)
5.39(550)
165
7.3(65)
46.3
70.5(64)
39.17×9.74×9.10(11.94×2.97×2.78)
12.0(340)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s (cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
2.0(50)
Open nozzle
Barrel 5、Nozzle 1
Double toggle
1103(9810)
98.427(2500)
51.18(1300)
19.685~47.245(500~1200)
3.83(70)
52.0×52.0(1320×1320)
74.8×70.9(1900×1800)
25(29) points
25.9(230)
7.874(200)
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
Movable PlatenSPI Specification JIS SpecificationUnit : inch Unit : mm
Metric Unit : inch(mm)
332925211713107
7 10 13 17 21 25 29 33
23581420
5274.8
70.9
5220 148 5 3 2
25-2.1diaThrough hole for ejector rod
184-1"-8UNC depth 2.0Mold mounting hole
13001300
77.2(1960)
120(3050)
253.3(6434)
66.9(1700)
9.6(244)
59.4(1510) 60.6(1540)
118.7(3015)
486(12346)[3900H]・495.5(12586)[5200H]・514.1(13059)[7500H]
232.7(5912)[3900H]・242.2(6152)[5200H]・260.8(6625)[7500H]
131.0(3329)[3900H]140.5(3569)[5200H]151.6(3852)[7500H]
109.1(2770)
124.0(3148)[3900H/5200H]
125.7(3193)[7500H]
103.4(2627)[3900/H5200H]
106.2(2697)[7500H]
40.5(1030)[3900H/5200H]37.8(960)[7500H]
494.2(12554)[3900H/5200H]・515.1(13084)[7500H]
503.8(12798)[3900H/5200H]・524.7(13328)[7500H]
To tie-bar top
To stationary platen top
103.5(2630)
75.4(1914)[3900H/5200H]
77.1(1959)[7500H]
To hopper mount level
3900H/5200H
4-M16depth 1.1(27)19(482)
11.6(295)
8.3
(212)
8.3
(212)
11(280)10
(253)
10.2
(260)
4.3(108)
5.1(130)
7500H
5.1(130)
21.7(550)11.6(295)
4-M16depth 1.1(27)
13.8(350)10
(253)
4.3(108)
10.2
(260)
11.81(300)
3.15(80)
14.76
(375)
14.76
(375)
6-M24depth 2.0(51)Take-out robotmount tap
0.24dia(6dia)
5.0dia(150dia )
+0.040
0
0.2(4)
0.2(4)
3900H/5200H
7500H
Min.4.0dia
(101.6dia)
Please contact us in caseof less than 4dia.
Please contact us in caseof less than 4.0dia.
2.0(50)
2.0(50)
2.4(60)
4.7(120)
R0.75(R15)※
R0.75(R15)
0.24dia
(6dia)
Min.4.0dia
(101.6dia)
0.1(2.0)
Ejector stroke 9.843(250)
Max stroke59.06(1500) Min. mold height 25.591(650)
Max. mold height 51.182(1300)
Nozzle stroke31.1(790)
Ejector rod1.7dia(42dia)
1"-8UNCdepth 1.7(27)
4.7dia(120dia)
5.9dia(150dia)
※
5.0dia(150dia )
+0.040
0
※
※Metric specification is in parenthesis
Max. forwardposition 2.0(50)
※
Stationary Platen TopHopper Mount
Performance Table Equipment Dimensions and Mold Related Dimensions
Electric Servo DriveInjection Molding Machine
J1300AD3900H 5200H 7500H
B
4.33(110)
290.0(4752)
152.5(4324)
22100(153)
20000(138)
92.8(1521)
6.07(620)
150
A
3.94(100)
19.685(500)
239.7(3927)
126.1(3574)
26800(185)
24200(167)
6.30(160)
76.7(1257)
5.39(550)
165
46.3
92.6(84)
41.99×10.01×9.89(12.80×3.05×3.02)
12.0(340)
B
5.12(130)
534.6(8760)
281.2(7972)
22100(153)
19500(135)
105.3(1726)
7.15(730)
130
A
4.72(120)
