DTP CrossPoint 4K Series - Extron€¦ · Pour en savoir plus sur les règles de sécurité, la conformité à la réglementation, la compatibilité EMI/EMF, l’accessibilité, et

68-2368-51 Rev. B10 19

DTP CrossPoint 4K SeriesScaling Presentation Matrix Switcher

Matrix Switcher

Setup Guide

Safety InstructionsSafety Instructions • English

WARNING: This symbol, , when used on the product, is intended to alert the user of the presence of uninsulated dangerous voltage within the product’s enclosure that may

present a risk of electric shock.

ATTENTION: This symbol, , when used on the product, is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment.

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the Extron Safety and Regulatory Compliance Guide, part number 68-290-01, on the Extron website, www.extron.com.

Sicherheitsanweisungen • Deutsch

WARNUNG: Dieses Symbol auf dem Produkt soll den Benutzer darauf aufmerksam machen, dass im Inneren des Gehäuses dieses Produktes gefährliche Spannungen herrschen, die nicht isoliert sind und die einen elektrischen Schlag verursachen können.

VORSICHT: Dieses Symbol auf dem Produkt soll dem Benutzer in der im Lieferumfang enthaltenen Dokumentation besonders wichtige Hinweise zur Bedienung und Wartung (Instandhaltung) geben.

Weitere Informationen über die Sicherheitsrichtlinien, Produkthandhabung, EMI/EMF-Kompatibilität, Zugänglichkeit und verwandte Themen finden Sie in den Extron-Richtlinien für Sicherheit und Handhabung (Artikelnummer 68-290-01) auf der Extron-Website, www.extron.com.

Instrucciones de seguridad • Español

ADVERTENCIA: Este símbolo, , cuando se utiliza en el producto, avisa al usuario de la presencia de voltaje peligroso sin aislar dentro del producto, lo que puede representar un riesgo de descarga eléctrica.

ATENCIÓN: Este símbolo, , cuando se utiliza en el producto, avisa al usuario de la presencia de importantes instrucciones de uso y mantenimiento recogidas en la documentación proporcionada con el equipo.

Para obtener información sobre directrices de seguridad, cumplimiento de normativas, compatibilidad electromagnética, accesibilidad y temas relacionados, consulte la Guía de cumplimiento de normativas y seguridad de Extron, referencia 68-290-01, en el sitio Web de Extron, www.extron.com.

Instructions de sécurité • Français

AVERTISSEMENT: Ce pictogramme, , lorsqu’il est utilisé sur le produit, signale à l’utilisateur la présence à l’intérieur du boîtier du produit d’une tension électrique dangereuse susceptible de provoquer un choc électrique.

ATTENTION: Ce pictogramme, , lorsqu’il est utilisé sur le produit, signale à l’utilisateur des instructions d’utilisation ou de maintenance importantes qui se trouvent dans la documentation fournie avec le matériel.

Pour en savoir plus sur les règles de sécurité, la conformité à la réglementation, la compatibilité EMI/EMF, l’accessibilité, et autres sujets connexes, lisez les informations de sécurité et de conformité Extron, réf. 68-290-01, sur le site Extron, www.extron.com.

Istruzioni di sicurezza • Italiano AVVERTENZA: Il simbolo, , se usato sul prodotto,

serve ad avvertire l'utente della presenza di tensione non isolata pericolosa all'interno del contenitore del prodotto che può costituire un rischio di scosse elettriche.

ATTENTZIONE: Il simbolo, , se usato sul prodotto, serve ad avvertire l'utente della presenza di importanti istruzioni di funzionamento e manutenzione nella documentazione fornita con l'apparecchio.

Per informazioni su parametri di sicurezza, conformità alle normative, compatibilità EMI/EMF, accessibilità e argomenti simili, fare riferimento alla Guida alla conformità normativa e di sicurezza di Extron, cod.

articolo 68-290-01, sul sito web di Extron, www.extron.com.

Instrukcje bezpieczeństwa • PolskaOSTRZEŻENIE: Ten symbol, , gdy używany na produkt, ma

na celu poinformować użytkownika o obecności izolowanego i niebezpiecznego napięcia wewnątrz obudowy produktu, który może stanowić zagrożenie porażenia prądem elektrycznym.

UWAGI: Ten symbol, , gdy używany na produkt, jest przeznaczony do ostrzegania użytkownika ważne operacyjne oraz instrukcje konserwacji (obsługi) w literaturze, wyposażone w sprzęt.

Informacji na temat wytycznych w sprawie bezpieczeństwa, regulacji wzajemnej zgodności, zgodność EMI/EMF, dostępności i Tematy pokrewne, zobacz Extron bezpieczeństwa i regulacyjnego zgodności przewodnik, część numer 68-290-01, na stronie internetowej Extron, www.extron.com.

Инструкция по технике безопасности • Русский

ПРЕДУПРЕЖДЕНИЕ: Данный символ, , если указан на продукте, предупреждает пользователя о наличии неизолированного опасного напряжения внутри корпуса продукта, которое может привести к поражению электрическим током.

ВНИМАНИЕ: Данный символ, , если указан на продукте, предупреждает пользователя о наличии важных инструкций по эксплуатации и обслуживанию в руководстве, прилагаемом к данному оборудованию.

Для получения информации о правилах техники безопасности, соблюдении нормативных требований, электромагнитной совместимости (ЭМП/ЭДС), возможности доступа и других вопросах см. руководство по безопасности и соблюдению нормативных требований Extron на сайте Extron: www.extron.com, номер по каталогу - 68-290-01.

安全说明 • 简体中文

警告：产品上的这个标志意在警告用户该产品机壳内有暴露的危险电压，有触电危险。

注意：产品上的这个标志意在提示用户设备随附的用户手册中有重要的操作和维护(维修）说明。

关于我们产品的安全指南、遵循的规范、EMI/EMF 的兼容性、无障碍

使用的特性等相关内容，敬请访问 Extron 网站 www.extron.com，参见 Extron 安全规范指南，产品编号 68-290-01。

www.extron.com

www.extron.com

www.extron.com

www.extron.com

www.extron.com

www.extron.com

安全記事 • 繁體中文警告: 若產品上使用此符號，是為了提醒使用者，產品機殼內存在著

可能會導致觸電之風險的未絕緣危險電壓。

注意若產品上使用此符號，是為了提醒使用者，設備隨附的用戶手冊中有重要的操作和維護（維修）説明。

有關安全性指導方針、法規遵守、EMI/EMF 相容性、存取範圍和相關

主題的詳細資訊，請瀏覽 Extron 網站：www.extron.com，然後參閱《Extron 安全性與法規遵守手冊》，準則編號 68-290-01。

安全上のご注意 • 日本語警告:この記号が製品上に表示されている場合は、筐体内に絶縁さ

れていない高電圧が流れ、感電の危険があることを示しています。

注意: この記号が製品上に表示されている場合は、本機の取扱説明書に記載されている重要な操作と保守(整備)の指示についてユーザーの注意を喚起するものです。

安全上のご注意、法規厳守、EMI/EMF適合性、その他の関連項目については、エクストロンのウェブサイトwww.extron.comより『Extron Safety and Regulatory Compliance Guide』 (P/N 68-290-01) をご覧ください。

안전 지침 • 한국어

경고: 이 기호 , 가 제품에 사용될 경우, 제품의 인클로저 내에 있는 접지되지 않은 위험한 전류로 인해 사용자가 감전될 위험이 있음을 경고합니다.

주의: 이 기호 , 가 제품에 사용될 경우, 장비와 함께 제공된 책자에 나와 있는 주요 운영 및 유지보수(정비) 지침을 경고합니다.

안전 가이드라인, 규제 준수, EMI/EMF 호환성, 접근성, 그리고 관련 항목에 대한 자세한 내용은 Extron 웹 사이트(www.extron.com)의 Extron 안전 및 규제 준수 안내서, 68-290-01 조항을 참조하십시오.

NOTE: For more information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the “Extron Safety and Regulatory Compliance Guide” on the Extron website.

Copyright

© 2017-2019 Extron Electronics. All rights reserved. www.extron.com

Trademarks All trademarks mentioned in this guide are the properties of their respective owners.The following registered trademarks, registered service marks, and trademarks are the property of RGB Systems, Inc. or Extron Electronics (see the current list of trademarks on the Terms of Use page at www.extron.com):

Registered Trademarks(®)

Extron, Cable Cubby, ControlScript, CrossPoint, DTP, eBUS, EDID Manager, EDID Minder, Flat Field, FlexOS, Glitch Free, Global Configurator, Global Scripter, GlobalViewer, Hideaway, HyperLane, HyperLane, IP Intercom, IP Link, Key Minder, LinkLicense, LockIt, MediaLink, MediaPort, NetPA, PlenumVault, PoleVault, PowerCage, PURE3, Quantum, Show Me, SoundField, SpeedMount, SpeedSwitch, StudionStation, System INTEGRATOR, TeamWork, TouchLink, VideoLounge, V-Lock, VN-Matrix, VoiceLift, WallVault, WindoWall, XPA, XTP, XTP Systems, and ZipClip

Registered Service Mark(SM): S3 Service Support Solutions

Trademarks(™)

AAP, AFL (Accu-RATE Frame Lock), ADSP (Advanced Digital Sync Processing), Auto-Image, AVEdge, CableCover, CDRS (Class D Ripple Suppression), DDSP (Digital Display Sync Processing), DMI (Dynamic Motion Interpolation), Driver Configurator, DSP Configurator, DSVP (Digital Sync Validation Processing), eLink, EQIP, EverLast, FastBite, Flex55, FOX, FOXBOX, IP Intercom HelpDesk, MAAP, MicroDigital, Opti-Torque, PendantConnect, ProDSP, QS-FPC (QuickSwitch Front Panel Controller), Room Agent, Scope-Trigger, ShareLink, SIS, Simple Instruction Set, Skew-Free, SpeedNav, Triple-Action Switching, True4K, Vector™ 4K, WebShare, XTRA, and ZipCaddy

www.extron.com

www.extron.com

www.extron.com

http://www.extron.com/download/files/userman/68-290-01

http://www.extron.com/download/files/userman/68-290-01

http://www.extron.com

https://www.extron.com/company/article.aspx?id=termsprivacy


FCC Class A Notice

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC rules. The Class A limits provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause interference. This interference must be corrected at the expense of the user.

ATTENTION: • The Twisted Pair Extension technology works with

unshielded twisted pair (UTP) or shielded twisted pair (STP) cables; but to ensure FCC Class A and CE compliance, STP cables and STP Connectors are required.

• La technologie extension paires torsadées fonctionne avec les câbles paires torsadées blindées (UTP) ou non blindées (STP). Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et les connecteurs STP sont nécessaires.

Battery Notice

This product contains a battery. Do not open the unit to replace the battery. If the battery needs replacing, return the entire unit to Extron (for the correct address, see the Extron Warranty section on the last page of this guide).

CAUTION: Risk of explosion. Do not replace the battery with an incorrect type. Dispose of used batteries according to the instructions.

ATTENTION : Risque d’explosion. Ne pas remplacer la pile par le mauvais type de pile. Débarrassez-vous des piles usagées selon le mode d’emploi.

