E000IES0_01SUM_C

8/3/2019 E000IES0_01SUM_C

1/63

Alenia Marconi Systems UNCLASSIFIED E000IES0-01SUM

Issue C

Date: 16/10/2002

SOFTWARE USER MANUAL

INTERFACE EDITOR SYSTEM

Administrator Manual

ISSUED BY:

Alenia Marconi Systems S.p.A.Via Tiburtina Km 12.400 - Roma

ITALY

The copyright in this document is the property ofAlenia

Marconi Systems S.p.A. The document is supplied on the

express understanding that it is to be treated as confidential

and that it may not be copied, used or disclosed to others in

whole or in part for any purpose except as authorised in

writing by Alenia Marconi Systems S.p.A.

E000IES0_01SUM_C.DOCUNCLASSIFIED Page i

8/3/2019 E000IES0_01SUM_C

2/63


Issue C

Date: 16/10/2002

DOCUMENT SECURITY CLASSIFICATION:

This document is intended for the use of the recipient only, and for communication to such persons as may be

required to be acquainted with its contents in the course of their duties.

The recipient, and any other person to whom the recipient has communicated the contents of this document,shall treat this document in accordance with the requirements of Alenia document Security Instructions ,15 February 1992.

Any person others the authorised holder upon obtaining possession of this document, by finding or otherwise,should forward it by registered post, together with his name and address, in a sealed envelope to:

Ufficio SicurezzaAlenia Marconi Systems S.p.A.Via Tiburtina 12.40000131 Roma

ITALY

Any questions arising from this document should be addressed to:

Luciano CAMINITIAlenia Marconi Systems S.p.A.Air Traffic Management & Airports SystemsATM SoftwareVia Tiburtina, Km 12.400 - 00131 RomaITALY

Telephone +39-06 4150-3327

Fax +39-06 4131133 / 4131436 / 4131091

E000IES0_01SUM_C.DOCUNCLASSIFIED Page ii

8/3/2019 E000IES0_01SUM_C

3/63


Issue C

Date: 16/10/2002

This document contains a total of 63 pages1

consisting of 7 pages of front matter and 56

pages of text and figures

Issue Authority

Prepared by :(Software Team Leader)

......................................................(Luciano CAMINITI)

Date: 16/10/2002

Approved by:(Software Product Manager)

......................................................(Luciano CAMINITI)

Date:

Checked by:(SQAR )

......................................................( )

Date:

1The Total of Pages includes the Distribution List page. This page is located at the end of document and may be missing in external

distribution document.

E000IES0_01SUM_C.DOCUNCLASSIFIED Page iii

8/3/2019 E000IES0_01SUM_C

4/63


Issue C

Date: 16/10/2002

AMENDMENT RECORD SHEET

To record the incorporation of an amendment list in this publication, sign against the appropriate AL No and

insert the date of incorporation.

AL No Amended by Date AL No Amended by Date

1 25

2 26

3 27

4 28

5 29

6 307 31

8 32

9 33

10 34

11 35

12 36

13 37

14 38

15 3916 40

17 41

18 42

19 43

20 44

21 45

22 46

23 47

24 48

E000IES0_01SUM_C.DOCUNCLASSIFIED Page iv

8/3/2019 E000IES0_01SUM_C

5/63


Issue C

Date: 16/10/2002

REVISIONS RECORD SHEET

This sheet is a record of revisions to this document.

Issue/AL Date Revised Pages Document Change Note

(DCN)

A 28/10/1999 - First Issue

B 14/11/2000 Modified par 3.1 - 3.2 , Updated X-term traces First Revision

C 16/10/2002 All Second Revision

E000IES0_01SUM_C.DOCUNCLASSIFIED Page v

8/3/2019 E000IES0_01SUM_C

6/63


Issue C

Date: 16/10/2002

INTERFACE EDITOR SYSTEM

ADMINISTRATOR MANUAL

E000IES0_01SUM_C.DOCUNCLASSIFIED Page vi

8/3/2019 E000IES0_01SUM_C

7/63


Issue C

Date: 16/10/2002

1 SCOPE .............................................................................................................................1

1.1 IDENTIFICATION ........................................................... .............................................................. .....11.2 SYSTEM OVERVIEW.........................................................................................................................11.3 DOCUMENT OVERVIEW ........................................................ ......................................................... 2

2 REFERENCED DOCUMENT ......................................................................................3

3 INTERFACE EDITOR SYSTEM INSTALLATION AND CHECKPROCEDURE...........................................................................................................................4

3.1 CREATING THE INSTALLATION KIT..........................................................................................43.2 INSTALLING THE IES ENVIRONMENT ON THE TARGET COMPUTER............................. 8

4 SESSIONS TRACES ....................................................................................................104.1 CREA_IES.SH COMMAND TRACE : TRACE 1 ...................................................................... ....104.2 RUNNING THE IES : TRACE 2 ............................................................. ......................................... 134.3 COMPILING DATA-SETS : TRACE 3 ............................................................... ............................154.4 RUNNING THE HCI APPLICATION WITH A LOCAL PLAYBACK : TRACE 4 ..................224.5 USING THE INTERFACE EDITOR SYSTEM - WIDGET FACILITY : TRACE 5 .................244.6 USING THE INTERFACE EDITOR SYSTEM - TABULAR FACILITY : TRACE 6...............304.7 USING THE INTERFACE EDITOR SYSTEM - CONTACT FACILITY : TRACE 7 ..............374.8 USING THE INTERFACE EDITOR SYSTEM - GSL FACILITY : TRACE 8 ..........................444.9 AUTOMATIC BACKUP ............................................................... .................................................... 48

5 INSTALLING THE FINAL COMPILED DATA-SETS ON THE ON-LINE

TARGET ENVIRONMENT .................................................................................................495.1 WHAT MUST BE KNOWN BEFORE.............................................................................................495.2 INSTALLATION STEPS...................................................................................................................49

6 APPENDIX ....................................................................................................................516.1 SYNTHETIC CHECK PROCEDURE ................................................................ ............................51

E000IES0_01SUM_C.DOCUNCLASSIFIED Page vii

8/3/2019 E000IES0_01SUM_C

8/63


Issue C

Date: 16/10/2002

1 SCOPE

This User Manual describes on high-level the Interface Editor System (I.E.S.) and single interactiveeditors of the Alenia Interface Editor System. The document describes especially how to install theInterface Editor System (IES) on a target computer, and how to check the installation. It is primarilyaddressed to software engineers and technicians that need to change the Alenia HCI application layout.

Throughout this manual, we will assume that the reader is familiar with basic software components suchas the UNIX operating system, OSF/Motif and the X Window System.

The IES reads, manages the interactive edit phase, and re-generates syntax files. These ASCII filesdescribe the layout of each desired component. They must be re-parsed to generate resource files for theapplication and the base graphic library.

1.1 IDENTIFICATION

This document contains the Software User Manual (SUM) for the Computer Software Configuration Item(CSCI) identified as IES (Interface Editor System).

The following ones are the CSCI identification data:System Identification Number: Not ApplicableSystem Title: AMS Air Traffic Control Automatic SystemSystem Abbreviation: SATCASCSCI Identification Number: E000IES0

CSCI Title: Interface Editor SystemAbbreviation: IES

1.2 SYSTEM OVERVIEW

This document represents the Software User Manual of the Interface Editor System. The IES CSCI isunique for all systems, that is not specifically developed and/or customised for a specific system.

E000IES0_01SUM_C.DOCUNCLASSIFIED Page 1

8/3/2019 E000IES0_01SUM_C

9/63


Issue C

Date: 16/10/2002

1.3 DOCUMENT OVERVIEW

This document describes how to install the IES on a target computer, and how to verify that theinstallation has been correctly realised.

