Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Effect of High Temperature Storage on AC Characteristics of
Polymer Tantalum Capacitors
Alexander TeverovskyJacobs Engineering, Inc.
Work performed for EEE Parts, Photonics and Assembly Branch, NASA GSFC, Code 562
NASA Electronic Parts and Packaging (NEPP) Program
List of Acronyms
ETW June 14-17, 2021
AC alternating current ESR equivalent series resistance
C capacitance HT high temperature
CPTC chip polymer tantalum capacitor HTS high temperature storage
DCL direct current leakage TTF time to failure
DF dissipation factor
2
Abstract
ETW June 14-17, 2021
Replacement of MnO2 with conductive polymers as cathode materials in chiptantalum capacitors allows for a substantial reduction of the equivalent seriesresistance (ESR), improvement of frequency characteristics, and elimination ofthe possibility of ignition during failures. One of the drawbacks of chip polymertantalum capacitors (CPTCs) is a relatively poor long-term stability at hightemperatures. In this work, variations of capacitance, dissipation factor, and ESRin different types of capacitors including automotive grade parts from threemanufacturers have been monitored during storage at temperatures from 100 ºCto 175 ºC for up to 18,000 hours. Results show that ESR is the most andcapacitance the least sensitive parameter to degradation. Times to parametricfailures have been simulated using a Weibull-Arrhenius model that allowed forassessments of activation energies of the degradation and prediction of times tofailure at the use temperature. Degradation of CPTCs was explained by thermo-oxidative processes in conductive polymers that result in exponential increase ofthe resistivity with time of aging. This process starts after a certain incubationperiod that depends on packaging materials and design and corresponds to thetime that is necessary to form delamination between the encapsulating moldingcompound and lead frame. The effectiveness of the existing qualificationprocedures to assure stable operation of CPTCs is discussed.
3
Outline Introduction Experiment Results of HTS testing Sensitivity of AC characteristics
to HTS Specifics of ESR degradation Degradation in different
types of CPTCs Significance of endurance
testing Conclusion
ETW June 14-17, 2021
Ta slugcarbon
polymer
silver epoxy
Polymer Tantalum capacitors
4
Introduction
ETW June 14-17, 2021
Contrary to MnO2 capacitors, AC characteristics in CPTCs can degrade substantially with time at high temperatures.
Currently, high-quality CPTCs (auto) require HTS testing at 125 ºC for 1000 hours with relaxed post-testing limits: ESR ≤ (2÷5×ESRinit limit).
There are no requirements for military grade MnO2 tantalum capacitors and in the draft “MIL-PRF-POLY”.
The existing testing does not answer questions about stability of the parts at usage conditions.
There is a need for a model to predict degradation of CPTCs to assess the end-of-life characteristics.
To develop reliability models, different types of CPTCs from three manufacturers have been tested periodically during long-term storage at temperatures from 100 ºC to 175 ºC.
5
Experiment
ETW June 14-17, 2021
Ten types of Mfr.A, four types of Mfr.B, and eight types of Mfr.Ccapacitors have been used in this study.
Five types of the parts were general purpose, 10 types were manufactured for the automotive industry per AEC-Q200 requirements, and 7 types were hi-rel or COTS+ capacitors.
Each group had 5 to 20 samples in each (typically 10 samples). The parts have been stored at 100 ºC, 125 ºC, 150 ºC, and 175 ºC
for several thousand hours, and their AC characteristics (C, DF, and ESR) were measured periodically.
Failure criteria: C ≤ 0.8×Cnom, DF < DFlimit, ESR > 3×ESRlimit
TTF distributions were approximated with a Weibull-Arrhenius model.
−−=
β
ηttP exp1)(
×= kT
EC aexp0η
6
Examples of Degradation of AC Characteristics for General Purpose CPTCs
ETW June 14-17, 2021
Temperature has a strong effect on the rate of degradation. ESR rises with time, exponentially increasing by 100 and 1000 times. In the general-purpose capacitors a significant degradation might occur already
after 100+ hours of storage at 125 ºC.