Conventions Used in this Guide

Notifications

ATTENTION: • Risk of property damage.

• Risque de dommages matériels.

NOTE: A note draws attention to important information.

TIP: A tip provides a suggestion to make working with the application easier.

Software Commands

Commands are written in the fonts shown here:

^AR Merge Scene,,Op1 scene 1,1 ̂ B 51 ̂ W^C[01] R 0004 00300 00400 00800 00600 [02] 35 [17] [03]

E X! *X1&* X2)* X2#* X2! CE}NOTE: For commands and examples of computer or device

responses mentioned in this guide, the character “0” is used for the number zero and “O” is the capital letter “o.”

Computer responses and directory paths that do not have variables are written in the font shown here:

Reply from 208.132.180.48: bytes=32 times=2ms TTL=32C:\Program Files\Extron

Variables are written in slanted form as shown here:

ping xxx.xxx.xxx.xxx —tSOH R Data STX Command ETB ETX

Selectable items, such as menu names, menu options, buttons, tabs, and field names are written in the font shown here:

From the File menu, select New.Click the OK button.

Specifications Availability

Product specifications are available on the Extron website, www.extron.com.


DTP CrossPoint 4K Series • Contents vii

Contents

Introduction ................................ 1About this Guide ........................... 1About the DTP CrossPoint 4K Series ........................................... 2

DTP Input and Output Signals ...................................... 3

Installation.................................. 4Rear Panel ..................................... 4

Video Inputs and Outputs ......... 4Audio Inputs and Outputs ......... 7Serial and IR Insertion Connections ............................. 8

Control Connections ................. 9Switcher Reset ........................ 10Power ...................................... 11Additional Connector Information ............................. 11

Front Panel .................................. 16

Front Panel Operations ............. 17Creating a TieRecalling a Preset ....................... 18Viewing Ties ................................ 18Assigning a Logo to an Output ... 19Viewing and Adjusting Volume and Mic Volume ......................... 19

Setting the Front Panel Locks (Executive Modes) ..................... 20

Selecting Lock Mode 2 or Toggling between Mode 2 and Mode 0 ............................ 21

Selecting Lock Mode 2 or Toggling between Mode 2 and Mode 1 ............................ 21

Remote Control ........................ 22Selected SIS Commands ............ 22

Establishing a Network (Ethernet) Connection ............ 22

Number of Connections .......... 23Establishing a USB Port Connection ............................. 23

Host-to-Switcher Instructions ............................. 23

Common SIS Command Symbols ................................. 23

SIS Command and Response Table for Matrix Switcher Commands .............. 24

Installing and Starting the Control Programs ....................... 28

Installing the programs ............ 28Starting the Product Configuration Software .......... 30

Starting the DSP Configurator Program ............ 31

Accessing the HTML Pages ........ 33

viii DTP CrossPoint 4K Series • Contents

DTP CrossPoint 4K Series • Introduction 1

Introduction

This section gives an overview of the Extron DTP CrossPoint 4K Series matrix switchers and describes their features. Topics that are covered include:

• About this Guide

• About the DTP CrossPoint 4K Series

About this Guide

NOTE: For more information on subjects in this guide, see the DTP CrossPoint 4K Series User Guide and the IPCP Pro Series User Guide, at www.extron.com.

This guide provides instructions for an experienced installer to set up and operate the Extron DTP CrossPoint 4K Series matrix switchers. Step by step instructions show you how to:

• Connect the hardware (see Rear Panel on page 4)

• Perform basic operations from the front panel (see Front Panel Operations on page 17)

• Use selected SIS commands (see SIS Command and Response Table for Matrix Switcher Commands on page 24)

• Load and start the control programs (see Starting the Product Configuration Software on page 30 and Starting the DSP Configurator Program on page 31)

• Connect to the built-in HTML pages (see Accessing the HTML pages, on page 33)


2 DTP CrossPoint 4K Series • Introduction

About the DTP CrossPoint 4K Series

The matrix switchers distribute HDCP-compliant HDMI and Extron proprietary DTP video and audio signal types (see figure 1). A matrix switcher routes any input signal to any combination of outputs. It can route multiple input and output configurations simultaneously.

POWER12V

2--A MAX

Rx GTx RxTxG

RS-232 IR

RxTx

1

RGB, Y, R-Y, B-Y HDMI HDMI

SIG LINK

DTP OUT

AUDIO CONTACT RS-232TALLY

3

1 2 3 G 1 2 3 +V

RESET

INPUTS

OVER DTP REMOTE

DTP HDMI 330 Rx

OVER DTP

RS-232 IR

Tx Rx Tx RxG

L R

POWER12V 0.7A MAX

AUDIO

SIG LINK

DTP IN

OUTPUTS

50-60 Hz

100-240V ~--A MAX

1L R

1 2 3 4 5A 6A

XTP

Tx Rx RTS CTSG Tx Rx G Tx Rx G

RS-232 IR

Tx Rx Tx RxG

Tx Rx G

RESET

XTP

DTP

XTP

DTP

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

LAN

AV LAN 2 AV LAN 3

AV LAN 1

DTPHDBT

1 2 3 4 5 7 86

DTP CROSSPOINT 108 4K

4

CLASS 2 WIRING

8 /

R

OVER TP

RE

MO

TE

SIG LINK

IN

SIG LINK

IN

AU

DIO

INP

UT

S

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

CO

NT

RO

L 1 2 3 4 G

DIGITAL I/OCOM 3COM 2COM 1

S

DM

P E

XPA

NS

ION

SG G

11 22 C 3 4 C

INP

UT

S

INP

UT

S

-S G+S+V

PWR OUT = 6W

OU

TP

UT

S

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

XTP

DTP

XTP

DTP

9 10

OVER TPSIG LINK

IN

SIG LINK

IN

RS-232 IR

Tx Rx Tx RxG

1L R

1L R

3L R

3L R

5L R

2L R 4L R 2L R 4L R6L RIR/SERIAL eBUSRELAYS

SIG LINK

OUT

SIG LINK

OUT

5B 6B 6

RS-232 IR

Tx Rx Tx Rx

XTP

S/PDIFOUT

DTPHDBTG

RS-232 IR

Tx Rx Tx RxG

OVER TP

XTP

DTP

HDBT

SIG LINK

OUT

SIG LINK

OUT

7 8

RS-232 IR

Tx Rx Tx Rx

XTP

DTP

HDBT

G

RS-232 IR

Tx Rx Tx RxG

OVER TP

1

OUTPUTS

AUDIO

Tx Rx G Tx Rx

RS-232 IR

OVER DTP

OUTPUTS

AUDIO

Tx Rx G Tx Rx

RS-232 IR

OVER DTP

MODEL 80

FLAT PANEL

Monday, December 16, 2013 7:04 AM

Menu DeleteKey

2ABC

3DEF

6MNO

5JKL

4GHI

9WXYZ

8TUV

0

7PQRS

1

800.633.9876

EndCall Call

Enter

FullScreen

Camera Display Presets

Privacy

NearEnd

ZoomIn

ZoomOut

FarEnd

Contacts

Name + -

Sources

Andrew

Video Window

Beth

Charlie

David

Ervin

Frank

Greg

Harold

Kevin

Mike

Andrew(800) 633 - 9876

1 2 3

ExtronSM 26Surface MountSpeakers

Microphones

Extron DTP T USW 333Transmitter

CATx Cable up to 330' (100 m)

RS-232

Blu-ray Player

Media Player

Display RS-232

RS-232

Relay

HDMI HDMI

HDMI

HDMI IR

IR

Extron DTP HDMI 4K 230 D RxReceiver



Extron DTP HDMI 4K 330 RxReceiver

ProjectorScreen Control

ExtronDTP CrossPoint108 4K IPCP SAScaling Presentation Matrix

Ethernet

Ethernet

Ethernet/PoE

TCP/IPNetwork

ExtronTLP Pro 1220TG12" Tabletop TouchLink Pro Touchpanel

Wireless

Extron Control App

Power Injector

Figure 1. Typical DTP CrossPoint Application

The switchers are available in four matrix sizes (the number of inputs and outputs) and three equipment configurations (differentiated by their audio and control capabilities) for a total of 12 models:

Matrix sizes —

• DTP CrossPoint 108 4K — 10x8 DTP matrix switcher




1

3DTP CrossPoint 4K Series • Introduction

Equipment configurations —

• DTP CrossPoint 4K IPCP SA — Includes a stereo audio amplifier and a built-in Extron IPCP Pro control processor

• DTP CrossPoint 4K IPCP MA — Includes a 70 V mono audio amplifier and a built-in Extron IPCP Pro control processor

• DTP CrossPoint 4K — Unamplified audio outputs only, no IPCP Pro control processor

Depending on the matrix size, two or four video outputs are scalable.

The switchers provide four mono microphone (mic)/line level inputs that can be mixed with or across one or all audio outputs.

The IPCP models also feature the built-in Extron IPCP Pro control processor, which has three local area network (AV LAN) Ethernet ports, RS-232 and IR-based control, relays, and digital I/O controls that can control and monitor a variety of external devices, such as projectors and lights. The non-IPCP model has one Ethernet port.

The matrix switcher can be remotely controlled via an AV LAN port (IPCP models) or LAN port (non-IPCP models), a serial port, or a USB port connection using either the Extron Product Configuration Software, DSP Configurator software, or the Simple Instruction Set (SIS).

DTP Input and Output Signals

The DTP inputs and outputs are proprietary signals that are created within any of the Extron DTP Extenders systems and transmitted over a single shielded twisted pair (STP) or unshielded twisted pair (TP) cable. STP cable is strongly preferred and recommended.

The DTP CrossPoint accepts DTP inputs from transmitting devices such as the DTP T USW 333. Depending on the connected transmitting model, it generates the DTP signal from a variety of video and audio inputs, including HDMI, DVI, analog VGA, and embedded and analog audio. The DTP signal can also include bidirectional RS-232 and IR control signals from the connected transmitting and receiving devices or inserted locally, on the DTP CrossPoint switcher.

Depending on the technology of the transmitting or receiving device, DTP 330 or DTP 230, the TP inputs and outputs can travel up to 330 feet (100 meters) or 230 feet (70 meters) without a loss of signal integrity.

4 DTP CrossPoint 4K Series • Installation

Installation

This section describes installation of the DTP CrossPoint 4K Series including connections and features. Topics that are covered include:

• Rear Panel

• Front Panel

Rear Panel

ATTENTION: • Remove system power before making all connections.

• Débranchez l’alimentation du système avant de faire n’importe quelle connexion.

NOTES:

• The DTP CrossPoint 86 is similar to the DTP CrossPoint 108, (see figure 2, 4, 6, and 8) but with fewer connectors.

• The DTP CrossPoint 82 is similar to the DTP CrossPoint 84, (see figure 3, 5, 7, and 9) but with fewer connectors.