The check procedures shows how is possible to configure objects using the Interface Editor System tools.At the end of the document there are an Appendix with a syntax check procedure.

This document is organised in the following sections:

Section 1: ScopeIt defines the scope of the document, including both a high level overview of the CSCI anda description of the document structure.

Section 2: Referenced DocumentsIt provides a list of the documents referenced in this document.

Section 3: Installation And Check ProcedureIt explains how to create, install and check the IES installation kit.

Section 4: Sessions TracesIt describes all the shell terminal traces of main IES procedures.

Section 5: Installing The Final Compiled Data-Sets On The On-Line Target Environment

It describes how to install the Final Compiled Data-Sets on a target hci system.

Section 6: AppendixIt provides readers a short summary of steps used for the installation check.


8/3/2019 E000IES0_01SUM_C

10/63


Issue C

Date: 16/10/2002

2 REFERENCED DOCUMENT

Standards:

This document organization does not observe a specific standard.

Procedures:

[PR-1] PPA-D-01 rev. A AMS - Processo Software 2 giugno 1999.

[PR-2] MAM-Q-01 AMS Manuale per la Qualit.

[PR-3] PPA-D-05 rev. A AMS Gestione della Configurazione del Prodotto Software.

Specifications:

[1] . Software User Manual For The Controller Working Position - Open System Feb. 1999.

[2] . X Window System Digital Press Third Edition.

[3] . Xlib Programming Manual The defenitive Guides to the X Window System OReilly &Associates, Inc. Third Edition.

[4] . Xlib Reference Manual The defenitive Guides to the X Window System OReilly &Associates, Inc. Third Edition.


8/3/2019 E000IES0_01SUM_C

11/63

8/3/2019 E000IES0_01SUM_C

12/63


Issue C

Date: 16/10/2002

ies

SystemName

tools

lib

files

bdf.d

bin

Xmg.d

util

source

runtime

PRJ

bin

csci

ddl

include

Contains HCI tools executable files

Contains configuration syntax generalfiles

Contains shell and header files

Contains graphic library defaultconfiguration files

Contains bitmap and customised fonteditor executable and resource files

Contains IES tools executable files

Contains XMG executable and

resource filesContains a README andcompress/uncompress utilities

Contains configuration syntaxmodified files

Contains modified header system filesContains final data-set system filesand HCI executable

Contains map projects for XMG tool

IESDirectory


8/3/2019 E000IES0_01SUM_C

13/63


Issue C

Date: 16/10/2002

If is necessary to use a secondary site system directory in the kit (for instance the CDS2000 and the CDS1000versions), you can use the following command :

> "crea_ies_double.sh"This command starts, like the previous one, the tool used to create and set the IES directories. The toolwill ask you the following questions:

1. Control configuration path for the interface editor system tmp or new.2. System name: root directory (name) containing the site system customisations.3. Request for a secondary site system (Y/N)4. Secondary System name: root directory (name) containing the secondary site system customisations

(only if the reply to previous step (3) is affirmative).5. IES directory: root directory (name) containing the whole installation kit.6. Library HCI version: HCI process (csci) release number.7. Library XDI version: XDI process (csci) release number.

8. DIGITAL Unix O.S. Version.9. License file : complete path of the delivery "license" file (as default () searches the license.datfile in the path).

Using this information, the command "crea_ies_double.sh" will create the IES directories as follows:


8/3/2019 E000IES0_01SUM_C

14/63


Issue C


Date: 16/10/2002

ies

SystemName

2SystemName

tools

lib

files

bdf.d

bin

Xmg.d

util

source

runtime

PRJ

source

runtime

bin

csci

ddl

include

ddl

include

Contains HCI tools executable files

Contains configuration syntax generalfiles

Contains shell and header files

Contains graphic library defaultconfiguration files

Contains bitmap and customised font

editor executable and resource files

Contains IES tools executable files

Contains XMG executable andresource filesContains a README andcompress/uncompress utilities

Contains configuration syntaxmodified files

Contains modified header system filesContains final data-set system filesand HCI executable

Contains map projects for XMG tool

IESDirectory

8/3/2019 E000IES0_01SUM_C

15/63


Issue C

Date: 16/10/2002

The output of the interactive session is a tar file named .tar (alias ).

Then transfer this archive from the factory main computer to the target one

For a complete message trace of the "crea_ies.sh" command shell please refer to the paragraph 4.1 [TRACE

1].

3.2 INSTALLING THE IES ENVIRONMENT ON THE TARGET COMPUTER

On the target computer digit the following commands:

Load the installation kit from tape device using the command: "tar xvf /dev/"

Now you have a tar format file () in your home directory (i.e. "ies_kit_40b.tar").

To rebuild the whole IES environment (directories tree) of the page 1 image, digit the command:"tar xvf " (i.e. "tar xvf ies_kit_40b.tar"). In this way you will have in the homedirectory a new (i.e. "ies_kit_40b").

From the a compressed file and an installation shell file will be extracted. So applythe command:

.install.sh

Pay attention: you could be required to change the attributes of the file, in order to make it executable(chmod +x

8/3/2019 E000IES0_01SUM_C

16/63


Issue C

Date: 16/10/2002

"chmod +x ~///E*.SH"This command gives all the E*.SH files the execution privileges

"s "This command moves the current working directory to the one (using thiscommand you can change the current directory to the alternative second system, if the kit is createdwith the "crea_ies_double.sh")

"E*SH ies"This command is used to start the IES. The first time the IES starts remember to select the"COMPILE" button on the IES main panel. This action creates dataset files for future use.

"run.sh"This command runs an HCI system emulation session.


8/3/2019 E000IES0_01SUM_C

17/63


Issue C

Date: 16/10/2002

4 SESSIONS TRACES

In the following paragraphs are reported trace extracts of the messages sent on the shell terminal as aconsequence of run commands or during IES using sessions.

4.1 CREA_IES.SH COMMAND TRACE : TRACE 1

Running the command "crea_ies.sh" on a terminal (questions are sub-lined, answers are bold), theinteraction will look like the following:

---

crea_ies.sh

XMGG=/disk11/funfab/fun/tmp/xmg2

XMGG=/disk11/funfab/fun/tmp/xmg2IESG=/disk11/funfab/fun/tmp/ies2


IESG=/disk11/funfab/fun/tmp/ies2

TSEG=/disk11/funfab/fun/tmp/tse2

Insert the new or tmp configuration control path...........: tmp

System (name) to be cloned ....................................: std_cwp_04

IES environment root directory (name), for installation kit ...: IES_KIT_06102000

HCI library version (2..4) (default=4 tmp hci4) ...........:

XDI library version (2..4) (default=4 tmp xdi4) ...........:

Operating system (40D-40B) (default=40D) ......................:

............................ Creating IES_KIT_06102000

... Done.

............................ Copying files from std_cwp_04 to IES_KIT_06102000

...

Enter licence file name with path ...

.... or digit for default (runtime's)..................:

...

................................... Copying Map projects from system/std_cwp_04/PRJ

... Done.

................................... Copying files from system/std_cwp_04/source

... Done.

............................ Copying utility files IES_KIT_06102000

... Done.

............................ Copying libcxx.so, Compress and Uncompress files

............................ Warning libcxx.so only for local O.S.

... Done.