0.1
1
10
100
0 2000 4000 6000 8000 10000
DF,
%
time, hr
100C 125C
150C 175C10
100
1000
10000
100000
0 2000 4000 6000 8000 10000
ESR
, moh
m
time, hr
100C 125C 150C 175C
Type B1 10µF 25V
Type A7 10µF 100V
7
Examples of Degradation of AC Characteristics for Automotive Grade CPTCs
ETW June 14-17, 2021
All parts passed the required 1000hr testing at 125ºC. One part type degraded catastrophically after 2000hr. Four out of 5 automotive grade capacitors withstood 5200 hours at 125ºC. Capacitors that were stable at 125 ºC also withstood storage at 150ºC for 4000hr.
0
0.2
0.4
0.6
0.8
1
1.2
1.4
1.6
1.8
0 2000 4000 6000
DF,
%
time, hr
CPTCs 33uF 35V HTS125C
AQU C9X C8D
0
50
100
150
200
250
300
0 2000 4000 6000
ESR
, moh
m
time, hr
CPTCs 33uF 35V HTS125C
AQU
C9X
C8D
1
10
100
1000
10000
0 2000 4000 6000
DF,
%
time, hr
CPTCs 330uF 6.3V HTS125C
AQD
C8D
1
10
100
1000
10000
100000
0 2000 4000 6000
ESR
, moh
m
time, hr
CPTCs 330uF 6.3V HTS125C
AQD
C8D
8
TTF Distributions
ETW June 14-17, 2021
Experimental data follow the Weibull-Arrhenius model. Similar slopes indicate same mechanism of degradation. The model allows for prediction of the failure inception time, TTFi,
and the probability of failure at operating conditions.
HTS CPTC B1 10uF 25V
time to C failure, hr
cumu
lative
prob
abilit
y, %
1.E+1 1.E+71.E+2 1.E+3 1.E+4 1.E+5 1.E+61
5
10
50
90
99
x 8
use level
55C
100C125C
150C175C
HTS CPTC B1 10uF 25V
time to ESR failure, hr
cumu
lative
prob
abilit
y, %
1.E+1 1.E+71.E+2 1.E+3 1.E+4 1.E+5 1.E+61
5
10
50
90
99
use level
55C
100C125C
150C175C
Examples of TTF distributions for C and ESR during HTS at different temperatures
32yr 8yr
9
Sensitivity of AC Characteristics to Aging
ETW June 14-17, 2021
For most tested capacitors TTFC and TTFDF values were substantially greater than TTFESR.
Similar slopes of distributions indicate the same mechanism of failures.On average, the times for capacitance failures (TTFC) are ~3.5 and for DF
failures (TTFDF) ~2 times greater than for ESR (TTFESR).
Comparison of TTF distributions for C, DF, and ESR at the use temperature
Part A2 A3 A6 C2 B1 B2 B4
RC 1.5 2.9 2.1 5.9 4.4 3.6 3.9
RDF 1.4 3.4 1.7 1.6 2.2 2.6 1.2
Ratios of median times RC = TTFC/TTFESR and RDF = TTFDF/TTFESR
CPTC B1 at 55C
time to failure, hr
cumu
lative
prob
abilit
y, %
1.E+4 1.E+71.E+5 1.E+61
5
10
50
90
99
ESR
DFC
10
Degradation in Different Part Types
ETW June 14-17, 2021
The slopes of distributions β >1 indicate wear-out failures. Calculated TTF50 values at operating conditions vary from a few to 471 years, and times to the failure inception (TTF1%) are from one to 88 years.Ea is varying in a wide range, from 0.38 to 0.93 eV. The average value is 0.62 ±0.17 eV.Some automotive industry CTPCs showed exceptional results during HTS; however, variations between part types might be significant.The standard HTS testing is not sufficient to assure long-term stability of AC characteristics at HT.
