DR-Range · L Min. Swing Radius 2,420 mm M Shipping Length 6,930 mm N Max. Reach c/w Hammer 9,914 mm AKULA DRRange Dimensions * Specification may change due to constant ongoing development

World

Clas

s Briti

sh En

ginee

ring

DR-Range

WORLD’S FIRSTThe

Dual Diesel AND Electric Remote Control Demolition, Mining & Tunnelling Robot

up to72kW• 100% Designed & Manufactured in the UK• Diesel Powered by world leading Kubota engine• Industry’s safest & most flexible radio remote

control system

• Sophisticated hydraulics for increased power & smooth operation

• Intelligent ES Robotics Robo Power

• 2 Speed Tracking

• Intelligent DC Motor, requiring 30% smaller generator

• DR125 includes expanding undercarriage

• IP Protection = IP65 for the Transmitter + IP66 for the Receiver units

• Transmitter Casing Material = charged nylon UL94 HB

• Range = 100m when using 434.040-434.790MHz at 10Mw power, this is an average distance, in good conditions range can reach 170m.

• Autonomy at 20° = 22 hours

• Operating and Storage Temp = -25° + 70° / -40°-+85°

Features

The highest standard of safety features continue including a stop system with a PLe Cat 4 to ISO 13849-1 2006, command joysticks are PLd CAT3 ISO 13849-1 2006 and all levers and push buttons are PLc CAT2 ISO 13849-1 2006. The flexibility of the unit is unrivalled with three operating frequencies available being 433.050-434.790MHz, 434.040-434.790MHz & 2.4GHz with a possible 16 channels.

Safety & security continue with the option to have a coded start procedure. This enhances security and ensures that the unit cannot be started without an authorised user, which also further ensures that only trained, skilled and certified operatives are empowered to start and operate the machinery. The operating range is up to an impressive 200m metres when using 434.040-434.790MHz at 10Mw power. Operating and Storage Temperatures are -25° + 70° / -40°-+85°.

With the autonomy of 24 hours at 20 degrees, and impressive empty to full charge of just 1 hour the #Akula Radio Remote system truly has it all. Each unit is supplied with a spare battery free of charge. If this wasn’t enough, we’re so confident of the units build quality & reliability that we are putting a full 3 years warranty on all electronic components and two years on all mechanical components!

Safety Levels

• STOP – Ple Cat 4 (ISO 13849-1 2006)

• Command – Joystick – PLd CAT 3 (ISO 13849-1 2006)

• Levers / Pushbuttons – PLc CAT 2 (ISO 13849-1 2006)

ES Robotics #Akula Radio Remote Control

The custom built ES Robotics #Akula Radio Remote Control has been designed to provide the utmost safety, quality, reliability & performance. The unit features a large intelligent display giving the operator full & detailed feedback at all times such as oil temperature, engine warning lights, fuel & more.

The transmitter casing is not only IP66 rated, but is custom built using the most robust material Nylon UL94 HB to take the most serious of abuse that any site can offer. Amongst the many safety features, making this transmitter the safest in the market place, are an anti-tilt function whereby if the user slips, trips or falls all commands are instantly disabled. There is absolutely no danger of any #Akula Robot accidentally slewing or flying off out of control.

Operating Frequency

• Option 1 = 433.050-434.790MHz

• Option 2 = 434.040-434.790MHz

• Option 3 = 2.4GHz (16 channels)

* Specification may change due to constant ongoing development

Revolutionary World First

With our world leading British engineers the #Akula range offers a truly huge step forward in Demolition, Mining & Tunnelling Machines with the WORLDS FIRST & ONLY machine to be able to operate in Diesel OR Electric mode within the same machine. No more paying double money for two machines for the two power sources! ES Robotics #Akula machines can simply operate in Diesel OR Electric mode at the flick of a switch on the remote! No more unloading issues with your electric machine taking hours, or even days to get the machine from one side of your site to the opening of your tunnel or mine. Simply track the machine in Diesel mode, then switch to electric mode when you need clean, exhaust free electric operation!

Diesel Power Unit

When used in diesel mode the #Akula DR-Range uses the latest world leading Kubota water cooled engine, giving an impressive amount of power. Kubota’s tough and reliable engines are world renowned. Engineered with the power to maximise performance, it also delivers minimised noise and vibration, meeting all current engine emission regulations. In electric mode the Robo powered DC motor continues to deliver impressive power!

