EN ISO 9001:2015 Management system as per Evidence of conformity with the above standard(s) has been furnished and is certified in accordance with TÜV PROFICERT procedures for Certificate registration No. 73 100 4782 Audit report No. 4367 3999 First certification 2014-04-05 Certificate valid from 2020-04-05 to 2023-04-04 scope: PAGE 1 OF 1. This certification was conducted in accordance with the TÜV PROFiCERT auditing and certification procedures and is subject to regular surveillance audits. Verifiable under www.proficert.com. Original certificates contain a glued on hologram. TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331 Rev-GB-1711 Darmstadt, 2020-04-01 Certification body of TÜV Hessen – Head of Certification body – D-ZM-14137-01-00 Design and manufacture of dies for aluminium extrusion, tooling and ancillary machineries. Scope: 18G02 (EA: 17/2) CO.M.P.ES. S.p.A. Via Castegnato, 6/C I - 25050 Rodengo Saiano (BS)

EIIAE - CO.M.P.ESEIIAE EN ISO 9001:2015 Management system as per Evidence of conformity with the above standard(s) has been furnished and is certified in accordance with TÜV PROFICERT

Download PDF Report

Upload
others
View
1
Download
0

Embed Size (px)

Citation preview

CER TIFICATEEN ISO 9001:2015

Management system as per

Evidence of conformity with the above standard(s) has been furnished and is certified in accordance with TÜV PROFICERT procedures for

Certificate registration No. 73 100 4782

Audit report No. 4367 3999 First certification 2014-04-05

Certificate valid from 2020-04-05 to 2023-04-04

scope:

PAGE 1 OF 1. This certification was conducted in accordance with the TÜV PROFiCERT auditing and certification procedures and is subject to

regular surveillance audits. Verifiable under www.proficert.com. Original certificates contain a glued on hologram.TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331 Rev-GB-1711

Darmstadt, 2020-04-01 Certification body of TÜV Hessen

– Head of Certification body –D-ZM-14137-01-00

Design and manufacture of dies for aluminium extrusion, tooling and ancillary machineries.

Scope: 18G02 (EA: 17/2)

CO.M.P.ES. S.p.A.Via Castegnato, 6/C

I - 25050 Rodengo Saiano (BS)

Page 2: EIIAE - CO.M.P.ESEIIAE EN ISO 9001:2015 Management system as per Evidence of conformity with the above standard(s) has been furnished and is certified in accordance with TÜV PROFICERT

CER TIFICATOEN ISO 9001:2015

per il sistema di gestione secondo

La prova della conformità alla norma sopra indicata è stata fornita e viene documentata secondo le procedure TÜV PROFICERT per

No registrazione certificato 73 100 4782

Rapporto di Audit 4367 3999 Prima certificazione 2014-04-05

Certificato valido da 2020-04-05 a 2023-04-04

Campo di applicazione:

PAGINA 1 DI 1Questa certificazione è stata eseguita secondo la procedura TÜV PROFiCERT per verifiche e certificazioni e viene periodicamente sorvegliata.

Verificabile sul sito www.proficert.com. I certificati originali contengono un ologramma incollato.TÜV Technische Überwachung Hessen GmbH, Robert-Bosch-Straße 16, D-64293 Darmstadt, Tel. +49 6151/600331 Rev-IT-1711

Darmstadt, 2020-04-01 Organismo di Certificazione del TÜV Hessen

– Responsabile della certificazione –D-ZM-14137-01-00

CO.M.P.ES. S.p.A.Via Castegnato, 6/C

I - 25050 Rodengo Saiano (BS)

Progettazione e costruzione di matrici per l’estrusione di alluminio, attrezzature e macchinari di supporto.

Scopo: 18G02 (EA: 17/2)