Part type Qual. level β Ea
eV
TTF50use, yr.
TTF1%use,yr.
TTF50125C,
khr
P1251000hr
, %A1 10-35 COTS+ 2.09 0.48 7.6 1.0 3.4 5.3A2 10-35 COTS+ 3.47 0.46 6.2 1.8 3.1 1.3A3 15-25 COTS+ 2.49 0.45 5.4 1.0 2.9 4.5A4 15-25 COTS+ 4.43 0.38 3.9 1.5 3.1 0.4
A5 100-10 auto 10.2 0.43 4.8 3.2 2.8 0.002A6 10-35 auto 3.31 0.53 33.2 2.9 3.4 1.2
A7 10-100 general 2.69 0.93 29.0 6.0 0.5 76.2A8 47-16 general 2.15 0.64 32.3 4.5 >2 2A9 33-35 auto - - >66* >21* >13* <0.005A10 330-6 auto 6.6 0.61 16 10.2 3.2 0.01B1 10-25 general 2.9 0.77 33.8 7.9 1.5 4.86
B2 220-10 general 6.8 0.71 33.3 17.9 3.5 0.01B3 22-25 general 4 0.52 55.0 19.1 14 0.01
B4 220-16 COTS+ 3.39 0.52 19.2 5.5 6.5 0.11C1 33-35 COTS+ 2.51 0.89 471.0 88.0 6.7 0.07C2 33-35 auto 3.11 0.75 76.4 19.5 6.1 0.22C3 330-6 auto 1.15 0.76 71.9 1.8 4.9 9.0C4 330-6 COTS+ 1.65 0.77 73.7 5.7 5.9 4.5C5 33-25 auto 2.58 0.57 12.6 2.4 >2 0.03C6 33-35 auto - - >66* >21* >13* <0.005C7 33-35 auto - - >66* >21* >13* <0.005C8 330-6 auto - - >66* >21* >13* <0.005
* Calculated at β = 3.5 and Ea = 0.62 eV11
Specifics of ESR Degradation
ETW June 14-17, 2021
There is a certain incubation period, ti, before the inception of ESR growth. After ti, ESR increases exponentially with time. Both, incubation periods and characteristic times of degradation are
decreasing with temperature. Degradation of ESR in CPTCs is due to thermo-oxidative processes in
conductive polymers. Permeability of air depends on packaging quality that affects the rate of ESR
degradation and times-to failure.
HTS of B2 220 µF 10 V capacitors
1.E+0
1.E+1
1.E+2
1.E+3
1.E+4
0 2000 4000 6000 8000 10000 12000
ESR
, moh
m
time, hr
HTS CPTC B2
100C
125C
1.E+0
1.E+1
1.E+2
1.E+3
1.E+4
0 500 1000 1500 2000ES
R, m
ohm
time, hr
HTS CPTC B2
150C
175C
HTS CPTC B2
time to ESR failure, hr
cumu
lative
prob
abilit
y, %
100 10000001000 10000 1000001
5
10
50
90
99
use level55C
100C125C
150C175C
12
Failure Analysis
ETW June 14-17, 2021 13
Cracks and LF/MC delamination provide a path for oxygen penetration to the slug and accelerate degradation processes substantially.
X-sectioning after HTS shows discoloration of MC that indicates the path of oxygen towards PEDOT:PSS cathode.
More discoloration around the slug corresponds to greater degradation of ESR.
Parts with cracks
Extrusion of polymer due to moisture sorption
Parts with delamination
FA: Degradation of Capacitance and DF
ETW June 14-17, 2021
Reduction of the roll-off frequency and degradation of capacitance is due to increase of the resistance of cathode layers.
Degradation of DF is mostly due to increasing ESR values.