Intelligent Hydraulics

When simultaneous operation of numerous functions are required, two variable pumps will distribute an accurate amount of oil flow to each actuator according to the lever stroke. This process enables continuous high performance across all operations. The intelligent proportional valves offer the very latest in hydraulic technology.

The powerful hydraulic force of the #Akula DR-Range delivers an impressive bucket digging force. Its powerful and well-balanced arm and bucket allow the operator to dig faster, deeper and more efficiently

even in the toughest conditions.

When operating attachments such as Hammers, Shears or Crushers the #Akula DR-Range increases productivity with its impressive intelligent hydraulics, patented Robo Power TechDivert system.

It offers powerful workability and excellent stability without the need of additional weights, that are often required by other demolition robots.


Single or Double Dozer Blade?

Each #Akula Robot has the option for either Single or Double Dozer blades to be installed. Double are supplied as standard. Whether you want the same all round or Dozer at the front, rear or both ES Robotics offers full flexibility. The Akula Robots offer stability and the ease of clearance with the option of the Double Dozer blade.

288

381

213110

125 50308

150

398

100

218

Electric Power Unit

One of the biggest steps forward for the industry is with ES Robotics Robo Power DC Motor. The ultra-smooth wave form produced, in conjunction with its control inverter give truly unrivalled performance. With fully adjustable speed, torque & load sensing this DC Motor gives peak performance 100% of the time. The motor will run off reduced voltage supplies without any detrimental effects to the machine what so ever. Therefore these intelligent DC motors coupled with Robo Power require dramatically smaller generators to power the units compared to the leading competition.

Akula DR-Range Diesel Output

DR125 14kW

DR300 20kW

DR450 46kW

DR850 48kW

Akula DR-Range DC Output

DR125 68kW

DR300 68kW

DR450 72kW

DR850 72kW

Rubber or Metal Tracks

Each #Akula Robot comes with rubber tracks as standard. Metal tracks are available as an alternative upgrade on every model. The metal tracks can then also be supplied with “Rubber Street blocks” if there is sensitive ground to work on. Once again the #Akula range offers you full flexibility.

Bespoke length booms can be made to order to suit your specific application

AKULA DR125 DimensionsA Blade(s) Width 1,240 mm

B Min. Tail Turning Radius 620 mm

C Main Body Width 990 mm

D Overall Width (expandable)* 990 mm

F Tumbler Distance 1,230 mm

G Blade Max. Lift Above Ground 280 mm

H Blade Max. Drop Below Ground 190 mm

I Machine Overall Height 1,100 mm

J Max. Height Reach c/w Hammer 5,600 mm

K Max. Depth c/w Hammer 3,795 mm

L Min. Swing Radius 1,440 mm

M Shipping Length 3,545 mm

N Max. Reach c/w Hammer 5,117 mm


B Min. Tail Turning Radius 790 mm

C Main Body Width 1,350 mm

D Overall Width 1,500 mm











B Min. Tail Turning Radius 1,290 mm













B Min. Tail Turning Radius 1,500 mm












AKULA DRRange Dimensions


AKULA DRRange Dimensions

* AKULA DR125 comes with expanding undercarriage, 990 mm expanding to 1240 mm.


Diesel Engine

Model D1105-E4

TypeWater-cooled, diesel engine E-TVCS (Economical, ecological type)

