Upload
others
View
7
Download
0
Embed Size (px)
Citation preview
Draft report
Draft report
Listing Constructional Data Report (CDR)
Report Number 160909081GZU-001 DRAFT Issued: 14-Sep-2017 For Review and Comment
Standard(s)
Applicant Manufacturer
Address Address
Country CountryContact ContactPhone PhoneFAX FAXEmail Email
1.0 Reference and Address
No.56 Donggang Avenue, DongshengDistrict, ZHONGSHAN CITYGuangdong Province 528414 CHINA
13430360245 13430360245
No.56 Donggang Avenue, DongshengDistrict, ZHONGSHAN CITYGuangdong Province 528414 CHINA
China
Zhongshan Lovas Electric ApplianceCo., LTD.
China
Zhongshan Lovas ElectricAppliance Co.,LTD.
[email protected] [email protected]
Motor-Operated Household Food Preparing Machines <Expires: 30Nov2021> [UL 982:2015Ed.7+R:24Jun2015]
Portable Electrical Motor-Operated And Heating Appliances: Particular Requirements ForElectrical Motor-Operated Kitchen Appliances (R2013) [CSA C22.2#1335.2.14:1993 Ed.1+G1]82Portable Electrical Motor-Operated And Heating Appliances: General Requirements (R2013)[CSA C22.2#1335.1:1993 Ed.1+G1]
Mr. Wu Yao Mr. Wu Yao
Page 1 of 39
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 2 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
ProductBrand name
ModelsModel SimilarityRatingsOther Ratings NA
120V, 60Hz, 240W.
2.0 Product Description
Slow JuicerZhongshan Lovas Electric Appliance Co., LTD.
DescriptionThe product covered by this report is Slow Juicer having a rating of 120 V, 60 Hz, for householdand indoors use only, provided with a non-detachable power supply cord terminated in a 3-wiregrounding attachment plug.
H8001, H8002Model H8002 is similar to H8001, except outer view and model designation.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 3 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Photo 1 - External View for model H8001
Photo 2 - External View for model H8002
3.0 Product Photographs
1
2
3
4
5
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 4 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
3.0 Product Photographs
Photo 3 - External View
Photo 4 - External View
6
7
8
9
10
11
12
13
1415
32
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 5 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
3.0 Product Photographs
Photo 5 - internal View
Photo 6 - Internal View
19
20
16
17
18
22
2324
26
25
21
27
31
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 6 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
3.0 Product Photographs
Photo 7 - Internal View
Photo 8 - Motor Assembly
30
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 7 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
3.0 Product Photographs
Photo 9 - Motor Assembly
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 8 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Photo #
Item
no.1Name
Manufacturer/
trademark2 Type / model2Technical data and securementmeans
Mark(s) ofconformity
3
1 1 Power Cord Set Various SVT
Rated 300 V, 105 , VW-1, 18AWG x 3C. 0.61~2.1m from cordentry to plug face, flexible cordintegrally molded on a recognized3-wire grounding type 5-15P plug.
cULus
1 2 Main Switch
TongdeElectronicsElectricAppliances Co.,Ltd
KDC-A05Rated 125Vac, 13RA, 105ºC,endurance: 6000 cycles. Securedto Handle Cover by hooks.
cURus
1 3 Upper Enclosure
A SCHULMANPLASTICS(DONGGUAN)LTD
ABS / LP 320
Rated HB, HWI=3, HAI=1, CTI=0,80°C, measured 2.5 mmthickness minimum. Secured toBottom Enclosure by screws.
cURus
1 4 Handle Cover
A SCHULMANPLASTICS(DONGGUAN)LTD
ABS / M /MK
Rated HB, HWI=4, HAI=0, 60°C,measured 2.5 mm thicknessminimum. Secured to UpperEnclosure by screws and plugs.
cURus
1 5 Main Enclosure
A SCHULMANPLASTICS(DONGGUAN)LTD
ABS / M /MKRated HB, HWI=4, HAI=0, 60°C,measured 3.0 mm thicknessminimum.