Video Inputs and Outputs

1 2 3 4 5A 6A

XTP

RS-232 IR

Tx Rx Tx RxG

Tx Rx G

RESET

XTP

DTP

XTP

DTP

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

DTPHDBT

1 2 3 4 5 7 86


OVER TP

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

INP

UT

SO

UT

PU

TS

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

XTP

DTP

XTP

DTP

10

OVER TP

RS-232 IR

Tx Rx Tx RxG

1L R

1L R

3L R

3L R

5L R

2L R 4L R 2L R 4L R6L R

REMOTE

LAN

SIG LINK

IN

SIG LINK

IN

INP

UT

S

9SIG LINK

IN

SIG LINK

IN

SIG LINK

OUT

5B 6B 6

RS-232 IR

Tx Rx Tx Rx

XTP

S/PDIFOUT

DTPHDBTG

RS-232 IR

Tx Rx Tx RxG

OVER TP

XTP

DTP

HDBT

7 8

RS-232 IR

Tx Rx Tx Rx

XTP

DTP

HDBT

G

RS-232 IR

Tx Rx Tx RxG

OVER TP

1

CLASS 2 WIRING

70V

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

50-60 Hz

100-240V ~--A MAX


LAN

AV LAN 2 AV LAN 3

AV LAN 1

RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W

IR/SERIAL eBUSRELAYS

A BC BB BC C C

D E E E EF F F F

Figure 2. Video Input and Output Connectors, 10x8 Matrix

A HDMI inputs (see page 5)

B TP (XTP/DTP) switches (see page 5)

C TP inputs (see page 5)

D HDMI outputs (see page 6)

E TP (XTP/HDBT/DTP) switches (see page 6)

F TP outputs (see page 6)

2

5DTP CrossPoint 4K Series • Installation

50-60 Hz

100-240V ~ -- A MAX

1 2

1 2 3 4 5 6

3A 4A 4B 4

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx Rx

XTP RESET

S/PDIFOUT

DTP

XTP

DTP

XTP

DTP

XTP

DTP

+48V

MIC/LINE1 1 3

2 42

3

4

EXP

HDBTHDBT G

7 8

DTP

CR

OSS

POIN

T 84

4K

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

DM

P E

XPA

NS

ION

INP

UTS

OU

TPU

TS

3B

1L R 1

R3

L R 3LL R

5L R


Tx Rx G

REMOTE

AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S

Tx Rx G Tx Rx G 1 2 3 4 G

COM 1 COM 3COM 2 DIGITAL I/O

AV LAN 2

LAN AV LAN 1

IR/SERIAL RELAYS DIGITAL I/O

AV LAN 3

A B CC B

D E EF F

Figure 3. Video Input and Output Connectors, 8x4 Matrix

A HDMI inputs 1 through 6 (see figure 2 on page 4 and figure 3) — Plug HDMI digital video sources (or DVI with appropriate adapters) into these HDMI ports. See HDMI connectors on page 11 to secure the connector to the enclosure with a LockIt HDMI Cable Lacing Bracket.

B TP (XTP/DTP) switches (see figure 2 and figure 3) — XTP

DTP

ATTENTION: • Position this switch BEFORE connecting the

appropriate device to the TP connector. Failure to comply can damage the endpoint.

• Positionnez le sélecteur AVANT de connecter l’appareil approprié au connecteur TP. Ne pas respecter cette procédure pourrait endommager le point de connexion.

The following table identifies the inputs with TP switches by matrix size.

Matrix Inputs Matrix Inputs

10x8 7 through 10 All others 7 and 8

XTP position — Select if the transmitting device is an Extron XTP matrix switcher. The input consists of HDMI with embedded audio plus RS-232 and IR.

DTP position — Select if the transmitting device is an Extron DTP device. The input consists of HDMI with embedded audio, analog audio, and RS-232 and IR. The switcher can provide remote power to the transmitter.

C TP inputs (see figure 2 and figure 3)— Plug SIG LINK

IN

compatible Extron DTP or XTP signals into these RJ-45 ports using TP cables. See TP connectors on page 12 to wire the connectors.

ATTENTION: • Do not connect this port to a computer data or

telecommunications network.

• Ne connectez pas ces port à des données informatiques ou à un réseau de télécommunications.

3


D HDMI outputs (see figure 2 on page 4 and figure 3 on page 5) — Plug HDMI video displays (or DVI with appropriate adapters) into these ports. See HDMI connectors to secure the connectors to the enclosure with a LockIt HDMI Cable Lacing Bracket.

The following table identifies the HDMI outputs by matrix size.

Matrix Outputs Matrix Outputs

10x8 1, 2, 3, 4, 5A, 6A 8x6 1, 2, 3A, 4A

8x4 1, 2, 3A, 4A 8x2 1A, 2A

NOTE: The signal output on the nA HDMI output (such as 5A) is duplicated on TP output nB (such as 5B).

E TP (XTP/HDBT/DTP) switches (see figure 2 and figure 3) — XTP

DTP HDBTATTENTION: • Position this switch BEFORE connecting the

appropriate device to the TP connector. Failure to comply can damage the endpoint.

• Positionnez le sélecteur AVANT de connecter l’appareil approprié au connecteur TP. Ne pas respecter cette procédure pourrait endommager le point de connexion.

The following table identifies the outputs with TP switches by matrix size.


10x8 5B, 6B, 7, 8 8x6 3B, 4B, 5, 6

8x4 3B, 4B 8x2 1B, 2B

XTP position — Select if the receiving device is an Extron XTP matrix switcher. The TP output consists of HDMI with embedded audio plus RS-232 and IR.

HDBT position — Select if the receiving device is a HDBaseT-enabled device. The TP output consists of HDMI with embedded audio plus RS-232 and IR.

DTP position — Select if the receiving device is an Extron DTP device. The TP output consists of HDMI with embedded audio, analog audio, RS-232 and IR, and remote power.

F TP outputs (see figure 2 and figure 3) — Plug SIG LINK

OUT

compatible Extron DTP receivers, XTP matrix switchers, or HDBaseT-enabled devices into these RJ-45 ports using TP cables. See TP connectors on page 12 to wire the connector.

NOTE: The signal output on the nB TP output (such as 5B) is duplicated on HDMI output nA (such as 5A).


Audio Inputs and Outputs

1 2 3 4 5A 6A

XTP

XTP

DTP

XTP

DTP

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

DTPHDBT

1 2 3 4 5 7 86


SA Model

AU

DIO

OU

TP

UT

S

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

INP

UT

S

INP

UT

S

OU

TP

UT

S

XTP

DTP

XTP

DTP

9 10

1L R

1L R

3L R

3L R

5L R


SIG LINK

OUT

5B 6B 6

XTP

S/PDIFOUT

DTPHDBT

Tx

XTP

DTP

HDBT

7 8

XTP

DTP

HDBT

Tx Rx G

RESET

REMOTE

LAN

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

50-60 Hz

100-240V ~--A MAX

AM

P O

UT

PU

T

CLASS 2 WIRING

1L R

48 /


LAN

AV LAN 2 AV LAN 3

AV LAN 1

RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


G HI J K

M

N

Figure 4. Audio Input and Output Features, 10x8 Matrix

50-60 Hz

100-240V ~ -- A MAX

1 2

1 2 3 4 5 6

3A 4A 4B

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx Rx

XTP RESET

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT G

7 8

DTP

CR

OSS

POIN

T 84

4K

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

INP

UTS

OU

TPU

TS

3B

Tx Rx G

REMOTESIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

KEXP

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

DM

P E

XPA

NS

ION

1L R 1

L R3

L R 3L R

5L R


4

S/PDIFOUT

CLASS 2 WIRING

1

70V

MA Model

AM

P O

UTP

UT

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

LAN AV LAN 1


AV LAN 3

G JHIN

M L

Figure 5. Audio Input and Output Features, 8x4 Matrix

G Audio inputs 1 through 6 (see figure 4 and figure 5) — L R

Plug balanced or unbalanced stereo audio inputs into these 3.5 mm, 5-pole captive screw connectors (see Local and Mic/Line audio connectors on page 14 to wire the connectors).

H Mic/Line inputs 1 through 4 (see figure 4 and figure 5) — Plug microphones or other mono audio sources into these 3.5 mm, 3-pole captive screw connectors (see Local and Mic/Line audio connectors to wire the connectors).

I +48 V (phantom power) LEDs (see figure 4 and figure 5) — +48V

1

2

Light to indicate +48 V phantom power is switched on via software.

J Audio outputs (see figure 4 and figure 5) — Plug audio L R

devices such as an audio amplifier or powered speakers to these 3.5 mm, 5-pole captive screw connectors (see Local and Mic/Line audio connectors to wire the connectors).

The following table identifies the audio outputs by matrix size.


8x2 1, 2 All others 1, 2, 3, 4

4

5


K Amp output 1 (SA [stereo] model, see figure 4 on page 7 ) — Plug passive, 4 ohm or 8 ohm speakers to this 1

L R

4

CLASS 2 WIRING

8 / 5 mm, 4-pole captive screw connector to receive the amplified audio from output 1.

L Amp output 1 (MA [mono] model, see figure 5 on page 7) — Plug passive high-impedance speakers to this 2-pole 1

CLASS 2 WIRING

70V captive screw connector to receive the amplified audio from output 1.

M S/PDIF output (see figure 4 and figure 5) — Plug a S/PDIF

OUT compatible device into this RCA connector with a 75 ohm digital audio cable to receive a digital audio signal from the HDMI output digital stream.

The following table identifies the HDMI audio output on the S/PDIF output by matrix size.

Matrix Output Matrix Output

10x8 6 8x2 2

8x6, 8x4 4

N DMP Expansion port and LED (see figure 4 and figure 5)— Expansion Port — Plug an STP cable between this

EXP

LIN

K

port and the Expansion port on an optional Extron DMP 128 ProDSP Digital Matrix Processor.

Link LED — Lights to indicate that the port is connected to a compatible device.

Serial and IR Insertion Connections

RS-232 IR

Tx Rx Tx RxG


OVER TP

INP

UT

S

INP

UT

S

OU

TP

UT

S

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

HDBT

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

Tx Rx G

RESET

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

1L R

1L R

3L R

3L R

5L R


REMOTE

LAN

1

CLASS 2 WIRING

70V

1 2 3 4 5A 6A

XTP

DTPHDBT

SIG LINK

OUT

5B 6B

XTP

DTPHDBT

SIG LINK

OUT

6S/PDIF

OUTXTP

DTP

7

SIG LINK

OUT

8

XTP

DTP

HDBT

SIG LINK

OUT

XTP

DTP

8

XTP

DTP

9SIG LINK

IN

SIG LINK

IN

XTP

DTP

10SIG LINK

IN

XTP

DTP

7SIG LINK

IN

1 2 3 4 5 6

50-60 Hz

100-240V ~--A MAX


LAN

AV LAN 2 AV LAN 3

AV LAN 1

RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


O

P P

O

Figure 6. Serial and IR Insertion Connections, 10x8 Matrix

6

50-60 Hz

100-240V ~ -- A MAX

1 2

1 2 3 4 5 6

3A 4A 4B

XTP RESET

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT

7 8

DTP

CR

OSS

POIN

T 84

4K

INP

UTS

OU

TPU

TS

3B

Tx Rx G

REMOTESIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

4

S/PDIFOUT

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

RS-232 IR

+48V

MIC/LINE1 1 3

2 42

3

4

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

1L R 1

R3

L R 3LL R

5L R


EXP

DM

P E

XPA

NS

ION

AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

LAN AV LAN 1


AV LAN 3

O

P


O Over TP ports (inputs 7 through 10, see figure 6 on RS-232 IR

Tx Rx Tx RxG

page 8 and figure 7) — Plug serial RS-232 signals, modulated IR signals, or both into these 3.5 mm, 5-pole captive screw connectors to insert bidirectional RS-232 and IR communications. See RS-232 and IR connectors on page 15 to wire the connectors.

