RUGGED AND DURABLE

Protection against dust and water is stan-dard and ensures reliable operation in all environments. The optional rubber-boot gives additional protection for the Dräger X-am 3000 from bumps and hits.

EASY TO USE

A large display enables the easy identifi-cation of the measured values. The simple 3-button operation and an easy to use menu ensure intuitive operation. The visible menu makes selecting and performing other functions quick and simple. After switching on the Dräger X-am 3000, it performs a self-test.

INTELLIGENT SENSORS

The precalibrated electrochemical sensors, and the catalytic sensor are automatically recognized and provide precise and reliablemeasuring results. All DrägerSensors show a fast and accurate response to changing gas concentrations.

INTEGRATED HIGH-PERFORMANCE PUMP

An optional internal pump which can be used together with 20 m / 66 ft. tubing is ideal for confined space applications. A convenient pump adaptor makes is easy to switch between pump and diffusion mode.

DISTINCTIVE ALARMS

In addition to a very loud audible alarm and a visual alarm, a vibrating alarm is inte-grated in the instrument. The functionality and the battery status are monitored con- tinuously and will, if necessary, generate an alarm. TWA and STEL are also evaluated. Different alarm cadences indicate pre and main alarm conditions.

USEFUL SOFTWARE FUNCTIONS

A life signal assures full functionality of theinstrument without a visual check by the operator. Even if the peak value disappeared before it could get registered, the Dräger X-am 3000 can recall all maximum values. When using a defined gas mixture, the instrument can be calibrated by pressing a single button.

Designed for industrial use under harsh conditions: The robust 2 to 4 gas detector Dräger X-am 3000 continually monitors H2S, CO, O2 and combustible gases in the ambient air. The functional design and microprocessor-controlled digital technology of the device are precisely adjusted to the needs and requirements of personal gas warning.

Dräger X-am® 3000

ST-

2881

-200

3

Dräger X-am® 3000With optionally integrated pump for industrial use under harsh conditions.

ST-

4981

-200

5

ST-

2432

-200

3

DrägerSensorsFast, accurate and reliable

Large displayAll values and status informationat a glance

Alarm functionsAudible, visual and vibrating alarm

Robust enclosureCompact, rugged and waterproof

02 | DRÄGER X-AM® 3000

MEET INDIVIDUAL POWER

REQUIREMENTS

NiMH and alkaline batteries are available and can be interchanged. There are diffe-rent charging options, including a car charger, to meet your specific requirements.

DATALOGGER OPTION

Dräger X-am 3000 can be fitted with a data-logger which records gas concentrations and alarms up to 30,000 sets of values.

CALIBRATION EQUIPMENT

Easy to use, fast and professional in perfor-mance: from a bump test to the complete documentation, Dräger offers practice- oriented solutions which ensure safety for each application. The automatic test and calibration system Dräger E-Cal and Dräger Bump-Test-Station complement one another to minimize time and effort.

Dräger X-am® 3000Optional internal pump –ideal for confined space applications.

ST-

2923

-200

3

Dräger X-am® 3000All menu functions on one level.

ST-

2706

-200

3

Dräger E-Cal The workshop solution for fully automatic function tests and calibratios.

ST-

1012

-200

4

DRÄGER X-AM® 3000 | 03

ORDER INFORMATION

Description Order No.

Dräger X-am 3000 83 17 730Consisting of: basic instrument with Ex and O2 sensors, an integrated pump, pump- and calibration cradle.A functional instrument must include a power supply unit and as an optional addendum a third and fourth sensor or the data logger can be ordered.

Dräger X-am 3000 83 17 740Consisting of: basic instrument with Ex and O2 sensors and calibration cradle.A functional instrument must include a power supply unit and as an optional addendum a third and fourth sensor or the data logger can be ordered.