cURus
3 6 Bottom Base
A SCHULMANPLASTICS(DONGGUAN)LTD
ABS / LP 320
Rated HB, HWI=3, HAI=1, CTI=0,80°C, measured 3.0 mmthickness minimum. Provided agroup of vents, measured max.wide 2.7 mm. Secured to MainEnclosure by screws.
cURus
3 7 Foot Various VulcanizateRated 60°C, measured 2.2 mmhigh to support surface. Securedto Bottom Base snap.
cURus
3 8 Label Various VariousRated 60°C minimum. Suit to ABSmaterial. Refer to Illustration 1 fordetails.
cURus
4 9 Bowl Cover
A SCHULMANPLASTICS(DONGGUAN)LTD
PC / XP 31 RRated HB, 80°C, thickness 3.0mm minimum. Secured to Bowl byslots.
cURus
4 10 Stopper Various ABS
Rated 60°C, thickness 3.0 mmminimum. With feed openingmeasured Φ44mm. Secured toBowl Cover by screws.
cURus
4 11 Bowl
A SCHULMANPLASTICS(DONGGUAN)LTD
PC / XP 31 RRated HB, 80°C, thickness 3.0mm minimum. Secured to UpperEnclosure by slots.
cURus
4 12 Strainer Various Various Stainless Steel, SUS304. NR4 13 Pusher Various ABS Rated HB, 60°C minimum. cURus
4 14 Brush Bracket Various ABSRated HB, 60°C, thickness 2.0mm minimum.
cURus
4.0 Critical Components
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 9 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Photo #
Item
no.1Name
Manufacturer/
trademark2 Type / model2Technical data and securementmeans
Mark(s) ofconformity
3
4.0 Critical Components
4 15 Rolling Compactor Various ABSRated HB, 60°C, thickness 2.0mm minimum.
cURus
5 16Internal WireConnector
LANXESS AGPA6 / DP1852/30+
Rated V-0, HAI=3, HWI=0, CTI=1,80°C, thickness 1.0 mm minimum.
cURus
5 17 Cord Bushing
SILVER AGEENGINEERINGPLASTICS(DONGGUAN)CO LTD
PVC / 790Rated V-0, 85°C, Secured PowerCord to Bottom Base.
cURus
5 18 Cord Clamp
ZhongshanChangJiaElectronicsCo.,LTD
PA6 / DP1852/30+
Rated V-0, 80°C, Secured PowerCord to Bottom Base.
cURus
5 19Quick ConnectorAssembly (notshown)
Various VariousConsists of the item 19a and item19b.
NR
5 19aQuick Connector(not shown)
Various VariousType187. Brass alloy tabs, non-insulated type. Met UL310.
cURus
5 19bQuick ConnectorSleeving
VariousSilicone rubbertubing
Rated 300V, 150°C minimum.Sleeved on Quick Connector.
cURus
5 20 Start Capacitor
NANTONGCHENSHENCAPACITOR COLTD
CBB60Rated 250VAC, 50/60Hz, 25uF,70°C, Secured to Bottom Base byCapacitor Holder.
cURus
5 21 Capacitor Holder
GUANGDONGWAYLAMENGINEERINGPLASTICS COLTD
PP / PP-FR202T
Rated V-2, HAI=0, HWI=2, CTI=0,110°C, thickness 2.0 mmminimum. Secured to BottomBase by Screws.
cURus
5 22 Motor Pad Various Silicone RubberRated 150°C, thickness 1.0 mmminimum.
cURus
6 23 Sensor Switch
Foshan GaomingChuandongMagneticElectronic Co., Ltd
CMS-14E-2 Rated 120VAC, 2.13A. See 5.0
6 24Sensor SwitchHolder
A SCHULMANPLASTICS(DONGGUAN)LTD
ABS / LP 320
Rated HB, HAI=1, HWI=3, CTI=0,80°C, thickness 1.5 mm minimum.Secured to Upper Enclosure byscrews.
