Upload
kristopher-raybourn
View
221
Download
0
Tags:
Embed Size (px)
Citation preview
Dr. Kalpakis
CMSC 421, Operating Systems
http://www.csee.umbc.edu/~kalpakis/Courses/421
Virtual Memory
CMSC 421
2
Outline
Background
Demand Paging
Process Creation
Page Replacement
Allocation of Frames
Thrashing
Operating System Examples
CMSC 421
3
Background
Virtual memory
enables the separation of user logical memory from physical memory.
moreover
Only part of the program needs to be in memory for execution.
Logical address space can therefore be much larger than physical address
space.
Allows address spaces to be shared by several processes.
Allows for more efficient process creation.
Virtual memory can be implemented via
Demand paging
Demand segmentation
CMSC 421
4
Virtual Memory That is Larger Than Physical Memory
CMSC 421
5
Demand Paging
Bring a page into memory only when it is needed.
Less I/O needed
Less memory needed
Faster response
More users
Page is needed there is a (memory) reference to it
invalid reference abort
not-in-memory bring to memory
CMSC 421
6
Transfer of a Paged Memory to Contiguous Disk Space
CMSC 421
7
Valid-Invalid Bit
With each page table entry a valid–invalid bit is associated
(1 in-memory, 0 not-in-memory)
Initially valid–invalid but is set to 0 on all entries.
Example of a page table snapshot.
During address translation,
if valid–invalid bit in page table entry is 0 page fault.
11110
00
Frame # valid-invalid bit
page table
CMSC 421
8
Page Table When Some Pages Are Not in Main Memory
CMSC 421
9
Page Fault
If there is ever a reference to a page, first reference will trap to OS page fault
OS looks at another table to decide:
Invalid reference abort.
Just not in memory.
Get empty frame.
Swap page into frame.
Reset tables, valid bit = 1.
Restart instruction
Problems
block move
auto increment/decrement location
CMSC 421
10
Steps in Handling a Page Fault
CMSC 421
11
What happens if there is no free frame?
Page replacement
find some page in memory, but not really in use, swap it out.
Algorithm performance
want an algorithm which will result in minimum number of page faults.
Same page may be brought into memory several times.
In general to implement demand paging we need
A Frame-allocation algorithm
A page-replacement algorithm
CMSC 421
12
Performance of Demand Paging
Page Fault Rate 0 p 1.0
if p = 0 no page faults
if p = 1, every reference is a fault
Effective Access Time (EAT)
EAT = (1 – p) x memory access
+ p ([page fault overhead]
+ [swap page out ]
+ [swap page in]
+ [restart overhead])
CMSC 421
13
Demand Paging Example
Memory access time = 1 microsecond
50% of the time the page that is being replaced has been
modified and therefore needs to be swapped out.
Swap Page Time = 10 msec = 10,000 msec
EAT = (1 – p) x 1 + p (15000)
1 + 15000p (in msec)
CMSC 421
14
Process Creation
Virtual memory allows other benefits during process creation:
Copy-on-Write
Memory-Mapped Files
CMSC 421
15
Copy-on-Write
Copy-on-Write (COW) allows both parent and child processes
to initially share the same pages in memory.
If either process modifies a shared page, only then is the page copied.
COW allows more efficient process creation as only modified
pages are copied.
Free pages are allocated from a pool of zeroed-out pages.
CMSC 421
16
Memory-Mapped Files
Memory-mapped file I/O allows file I/O to be treated as routine memory
access by mapping a disk block to a page in memory.
A file is initially read using demand paging. A page-sized portion of the file
is read from the file system into a physical page. Subsequent reads/writes
to/from the file are treated as ordinary memory accesses.
Simplifies file access by treating file I/O through memory rather than read()
write() system calls.
Also allows several processes to map the same file allowing the pages in
memory to be shared.
CMSC 421
17
Memory Mapped Files
CMSC 421
18
Page Replacement
Prevent over-allocation of memory by modifying page-fault
service routine to include page replacement.
Use modify (dirty) bit to reduce overhead of page transfers
only modified pages are written to disk.
Page replacement completes separation between logical
memory and physical memory
large virtual memory can be provided on a smaller physical memory.
CMSC 421
19
Need For Page Replacement
CMSC 421
20
Basic Page Replacement
1. Find the location of the desired page on disk.
2. Find a free frame:
- If there is a free frame, use it.
- If there is no free frame, use a page replacement
algorithm to select a victim frame.
3. Read the desired page into the (newly) free frame. Update the
page and frame tables.