8/3/2019 E000IES0_01SUM_C

18/63


Issue C

Date: 16/10/2002




TPVG=/disk11/funfab/fun/tmp/tpv3XMGG=/disk11/funfab/fun/tmp/xmg2



TPVG=/disk11/funfab/fun/tmp/tpv3

TOOL_PREVIEW=/disk11/funfab/fun/tmp/tpv3/E000TPV0-01RFC40D

TCUG=/disk11/funfab/fun/tmp/tcu3




TPVG=/disk11/funfab/fun/tmp/tpv3

TOOL_PREVIEW=/disk11/funfab/fun/tmp/tpv3/E000TPV0-01RFC40D

LIBRERIA_DSP=/disk3/cwpopen/HCI/HCI4/standard/LIBRERIA_DSP_04_02

....

....

............................ Copying tools executable files

... Done.

............................ Copying .dsp general files

RCS/Action.dsp,v

8/3/2019 E000IES0_01SUM_C

19/63


Issue C

Date: 16/10/2002

... Going To Archive The Deliverable Kit....

a IES_KIT_06102000.zip 49000 Blocks

a IES_KIT_06102000.install.sh 1 Blocks

... I.E.S. Kit 'IES_KIT_06102000.tar' Creation Compleated.

RESULT :

-rw-r--r-- 1 cwpgen users 25098240 Sep 12 15:30 IES_KIT_06102000.tar

---

---


8/3/2019 E000IES0_01SUM_C

20/63


Issue C

Date: 16/10/2002

4.2 RUNNING THE IES : TRACE 2

After the installation procedure has been carried out correctly, you can run the Interface Editor System.The s command is used to locate and go to the path of the HCI site systemdirectory, use the same command if necessary for a secondary site system path.

The interaction will look like the following:

---

> s std_cwp_04

/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04

> ls

E041HCI2.MAKE PRJ run.sh source

E041HCI2.SH hciobj runtime

> setenv DISPLAY BARCO:0.0

> E041HCI2.SH ies

qkg4

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci

ikm0200

ctl1

xdi3

librad1

hci4

TOOL_CURSOR=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_cursor

TOOL_GRP=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin

TOOL_VID=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin

TOOL_GENSET=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_genset

TOOL_ALARM=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/binTOOL_DIALOG=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_dialog

TOOL_GSL=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_gsl

TOOL_WIDGET=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_widget

TOOL_CONTACT=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_contact

TOOL_TABULAR=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_tabular

TOOL_PRE_MUL=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_pre_mult

i_list

TOOL_POST_MUL=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_post_mu

lti_list

TOOL_LIST=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_tabular

TOOL_GENMACRO=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin

TOOL_PREVIEW=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_preview

LIBRERIA_DSP=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib

VERSION_40D

/disk5/funfab/utility/buildp: Command not found.

SYSTEM ==> /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04PARTNER ==> /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04

HCIG ==> /usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci

XDIG ==> /usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci

DEVELOP ==> /disk3/cwpopen/HCI/HCI4

LIBRERIA_DSP ==> /usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib

IES HOME DIR ==> /usr2/ies/IES_KIT/IES_KIT_06102000/ies

X Toolkit Warning: Cannot convert string "-*-Menu-Medium-R-Normal--*-120-*-*-P-*-ISO8859-1"

to type FontStrucT

---


8/3/2019 E000IES0_01SUM_C

21/63

8/3/2019 E000IES0_01SUM_C

22/63


Issue C

Date: 16/10/2002

4.3 COMPILING DATA-SETS : TRACE 3

Click on the "COMPILE" button:

The following messages will scroll on the terminal window:

---

qkg4

ikm0201

ctl1

xdi4

librad2

hci4

TOOL_CURSOR=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_cursor

TOOL_GRP=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin

TOOL_VID=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin

TOOL_GENSET=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_genset

TOOL_ALARM=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_alarmTOOL_DIALOG=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_dialog

TOOL_GSL=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_gsl

TOOL_WIDGET=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_widget

TOOL_CONTACT=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_contact

TOOL_TABULAR=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_tabular

TOOL_PRE_MUL=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_pre_mult

i_list

TOOL_POST_MUL=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_post_mu

lti_list

TOOL_LIST=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_tabular

TOOL_GENMACRO=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin

TOOL_PREVIEW=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_preview

LIBRERIA_DSP=/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib

VERSION_40D

buildp: Command not found.

##################################################

/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl

##################################################

co -q /usr2/ies/IES_KIT/IES_KIT_06102000/ies/lib/RCS/GENERATION_IN_PROGRESS.doc,v

GENERATION_IN_PROGRESS.doc

echo "\n1-st Phase: DATASET REGENERATION ..."

1-st Phase: DATASET REGENERATION ...

drwxr-xr-x 2 ies users 8192 Oct 11 13:42 ../../runtime

co -q /usr2/ies/IES_KIT/IES_KIT_06102000/ies/lib/RCS/gsl.mk,v gsl.mk

co -q /usr2/ies/IES_KIT/IES_KIT_06102000/ies/lib/RCS/xcolor_codes.dsp,v xcolor_codes.dsp

[ compiling gsl ]

**** GSL PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_gsl gsl.dsp

-I. -I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/consegna -I../../source/include-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl

-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib

-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci


-m../../source/ddl/IM_MOTIF_context.tmp

-f../../runtime/font_gsl.ddl -c../../runtime/cursor_gsl.ddl

-b18 -C../../runtime/color_gsl.ddl

-i../../runtime/color_gsl_core.ddl -A../../runtime/color_map.bin

-s../../runtime/style_gsl.ddl -d../../source/include/gsl.h

-Txcolor_codes.dsp -o../../runtime/DEFAULT.PALETTE

-v../../source/ddl/base_colors.tmp

parser started ...

Version 2

parser completed !

**** GSL PARSER COMPLETED ****


8/3/2019 E000IES0_01SUM_C

23/63


Issue C

Date: 16/10/2002

rm -f xcolor_codes.dsp

co -q /usr2/ies/IES_KIT/IES_KIT_06102000/ies/lib/RCS/map_attributes.dsp,v

map_attributes.dsp

[ compiling map attributes ]

**** MAP ATTRIBUTES COMPILING STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_genset

-I../../source/include

-a -s../../source/include/gsl.h

map_attributes.dsp -o../../runtime/map_attributes.bin

**** MAP ATTRIBUTES COMPLETED ****

co -q /usr2/ies/IES_KIT/IES_KIT_06102000/ies/lib/RCS/widget_dsp.mk,v widget_dsp.mk

co -q /usr2/ies/IES_KIT/IES_KIT_06102000/ies/lib/RCS/ExtDefine.h,v ExtDefine.h

[ compiling widget ]

**** WIDGET PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_widget -I.

-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/consegna -I../../source/include

-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl



-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci -e widget.dsp

-s../../runtime/widget.bin || rm -f ../../runtime/widget.bin; mv a.log widget.log

parser started ...

Shell SLDA

Shell TLDA

Shell DRAW_SYM

Shell DRAW_BROK

Shell LOCMAPS_CAT_MENU

Shell DRAW_ARC

Shell DRAW_TEXT

Shell Menu

Shell Menu_Popup

Shell DF_MENU

Shell LOCMAPS_EDIT_MENU

Shell LDAShell SDA

Shell SLC

Shell ORIENT_MENU

Shell MAPS_MENU

Shell ICM_MENU

Shell RRA

Shell GRP

Shell LIST

Shell LIST_NO_SCROLLBAR

Shell LIST_NO_RESIZE

Shell LIST_NO_RESIZE_NSA

Shell PREVIEW

Shell PREVIEW_FIELD

Shell CHOICE

Shell ICON

Shell MUTEShell TRACE_OBJECTS

Shell TRACELIST

Shell WDG_ECHO

Shell WDG

Shell GLOBMAP_MENU

Shell CKM

Shell XEVENT

Shell CDW_LIST

parser completed !