Data logger, installed optiob 83 17 717

DrägerSensors Measuring Range Resolution Response time(t50) Order Code

DrägerSensor CatEx 2 0 – 100% UEG 1% UEG 8 sec. is included

0 – 5 Vol.-% CH4 0,1 Vol.-%

DrägerSensor O2 0 – 25 Vol.-% 0,1 Vol.-% 10 sec. is included

DrägerSensor H2S 0 - 100 ppm 1 ppm 15 sec. 68 10 032

DrägerSensor CO 0 - 1000 ppm 1 ppm 20 sec. 68 10 030

Power supply units

NiMH power pack 83 17 709

Alkaline power pack (without alkaline batteries) 83 17 716

Charging accessories

Charging module with power supply EUR 83 17 763

Charging module with power supply UK 83 17 761

Charging module with power supply AUS 83 17 752

Charging module with power supply JAPAN 83 17 850

Car charging connection cabel 12V/24V 83 17 754

Pump accessories

Pump cradle 83 17 328

Calibration accessories

Calibration cradle 83 17 336

Dräger E-Cal module 83 17 719

Power supply for Dräger E-Cal module 83 16 990

Dräger Bump-Test-Station (without gas cylinder) 83 17 425

Dräger Bump-Test-Station complete with one test gas cylinder 58L

(gas and concentration variable) 83 19 071

Communication accessories

Dräger GasVision 83 14 034

Dräger CC-Vision 64 08 515

RS 232 cable 9-25 64 08 257

Other accessories

Nylon carrying case 83 17 720

Leather carrying case 83 17 726

Case (without content) 33 10 847

Rubber boot, black 83 17 727

TECHNICAL DATA

Size (h x w x d, approx.) 90 x 140 x 55 mm,

3.5‘‘ x 5.5‘‘ x 2.2‘‘

Weight (approx.) 550 g, 20 oz.

Ambient conditions Temperature - 20 to + 55 °C; - 5 to + 130 °F

short term - 40 to + 55 °C; - 40 to + 130 °F

Pressure 700 to 1300 hPa, 20.7 to 38.4 inch Hg

Humidity 10 to 95 %RH

Ingress protection IP 65

Alarms visual 360 °

audible > 90 dB bei 30 cm

vibration

Operating time Alkaline > 24 hours (diffusion mode)

> 12 hours (pump mode)

NiMH > 18 hours (diffusion mode)

> 12 hours (pump mode)

Charging time < 4 hours

Pump mode maximum length of tubing 20 m

Approvals UL Class I, Div 1, Group A, B, C, D; Temp Code T4

CSA Class I, Div 1, Group A, B, C, D; Temp Code T4

CE-mark electromagnetic compatibility (directive 2004/108/EC)

IECEx Ex ia d I/IIC T4; - 25 ≤ = Ta ≤ = + 55 °C (rechargeable)

- 25 ≤ = Ta ≤ = + 50 °C (alkaline)

90 4

4 77

0 |

10.

12-1

| M

arke

ting

Com

mun

icat

ions

| P

P |

PR

| L

E |

Pri

nted

in

Ger

man

y |

Chl

orin

e-fr

ee –

env

iron

men

tally

com

patib

le |

Sub

ject

to

mod

ifica

tions

| ©

201

2 D

räge

rwer

k A

G &

Co.

KG

aA

HEADQUARTERSDräger Safety AG & Co. KGaARevalstrasse 123560 Lübeck, Germany

www.draeger.com

SPAINDräger Safety Hispania S.A.Calle Xaudaró 528034 MadridTel +34 91 728 34 00Fax +34 91 729 48 99

UNITED KINGDOMDraeger Safety UK Ltd.Blyth Riverside Business ParkBlyth, Northumberland NE24 4RGTel +44 1670 352-891Fax +44 1670 356-266

USADraeger Safety, Inc.101 Technology DrivePittsburgh, PA 15275Tel +1 412 787 8383Fax +1 412 787 2207

FRANCEDräger Safety France SAS3c route de la Fédération, BP 8014167025 Strasbourg Cedex 1Tel +33 3 88 40 59 29Fax +33 3 88 40 76 67

ITALYDraeger Safety Italia S.p.AVia Longarone 3520080 Zibido San Giacomo (MI), ItalyTel +39 02 90 59 49 1Fax +39 02 90 00 36 86

MEXICODraeger Safety S.A. de C.V.Av. Peñuelas No. 5 Bodega No. 37Fraccionamiento Industrial San PedritoQuerétaro, Qro MéxicoTel +52 442 246-1113Fax +52 442 246-1114

NETHERLANDSDräger Safety Nederland B.V.Edisonstraat 532700 AH ZoetermeerTel +31 79 344 46 66Fax +31 79 344 47 90

REP. OF SOUTH AFRICADräger South Africa (Pty) Ltd.P.O.Box 68601Bryanston 2021Tel +27 11 465 99 59Fax +27 11 465 69 53

SINGAPOREDraeger Safety Asia Pte Ltd67 Ayer Rajah Crescent #06-03Singapore 139950Tel +65 68 72 92 88Fax +65 65 12 19 08

SUBSIDIARIES

AUSTRALIADraeger Safety Pacific Pty. Ltd.Axxess Corporate ParkUnit 99, 45 Gilby RoadMt. Waverley Vic 3149Tel +61 3 92 65 50 00Fax +61 3 92 65 50 95

CANADADraeger Safety Canada Ltd.7555 Danbro CrescentMississauga, Ontario L5N 6P9Tel +1 905 821 8988Fax +1 905 821 2565

P. R. CHINABeijing Fortune Draeger Safety Equipment Co., Ltd.A22 Yu An Rd, B Area, Tianzhu Airport Industrial Zone, Shunyi District, Beijing 101300Tel +86 10 80 49 80 00Fax +86 10 80 49 80 05