The following table identifies the Over TP inputs by matrix size.



P Over TP ports (outputs 5B, 6B, 7, and 8, see figure 6 RS-232 IR

Tx Rx Tx RxG

and figure 7) — Plug signals, modulated IR signals, or both into these serial RS-232 3.5 mm, 5-pole captive screw connectors to insert bidirectional RS-232 and IR communications. See RS-232 and IR connectors to wire the connectors.

The following table identifies the Over TP outputs by matrix size.


10x8 5B, 6B, 7, 8 8x6 3B, 4B, 5, 6

8x4 3B, 4B 8x2 1B, 2B

Control Connections


Tx Rx G

LAN

AV LAN 2 AV LAN 3

AV LAN 1


RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


REMOTE

LAN

RESET

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

1L R

1L R

3L R

3L R

5L R


1

CLASS 2 WIRING

70V

1 2 3 4 5A 6A

XTP

DTPHDBT

OU

TP

UT

S

SIG LINK

OUT

5B 6B 6

XTP

S/PDIFOUT

DTPHDBT

Tx

XTP

DTP

HDBT

7 8

XTP

DTP

HDBT

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TPSIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

XTP

DTP

XTP

DTP

1 2 3 4 5 7 86

INP

UT

S

INP

UT

S

XTP

DTP

XTP

DTP

9 10

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN50-60 Hz

100-240V ~--A MAX

QR S

Figure 8. IPCP Control Processor and Remote Port, 10x8 Matrix

7

8


50-60 Hz

100-240V ~ -- A MAX

1 2

1 2 3 4 5 6

3A 4A 4B

XTP RESET

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT

7 8

DTP

CR

OSS

POIN

T 84

4K

INP

UTS

OU

TPU

TS

3B

Tx Rx G

REMOTESIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

4

S/PDIFOUT

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

RS-232 IR

+48V

MIC/LINE1 1 3

2 42

3

4

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

1L R 1

R3

L R 3LL R

5L R


EXP

DM

P E

XPA

NS

ION

AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

LAN AV LAN 1


AV LAN 3

O

P


O Over TP ports (inputs 7 through 10, see figure 6 on RS-232 IR

Tx Rx Tx RxG

page 8 and figure 7) — Plug serial RS-232 signals, modulated IR signals, or both into these 3.5 mm, 5-pole captive screw connectors to insert bidirectional RS-232 and IR communications. See RS-232 and IR connectors on page 15 to wire the connectors.

The following table identifies the Over TP inputs by matrix size.



P Over TP ports (outputs 5B, 6B, 7, and 8, see figure 6 RS-232 IR

Tx Rx Tx RxG

and figure 7) — Plug signals, modulated IR signals, or both into these serial RS-232 3.5 mm, 5-pole captive screw connectors to insert bidirectional RS-232 and IR communications. See RS-232 and IR connectors to wire the connectors.

The following table identifies the Over TP outputs by matrix size.


10x8 5B, 6B, 7, 8 8x6 3B, 4B, 5, 6

8x4 3B, 4B 8x2 1B, 2B

Control Connections


Tx Rx G

LAN

AV LAN 2 AV LAN 3

AV LAN 1


RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


REMOTE

LAN

RESET

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

1L R

1L R

3L R

3L R

5L R


1

CLASS 2 WIRING

70V

1 2 3 4 5A 6A

XTP

DTPHDBT

OU

TP

UT

S

SIG LINK

OUT

5B 6B 6

XTP

S/PDIFOUT

DTPHDBT

Tx

XTP

DTP

HDBT

7 8

XTP

DTP

HDBT

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TPSIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

XTP

DTP

XTP

DTP

1 2 3 4 5 7 86

INP

UT

S

INP

UT

S

XTP

DTP

XTP

DTP

9 10

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN50-60 Hz

100-240V ~--A MAX

QR S


7

8


50-60 Hz

100-240V ~ -- A MAX

+48V

MIC/LINE1 1 3

2 42

3

4

EXP

DTP

CR

OSS

POIN

T 84

4K

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

DM

P E

XPA

NS

ION

1L R 1

R3

L R 3LL R

5L R


AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

1 2

1 2 3 4 5 6

3A 4A 4B

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx Rx

XTP

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT G

7 8

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

INP

UTS

OU

TPU

TS

3B

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

4

S/PDIFOUT

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

AV LAN 1

AV LAN 3

LAN


Tx Rx G

REMOTE

LAN

RESET

S RQ


NOTE: Figure 8 on page 9 and figure 9 show features for all models. Actual models can have either a LAN port (Q) or a control processor (R), but not both.

Q LAN (Ethernet) port (non-IPCP model) — If desired,

LAN

connect a network WAN or LAN hub, a control system, or a computer to the Ethernet RJ-45 port (see TP connectors on page 12 to wire the connector).

NOTE: The factory default IP address is 192.168.254.254.

R IPCP control processor (IPCP models) — The IPCP models include a built-in control processor that can control and monitor a variety of external devices. The IPCP offers RS-232 and IR-based control, relays, and digital I/O controls.

NOTE: For more information on the IPCP module used in this product, download the IPCP Pro Series User Guide, available at www.extron.com.

S Remote port — Plug a serial RS-232 device into the Tx Rx G

REMOTE matrix switcher via this 3.5 mm, 3-pole captive screw connector for remote control of the switcher (see RS-232 and IR connectors on page 15 to wire the connector).

Switcher Reset

50-60 Hz

100-240V ~--A MAX

RESET


EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

1L R

1L R

3L R

3L R

5L R


1

CLASS 2 WIRING

70V

1 2 3 4 5A 6A

XTP

DTPHDBT

OU

TP

UT

S

SIG LINK

OUT

5B 6B 6

XTP

S/PDIFOUT

DTPHDBT

Tx

XTP

DTP

HDBT

7 8

XTP

DTP

HDBT

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TPSIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

XTP

DTP

XTP

DTP

1 2 3 4 5 7 86

INP

UT

S

INP

UT

S

XTP

DTP

XTP

DTP

9 10

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

Tx Rx G

REMOTE

LAN


LAN

AV LAN 2 AV LAN 3

AV LAN 1

RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


T

Figure 10. Reset button and LED

50-60 Hz

100-240V ~ -- A MAX

+48V

MIC/LINE1 1 3

2 42

3

4

EXP

DTP

CR

OSS

POIN

T 84

4K

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

DM

P E

XPA

NS

ION

1L R 1

R3

L R 3LL R

5L R


AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

1 2

1 2 3 4 5 6

3A 4A 4B

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx Rx

XTP

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT G

7 8

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

INP

UTS

OU

TPU

TS

3B

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

4

S/PDIFOUT

Tx Rx G

REMOTE

RESET

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

LAN AV LAN 1


AV LAN 3

T


9

10

11

http://www.extron.com/product/product.aspx?id=ipcppro350


50-60 Hz

100-240V ~ -- A MAX

+48V

MIC/LINE1 1 3

2 42

3

4

EXP

DTP

CR

OSS

POIN

T 84

4K

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

DM

P E

XPA

NS

ION

1L R 1

R3

L R 3LL R

5L R


AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

1 2

1 2 3 4 5 6

3A 4A 4B

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx Rx

XTP

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT G

7 8

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

INP

UTS

OU

TPU

TS

3B

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

4

S/PDIFOUT

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

AV LAN 1

AV LAN 3

LAN


Tx Rx G

REMOTE

LAN

RESET

S RQ


NOTE: Figure 8 on page 9 and figure 9 show features for all models. Actual models can have either a LAN port (Q) or a control processor (R), but not both.

Q LAN (Ethernet) port (non-IPCP model) — If desired,

LAN

connect a network WAN or LAN hub, a control system, or a computer to the Ethernet RJ-45 port (see TP connectors on page 12 to wire the connector).


R IPCP control processor (IPCP models) — The IPCP models include a built-in control processor that can control and monitor a variety of external devices. The IPCP offers RS-232 and IR-based control, relays, and digital I/O controls.

NOTE: For more information on the IPCP module used in this product, download the IPCP Pro Series User Guide, available at www.extron.com.

S Remote port — Plug a serial RS-232 device into the Tx Rx G

REMOTE matrix switcher via this 3.5 mm, 3-pole captive screw connector for remote control of the switcher (see RS-232 and IR connectors on page 15 to wire the connector).

Switcher Reset

50-60 Hz

100-240V ~--A MAX

RESET


EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

1L R

1L R

3L R

3L R

5L R


1

CLASS 2 WIRING

70V

1 2 3 4 5A 6A

XTP

DTPHDBT

OU

TP

UT

S

SIG LINK

OUT

5B 6B 6

XTP

S/PDIFOUT

DTPHDBT

Tx

XTP

DTP

HDBT

7 8

XTP

DTP

HDBT

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TPSIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

XTP

DTP

XTP

DTP

1 2 3 4 5 7 86

INP

UT

S

INP

UT

S

XTP

DTP

XTP

DTP

9 10

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

Tx Rx G

REMOTE

LAN


LAN

AV LAN 2 AV LAN 3

AV LAN 1

RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


T


50-60 Hz

100-240V ~ -- A MAX

+48V

MIC/LINE1 1 3

2 42

3

4

EXP

DTP

CR

OSS

POIN

T 84

4K

AU

DIO

OU

TPU

TS

AU

DIO

INP

UTS

DM

P E

XPA

NS

ION

1L R 1

R3

L R 3LL R

5L R


AM

P O

UTP

UT

CLASS 2 WIRING

1

100V

1 2

1 2 3 4 5 6

3A 4A 4B

RS-232 IR

RS-232 IR

Tx Rx Tx RxG

Tx Rx Tx Rx

XTP

DTP

XTP

DTP

XTP

DTP

XTP

DTP

HDBTHDBT G

7 8

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

OVER TP

INP

UTS

OU

TPU

TS

3B

SIG LINK

OUT

SIG LINK

OUT

SIG LINK

IN

SIG LINK

IN

4

S/PDIFOUT

Tx Rx G

REMOTE

RESET

RCO

NTR

OL

Tx Rx RTSCTSG

1 21 2

S GS G

C 3 4 C +V

PWR OUT = 6W

+V D -S +S



AV LAN 2

LAN AV LAN 1


AV LAN 3

T


9

10

11

T Switcher Reset button and LED (see figure 10 and figure 11 on page 10) — Initiates four levels of matrix switcher reset. For different reset levels, press and hold the recessed Reset button while the switcher is running or while you power up the switcher (see the DTP CrossPoint 4K Series User Guide, at www.extron.com).