4. Restart the process.
CMSC 421
21
Page Replacement
CMSC 421
22
Page Replacement Algorithms
Want lowest page-fault rate.
Evaluate algorithm by
running it on a particular string of memory references (reference string)
and then
computing the number of page faults on that string.
In all our examples, the reference string is
1, 2, 3, 4, 1, 2, 5, 1, 2, 3, 4, 5.
CMSC 421
23
Graph of Page Faults Versus The Number of Frames
CMSC 421
24
First-In-First-Out (FIFO) Algorithm
Reference string: 1, 2, 3, 4, 1, 2, 5, 1, 2, 3, 4, 5
3 frames (3 pages can be in memory at a time per process)
4 frames
FIFO Replacement – Belady’s Anomalymore frames less page faults
1
2
3
1
2
3
4
1
2
5
3
4
9 page faults
1
2
3
1
2
3
5
1
2
4
5 10 page faults
44 3
CMSC 421
25
FIFO Page Replacement
CMSC 421
26
FIFO Illustrating Belady’s Anomaly
CMSC 421
27
Optimal Algorithm
Replace page that will not be used for longest period of time.
4 frames example
1, 2, 3, 4, 1, 2, 5, 1, 2, 3, 4, 5
How do we know this (what page will not be used for longest period of time) ?
It is used for measuring how well your algorithm performs.
1
2
3
4
6 page faults
4 5
CMSC 421
28
Optimal Page Replacement
CMSC 421
29
Least Recently Used (LRU) Algorithm
Reference string: 1, 2, 3, 4, 1, 2, 5, 1, 2, 3, 4, 5
Counter implementation
Every page entry has a counter; every time page is referenced through
this entry, copy the clock into the counter.
When a page needs to be selected as a victim, look at the counters to
determine which to select (in increasing clock order).
1
2
3
5
4
4 3
5
CMSC 421
30
LRU Page Replacement
CMSC 421
31
LRU Algorithm (Cont.)
Stack implementation
keep a stack of page numbers in a double link form:
Whenever a page is referenced
move it to the top
requires 6 pointers to be changed
No search for replacement
CMSC 421
32
Use Of A Stack to Record The Most Recent Page References
CMSC 421
33
Stack Page-replacement Algorithms
It is an algorithm that the set of pages in memory for n frames is
always a subset of the set of pages in memory for n+1 frames
They never exhibit Belady’s anomaly
Example Stack algorithms
Optimal
LRU
CMSC 421
34
LRU Approximation Algorithms
Reference bit
With each page associate a bit, initially = 0
When page is referenced bit set to 1.
Replace the one which is 0 (if one exists). We do not know the order, however.
Scheme can be extended to multiple reference bits (as a page reference)
Set high-order bit to 1 at each reference; right shift periodically, replace page with smallest value)
Second chance (Clock algorithm)
Need reference bit and Clock (page arrival time)
If page to be replaced (in clock order) has reference bit = 1. then:
set reference bit 0 and reset its clock value.
leave page in memory.
replace next page (in clock order), subject to same rules.
Can also be implemented using a circular queue of pages
Can be extended to also consider a “dirty” bit
CMSC 421
35
Second-Chance (clock) Page-Replacement Algorithm
CMSC 421
36
Counting Algorithms
Keep a counter of the number of references that have been
made to each page.
LFU Algorithm
replaces page with smallest count.
MFU Algorithm
Replace page with largest count
It is based on the argument that the page with the smallest count was
probably just brought in and has yet to be used.
CMSC 421
37
Allocation of Frames
Each process needs minimum number of pages.
Example: IBM 370 – 6 pages to handle SS MOVE instruction:
instruction is 6 bytes, might span 2 pages.
2 pages to handle from.
2 pages to handle to.
Two major allocation schemes.
fixed allocation
priority allocation
CMSC 421
38
Fixed Allocation
Equal allocation – e.g., if 100 frames and 5
processes, give each 20 pages.
Proportional allocation – Allocate according to the
size of process.
mSs
pa
m
sS
ps
iii
i
ii
for allocation
frames of number total
process of size
5964137127
56413710
127
10
64
2
1
2
a
a
s
s
m
i
CMSC 421
39
Priority Allocation
Use a proportional allocation scheme using priorities rather than
size.
If process Pi generates a page fault,
select for replacement one of its frames.
select for replacement a frame from a process with lower priority
number.
CMSC 421
40
Global vs. Local Allocation
Global replacement
process selects a replacement frame from the set of all frames
one process can take a frame from another.