cURus
6 25 Bowl Hook
A SCHULMANPLASTICS(DONGGUAN)LTD
ABS / M /MK
Rated 60°C, HWI=4, HAI=0,thickness 6.5 mm minimum.Secured to Upper Enclosure byscrews.
cURus
6 26 Cover Tape Various VariousRated HB, 60°C, thickness 0.9mm minimum, with glue suit toABS material.
cURus
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 10 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Photo #
Item
no.1Name
Manufacturer/
trademark2 Type / model2Technical data and securementmeans
Mark(s) ofconformity
3
4.0 Critical Components
6 27 Fuse Link HolderSHIN CHININDUSTRIAL COLTD
R3-12Rated 250Vac, 10A, thickness 1.3mm minimum. Consists of twoparts and connecting by thread.
cURus
6 28Fuse Link (Notshown)
XCELECTRONICS(SHENZHEN)CORP LTD
5T Rated 250 Vac, 3.15A. cURus
5 29Internal Wire (Notshown)
Various 1015Rated 600V, 105°C, #22AWG atleast.
cURus
8 30 Motor AssemblyZhongshan LovasElectric ApplianceCo.,Ltd
YY120-150Rated 120V, 60Hz, 240W, 1350rpm at no load.
See 5.0
5 31 Cord Tie Various VariousRated 60°C minimum. Tied upinternal wires.
cURus
4 32 Magnetic Bar Various VariousMagnetized iron. Measureddiameter 6mm, length 5mm.
NR
NOTES:
3) Indicates specific marks to be verified, which assures the agreed level of surveillance for the component. "NR" - indicates Unlisted andonly visual examination is necessary. "See 5.0" indicates Unlisted components or assemblies to be evaluated periodically refer to section5.0 for details.
1) Not all item numbers are indicated (called out) in the photos, as their location is obvious.
2) “Various“ means any type, from any manufacturer that complies with the "Technical data and securement means" and meets the "Mark(s)of conformity" can be used.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 11 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Photo # Item no.
8 30
A
72+48 -- --
72+48 -- --
Frequency: Annual 1
Winding resistance
Dielectric StrengthApply voltage Between Test Voltage Test Time
Primary to core 1240 60
See resistance per winding above.
VERIFICATION PROCESSTest Site: CEC Number of samples to test:
Test Name Test Parameters
0.5Polyester-imide
copper wire
Stator Winding 2
Wire Type Turns Volts
Rated 600V, 200°C, VW-1.Various Various
AmpsDC resistance(Ω) +/- 10%:
Stator Winding 1
Rated 125V, 50/60Hz, 16A, Tf=115.
0.5Polyester-imide
copper wire
WINDING(S) RESISTANCEWindingDesignation
Wire Size
(AWG or mm2)
8.9
8.6
Various Various
5.0 Critical Unlisted CEC Components
Insulated CoilName Manufacturer/Trademark Type / model
Motor AssemblyZhongshan Lovas ElectricAppliance Co.,Ltd
YY120-150
JIANGSUCHANGSHENGELECTRICAPPLIANCE COLTD
17AM-D
6023、6021 Rated 155°C, 0.08mm.
Electrical Rating: 120V, 60Hz, 240W. Insulation classComponent Standard used: Tested with appliance.MATERIALS LIST (refer to illustration 4 for assembly drawing)
QZ-2/155Polyester-imide copper wire, rated 155°C. Seethe Table below for more detail.
Insulating Film
Component Manufacturer Type/model Dimensions/thickness/assembly information
SICHUANDONGFANGINSULATINGMATERIALCO.,LTD
Stator LaminationSHANGHAIBAOGANG
DW800Silicone Steel. Measured 0.6 mm thick for onesheet. Size: 109mm x 109mm.
Stator Winding
Rubber Bushing Various Various
YIXING NOVELELECTRICIANMATERIALS COLTD
Rated HB, 95°C. Measured 2.0mm thick
Fiberglass TubeRotor Aluminum. Diameter 70mm x Length 70mm.