NOTE: The factory configured passwords for all accounts on this device have been set to the device serial number. In the event of a complete system reset, the passwords convert to the default, which is no password.

Power

50-60 Hz

100-240V ~--A MAX


Tx Rx G

RESET

EXP

+48V

MIC/LINE1 1 3

2 42

3

4

LIN

K

AU

DIO

OU

TP

UT

S

AM

P O

UT

PU

T

AU

DIO

INP

UT

S

DM

P E

XPA

NS

ION

1L R

1L R

3L R

3L R

5L R


REMOTE

LAN

1

CLASS 2 WIRING

70V

1 2 3 4 5A 6A

XTP

DTPHDBT

OU

TP

UT

S

SIG LINK

OUT

5B 6B 6

XTP

S/PDIFOUT

DTPHDBT

Tx

XTP

DTP

HDBT

7 8

XTP

DTP

HDBT

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TPSIG LINK

OUT

SIG LINK

OUT

SIG LINK

OUT

XTP

DTP

XTP

DTP

1 2 3 4 5 7 86

INP

UT

S

INP

UT

S

XTP

DTP

XTP

DTP

9 10

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

RS-232 IR

Tx Rx Tx RxG

OVER TP

RS-232 IR

Tx Rx Tx RxG

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN

SIG LINK

IN


LAN

AV LAN 2 AV LAN 3

AV LAN 1

RCO

NT

RO

L 1 2 3 4 G


S SG G

11 22 C 3 4 C -S G+S+V

PWR OUT = 6W


U

Figure 12. Power connector

U Power connector — Plug the switcher into a grounded AC source.

Additional Connector Information

HDMI connectors

Use a LockIt Lacing Bracket to securely fasten each HDMI cable to the switcher as follows:

1. Plug the HDMI cable into the panel connection (see figure 13,

1).

3

333

111

444

555222

Figure 13. LockIt Lacing Bracket

2. Loosen the HDMI connection mounting screw from the panel enough to allow the LockIt Lacing Bracket to be placed over it (2). The screw does not have to be removed.

12

13




3. Place the LockIt Lacing Bracket on the screw and against the HDMI connector (see figure 13, 3, on page 11), and then tighten the screw to secure the bracket.

ATTENTION: • Do not overtighten the HDMI connector mounting screw.

The shield it fastens to is very thin and can easily be stripped.

• Ne serrez pas trop la vis de montage du connecteur HDMI. Le blindage auquel elle est attachée est très fin et peut facilement être dénudé

4. Loosely place the included tie wrap around the HDMI connector and the LockIt Lacing Bracket (4).

5. While holding the connector securely against the lacing bracket, use pliers or a similar tool to tighten the tie wrap (5), and then remove any excess length.

TP connectors

All RJ-45 ports, whether DTP ports, the Expansion port, and the LAN (Ethernet) ports on the switcher or IPCP control processor use twisted pair cables (see figure 14).

A cable that is wired as T568A at one endand T568B at the other (Tx and Rx pairsreversed) is a "crossover" cable.

A cable that is wired the same at both ends iscalled a "straight-through" cable, becauseno pin/pair assignments are swapped.

12345678

RJ-45Connector

Insert TwistedPair Wires

Pins: Crossover Cable Straight-through Cable

Pin

1

2

3

4

5

6

7

8

Wire color

White-green

Green

White-orange

Blue

White-blue

Orange

White-brown

Brown

Wire color

T568A T568B

End 1 End 2 End 1 End 2

White-orange

Orange

White-green

Blue

White-blue

Green

White-brown

Brown

Pin

1

2

3

4

5

6

7

8

Wire color

White-orange

White-green

Blue

White-blue

White-brown

Brown

Wire color

T568BT568B

White-orange

OrangeOrange

White-green

Blue

White-blue

GreenGreen

White-brown

Brown

Figure 14. RJ-45 Connector and Pinout Tables

• Patch (straight) cable —

• DTP input and output ports — Shielded twisted pair (STP) (preferred) or unshielded TP for connection to Extron DTP transmitters and receivers, XTP matrix switchers, or HDBaseT-enabled devices.

• Expansion port — STP for connection between the matrix switcher and a DMP 128. A shielded 1-foot cable is included with the DMP 128.

• AV LAN and LAN ports — Unshielded twisted pair (UTP) or STP for connection of the LAN port to an Ethernet LAN.

14


• Crossover cable (see figure 14 on page 12) —

• AV LAN and LAN ports — UTP or STP for direct connection between the switcher and a connected computer.

NOTES:• Do not use standard telephone cables. Telephone cables do

not support Ethernet or Fast Ethernet.• Do not stretch or bend cables. Transmission errors can

occur.

AV LAN and LAN ports

The AV LAN and LAN ports require Category (CAT) 3, CAT 5e, or CAT 6a unshielded twisted pair (UTP) or shielded twisted pair (STP) cables, crossover or patch cables.

The cable used depends on your network speed. The switcher LAN port supports both 10 Mbps (10Base-T — Ethernet) and 100 Mbps (100Base-T — Fast Ethernet), half-duplex and full-duplex Ethernet connections.

• 10Base-T Ethernet requires CAT 3 UTP or STP cable at minimum.

• 100Base-T Fast Ethernet requires CAT 5e UTP or STP cable at minimum.

For ports on an IPCP module, see the IPCP Pro Series User Guide at www.extron.com to make all network connections and to configure and operate the IPCP control processor.

DTP and Expansion ports

The DTP input and output ports are compatible with Extron XTP DTP 24 SF/UTP cables or shielded twisted pair (F/UTP, SF/UTP, and S/FTP) cable. The Expansion port requires CAT 5e, 6, 6a, or 7 shielded twisted pair cable.

For the Expansion port only —

ATTENTION: • Connect this port to the Expansion port on a compatible

Extron DMP processor. Do NOT connect this port to a LAN or Power over Ethernet port; equipment damage can occur.

• Connectez ce port au port d’expansion sur un processeur DMP d’Extron compatible. Ne connectez PAS ce port à un port LAN ou d’alimentation via Ethernet ; le matériel pourrait être endommagé.



For the DTP ports only —

Extron recommends the following practices to achieve full transmission distances up to 330 feet (100 m) and reduce transmission errors.

Use the following Extron XTP DTP 24 SF/UTP cables and connectors for the best performance:

XTP DTP 24/1000 Non-Plenum 1000' (305 m) spool 22-236-03

XTP DTP 24P/1000 Plenum 1000' (305 m) spool 22-235-03

XTP DTP 24 Plug Package of 10 101-005-02

ATTENTION: • Do not connect these boards to a computer data or

telecommunications network.

• Ne connectez pas ces port à des données informatiques ou à un réseau de télécommunications.

• Do not use Extron UTP23SF-4 Enhanced Skew-Free AV UTP cable or STP201 cable to link the matrix switcher to Extron DTP products, XTP matrix switchers, or HDBaseT-enabled devices.

• N'utilisez pas le câble AV Skew-Free UTP version améliorée UTP23SF-4 ou le câble STP201 pour relier la grille de commutation à des produits DTP, à des grilles de commutation XTP ou à des appareils équipés HDBaseT Extron.

• To ensure FCC Class A and CE compliance, STP cables and STP connectors are required.

• Afin de s’assurer de la compatibilité entre FCC Classe A et CE, les câbles STP et les connecteurs STP sont nécessaires.

NOTE: When using cable in bundles or conduits, consider the following:

• Do not exceed 40% fill capacity in conduits.

• Do not comb the cable for the first 20 meters, where cables are straightened, aligned, and secured in tight bundles.

• Loosely place cables and limit the use of tie wraps or hook and loop fasteners.

• Separate twisted pair cables from AC power cables.

Local and Mic/Line audio connectors

Figure 15 shows how to wire each audio type. Use the supplied tie-wrap to strap the cable to the extended tail of the connector.

Unbalanced Stereo Output Balanced Stereo Output

Unbalanced Stereo Input Balanced Stereo InputDo not tin the wires!

Tip

No Ground Here

No Ground Here

Tip

LR

Sleeves

TipRing

TipRing

LR

Sleeves

TipRing

TipRing

LR

SleevesTip

Sleeve

SleeveTip

LR

Tip (+)

JumperGnd (Sleeve, )

Tip (+)Ring (–)

Gnd (Sleeve, )

Unbalanced Mono (Mic) Input Balanced Mono (Mic) Input

Figure 15. Audio Input and Output Connector Wiring

ATTENTION: • For unbalanced audio, connect the sleeves to the ground

contact. DO NOT connect the sleeves to the negative (-) contacts.

• Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne PAS connecter les manchons aux contacts négatifs (–).

NOTES:

• The length of exposed wires is important. The ideal length is 3/16 inch (5 mm).

• If the stripped section of wire is longer than 3/16 inch, the exposed wires may touch, causing a short circuit.

• If the stripped section of wire is shorter than 3/16 inch, wires can be easily pulled out even if tightly fastened.

• Do not tin the power supply leads. Tinned wires are not as secure in the connector and could be pulled out.

15


NOTE: When using cable in bundles or conduits, consider the following:

• Do not exceed 40% fill capacity in conduits.

• Do not comb the cable for the first 20 meters, where cables are straightened, aligned, and secured in tight bundles.

• Loosely place cables and limit the use of tie wraps or hook and loop fasteners.

• Separate twisted pair cables from AC power cables.

Local and Mic/Line audio connectors

Figure 15 shows how to wire each audio type. Use the supplied tie-wrap to strap the cable to the extended tail of the connector.

Unbalanced Stereo Output Balanced Stereo Output

Unbalanced Stereo Input Balanced Stereo InputDo not tin the wires!

Tip

No Ground Here

No Ground Here

Tip

LR

Sleeves

TipRing

TipRing

LR

Sleeves

TipRing

TipRing

LR

SleevesTip

Sleeve

SleeveTip

LR

Tip (+)

JumperGnd (Sleeve, )

Tip (+)Ring (–)

Gnd (Sleeve, )

Unbalanced Mono (Mic) Input Balanced Mono (Mic) Input

Figure 15. Audio Input and Output Connector Wiring

ATTENTION: • For unbalanced audio, connect the sleeves to the ground

contact. DO NOT connect the sleeves to the negative (-) contacts.

• Pour l’audio asymétrique, connectez les manchons au contact au sol. Ne PAS connecter les manchons aux contacts négatifs (–).

NOTES:

• The length of exposed wires is important. The ideal length is 3/16 inch (5 mm).

• If the stripped section of wire is longer than 3/16 inch, the exposed wires may touch, causing a short circuit.

• If the stripped section of wire is shorter than 3/16 inch, wires can be easily pulled out even if tightly fastened.

• Do not tin the power supply leads. Tinned wires are not as secure in the connector and could be pulled out.

15


RS-232 and IR connectors

Figure 16 shows how to wire the RS-232 and IR connector.

Tx/RxPins

Rx Tx

Tx Rx

Gnd

Gnd

RS-232 Device

IR Device

RS-232 IR

TxR

xTx

Rx

G

TxGnd

RS-232 DeviceRx

TxR

xG

RE

MO

TE

OV

ER

TP

Figure 16. RS-232 and IR Connector Wiring

NOTE: The length of exposed wires is important (see the audio connectors NOTES above for more information).