Output ISO9249PS/rpm 25.44 / 2,400

kW/rpm 18.72 / 2,700

Number of cylinders 3

Bore x Stroke mm 78 x 78.4

Displacement cc 1123

Electric Motor

Maximum Power 68kw

Power Type ES Robotics Robo Power

Recommended Fuse Size 63amps

Starting Type Soft Start

Swivelling speed rpm 9.9

Rubber shoe width mm 300

Tumbler distance mm 1,560

Dozer size 1 (width x height) mm (Option to custom modify) 1,500 x 300


Hydraulic pumps. Equipped with Robo Power TechDivert

P1, P2 Variable displacement pump

Flow rate l/min 34.56 x 2 + Robo Divert Boost

Hydraulic pressure MPa (kgf/cm2) 25.92 , 259 bar + Robo Divert Boost

P3 Gear Type

Flow rate l/min 25.34 + Robo Divert Boost


Hydraulic reservoir l 23

Fuel tank capacity l 34

Max. travelling speed Low km/h 2.7

High km/h 4.9

Ground clearance mm 290

Recommended Attachment Max Weight (Boom Upgrades Available) 500 Kg

Weight 3,000 Kg

AKULA DR300 Spec SheetAKULA DR125 Spec Sheet

Diesel Engine

Model D902

Type Water-cooled, diesel engine

Output ISO9249 PS/rpm 16 / 2,300

kW/rpm 14.16 / 2,700


Bore x Stroke mm 72 x 73.6

Displacement cc 898

Electric Motor

Maximum Power 68kW












Hydraulic pressure MPa (kgf/cm2) 25.92, 259 bar + Robo Divert Boost

P3 Gear Type






High km/h 4.3



Weight 1,600 Kg

* Specification may change due to constant ongoing development* Specification may change due to constant ongoing development

Diesel Engine

Model V2607-DI-EU6

Type Water-cooled, diesel engine

Output ISO9249 PS/rpm

kW/rpm 46.0 / 2,200


Bore x Stroke mm 87 x 1,100

Displacement cc 2,615

Electric Motor

Maximum Power 72kw













P3 Gear Type






High km/h 5



Weight 5,000 Kg

AKULA DR850 Spec SheetAKULA DR450 Spec Sheet

Diesel Engine

Model V3307-CR-TE4

TypeWater-cooled, diesel engine E-CDIS (with CRS and DPF). Tier 4 & US EPA

Output ISO9249 PS/rpm 65.0 / 2,000

kW/rpm 47.8 / 2,000


Bore x Stroke mm 94 x 120

Displacement cc 3,331

Electric Motor

Maximum Power 72kw













Aux 1 Flow Rate l/min 120 + Robo Divert Boost


Aux 2 Flow Rate l/min 120 + Robo Divert Boost




Max. travelling speedLow km/h 2.9

High km/h 5


Recommended Attachment Max Weight (Boom Upgrades Available) 1,200 Kg

Weight 8,500 Kg

* Specification may change due to constant ongoing development* Specification may change due to constant ongoing development

AKULA ACCESSORIES

AKHC 02 AKHC 03 AKHC 05ND* AKHC 10ND* AKHC 13D* AKHC 15ND* AKHC 20ND*

Kg. 250 300 550 1020 1400 1730 2040

A mm. 290 385 480 685 610 820 890

B mm. 1120 1165 1300 1550 1750 1775 1900

C mm. 25 35 50 60 60 70 70

m m. 90 140 140 140 180 180 180

X t. 99 102 74 120 137 243 299

Y t. 21 27 25 41 45 65 75

Ø mm. 15 18 20 25 30 30 40

bar 250 250 300 340 340 340 340

I/min. 40 / 60 60 / 80 80 / 150 150 / 250 180 / 250 180 / 250 200 / 300

max bar 120 120 120 140 140 140 140

max I/min. 5 5 10 10 10 10 10

PRIMARY CRUSHERAKHC Range

model (2)(2)(1)

tonmodel (2)(2)

(1)

ton

AKHC 02 15 2 3 3.5 AKHC 10ND 9 10 15 17

AKHC 03 3.5 4 5 5.5 AKHC 13D 18 20 25 27

AKHC 05ND 5.5 6 9 10 AKHC 15ND 15 16 21 23

AKHC 25ND* AKHC 40 AKHC 50 AKHC 60 AKHC 80 AKHC 100 AKHC 120 AKHC 140 AKHC 250

Kg. 2670 3680 4850 6580 8700 10900 12200 14300 27500

A mm. 1090 1370 1500 1680 1830 2050 2305 2860 3100

B mm. 2115 2520 2690 2950 3160 3350 3700 3630 5000

C mm. 80 90 100 100 120 120 130 120 170

mm. 220 260 325 325 325 400 400 / /

X t. 311 424 470 590 811 857 972 / /

Y t. 82 99 120 145 185 220 240 250 425

Ø mm. 40 50 60 70 80 90 100 / /

bar 340 340 340 340 340 340 340 350 350

I/min. 250 / 350 300 / 400 350 / 450 400 / 500 450 / 650 500 / 800 500 / 800 500 / 800 1000 / 1300

max bar 140 140 140 140 140 140 140 140 250

max I/min. 10 10 30 30 50 50 50 50 50

/ / √ √ √ √ √ √ √

*Bolted Interchangeable teeth version provided/ **Recommended for 20 to 25 t. excavator with demolition long boom

Optimum excavator equipment combination Possible excavator equipment combination

model (2)(2)(1)

tonmodel (2)(2)