**** WIDGET PARSER COMPLETED ****

rm -f ExtDefine.h

[ compiling grp ]


8/3/2019 E000IES0_01SUM_C

24/63


Issue C

Date: 16/10/2002

**** GRP PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_grp grp.dsp

-h../../source/include/grp_header.h -O../../source/include/cwp2_system_grp.cfg

-G../../source/include/cwp2_imids_grp.cfg -P../../source/include/p_cwp2_grp.cfg

-c../../source/ddl/a_components_p.info -b../../runtime/gsl_base.ddl

-g../../source/include/gsl.h -d0

-S4 -o../../source/ddl/grp.pre;

Start of grp descriptor file parsing .....

input_push di : grp.dsp

..... End of grp descriptor file parsing

End of header file generation

>>>> Only One Background Color Defined: 'MAP_0' For 'GRP_0'.

>>>> Only One Background Color Defined: 'MAP_0' For 'SRP_0'.

>>>> Only One Background Color Defined: 'MAP_0' For 'TRP_0'.

Creating imids file for G.R.P. ... Done

End of cwp2 imids file generation

End of dataset file generation

End of tdl files generation

End of device gsl file generation

**** GRP PARSER COMPLETED ****

**** GENSET ON GRP STARTED ....



-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/

-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci -a

-s/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/grp_configuration.h

../../source/ddl/grp.pre -o../../runtime/grp.bin || rm -f

../../runtime/grp.bin

**** GENSET ON GRP COMPLETED ****

[ compiling tabular ]

**** NEW TABULAR COMPILING STARTED ....

../../source/ddl

cp -f ../../source/ddl/a_components_p.info ../../runtime;

(/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_tabular


-I../../source/ddl -I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl



-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci -r/list_configuration.h

-cF_fldi -C1

-R0

-w15 +W../../runtime/a_components_p.info

-W../../runtime/a_components_p.dat lists.dsp-o../../source/ddl/lists.tdl +a../../runtime/a_attribute_p.info

-a../../runtime/a_attribute_p.dat +x../../runtime/a_attributeapi_p.info

-x../../runtime/a_attributeapi_p.dat +A../../runtime/a_builditemstate_p.info

+b../../runtime/a_bldtabstate_p.info +B../../runtime/a_blddeftabstate_p.info

+V../../runtime/a_tabstate_p.info

-V../../runtime/a_tabstate_p.dat

+v../../runtime/a_itemstate_p.info

-v../../runtime/a_itemstate_p.dat +y../../runtime/a_symbol_p.info

-y../../runtime/a_symbol_p.dat

-b../../source/ddl/tabular_build.info

-S../../source/include/tabular_symbols.h +e../../runtime/a_itemtpl_p.info

+t../../runtime/a_tabletpl_p.info +E../../runtime/a_globitem_p.info

+T../../runtime/a_globtable_p.info

-e../../runtime/a_itemtpl_p.dat -t../../runtime/a_tabletpl_p.dat

-E../../runtime/a_globitem_p.dat -T../../runtime/a_globtable_p.dat

+m../../runtime/item_idx_build.info +M../../runtime/table_idx_build.info

-m../../runtime/a_itemidx_p.dat -M../../runtime/a_tabidx_p.dat


8/3/2019 E000IES0_01SUM_C

25/63


Issue C

Date: 16/10/2002

-f../../runtime/a_tabfield_p.dat +f../../runtime/a_tabfield_p.info;)

Re-Initializing history information...

INITIALIZED

Warning : name grey60 not found...

Warning : name grey45 not found

Warning : name yellow not found

Warning : name cyan1 not found

CSL

parsing TRANSPARENT table SIL SIL_2 MLB LLP GHOST file out :

../../runtime/tabular.bin

parsing CONTAINER table NSA file out : ../../runtime/nsa.bin

parsing CONTAINER table ESB file out : ../../runtime/esb.bin

parsing CONTAINER table COLOR file out : ../../runtime/palette.bin

parsing CONTAINER table RED file out : ../../runtime/red.bin

parsing CONTAINER table GREEN file out : ../../runtime/green.bin

parsing CONTAINER table BLUE file out : ../../runtime/blue.bin

parsing CONTAINER table TIME file out : ../../runtime/time.bin

parsing CONTAINER table DIAL file out : ../../runtime/dial.bin

parsing CONTAINER table FDPAL file out : ../../runtime/fdpal.bin

parsing CONTAINER table RDPAL file out : ../../runtime/rdpal.bin

parsing CONTAINER table FLDI file out : ../../runtime/fldi.bin

parsing CONTAINER table HLD file out : ../../runtime/hld.bin

parsing CONTAINER table ARR file out : ../../runtime/arr.bin

parsing CONTAINER table DEP file out : ../../runtime/dep.bin

parsing CONTAINER table SEL file out : ../../runtime/sel.bin

parsing CONTAINER table FPLM file out : ../../runtime/fplm.bin

parsing CONTAINER table FLDA file out : ../../runtime/flda.bin file out :

../../runtime/flda_2.bin file out : ../../runtime/flda_3.bin

parsing CONTAINER table BROWSE file out : ../../runtime/browse.bin

parsing CONTAINER table CDW file out : ../../runtime/cdw.bin

parsing CONTAINER table SQN file out : ../../runtime/seq.bin file out :

../../runtime/seq_2.bin file out : ../../runtime/seq_3.bin file out :

../../runtime/seq_4.bin file out : ../../runtime/seq_5.bin

parsing CONTAINER table PDL file out : ../../runtime/pdl.bin

parsing CONTAINER table MET_AIS_AIS file out : ../../runtime/list_AIS.bin

parsing CONTAINER table MET_AIS_MET file out : ../../runtime/list_MET.bin

[ compiling dialog ]

**** DIALOG PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_dialog dialog.dsp

-i../../source/ddl/dialog.inc

-s../../source/include/dialog_tool_ref.h

-r/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/dialog_reference.h

-o../../source/ddl/dialog.pre -e ;

file input : /usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/dialog_reference.h

DIALOG Compiler V.0.0

46 Dialog(s) read for ADI V.1

END OF COMPILE PHASE

NO ERRORS

**** DIALOG PARSER COMPLETED ****

**** GENSET ON DIALOG STARTED ....






-sdialog_inc_ref.h ../../source/ddl/dialog.pre

-o../../runtime/dialog.bin || rm -f ../../runtime/dialog.bin

input file found in

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib/dialog_inc_ref.h

**** GENSET ON DIALOG COMPLETED ****

[ compiling preview ]


8/3/2019 E000IES0_01SUM_C

26/63


Issue C

Date: 16/10/2002

**** PREVIEW PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_preview preview.dsp

-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/consegna -I../../source/ddl

-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl

-I../../source/include

-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/

-l../../source/ddl/preview.log -O../../source/ddl/preview.pre

parsing macro file started ...

parser completed !

**** PREVIEW PARSER COMPLETED ****

**** GENSET ON PREVIEW STARTED ....






-spreview_inc_ref.h ../../source/ddl/preview.pre

-o../../runtime/preview.bin

input file found in

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib/preview_inc_ref.h

**** GENSET ON PREVIEW COMPLETED ****

[ compiling alarm ]

**** ALARM PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_alarm





alarm.dsp; cp alarm.bin ../../runtime/alarm.bin

Start of alarm descriptor file parsing .....

Cannot access to plml.h file

..... End of alarm descriptor file parsingStart of DATASET compilation alarm.bin

DATASET parser completed !