Front Panel

DTP CROSSPOINT 4K SERIESDIGITAL PRESENTATION MATRIX

CONFIGVOLUME

CONTROL

MIC VOLUME

I/O

AUDIOVIDEOENTER PRESET VIEW ESC

RTS

CTS

Tx

RxOVER

LIMITS

1 2 3 2

1

3 4

1 2

3

1

4

2

eBUS

COM

IR/S I/O RELAYS

A

Figure 17. Front Panel Configuration Port

A Configuration port — This USB mini-B port serves a similar communications function as the rear panel Remote port, but it is easier to access than the rear port after the matrix switcher has been installed and cabled.

NOTE: A front panel Configuration port connection and a rear panel Remote port connection can both be active at the same time. If commands are sent simultaneously to both, the command that reaches the processor first is handled first.

16

17

DTP CrossPoint 4K Series • Front Panel Operations 17

Front Panel Operations

This section describes simple DTP CrossPoint matrix switcher operation from the front panel. Topics that are covered include:

• Creating a Tie

• Recalling a Preset

• Viewing Ties

• Assigning a Logo to an Output

• Viewing and Adjusting Volume and Mic Volume

• Setting the Front Panel Locks (Executive Modes)

Creating a Tie

NOTES:

• "Tie" is an input-to-output connection.

• "Set of ties" is an input tied to two or more outputs (an output can never be tied to more than one input.)

• "Configuration" is one or more ties, one or more sets of ties, or a combination.

1. Press and release the Esc button to clear any input button, output button, or control button indicators that may be lit.

2. Press and release the Video and Audio I/O buttons to select or deselect video, audio, or both as desired.

I / O

VIDEO AUDIOGreen when selectedOff when deselected

Red when selectedOff when deselected

NOTE: Audio or video can be broken away (tied by itself) by selecting only the Video button or only the Audio button.

3. Press and release the desired input button.

5

The button lights to indicate the selection.

RS-232 and IR connectors

Figure 16 shows how to wire the RS-232 and IR connector.

Tx/RxPins

Rx Tx

Tx Rx

Gnd

Gnd

RS-232 Device

IR Device

RS-232 IR

TxR

xTx

Rx

G

TxGnd

RS-232 DeviceRx

TxR

xG

RE

MO

TE

OV

ER

TP

Figure 16. RS-232 and IR Connector Wiring

NOTE: The length of exposed wires is important (see the audio connectors NOTES above for more information).

Front Panel

DTP CROSSPOINT 4K SERIESDIGITAL PRESENTATION MATRIX

CONFIGVOLUME

CONTROL

MIC VOLUME

I/O


RTS

CTS

Tx

RxOVER

LIMITS

1 2 3 2

1

3 4

1 2

3

1

4

2

eBUS

COM

IR/S I/O RELAYS

A

Figure 17. Front Panel Configuration Port

A Configuration port — This USB mini-B port serves a similar communications function as the rear panel Remote port, but it is easier to access than the rear port after the matrix switcher has been installed and cabled.

NOTE: A front panel Configuration port connection and a rear panel Remote port connection can both be active at the same time. If commands are sent simultaneously to both, the command that reaches the processor first is handled first.

16

17

18 DTP CrossPoint 4K Series • Front Panel Operations

4. Press and release the desired output buttons.

3 4 ENTER8

Amber indicates video and audio tie.Green indicates video only tie.Red indicates audio only tie.

Green indicates the need to confirm the change.

5. Press and release the Enter button. All button indicators turn off.

Recalling a Preset

A "preset" is a configuration of ties and DSP audio settings that has been stored using the DSP Configurator or Product Configuration Software. Presets 1 through 18 (10x8 and 8x6 matrix sizes) or 12 (8x4 and 8x2 matrix sizes) are selectable from the front panel, using the input and output buttons.

1. Press and release the Preset button.

PRESET PRESET

1 2 3 4 5 6 7

The Preset button lights.Press and release.

All input and output buttons with assigned presets light red.

2. Press and release the input or output button for the desired preset.

1 ENTER

The button blinks red to indicate that this preset is selected to recall.

The Enter button blinks red to indicate the need to activate the recall.

3. Press and release the Enter button.

Viewing Ties

1. Press the View button. Output buttons light for outputs that have no ties established.

2. Press an input button. The buttons for all tied outputs light.

3. Press an output button. The buttons for the tied input and all tied outputs light.

4. Press the View button again to exit View mode. All inputs and output buttons return to an unlit state.

19DTP CrossPoint 4K Series • Front Panel Operations

Assigning a Logo to an Output

The switcher can display a logo on one or more of the scaled outputs.

The following table identifies the TP outputs by matrix size.


10x8 5 through 8 8x6 3 through 6

8x4 3 and 4 8x2 1 and 2

NOTES:• The switcher has memory space for 16 bit-mapped logo files.

• Logos are created and saved using the Product Configuration Software (see installing and Starting the Control Programs) on page 28 and the PCS Help file).

1. Press and release the Logo Select button.

SELECT SELECT

1 2 3 4 5 6 7

LOGOLOGO

The button lights.Press and release.

Lit input buttons identify saved logo files.INPUTS

2. Press and release the input button for the desired logo file.

3

The button blinks to indicate the selection.

3. Press and release one or more output buttons to assign the logo to those outputs.

5 6 ENTER

The buttons indicate the selection.

Blinking indicates the need to confirm the assignment.

4. Press and release the Enter button.

Viewing and Adjusting Volume and Mic Volume

Rotate the applicable knob clockwise VOLUMEMIC VOLUME to increase the program volume or mic volume. Rotate the knob counterclockwise to decrease volume.

The LED ladder indicates the approximate volume; the more LEDs are lit, the higher the volume.

20 DTP CrossPoint 4K Series • Front Panel Operations

Setting the Front Panel Locks (Executive Modes)

The matrix switcher has three levels of front panel security lock that limit the operation of the switcher from the front panel. The three levels are:

• Lock mode 0 — The front panel is completely unlocked.

• Lock mode 1 — All functions are locked from the front panel (except for setting Lock mode 2). Some functions can be viewed.

• Lock mode 2 — Basic functions are unlocked. Advanced functions are locked and can be viewed only.

The basic functions unlocked in mode 2 consist of:

• Making ties

• Recalling presets

• Setting audio volume

• Changing Lock modes

The switcher is shipped from the factory in Lock mode 2.

21DTP CrossPoint 4K Series • Front Panel Operations

Selecting Lock Mode 2 or Toggling between Mode 2 and Mode 0

NOTES:

• If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The Esc, Video, and Audio buttons blink twice.

• If the switcher is in Lock mode 2, this procedure selects mode 0 (unlocks the switcher). The Video and Audio buttons blink twice.

Toggle the lock on or off by pressing and holding the Enter, Video, and Audio buttons simultaneously until the buttons blink (approximately 2 seconds).

Lock mode 2

Lock mode 0

CONTROL I/O

AUDIOVIDEO

I/O


CONTROL I/O


CONTROL I/O


Press and hold for 2 seconds.


Selecting Lock Mode 2 or Toggling between Mode 2 and Mode 1

NOTES:

• If the switcher is in Lock mode 0 or mode 1, this procedure selects mode 2. The Esc, Video, and Audio buttons blink twice.

• If the switcher is in Lock mode 2, this procedure selects mode 1. The Video and Audio buttons blink twice.

Toggle the lock on and off by pressing and holding the Video button and the Audio button simultaneously for approximately 2 seconds.

Lock mode 1 Lock mode 2I/O

AUDIOVIDEO

I/O

AUDIOVIDEO

CONTROL I/O


I/O

AUDIOVIDEO



22 DTP CrossPoint 4K Series • Remote Control

Remote Control

This section describes using the remote control features of the DTP CrossPoint 4K Series. Topics that are covered include:

• Selected SIS Commands

• Installing and Starting the Control Programs

• Accessing the HTML Pages

Selected SIS Commands

You can use SIS commands for operation and configuration of the switchers (see SIS Command and Response Table for Matrix Switcher Commands on page 24). You can run these commands from the PC connected to an AV LAN port (IPCP models) or the LAN port (non-IPCP models) (R or Q on page 10), serial port (S on page 10), or USB port (A on page 16).

Establishing a Network (Ethernet) Connection

NOTE: The first time you connect to the switcher via the LAN port, you may need to change the default settings (IP address, subnet mask, user name, and administrator or user password) of the IPCP controller or switcher.

Establish a network connection as follows:

1. Open a TCP socket to port 23 using the switcher IP address.


The switcher responds with a copyright message including the name, firmware version, and part number of the product, and the current date and time.

NOTES:• If the switcher is not password-protected, the device is

now ready to accept SIS commands.• If the switcher is password-protected, a Password

prompt appears.• The factory configured passwords for all accounts on

this device have been set to the device serial number. In the event of a complete system reset, the passwords convert to the default, which is no password.

2. If necessary, enter the appropriate password.

If the password is accepted, the switcher responds with Login User or Login Administrator.

If the password is not accepted, the Password prompt returns.

23DTP CrossPoint 4K Series • Remote Control

Number of Connections

A switcher can have up to 200 simultaneous TCP connections, including all HTTP sockets and Telnet connections. When the connection limit is reached, the switcher accepts no new connections until some have been closed. No error message or indication is given that the connection limit has been reached. To maximize the performance of your switcher, keep the number of connections low and close unnecessary open sockets.

Establishing a USB Port Connection

A standard USB cable and the Extron Product Configuration Software, DSP Configurator, and DataViewer utilities, version 2.0 or newer, can be used for connection to the DTP CrossPoint matrix switcher Configuration port. The USB cable, available at any local electronics store, should be terminated on one end with a mini USB B male connector.

NOTE: Before you use the USB port for the first time, install the USB driver on your computer. The simplest way to do this is to install the Product Configuration Software (see Installing and Starting the Control Programs on page 28) and then run the Found New Hardware Wizard.

Host-to-Switcher Instructions

The switcher accepts SIS commands through its serial port, its USB port, or its LAN port. SIS commands consist of one or more characters per command field. They do not require any special characters to begin or end the command character sequence. Each switcher response to an SIS command ends with a carriage return and a line feed (CR/LF = ]), which signals the end of the response character string. A string is one or more characters.

NOTE: The tables that begin on page 24 are a partial list of SIS commands. For a complete listing, see the DTP CrossPoint 4K Series User Guide at www.extron.com.

Common SIS Command Symbols

The following symbols are used throughout the command and response table, which starts on page 24:

• = Space ] = Carriage return and line feed } = Carriage return (no line feed) | = Pipe (can be used interchangeably with the } character) E = Escape key (hex 1B) W = Can be used interchangeably with the E character


SIS

Com

man

d a

nd

Resp

on

se T

ab

le f

or

Matr

ix S

wit

cher

Com

mands

Com

mand

SIS

Com

mand

(Host

to U

nit

)R

esp

on

se

(Un

it t

o H

ost

)A

dd

itio

nal D

esc

rip

tion

Cre

ate

tie

s

NO

TE

S:

• C

omm

and

s ca

n b

e en

tere

d b

ack-

to-b

ack

in a

str

ing,

with

no

spac

es. F

or e

xam

ple

: 1*1!02*02$03*03%4*4$.