Motor HousingCast iron. Measured 3.0 mm thick, diameter123.5mm.
VariousVarious
Varnish
SHANGHAI BAOQING GENERALELECTRICALENGINEERINGCO.,LTD
DF-201D(F) MW 30-C. Rated 180°C.
Thermostat
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 12 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
5.0 Critical Unlisted CEC Components
Photo # Item no.
6 23
Frequency: Annual 1
Dimensions/thickness/assembly information
ContactsName Manufacturer/Trademark Type / model
Sensor SwitchFoshan GaomingChuandong MagneticElectronic Co., Ltd
CMS-14E-2
Various Brass H62. Type187.
Electrical Rating: 120Vac, 2.13AComponent Standard used: UL 61058-1 & CSA C 22.2 No. 61058-1MATERIALS LIST (refer to illustration 5 for assembly drawing)Component Manufacturer Type/model
Enclosure
WENZHOUJUXINGPLASTICS COLTD
PA66 / PA2RPG5Rated V-0, HAI=0, HWI=0, CTI=2, 65C, min.1.0mm thick.
Contact Point Various Various AgSn02 material.Terminal Various
5.82 0.99
VERIFICATION PROCESSTest Site: CEC Number of samples to test:
Live parts and dead metal 3000
Test Name Test Parameters
Overload CyclingVolts Current Power factor Number of cycles
120V, 60Hz
60s
50
Dielectric StrengthApply voltage Between Test Voltage Test Time
Live parts of opposite polarity 1500 60s
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 13 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
2. Mechanical Assembly - Components such as switches, fuseholders, connectors, wiring terminals and displaylamps are mounted and prevented from shifting or rotating by the use of lockwashers, starwashers, or othermounting format that prevents turning of the component.
3. Corrosion Protection - All ferrous metal parts are protected against corrosion by painting, plating or theequivalent.
4. Accessibility of Live Parts - All uninsulated live parts in primary circuitry are housed within a metal or non-metallic enclosure constructed with no openings other than those specifically described in Sections 4 and 5.
5. Grounding - All exposed dead-metal parts and all dead-metal parts within the enclosure that are exposed tocontact during any servicing operation and that are likely to become energized are reliably connected to thegrounding lead of the power supply cord.
6. Internal Wiring - Internal wiring is routed away from sharp or moving parts. Internal wiring leads terminatingin soldered connections are made mechanically secure prior to soldering. Recognized Componentseparable (quick disconnect) connectors of the positive detent type, closed loop connectors, or other typesspecifically described in the text of this report are also acceptable as internal wiring terminals. At pointswhere internal wiring passes through metal walls or partitions, the wiring insulation is protected againstabrasion or damage by plastic bushings or grommets.
7. Marking - The product is marked on a component labeling system as follows:- manufacturer’s name, trade name- model number- date of manufacture- electrical ratings (volts, power & frequency)- refer to Illustration 1 for details.
8. Cautionary Markings - Details refer to Illustration 1 for details.
9. Installation, Operating and Safety Instructions - Instructions for installation and use of this product areprovided by the manufacturer. Upper case and lower case letters shall not be less than 2.0 mm and 1.6 mmin height respectively. The phrases “IMPORTANT SAFEGUARDS” and “SAVE THESE INSTRUCTIONS”shall be in letters not less than 4.8 mm in height. (Refer to Illustration 2 to 2m for details.)
10. Carton Markings - The following are required: -The “HOUSEHOLD USE ONLY” or “HOUSEHOLD TYPE” must be located on at least one outsidesurface. -Appear in lettering not less than the height as specified: The dimension of the carton panel (mm) Minimum height of lettering (mm) 0~152 3.2 152~254 4.8 more than 254 6.4
Recognized Component - A component part, which has been previously evaluated by an accredited certificationbody with restrictions and must be evaluated as part of the basic product considering the restrictions as specifiedby the Conditions of Acceptability.