(1)

tonmodel (2)(2)

(1)

ton

AKHC 20 21 22 28 30 AKHC 60 64 66 85 88 AKHC 120 84 86 150 165

AKHC 25ND 28 29 35 38 AKHC 80 84 86 105 110 AKHC 140 110 120 180 210

AKHC 40 34 36 49 52 AKHC 100 84 86 130 135 AKHC 250 200 250 300 350

AKHC 50 48 50 65 68

AKMK 07* AKMK 10* AKMK 13* AKMK 15 AKMK 20 AKMK 25 AKMK 35 AKMK 50 AKMK 70

Kg. 410 570 795 1205 1490 1970 2150 3470 5020

H1** mm. 810 1000 1055 1220 1330 1370 1375 1540 1720

bar 300 340 340 340 340 340 340 340 340

I/min. 80 / 150 150 / 250 180 / 250 180 / 250 200 / 300 250 / 350 300 / 400 400 / 500 450 / 600

max bar 140 140 140 140 140 140 140 140 140

max I/min. 10 10 10 10 10 10 10 30 30

model (2)(2)(1)

tonmodel (2)(2)

(1)

ton

AKMK 07 6 7 9 10 AKMK 25 33 35 45 48

AKMK 10 8 9 12 14 AKMK 35 43 45 60 65

AKMK 13 11 12 18 20 AKMK 50 58 60 75 80

AKMK 15 17 18 25 27 AKMK 70 72 75 100 110

AKMK 20 24 25 35 38

Kit AKFR

AKMK 07 AKMK 10 AKMK 13 AKMK 15 AKMK 20 AKMK 25 AKMK 35 AKMK 50 AKMK 70

Kg. 250 410 635 680 1035 1270 1720 2940 3940

A mm. 530 660 720 740 880 905 970 1100 1300

B mm. 510 610 630 660 790 820 860 1030 1130

C mm. 175 195 235 300 310 360 390 440 500

D mm. 305 355 390 465 485 570 640 720 770

mm. 140 140 180 220 260 260 260 260 325

H2** mm. 660 760 870 890 1045 1100 1210 1440 1580

X t. 80 121 137 208 225 318 362 400 535

Y t. 43 66 71 110 137 148 165 220 285

Z t. 32 44 55 71 88 115 126 140 190

Ø mm. 20 25 30 35 40 45 50 60 75

*Mechanical version/ **H=H1+H2

PULVERIZER

Kit AKCS


Kg. 210 360 580 630 950 1240 1425 2290 2850

A mm. 250 320 400 420 480 500 525 575 700

B mm. 325 390 450 485 525 560 565 660 755

C mm. 65 75 80 100 120 130 130 135 165

D mm. 250 300 300 330 380 435 435 480 550

mm. 310 370 410 470 510 565 565 660 755

H2** mm. 545 630 725 775 890 935 990 1150 1300

X t. 188 274 340 461 565 790 812 875 1100

Y t. 75 110 132 170 258 318 345 385 470

Z t. 43 66 82 93 137 159 175 205 240

Ø mm. 30 35 40 50 60 65 70 90 110

IPN max bar 80 120 140 210 360 380 400 500 600

HEA max min. / 100 120 140 230 250 260 300 400


SHEAR

MULTI KITAKMK RangeKit AKCB


Kg. * 450 585 720 1090 1305 1780 2900 3890

A mm. * 580 640 740 810 850 910 990 1160

B mm. * 560 700 720 800 815 875 1065 1180

C mm. * 100 100 110 130 130 130 175 185

D mm. * 290 310 320 350 410 410 560 610

mm. * 350 400 420 480 500 500 575 640

H2** mm. * 800 920 1000 1125 1155 1255 1490 1640

X t. * 241 296 461 559 768 812 900 1010

Y t. * 66 71 110 137 170 192 220 290

Z t. * 44 55 71 88 110 126 140 185

Ø mm. * 30 35 40 45 50 55 70 85

COMBI CUTTER

Kit AKCH


Kg. 225 380 610 740 1000 1300 1590 2720 *

A mm. 310 390 445 500 635 550 720 880 *

B mm. 420 470 580 615 750 785 960 1025 *

C mm. 160 185 235 275 295 350 350 425 *

D mm. 275 320 335 395 415 475 475 565 *

mm. 340 400 530 530 660 600 750 875 *

H2** mm. 650 755 900 910 1080 1100 1280 1480 *

X t. 123 160 269 285 411 790 812 810 *