25.985(660)
455.5(7464)
239.6(6793)
26100(180)
22900(158)
5.12(130)
89.7(1470)
6.86(700)
140
Barrel 5、Nozzle 2
72.8
95.9(87)
43.73×10.01×9.89(13.33×3.05×3.02)
12.0(340)
B
4.72(120)
379.6(6220)
199.7(5660)
21300(147)
19100(132)
107.0(1753)
6.86(700)
140
A
4.33(110)
21.654(550)
319.0(5227)
167.8(4757)
25300(175)
22900(158)
6.10(155)
89.9(1473)
6.17(630)
150
7.3(65)
53.7
92.6(84)
41.99×10.01×9.89(12.80×3.05×3.02)
12.0(340)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s (cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
2.0(50)
Open nozzle
Barrel 5、Nozzle 1
Double toggle
1439(12800)
110.238(2800)
59.06(1500)
25.591~51.182(650~1300)
3.55(65)
55.1×55.1(1400×1400)
78.7×78.7(2000×2000)
25(29) points
33.7(300)
9.843(250)
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
Movable PlatenSPI Specification JIS SpecificationUnit : inch Unit : mm
Metric Unit : inch(mm)
37332925211713107
7 10 13 17 21 25 29 33 37
23581420
55.178.7
78.7
55.1
20 148 5 3 2
25-2.1diaThrough holefor ejector rod
228-1"-8UNC depth 2.0Mold mounting hole
925825725625525425325250
175
175250325425 525625725825925
5075100125200350500
14002000
2000
1400
500
350
200
125
100 75 50
228-M24 depth 51Mold mounting hole
16- 60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
13-40diaThrough holefor ejector rod,ejector rod 32dia(M16 depth 27)
18001800
100.8(2560)
145.6(3700) 283.4(7199)
76.8(1950)
13(329)
72.2(1835) 73.4(1865)
134.4(3415)
119.3(3030)
531.1(13491)[5200H]・549.8(13964)[7500H]・569.5(14467)[9500H]
247.7(6292)[5200H]・266.4(6765)[7500H]・286.1(7268)[9500H]
146.0(3709)[5200H]・157.2(3992)[7500H]・170.8(4339)[9500H]
123.8(3145)
113.3(2877)[5200H]
116.0(2947)[7500H/9500H]
133.8(3398)[5200H]
135.6(3443)[7500H]
136.9(3478)[9500H]
50.4(1280)[5200H]
47.7(1210)[7500H]
37.8(960)[9500H]
528.5(13424)[5200H]・547.4(13904)[7500H]・556.3(14130)[9500H]
541.5(13753)[5200H]・560.4(14233)[7500H]・569.3(14459)[9500H]
85.2(2164)[5200H]
87.0(2209)[7500H]
88.3(2244)[9500H]
To tie-bar top
To stationary platen top
To hopper mount level
5200H
9500H
7500H
4-M16depth 1.1(27)
14.6(371)
4-M16depth 1.1(27)
19(482)
5.1(130)
8.3
(212)
11(280)
10(253)
10(253)
10(253)
10.2
(260)
4.3(108)
11.6(295)
8.3
(212)
10.2
(260)
5.1(130)
21.7(550)11.6(295)4-M16
depth 1.1(27)
13.8(350)
4.3(108)
4.3(108)
8.3
(212)
10.2
(260)
22.9(581)12.2(310)5.7(145)
10-M24depth 2(51)Take-out robotmount tap
7.87(200)
9.06(230)
17.72
(450)
17.72
(450)
7.87(200)
7.87(200)
0.24dia
(6dia)
0.24dia
(6dia)
5.0dia(150dia )
+0.040
0
5.0dia(150dia )
+0.040
0
0.2(4)
5200H
7500H/9500H
Min.4.0dia
(101.6dia)
Min.4.0dia(101.6dia)[7500H]
Min.4.5dia(114.3dia)[9500H]
0.2(4)
Please contact us in caseof less than 4.0dia.
Please contact us in caseof less than 4.0dia.