6.0 Critical Features
Unlisted Component - A part that has not been previously evaluated to the appropriate designated componentstandard. It may also be a Listed or Recognized component that is being used outside of its evaluated Listing orcomponent recognition.
1. Spacing - In primary circuits, minimum 1.6 mm spacing are maintained through air and over surfaces ofinsulating material between current-carrying parts of opposite polarity and between current-carrying parts anddead-metal parts.
Listed Component - A component part, which has been previously Listed or Certified by an accreditedCertification Organization with no restrictions and is used in the intended application within its ratings.
Critical Features/Components - An essential part, material, subassembly, system, software, or accessory of aproduct that has a direct bearing on the product’s conformance to applicable requirements of the productstandard.Construction Details - For specific construction details, reference should be made to the photographs anddescriptions. All dimensions are approximate unless specified as exact or within a tolerance. In addition to thespecific construction details described in this Report, the following general requirements also apply.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 14 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Illustration 1 - Marking
Cautionary Marking 1 on the lid
Cautionary Marking 2 on the lid
Cautionary Marking 3 on the Sensor Switch Cover
Note:
Alternative mutiple listee model: 2081 with brand name: SKG
6. Cautionary wordings "CAUTION! Do not let a magnet close." and their French or the equivalent wordingsmarked on the lid shall be not less than 2.4 mm high in letters.
7.0 Illustrations
1. ETL logo was not less than 8.0 mm in height and 8.0 mm in width, "Intertek" shall not be less than 3mm inheight, "C" and "US" shall not be less than 2mm in height. Control No. “5005804”, “CONFORMS TO UL STD.982” & “CERTIFIED TO CSA STD. C22.2 NO. 1335.1 & 1335.2.14”shall be in letters not less than 1.5 mm inheight.2. Date Code: "YYMM" will be marked on marking label. The "YY" mean the year and "MM" mean the month ofmanufacturer.3. “CAUTION: DO NOT IMMERSE IN WATER, FOR HOUSEHOLD USE ONLY, READ INSTRUCTIONSBEFORE USING” and their French or the equivalent marked under bottom surface shall not be less than 2.4 mmin height.
5. Cautionary wordings "CAUTION: NEVER CLEAN DISCHARGE OPENING WITH FINGERS WHEN JUICERIS OPERATING. CAUTION: UNPLUG BEFORE CLEANING AND BEFORE ASSEMBLY OR REMOVINGPARTS. ALWAYS USE FOOD PUSHER, Do not open until blades stop." and their French or the equivalentwordings marked on the lid shall be not less than 2.4 mm high in letters.
4. Cautionary wordings "CAUTION! DO NOT OPERATE WITHOUT THIS COVER LOCKED IN PLACE." andtheir French or the equivalent wordings marked on the lid shall be not less than 2.4 mm high in letters.
Alternative basic listee model: H8002Alternative mutiple listee model: NS8001A, NS8001B, NS8001C with brand name: Natalie Styx
CAUTION! DO NOT OPERATE WITHOUT THIS COVER LOCKED IN PLACE.
MISE EN GARDE! NE PAS FAIRE FONCTIONNER SANS LE COUVERCLE.
CAUTION: NEVER CLEAN DISCHARGE OPENING WITH FINGERS WHEN
JUICER IS OPERATING.
ATTENTION: ouverture de décharge Ne jamais nettoyer avec les doigts
lorsque Juicer est EXPLOITATION.
CAUTION: UNPLUG BEFORE CLEANING AND BEFORE ASSEMBLY OR
REMOVING PARTS. ALWAYS USE FOOD PUSHER, Do not open until blades
stop.
ATTENTION: Débranchez avant de le nettoyer Assemblée ou de pièces
Retrait. TOUJOURS UTILISER DES ALIMENTS POUSSE Ne pas ouvrir jusqu'à
l'arrêt des lames.
CAUTION! Do not let a magnet close.