**** ALARM PARSER COMPLETED ****

[ compiling contact ]

**** CONTACT PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_contact

-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/consegna -I../../source/ddl

-I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl -I../../source/include




-Gquick -o../../source/ddl/contact.cdl-s../../source/ddl/contact.pre -c../../runtime/a_globcontact_p

-C../../runtime/a_contacttpl_p

-t../../runtime/a_globtrk_p -T../../runtime/a_trktpl_p

-p../../runtime/a_globplo_p -P../../runtime/a_plotpl_p

-a../../runtime/a_contactapi_p -S../../source/include/contact_GRP_0.symbols

-i../../source/include/gkf_contact_symbols.h

-z../../runtime/a_gkf_contact_symbol_p

-k contact.dsp

OPEN contact.dsp file

*** Parsing PENDING class

FIRST SELECT SYMBOL: 'P_SELECT'

*** Parsing CONTROLLED class

*** Parsing PLOT class

*** Parsing NOT_PRESENT_TEMPLATE template

*** Parsing PENDING template

*** Parsing CONTROLLED template

*** Parsing NEIGHBOUR template


8/3/2019 E000IES0_01SUM_C

27/63


Issue C

Date: 16/10/2002

*** Parsing HANDOVER_SEN template

*** Parsing HANDOVER_REC template

*** Parsing PLOT template

generation code started ...

Start of CDL compilation contact_GRP_0.cdl

Start of DATASET compilation ../../source/ddl/contact.preGeneration of CDL file completed

Start of CONTACT PRIMITIVES compilation ../../runtime/a_gkf_contact_symbol_p.info

Start of CONTACT ATTRIBUTE compilation ../../runtime/a_contactattribute_p.info

Start of GLOB CONTACT compilation ../../runtime/a_globcontact_p.info

GLOBAL WRITE SELECT_PRIMITIVE: 'P_SELECT'= [-13,-13][13,13]

Start of TPL CONTACT compilation ../../runtime/a_contacttpl_p.info

WARNING: symbol name not found '(null)'

Happened with state = PLOT, and symbol for speed vector field

Start of API compilation ../../runtime/a_contactapi_p.info

Error: Wrong Or Undefined Plot Label Distance (0)

Default Assigned (0.7 * track's) (31)

Start of SYMBOL compilation ../../source/include/contact_GRP_0.symbols

Start of CDL compilation contact_SRP_0.cdl

Start of DATASET compilation ../../source/ddl/contact.pre

Generation of CDL file completed

Start of CDL compilation contact_TRP_0.cdl

Start of DATASET compilation ../../source/ddl/contact.pre


... generation code completed

... generation makefile started

... generation makefile completed

parser completed !

**** CONTACT PARSER COMPLETED ****

make -f ../../source/ddl/multi_ddl.mk quick

DSP_PARTNER=/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04;

**** GENSET ON CONTACT STARTED ....






-a -scont.symbols

../../source/ddl/contact.pre -o../../runtime/contact.bin ||

rm -f ../../runtime/contact.bin

input file found in

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib/cont.symbols

**** GENSET ON CONTACT COMPLETED ****

[ compiling gkf ]

**** CURSOR PARSER STARTED ....

/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../tools/bin/dsp_cursor



-I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci cursor.dsp

-s../../source/include/cursor_configuration.h -o../../source/ddl/cursor.pre || rm -f

../../source/ddl/cursor.pre

Start of cursor descriptor file parsing .....

parsing cursor file started ...

NO OF DEC 1

NO OF DEC 1

..... End of cursor descriptor file parsing

End of dataset file generation

Output File 'a_gkf_file_p.dat' ... Built.


8/3/2019 E000IES0_01SUM_C

28/63


Issue C

Date: 16/10/2002

End of sdl files generation

End of sdl make file generation

**** CURSOR PARSER COMPLETED ****

mv ../../source/ddl/situation0.symbols ../../source/include/situation_GRP_0.symbols;mv ../../source/ddl/situation1.symbols ../../source/include/situation_SRP_0.symbols;

**** GENSET ON CURSOR STARTED ....





-s/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/cursor.symbols

../../source/ddl/cursor.pre -o../../runtime/cursor.bin || rm -f

../../runtime/cursor.bin

**** GENSET ON CURSOR COMPLETED ****

**** TOOL_FILES INSTALLING STARTED ....

**** ... TOOL_FILES INSTALLING COMPLETED ****

rm -f gsl.mk map_attributes.dsp widget_dsp.mk

rm -f GENERATION_IN_PROGRESS.doc

---

It might happen that the changes, made during the edit session, don't appear during the runtime testsession. This might depend on a wrong sequence in the data-set compiling phase. In order to grant thecorrect compilation of all changes, sometimes might be necessary to execute the rm_all command(removing all the compilation products), before re-starting the compilation.


8/3/2019 E000IES0_01SUM_C

29/63


Issue C

Date: 16/10/2002

4.4 RUNNING THE HCI APPLICATION WITH A LOCAL PLAYBACK :

TRACE 4

After dataset generation, run the HCI excutable with a playback of traffic messages:

(remember to digit "r" after the run.sh command script starts the execution: the playback runs inbatch, while the HCI runs with dbx, so needs the run command ("r")).

---

> run.sh

[1] 1742

path = /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/runtime/BUFFER

dbx version 3.11.8

Type 'help' for help.

waiting for connection: Connection refused

main: Source not available

(dbx) r

waiting for connection: No such file or directory

waiting for connection: No such file or directory

playback file RECDEMO opened

X Toolkit Warning: Cannot convert string "-*-Menu-Medium-R-Normal--*-120-*-*-P-*-ISO8859-1"

to type FontStruct

WARNING: Not Loadable Font:

10x24

Warning - load GSL style.

BitmapFileInvalid for file:

pattern625.xbm

Warning - load GSL style.


pattern625.xbmWarning - load GSL style.


pattern625.xbm

04/06/99 16:10:26 - ATC_FLIGHT Error: STATUS_CHECK: Error in the compatibility between

status and method (method: Stop).

04/06/99 16:10:28 - ATC_SUP Warning: XDI connected ( < 3.0) is not fully compatible

msg_number = 100

msg_number = 200

msg_number = 300

msg_number = 400

msg_number = 500

msg_number = 600

msg_number = 700

...

---


8/3/2019 E000IES0_01SUM_C

30/63


Issue C

Date: 16/10/2002

On the screen the HCI will have the following appearance:

Fig._ 4.4-1 HCI Appearance By Default Data-sets

Now kill the HCI application using c, followed by q

---

Interrupt

signal Interrupt at >*[__select, 0x3ff850581c8] beq r19, 0x3ff850581e0

(dbx) q

---


8/3/2019 E000IES0_01SUM_C

31/63


Issue C

Date: 16/10/2002

4.5 USING THE INTERFACE EDITOR SYSTEM - WIDGET FACILITY :

TRACE 5

Now run again the Interface Editor System:

---

> E041HCI2.SH ies

For the messages on the screen please refer to the paragraph 4.2 [TRACE 2].

Click on the "WIDGET" button:

---

SYSTEM STRING /usr2/ies/IES_KIT/IES_KIT_06102000/ies/IesRun.sh widget

/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04 /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04

/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/consegna



/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib

IES WIDGET STARTING

Using Project Path: /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl/

Using Library Path: /usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib/

__Builder: WIDGET

__Version: IES-02_00 6-OCT-2000

__Status: 0

/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/runtime//resource_range.dat

Warning - can't load GSL cursor.