2.0(50)
2.4(60)
2(50)
4.7(120)[7500H]5.9(150)[9500H]
7.87(200)
R0.75(R15)
R0.75(R15)
0.1(3)
Ejector stroke 11.811(300)
Max stroke66.93(1700) Min. mold height 31.496(800)
Max. mold height 59.056(1500)
36.6(930)[5200H/7500H]39.4(1000)[9500H]
Ejector rod1.7dia(42dia)
1"-8UNCdepth 1.7(42)
※
※
※Metric specification is in parenthesis
Max. forwardposition 2.0(50)
Nozzle stroke
312-M24 depth 51Mold mounting hole50
75100125
200350500
18502550
650
82592510251125
725625525425325
250175
150
2320
1620
500
350
200
125
150
100 75 50 175
250325425525
625725 8259251025
650
37- 60diaThrough holefor ejector rod,ejector rod 50dia(M24 depth 39)
4.7dia(120dia)
5.9dia(150dia)
6.7dia(170dia)
※
※
Performance Table Equipment Dimensions and Mold Related Dimensions
Electric Servo DriveInjection Molding Machine
J1800AD5200H 7500H 9500H
B
4.72(120)
379.6(6220)
199.7(5660)
21300(147)
19100(132)
107.0(1753)
6.86(700)
140
A
4.33(110)
21.654(550)
319.0(5227)
167.8(4757)
25300(175)
22900(158)
6.10(155)
89.9(1473)
6.17(630)
150
7.3(65)
Barrel 5、Nozzle 1
53.7
131.2(119)
44.96×12.14×11.20(13.75×3.70×3.42)
12.0(340)
B
5.51(140)
671.7(11007)
353.3(10016)
22400(155)
20300(140)
122.1(2001)
8.62(880)
130
A
5.12(130)
28.150(715)
579.1(9490)
304.6(8636)
26100(180)
23400(162)
5.12(130)
105.3(1726)
8.33(850)
135
8.4(75)
Barrel 5、Nozzle 2
90.4
144.4(131)
47.46×13.80×11.20(14.47×4.21×3.42)
12.0(340)
B
5.12(130)
534.6(8760)
281.2(7972)
22100(153)
19500(135)
105.3(1726)
7.15(730)
130
A
4.72(120)
25.985(660)
455.5(7464)
239.6(6793)
26100(180)
22900(158)
5.12(130)
89.7(1470)
6.86(700)
140
7.3(65)
72.8
134.5(122)
46.70×12.14×11.20(14.23×3.70×3.42)
12.0(340)
in (mm)
in (mm)
in3(cm3)
oz(g)
psi (Mpa)
psi (Mpa)
in/s (mm/s)
in3/s (cm3/s)
oz/s (kg/h)
rpm(min-1)
USton(kN)
in (mm)
kW
USton (kN)
in (mm)
in (mm)
in (mm)
ft/s (m/min)
in (mm)
in (mm)
USton (kN)
in (mm)
USton ( t )
ft (m)
ft3 ( l )
2.0(50)
Open nozzle
Double toggle
1990(17700)
125.987(3200)
66.93(1700)
31.496~59.056(800~1500)
3.28(60)
72.8×63.8(1850×1620)
100.4×91.3(2550×2320)
25(37) points
42.7(380)
11.811(300)
Screw barrel type
Screw diameter
Screw stroke
Theoretical injection capacity
Injection capacity(GP-PS)
Injection pressure(Max.)
Holding pressure(Max.)
Injection speed
Injection rate
Plasticizing rate(GP-PS)
Screw speed
Nozzle touch force
Nozzle stroke from platen
Type of nozzle
Barrel temperature control
Heater wattage
Mechanism
Clamping force
Daylight opening(Max.)
Opening stroke(Max.)
