Embed Size (px)
Citation preview
Technology Services and Support (TSS) University Information Technology (UIT)
1
Downloading the UHVPN Client and setting up Cisco VPN on Windows 7
Part 1: Downloading UHVPN 1. Go to the Software Downloads website: http://www.uh.edu/infotech/downloads/ 2. Select appropriate choice. 3. Click Log in. 4. Enter the following:
User name: Your CougarNet ID
Password: Your CougarNet Password 5. Click Login.
6. Select appropriate choice.
Technology Services and Support (TSS) University Information Technology (UIT)
2
Note: To find out what Operating System you have click Start, right click Computer, and select Properties.
Technology Services and Support (TSS) University Information Technology (UIT)
3
7. Click the drop down arrow on Save. 8. Click Save and Open.
9. Open vpnclient-winx64-msi-5.0.07.0290-k9. 10. Select vpnclient_setup.
Technology Services and Support (TSS) University Information Technology (UIT)
4
11. Click Run.
12. Click Next.
Technology Services and Support (TSS) University Information Technology (UIT)
5
13. Click I accept the license agreement. 14. Click Next.
15. Click Next.
Technology Services and Support (TSS) University Information Technology (UIT)
6
16. Click Next.
Note: Wise Installation Wizard appears.
Technology Services and Support (TSS) University Information Technology (UIT)
7
17. Click Yes.
Technology Services and Support (TSS) University Information Technology (UIT)
8
18. Enter the following:
User name: Your CougarNet ID
Password: Your CougarNet Password 19. Click OK.
20. Click Finish.
Note: Leave Remember my
credentials box unchecked.
Technology Services and Support (TSS) University Information Technology (UIT)
9
Part 2: Setting up Cisco VPN on Windows 7 1. Logon to Windows 7 using an account with administrative rights. 2. Right click on the Network Connections icon.
3. Select Open Network and Sharing Center.
4. Select Set up a new connection or network.
Technology Services and Support (TSS) University Information Technology (UIT)
10
5. Select Connect to a workplace. 6. Click Next.
7. If this window comes up select No, create a new connection.
8. Click Next.
Technology Services and Support (TSS) University Information Technology (UIT)
11
9. Select Use my Internet connection (VPN).
10. Enter the following:
Internet address: 129.7.254.232 or 129.7.254.233
Destination name: type VPN or UHVPN Connection 11. Click Next.
Note: Leave box
unchecked.
Technology Services and Support (TSS) University Information Technology (UIT)
12
12. Enter the following:
User name: Your CougarNet ID
Password: Your CougarNet Password 13. Click Connect.
Technology Services and Support (TSS) University Information Technology (UIT)
13
14. Click Close.
15. To verify you are connected click the Network Connections icon.
Technology Services and Support (TSS) University Information Technology (UIT)
14
How do I reconnect to the UH Virtual Private Network (VPN)? 1. Click on the Network Connections icon. 2. Click the VPN connection you set up. 3. Click Connect.
2
1
3
Technology Services and Support (TSS) University Information Technology (UIT)
15
4. Enter the following:
User name: Your CougarNet ID
Password: Your CougarNet Password
Domain: COUGARNET 5. Click Connect.
Technology Services and Support (TSS) University Information Technology (UIT)
16
6. To verify you are connected click the Network Connections icon.
Technology Services and Support (TSS) University Information Technology (UIT)
17
How do I disconnect the UH Virtual Private Network (VPN)? 1. Click on the Network Connections icon. 2. Click the VPN connection you set up. 3. Click Disconnect.
2
1
3
Technology Services and Support (TSS) University Information Technology (UIT)
18
4. To verify you are disconnected click the Network Connections icon.
Note: If this account does not have a password, then stop! Unless and until every user account on the computer is protected by a "good" (i.e., strong) password, you do not want your computer connected to the University LAN. It could be compromised within minutes, if not seconds. Sometimes firewalls and ports are blocked by ISP’s, routers, and other devices. If you suspect this is the case please contact us for further diagnosis and troubleshooting. UIT Help center contact information:
Email: [email protected]
Phone: 713-743-1411
Online: www.uh.edu/infotech or Live Chat
In person at Technology Commons MD Anderson Library Room 56