Bitmap File: /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/runtime/Warning.xbm

Warning - can't load GSL cursor.Bitmap File: /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/runtime/Warning.xbm

current_dsp_file: widget.dsp

open_file: /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl/widget.dsp

parser started ...

Shell SLDA

Shell TLDA

Shell DRAW_SYM

Shell DRAW_BROK

Shell LOCMAPS_CAT_MENU

Shell DRAW_ARC

Shell DRAW_TEXT

Shell Menu

Shell Menu_Popup

Shell DF_MENU

Shell LOCMAPS_EDIT_MENU

Shell LDA

Shell SDA

Shell SLC

Shell ORIENT_MENU

Shell MAPS_MENU

Shell ICM_MENU

Shell RRA

Shell GRP

Shell LIST

Shell LIST_NO_SCROLLBAR

Shell LIST_NO_RESIZE

Shell LIST_NO_RESIZE_NSA

Shell PREVIEWShell PREVIEW_FIELD


8/3/2019 E000IES0_01SUM_C

32/63


Issue C

Date: 16/10/2002

Shell CHOICE

Shell ICON

Shell MUTE

Shell TRACE_OBJECTS

Shell TRACELIST

Shell WDG_ECHOShell WDG

Shell GLOBMAP_MENU

Shell CKM

Shell XEVENT

Shell CDW_LIST

String Define Not Found: MAP_0_MOTIF

Indirect Color Declaration For: MAP_0 : 0

String Define Not Found: TRANSPARENT_COLOR_MOTIF

Indirect Color Declaration For: TRANSPARENT_COLOR : 22

...

E000IES0_01SUM_C.DOC

UNCLASSIFIED Page 25

8/3/2019 E000IES0_01SUM_C

33/63


Issue C

Date: 16/10/2002

Load the "SLC" (screen layout) Motif interface selecting the "File" "Load" main menu

item and the selecting the "SLC" item on the popped up selection box:

The "SLC" structural tree will look like the following:

Fig._ 4.5-1 "SLC" Structural Tree

while the "SLC" interface will be like the following:


8/3/2019 E000IES0_01SUM_C

34/63


Issue C

Date: 16/10/2002

Fig._ 4.5-2 "SLC" Interface

Change the "SLC" interface title opening the "SLC.Form0.Label1" widget properties editor: change the"labelString" resource from "SCREEN LAYOUT" to the italian "LAYOUT DI SCHERMO":

Fig._ 4.5-3 "SLC.Form0.Label1" Widget Properties Editor

Then change the "GRP_RIG" toggleButton widget "labelString" resource from "LEFT" to the italian"SINISTRA"; apply the same change to the "ESB_RIG" widget resources.

Open the "SLC.Form0.Frame3.Form4" widget (the form containing the two previous toggleButtonwidgets) properties editor, and change the "background" resource to "ARM_COL" (Override Defaults -background):


8/3/2019 E000IES0_01SUM_C

35/63

8/3/2019 E000IES0_01SUM_C

36/63


Issue C

Date: 16/10/2002

Fig._ 4.5-6 The "SLC" Interface

Now select "File" "Save" and the "File" "Exit"


8/3/2019 E000IES0_01SUM_C

37/63


Issue C

Date: 16/10/2002

4.6 USING THE INTERFACE EDITOR SYSTEM - TABULAR FACILITY :

TRACE 6

Click now on the "TABULAR" button of the IES main panel:

Execute "File" "Load", then selecting "fldi" on the table selection box:

---

SYSTEM STRING /usr2/ies/IES_KIT/IES_KIT_06102000/ies/IesRun.sh tabular








__Builder: TABULAR


__Status: 0






...

table name: FLDI

Opening File: /usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib/fldi.dsp ... DONE





...

---

The "FLDI" structural tree and layout will look like the following:


8/3/2019 E000IES0_01SUM_C

38/63


Issue C

Date: 16/10/2002

Fig._ 4.6-1 The "FLDI" Structural Tree

Fig._ 4.6-2 The "FLDI" Layout


8/3/2019 E000IES0_01SUM_C

39/63


Issue C

Date: 16/10/2002

We would like to change the default offset in the title, the header and the list parts of the FLDI table.

Open the properties editor of the FLDI table node using the right mouse button.

Fig._ 4.6-3 The "FLDI" TABLE (Table) Node Properties Editor

In order to change some properties like the title_top_offset, you must change the value Default toOverride on the button at the right margin of the property.

Fig._ 4.6-4 The "Default/Override" Pop-up Menu


8/3/2019 E000IES0_01SUM_C

40/63


Issue C

Date: 16/10/2002

Setting this value allows to change the current value of the property, then you can set thetitle_top_offset value to 15 from 5.

Make the same change for the title_bottom_offset value to 15 from 5, for the header_top_offsetvalue to 10 from 5 and for the header_bottom_offset value to 10 from 5. Then you can see thefollowing properties editor.

Fig._ 4.6-5 The "FLDI" TABLE (Table) Node Properties Editor After The Changes

Press the Apply button to confirm the changes.

In order to change some other properties on the list node open his properties editor using the right mousebutton on the LIST (List) Node of the FLDI table.


8/3/2019 E000IES0_01SUM_C

41/63


Issue C

Date: 16/10/2002

Fig._ 4.6-6 The "LIST(List)" Properties Editor Of The FLDI Table

You must change the value Default to Override on the button at the right margin of theentry_left_offset property and of the entry_right_offset propery.

Setting this value allows to change the current value of the property, then you can set theentry_left_offset value to 15 from 5 and the entry_right_offset value to 15 from 5.

Then you can see the following properties editor.


8/3/2019 E000IES0_01SUM_C

42/63


Issue C

Date: 16/10/2002

Fig._ 4.6-7 The "LIST(List)" Properties Editor Of The FLDI Table After The Changes


8/3/2019 E000IES0_01SUM_C

43/63


Issue C

Date: 16/10/2002

When you press the Apply button you can see the changes on the FLDI layout preview.

Fig._ 4.6-8 The "FLDI" Layout After The Changes

Execute "File" Save and Exit".


8/3/2019 E000IES0_01SUM_C

44/63


Issue C

Date: 16/10/2002

4.7 USING THE INTERFACE EDITOR SYSTEM - CONTACT FACILITY :

TRACE 7

Click now on the "CONTACT" button of the IES main panel:

---

SYSTEM STRING /usr2/ies/IES_KIT/IES_KIT_06102000/ies/IesRun.sh contact








__Builder: CONTACT

__Version: IES-02_00 6-OCT-2000__Status: 0






INCLUDE /usr2/ies/IES_KIT/IES_KIT_06102000/ies/bin/dsp_ies_contact

INCLUDE -I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/include

INCLUDE -I/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl

INCLUDE -I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci/../../lib

INCLUDE -I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci

INCLUDE -I/usr2/ies/IES_KIT/IES_KIT_06102000/ies/files/csci

INCLUDE contact.dsp

INCLUDE -scontact.bin

OPEN /usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/source/ddl/contact.dsp file

*** Parsing PENDING class

FIRST SELECT SYMBOL: 'P_SELECT'*** Parsing CONTROLLED class

*** Parsing PLOT class

*** Parsing NOT_PRESENT_TEMPLATE template

*** Parsing PENDING template

*** Parsing CONTROLLED template

*** Parsing NEIGHBOUR template

*** Parsing HANDOVER_SEN template

*** Parsing HANDOVER_REC template

*** Parsing PLOT template

generation code started ...

Start of CDL compilation contact_GRP_0.cdl

Start of DATASET compilation contact.bin


Start of CDL compilation contact_SRP_0.cdl


Generation of CDL file completedStart of CDL compilation contact_TRP_0.cdl



... generation code completed

... generation makefile started

... generation makefile completed

parser completed !