Y t. 70 95 115 126 165 236 241 270 *

Z t. 43 55 66 88 110 143 148 150 *

Ø mm. 30 35 40 45 50 55 60 65 *

SWISS

Kit AKHC


Kg. 250 435 575 680 1075 1235 1700 2750 *

A mm. 525 600 740 835 920 945 1010 1150 *

B mm. 490 610 710 740 765 815 875 1070 *

C mm. 90 100 100 110 130 130 130 175 *

D mm. 240 300 300 340 350 400 450 550 *

mm. 125 150 200 175 240 250 250 290 *

H2** mm. 690 810 925 1005 1125 1170 1275 1500 *

X t. 107 148 181 241 311 384 422 465 *

Y t. 48 66 82 99 120 165 197 220 *

Z t. 32 44 55 71 93 115 126 140 *

Ø mm. 20 25 30 35 40 45 50 60 *

CRUSHER

Kit AKCL


Kg. * * * 560 1000 1400 1750 2860 *

A mm. * * * 270 350 370 400 460 *

B mm. * * * 360 465 520 580 680 *

C mm. * * * 115 145 150 160 185 *

D mm. * * * 310 390 440 480 560 *

mm. * * * 320 400 430 500 580 *

H2** mm. * * * 505 630 695 750 850 *

X t. * * * 241 296 351 384 440 *

Y t. * * * 165 219 247 252 285 *

Z t. / / / 121 154 175 186 215 *

mm. * * * 10 12 14 16 18 *

Table Key

A = Max jaw opening

B = Length of the attachment

C or D = Thickness of the Jaw.

X = Cutting Force

Y = Force at tip of Jaw.

Z= Force at the tip of the Jaw only on the FR kit of the MK, where we have considered 3 forces (X= Blade, Y= Middle Jaw, Z= Tip)

PLATE SHEAR

model (2)(2)(1)

ton

(2)(2)

(1)

tonmodel (2)(2)

(1)

ton

(2)(2)

(1)

ton

AKCS 03R 1.5 2 3 3.5 and 3.5 4 5 5.5 AKCS 40RS 24 25 30 32 and 39 40 50 53

AKCS 05R 2.5 3 4 4.5 and 4.5 5 8 9 AKCS 50RS 29 30 35 38 and 48 50 60 63

AKCS 07RS 3.5 4 7 8 and 7 8 12 14 AKCS 55RS 33 35 40 43 and 58 60 70 73

AKCS 12RS 6 7 10 12 and 11 12 18 20 AKCS 70RS 43 45 90 52 and 73 75 100 105





AKCS 40RS AKCS 50RS AKCS 55RS AKCS 70RS AKCS 90RS AKCS 160RS AKCS 200RS

Kg. 4030 4800 6200 7900 10300 16700 19500

A mm. 660 725 780 845 920 1100 1180

B mm. 610 675 690 710 780 1080 1130

C mm. 865 865 1000 1100 1200 1325 1750

L mm. 3420 3660 3905 4190 4400 5440 5580

X t. 600 690 700 815 1075 1495 1540

Y t. 270 285 290 375 480 610 690

Z mm. 145 153 160 205 265 330 350

bar 340 340 340 340 340 340 340

I/min. 300 / 400 350 / 450 400 / 500 450 / 600 500 / 800 800 / 1000 900 / 1200

max bar 140 140 140 140 140 250 140

max I/min. 10 10 30 30 50 50 50

/ / √ √ √ √ √

PLATE SHEARAKCS Range

AKCS 03R AKCS 05R AKCS 07RS AKCS 12RS AKCS 20RS AKCS 25RS AKCS 30RS

Kg. 300 465 880 1180 2050 2650 3000

A mm. 265 340 405 475 535 570 615

B mm. 230 320 370 385 445 505 545

C mm. 380 460 570 570 715 715 715

L mm. 1330 1725 2180 2300 2660 2950 3130

X t. 108 123 236 247 274 461 550

Y t. 51 56 99 104 121 197 230

Z mm. 28 34 55 60 66 110 125

bar 250 280 340 340 340 340 340

I/min. 80 / 100 80 / 150 100 / 150 150 / 250 180 / 250 200 / 300 200 / 300

max bar 120 120 140 140 140 140 140

max I/min. 5 10 10 10 10 10 10

HYDRAULIC HAMMER

Unique Valve DesignEasy maintenance. It lessens pressure fluctuation, and therefore any potential damage to the machine driving it.