0
2
4
6
8
10
12
1.E+01 1.E+02 1.E+03 1.E+04 1.E+05
capa
cita
nce,
uF
frequency, Hz
HTS at 150C
0.01
0.1
1
10
100
1.E+01 1.E+02 1.E+03 1.E+04 1.E+05 1.E+06
ESR
, ohm
frequency, Hz
HTS at 150C
Frequency dependencies of C and ESR for 10 µF CPTC during HTS at 150 ºC. DF = ωC×ESR
initial
initial
14
FA: Ag Compositions
ETW June 14-17, 2021 15
Examples of Ag-containing crystals on silver epoxy in virgin and post-HTS capacitors. Ag-containing
crystals were formed at the Ag-epoxy and PEDOT interface in the presence of water. Similar crystals might be formed after moisture sorption in cracks caused by HTS. Due to a small size, these crystals most likely will burn-out after voltage applications and are unlikely to cause catastrophic failures.
FA: Sulfur Compositions
ETW June 14-17, 2021 16
Compositions formed on 6.3V in-situ polymerization cathode layers
S
The surface of PEDOT:PSS is chemically active and can form different types of S-containing compositions in the presence of moisture.
FA: Ca Compositions
ETW June 14-17, 2021 17
Ca most likely originates from the fabrication process of PEDOT:PSS and crystals are growing in the presence of moisture.
Calcium sulfate (CaSO4) crystals are formed in the presence of moisture.
FA: Liquids in Cathode Layers
ETW June 14-17, 2021 18
Liquid polymer oozed from the cathode shell after cross-sectioning for virgin and post-HTS capacitors
The liquid is likely a polymer solution in water formed during cross sectioning.HTS does not remove soluble polymers. Drying of the solution formed a thin and fragile layer on the surface of the shell. The presence of the soluble polymers is most likely not a reliability concern.
The Significance of 125ºC/1000hr Testing
ETW June 14-17, 2021 19
Successful results of HTS at 125 ºC can guarantee stability of ESR during operations at relatively large activation energy of degradation only.
Increasing Ea from 0.6 eV that is typical for in-air conditions even to 1 eV in vacuum for capacitors that are stable at 125 °C for 1000 hours would increase their operational life in space at 65 °C from 2 years to more than 20 years.
Possible presence of defects (cracks) in the case requires relatively large SS.
Testing 77 samples with no failures can assure that the probability of defect is below 1.5%.
Ea for thermal degradation of polymers in vacuum is substantially greater than in the presence of oxygen.
Experimental data suggest a better stability of ESR in vacuum.
0
1
10
100
45 55 65 75 85 95 105
time,
yea
r
temperature, deg.C
1.2 eV 1 eV0.8 eV 0.6 eV0.4 eV
Time of storage that is equivalent to 1000 hr at 125 ºC varies substantially
with activation energy
Conclusion
ETW June 14-17, 2021
Testing of 22 types of polymer tantalum capacitors during HTS at temperatures from 100 to 175 ºC showed that ESR is the most sensitive parameter to degradation that can increase dozens and thousands times.
Times to C and DF failures are on average 3.5 and 2 times greater than for ESR. A decrease of capacitance and increase of DF are results of ESR degradation caused by thermo-oxidative processes in conductive polymers.
Degradation of AC characteristics has been described using Weibull-Arrhenius models. The slopes of TTF distributions indicate wear-out mechanisms of failure. Activation energies of the degradation process depend on the part type and vary in a wide range, from 0.38 to 0.93 eV. On average, Ea = 0.62 ± 0.17 eV.
Successful results of qualification testing at 125 ºC for 1000 hours can guarantee stability of parts at operating conditions only for lots with relatively high activation energies that is typical for space applications.
All tested automotive grade CPTCs can withstand more than 1000 hours at 125 ºC and 4 types remained stable for 4000 hours at 150 ºC. Automotive grade polymer capacitors should be the prime source for selecting components for space applications.
20