•

The

mat

rix s

witc

hers

sup

por

t 1-

and

2-d

igit

num

eric

ent

ries

(1*1!

or 02*02%)

.

•

Aud

io b

reak

away

com

man

d fu

nctio

ns a

re d

epen

den

t on

the

aud

io r

outin

g se

lect

ions

of t

he in

put

s an

d o

utp

uts.

Tie

inp

ut X!

vid

eo a

nd a

udio

to

outp

ut X@

X!*X@!

OutX@

•InX!

•All]

Tie

the

vid

eo a

nd a

udio

from

inp

ut X!

to o

utp

ut X@ .

Exa

mp

le:

1*3!

Out3

•In1

•All]

Tie

inp

ut 1

to

outp

ut 3

.

Tie

inp

ut X!

to o

utp

ut X@ ,

vid

eoX!*X@%

OutX@

•InX!

•Vid]

Tie

inp

ut X!

vid

eo t

o ou

tput

X@ .

Aud

io is

bro

ken

away

.E

xam

ple

:7*5%

Out5

•In7

•Vid]

Tie

inp

ut 7

vid

eo t

o ou

tput

5.

Tie

inp

ut X!

to o

utp

ut X@ ,

aud

ioX!*X@$

OutX@

•InX!

•Aud]

Tie

inp

ut X!

aud

io t

o ou

tput

X@ .

Aud

io is

bro

ken

away

.E

xam

ple

:2*4$

Out4

•In2

•Aud]

Tie

inp

ut 2

aud

io t

o ou

tput

4.

Tie

inp

ut X!

to a

ll ou

tput

sX!*!

InX!

•All]

X!*%

and

X! *$

are

als

o va

lid.

Qui

ck m

ultip

le t

ieE

+QX!*X@!

...X!*X@$}

Ent

er m

ultip

le t

ie c

omm

and

s (!

, %, a

nd $)

bef

ore

the }

.

Qik]

Rea

d v

ideo

out

put

tie

X@%

X!]

Vid

eo in

put

X!

is t

ied

to

outp

ut X@ .

X@ $

is a

lso

valid

for

aud

io.

Vid

eo m

ute

sV

ideo

onl

y m

ute

X@*1B

VmtX@*1]

Mut

e ou

tput

X@

vid

eo (s

ync

rem

ains

act

ive)

.V

ideo

and

syn

c m

ute

X@*2B

VmtX@*2]

Mut

e ou

tput

X@

vid

eo a

nd s

ync.

Vid

eo u

nmut

eX@*0B

VmtX@*0]

Unm

ute

outp

ut X@

(vid

eo a

nd s

ync

on).

Rea

d v

ideo

mut

eX@B

X#]

Glo

bal

vid

eo m

ute

1*B

Vmt1]

Mut

e al

l vid

eo o

utp

uts.

Glo

bal

vid

eo u

nmut

e0*B

Vmt0]

Unm

ute

all v

ideo

out

put

s.

KE

Y:

X! =

Inp

ut n

umb

er

00

– h

ighe

st n

umb

er o

f inp

uts

for

your

sw

itche

r (00

= u

ntie

d)

X@ =

Out

put

num

ber

01

– h

ighe

st n

umb

er o

f out

put

s fo

r yo

ur s

witc

her

X# =

Mut

e 0

= o

ff (u

nmut

ed)

1 =

vid

eo m

uted

2

= v

ideo

and

syn

c m

uted


Com

mand

SIS

Com

mand

(Host

to U

nit

)R

esp

on

se

(Un

it t

o H

ost

)A

dd

itio

nal D

esc

rip

tion

HD

CP

sta

tus

Vie

w in

put

HD

CP

sta

tus

EIX!HDCP}

X$]

Vie

w H

DC

P s

tatu

s of

all

inp

uts

EIHDCP}

X$1X$

2X$

3 ..

. X$n]

Vie

w o

utp

ut H

DC

P s

tatu

sE

OX@HDCP}

X%]

Vie

w H

DC

P s

tatu

s of

all

outp

uts

EOHDCP}

X%1X%

2X%

3 ..

. X%n]

Incl

udes

mirr

ored

out

puts

(suc

h as

5A

, 5B

, 6A

, 6B

for 1

0x8)

for a

to

tal o

f tw

o m

ore X%

s th

an th

e nu

mbe

r of o

utpu

ts (1

0 fo

r 10x

8).

Inp

ut

rep

ort

s as

an

HD

CP

-auth

ori

zed d

evi

ce

HD

CP

-aut

horiz

ed d

evic

e on

EEX!*1HDCP}

HdcpEX!*1]

Set

the

inp

ut a

s an

HD

CP

-aut

horiz

ed d

evic

e.

HD

CP

-aut

horiz

ed d

evic

e of

fE

EX!*0HDCP}

HdcpEX!*0]

Set

the

inp

ut a

s no

t an

HD

CP

-aut

horiz

ed d

evic

e.

Vie

w H

DC

P-a

utho

rized

sta

tus

EEX!HDCP}

X^]

Sho

w H

DC

P-a

utho

rized

dev

ice

stat

us.

Exe

cu

te A

uto

-Im

age

Exe

cute

Aut

o-Im

age

X&*A

ImgX&

]

Lis

t D

igit

al S

ync V

alid

ati

on P

rocess

ing (D

SV

P)

List

syn

c of

all

inp

uts

0LS

X*1X*

2X*

3 ..

. X*n]

Mul

itple

X* s

; eac

h is

the

sig

nal s

tatu

s of

an

inp

ut, s

tart

ing

from

1. n

is t

he h

ighe

st n

umb

er o

f inp

uts

for

your

sw

itche

r.E

xam

ple

(D

TP

Cro

ssP

oin

t 10

8):

0LS

Inp

ut:

Res

pon

se S

tatu

s: 0

= N

o in

put d

etec

ted

1 =

Syn

c de

tect

ed

12

34

56

78

910

0 0

0 1

1 1

0 1

0 1

KE

Y:

X! =

Inp

ut n

umb

er

01

– h

ighe

st n

umb

er o

f inp

uts

for

your

sw

itche

r X@

= O

utp

ut n

umb

er

01

– h

ighe

st n

umb

er o

f out

put

s fo

r yo

ur s

witc

her

X$ =

HD

CP

sta

tus

(for

inp

uts)

0

= n

o so

urce

con

nect

ed

1 =

sou

rce

is H

DC

P c

omp

liant

2

= s

ourc

e is

not

HD

CP

com

plia

nt

X% =

HD

CP

sta

tus

(for

outp

uts)

0

= N

o m

onito

r co

nnec

ted

1 =

Mon

itor

conn

ecte

d b

ut d

oes

not

sup

por

t H

DC

P

2

= M

onito

r co

nnec

ted

, sup

por

ts H

DC

P, b

ut t

he v

ideo

sig

nal i

s no

t en

cryp

ted

7 =

Mon

itor

conn

ecte

d, s

upp

orts

HD

CP,

and

the

vid

eo s

igna

l is

encr

ypte

d

X^ =

HD

CP

-aut

horiz

ed d

evic

e 0

= o

ff 1

= o

n (d

efa

ult

) X&

= S

cale

d o

utp

ut n

umb

er

05

thr

ough

08

(10x

8)

3 t

hrou

gh 6

(8x6

) 3

and

4 (8

x4)

1 a

nd 2

(8x2

) X*

= S

igna

l det

ectio

n st

atus

0

= n

o in

put

con

nect

ed

1 =

inp

ut c

onne

cted


Com

mand

SIS

Com

mand

(Host

to U

nit

)R

esp

on

se

(Un

it t

o H

ost

)A

dd

itio

nal D

esc

rip

tion

Inp

ut

au

dio

sele

cti

on

Inp

ut a

udio

sel

ectio

nE

IX!*X(AFMT}

AfmtIX!*X(

]

Exa

mp

le:

EI1*0AFMT}

AfmtI01*0]

Aut

o (0

): D

igita

l aud

io t

akes

prio

rity

over

ana

log

aud

io.

Vie

w in

put

aud

io s

elec

tion

EIX!AFMT}

X(]

Vie

w in

put

aud

io a

ll se

lect

ions

EIAFMT}

X(1X(

2X(

3 ..

. X(n]

Eac

h X(

is t

he a

uto,

ana

log,

or

HD

MI s

elec

tion

of a

n au

dio

in

put

, sta

rtin

g at

inp

ut 1

. n is

the

hig

hest

num

ber

of i

nput

s fo

r yo

ur s

witc

her.

Gro

up

mast

er

leve

l (v

olu

me a

nd m

ute

)

NO

TE

S:

• Th

e D

TP C

ross

Poi

nt s

witc

hers

hav

e 16

con

figur

able

gro

up m

aste

rs.

•

By

fact

ory

def

ault,

gro

up 1

con

trol

s th

e p

rogr

am v

olum

e an

d g

roup

2 c

ontr

ols

the

mic

vol

ume.

No

mut

e gr

oup

s ar

e cr

eate

d b

y fa

ctor

y d

efau

lt.

•

Oth

er g

roup

mas

ters

(suc

h as

mut

es) m

ust

be

pre

sent

(hav

e al

read

y b

een

crea

ted

) in

the

DS

P C

onfig

urat

or p

rogr

am t

o b

e av

aila

ble

as X1) s

for

SIS

com

man

ds.

Set

gai

n (+

) or

atte

nuat

ion

(−) d

B

valu

eE

DX1) *

±X1! GRPM}

GrpmDX1) *

X1!]

Sp

ecify

+ fo

r ga

in o

r -

for

atte

nuat

ion.

Exa

mp

le:

ED1*+50GRPM}

GrpmD1*50]

Sp

ecify

5 d

B le

vel f

or g

roup

1 (p

rogr

am v

olum

e).

Incr

emen

t d

B v

alue

EDX1) *

X1! +GRPM}

GrpmDX1) *

X1!]

Incr

ease

mas

ter X1)

by X1! .

Exa

mp

le:

ED1*65+GRPM}

GrpmD1*115]

Incr

ease

gro

up 1

(pro

gram

vol

ume)

by 6

.5 d

B (t

o 11

.5 d

B).

Dec

rem

ent

dB

val

ueE

DX1) *

X1! −GRPM}

GrpmDX1) *

X1!]

Dec

reas

e m

aste

r X1)

by X1! .

Vie

w m

aste

r va

lue

EDX1) GRPM}

X1!]

Set

mut

e or

unm

ute

EDX1) *

X#GRPM}

GrpmDX1) *

X#]

Mut

e (1

) or

unm

ute

(0) t

he g

roup

.

KE

Y:

X! =

Inp

ut n

umb

er

01

– h

ighe

st n

umb

er o

f inp

uts

for

your

sw

itche

r X#

= M

ute

0 =

off

(unm

uted

) 1

= o

n (m

uted

) X(

= In

put

aud

io s

ourc

e 0

= A

uto

(see

the

exa

mp

le a

bov

e)

2 =

Ana

log

(loca

l 2-c

hann

el a

udio

)

1 =

HD

MI (

de-

emb

edd

ed d

igita

l aud

io) (

def

ault

) X1)

= G

roup

num

ber

01

– 16

(can

be

a us

er-d

efine

d a

lias

encl

osed

in b

rack

ets

{})

X1!