AccumulatorThe accumulator compensates for and any high pressure surges in the hydraulic circuit.

Tool BushHigh Quality Work ToolManufactured from high grade steel & heat treated for performance. Moil point & chisels are available.

Piston StrokeThe piston is manufactured from heat treated high grade steel and has a long stroke which minimises recoil.

Fully Sealed EnclosureHigh quality heat treated fully enclosed welded body to reduce noise & increase lifespan.

Ease Of MaintenanceWith fewer components, ample space & high quality components maintenance is both quick & easy.

WORKING CAPACITY(8hr/day)

Non-reinforced concrete (t:30cm)

Reinforced concrete (t:30cm)

Hard rock

ESB02

ESB04

ESB05

ESB06

ESB08

ESB10

ESB12

5 50 100 200 300 400 500 600 700 800 900 1000m3

Front HeadThe front head prevents the whole Hammer taking each blow. The body is also hardened & heat treated ensuring a longer life.

Model Number ESB 04 ESB 05 ESB 06 ESB 08 ESB 10 ESB 12

Suitable Excavator tonne 4 - 7 8.5 11 - 16 19 - 26 28 - 40 40 - 55

Suitable Excavator lbs 8800 – 15400 18700 24200 - 35200 41800 - 57200 61600 - 88000 88000 - 121000

Chisel Diameter mm 75 85 100 140 155 175

Total Weight kg 421 577 973 1989 2950 4210

Total Weight lbs lbs 926.2 1269.4 2140.6 4375.8 6490 9262

Overall Length mm 1528 1920 2260 2810 3152 3400

Operating Pressure kg/cm2 110-160 120-170 150-170 160-180 160-180 160-180

Oil Flow l/min 30-45 45-85 80-120 130-170 170-220 210-290

Impact Rate BPM 500-800 400-700 400-700 400-600 250-400 200-350

Energy Class Joules 1300 1749 4200 6500 10500 12000

Energy Class ft lb 958.70 1289.82 3097.35 4793.51 7743.36 8850.74

Hose Diameter inch 1/2" 3/4" 3/4" 1" 1" 1.25"

The ES Manufacturing Ltd Molotok Hydraulic Hammer incorporates the very latest World Class British Design, engineering, reliability & quality developed for the very toughest of environments. With many Hammers sold throughout the world to countries including the USA, Canada, South Africa & Australia the Molotok has proven quality & durability.

Every Molotok Hammer is supplied with:

• 2 Points / Chisels• Head Bracket• 2 Head Bracket Pins• 2 Hydraulic Hoses & Couplings• Tool Box• Gas Bottle• Instruction Manual• Parts Manual• CE Certificate Of Conformity

Impressive Impact Rate – Where time is moneyThe Blows Per Minute (BPM), and more so the force of these blows, that the Molotok delivers is unrivalled. Using innovative technology & first class engineering it delivers a more aggressive, harder & deeper impact than the leading competition which simply equates to the job getting done quicker & more efficiently.

Energy ClassMolotok Hammers range from 121ft lb / 165 Joules through to an impressively substantial 8850 ft lb / 12000 Joules.

Model Number ESB 00 ESB 01 ESB 02

Suitable Excavator tonne 0.8 - 1.6 1.2 - 3 2 - 4

Suitable Excavator lbs 1760 - 3520 2600 - 6600 4400 - 8800

Chisel Diameter mm 40 45 53

Total Weight kg 90 125 180

Total Weight lbs lbs 198 275 396

Overall Length mm 983 1100 1100

Operating Pressure kg/cm2 90-120 90-120 90-120

Oil Flow l/min 15-25 15-25 15-25

Impact Rate BPM 800-1400 700-1200 700-1200

Energy Class Joules 165 277 900

Energy Class ft lb 121.68 204.28 663.72

Hose Diameter inch 1/2” 1/2" 1/2"

ES Manufacturing Ltd14 Pulloxhill Business Park, Greenfield Road, Pulloxhill, Bedfordshire MK45 5EUTel: 01525 719994 Email: [email protected] www.esmanufac.com

World Class British Engineering

DR125 DR-Range

Documents

DR-Range · L Min. Swing Radius 2,420 mm M Shipping Length 6,930 mm N Max. Reach c/w Hammer 9,914 mm AKULA DRRange Dimensions * Specification may change due to constant ongoing development