String Define Not Found: PENDING_COLOR_MOTIF

Indirect Color Declaration For: PENDING_COLOR : 32

String Define Not Found: CONTROLLED_COLOR_MOTIF

...


8/3/2019 E000IES0_01SUM_C

45/63


Issue C

Date: 16/10/2002

Indirect Color Declaration For: LABEL_BACK_STYLE : 14

String Define Not Found: CONST_NORMAL_TEMPLATE_MOTIF

...

String Define Not Found: CONST_GHOST_TEMPLATE_MOTIF

Indirect Color Declaration For: CONST_GHOST_TEMPLATE : 2

String Define Not Found: CONST_BIG_TEMPLATE_MOTIFIndirect Color Declaration For: CONST_BIG_TEMPLATE : 3

...

---

The following contact classes hierarchy tree will be visible on the screen:

Fig._ 4.7-1 Contact Classes Hierarchy Tree

View the PENDING class structural tree:


8/3/2019 E000IES0_01SUM_C

46/63


Issue C

Date: 16/10/2002

Page 39UNCLASSIFIEDE000IES0_01SUM_C.DOC

8/3/2019 E000IES0_01SUM_C

47/63


Issue C

Date: 16/10/2002

Fig._ 4.7-2 PENDING Class Structural Tree

Open the "background" node properties editor and change the resources "color" to "FIL_5" and "style" to"OPAQUE0":

Fig._ 4.7-3 "background" Node Properties Editor

The preview window will look like that of the following figure:

Fig._ 4.7-4 The Preview Window

Now go back to the hierarchy tree representation, and view

the CONTROLLED class structural tree:


8/3/2019 E000IES0_01SUM_C

48/63


Issue C

Date: 16/10/2002

Page 41UNCLASSIFIEDE000IES0_01SUM_C.DOC

8/3/2019 E000IES0_01SUM_C

49/63


Issue C

Date: 16/10/2002

Fig._ 4.7-5 "CONTROLLED" Class Structural Tree

Execute the menu "Edit" "Grid", selecting "GRID_SMALL_0", then modify the "char_size" resource,adding 3 pixels to char width and char height.

Fig._ 4.7-6 "GRID_SMALL_0" Grid Properties Editor

Now click with the Action Button of the mouse (Btn1), on the "Label" tree node; the preview windowwill look like that of the following figure:


Open the "background" node properties editor and set the resources "visible", "edge","shadowThickness", "shadowType" and "bottomShadowColor" to the values visible in the followingfigure:


8/3/2019 E000IES0_01SUM_C

50/63


Issue C

Date: 16/10/2002

Fig._ 4.7-8 the "background" Node Properties Editor

Open the "FLD_MODECODE" properties editor and set the resources "visible", "position" and "color" tothe values "TRUE", "C#10; R#2" and "OVL_2".

Applying all these changes, the preview window will look like that of the following figure:


Execute "File" "Save", then "File" "Exit".


8/3/2019 E000IES0_01SUM_C

51/63


Issue C

Date: 16/10/2002

4.8 USING THE INTERFACE EDITOR SYSTEM - GSL FACILITY : TRACE 8

Click now on the "GSL" button of the IES main panel:

---

SYSTEM STRING /usr2/ies/IES_KIT/IES_KIT_06102000/ies/IesRun.sh gsl








__Builder: GSL


__Status: 0

/usr2/ies/IES_KIT/IES_KIT_06102000/std_cwp_04/runtime//resource_range.datWarning - can't load GSL cursor.




parser started ...

Version 2

parser completed !

>>>>> Warning : Unable To Declare Cursor

'-Rubberband-Line-*-50-*-1-*-'


'-Rubberband-Rectangle-*-50-*-1-*-'


'-Rubberband-None-*-50-*-1-*-'


'-Rubberband-Line-*-50-*-35-*-'

...

---


8/3/2019 E000IES0_01SUM_C

52/63


Issue C

Date: 16/10/2002

Execute "Edit" "Fonts", selecting the font category "TRACK_FONT2"; set the resources "Font Type" to

"-adobe-helvetica-bold-r-normal--20-140-100-100-p-105-iso8859-1", and "Grid Width" and "Grid

Height" respectively to 18 and 23:

Fig._ 4.8-1 Modifying "TRACK_FONT2" Font Category

Modify now the font category "FLIGHT_FONT1", setting its resources "Font Type" to

"-adobe-helvetica-bold-r-normal--14-140-75-75-p-82-iso8859-1", and "Grid Width" and "Grid Height"respectively to 15 and 22:

Then execute "File" "Save" and "File" "Exit"


8/3/2019 E000IES0_01SUM_C

53/63


Issue C

Date: 16/10/2002

Execute "rm_all" from the command terminal to generate again all the resource files (dataset).

Now click on the IES main panel the "COMPILE" button.

The messages that will appear on the command terminal window will

be similar to that of the previous paragraph 4.3 [TRACE 3].

After dataset generation, run the HCI excutable with a playback of traffic messages:

(remember to digit "r" after the run.sh command script starts the execution:

The messages that will appear on the command terminal window will be similar to that of the previousparagraph 4.4 [TRACE 4].


8/3/2019 E000IES0_01SUM_C

54/63


Issue C

Date: 16/10/2002

The HCI application will look like the following figure:

Fig._ 4.8-2 HCI Appearance Using IES Modified Data-sets


8/3/2019 E000IES0_01SUM_C

55/63


Issue C

Date: 16/10/2002

4.9 AUTOMATIC BACKUP

In order to provide a maintenance activity relative to IES project its necessary, before every Save-operation, to make a copy of the previous dataset. The security backup of the file (.dsp) is made with thesame name and extension of the original file, with an additional extension including the informationabout the current year, month, day, hour, minute and second (.); the backupfile is created in a new directory named "backup.d" under the project ddl directory.

For instance, using IES Widget facility in a system named demo, if you execute a save project actionfor the Lda interface, you will see the following message in the Xterm Window:

NOTICE: A Copy Of The File:

/disk9/cwpgen/system/demo/source/ddl/lda.dsp

Has Been Written As The Backup File:

/disk9/cwpgen/system/demo/source/ddl/backup.d/lda.dsp.Y1999M09D28h10m32s17

In this example the saving operation is accomplished at 10:32:17, 28/09/99.

The backup action takes place only if the project file is already located under the project ddl directory(and not in case of library project files).

Using Save as command the tool make a backup copy only if you overwrite an existent project file.


8/3/2019 E000IES0_01SUM_C

56/63


Issue C

Date: 16/10/2002

5 INSTALLING THE FINAL COMPILED DATA-SETS ON THE ON-LINE

TARGET ENVIRONMENT

After a customised data-set configuration has been defined, widely tested, completely bugs freeconsidered, and definitely accepted by controllers and software configuration responsible, configurationdata-sets should then be transferred on the on-line target platforms, to be definitely used as HCI and TCAinitialisation files.

Beware: the off-line testing environment doesn't allow a complete check on the configuration data. TCA

procedures work generally on an on-line environment, and many of the HCI input/output data need a

wider solicitation.

What is here suggested, is to take under observation, and on only one target on-line platform the newdata-sets; this stress test might continue for some weeks, to be absolutely sure that the new configurationis bug free at all.

5.1 WHAT MUST BE KNOWN BEFORE

In order to install customised data-sets on target platforms, the user should know exactly:

1. For the off-line development platform: nodename, tcp-address, and username and password for theaccount where the I.E.S. environment has been installed.