= G

roup

mas

ter

valu

e d

B v

alue

in 0

.1 in

crem

ents

. Exa

mp

le: X

1! =

50

= 5

dB

.


Com

mand

SIS

Com

mand

(Host

to U

nit

)R

esp

on

se

(Un

it t

o H

ost

)A

dd

itio

nal D

esc

rip

tion

Recall

a p

rese

tR

ecal

l a p

rese

tX1# .

RprX1#]

Rec

all p

rese

t X1# .

Com

man

d c

hara

cter

is p

erio

d.

Vie

w v

ideo a

nd

au

dio

mute

sV

iew

out

put

mut

esE

VM}

X1$1X1$2

... X1$

n ]E

ach X1$

resp

onse

is t

he m

ute

stat

us o

f an

outp

ut, s

tart

ing

from

out

put

1. I

nclu

des

mirr

ored

out

put

s (s

uch

as 3

A, 3

B, 4

A,

4B fo

r 8x

6) fo

r a

tota

l of t

wo

mor

e X1$ s

tha

n th

e nu

mb

er o

f ou

tput

s (8

for

8x6)

.E

xam

ple

: (D

TP

Cro

ssP

oin

t 10

8):

EVM}

02200001]

Out

put

1, 4

, 5, 6

, and

7 a

re u

nmut

ed. A

udio

is m

uted

on

outp

uts

2 an

d 3

, vid

eo is

mut

ed o

n ou

tput

8.

Lock (E

xecu

tive

) m

odes

NO

TE

: S

ee S

etti

ng t

he F

ront

Pan

el L

ock

s (E

xecu

tive

Mo

des

) on

pag

e 20

for

mor

e in

form

atio

n on

the

Loc

k m

odes

.

Lock

all

fron

t p

anel

func

tions

1X

Exe1]

Set

Loc

k m

ode

1.

Lock

ad

vanc

ed fr

ont

pan

el fu

nctio

ns2X

Exe2]

Set

Loc

k m

ode

2.

Unl

ock

all f

ront

pan

el fu

nctio

ns0X

Exe0]

Set

Loc

k m

ode

0.

Vie

w lo

ck s

tatu

sX

X1%]

Info

rmati

on

req

uest

sIn

form

atio

n re

que

stI

DTPCP108]

One

of s

ever

al r

esp

onse

s sh

own

as a

n ex

amp

le.

Req

uest

par

t nu

mb

erN

60-

nnnn-

nn]

See

the

Ext

ron

web

site

for

par

t nu

mb

er.

Que

ry fi

rmw

are

vers

ion

QX1^]

Exa

mp

le:

Q1

.23]

The

fact

ory-

inst

alle

d s

witc

her

cont

rolle

r fir

mw

are

vers

ion

is

1.23

(sam

ple

val

ue o

nly)

.

KE

Y:

X1#

= P

rese

t 01

thr

ough

32

X1$

= V

ideo

and

aud

io m

ute

stat

us

0 =

vid

eo u

nmut

ed

1 =

vid

eo m

ute

2 =

vid

eo a

nd s

ync

mut

e X1%

= L

ock

mod

e 0

= lo

ck m

ode

0 (u

nloc

ked

) 1

= lo

ck m

ode

1 2

= lo

ck m

ode

2 (d

efau

lt)

X1^

= F

irmw

are

vers

ion

num

ber

to

seco

nd d

ecim

al p

lace

(x.xx)


Installing and Starting the Control Programs

The following programs are available on the Extron website:

Digital Signal Processor (DSP) Configurator program — Required for full operation of switcher DSP functions. It also provides some limited control of the switcher non-DSP functions. See the DTP CrossPoint 4K Series User Guide and the program Help file for more information.

Product Configuration Software (PCS) — Configures the video functions of the switcher, including creating video and audio ties saving logos. Also provides control of audio line input gain and attenuation, output attenuation and muting, audio input format (analog, digital, or auto), and output audio source (DSP or original [embedded]).

Run either program from a Windows-based computer connected to an AV LAN port (IPCP models) or the LAN port (non-IPCP models) (R or Q on page 10) or USB port (A on page 16).

NOTES:

• For details on operating the program, see the DTP CrossPoint 4K Series User Guide.

• The DSP Configurator program has a software switch that allows you to lock out audio adjustments in the Product Configuration Software, making them unavailable for selection.


Installing the programs

The DSP Configurator, version 2.11 or newer, and PCS, version 3.4 or newer are available on the Extron website. Download and install both programs as follows:

NOTE: This procedure was written using Microsoft® Internet Explorer®. Depending on the browser you use, some steps or indications may be different.

1. Go to www.extron.com and hover the cursor over the Download tab (see figure , 1). The Find Software & Downloads link appears (2).

1111111111

3333333333

2222222222

Figure 18. Find Software and Downloads

2. Click the Software (3) link. The main download page opens (see figure 19).

3. Click the desired filtering letter to jump to the page of downloads nearest the program.

4. Click Download for the desired program (see figure 19, 1) (Product Configuration Software shown).

1111111111

Figure 19. Download the Software

5. Follow the on-screen instructions. The installation program creates the necessary directories and folders and installs the programs.



Starting the Product Configuration Software

1. Click Start > Programs > Extron Electronics > Extron Product Configuration Software > Extron Product Configuration Software.

The Product Configuration Software opens to the Device Discovery screen (see figure 20).

11111111111111

22222222222222

Figure 20. Device Discovery Screen

TIP: You can also launch the DSP Configurator program from the Product Configuration Software, BUT PCS audio level controls can be locked out from within DSP.

2. Select (click) your DTP CrossPoint (1) and click Connect (2).


The PCS opens a DTP CrossPoint window (see figure 21). Operate the program as described in the built-in Help file and DTP CrossPoint 4K Series User Guide, at www.extron.com.

Figure 21. Product Configuration Software

18

19



Starting the DSP Configurator Program

The DSP Configurator can connect to the switcher via any rear panel LAN port or the front panel Configuration port.

NOTE: Extron recommends connection via an Ethernet LAN port for the DSP Configurator program.

Start the DSP Configurator program, as follows:

1. Click Start > Programs > Extron Electronics > DSP Configurator > DSP Configurator. The DSP Configurator Startup screen opens (see figure 22).

Figure 22. DSP Configurator Screen and Device Selection

TIP: You can also launch the DSP Configurator program from within the Product Configuration Software.

2. Select the DTP CrossPoint switcher in the drop-down menu and click OK.

TIP: If you have only DTP CrossPoint switchers of the same model, click Always perform the selected action to eliminate step 2 in future startups.

The DSP Configurator program starts in Emulate mode (see figure 23 on page 32).

NOTE: In Emulate mode, changes and settings are stored in the PC and not sent to the switcher until you select Live mode and "push" the settings to the switcher. See the DTP CrossPoint 4K Series User Guide.

20


* The output 1 amplifier block is not present on non-IPCP models.

Figure 23. DSP Configurator, DTP CrossPoint 108 Selected

NOTE: The DSP Configurator has a software lock that protects the complex DSP audio adjustments, making them unavailable for selection in PCS. This protects the DSP settings against inadvertent changes made by the more basic PCS audio adjustment capabilities.

This software lock can be overridden, but Extron STRONGLY advises against doing so.

21


Accessing the HTML Pages

NOTES:

• If your Ethernet connection to the matrix switcher is unstable, try turning off the proxy server in your Web browser. In Microsoft Internet Explorer, click Tools > Internet Options > Connections > LAN Settings, uncheck the Use a proxy server... box, and then click OK.

• For details on operating the switcher via HTML pages, see the "HTML Operation" section in the DTP CrossPoint 4K Series User Guide.

1. Start the Web browser program.

NOTE: For best results, Extron recommends the following browsers and compatibility mode:

• Microsoft Internet Explorer, version 8.0 or newer, with compatibility mode off

• Mozilla® Firefox®, version 6 or newer

• Google Chrome™, version 9 or newer

• Apple® Safari®, version 4 or newer

2. Click in the Address field and enter the IP address.

3. Press the keyboard <Enter> key. The switcher checks whether it is password-protected.


If the switcher is not password-protected, the switcher displays the HTML start-up page. The switcher is ready for operation via HTML remote control.

If the switcher is password-protected, the switcher displays the Authentication Required dialog box (see figure 24).

Figure 24. Authentication Required Dialog Box

22


5. Enter the appropriate user name and administrator or user password in the Password field and click OK.


The switcher displays the HTML start-up page (see figure 25). The switcher is ready for operation via HTML remote control.

Figure 25. HTML Startup Page, Shown Connected to DTP CrossPoint 108, in Google Chrome

23

Extron Warranty

Extron Electronics warrants this product against defects in materials and workmanship for a period of three years from the date of purchase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electronics will, at its option, repair or replace said products or components, to whatever extent it shall deem necessary to restore said product to proper operating condition, provided that it is returned within the warranty period, with proof of purchase and description of malfunction to:

USA, Canada, South America, and Central America: Extron Electronics 1230 South Lewis Street

Anaheim, CA 92805 U.S.A.

Japan: Extron Electronics, Japan Kyodo Building, 16 Ichibancho Chiyoda-ku, Tokyo 102-0082 Japan

Europe and Africa: Extron Europe Hanzeboulevard 10 3825 PH Amersfoort The Netherlands

China: Extron China 686 Ronghua Road Songjiang District Shanghai 201611 China

Asia: Extron Asia 135 Joo Seng Road, #04-01 PM Industrial Bldg. Singapore 368363 Singapore

Middle East: Extron Middle East Dubai Airport Free Zone F13, PO Box 293666 United Arab Emirates, Dubai

This Limited Warranty does not apply if the fault has been caused by misuse, improper handling care, electrical or mechanical abuse, abnormal operating conditions, or if modifications were made to the product that were not authorized by Extron.

NOTE: If a product is defective, please call Extron and ask for an application engineer to receive an RA (return authorization) number. This will begin the repair process.

USA: 714.491.1500 or 800.633-9876 Europe: 31.33.453.4040 Asia: 65.6383.4400 Japan: 81.3.3511.7655

Units must be returned insured, with shipping charges prepaid. If not insured, you assume the risk of loss or damage during shipment. Returned units must include the serial number and a description of the problem, as well as the name of the person to contact in case there are any questions.

Extron Electronics makes no further warranties either expressed or implied with respect to the product and its quality, performance, merchantability, or fitness for any particular use. In no event will Extron Electronics be liable for direct, indirect, or consequential damages resulting from any defect in this product even if Extron Electronics has been advised of such damage.

Please note that laws vary from state to state and country to country, and that some provisions of this warranty may not apply to you.

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

Documents

DTP CrossPoint 4K Series - Extron€¦ · Pour en savoir plus sur les règles de sécurité, la conformité à la réglementation, la compatibilité EMI/EMF, l’accessibilité, et