Local replacement
each process selects from only its own set of allocated frames.
Global replacement offers better throughput
Local replacement offers lower variance in response time
CMSC 421
41
Thrashing
If a process does not have “enough” pages, the page-fault rate is
very high. This leads to:
low CPU utilization.
operating system thinks that it needs to increase the degree of
multiprogramming.
another process added to the system.
Thrashing a process is busy swapping pages in and out.
CMSC 421
42
Thrashing
Why does paging work?Locality model
Process migrates from one locality to another.
Localities may overlap.
Why does thrashing occur? size of locality > total memory size
CMSC 421
43
Locality In A Memory-Reference Pattern
CMSC 421
44
Working-Set Model
working-set window a fixed number of page references
Example: 10,000 instructions (or memory references)
WSSi (working set of Process Pi) =
total number of pages referenced in the most recent (varies in
time)
if too small will not encompass entire locality.
if too large will encompass several localities.
if = will encompass entire program.
D = WSSi total demand frames
if D > m Thrashing
Policy if D > m, then suspend one of the processes.
CMSC 421
45
Working-set model
CMSC 421
46
Keeping Track of the Working Set
Approximate with interval timer + a reference bit
Example: = 10,000
Timer interrupts after every 5000 time units.
Keep in memory 2 bits for each page.
Whenever a timer interrupts copy and set the values of all reference bits
to 0.
If one of the bits in memory = 1 page in working set.
Why is this not completely accurate?
Improvement = 10 bits and interrupt every 1000 time units.
CMSC 421
47
Page-Fault Frequency Scheme
Direct control for thrashing
Establish “acceptable” page-fault rates.If actual rate too low, process loses frame.
If actual rate too high, process gains frame.
If no free frames, reduce level of multiprogramming
CMSC 421
48
Other Considerations
Prepaging
Load a set of pages that expect to be needed
Page size selection
Internal fragmentation
Smaller pages lead to less fragmentation
table size
Smaller page size leads to larger page tables
I/O overhead
I/O with 1 large page is better than with 2 I/Os for pages of ½ size
Larger page size leads to bringing in useless data
Locality
Smaller page sizes capture locality at higher resolution
Page fault rate
Smaller page sizes lead to higher page fault rates
CMSC 421
49
Other Considerations (Cont.)
TLB Reach
The amount of memory accessible from the TLB.
Related to hit ratio when translating virtual addresses
TLB Reach = (TLB Size) X (Page Size)
Ideally, the working set of each process is stored in the TLB.
Otherwise there is a high degree of page faults.
CMSC 421
50
Increasing the Size of the TLB
Increase the Page Size.
This may lead to an increase in fragmentation as not all applications
require a large page size.
Provide Multiple Page Sizes.
This allows applications that require larger page sizes the opportunity to
use them without an increase in fragmentation.
Manage TLB in software
CMSC 421
51
Other Considerations (Cont.)
Program structure
int A[][] = new int[1024][1024];
Each row is stored in one page
Program 1 for (j = 0; j < A.length; j++)
for (i = 0; i < A.length; i++)
A[i,j] = 0;
1024 x 1024 page faults
Program 2 for (i = 0; i < A.length; i++)
for (j = 0; j < A.length; j++)
A[i,j] = 0;
1024 page faults
CMSC 421
52
Other Considerations (Cont.)
I/O Interlock
Pages must sometimes be locked into memory.
Consider I/O.
Pages that are used for copying a file from a device must be locked from
being selected for eviction by a page replacement algorithm.
CMSC 421
53
Reason Why Frames Used For I/O Must Be In Memory
CMSC 421
54
Operating System Examples
Windows NT
Solaris 2
CMSC 421
55
Windows NT
Uses demand paging with clustering. Clustering brings in pages
surrounding the faulting page.
Processes are assigned working set minimum and working set maximum.
Working set minimum is the minimum number of pages the process is
guaranteed to have in memory.
A process may be assigned as many pages up to its working set maximum.
When the amount of free memory in the system falls below a threshold,
automatic working set trimming is performed to restore the amount of free
memory.
Working set trimming removes pages from processes that have pages in
excess of their working set minimum.
CMSC 421
56
Solaris 2
Maintains a list of free pages to assign faulting processes.
Lotsfree – threshold parameter to begin paging.
Paging is peformed by pageout process.
Pageout scans pages using modified clock algorithm.
Scanrate is the rate at which pages are scanned. This ranged from slowscan
to fastscan.
Pageout is called more frequently depending upon the amount of free
memory available.
CMSC 421
57
Solar Page Scanner