Upload
samy175
View
213
Download
0
Embed Size (px)
Citation preview
7/28/2019 EG Lesson Plan 2013-14
1/4
CMS COLLEGE OF ENGINEERING
Namakkal
MECHANICAL ENGINEERINGLESSON PLANNING SHEET
Subject Code
Name ofthe
Subject
Sem
Name ofFaculty
No.Studen
ts
Time Effective Date:23/08/20
12
L T P
GE2111ENGINEERING
GRAPHICSI 48 2 3 0
Revision No.03
Prepared By:
Mr.M.SADHASIVAM Lect/Mech
Approved By:
Mr.M.Muthukumaran Prof & Head/Mech
HourNo
Lesson /Topic Covered
Text &Ref.
BookCode
Methodology
UNIT - I PLANE CURVES AND FREE HAND SKETCHING1 Introduction of the drawings R1,R2,R3 Teaching Aid & Notes
2 Concepts and conventions R1,R2,R3 Teaching Aid & Notes
3 Importance of graphics in engineering applications R1,R2,R3 Teaching Aid & Notes
4
Use of drafting instruments, BIS conventions and
specifications ,Size, layout and folding of drawing sheets,
Lettering and dimensioning.
R1,R2,R3 Notes
5Introduction of Conics & Construction of ellipse, by eccentricity
methodR1,R2,R3 Teaching Aid & Notes
6 Construction of Parabola by eccentricity method R1,R2,R3 Teaching Aid & Notes
7 Construction of hyperbola by eccentricity method R1,R2,R3 Teaching Aid & Notes
8 Construction of ellipse, excise problems solved R1,R2,R3 Teaching Aid & Notes
9Construction of ellipse, Parabola and hyperbola excise
problems solvedR1,R2,R3 Notes
10 Construction of cycloid and involutes of squad and circle R1,R2,R3 Notes
11Introduction and Representation of Three Dimensional objects
& principles of orthographic projectionR1,R2,R3 Teaching Aid & Notes
12 First angle Projection and layout views R1,R2,R3 Teaching Aid & Notes
13Developing visualization skills through free hand
sketching of multiple views from pictorial views of objectsR1,R2,R3 Notes
14 Excise problems solved from free hand sketching R1,R2,R3 Notes
15 Need for importance of multiple views and their placement R1,R2,R3 Notes
UNIT II PROJECTION OF POINTS, LINES AND PLANE SURFACES
16 Introduction of points and straight lines R1,R2,R3 Teaching Aid & Notes
17Projection of points and straight lines located in the first
quadrantR1,R2,R3 Teaching Aid & Notes
18 Determination of true lengths and true inclinations R1,R2,R3 Notes
19 Introduction of midpoint method R1,R2,R3Teaching Aid & Notes
20 Midpoint problems solved R1,R2,R3 Teaching Aid & Notes
21 Determination of apparent angle R1,R2,R3 Notes
22 Introduction of plane surfaces and its types R1,R2,R3 Teaching Aid & Notes
23 Types of plane surfaces and its applications R1,R2,R3 Notes
24 Projection of polygonal surface R1,R2,R3Notes
7/28/2019 EG Lesson Plan 2013-14
2/4
HourNo
Lesson /Topic Covered
Text &Ref.
BookCode
Methodology
25Introduction of edges and corners resting in the reference
planeR1,R2,R3
Teaching Aid & Notes
26Projection of circular lamina inclined to any one of the
reference planeR1,R2,R3
Teaching Aid & Notes
27 Projection of circular lamina inclined to both reference planes R1,R2,R3 Teaching Aid & Notes
28 Hexagonal and pentagonal Prisms and pyramids R1,R2,R3 Notes
29 Excise problems solved from projection of points and lines R1,R2,R3 Notes
30Excise problems solved from projection of prisms and
pyramids
R1,R2,R3 Notes
UNIT III PROJECTION OF SOLIDS
31 Introduction of solids R1,R2 Teaching Aid & Notes
32 Types of solids and its applicationsR1,R2
Teaching Aid & Notes
33 Introduction of projection of simple solidsR1,R2
Teaching Aid & Notes
34 Comparison of planes and solidsR1,R2
Teaching Aid & Notes
35 Introduction of change of position methodR1,R2
Notes
36Projection of Hexagonal, square prisms, inclined to one
reference planeR1,R2 Teaching Aid & Notes
37Projection of Hexagonal, square prisms, inclined to one
reference planeR1,R2 Notes
38Projection of pentagonal, triangle prisms, inclined to one
reference planeR1,R2 Teaching Aid & Notes
39Projection of pentagonal, triangle prisms, inclined to one
reference planeR1,R2 Notes
40Projection of hexagonal pyramids inclined to one reference