2. For all the on-line platforms where HCI and TCA run: nodenames, tcp-addresses, username andpasswordfor each account used.

3. How these machines are connected one to each other, if by LAN connection, or if they are stand alone,and furnished with a DAT or similar i/o devices.

In any case, we try to define a general purpose procedure, to achieve the goal of upgrading the on-linestations with I.E.S. generated new data-sets.

5.2 INSTALLATION STEPS

In one of the first paragraphs we explained how to install the whole I.E.S. environment under the off-lineplatform (Par. 3.2). The I.E.S. directories architecture is explained also in the figure of Par. 3.1. Withreference to the names used in these two paragraphs, one should execute the following commands:

"s " (the current work directory becomes now the system directory; as shown in thefigure it contains the sub-directory "runtime", where final data-set are located, also for testingpurposes; this sub-directory should contain also the "Map Editor" data-sets (".mpp" files), for whatattains to the HCI background maps).

"tar cvf ./runtime" (In this way all the customised files will bemerged in a single transportable file).

"compress " (within the directory you will thenfind a file, named .Z).

Transfer this file, making use of "rcp" or "ftp" or "DAT i/o device", to the father directory where theon-line system data-sets are located, repeatedly for each required platform.

After that the ".Z" file has been correctly positioned, tipically on a$HOME directory of the runtime user, activate the commands:

"uncompress .Z"

"tar xvf " (obtaining a newdirectory named "runtime", under the father directory where the on-line initialisation system

datasets are located).


8/3/2019 E000IES0_01SUM_C

57/63


Issue C

Date: 16/10/2002

Stop the HCI program execution on the on-line node, if enabled to do so, following somewhere elsedescribed standard procedures.

Make a copy of the current under a significant new directory

name, to save it for a possible future restoring of the previous configuration (Pay Attention : keep theprevious used HCI executable file, because its contained in the runtime directory and could bedifferent from the file contained in the new runtime directory)

Copy the files contained in the just created "runtime" directory under the

Restart the HCI program, using somewhere else described standard procedures, and verify that theHCI application results correctly re-customised

When the installation procedure has been correctly executed on the target on-line platform, it isrecommended to remove all the files or directories used as transfer files, to save disk space.

It is also recommended to backup on a "DAT" cartridge the whole I.E.S. environment installed as anew customisation release, and to keep this backup in order to be able to reconstruct all specificcustomised source data configuration.


8/3/2019 E000IES0_01SUM_C

58/63


Issue C

Date: 16/10/2002

6 APPENDIX

6.1 SYNTHETIC CHECK PROCEDURE

s std_cwp_04 (under source/ddl only lists.dsp)

E041HCI2.SH ies

GSL:

- Save

WIDGET:

- File Load SLC

- Change the text string "SCREEN LAYOUT" (SLC.Form0.Label1)to "LAYOUT DI SCHERMO"

- Change the background resource for the widget (SLC.Form0.Frame3.Form4):background: ARM_COL

- Resize the whole interface:dimensions: *2 *1.7

- File Save; Exit


8/3/2019 E000IES0_01SUM_C

59/63


Issue C

Date: 16/10/2002

TABULAR:

- File Load fldi

- Edit Properties FLDI (Table) Node

title_top_offset: 30title_bottom_offset: 30header_top_offset: 30header_bottom_offset: 30

- Modify the properties editor of List:

entry_top_offset: 20entry_bottom_offset: 20entry_left_offset: 20entry_right_offset: 20

- Edit Attribute/Parametric Attribute/ FLDI_A_TEXT:color_name: DIR_FINDER_COLOR

- File Save; Exit


8/3/2019 E000IES0_01SUM_C

60/63


Issue C

Date: 16/10/2002

CONTACT:

- PENDING View Structurebackground

color : FIL_5style : OPAQUE0

- CONTROLLED View Structure

- Click AB on Label

- Edit GridGRID_SMALL_0

char_size: +3 +3

- backgroundvisible : TRUEedge : 6shadowThickness : 6shadowType : STACKEDbottomShadowColor : OVL_2

- FLD_MODECODE :visible : TRUEposition : C#10; R#2color : OVL_2

- File Save; Exit


8/3/2019 E000IES0_01SUM_C

61/63


Issue C

Date: 16/10/2002

GSL:

- Edit Fonts TRACK_FONT2Font Type :

-adobe-helvetica-bold-r-normal--20-140-100-100-100-p-105-iso8859-1Grid Width : 18Grid Height : 23

- Edit Fonts FLIGHT_FONT1Font Type :

-adobe-helvetica-bold-r-normal--14-140-75-75-p-82-iso8859-1Grid Width : 14Grid Height : 17

- File Save; Exit

rm_all

COMPILE

run.sh


8/3/2019 E000IES0_01SUM_C

62/63


Issue C

Date: 16/10/2002

LIST OF TABLES AND FIGURES

FIG._ 4.2-1 IES MAIN PANEL 14FIG._ 4.4-1 HCI APPEARANCE BY DEFAULT DATA-SETS 23FIG._ 4.5-1 "SLC" STRUCTURAL TREE 26FIG._ 4.5-2 "SLC" INTERFACE 27FIG._ 4.5-3 "SLC.FORM0.LABEL1" WIDGET PROPERTIES EDITOR 27FIG._ 4.5-4 "SLC.FORM0.FRAME3.FORM4" WIDGET PROPERTIES EDITOR 28FIG._ 4.5-5 "SLC" TOPLEVELSHELL PROPERTIES EDITOR 28FIG._ 4.5-6 THE "SLC" INTERFACE 29FIG._ 4.6-1 THE "FLDI" STRUCTURAL TREE 31FIG._ 4.6-2 THE "FLDI" LAYOUT 31FIG._ 4.6-3 THE "FLDI" TABLE (TABLE) NODE PROPERTIES EDITOR 32FIG._ 4.6-4 THE "DEFAULT/OVERRIDE" POP-UP MENU 32FIG._ 4.6-5 THE "FLDI" TABLE (TABLE) NODE PROPERTIES EDITOR AFTER THE CHANGES 33

FIG._ 4.6-6 THE "LIST(LIST)" PROPERTIES EDITOR OF THE FLDI TABLE 34FIG._ 4.6-7 THE "LIST(LIST)" PROPERTIES EDITOR OF THE FLDI TABLE AFTER THE CHANGES

35FIG._ 4.6-8 THE "FLDI" LAYOUT AFTER THE CHANGES 36FIG._ 4.7-1 CONTACT CLASSES HIERARCHY TREE 38FIG._ 4.7-2 PENDING CLASS STRUCTURAL TREE 40FIG._ 4.7-3 "BACKGROUND" NODE PROPERTIES EDITOR 40FIG._ 4.7-4 THE PREVIEW WINDOW 40FIG._ 4.7-5 "CONTROLLED" CLASS STRUCTURAL TREE 42FIG._ 4.7-6 "GRID_SMALL_0" GRID PROPERTIES EDITOR 42FIG._ 4.7-7 THE PREVIEW WINDOW 42FIG._ 4.7-8 THE "BACKGROUND" NODE PROPERTIES EDITOR 43FIG._ 4.7-9 THE PREVIEW WINDOW 43

FIG._ 4.8-1 MODIFYING "TRACK_FONT2" FONT CATEGORY 45FIG._ 4.8-2 HCI APPEARANCE USING IES MODIFIED DATA-SETS 47


8/3/2019 E000IES0_01SUM_C

63/63


Issue C

Date: 16/10/2002

DISTRIBUTION LIST

LOCATION NAME COPY No2

A4.3 P. Sbarigia

A4.3 R. Lanciotti

G2.2 A. Belisari