MISE EN GARDE! Ne laissez pas l'aimant.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 15 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2 - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 16 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2a - Instruction Manual
Household use only.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 17 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2b - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 18 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2c - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 19 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2d - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 20 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2e - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 21 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2f - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 22 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2g - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 23 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2h - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 24 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2i - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 25 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2j - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 26 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2k - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 27 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2l - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 28 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 2m - Instruction Manual
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 29 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 3 - Circuit Diagram
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 30 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 4 - Motor drawing
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 31 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
7.0 Illustrations
Illustration 5 - Sensor Switch drawing
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 32 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Evaluation Period Project No. 160909081GZU
Sample Rec. Date 9/Sep/2016 Condition Prototype Sample ID.S160909081-001~006
Test Location
Test Procedure
UL 982 Issued:2015/06/10 Ed: 7Rev: 2015/06/24Clause
CSA C22.2No.1335.2.14Issued:1993/01/01(R2013); Gen.Inst. No. 1: 1993(See also CSAC22.2 No.1335.1Issued:1993/01/01(R2013); Gen.Inst. No. 1:1993)Clause
/
23 / /27 / /28 / /30 / /31 / /32 / /33 / /34 / /35 / /36 / /3853 / /56 / /57 / /61 / /
63 / /
65 / // 9 // 10 // 11 // 13 // 15.2.1 /
/ 15.3.1 /
/ 15.3.2 // 16 // 19.7 // 19.10.1 -19.10.3 // 20.1 // 21.2 // 24.15.2 // 25.15.1 /Strain Relief
Severe-use ConditionsStabilityImpact TestSwitch Overload Test
8.0 Test Summary
9/9/2016-12/9/2016
Intertek Testing Services Shenzhen Ltd. Guangzhou BranchAddress: Block E, No.7-2 Guang Dong Software Science Park, Caipin Road, GuangzhouScience City, GETDD, Guangzhou, China 510663.
Testing LabDetermination of the result includes consideration of measurement uncertainty from the test equipment andmethods. The product was tested as indicated below with results in conformance to the relevant test criteria.
Flooding of Live Parts Tests
StabilitySurface Temperatures
Leakage Current TestProtection Against Personal Injury
The following tests were performed:
Test Description
Operational TestsStarting Current Test
Push Back Relief Test
Leakage Current Following Humidity Test
Thermoplastic Coil Forms and Thermoplastic InsulatingMaterial
Flooding and Overflow (Motor-Operated Appliances)Leakage Current Following Humidity (Motor-OperatedAppliances)Water Spray (Motor-Operated Appliances)Electric Strength Test
Input TestNormal Temperature TestDielectric Voltage-Withstand Test
Strain Relief TestSwitch Overload Test
Starting Current TestPower Input and Current TestHeating (Normal Temperature) Test
Enclosures of Polymeric Material for Portable
Grounding Continuity Test
Locked Rotor Test
Leakage Current Test
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 33 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
8.0 Test Summary/ 27 /
/ 30.4 - 30.10 /
UL 61058-1Issued:2009/08/10 Ed: 4Rev: 2013/02/15Clause
CSA C 22.2 No.61058-1-09Ed:2, R2013Clause
/
15 15 /16 16 /17 17 /18 18 /
Completed by: Reviewed by:Title: Title:
Signature: Signature:
Enclosures of Polymeric Material for Portable andUnder-the-Cabinet Motor-Operated Appliances
Hoky Lin
A representative sample of the product covered by this report has been evaluated and found to comply with theapplicable requirements of the standards indicated in Section 1.0.