Mold height
Platen speed
Distance between tie-bars(H×V)
Platen size(H×V)
Ejector point
Ejector force
Ejector stroke
Machine weight
Machine dimensions(L×W×H)
Hopper capacity(Option)
Remarks:1.Maximum injection pressure and maximum holding pressure may be restricted due to molding condition.2.The theoretical injection capacity is( cross sectional area of barrel)×( st roke of screw).3.The injection capacity is applicable for GP-PS and variable according to the grade of resin, molding conditions and mold.4.The plasticizing rate is applicable for GP-PS.5.PC, HPVC, other engineering plastic, etc., low temperature setting and high speed molding may require a high torque depending on the grade or molding conditions. Please contact us if you plan.Note:1.Due to continual improvements, specifications are subject to change without notice.2.Actual figures of the specification will vary depending on final machine configuration. Please contact us if you require more specific data.3.Performance specifications are based on theoretical data.4.1MPa=10.2 kgf/cm2,1kN=0.102tf
Injection Unit
Clamping Unit
General
Item
Model
Unit
Movable PlatenSPI Specification JIS SpecificationUnit : inch Unit : mm
Metric Unit : inch(mm)
33374145
2925211713107
7 10 13 17 21 25 29 33 37 41
356.9142025.6
72.8100.4
91.3
63.8
25.6 20 14 6.9 5 3
25-2.1diaThrough holefor ejector rod
320-1"-8UNC depth 2.0Mold mounting hole
Stationary Platen TopHopper Mount
Open nozzleN2000F barrelChrome plated screwPurge cover(with limit switch)Injection unit swiveling device(with limit switch)Screw cold start preventionMolding/Pause temperature selectAuto purging circuitNozzle retract selectPull-back selectAuto grease lubricationInjection/Meteringprogrammed control
Holding pressure transfer select
Holding pressurecontrol select
Barrel temperature control(PID)Nozzle temperature control(PID/SSR)Synchronous temperature rise controlHopper flange temperature controlSoft pack servo controlHAVC (High Accuracy Volume Control)IWCS (Injection Weight and Cushion Stability) controlReverse seal controlGrease-free toggle bushingAuto grease lubricationHigh-performance platen supportFlat press platen mechanism(Stationary side/Movable side)
Mold open/close andEjector programmed control
Mold protectionEjector braking systemElectric-driven mold thickness adjusting deviceAuto clamp force settingClamp force displayClamp force feed back control
Toggle type injectioncompression function
Clamping safety device (Electrical/Mechanical)Robot mounting holes
Compound action
Safety mat
Clamping Unit
Injection and Plasticizing Unit
Item Item
Controller
Monitor
Others
Touch panel 15” TFT color LCD controller120 Mold condition storage(Internal memory)Soft start moldingSelf diagnostics functionHelp functionPop-up displayClockMulti-language select(English, Chinese, Japanese)Print screen by USB memoryUSB printer portOverall setting screenPre-heat timerProduct takeout robot circuitAttended/Unattended operation selectEmergency stop buttonSafety keyActual value displayMold temperature displayInjection/Metering waveform monitorOscilloscope waveform monitorInjection/Metering waveform storageBarrel temperature monitorInjection pressure monitorStatistical graphProduction monitorCumulative operating hour displayCycle monitorMolding condition upper/lower limit monitorInspection and Maintenance guideHeater system fault alarmInjection pressure overshoot alarmGrease lubrication fault alarmServo fault alarmUnreleased clamp alarmPosition calibration requestAlarm buzzerAlarm historySet value historySafety compliance to JIMS K1001Cooling water closed circuit for feed throatMold cooling water circuit (Machine bed)Accessories (Maintenance tools, Ejector rods, etc.)
Note6
Note7
Note8
Note9
Note10
Standard Equipment List Options List
Item ItemLong nozzleShut-off nozzles(Pneumatic type and Hydraulic type)LSP-2 screw (Abrasion-resistant type)
Wide selection of screws & barrels
Barrel Insulation coverBarrel blower cooling unitHopper(Option for all the region)High holding pressure molding(for long-time holding pressure molding)Electric motor driven IU advance/retractVented barrelDaylight extensionT-slot platenLocating ringAir jetCore pull device(Pneumatic type and Hydraulic type)Valve gate device(Pneumatic type and Hydraulic type)Auto safety gate openAuto safety gate open/closeSafety matSafety footplateMold clamperMold setup deviceMagnet mold ClamperCooling water manifold on platenHydraulic power packEjector braking system
Others
Electrical Instrumentation and Control
Clamping Unit
Injection Unit
Multi-language select(French, Spanish or Hangul)Simple centralized monitor system Link10Centralized control system NET100Heater burnout alarmMold temperature display(with mold temperature upper/lower limit alarm)Mold temperature control(with mold temperature upper/lower limit alarm)Printer(with printer cable)Password FunctionHot runner control circuitUnscrewing motor circuitEjector gate cutting circuitEjector plate return confirmation circuitInjection speed:10 Steps controlInjection speed slope controlFoaming molding controlSkin adhesion molding controlD.I.C. (Dual Integrated Control) with Yushin RobotHopper stageCooling water failure warningLeveling pad for installationRotary warning lightExport specificationDesignated color
●For details of each option, confirm in the specifications for the options.
Electric Servo DriveInjection Molding Machine
Note 6.
Note 7.Note 8.Note 9.
Note 10.