planeR1,R2 Teaching Aid & Notes
41Projection of pentagonal pyramids inclined to one reference
planeR1,R2 Notes
42 Projection of square pyramids inclined to one reference plane R1,R2 Notes
43Projection of cylinder and cone when the axis is inclined to one
reference planeR1,R2 Notes
44 Projection of freely suspended cone R1,R2 Teaching Aid & Notes
45University problems solved from projection of prisms and
pyramidsR1,R2 Teaching Aid & Notes
UNIT IV SECTION OF SOLIDS AND DEVELOPMENT OF SURFACES
46 Introduction the section of solids R2,R4 Teaching Aid & Notes
47 Sectioning of simple solids R2,R4 Teaching Aid & Notes
48 Sectioning of square & rectangular prisms R2,R4 Notes
49
Sectioning of Hexagonal & Pentagonal Prisms by cutting
planes inclined to one reference plane and perpendicular to
the other
R2,R4 Notes
50Sectioning of Hexagonal pyramids by cutting planes inclined to
one reference plane and perpendicular to the otherR2,R4 Teaching Aid & Notes
51Sectioning of Pentagonal pyramids by cutting planes inclined
to one reference plane and perpendicular to the otherR2,R4 Teaching Aid & Notes
7/28/2019 EG Lesson Plan 2013-14
3/4
HourNo
Lesson /Topic Covered
Text &Ref.
BookCode
Methodology
52 Sectioning of cylinder inclined to one reference plane R2,R4 Notes
53 Sectioning of cone inclined to one reference plane R2,R4 Teaching Aid & Notes
54 Introduction of development of surfaces R2,R4 Notes
55 Introduction of Truncated and frustum of solids R2,R4 Teaching Aid & Notes
56
Development of lateral surfaces of simple and truncated solids
like prisms, pyramids, cone & cylinder R2,R4 Teaching Aid & Notes
57 Development of lateral surfaces of cylinder R2,R4 Notes
58 Development of lateral surfaces of cone R1,R2 Notes
59 Development of lateral surfaces of prisms R1,R2 Notes
60 Development of lateral surfaces of pyramids R1,R2 Notes
UNIT V ISOMETRIC AND PERSPECTIVE PROJECTIONS
61 Introduction of isometric projection R2,R3 Teaching Aid & Notes
62 Principles of isometric projection R2,R3 Teaching Aid & Notes
63 Isometric scale R2,R3 Teaching Aid & Notes
64 Isometric projections of simple solids R2,R3 Teaching Aid & Notes
65 Isometric projections of truncated prisms R2,R3 Teaching Aid & Notes
66 Isometric projections of truncated pyramids R2,R3 Teaching Aid & Notes67 Isometric projections of truncated cylinders R2,R3 Teaching Aid & Notes
68 Isometric projections of truncated cones R2,R3 Teaching Aid & Notes
69 Introduction of Perspective projection & visual ray method R2,R3 Notes
70Perspective projection of prisms like hexagonal & pentagonal
by visual ray method
R2,R3Teaching Aid & Notes
71Perspective projection of square and rectangle by visual ray
method
R2,R3Teaching Aid & Notes
72Perspective projection of hexagonal & pentagonal pyramids by
visual ray method
R2,R3Teaching Aid & Notes
73 Perspective projection of cylinders by visual ray method R2,R3 Notes
74 Revision of first three units R2,R3 Teaching Aid
75 Revision of last two units R2,R3 Teaching Aid
TEXT BOOK:
1. N.D. Bhatt, Engineering Drawing Charotar Publishing House, 46th
Edition,(2003).
REFERENCES:
1. K. V. Natrajan, A text book of Engineering Graphics, Dhanalakshmi Publishers, Chennai (2006).2. M.S. Kumar, Engineering Graphics, D.D. Publications, (2007).3. K. Venugopal & V. Prabhu Raja, Engineering Graphics, New Age International (P) Limited
(2008).4. M.B. Shah and B.C. Rana, Engineering Drawing, Pearson Education (2005).5. K. R. Gopalakrishnana, Engineering Drawing (Vol.I&II), Subhas Publications (1998).6. Dhananjay A.Jolhe, Engineering Drawing with an introduction to AutoCAD Tata McGraw Hill
Publishing Company Limited (2008).7. Basant Agarwal and Agarwal C.M., Engineering Drawing, Tata McGraw Hill Publishing Company
Limited, New Delhi, (2008). 5. Ashok Gupta, Interactive Engineering Mechanics Statics AVirtual Tutor (CDROM), Pearson Education Asia Pvt., Ltd., (2002).
7/28/2019 EG Lesson Plan 2013-14
4/4