Provision for earthing
Test DescriptionInsulation resistance and dielectric strengthHeatingEnduranceMechanical strength
Signature on fileSignature on file
8.1 Signatures
Project EngineerJames FuTeam Leader
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 34 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
BASIC LISTEE
Address
CountryProduct
MULTIPLE LISTEE 1AddressCountry
Brand Name
ASSOCIATEDMANUFACTURER
Address
Country
BASIC LISTEE MODELS
H8001
MULTIPLE LISTEE 2AddressCountry
Brand Name
ASSOCIATEDMANUFACTURER
Address
Country
BASIC LISTEE MODELSH8001
MULTIPLE LISTEE 3AddressCountry
Brand Name
ASSOCIATEDMANUFACTURER
Address
Country
BASIC LISTEE MODELS
No.56 Donggang Avenue, Dongsheng District, ZHONGSHAN CITY GuangdongProvince 528414 CHINA
China
MULTIPLE LISTEE 3 MODELS
None
MULTIPLE LISTEE 1 MODELS
NS8001A, NS8001B, NS8001C
MULTIPLE LISTEE 2 MODELS2081
SKG (CHINA) LIMITEDNo.1 Tianhe Road Ronggui Street Shunde District, Foshan City, ChinaChinaSKG
Hong Kong
Zhongshan Lovas Electric Appliance Co.,LTD.
No.56 Donggang Avenue, Dongsheng District, ZHONGSHAN CITY GuangdongProvince 528414 CHINA
Zhongshan Lovas Electric Appliance Co.,LTD.
China
Natalie Styx
Natalie Styx Appliances (Hong Kong) Co., LtdOffice 3A-3, 12/F, Kaiser Centre, No.18 Centre Street, Sai Ying Pun, Hong Kong
9.0 Correlation Page For Multiple ListingsThe following products, which are identical to those identified in this report except for model number and Listeename, are authorized to bear the ETL label under provisions of the Intertek Multiple Listing Program.
Zhongshan Lovas Electric Appliance Co., LTD.
No.56 Donggang Avenue, Dongsheng District, ZHONGSHAN CITY GuangdongProvince 528414 CHINA
ChinaSlow Juicer
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 35 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
10.0 General InformationThe Applicant and Manufacturer have agreed to produce, test and label ETL Listed products in accordance withthe requirements of this Report. The Manufacturer has also agreed to notify Intertek and to request authorizationprior to using alternate parts, components or materials.
COMPONENTSComponents used shall be those itemized in this Intertek report covering the product, including any amendmentsand/or revisions.
LISTING MARKThe ETL Listing mark applied to the products shall either be separable in form, such as labels purchased fromIntertek, or on a product nameplate or other media only as specifically authorized by Intertek. Use of the mark issubject to the control of Intertek.
The mark must include the following four items:
1) applicable country identifiers "US" and/or "C" or "US", "C" and "EU"2) the word "Listed" or "Classified" or "Recognized Component" (whichever is appropriate)3) a control number issued by Intertek4) a product descriptor that identifies the standards used for certification. Example:
For US standards, the words, “Conforms to” shall appear with the standard number along with the word, “Standard” or “Std.” Example: “Conforms to ANSI/UL Std. XX.”
For Canadian standards, the words “Certified to CAN/CSA Standard CXX No. XX.” shall be used, orabbreviated, “Cert. to CAN/CSA Std. CXX No. XX.”
Can be used together when both standards are used.
Note: A facsimile must be submitted to Intertek, Attn: Follow-up Services for approval prior to use.The facsimile need not have a control number. A control number will be issued after signed CertificationAgreements have been received by the Follow-up Services office, approval of the facsimile of yourproposed Listing Mark, satisfactory completion of the Listing Report, and scheduling of a factoryassessment in your facility.
MANUFACTURING AND PRODUCTION TESTSManufacturing and Production Tests shall be performed as required in this Report.
FOLLOW‑UP SERVICEPeriodic unannounced audits of the manufacturing facility (and any locations authorized to apply the mark) shallbe scheduled by Intertek. An audit report shall be issued after each visit. Special attention will be given to thefollowing:
1. Conformance of the manufactured product to the descriptions in this Report.2. Conformance of the use of the ETL mark with the requirements of this Report and the Certification Agreement.3. Manufacturing changes.4. Performance of specified Manufacturing and Production Tests.