The external memory is capable of storing conditions for 1,000 molds.Prepare commercial USB data storage media.The printer and printer cables are options.Temperature sensors and electric wiring are not included.Maximum of 16 items and alarms can be selected out of the following monitor items.①Cycle time ②Injection time ③Metering time ④Cushion position ⑤Holding pressure end position ⑥Injection pressure ⑦Holding pressure transfer pressure ⑧Screw back pressure ⑨Metering end position ⑩Injection start position ⑪Holding pressure transfer position ⑫Mold open time ⑬Mold close time ⑭Metering torque ⑮Holding pressure transfer speed ⑯Mold inner pressure (option)⑰Clamp force ⑱Shift amount (HAVC) ⑲End speed (HAVC)Indicates inspection times and items.
Note 7.
Note 8.
Note 9.
Note 10.Note 11.
Note 12.
Regarding the other languages, contact us separately.English and Chinese are equipped as standard.The LINK10 has actual data collection, molding condition control and remote control functions.The NET100 has quality control and production control function in addition to the functions that the LINK10 has.May not be applicable depending on the model.Regarding the export specifications, separate discussion is needed in some cases, depending upon the export destination.Designate colors, referring to color samples or Munsell codes.
Injection/Holding pressure :1~6 Steps(Variable)Metering/Back pressure :1~3 Steps(Variable)
Step modeSlope mode
Mold open/close : 4 Steps(Fixed)Ejector : 1~3 Steps(Variable)1~3 Steps(Variable)
A -modeB -modeCompression : 1~6 Steps(Variable)
Screw rotation during mold open/closeEject during mold openInjection during clamp upOperator side step safety matUnder mold area safety mat
Note1
Note2
Note3
Note4
Note5
Screw & Barrel for high plasticizationScrew & Barrel for optical applicationHigh dispersion screwHigh viscosity resin screwLong-fiber resin screwSpecial screw Note1
Note2
Note3
Note3
Note4
Note5
Note6
Note7
Note8
Note9
Note10
Note11
Note12
Note 1.
Note 2.Note 3.
Note 4.Note 5.
GP21 screw for Injection unit 1400H.High-Melter MIII screw for Injection unit 2300H and higher.Manual operation type for Injection unit 1400H.Injection unit 1400H is controlled by SSR (non-contact).Injection unit 2300H and higher are controlled by MC (contact).Equipped as standard for J650AD and higher, optional for J550AD.Safety mat on the top of the step is equipped as standard for J650AD and higher, optional for J550AD.Safety mat on the top of the inter-platens bed is equipped as standard for J850ADW and higher (models with 1200mm or wider gap between tie-bars), optional for J850AD.
Note 1.Note 2.
Note 3Note 4.
Note 5.
Note 6.
Regarding special screws, contact us separately.Enables a long holding time and high holding pressure molding.The injection speed may become lower.For the hydraulic type, a separate hydraulic unit is needed.Safety mat on the top of the step is equipped as standard for J650AD and higher.Safety mat on the top of the inter-platens bed is equipped as standard for J850ADW and higher (models with 1200mm or wider gap between tie-bars).When applied, extended nozzle is required.Note that the usable mold thickness range will change.Equipped as standard for J650AD and higher.
Utilities
■ Total Power Capacity
Note: 1. Total power capacity does not include external outlets. 2. We recommend that the rated interrupting current of the main power supply breaker is more than 25 kA at AC400V/460V.
J550AD
J650AD
J850ADJ850ADW
J1000AD
J1300AD
J1800AD
Machine Model
1400H
2300H
3100H
2300H
3100H
3900H
3100H
3900H
5200H
3100H
3900H
5200H
3900H
5200H
7500H
5200H
7500H
9500H
■ Cooling Water Capacity for Barrel Temperature Control
Injection Unit
1400H
2300H
3100H
3900H
5200H
7500H
9500H
21.19(0.6m3/h)
42.37(1.2m3/h)
56.50(1.6m3/h)
98.9(2.8m3/h)
■Hydraulic Oil Tank Capacity
機 種
J550AD
J650AD
J850AD
J850ADW
J1000AD
J1300AD
J1800AD
7.9
(30L)
Hydraulic Oil Tank Capacity(USgal)
Note:The above figures do not include the required quantity of water for the mold temperature controller.
Total Power Capacity(kVA)
53.5
58.3
68.6
59.9
70.2
84.9
70.4
85.1
88.1
71.2
85.9
88.9
86.3
89.2
96.7
90.6
98.1
150.9
Electric Servo DriveInjection Molding Machine
Cooling Water Capacity for Barrel Temperature Control(ft3/h)