In the event that the Intertek representative identifies non-conformance(s) to any provision of this Report, theApplicant shall take one or more of the following actions:
1. Correct the non-conformance.2. Remove the ETL Mark from non-conforming product.3. Contact the issuing product safety evaluation center for instructions.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 36 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
10.1 Evaluation of Unlisted Components
Sample Disposition: Due to the destructive nature of the testing, all samples will bediscarded at the conclusion of testing unless, the manufacturer specifically requests thereturn of the samples. The request for return must accompany the initial component
shipment.
Because Unlisted Components are uncontrolled, and they do not fall under a third party follow up program,Intertek may require these components to be tested and/or evaluated at least once annually, more often forcertain components, as part of the independent certification process. The Unlisted Components in Section 5.0require testing and/or evaluation as indicated.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 37 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Product Test Voltage Test TimeAll products covered by this Report. 1000 60 s
or1200 1 s
Test Equipment
Products Requiring Grounding Continuity Test:All products covered by this Report.
11.2 Grounding Continuity TestMethod
Each cord-connected appliance having provision for grounding shall be tested, as a routine production-line test,to determine that grounding continuity exists between the ground blade of the attachment plug and theaccessible dead metal parts of the appliance that are likely to become energized.Only a single test need be conducted if the accessible metal selected is conductively connected by design to allother accessible metal.
Any indicating device such as an ohmmeter, a battery-and-buzzer combination, or the like, may be used todetermine compliance with the continuity requirements mentioned above.
- Dielectric Voltage Withstand Test- Grounding Continuity Test
11.0 Manufacturing and Production TestsThe manufacturer agrees to conduct the following Manufacturing and Production Tests as specified:
Required Tests
Products Requiring Dielectric Voltage Withstand Test:
The test equipment shall incorporate a transformer with an essentially sinusoidal output, a means to indicate theapplied test potential, and an audible and/or visual indicator of dielectric breakdown.The test equipment shall incorporate a voltmeter in the output circuit to indicate directly the applied test potentialif the rated output of the test equipment is less than 500VA.If the rated output of the test equipment is 500VA or more, the applied test potential may be indicated by either:1 - a voltmeter in the primary circuit;2 - a selector switch marked to indicate the test potential; or3 - a marking in a readily visible location to indicate the test potential for test equipment having a single testpotential output.In cases 2 and 3, the test equipment shall include a lamp or other visual means to indicate that the test potentialis present at the test equipment output. All test equipment shall be maintained in current calibration.
The test shall be conducted on products, which are fully assembled. Prior to applying the test potential, allswitches, contractors, relays, etc., should be closed so that all primary circuits are energized by the test potential.If all primary circuits cannot be tested at one time, then separate applications of the test potential shall be made.
The test voltage specified below shall be applied between primary circuits and accessible dead-metal parts. Thetest voltage may be gradually increased to the specified value but must be maintained at the specified value forone second or one minute as required.
Test Equipment
11.1 Dielectric Voltage Withstand TestMethod
One hundred percent of production of the products covered by this Report shall be subjected to a routineproduction line dielectric withstand test.
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 38 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Date/ Project Handler/Proj # Site ID Reviewer14-Sep-2017 Weapon Li 1.0 - Updated standard tittle to match GSSQ format.
170911099GZU 7.0 1Added marking label for multiple listee company "SKG(CHINA) LIMITED", model 2081 with brand name "SKG".
Benson Li 9.0 2Added multiple listee company "SKG (CHINA) LIMITED",model 2081 with brand name "SKG".
12.0 Revision SummaryThe following changes are in compliance with the declaration of Section 8.1:
Section Item Description of Change
ED 16.3.15 (20-Apr-17) Mandatory
Draft report
Report No. 160909081GZU-001Zhongshan Lovas Electric Appliance Co., LTD.
Page 39 of 39 DRAFT Issued: 14-Sep-2017For Review and Comment
Date/ Project Handler/Proj # Site ID Reviewer
12.0 Revision SummaryThe following changes are in compliance with the declaration of Section 8.1:
Section Item Description of Change
ED 16.3.15 (20-Apr-17) Mandatory
Draft report